Search Products

Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. Designed by Rick at Cogent Dynamics on his high-tech suspension dyno, then tested and endorsed by KLR owners all over, these units have been given the seal of approval by the ProCycle staff for both performance and ease of installation. No disassembly of your forks, no drilling of damper rods. Just change the oil over to 5w and install the units under the springs and hit the trails.

If you weigh up to 250 pounds, select the .64 spring kit. If you are over 250 or carry lots of luggage, please select the .70 spring kit. Please call if you have any further questions.

All of these kits include DDCs, springs, fork oil and preload spacers.

Developed by the KLR suspenison experts at Cogent, this set of springs will stiffen up that wimpy KLR front end. Choose between .64 kg/mm springs (60% stiffer than stock) or .70 kg/mm units (75% stiffer than stock).

Lightweight, for reduced unsprung mass. Straight rate springs will give better control in the rough stuff. Sold in pairs.

• Rider and Gear up to 145 lb. = 0.47 springs → 24% stiffer than stock
• Rider and Gear 145-185 lb. = 0.52 springs → 39% stiffer than stock
• Rider and Gear 185-235 lb. = 0.58 springs → 56% stiffer than stock
• Rider and Gear 235-285 lb. = 0.63 springs → 66% stiffer than stock
• Rider and Gear 290 lb.-UP = 0.70 springs → 84% stiffer than stock

The complete fork upgrade kit - your choice of springs and Race Tech Gold Valves. Also includes a set of top quality fork seals and 5W fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.

You can select from various straight rate springs to customize the package to your needs.

Stock Spring Rate for XR650L: 0.44 kg/mm

This complete fork upgrade kit includes stiffer fork springs and Race Tech cartridge emulators, as well as a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.

You can select from various straight rate springs to customize the package to your needs.

• Rider and Gear up to 160lb. = 0.47 springs → 24% stiffer than stock
• Rider and Gear 160-225 lb. = 0.52 springs → 39% stiffer than stock
• Rider and Gear 255-275 lb. = 0.58 springs → 56% stiffer than stock
• Rider and Gear 275-325 lb. = 0.63 springs → 66% stiffer than stock
• Rider and Gear 325 lb.-UP = 0.70 springs → 84% stiffer than stock

Complete kit to replace the bearings and seals in the XT225 swingarm pivot.

Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life.

Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material

Triple-lip seal design

Dyno-tested to last 3 to 4 times longer than OEM seals

Directional ribs allow seal to be installed easily

Kits include fork seals and dust wipers

Heavy duty shock bumper. The stock bumper is prone to disintegrating with age. If you are re-valving your shock it's a good idea to be sure the bumper is in good shape.

Cogent Dynamics Mojave product is a drop-in replacement for the DR650 stock shock, no modifications necessary. Mojave is not simply an improved Suzuki shock, it is a brand new replacement shock that is a totally engineered suspension solution to suit your needs.

Each shock is assembled and tested on the Cogent Dynamics suspension dyno before being packed up and shipped. Like its bigger brother the Mojave Pro Series, this will make an incredible difference in the handling of your DR.

Mojave Improvements over stock
Mojave upper mount: uses a precision spherical bearing with dust seals, which accurately transfers damping forces to the motorcycle frame.

Internal improvements: Cogent designed shaft, seal head, damper piston, adjuster and clevis.
Mono tube construction: precision honed, super-stiff steel body with an upper body cap machined from billet aluminum.
Built-in billet aluminum separator piston provides an in-line gas pressure reservoir which eliminates the Suzuki rubber bladder.

This shock package includes the CNC machined Bling Ring Preload Adjuster Collar and Preload Bearing that will make preload adjustments easy.

Select the spring you want installed based on the load you plan to carry. For riders (and gear) less than 250 pounds we recommend the 7.6 kg/mm spring. If you regularly have more than 250 pounds the bike, you might want to use the 8.15 kg/mm spring. If you have any questions at all about this, please call.

You may choose to add the Hydraulic Preload Adjuster to make it the easiest of all. All you do is twist the knob. Includes mounting bracket for knob unit. (Some CA carb compliant models may need slight modification for mounting the preload adjuster.)

