Search Products

The Mini Powercore 4 is the best bang for your buck performance exhaust system out there.

Offered as a standard Mini Powercore 4, or as a Spark Arrestor Version, the Mini Powercore 4 features a Hi-Flo stainless steel core and formed end caps, an aircraft grade aluminum canister and a durable stainless steel header. It is pounds lighter than stock and you will swear the motor has been bored and stroked with the first twist of the throttle.

Made 'down unda' by B&B Off Road Engineering in Australia, these racks are CNC machined from 5mm 5083 aluminum plate with lots of slots around the edge to attach your RokStraps or other tie-down devices. The plate attaches directly to the CRF rear frame with four screws that are included.

There are four options for this plate, two sizes (Mini and Maxi) and two colors each (Polished and Black Polymer coating). The Maxi Plate is 18" wide at the seat, 13" long and 8.5" wide at back. The Mini Plate is 12 3/4" wide at the seat, 11" long and 9 1/4" wide at the back.

The Big Tour Extension optional add on below is a forward extension for the Luggage Plates shown above. CNC machined from the same 5mm 5083 aluminium plate, this covers the rear portion of your seat and turns that area into a solid platform for packing more stuff for your RTW adventure.

This beautiful polished rear carry rack from B&B Eng. is made from aluminum tubing and 4mm 5083 plate. 5083 is used because of its suitability for welding and high level of abrasion and impact resistance. Kit includes all the necessary stainless clamps and bolts. With the roundness and strength of the tubing supports, it makes a great grab handle when you need to lift the rear of the motorcycle.

The Big Tour Extension is a forward extension for the Luggage Plates.

CNC machined from the same 5mm 5083 aluminium plate, this covers the rear portion of your seat and turns that area into a solid platform for packing more stuff for your RTW adventure.

You can combine it with either the Maxi or Mini rack and then get the combo in either a Polished finish or a Black Polymer coating.

*Extension plate only, mini / maxi plate sold separate, or in complete set.

You can add this cam buckle loop to any 1" flat webbing system and have an instant secure way to tighten your load.

Available in 6 colors.

CONSTRUCTION FEATURES

• Heavy Duty Cam Buckle rated for 2000 pound load capacity
• 1" Flat Nylon webbing

Geared for the do-it-yourselfer that already has a TM40 or HS40. This kit supplies everything you need to convert it for use on your bike.

Kit includes intake and air boot adapters, throttle cables, choke knob, accelerator pump nozzle, a wide selection of main and pilot jets plus a TM40 tuning manual.

Tune your stock carburetor for better power and response, easier starting and quicker warm up. Mikuni main and pilot jets.

• Main Jets: #110 & #112.5
• Pilot Jets: #17.5 & #20

• Increased air flow over the stock air filter
• Designed to increase horsepower and throttle response
• Designed to fit inside the factory air box
• Larger surface area over foam filters which offers longer service intervals in dusty conditions
• Four layers of premium cotton gauze provides outstanding filtration
• Washable & re-usable, never wears out
• One filter will last the lifetime of your bike

Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox while acting as a breathable gasket for increased air passage

Features:

• Coarse open-pore foam catches airborn dirt, grime, and sand
• Fine open-pore inner foam acts as second filter to trap the smallest particles while ensuring maximum air passage
• Adhesive withstands repeated cleaning
• Smaller than stock to increase air space and circulation around filter
• exclusively formulated adhesive withstands repeated cleaning. even with harsh solvents or gasoline
• twin air filters are slightly smaller than stock filters to increase air space around the filter and improve circulation

High-performance, high-flow filter element and filter base for the TT-R 125.

• Replaces stock filter and base
• Filter base is made from HDPE plastic
• 3 times larger than stock filter!
• Adds almost 1/2 horsepower
• Designed to fit inside the factory air box

A quality foam Air Filter to replace the stock one. Uses the same guide and frame as the stock unit. It requires foam filter oil to properly trap dirt particles. Don't forget the Evolution Air Filter Oil kit from No Toil.

• Designed to fit in the factory air box exactly like original filter
• The best selling replacement air filter for competition motorcycles and ATVs
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

• Designed to fit in the factory air box exactly like original filter
• The best selling replacement air filter for competition motorcycles and ATVs
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

• Unique triple stage foam filter designed for the most extreme conditions
• Eliminates the need for power robbing dust covers and outerwear covers
• Increased protection against silt, water, and sand
• Allows for extended filter service intervals
• Can be cleaned, re-oiled, and re-used like a 2 stage filter
• Used by factory off road teams around the world

Replace your handlebar mounted choke with this simple knob mounted directly on the carburetor.

