Same-day shipping cutoff: Noon Pacific Time

Search Products

Suspension

Lowering Link

KLR650 '87 - '07

Billet aluminum lowering links. Lowers the rear suspension approximately 1 to 2 inches depending on application.

*Important when lowering the rear suspension you want to raise the fork tubes in the clamps an equal amount of inches that the rear is being lowered. That way your bike will sit level when done.

Note: We only recommend the 2" lowering links for lighter non-aggressive riders as they allow the tire to rub when near bottoming.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Some KLR models from 2004 - 2007 may have a longer shank that do not allow the bolts to tighten to the bearing. If that is the case, we recommend the addition of either a 14 mm split type lock washer or a 15 mm flat washer under the nut of both link mounting bolts.

Choose Year/ Length
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after July 2025
$88.95

Forks

The complete fork upgrade kit - Race Tech springs and emulators. Also includes a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.

Choose Spring Type & Year
Ships in 3-5 business days
$339.95
DRZ400S '00 - '24 DRZ400E '00 - '07 DRZ400 '00 - '03

DRZ400 E/S

A pair of Race Tech fork springs to dial in your front suspension to suit your weight.

Fits all DRZ400 models with conventional forks (not for SM)

Recommended spring rates:

Rider Weight w/gear lbs.Spring Rate
90 or less.42
90-119.44 (stock)
120-150.46
150-180.48
180-220.50
220-250.52
250+.54
Ships in 3-5 business days
$149.95

Shock Bearings & Seals

DR650 '96 - '26

Complete kit to replace the bearings and seals in the DR650 shock linkage. Includes the lower shock bearing.

Kit Contents:
Seal8
Needle Bearing Shaft4
Needle Bearing6
Add Grease
Add Anti-Seize
Ships in 3-5 business days
$102.95

Shock

DRZ125 '03 - '26 KLX125 '03 - '06

Custom developed by BBR Motorsports for the ultimate upgrade for mini four-strokes. Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids. Fits stock DRZ125 shock.

  • 30% stiffer than stock
  • Preset and stress relieved for long life
  • Custom wound from aircraft quality spring steel
  • Powder coated finish
Ships in 3-5 business days
$129.95
DRZ400S '00 - '24 DRZ400E '00 - '07 DRZ400SM '05 - '24 DRZ400 '00 - '03

Race Tech shock springs in a wide range of spring rates to dial in your rear suspension to suit your weight (stock spring is 5.3 kg/mm). Recommended spring rates:

Rider Weight w/gear lbs.Spring Rate
100 or less4.6
100-1244.8
125-1495.0
150-1745.2
175-1995.4
200-2245.7
225-2746.0
275 +6.3
Ships in 3-5 business days
$149.95

Swingarm

DR650 '96 - '26 DR350 '90 - '99 DR350S '90 - '93 DR350SE '94 - '99

Complete kit of OEM quality parts to replace the bearings and seals in the swingarm pivot.

Add Grease
Ships same business day
$85.95

Gas Tanks

CRF250L '13 - '16

Acerbis fuel tanks were designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service.

* Will not fit 2017 Model

Choose Color
Please contact us for availability information
$285.95
DR650 '96 - '26

Get better range from your DR650 by adding an IMS 4.9 gallon fuel tank. Available in Natural, White, Black and Blue. Natural color is recommended if you wish to easily see the fuel level in the tank. Includes cap and fuel petcock.

Ships same business day
$347.95

We've been asking for a bigger tank for years and it's finally happened. This is the big brother to the very popular 5.3 gallon Acerbis tank with some modifications to add another gallon and a half of capacity. It's the same width between the knees but extends wider and further forward in front of the knee pockets. This high capacity fuel tank incorporates modern lines and high quality construction that can't be beat. Includes gas cap, petcock and all mounting hardware.

  Installation of the Acerbis tank requires relocation of the front turn signals, otherwise the stock signals will contact the tank at full lock. Our Turn Signal Relocation Brackets move the front turn signals up and forward to clear the bigger tank.

Add Turn Signal Brackets
Ships same business day
$369.95
DRZ400E '00 - '07 DRZ400 '00 - '03

More range at a great price.

The 3.6 gallon tank is for the off-road DRZ400 and DRZ400E.