Low shock also available. This option will lower your seat height 1" without the need for lowering links. All other features of this shock are the same as the stock height.

For a top notch rebuild or re-valve of your rear shock use this high quality replacement seal head.

• Complete assembly, ready to install into the shock body
• Has air bleed holes to help remove air from the oil reservoir during installation
• Double-lip oil seal design keeps out dirt and keeps friction low
• Kits include aluminum body, dust seal, bushing, oil seal, O-ring, internal guide bushing/washer, snap ring, and top-out bumper

Warp 9’s Pro Rim Locks are developed with Ice Track, Dirt Track and Flat Track Racers in mind!

Burnt Titanium Main Bolt

Lightweight Forged Aluminum Body

Black 7075 T6 Tower Nut and Base Washer

Base washer is machined to match each specific rim curvature for a perfect fit

About half the weight of OEM rim locks!

1.60 front  – 1.8 oz

1.85 front – 2.0 oz

2.15 rear – 2.3 oz

2.50 rear – 2.7 0z

3.00 rear – 3.10 oz

Replacement shift lever with folding tip for use with OEM footpegs.

OE style clutch lever.

• Quality Aircraft grade A-360 aluminum for strength & durability
• Designed to exceed OEM specifications, built to resist breakage
• Durable hard coating
• Designed to fit OEM perch

Genuine Suzuki replacement brake and clutch levers. Standard length. 

Available as a set or individual.

Please notice that this set is for '10-current DR650.

A quality set of replacement throttle cables from Motion Pro

A high quality replacement clutch cable.

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.

Complete set of engine gaskets with oil seals.

Changing your countershaft sprocket? Here is the gasket you need for the left hand side case cover of your TW200. This is the same side of the engine as your gear shift lever and chain.

Kit includes all seals in the TW200 engine (including crank shaft seals) except valve stem seals. These are high-quality seals made in the USA.

As the leader in innovation, design and development of aftermarket high-performance camshafts, Hot Cams is certain to provide the added boost that enthusiasts are looking for.

Designed, dyno proven and made in the USA, Hot Cams performance camshafts are one of the most economical, reliable and easy to install ways to add a 5-10% power gain to your bike.

Stage 1: These cams provide better low RPM torque, pulling power, and throttle response.

Stage 2: These cams will provide improved full throttle torque and horsepower starting at 4000 RPM and up.

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

• The ultimate in the evolution of spark plug technology and performance from an industry leader
• The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
• Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
• Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

Heavy-Duty clutch springs

• 15% stiffer than original
• Minimize clutch slip
• Reduce plate wear
• Improve power to ground

New starters that are manufactured to meet or exceed OEM specifications. Pull out your old starter, put in this new one and go riding. These units are built to provide a longer life than the OEM unit with these features:

• The armature is insulated for rust and corrosion protection
• Rubber seals on the top and bottom of the unit ensure a dry operation
• 90/10 copper bushings
• Extended shaft replaces long or short shaft OEM starters

Many riders choose to convert over from the stock 525 to a 520 chain. Besides being lighter and less expensive, a 520 chain is more readily available as well as having more sprocket size options.

• Steel Sprockets
• EK SRO6 O-Ring Chain (clip type master link)
• Smaller 3 hole retainer

This is a complete drivetrain package. All the parts you need to freshen up the most important part of your motorcycle.

• Polyurethane Drive Cushions
• Ball Bearing Chain Roller
• Sprocket Bolts and Nuts
• Lock Style Rear Axle Nut
• EK SR06 520 O-Ring Chain
• New front and rear 520 sprockets

This an OEM replacement nut for your front sprocket.

High Quality chain. Will need to be cut to fit your sprocket combination.

High quality steel sprockets.

Stock Gearing: 15/48-128x128

Color may vary based on manufacturer availability, quality will not be compromised.

These quality JT sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

High quality steel front sprockets from 12T to 14.

Color may vary based on manufacturer availability, quality will not be compromised.

JT steel rear sprockets are manufactured using only the finest grade of C49 high carbon steel.

