Ultra bright amber LED turnsignals offer nearly the same visibility as OEM in a much smaller package. 15 amber LEDs in every signal. Flexible rubber stalks. Requires a LED turn signal to flash properly.
Pack of Two
Fits Honda CRF450L Motorcycles (Front Turn Signals)
OEM Fit Left Front and Right Front turn signal connectors with wires pre-attached.
This kit is specifically for attaching After-Market turn signals to the front of the CRF250L / Rally or CRF450L.
Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.
White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.
Dazzling bright Amber blinker functions.
All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.
Yamaha T7 Specific plug and play kit using factory connectors, flasher and block off plates included.
Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.
White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.
Dazzling bright Amber blinker functions.
All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.
Suzuki DR650 Specific plug and play kit using factory connectors, flasher and diode kit included.
Years in development, Yenkro Adventure Rally Fairings have been designed from the ground up to withstand even the most unforgiving terrain and now the gen 2 kit takes it to the next level. Battle-tested in conditions that only the Australian outback can muster, this fairing is a must for adventure riders from all corners of the globe.
Side Panels are Optional and Sold Separate, they work with Acerbis 6.6 gallon (25L) tank only. Available in either black or white.
Can be purchased with or without side panels.
Standard kit includes:
The standard lighting kit is a pair of Hella 60mm projectors, one for high and one for low, these are 60w halogens and are DOT and ADR approved.
Make the Edge-2 Circuit Board installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. You will need a crimp tool or set of needle nose pliers to crimp connectors on.
Make the Edge-2 installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. Will need a crimp tool or set of needle nose pliers to crimp connectors on.
The Edge-2 Tail Light and License Plate Holder is a simple bolt-on replacement for the stock unit. Included is an aluminum mount for the light and license plate that is model specific. The light unit uses 16 high-intensity red LED's for tail / stop light function. 3 white LED's are used for license plate illumination.
Included is a set of turn signal brackets that bolt to the mount, but these are designed for a smaller LED type signal with a mounting stud of just 8mm. Or consider the Edge-2 Upgrade Circuit Board as this converts your brake light into a functioning turn signal as well!
NOTE: LED's must be installed on a 12 V DC system!
This kit includes 2 needles that have been developed by JD Jetting and manufactured for them to their exacting specifications. These two needles allow a wide range of tuning possibilities and provide correct fuel delivery at any throttle position.
4 Allen type screws for the float bowl are also enclosed should you strip out the stock screws during your tuning process. Complete instructions with photos, jetting suggestions for different set-ups and situations, 4 Main Jets, a new Pilot Jet, and a drill bit complete the package.
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
Tune your stock carburetor for better power and response, easier starting and quicker warm up. Mikuni main and pilot jets.
The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely. With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.
Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune, Quickshifter or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.
All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device. This BASE map can be any of the available maps from the Dynojet website, or those you may have received from a third party.
Genuine Honda replacement thermostat
Works Connection Billet Plugs for your left side case. These blue plugs includes both the timing mark plug and the crankshaft access plug.
This kit provides much of the performance gain of our 130 kit but keeps you legal for racing classes that do not allow motors over 125cc.
Our kit includes 5 EBC friction plates which eliminates the judder spring assembly by replacing it with a 5th friction plate.
Heavy duty clutch springs by Barnett are included it this kit which will significantly decrease wear under high stress conditions.
Includes genuine Honda friction plates, drive plates, and clutch springs.
The Dirt Racer Complete Clutch Rebuild Kit is the ultimate package for your Yamaha, here's why:
'Stack Height' is the all important factor when renewing a clutch and riders are always best to buy a complete kit instead of separate single plates as sold by manufacturers. Replacing just the worn plate (or plates) may not even get close to rebuilding your clutch to its original stack height and all you get is clutch slip and the job has to be done again.
Since 1948, Barnett clutch plates and springs have been made from the finest materials available.
Heavy duty springs help prevent clutch slip in high-performance motors.
Includes all necessary top quality gaskets for top end rebuilds.
High quality stator cover gasket.
This kit includes the large O-Ring that goes on the end of the filter and the small O-Ring that seals the hole just above that. Both are factory Yamaha parts.
Top end gasket set with the addition of a factory Suzuki metal base gasket. A metal base gasket is essential because paper base gaskets will fail in the DR650.
Genuine Honda replacement oil filter cover gasket.
You will need to tune your EFI with something like the Power Commander V to get the most out of your Big Bore kit.
Providing unbeatable performance and exceptional value, Hiflo filtro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
Grab our 5-pack and save both time and money!
Providing unbeatable performance and exceptional value, Hi-Flo is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide.
Grab our 5-pack and save both time and money!