The 3.9 gallon tank for the dual-sport DRZ400S. The 3.9 gal tank also fits the ES and SM models.

Both tanks are available in a selection of colors.

NOTE: Clarke tanks do not come with a vent hose or vent cap.

Ships same business day
$259.95
XT225 '92 - '07

The new 4.1 gallon fuel tank from Clarke. Carries almost 2 more gallons than the stock tank. Available in Blue, Black, Silver, White or Natural

Ships in 3-5 business days
$259.95
XR650L '93 - '26

Get better range from your XR650L by adding a Clarke 4.7 gallon fuel tank. Cannot use stock shrouds.

Available in Natural, White, Black, and Red. Natural color is recommended if you wish to easily see the fuel level in the tank. Includes cap, uses stock petcock.

Ships same business day
$259.95

Accessories

Universal fit. May require additional adjustment or modification.

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank.

This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out.

Machined from billet alloy and anodized for good looks.

  Not for stock fuel tanks!

Ships same business day
$11.95
DR350SE '94 - '99 DR350S '90 - '93 XR650L '93 - '26 CRF250L '13 - '26 DR650 '96 - '26

If you need a replacement cap for your Acerbis tank, why not go bling? These caps have a carbon fiber pattern molded into them that is extremely realistic. Looks like the real thing. Topping off the cap is a CNC Machined metal vent cap. This eliminates the need for a lengthy vent tube that gets in the way. The vent cap allows air to vent into the tank but does not allow fuel to splash out during normal use or during a tip over.

  These caps fit Acerbis tanks only.

Ships same business day
$24.95

Chemicals

Universal fit. May require additional adjustment or modification.

Filling and bleeding a Magura hydraulic clutch does not need to be a routine chore and should only need to be done when air infiltration within the system is suspected. Magura uses mineral oil, which does not absorb moisture from the environment, to lubricate the whole system.

Note: Magura hydraulic systems use ONLY mineral oil. Do not introduce DOT brake fluid of any kind into a hydraulic system designed to use mineral oil as this will cause corrosion to the internal seals and system failure may result. The only time anyone should ever need to replace the hydraulic fluid in a Magura system is following a hydraulic line exchange, a system upgrade, a crash which has damaged the system components or in a situation where a lack of fluid within the system has been diagnosed by poor lever feel.

If you do need to bleed your Magura hydraulic system, their custom made kit does indeed make that chore easier.

Choose Size
Ships in 3-5 business days
$9.95

Exhaust

Full System

Race, RS-4, Slip-On, Stainless Steel with Carbon Fiber End Cap

  • Pentagonal-shaped muffler
  • Maximized internal volume
  • Polyresonant duplex front chamber
  • Stepped, two-stage core baffle
  • Spark Arrestor/Sound Insert Compatible
Choose System
Ships in 3-5 business days
$548.95
DRZ400S '00 - '24 DRZ400SM '00 - '24

The race-bred RS-2 exhaust has proven to be extremely popular among rider looks for a combination of performance and value. It enhances performance dramatically, provides an enviable exhaust note and offers the unmistakable look and sound of Yoshimura. RS-2 mufflers feature a straight baffle that leads to a single turn-down machined aluminum end cap.

All models have a USFS Approved spark arrester in a oval-shaped sleeve with a large volume of packing material.

Choose Finish
Ships in 3-5 business days
$799.95

Gasket

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but the all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.

Ships same business day
$25.95

Muffler

Universal fit. May require additional adjustment or modification.
  • Reduce exhaust sound by one to six decibels
  • Options for DG V2 & RST and for the older "O" & "R" Series mufflers
  • Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
  • Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
  • 1" Not recommended for RST
  • Each size is sold separately
  • Works with DG V2 & RST mufflers
Ships in 3-5 business days
$44.95

Headpipe

XR650L '93 - '26

Did you snap a headpipe bolt on your XRL or are your headpipe bolts looking a bit dingy and rusty?

These replacement header exhaust stud bolts are made of super corrosion resistant 316 stainless steel.  They provide excellent resistance to chemicals and saltwater to give your exhaust system a hassle free service life.  

If you've got an older XR650L, you know the struggle of removing the O.E. nuts from the studs.  They either snap, remove the stud or come off as they should.  At some point you're likely to snap on or come across a seized nut to stud.  These bolts are a superior upgrade to the O.E. nut and stud.