Two styles of rear sprocket were used on the DR350. The 90-95 'S' and 'SE' (street legal) models have a cush drive hub. The 96-99 'S' and 'SE' as well as all of the 'dirt only' models have a non-cush rear hub. Select your sprocket accordingly. If you are not sure, look at your bike. If the sprocket is bolted directly to the wheel hub you have a non-cush model. If your sprocket is bolted to a separate sprocket carrier you have a cush drive model.

• Use a rear sprocket with a higher number of teeth for quicker acceleration and technical offroad trails.
• Use a rear sprocket with a lower number of teeth for lower engine rpm's at highway speeds.
• Stock size is 50 teeth.

We recommend using the Rear Sprocket Bolt Kit when installing most aftermarket sprockets on your TW.

High quality steel rear sprockets from 39 to 53 teeth.

Sprocket color may differ depending on size.

These quality JT sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

Complete chain and sprocket replacement packages.

• JT steel sprockets
• EK SR06 O-ring chain

Wind noise alone on a motorcycle can produce noise levels up to 95db. Permanent hearing damage can occur from 85db, so it is essential to always use hearing protection.

NoNoise Hearing Protectors are superior to traditional foam, wax or silicone earplugs. Precision-tuned, patented ceramic filters ensure maximum protection from dangerous levels of engine, wind and road noise. Unique filtration allows conversation, sirens and horns to remain clearly audible, with no muffled effect. Comfortable and suitable for all ages, they are ideal for bikers and other motor sport enthusiasts. Included is an aluminum tube with a sealed threaded cap for storage. A key ring on the cap allows for attachment of the tube to you jacket, gloves or tank back for easy access.

These units are made from Silicone-free, hypoallergenic thermoplastic for the ultimate in comfort. Another benefit is that this material can be washed and re-used.

Rear Fender comes with built in tabs designed to be used with Maier USA Side Panels.

• All Maier bodywork is made of tough, vacuum-formed high-gloss polypropylene
• Drilling is required
• Colors are OE color matched

New Body Plastics available in Black, White, Carbon Fiber, Dark Blue, or Yellow.

Also, Currently Exclusive to ProCycle: Olive Green, and Desert Sand (complete kit only)

Includes Rear Fender, Side Panels, Headlight Cover, and Front Fender.

Choose a Kit with Maier Front Fender [pic1] or after market SuperMoto Fender (black or white only) [pic2].

• SuperMoto fender kit includes our High Mount Fender Bracket!

Universal off-road front fender. Must be drilled to fit your mounting bolt pattern.

Transform your ride. Now there is wind protection for on and off-road use with no compromises! MadStad's new rotating dual-sport windshield brackets put the windshield where you need it for street riding, but tuck it down out of the way for off-road. Adjust the height and angle for much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide, and it's not in your face when you want to hit the trails.

Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

What's included in the kit:

• A set of MadStad dual-sport adjustable brackets
• 3/16" (4.5 mm) thick cast acrylic windshield

The MadStad brackets bolt to your fork clamps putting the windshield just in front of your instrument cluster for street riding, with adjustability for height and angle. The rotation feature allows you to shift the shield forward and down through 7 different settings bringing it down in front of the head light and out of your way. Their custom knobs lock the brackets in their multiple positions so the shield stays where you want it to, even bouncing around off-road.

Puig Visor Clip-On

• Suitable for screens with thickness between 3-5mm
• Multi-adjustable visor adaptable to Puig and OEM windscreens
• Visor is mounted by clip-ons and does not need to be drilled to the windscreen
• Visor sizes available include 90x230mm, 100x277mm and 102x325mm

This product has been designed to fit the Yamaha T7 Ténéré

This kit will give you 80mm of adjustment over the stock screen.

In the raised position, the difference in ride comfort is remarkable. Wind noise reduction is very noticeable and airflow underneath your screen reduced the vacuum effect, creating smoother airflow and reducing turbulence.

In the lowered position, the screen sits at the same height as stock.

To adjust the screen, loosen the thumb nuts, slide into position and re-tighten the thumb nuts, no tools required.