Providing unbeatable performance and exceptional value, Hi-Flo is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide.
Grab our 5-pack and save both time and money!
Raises compression from stock 9.5:1 to 10.5:1 for more power, torque and snappier engine response. The high quality forged piston from JE is almost a full ounce lighter than the stock cast piston. This makes for less vibration and a smoother running motor. Includes rings, pin, clips, and top end gasket set with valve stem seals and metal base gasket. Fits the standard size stock bore.
If you're plannig to or already have a stroker crank setup in your Yamaha WR250R/X, you'll need this stroker piston.
Features:
Designed to enhance mid-range and top-end power. Manufactured using the highest quality standards. No core required.
Note: This camshaft has been designed to work with the OEM Yamaha piston, or the BBR big bore kit piston, with OEM sized valves. Any other combination of parts will require that you manually check valve to piston clearance.
Bolt on horsepower! Stage 1: single-cam motor. Excellent midrange and top-end power increase. Uses stock valve springs and rockers.
Fitment Specs: Exhaust Lift: 5.9; Exhaust Duration at 1.00mm: 223°; Intake Lift: 6.8; Intake Duration at 1.00mm: 227°
This is a completely rebuildable stroker crank (3mm additional stroke) turns your mild mannered 250cc motor into a 263cc trail shredding monster! OK, maybe not, but sure makes it a fun machine.
Want the COMPLETE package? Order a Big-Bore kit to go with your stroker! That will give you a 308cc ripper! That is 24% larger than the stock 250. This package includes the Athena Big Bore Kit plus the 3mm Hot Rods Stroker Crank with new Genuine Yamaha crank bearings.
You will need to tune your EFI with something like the Power Commander V to get the most out of your Stroker kit.
For stock bore Hot Rods highly recommends you use the Vertex Stroker Piston Kit.
7.48mm diameter - Includes three valve shims of each size from 1.20 to 3.50mm in .05mm increments.
141 shims in total. 0.57 cents per shim! Does your local dealer have the shims you need?
OEM throttle cable set for the CRF250L
*generic image, actual cables may look different.
Handlebar mounts that replace your stock clamps.
These raise your handlebars 1 inch.
Available in 7/8" for standard handlebars allow installation of your choice of 7/8" off road handlebars.
This adapter will give you more mirror choices.
Yamaha mirrors have reverse threads on the right (throttle) side of the handlebars. This adapter allows you to mount a mirror with standard 10mm threads on the right side of your handlebar. This opens up many options for your mirrors, choose any 10mm mirror for your Yamaha.
The Speedo DRD corrects and fixes the speed signal after it was altered by something else, such as sprocket changes or tires size changes or transmission changes.
The Shorai LFM Standard Recommendation is the best overall pick for most applications, and has been selected to give strong cranking performance and long lifespan.
Measures 4.5" x 3.5" x 2.28"
Weight (lbs): 1.34 lbs
Weight (kg): 0.61 kg
Cold Cranking Amps: 135
Polarity: [- +]
Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box.
A CNC machined Chain Guide that is considerably stronger than the stock plastic unit.
428 x 130 links. High Quality non-ORing chain. Rust-resistant gold plated chain for high powered racing machines.
Based on Advanced Ceramics, this compound is designed to deliver excellent performance in all aggressive scenarios. It offers fast heat recovery for more consistent braking which, in turn, gives the rider more "feel" and control. These pads are easy on rotors since they do not have the same levels of metallics in them as many O.E.M. and after-market brands.
Made with heat-treated carbon steel for longer wear life and reduced galling. Stock size, simple bolt-on procedure.
This beautiful polished rear carry rack from B&B Eng. is made from aluminum tubing and 4mm 5083 plate. 5083 is used because of its suitability for welding and high level of abrasion and impact resistance. Kit includes all the necessary stainless clamps and bolts. With the roundness and strength of the tubing supports, it makes a great grab handle when you need to lift the rear of the motorcycle.
A small light-duty Dual Sport Rack for the WR. Precision laser cut from 3/16" 5052 aluminum. It is powder coated black with a shot-peened look. This rack is 9" x 10.5" at widest points and has numerous tie points for straps or bungees. It's pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in about 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.
This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.
It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.
Comes complete with all hardware and easy install instructions.
The Dakar pack has been designed for those rides where you find yourself a long way from home. Offering enough storage (22.5L) and versatility for the true adventure rider, the Dakar pack has a number of internal organized pockets for all your gear, whilst still maintaining enough free storage space to maximize flexibility. Durable 1680D waterproof fabric construction ensures the Dakar is up to the task of long endurance rides.