Kit includes: 4 Stainless Steel bolts

Ships same business day
$7.95

Fuel and Intake

Jet Kit

DRZ400 '00 - '03 DRZ400S '00 - '24 DRZ400SM '05 - '24

This kit is for the 36mm Mikuni CV carburetor and includes 2 Needles that have been developed by JD Jetting and manufactured for them to their exacting specifications. These two needles allow a wide range of tuning possibilities and provide correct fuel delivery at any throttle position.

4 allen type screws for the top of the carburetor are also enclosed should you strip out the stock screws during your tuning process. Complete instructions with photos, jetting suggestions for different set-ups and situations, 5 Main Jets, a Pilot Jet and a drill bit complete the package.

Choose Option
Add Pocket Tuner Tool
Ships in 1-2 weeks
$84.95

Geared for the do-it-yourselfer that already has a TM40 or HS40. This kit supplies everything you need to convert it for use on your bike.

Kit includes intake and air boot adapters, throttle cables, choke knob, accelerator pump nozzle, a wide selection of main and pilot jets plus a TM40 tuning manual.

Choose Bike Model
Add Pocket Tuner Tool
Ships same business day
$169.95
KLR650 '87 - '18

This kit includes 2 Needles that have been developed by JD Jetting and manufactured for them to their exacting specifications. These two needles allow a wide range of tuning possibilities and provide correct fuel delivery at any throttle position.

4 allen type screws for the float bowl are also enclosed should you strip out the stock screws during your tuning process. Complete instructions with photos, jetting suggestions for different set-ups and situations, 5 Main Jets and a drill bit complete the package.

Add Pocket Tuner Tool
Ships in 1-2 weeks
$84.95

Carburetor Repair Kit

DR650 '96 - '26 XR650L '93 - '26 KLR650 '87 - '18

Has your TM40 carburetor been sitting for too long and now needs to be rebuilt? Then what you need is this TM40 Rebuild Kit that contains Genuine Mikuni replacement parts.

This kit includes:

  • Needle Clip and Washer
  • Top Cover Gasket
  • A/P Nozzle O-Ring, Plug and Rubber Cap
  • Fuel Screw O-Ring, Washer and Spring
  • Float Bowl O-Ring
  • Pilot Fuel Screw
  • Drain Plug O-Ring
  • #3.8 Needle Valve Assembly
  • O-Ring for the Starter Circuit and Needle Valve
  • New Screws for the Float Bowl
  • Vent Hose
Add Pocket Tuner Tool
Ships in 1-2 weeks
$39.95

Here is the O-Ring that fits in the carburetor manifold. This is the manifold that holds the carb up to the cylinder head. The O-Ring mounts between this manifold and the cylinder head. When this O-Ring fails it allows air into your cylinder and makes your Air Fuel ratio too lean which causes the engine to run too hot.

Ships in 3-5 business days
$14.95

Air Filter

KLX230 '20 - '20 KLX230R '20 - '21

Here's a UNI dual layer foam air filter element for the KLX230. Needs to be treated with air filter oil like any other foam filter.

  • Designed to fit in the factory air box exactly like original filter
  • Unique two stage design allows for easy and complete cleaning
  • Dual layer of foam, can be serviced separately
  • Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"
No Toil Care Kit
Please contact us for availability information
$24.95
DR650 '96 - '26

Twin Air's high quality materials and superior construction deliver unbeatable performance and protection. The hands-down choice of more World and National Champions than all other filters combined.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.

Ships same business day
$38.95

Electrical

CDI

Hot Shot Series Honda CDI Box; Rick's aftermarket Hot Shot CDI box has a hotter spark than OEM and retains the stock curve. It will replace OE# 30410-MN9-003 & 30410-MN9-000 and fit 1993-2021 XR650L. *CDI Boxes are not covered under the One Year Warranty.

Ships same business day
$129.95
KLR650 '87 - '18 XR650R '00 - '07

The Trail Tech Vapor Speedometer/Tachometer units are custom designed for an exact fit. They feature a bright white backlit LCD display, waterproof connections, and all parts needed for a complete installation. These units accept AC and DC power input, and automatically switch to internal power if external power is removed. Power connectors are included. Permanent solid-state memory guarantees that data is never lost, even without power. Units are available in black.