Factory Replacement Body Plastics from Kawasaki

CycleRacks are made out of steel tubing, bent in a press, and welded together in a jig. All of their racks have the same platform, 18" wide by 12" deep. Includes lower mount hardware.

All of their products are 100% made in the USA. If the rack is ever broken for any reason, CycleRacks will replace it for free, you just pay the shipping.

This Trekker Top Case is manufactured from glass fiber reinforce polymers ensures high structural rigidity. An anodized aluminum cover is then placed over that to resist weathering. 52 liters in size, there is enough room for 2 helmets. Attaches to your favorite rack with a Monokey fixing system. Available in Aluminum or Matte Black.

• Dimensions: 23.6"L x 18.1"W x 12.4"H
• Volume: 52 Liter
• Max Load: 22 lbs.
• Helmet Capacity: 2
• Weight: 11.44 lbs.
• Color: Brushed Aluminum / Matte Black
• Material: Polypropylene / Aluminum

Lose that ugly stock taillight and license plate bracket and install this tidy one from ProCycle. We designed this unit and have it manufactured here in Oregon. Kit includes a LED taillight / brake light unit as well as compact turn signals. We also include splice connectors and split tubing, everything you need for this installation.

There is also an option to include matching front turn signals with side mount brackets that allow you to replace the clunky front signals with the same style as the rear in this kit.

These signals have short rubberized flexible stems and bright mini halogen bulbs.

• Ministalk Marker Light V-Shape - Black/Amber
• Size:  2-5/8"
• Single-filament bulbs
• Sold in pairs

This DOT kit includes LED headlight assembly with plug-and-play wiring harness, a specially designed adjustable steel mounting bracket, and all the required installation hardware.

No cutting, no drilling, no wiring modifications! Installation takes 5 minutes.

This kit is highly recommend over the non-DOT kit. The low beam has extra punch and a proper beam pattern cut-off. The high beam throws light far and wide. It’s already a crowd favorite!

Two colors to choose from, Chrome or Black. Light output and beam pattern are the same for either color.

• Low Beam: 20W, 2,800 Lumens
• High Beam: 35W, 3,600 Lumens
• Color Temperature: 6,000k
• DOT & SAE Compliant
• CE, RoHS, ISO9002, IP67

This kit includes a DOT LED headlight assembly with plug-and-play wiring harness, a specially designed adjustable steel mounting bracket, and all the required installation hardware.

How does this headlight compare to our original TW200 kit? First and foremost, this kit has SAE/DOT markings and a much wider/brighter high beam pattern. The low beam is very similar to our original kit: wide, flat, and bright but with more punch. The DOT headlight assembly has also proven to be more durable than the original headlight.

Low Beam: 30W, 2,800 Lumens
High Beam: 50W, 3,600 Lumens
Color Temperature: 6,000k
DOT & SAE Approved
CE, RoHS, ISO9002, IP67

No cutting, drilling, or wiring modifications! Installation takes 5 minutes.

Two colors to choose from, Chrome or Black. Light output and beam pattern is the same for either color.

  Please note that this product is not compatible with the 1987 TW200.

This kit is not just a bulb, but an entirely new LED specific headlight! A specially designed adjustable steel mounting bracket replaces the stock unit. Included is a wiring harness and all the required hardware to make this installation quick and easy and entirely plug and play. No cutting, no drilling, no wiring modifications are necessary. The headlight features separate low and high beam projectors in a custom headlight shell designed specifically for this LED bulb.

This kit is available with either a chrome or black chrome reflector in the headlight.

Does not fit '87 TW200 because that year has a unique AC powered headlight circuit.

This new and improved DOT kit includes LED headlight assembly with plug-and-play wiring harness, a specially designed adjustable steel mounting bracket, and all the required installation hardware. No cutting, no drilling, no wiring modifications! Installation takes 5 minutes.

We highly recommend this kit over the non-DOT and original DOT kit.  The low beam has extra punch and a proper beam pattern cut-off.  The high beam throws light far and wide.  It’s already a crowd favorite!

Two colors to choose from, Chrome or Black. Light output and beam pattern are the same for either color.