The unique multi-tier external pocket system gives you quick access to any compartment without having to loosen off the entire pack every time. Internal to the pack is a fully padded AV pocket with cable ports for external cable routing, a soft-lined goggle pocket and a vented mesh breathable storage pocket. The Dakar pack would not be complete without the Source Widepac 3L hydration system and the CE certified Level 2 removable back protector supplied.
Construction 1680D Poly Fabric
– YBS water resistant zips with rubberized all weather pulls
– CE Level 2 Back Protector EN 1621-2
– Capacity 22.5 lt
– Removable waist belt and Shoulder harness
– Nine (9) storage pockets
– Shark Fin air flow optimized back padding
– CONFIGR8 ladder lock adjustment system (tool free)
– 3lt hydration system
– Weight 4.3 lbs (With pack shield and hydration system.)
– Weight 3.3 lbs (Pack only).
– Length 19.5″ – Width 11″
– Multi Tier external access stowage.
– Durable Duraflex buckles
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
State-of-the-art replacement seats, Sargent seats are built on a percision-molded lightweight Polytec seat pan. Sargent's proprietary seat foam (Super Cell Atomic Foam) is their own unique blend of resilience, firmness, and vibration-absorption qualities, making it well suited for long distance comfort and support. Sargent seats are covered in a marine-grade, UV-stablized mildew resistant CarbonFX vinyl. These seats will fit bikes with the stock, IMS, or any other aftermarket fuel tank.
This is a high-quality seat cover kit by Moose for the XR650L. This is a direct replacement seat cover only. No seat foam, and you install on your stock pan with existing foam. Heavy duty marine grade vinyl, and UV protected for long life. Double stitched for durability. Available in Red or Blue.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
New wider seat to help keep comfortable on that long commute or dual-sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
The Foam and Cover Kit is only for the OEM pan. It DOES NOT include the pan.
Only Available in Tall; All Carbon Fiber
| Width: | 9.5" (241mm) |
| Height | 1" (25mm) TALLER than the stock seat |
This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
Light weight and strong. These DRC foot pegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.
Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.
Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.
Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.
Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with crosslinked polyethylene for extra strength and durability.
Natural color is recommended to easily see the fuel level in the tank. Includes cap and fuel petcock.
B&B Off Road's Honda CRF250 Rally bash plate is made from 4mm aluminium 5083 plate. This grade of aluminum is chosen because of its extreme suitability for welding and abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Bash plate is installed after first removing the lower OEM plastic bash plate/fairing.
Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.
They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.
Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.
Mounting hardware and instructions included.
The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike. Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.
Features:
Available in 2 colors
Protect your frame/paint from scuffs and scratches with these great Frame Guards from B&B Engineering Made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.
THE MOST ADVANCED RADIATOR PROTECTION SYSTEM AVAILABLE FEATURES
1. Maximum side and front impact protection-Using a combination of CNC machined 6000 series 3 dimensional aluminium extrusion and 5000 series alloy plate we have created a system to protect your rads from virtually every direction
2. Maximum roost and debris protection- Due to the angle fin design there is very little of the radiator core and veins that are directly exposed to roost, debris and trail side sticks
3. Maximum airflow -B & B’s unique aluminium front louver panel constructed from high strength extrusion allows 3 dimensional fins to be incorporated into the design to mimic the airflow characteristics of the genuine plastic fins
4. Removable finned louver panel- Front panel only requires 2 bolts to be loosened to allow for easy removal for cleaning
5. Integrated modular construction- Three piece modular construction allows for greater design flexibility eliminating the compromises inherent with one piece designs
6. Easy fitment no mods required- Guards can be fitted in approx ½ hour using basic tools
7. All parts available individually- If you damage any part of the radiator guards, B&B's design allows you to purchase only what you require.
From JNS Engineering, a super solid Rear Master Cylinder Guard for the XT250, WR250R and X. CNC formed and then powdercoated black for lost lasting corrosion protection. Did we mention how good it looks? All hardware provided.
Master Cylinder guard by Moose Racing will protect the exposed rear brake master cylinder from damage
TW200 billet oil drain cap plug.
Nice billet aluminum replacement for the old cast oil drain cap.
For easy removal of recessed oil filters.
Conical point screws pierces and grabs the metal end cap of the filter.
reduces potential damage to the engine cases.
NOT for use on re-usable oil filters.
The easy way to lubricate the cables on your motorcycle. Lubricates completely in five seconds!
Features:
The MotoPressor Puncture Repair Tool combines the four tools essential for tubeless tire repair into a single tool.