Trail Tech provides a one year warranty and unlimited free phone and email support.

Unit functions:

  • Speedometer
    • Current Speed
    • Maximum Speed
    • Selectable MPH/KMH Display
  • Tachometer
    • Real-Time RPM Bar Graph
    • Numeric RPM Readout
    • Dual Programmable Shift Lights
    • Up to 20,000 RPM
  • Temperature
    • Ambient Temperature
    • Engine Temperature (liquid cooled only, optional air cooled sensors available)
    • Dual Programmable Temp Lights 
  • Distance
    • Adjustable Distance
    • Permanent Odometer
    • Selectable Mile/Kilometer Display
  • Clock
    • Hour Meter, Stop Watch, Ride Time
    • Accumulated Ride Time
    • Permanent Hour Meter
Select Model
Ships in 3-5 business days
$179.95

Battery

DR650 '96 - '26 XR650L '93 - '26

The ultimate factory activated lead-acid battery upgrade from stock.

40% more amp-hour capacity and 70% more cold cranking amps (230) than the stock battery. This is a genuine YUASA battery. Lasts longer and has increased vibration resistance. Ships pre-filled, sealed, and ready for use.

Note: This battery is taller than stock. The factory battery strap cannot be used to secure it. Factory-activated batteries should be charged once a month when not in service.

Dimensions: 6" x 3-7/16" x 4-3/8"
Weight: 8.5lb
12V/11.2AH 230cca
Positive terminal location: Left Front 

Ships in 3-5 business days
$253.95

Tires

Dual-Sport

VanVan 200 '17 - '26 TW200 '87 - '26

The Shinko 244 is a very popular tube-type upgrade for the front tire on the TW200 or the VanVan. DOT approval coupled with excellent performance both on and off-road make this tire a winner!

The 244 Series dual purpose street and trail tire is designed to be equally at home on dirt or pavement.

  • Adventure Trail
  • Dual purpose street and trail design
  • Designed to be equally at home on dirt and pavement
  • DOT approved

Available in 5.10-18 (69P load / speed rating) and 4.60-18 (69S load / speed rating).

Choose Size
Ships in 3-5 business days
$128.95
Universal fit. May require additional adjustment or modification.

This street-legal knobby from Pirelli has good stability and cornering precision thanks to the carcass stiffness. The tread pattern optimized for use on dirt and gravel roads, cross-country racing and desert tours. It has lasting off-road performance and knob tearing resistance due to the special off-road compound.

Ships in 3-5 business days
$150.95
Universal fit. May require additional adjustment or modification.

Dunlop designed the D606 tire to be street-legal but with an emphasis on aggressive off-road riding and great durability. A full-depth tread pattern designed for rigorous off-road use yields excellent traction on everything from hard-packed fire roads to soft single-track trails. At the same time, the D606's tread compound is engineered for good highway durability and grip.

The Dunlop D606 is R rated (max speed of 106 mph)

Ships same business day
$175.95
Universal fit. May require additional adjustment or modification.

The 244 Series Dual Sport street and trail tires were designed to be equally at home on dirt or pavement. Great value.

  • DOT approved, tube type
  • 4-ply rating
  • All sizes designed for front or rear fitment
Ships in 3-5 business days
$64.95

Supermoto

Universal fit. May require additional adjustment or modification.

From Shinko Tire, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. This aggressive tread pattern provides excellent wet and dry weather adhesion.

Note: Tires in the dropdown menu with an -R behind them indicate Radial Tires.

Ships in 3-5 business days
$161.95

Tubes

VanVan 200 '17 - '26 TW200 '87 - '26

Replacement Inner Tubes for your VanVan or TW200. Always a great idea to carry a spare on your adventures as the rear tube is often hard to find.

Ships same business day
$14.95

Brakes

Rotor

DR650 '96 - '26

Made with heat-treated carbon steel for longer wear life and reduced galling. Stock size, simple bolt-on procedure.

