Keep your smartphone, GPS and/or MP3 charged while enjoying your ride. Water- and weather-resistant, the Dual USB Port/Plug Charger offers you 5-Volt/2-Amp dual USB ports that have an inline fuse for protection. It comes with 38" of wire and 12" long battery quick connect rings. The mounting bracket that is included fits 7/8" and 1" bars.
ProCycle currently has reduced staffing due to our state governor’s policies. Orders will be processed as efficiently as possible. Your patience is appreciated.
The TAPP Lite is a compact, easy to mount, all weather 1.5amp USB Power Port and is the answer for powering and charging your USB devices including cell phones, most smart phones*, most GPS units, MP3 players, and some digital cameras.
Power port connects from battery to handlebars using included universal mount.
The TAPP Gen5 is a compact, easy to mount, all weather 2.1amp USB Power Port and is the answer for powering and charging your USB devices including cell phones, smart phones, most GPS units, MP3 players, and most digital cameras.
Quick charge 3.0 technology provides fast charging for Android devices with Quick charge capability. Charging power levels up to 18 watts contrast with the USB standard maximum charge power of 10 watts.
Select the correct TAPP for your application by clicking on "More Information".
Laser cut from stainless steel. This is a quick and easy bracket for mounting a key switch, panel mount, bulkhead fitting or anything that requires a 1 inch hole.
The Optimate Cable O-20 is a SAE weatherproof bulkhead/panel mount power source. Main body fits a 1" dia. hole. Overall length of the unit is 12" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors. We also offer an optional stainless steel bracket that you can bolt on wherever you like. This makes a clean installation and you won't have a charging cable hanging loose.
Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead for when you don't have something plugged in. Unit has a 3-year limited warranty.
Don't have an SAE plug attached to your battery? Choose the add on below.
This USB device connects to a battery cable with an SAE connector just like the typical Battery Tender outlet, and allows you to charge your electronic devices. Input is 12 Volts, with an output to the USB port of 2.1A maximum, perfect for your phone or other USB devices.
This is an adhesive-backed foam kit, for the installation of small batteries into larger battery tray areas. Keep in mind that all Antigravity Small Case Batteries DO come with adhesive-backed foam in the box. This kit is for when you need extra foam or are doing installation in another vehicle.
- Hi Density adhesive backed foam
- Help reduce vibration
- Easily cuts with scissors or razor knife
- 3 pieces of 6″ x 3″ x 0.5″ adhesive-backed foam
The standard ring connector is a simple, quick connection with a fused positive ring cable and negative cable that attaches directly to your battery with an industry standard 2-pin, SAE connector.
The weather protected ring connector is a premium quick connect permanent battery lead with weather protected connection system and cable. It features 1/4"/M6 ringlets, 20" L, Industry standard 2-pin, heavy-duty SAE connector, 15A fuse, Cable max rating: 5 Amps, Cable remains flexible at below freezing temperatures; rated for -40°F/-40°C.
Optimate 1 Global Charger-Maintainer
This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid (STD, AGM, GEL) and 12.8V/13.2V Lithium (LFP) batteries without overcharging. Ideal for vehicles that are seldom or seasonally used, or kept in storage. Global Three-step charging program ensures effective charging of the battery and is safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or if battery is disconnected. Dust proof case with wall mounts and 6ft AC supply lead and 6 ft charge lead ending in SAE connector. Weatherproof battery lead & OptiMate battery clip set included.
The Battery Tender Junior Selectable is a trickle charger with a brain. It will keep your Lead Acid, AGM or Lithium battery fully charged so that it is ready to go when you are. It's fully automatic, compact, and lightweight.
This smart charger has battery chemistry selection and will automatically sense and select the battery type, then complete a 4-step charging program, (Initialization, Bulk Charge, Absorption Mode, Float Mode) with a max output of 800mA. It will automatically switch to float/maintenance voltage after fully charging the battery. If the battery voltage drops too low, full charging output resumes. It also has a two color LED that indicates state of charge.
Reverse hookup is mitigated with reverse polarity protection.
Includes a 12 foot output cord, a 5 year warranty and the fact that it meets CA and OR appliance energy efficiency standards for battery charging systems make this a great little unit.
You can charge your Shorai battery with a regular battery charger but, if you want the very best for it this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term maintenance storage.
Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.
For Shorai Lithium Iron batteries only
This bright and compact 6-LED flashlight plugs right into your SAE battery charging socket for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. It features a 40 inch cord so you can see in those out of the way places when you need to.
Small 2 3/4" diameter motorcycle horn. Works on 12v DC. Sound will be diminished when running on AC.
- Optional plastic dashboard with indicator lights protects the computer and places it in an optimum viewing position
- Included mounting bracket installs easily to the triple clamp on most motorcycles
- Includes an assortment of indicator light lenses allowing customization to fit your needs
- For use with Trail Tech Vapor Speedometer/ Tachometer (sold separately)
A portable device that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices via USB cable.
- XP-1 is 6" x 2 7/8" x1" 14oz.
- XP-3 is 5" x 2 7/8" x 1" 12oz.
- Holds a charge for up to 1 year.
- Includes the Battery Harness (listed above) along with a 5’ long jump start extension cable (capable of handling 2000 amps!) with 2 BMW style plugs which allows you to jump start vehicles by just plugging them together
- Also includes 2’ 3” long alligator clip leads with female BMW style ends, waterproof caps included
Temporarily out of stock, No current available ETA. Ordering now will ensure fastest delivery.
A multifunctional mini starter that jump starts a motorcycle and eliminates the need to carry jumper cables. The Jump Start Pack includes an LED torch and 2/4-Amp, USB output port for charging tablets, phones and other devices.
- Protects against overvoltage and power inversion
- Light and compact
- Peak power: 400-Amps
- Mini Speedometer is only 2 inches diameter.
- Works with Japanese speedometer or odometer cables.
- Mounts to handlebar bolt or use the bar clamp supplied.
- Illuminated dial for night riding.
- Smaller, lighter and more accurate than the stock unit.
A digital voltmeter that can be mounted almost anywhere, on any bike, thanks to ProCycle's multi-position stainless steel bracket. Keeps you informed on the status of your charging system. Completely waterproof and comes with connectors, wires and thorough instructions. A "must have" device for riders who use heated riding gear, heated grips, additional lighting, GPS, etc.
Deltran quick-connect plug with LCD voltmeter display. Plug this into your Battery Tender, or any SAE cable, for an LCD display of the battery voltage. Three LED lights indicate the state of charge as well.