Low Beam: 20W, 2,800 Lumens
High Beam: 35W, 3,600 Lumens
Color Temperature: 6,000k
DOT & SAE Compliant
CE, RoHS, ISO9002, IP67

Please note: Fits '87-'07 (Gen 1) only

More range at a great price.

The 3.6 gallon tank is for the off-road DRZ400 and DRZ400E.

The 3.9 gallon tank for the dual-sport DRZ400S. The 3.9 gal tank also fits the ES and SM models.

Both tanks are available in a selection of colors.

NOTE: Clarke tanks do not come with a vent hose or vent cap.

IMS Products 'Adventure Tank' for the Yamaha WR250R/X. They call this an Adventure tank because it maximizes your capacity preparing you for those extended trips without the need to stop and fill up. This tank has a 2.75 gallon advantage over the stock fuel tank and it handles it well.

IMS made this tank to replace the stock radiator shrouds and keep the fuel down low for a lower center of gravity, improving the handling and stability of the bike. They also have installed a lift pump to allow the stock fuel pump to stay in the standard position while efficiently utilizing the entire capacity of the tank. It is available in Natural, Black, Blue, Red and White.
*Graphics For This Tank Are No Longer Available*

Wing Tank - Does Not Use OEM/Stock Shrouds

• Increased tank 14L / 3.6 Gallons.
• Impact and abrasion-resistant.
• Ideal for both competition and long and short-distance tourism.
• Designed to maintain a narrow profile to ensure excellent driveability.
• Possibility of fitting cap with Acerbis key.

Included with the Tank:

• Acerbis cap
• Assembly kit

Does your stock vacuum petcock leak? Won't shut off? We have the solution with this rebuild kit. Includes a new vacuum diaphragm, O-ring, gasket and inner seal.

A popular upgrade from the stock vacuum operated fuel valve. Manually operated. Must be shut off any time the bike is parked for more than a few hours. Fits stock tank or aftermarket tank and has both main and reserve. Fully rebuildable.

Does your stock vacuum operated petcock not shut off when your bike is parked? Replace your stock vacuum operated petcock with this manual one. Must be shut off any time the bike is parked for more than a few hours. Fits stock or aftermarket tanks. Plastic tanks may need the hole 'ovalized' to fit the dual standpipes.

  Does not fit OEM XR650L metal tank

• Made from strong and lightweight 4mm thick aircraft aluminum
• Protects vital engine parts from rocks and debris
• Custom fit to your specific bike model
• Oil drain hole for easy access
• All mounting hardware include

T700 TENERE Bash plate was designed to withstand the harshest Aussie conditions. Bash plate is made from 5mm structural thick alloy plate and designed for maximum protection with minimum bulk.

Easy to mount and remove. Also includes a replaceable polyethylene linkage guard.

• Fully tig welded
• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• 4 Flush fitting mounts, 2 M8 and 2 M6
• Weighs 3.8kg
• Fits with Genuine Centerstand

Fits EURO 4 only

Here is the O-Ring that fits in the carburetor manifold. This is the manifold that holds the carb up to the cylinder head. The O-Ring mounts between this manifold and the cylinder head. When this O-Ring fails it allows air into your cylinder and makes your Air Fuel ratio too lean which causes the engine to run too hot.

A complete kit to rebuild and refresh your stock carburetor. Kit contains Genuine Mikuni replacement parts.

**Due to varying model requirements, this kit does not include main or pilot jets.

Is the cylinder head intake boot on your DR650 cracked or weathered, is it missing parts of the lip to seal around the carburetor, have you recently pulled the intake boot off only to realize the O-ring behind it is hard & brittle? This kit is your solution to solving some of those mystery problems and make your bike like new again. There can be a great deal of heat that can radiate behind the cylinder head on a DR650 as it is an air cooled engine. With that comes long term maintenance items that will need to be replaced due to them being made of materials that cannot withstand those constant heat cycles indefinitely.

Our kit includes O.E. parts from Suzuki to include:

1. Intake Boot
2. Metal Clamp
3. Premium Japanese O-ring

A quality foam Air Filter to replace the stock one. Uses the same guide and frame as the stock unit. It requires foam filter oil to properly trap dirt particles. Don't forget the Evolution Air Filter Oil kit from No Toil.