Ships same business day
$133.95

Brake Line

DR350 '90 - '99 DR350S '90 - '96 DR350SE '90 - '99

GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

  • Significantly improves response and feel over factory rubber lines
  • Largest performance improvement for your money over any other braking upgrade
  • Stainless steel hose resists abrasion and puncture
  • Teflon core does not degrade over time like rubber lines
  • PTFE Dupont 64 Teflon® hose
  • Feature a heavy-duty stiffener sleeve and route just like the factory lines
  • Proprietary, premium fittings
  • Banjos utilizes a unique machined channel and sealing surface for leak-free installations
  • R&D and engineered in the USA
  • GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
Choose Type
Add Brake Fluid
Ships same business day
$64.95

GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

  • Significantly improves response and feel over factory rubber lines
  • Largest performance improvement for your money over any other braking upgrade
  • Stainless steel hose resists abrasion and puncture
  • Teflon core does not degrade over time like rubber lines
  • PTFE Dupont 64 Teflon® hose
  • Feature a heavy-duty stiffener sleeve and route just like the factory lines
  • Proprietary, premium fittings
  • Banjos utilizes a unique machined channel and sealing surface for leak-free installations
  • R&D and engineered in the USA
  • GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
Choose Type
Add Brake Fluid
Ships same business day
$64.95

GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

  • Significantly improves response and feel over factory rubber lines
  • Largest performance improvement for your money over any other braking upgrade
  • Stainless steel hose resists abrasion and puncture
  • Teflon core does not degrade over time like rubber lines
  • PTFE Dupont 64 Teflon® hose
  • Feature a heavy-duty stiffener sleeve and route just like the factory lines
  • Proprietary, premium fittings
  • Banjos utilizes a unique machined channel and sealing surface for leak-free installations
  • R&D and engineered in the USA
  • GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
Choose Type
Add Brake Fluid
Ships in 3-5 business days
$74.95

GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

  • Significantly improves response and feel over factory rubber lines
  • Largest performance improvement for your money over any other braking upgrade
  • Stainless steel hose resists abrasion and puncture
  • Teflon core does not degrade over time like rubber lines
  • PTFE Dupont 64 Teflon® hose
  • Feature a heavy-duty stiffener sleeve and route just like the factory lines
  • Proprietary, premium fittings
  • Banjos utilizes a unique machined channel and sealing surface for leak-free installations
  • R&D and engineered in the USA
  • GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
Choose Type
Add Brake Fluid
Ships in 3-5 business days
$64.95

Pads

KLR650 '87 - '07

Sintered Pads from EBC are the best pads we have found for the KLR, they provide good performance in all conditions yet still give you long pad life.

These sets include front and rear brake pads.

Choose Year
Ships same business day
$73.95
990 Adventure '07 - '13 950 Adventure '03 - '06

Semi-sintered construction contains 30% copper by weight within and organic matrix

This design combines the long life of a sintered pad with less rotor wear common with sintered pads

Includes pads for both front rotors.

Ships in 3-5 business days
$115.95
T7 Ténéré 700 '20 - '24 Himalayan 411 '18 - '26 Tuareg 660 '22 - '26

Replace those worn out brake pads with quality EBC replacements.

  • The perfect brake pads for leisure use
  • Offer maximum durability and excellent braking performance
  • Constructed of U.S.-made sintered bronze for longest lifetime
  • Best for riding in water, mud, dust, or sand
Ships in 3-5 business days
$39.95

Engine

Spark Plug

DRZ400 '00 - '03 DRZ400S '00 - '24 DRZ400SM '05 - '24 DRZ400E '00 - '07

Keep your motor running right with fresh spark plugs!

NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.

  • High-quality materials and superior construction for serious power and reliability
    • Pure alumina silicate ceramic insulator provides high strength and better heat transfer
    • Deep-seated copper core for a wider heat range
    • Nickel alloy tip for longer life
    • Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
  • Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
  • NGK plugs available for almost every application and riding style
Add Anti-Seize
Ships in 3-5 business days
$8.95

Gasket

XT250 '08 - '12

Genuine Yamaha replacement gaskets for your side covers.

Choose Gasket / Year
Please contact us for availability information
$13.95

Lighting

Turn Signal

Exhaust, Luggage

Heat Shield, Accessories

Universal fit. May require additional adjustment or modification.

Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.