Available in short or long reach.

Long reach is easier to use while wearing riding gloves.

Works for either the stock BST or Mikuni TM40.

Rebuild your crusty carburetor with parts from the same manufacturer the OEM companies use. Included in the kit are all necessary gaskets, O-rings, float valve and jets you need to rebuild your carburetor to like new condition.

Here is the O-Ring that fits in the carburetor manifold. This is the manifold that holds the carb up to the cylinder head. The O-Ring mounts between this manifold and the cylinder head. When this O-Ring fails it allows air into your cylinder and makes your Air Fuel ratio too lean which causes the engine to run too hot.

Replaces the stock 2 wire Ruckus fuel level unit with a 3 wire unit that allows use of a multi-level fuel gauge.

Heavy-duty springs help prevent clutch slip in high-performance motors.

• Custom wound from chrome-silicon wire
• Preset for long life
• Higher spring seat pressure to resist clutch slip

Replacement friction plates and drive plates.

Designed to improve the life and durability of your clutch, Barnett's "Dirt Digger" provides better rideability with less slippage compared to stock.

• Carbon fiber friction plates
• Tempered steel drive plates go through a vibratory de-burring process and then are quality checked for flatness to provide optimum performance.
• Heavy duty clutch springs are pre-set, shot-peened, and heat treated for performance and durability.

Heavy duty springs help prevent clutch slip in high-performance motors.

• Custom wound from chrome-silicon wire
• Preset for long life
• Higher spring seat pressure to resist clutch slip

Replace your worn out clutch with a high quality Clutch Kit. This kit includes new friction discs for your clutch pack.

Please note: kit includes friction discs only, steel plates and springs not included.

These valve springs are required when using the BBR High Performance camshaft for the CRF150/230F.

• Built from the highest quality chrome-silicon wire
• Fully shot-peened and preset for long life

7.48mm diameter - Includes three valve shims of each size from 1.20 to 3.50mm in .05mm increments.

141 shims in total. 0.57 cents per shim! Does your local dealer have the shims you need?

High performance camshaft for the CRF150F 03'-05' and CRF230F. Higher lift and duration than stock.

• Adds 1+ HP to fully modified motor
• Makes more aggressive race-style of power
• Bike still starts easily and idles smooth

CRF230F 240cc Kit:

• 67mm piston, pin, clips, and rings
• New (not reground) high-performance camshaft
• Includes heavy-duty valve springs
• Includes head and base gaskets
• Requires boring of your stock cylinder to fit the new piston

Big bore kit for the 2003-2005 CRF150F. A simple bore in bore kit that includes BBR's high performance camshaft and valve springs for added performance. This cam features higher lift and duration than stock. Complete kit includes piston, rings, pin, clips, BBR MX cam, valve springs and gaskets. This is the quickest way to add the most power to your bike. Great when combined with our exhaust system, Rev-Box, and Free-Flow airfilter. Requires machining of stock cylinder for installation.

• Adds up to 3.5 HP
• 67mm piston, pin, clips, and rings
• 10.75:1 compression ratio
• Includes head and base gaskets
• Makes more aggressive style of power
• Bike still starts easily and idles smooth
• Same camshaft as used by the BBR Race Team
• Requires professional boring of your stock cylinder

285cc big bore kit includes:

Wiseco piston 78.00/+5.00 10.5:1 (with rings, pin & clips): 

• All Wiseco Pistons are forged from high silicon, low expansion aluminum which offers superior strength, reduced weight, improved heat transfer, and longer life.
• Diamond turned finish from one of the many CNC computer controlled turning centers guarantees you a perfect finish with no size variation. Wiseco pistons can be installed in any of today’s cylinder bore compositions
• Wiseco’s state-of-the-art computerized manufacturing facility is dedicated to supplying both the high-perfomance racer and recreational enthusiast with the finest forged piston available in today’s market place.

HotCams stage 1 camshaft:

• High-performance racing camshafts
• Stage 1 performance camshafts are drop-in cams that are designed to be used with stock valve springs
• In most applications, Stage 1 cams deliver more torque.

Complete top end gasket set:

• High-tech materials provide unmatched reliability and performance
• Rebuild the engine with total confidence as each set is designed for durability and accurate fit
• Oil seals are genuine OEM replacement seals
• Performance sets designed for a piston replacement
• Includes every gasket, O-ring and seal required to rebuild a top end; valve seals, head, base, exhaust, tensioner, and other misc. gaskets and O-rings
• Does not include formed rubber valve cover gasket
• High-compression kits use .012" thick base gaskets to raise compression
• Cost-effective way to raise compression without expensive high-compression pistons or cylinder head work
• All gaskets made in the U.S.A. 