• Designed to fit in the factory air box exactly like original filter
• The best selling replacement air filter for competition motorcycles and ATVs
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

Geared for the do-it-yourselfer that already has a TM40 or HS40. This kit supplies everything you need to convert it for use on your bike.

Kit includes intake and air boot adapters, throttle cables, choke knob, accelerator pump nozzle, a wide selection of main and pilot jets plus a TM40 tuning manual.

All the advantages of a flatslide pumper carburetor at a much friendlier price than a Keihin FCR.

Our complete genuine Mikuni TM40 pumper carburetor kit comes with alloy adapter rings bonded to the carburetor body for a firm reliable fit in the stock air boots. We also include new 3" longer than stock throttle cables, a remote mounted choke knob, complete instructions along with a wide range of main jets and pilot jets for fine tuning or to accommodate bikes with extensive modifications.

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

RotoPax are Rotational Molded - the process which produces indisputably superior products.

• Thicker walls and stronger construction
• Bright colors that are less prone to fading
• Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

This new unit from JNS will protect your cases from the damage caused by a thrown chain, and will also keep your pants, boots or foot safe from your countershaft sprocket.

The case saver portion is laser cut from 0.25" aluminum and then has the 0.19" aluminum countershaft sprocket cover welded to it and the entire unit is powder coated black.

All the mounting hardware is stainless steel with machined aluminum spacers also included.

If you have a 16t front sprocket, mounting modification may be needed to fit. Install the case saver on the bike without the top spacer and bolt. This provides a little extra wiggle room. Add the top spacer and bolt after the bottom bolts are loosely threaded.

Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.

Dual purpose tires made for 60% street, 40% off-road.

Excellent performance on dirt, gravel and bad roads.

Tube type, S rated (max speed of 112 mph)

• Tread pattern yields traction in hard terrain
• Built-in rugged tread blocks feature Staggered Step design, a step-down feature to provide rigidity in the contact patch to enhance stability and handling
• Wrap-around lugs on the tire's edge to protect the tire from sharp rocks and provides additional off-road traction
• New compounds to deliver the perfect balance between road and off-road performance with focus on delivering class leading mileage performance
• Deep grooves excel in wet weather conditions
• T-rated for speeds up to 118 mph
• Tires are tubeless, however if mounting on rims that require a tube (i.e., spokes) the appropriate tube may be fitted
• Blackwall
• Fits popular large and small displacement machines.

The Shinko 244 is a very popular tube-type upgrade for the front tire on the TW200 or the VanVan. DOT approval coupled with excellent performance both on and off-road make this tire a winner!

The 244 Series dual purpose street and trail tire is designed to be equally at home on dirt or pavement.

• Adventure Trail
• Dual purpose street and trail design
• Designed to be equally at home on dirt and pavement
• DOT approved

Available in 5.10-18 (69P load / speed rating) and 4.60-18 (69S load / speed rating).

Dunlop designed the D606 tire to be street-legal but with an emphasis on aggressive off-road riding and great durability. A full-depth tread pattern designed for rigorous off-road use yields excellent traction on everything from hard-packed fire roads to soft single-track trails. At the same time, the D606's tread compound is engineered for good highway durability and grip.

The Dunlop D606 is R rated (max speed of 106 mph)

The TKC80 has a self-cleaning tread pattern along with high levels of side stability on soft surfaces with very good road handling manners. It is also original equipment on the BMW 1200 GS Adventure and KTM 690 Enduro R. Some of the tires are designated as tubeless type. Please note that Tubes can be run in Tubeless tires, but a Tube Type Tire cannot be run Tubeless.

Limited Sizes Available

The 244 Series Dual Sport street and trail tires were designed to be equally at home on dirt or pavement. Great value.

• DOT approved, tube type
• 4-ply rating
• All sizes designed for front or rear fitment

Standard Duty tubes are made with seamless construction from natural rubber with heavy duty valves. Great replacements for stock tubes and perfect as spares to carry on your bike.