Ships same business day
$29.95

Body

Front Fender

DR650 '96 - '26 DR350 '90 - '99 DRZ400S '00 - '24 DRZ400SM '05 - '24 DRZ400E '00 - '07 DRZ400 '00 - '03 DR350S '90 - '93 DR350SE '94 - '99

Front fender from ProCycle Plastics (formerly DSA) is shaped very much like the OEM DRZ400SM front fender. Big enough to be functional without wind-steering the bike like the stock fender does. Vacuum molded, these are a design improvement over stock. These are fully compatible in any combination with the original factory plastic.

Ships same business day
$135.95

Complete Kit

DR650 '96 - '26

Formerly DSA, now ProCycle brand, is a plastics kit in three colors - Black, White, and Blue, as well as Blue fenders with White side panels and Black fenders with White side panels. (headlight cowl not included).

Vacuum molded, these parts are a design improvement over the stock pieces. The side panels have a crisper, more angular look than the stock parts while the front fender is shaped like the DRZ400SM OEM front fender. Big enough to be functional without wind-steering the bike like the stock fender does.

Kits include front and rear fenders, a new LED tail/brake light and license plate holder, and both side panels.

Add a fresh new side panel hardware kit and an adhesive heat shield for a fresh off the showroom floor look.

Add a Maier Mfg. headlight cowl if you are doing a complete color change to your DR (must select plastic kit with head light cowl option)

Add Hardware
Add Heat Shield
Ships same business day
$389.95

Windscreen

The touring windshield from Parabellum has been designed, developed and tested using all the knowledge and experience of the KLR riders in their own shop. Using the stock mounting points as well as the cowling mounts increases the rigidity of the shield. 

All new fasteners are included. This new design allows you to move your handlebar to different positions and will not interfere with a stand-up position for off-road use.

This shield is constructed of 3/16" military grade cast acrylic that is 17 inches wide at the bottom tapering to 16 inches at the top.

Ships same business day
$128.95

Tires, Tools

Tire Tools, Wheel & Tire

Universal fit. May require additional adjustment or modification.

In the shop or on a trip, these are the Tire Irons to have.

Sold Each

  • Constructed of strong, heat-treated vanadium steel
  • Spoon design decreases the chance of tube pinch
  • 10" long tire iron with coated rubber handle
Ships same business day
$16.95
Universal fit. May require additional adjustment or modification.

No more fighting to keep the bead down while installing or repairing your off-road tires. The Bead Buddy holds the tire bead down in the drop center of the rim during tire changes making changes as easy as possible. Machined from tough 6000 series aluminum the Bead Buddy is light weight and compact enough for any tool pack. The Delrin securing thumb screw insures no scratches to your rims.

The Bead Buddy is NOT recommended for use with Bib Mousse tubes.

Ships same business day
$12.95
Universal fit. May require additional adjustment or modification.

Motion Pro T-6 Combo Lever has a hex box wrench for your axle nut on one side and a perfectly contoured tire spoon on the other. Manaufactured from lightweight forged T-6 aluminum with a hard anodized finish. These beauties are just under 10 inches long and weigh only 3.5 oz. Available in a 12/13 combo unit and a 22, 24, 27 and 32mm hex ends.

Ships same business day
$39.95

Tire Tools, Wheel & Tire, Tubes

Universal fit. May require additional adjustment or modification.

The aluminum part can be used as a valve core remover / wrench.
- Made of A6061 aluminum.
- Available in 6 beautiful anodized colors.
- Comes in pairs.

Choose Color
Ships in 3-5 business days
$7.95

Chemicals, Exhaust, $25 and Under

Bearing & Seal Grease

Universal fit. May require additional adjustment or modification.

A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.

Choose Size
Ships same business day
$13.95

Electrical, $25 and Under

Battery Chargers

Universal fit. May require additional adjustment or modification.

The Optimate Cable O-20 is a SAE weatherproof bulkhead/panel mount power source. Main body fits a 1" dia. hole. Overall length of the unit is 12" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors. We also offer an optional stainless steel bracket that you can bolt on wherever you like. This makes a clean installation and you won't have a charging cable hanging loose.

Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead for when you don't have something plugged in. Unit has a 3-year limited warranty.

Don't have an SAE plug attached to your battery? Choose the add on below.

Add Charge Ring Connector
Add Mounting Bracket
Ships same business day
$19.95

Controls

Levers

KLR650 '87 - '18

Replacement shift lever with folding tip.