This is a great combination and a big 'bang for the buck' performance increase. 

No re-sleeving required. You will have to have your cylinder bored to fit the larger piston.

Honda XR650L Transmission Wide Ratio Upgrade Kit by ProCycle - Complete NX650 Gear Conversion

Transform your Honda XR650L's performance with ProCycle's complete transmission upgrade kit featuring proven NX650 gear ratios. This comprehensive package includes genuine OEM Honda 2nd gear and 5th gear from the legendary NX650 transmission, delivering superior power delivery and smoother shifting across all terrain. This upgrade reduces the large gap between 1st and 2nd gear and makes 5th gear a taller overdrive for lower RPM's on the highway. 

Complete Kit Includes:

• Genuine OEM Honda 2nd gear (NX650 source)
• Genuine OEM Honda 5th gear (NX650 source)
• New gearshift reset spring for precise shifting
• New gearshift return spring for reliable engagement
• Complete gasket kit for professional installation

Key Benefits:

• Enhanced performance with time-tested NX650 gear ratios
• OEM Honda quality ensures perfect fit and durability
• Ships from USA inventory - no import taxes or customs delays
• Complete solution - everything needed for transmission upgrade

Perfect for XR650L owners seeking improved transmission performance, DIY mechanics, and professional shops. Upgrade to the superior gear configuration that made the Honda NX650 famous for its balanced power delivery and versatility.

Unless you have managed to bash yours on a rock, this is an item of pure bling, but hey, there is nothing wrong with that! This CNC Oil Filter Cover is made from A7009-T6 aluminum with the 'Zeta' logo machined into the front and anodized in blue to really stand out on your Yamaha. It's also lighter than stock.

The idler gear is one of the few plastic components in the DR650 that can significantly impact engine performance if it fails or breaks.

This gear is crucial for driving the oil pump, which ensures proper oil circulation throughout the engine. In the absence of this component, complete engine failure may occur. While the idler gear is not frequently cited as a common failure point in the DR650 engine, failures have been reported, typically manifesting as either a fractured gear or stripped teeth.

During inspection, it is essential to check for any cracks, chipped areas, or missing teeth on the idler gear. Replacing the gear is a straightforward procedure, and it is advisable to do so while the clutch side case cover is already removed for other maintenance tasks, such as NSU screw replacements or clutch hub bushing replacements.

This component is a Genuine Suzuki part.

Outer Clutch Cover O-Ring, Inner Clutch Cover Gasket, Stator Cover Gasket.

Sold individually, not as a kit

• Bolts are CNC-machined from high-quality aluminum
• Embedded magnet helps keep bolt in place
• Pre-drilled holes make for easy installation of safety wires

Rebuilding your engine? Here is a complete gasket kit for your TW200. Includes: Head Gasket, Base Gasket, Stud Gasket, Head Side Cover O-Ring, two Valve Cover O-Rings, Base O-Ring, Stud O-Ring, Rocker Shaft O-Ring, two Cam Chain Tensioner O-Rings, Intake Manifold O-Ring, two Valve Stem Seals, Exhaust Gasket, Left and Right Side Cover Gaskets, Pump Cover Gasket, TDC Plug O-Ring, Crankshaft Nut Plug O-Ring, and Oil Filler Plug O-Ring.

Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids. Fits stock shock.

• 30% stiffer than stock
• Preset and stress relieved for long life
• Custom wound from aircraft quality spring steel
• Powder coated finish

The correct spring rate for your weight will give a smoother more controlled ride. No more bottoming out, and improved traction and confidence off-road.
8.6 & 9.6 springs require an adapter which is included.

Recommended rates:

• Rider & gear up to 150 lb = Stock 6.5 spring
• Rider & gear up to 200 lb = 7.5 spring
• Rider & gear 200-275 lb = 8.3 spring
• Rider & gear 275-350 lb = 8.6 spring
• Rider & gear 350 lb & up = 9.6 spring

*Spring color may vary due to specification requirement and availability.

A stiffer shock spring will help you get through the whoops or just help handle that extra baggage on the rear.

Stock spring rate is 10.5 KG/mm

*Spring color may vary due to specification requirement and availability.

The complete shock upgrade kit - a shock spring of your choice, Race Tech Gold Valve kit, detailed instructions and a bottle of quality shock oil to complete the job. Everything you need to transform your mushy stock shock into suspension that really works.

Recommended rates:

• Rider & gear up to 150 lb = Stock 6.5 spring
• Rider & gear up to 200 lb = 7.5 spring
• Rider & gear 200-275 lb = 8.3 spring
• Rider & gear 275-350 lb = 8.6 spring
• Rider & gear 350 lb & up = 9.6 spring

Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.