• 17" tube works with 110/90, 120/80, 120/90 (4.00 to 4.25) tires
• 18" X 3.75 tube works with 110/90, 120/80, 120/90 (3.75 to 4.25) tires
• 18" X 5.10 tube works with 110/90, 120/90, 130/80, 130/90 (4.00 to 5.10) tires
• 19" tube works with 100/90, 110/90 (3.60 to 4.10) tires
• 21" tube works with 90/90, 90/100 (2.75 to 3.00) tires

Don't forget a Rim Strip. New tubes deserve new rim strips.

• Sintered Pads are best for regular riding. Long life, and good performance in all conditions
• Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand

• Aramid fibers have high strength-to-weight, thermal stability and abrasion resistance to provide advantages over cheaper steel fiber-based products
• Provide excellent stopping power without noise and rotor galling, even on polished rotors
• Fingertip control and strong, predictable brake response

DOUBLE-H SINTERED METAL PADS
Provide maximum brake effect and last twice as long as organic pads
Feature the HH friction rating – the highest in the industry

Sintered Pads from EBC are the best pads we have found for the KLR, they provide good performance in all conditions yet still give you long pad life.

These sets include front and rear brake pads.

Warp 9 320mm Supermoto front brake rotor kit. Newly updated and stronger.

Adds serious stopping power to the DR. Included is a new rotor floating on a central mounting carrier along with a caliper relocation bracket.

Available add on options include a Galfer braided stainless steel brake line, and 12oz bottle of Bel-Ray DOT4 brake fluid.

Includes a fresh set of brake rotor bolts.

These Rider's Wrenches by Fredette are combination wrenches that have three wrenches in one! A 2-stroke size spark plug wrench - a front axle and a rear axle wrench. Yep, all three in one unit.

Available in the combinations shown that will fit virtually all current dual-sport machines.

The MotoPressor MICROPUMP™ is just that, micro.  It’s tiny, yet it will inflate a couple of rear tires and a front from flat, on a single charge. 

Recharge times run between 1-3 hours depending on the state of discharge of the battery.  

The MICROPUMP™ is equipped with an in-built tire gauge that reads pressures in PSI, BAR, KPA and Kg/cm2.  

It will pump up to 130PSI and you can SET and STORE 3 separate pressures in memory.  

It weighs just 323g and measures 78x72x35mm, easily fitting into any bag or pocket.  It’s even compact enough to fit into a tool roll.  

The pump is equipped with all the necessary accessories including a storage bag, air hose, charging cable and a Schrader adapter, ensuring you have everything to keep you rolling. 

Ultra compact, this Lithium battery powered tire inflator is ideal for inflating motorcycle and bicycle tires. 

• Pumps over 100 psi.
• Will inflate a 150/70 R18 rear tire from 0-36 psi TWICE and a 90/90 R21 front tire from 0-27 psi ONCE on a single charge.
• Set and store 3 separate pressures. 
• Pump will switch off automatically when the pre-set pressure is reached.
• Recharge from a 2 Amp USB outlet (charger not supplied).
• Charge time 1-3 hours.

Comes with:
Full set of operating instructions, NO AIR LOSS inflation hose, Schrader valve adapter, USB C charging cable, drawstring storage bag.  

Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.

Thin wall bi-hex sockets designed to access narrow spark plug holes.

• Use with 3/8" drive ratchet or wrench
• Choose the one that fits your spark plug size:  14mm, 16mm, 18mm, or 21mm.

This Official 2001-up Yamaha TW200 Trailway Factory Service Manual provides repair, maintenance and service information for 2001-up Yamaha TW200 Trailway motorcycles. Most of the information is useful for the 1987-2000 models as well.

• Copper-colored release agent and lubrication for machine elements which are subjected to high thermal stress
• Makes dismantling easy after long running times
• Outstanding thermal resistance
• Resistant to acceleration forces
• Outstandingly adherent
• Resistant to hot water, salt water and splash water
• Long-term corrosion protection
• Prevents brake noise
• Protects from welding and seizing
• Operating temperature range: -31°F to 2012°F (-35°C to 1100°C) .
• 3.53 oz (100 g) tube

Class 10.9 steel rotor bolts provide excellent sheer strength and include medium-strength threadlock patches to securely fasten your rotor.