Choose Length / Color
Ships same business day
$46.95
XR650L '93 - '26

A set of replacement brake and clutch levers. Standard length.

Ships same business day
$19.95
DR350 '90 - '99 DR200 '96 - '26 DR350S '90 - '93 DR350SE '94 - '99

Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.

Choose Lever
Ships same business day
$11.95
WR250R '08 - '20 WR250X '08 - '11
  • Forged lever arm shift lever available from ZETA.
  • Shift arm is made of A2014 forged aluminum for durability.
  • Forged arm is black anodized finish.
  • Foldable shift tip is made of CNC aluminum with knurled finish for better shift grip.
  • Shift tip is color anodized with ZETA laser print logo.
Ships in 3-5 business days
$28.95

Cable

DR650 '96 - '26

Genuine OEM replacement choke cable.

Add Cable Lubricant
Ships in 3-5 business days
$43.95

Spare replacement throttle cables for your TM40 carburetor conversion. Fits the stock throttle housing.

These are premium low-friction cables. 

Add Cable Lubricant
Ships in 1-2 weeks
$73.95

Mirrors

Ruckus (NPS50) '03 - '16

Matte black 118mm x 85mm mirrors. Similar to stock size.

• 8mm thread

Sold In Pairs

Please contact us for availability information
$29.95
Universal fit. May require additional adjustment or modification.

Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.

  • Aluminum extension with Japanese 10mm x 1.25 male and female threads
  • Works with standard Ball Stud Base to offer clearance in some applications
  • Torque spec: 5 Nm
  • Sold in pairs
Choose Length
Ships same business day
$12.95

Luggage

Fender Bags

Universal fit. May require additional adjustment or modification.

The glove box for your motorcycle! The Zigzag handlebar bag is their smallest bag yet also one of their most popular. Sometimes you only need the basics like your wallet, phone, registration, and other small items, and no matter what you’re riding, the Zigzag handlebar bag delivers quick and easy access to the basics.

  • VOLUME: 1.5 liters (92 cubic inches)
  • DIMENSIONS: 10.5” L x 2.5” W x 4” H (27 cm L x 6 cm W x 10 cm H).
  • MATERIALS: Rugged Bomb Shell™ vinyl coated fabric, and Mil-spec materials and hardware.
Ships same business day
$48.95

Accessories

Universal fit. May require additional adjustment or modification.

Giant Loop is aiming for smaller, lighter security in the form of its new compact Quick Loop Cables, available in 36- and 84-inch lengths. These cables roll up into a compact coil with an included hook-and-loop strap for easy storage. Both of these cables weigh under 6 ounces. A bright orange vinyl cable sheath not only protects the bike's finish from scratches, but it also provides high-visibility that, according to Giant Loop, is for "discouraging the opportunistic grab-and-dash thief to move on to an easier target."

The 84-inch cable integrates with Giant Loop's Great Basin Saddlebag and Siskiyou Panniers and other large bags which feature cable pass-throughs so riders can secure their luggage to a parked motorcycle. The 36-inch cable is more suited to locking a helmet or riding jacket to motorcycles. These cables do not include a lock.

Choose Length
Ships in 3-5 business days
$49.95

Drivetrain

Sprocket

Now you can have minimum output shaft wear, minimum chain drive wear with the FRITZCO DRIVELINE sprocket. The design of their sprockets provide correct chain alignment, allows for full spline contact with the XR650L's output shaft, fit the counter shaft either way, and straight up no hassle installation with the OEM two bolt retainer and fasteners (except 13 tooth that comes with it's own quick change retainer). Their sprockets are machined from alloy steel that is comparable in every way to OEM Honda and the best offered by other manufactures. The sprockets are then given a heat treatment that provides a compatible sprocket for the Honda output shaft and longest wear life possible.

A way to double the sprockets life would be to have a sprocket that fits on the shaft either way so both sides of the teeth can be used. Bear in mind you can't wear one side of the teeth all the way through, then flip the sprocket, and expect double life. You must reverse when a normal wear pattern develops.

16 tooth sprocket is the biggest front sprocket that will run with the standard 110 link chain and 45 tooth rear sprocket on an XR650L
The OEM cover will require modifying to use the 16 tooth sprocket on your XR650L.