With the motorcyclist in mind, they've designed a "4 in 1 multi-tool" that uses pre-vulcanized repair strings and packs into a sheath measuring a mere 130 x 68 x 50mm, that's small enough to fit in your pocket. The tool contains a pair of pliers, a rasp, an insertion tool and a sharp knife, which is all you'll need to fix 99% of punctures. The repair strings are pre-vulcanized, so they've done away with the "little tube of glue". The repair plugs the hole AND leaves a "patch style" repair on the INSIDE of your tire.
If you'd like to see the tool in action go just click HERE, and watch the demo.
Lighter and stiffer than stock, these high quality straight rate springs are custom made specifically for the TW200. No adapter is needed! A proper rear spring will give a smoother more controlled ride. No more bottoming and better traction and confidence off-road.
If you (with all your gear on) weigh up to 220 lbs, you want the 15 kg/mm spring. 225 lbs and up will want the 19 kg/mm spring.
Custom developed by BBR Motorsports for the ultimate upgrade for mini four-strokes. Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids.
Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.
OEM spring rate is .46kg. We offer stiffer spring rates from -5% to 10% for riders who wish to carry luggage or just prefer stiffer suspension.
5% Less than stock
Complete set of custom made Buchanan's stainless steel spokes with blue zinc plated nipples. Includes enough spokes and nipples to lace up one wheel.
Required information needed when ordering:
(Please provide this information in the comments section when placing your order)
1. Year, Make, Model
2. Is your wheel and hub OEM or aftermarket?
3. Size of your rim
Contact us before removing your wheels as some bikes will need measurements taken before spokes can be ordered.
We start with Excel or Sun rims, OEM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.
Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
We start with an Excel rim, OEM hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Optional upgrades include SUN rims available in 3 colors.
Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.
Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.
Complete set of 'Adventure' wheels. These are the same rim sizes as used by the BMW GS and other big adventure bikes. The 19" front and wide 17" rear will give you great twisty road handling on the pavement while still being dual-sport friendly.
We start with silver Excel or Sun rims, OEM hubs and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.
Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
We start with an Excel rim, OEM hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Optional upgrades include SUN rims available in 3 colors.
Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.
Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.
Replace your lost or broken stock plastic chain guard with a JNS aluminum one. Laser cut, CNC formed, TIG welded, and powder coated a beautiful satin black. This is a direct replacement for the stock unit.
Please note that this unit is a bit wider than the stock one and will have to be trimmed if you are running a big fat SuperMoto wheel/tire.
A Dual Compound radial for performance street riding.
Tread surface divided into three separate areas featuring two different rubber compounds.
Softer shoulder rubber provides phenomenal cornering grip.
Lean angle up to 51.2°
Tubeless and W rated (max speed of 168 mph)
Designed specifically for Dirt Drack racing for mini racers. Tread design can be customized to meet each rider's needs to provide superb traction and stability on any race track.
120/70-17
Not DOT approved for street or highway use!
This Clymer Repair Manual is an essential resource for anyone looking to service or repair their motorcycle at home. Whether you're riding at the weekend or using your bike for a daily commute, you don't want your plans disrupted - performing regular maintenance is crucial to keep things running smoothly.
Every Clymer workshop manual is the result of a full stripdown and rebuild, allowing you to really know the detail behind your bike. Alongside step-by-step instructions and expert advice, you'll find a wealth of images that help to guide you through repairs and servicing tasks, even on small and complex parts.
What's Included
(This manual's year range represents the years of coverage available when the manual was written. The vehicle or machine's production years may extend beyond these dates.)
With a Haynes manual, you can do it yourself…from simple maintenance to basic repairs. Haynes writes every book based on a complete teardown of the motorcycle. Haynes books have clear instructions and plenty of photographs that show each step.
Complete coverage for your Yamaha Trail Bikes covering PW, RT, TT-R and XT225/350 models for 1981 thru 2000.
Universal 3 bolt flywheel puller.
Complete with hardware kit and adapter for male or female removal.
We start with Excel or Sun rims, OEM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.
Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
Time to freshen up your forks? Three pack or single 16oz bottles of Maxima fork oil that will refill your tubes after any fork job. This is a high-quality fork oil and what we use on our projects here at ProCycle.
For most situations you will use 10w Fork Oil. Some custom applications will use the 5w or 15w oil. Order the 5w oil if you have Ricor Intiminators or Cogent DDCs.
The high rigid and light weight design, provides better control of the rear brake.
The clevis body is made of A7009-T6 aluminum. Comes with a specially designed stainless steel pin.
Replacement side panels from ProCycle (formerly DSA). These pieces are fully compatible in any combination with the original factory plastic. These side panels have a crisper, more angular look than stock. Vacuum molded, they are a design improvement over the stock panels.
Sold in pairs
Does not include heat shield. Depending on your application and preferences, more than one optional heat shield may be useful.