Includes all the fasteners for both front and rear rotors.

• Revolutionary Parafilm™ formula; spray it on and let it dry
• Doesn't fling off
• Sprays on wet, dries to waxy film and seals the lubricant to your chain
• Non-gooey finish keeps dirt, sand and grit from sticking to freshly lubed chains
• Translates into longer chain life and reduced sprocket wear
• 5.5 oz net wt Aerosol

Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.

Reduce exhaust leaks with this new OEM exhaust gasket. This gasket goes between the header pipe and the cylinder head.

We recommend Anti-Seize on exhaust fasteners.

If your aftermarket exhaust is missing heat shield mounting points, this is the easy fix you’ve been waiting for. 

Includes one stainless steel mounting bracket with M6 threaded nut, and one stainless steel hose clamp.

Fits exhaust approximately 1.1inch-2inch diameter. Trimming may be required for smaller diameter exhausts.

ProTaper Pillow Top Grip with 3-D (Tri-Density) Technology.  Try the grip with the technical advantage of three dedicated rubber compounds.

• Vibrasonix pillow top reduces vibration and cushions impact. 
• Inner core compound perfects the bonding interface with bars. 
• Anti-Rip Tip™ uses denser compound to increase life of grip. 
• Designed to self-clean and shed mud away from outer surface. 
• Tacky gel-like surface compound is perfect for the trail and MX.

A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.

If you are replacing your side stand you will want to check the hardware. Over the years they can take a beating and the springs become lost or broken.

This is the full kit that includes #4, #5, #2, and #3 in the diagram.

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!

• Mega wide 60mm platform
• Widest and lightest pivoting pegs on the market
• Open design = less mud packing
• Unique multi-directional grip pattern
• Outstanding build quality
• Race proven design and durability

These low peg mounts will drop your footpegs 1.5" and move them to the rear 1" for a much more comfortable riding position, especially for taller riders. Unlike relocation plates, these mounts do not hang dangerously below the frame. You can mount stock or aftermarket pegs and they are compatible with all skid plates, crash bars, and center stands.

New 10.9 high strength mounting bolts are included. Once installed the foot controls will need adjustment and the brake switch spring will need to be slightly modified.

• Most compact of lithium motorsports batteries available
• Ultra-lightweight and high-power
• Can hold a charge up to a year provided there are no “parasitic drains” (accessories that draw power when bike is off (i.e. alarms, ECUs, GPS, heated grips, etc)
• Large all-brass terminal design
• Can be installed in any orientation
• Antigravity batteries include a 3 year pro-rated, non-transferable warranty (registration of the battery with the manufacturer is required within 30 days of purchase by the retail customer). All warranties are to go back through Antigravity.
• Small Case format
• 4.375 x 2.37 x 3.75 inches (LxWxH)
• 240 Cranking Amps
• 11 Amp Hours (Pb Eq)/ 5.5Ah (Actual)/ 70.4Wh
• 1.56 lbs

This guard is designed to protect your TW200 headlight from rocks, branches, and any road/trail debris kicked up by the vehicle in front of you.  It’s a one piece laser cut steel component with a sleek black powder coat finish.  Mounting hardware is included. 

Note: installation requires drilling two 1/4” holes in your plastic headlight fairing.

All that you need to repair and inflate your tire on the road or trail.

• Padded nylon zippered carrying case easily stores inside fanny pack or tool compartment
• Everything needed to repair and inflate tire on the road or trail
• 4" inflator hose accepts threaded cartridges only
• Each cartridge produces 8-9 psi
• Made in the USA

Kit includes:

• 1 - large oblong patch
• 2 - medium size patches
• 3 - small patches
• Thumb buffer
• 0.50 oz tube of rubber cement
• 5 - 4" rubber insert strips
• Insertion tool with screwdriver handle
• Reamer/rasp tool with screwdriver handle
• 3 - 16 gram 3/8" threaded CO² cartridges
• CO² 4" inflator hose

CO² cartridges cannot be transported on an aircraft.