Choose Sprocket Size
Ships same business day
$38.95
CRF300L '21 - '26 CRF300L Rally '21 - '26

These quality JT sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

Choose Size
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after July 2025
$49.95
KLX250S '06 - '17 KLX300R '21 - '26

Quality JT sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

Add Anti-Seize
Ships in 3-5 business days
$21.95

Chain Guide

KLR650 '87 - '07

The chain slider protects the swingarm from contact with the chain. Replace yours before it wears through to the swingarm.

Select Year
Ships same business day
$51.95

Chain

DR650 '90 - '26 Himalayan 411 '18 - '26

High Quality chain. Will need to be cut to fit your sprocket combination.

Lower friction and longer life. X-rings have twice the sealing ability as compared to o-rings. They do a better job of keeping the lube in the links and the dirt out. DID VX chains have a reputation for being the best chain you can buy for dual sport riding. DID VX chains come with rivet type master links.

Choose Type / Length
Ships same business day
$160.95

Seats

Complete Seat

KLX250S '09 - '21 KLX250SF '09 - '21 KLX300 '21 - '26 KLX300SM '21 - '26

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Width:9" (229mm)
Height:Same as OEM
Custom-made to Order: Please allow 3-4 weeks for delivery.
$329.95

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a plusher ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

Complete seats are built by Seat Concepts on a new seat pan and come ready to be installed on your bike.

Width:10" (254mm)
Height:Same as OEM
Ships same business day
$379.95

Brakes, $25 and Under

Rotor Bolts

DR650 '96 - '26

A fresh set of brake rotor bolts. These bolts already have thread lock compound applied to the threads.

Stock OEM works with factory rotors, comes in a pack of 6.

For aftermarket rotors like Warp 9 or EBC front and rear sets are available.

Front comes in pack of 6
Rear comes in pack of 4.

Choose Rotor
Ships same business day
$25.95

Tools

General

Universal fit. May require additional adjustment or modification.
  • 25ft of .032 stainless wire
  • T302/304 Stainless steel
  • Great for securing nuts, bolts and grips
  • A must have in the shop or tool box
Ships in 3-5 business days
$12.95

Drivetrain, Tools

Chain, Drivetrain

Universal fit. May require additional adjustment or modification.

Can break or rivet chains from #35 to #530 like a pro.

kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.

kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.

NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.

Ships in 3-5 business days
$74.95

Wheels, Tires

Tire Accessories

Universal fit. May require additional adjustment or modification.

Warp 9’s Pro Rim Locks are developed with Ice Track, Dirt Track and Flat Track Racers in mind!

Burnt Titanium Main Bolt

Lightweight Forged Aluminum Body

Black 7075 T6 Tower Nut and Base Washer

Base washer is machined to match each specific rim curvature for a perfect fit

About half the weight of OEM rim locks!

1.60 front  – 1.8 oz

1.85 front – 2.0 oz

2.15 rear – 2.3 oz

2.50 rear – 2.7 0z

3.00 rear – 3.10 oz

Ships same business day
$23.95

Armor - Bike Protection

Handguard

Universal fit. May require additional adjustment or modification.

The Rally Pro X-Strong features a high-impact, composite injection-molded outer guard surrounding an anodized aluminum inner guard. It is equipped with an indexed steel bar-end insert that ensures a secure installation, preventing Rally Pro handguards from slipping, even in challenging conditions. Additionally, a compact integral spoiler is incorporated into the design. The package includes a robust universal silver mount kit that is compatible with 7/8” (22mm), Pro Taper 1 1/8” (28mm), Magura, and Twin Wall aluminum handlebars.

Some models with adjustable windscreens may need the windscreen rotated forward, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.

 

Ships same business day
$104.95

Luggage, Liquidation Deals

Luggage Racks, Clearance

WR250R '08 - '26 WR250X '08 - '11

Using the included steel bracket to create 2 forward mounting points, this WR250R rack design is stronger and more well balanced than the typical "plate on the rear fender" design offered by other companies.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series WR250R/X rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

  • Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
  • Holes are in place to accept Rotopax mount with no drilling required.
  • Stainless steel mounting hardware and instructions included.
  • Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
  • Weighs 3 lbs, 10 inches wide, 12 inches long.
  • Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
  • Rear rack only, no Rotopax mount or side racks included.
Ships in 1-2 weeks
$109.95