OEM spring rate is 6.7kg/mm. We offer stiffer spring rates for riders who wish to carry luggage or just prefer firmer suspension.

Race Tech shock springs require adapter collars which are included with your spring. *Spring color may vary due to specification requirement and availability.

• Lighter and stiffer than stock, these high quality straight rate springs are made specifically for the DL line.
• A proper rear spring will give a smoother more controlled ride.
• Available in a multitude of spring rates, one is the perfect fit for your bike and riding style.
• Stock spring is rated at 8.2 kg/mm for the DL650, and DL1000

 Adapters are required for this spring

Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids.

• 30% stiffer than stock
• Preset and stress relieved for long life
• Custom wound from aircraft grade spring steel

Kit includes all the fork bushings, o-rings, snap rings and washers. This kit comes with what you need to completely rebuild your front fork bushings.

• Bushings are dyno-tested to 500,000 strokes with less wear than OEM bushings
• Kit includes two slider bushings and two leg bushings
• Kit includes all copper washers and O-rings
• Kit includes two fork seal snap rings

Complete kit to replace the bearings and seals in the DR350 shock linkage. Includes the lower shock bearing.

EBC rear replacement brake rotor. High friction billet steel.

Complete bolt-on and go rotor assemblies. Made with forged aluminum center hubs high-friction billet steel rotor rings and sturdy riveted construction. Excellent choice when upgrading or replacing OEM brake rotors.

Sold in pairs.

High performance EBC brake pads.

• The "HH" friction rating is the highest in the industry
• Provide maximum brake effect
• Lasts twice as long as organic pads

This is a complete kit that replaces both front and rear brake pads.

• Front pads: Sintered Pads are best for regular riding. Long life, and good performance in all conditions
• Rear shoes: Organic brake pads contain man-made high-performance fibers that are used for their light weight, high strength abrasion resistance and thermal stability.

GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

• Significantly improves response and feel over factory rubber lines
• Largest performance improvement for your money over any other braking upgrade
• Stainless steel hose resists abrasion and puncture
• Teflon core does not degrade over time like rubber lines
• PTFE Dupont 64 Teflon® hose
• Feature a heavy-duty stiffener sleeve and route just like the factory lines
• Proprietary, premium fittings
• Banjos utilizes a unique machined channel and sealing surface for leak-free installations
• R&D and engineered in the USA
• GBrakes USA controls the manufacturing process, ensuring the highest level of quality control

Made from the latest generation of computer design and control metal cutting equipment for maximum durability. Made exclusively from the finest Japanese 545C high carbon steel. 

All sprockets are heat-treated and hand-finished to meet or exceed the highest possible quality standards.

Rear Sprocket

Note: 2002 and later models have a 10mm sprocket bolts. 2000-2001 models have 8mm sprocket bolts.

High quality sprockets

• Stock size is 14 tooth
• Add teeth for highway riding
• Subtract teeth for low end gearing

Counter shaft sprocket replacement requires the removal of the left side case cover. A new gasket may be required. This is also a great time to replace that leaking oil seal!

428 x 130 links. High Quality non-ORing chain. Rust-resistant gold plated chain for high powered racing machines.

Fully encloses the chain to guide it onto the rear sprocket. Stainless steel hardware, anodized aluminum plate, and plastic buffer for low friction and noise. Saves expensive engine cases.

The chain slider protects the swingarm from contact with the chain. Replace yours before it wears through to the swingarm.

Chain slippers undergo degradation over time due to friction associated with the chain's movement. To maintain optimal operational performance, it is advised to replace worn components with authentic Honda parts.

Chain sliders undergo performance degradation over time due to the friction experienced by the chain. To maintain optimal functionality, it is recommended to replace worn components with genuine Honda parts.

High-quality DID chain and steel sprockets for 2002 & later TTR125s.

• 13T front sprocket
• 49T or 54T rear sprocket
• 130-link DID chain (must be cut to correct length)
• Note: 2002 and later models have 10mm sprocket bolts.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Rear wheel bearing kit. Includes a new dust seal and the bearing and seal for the cush drive hub. All bearings are sealed on both sides.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

The plastic fitting that secures the stock choke cable to the carburetor is delicate and easily broken. A broken fitting can cause hard to solve idling and running problems.

CNC machined from billet aluminum and anodized black or blue. If you want to retain your handlebar mounted choke this may be the solution.

  These no longer fit the new version of the ProCycle Remote Choke Cable. Will not work with the long or short reach choke knobs.

The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires.

• Stands securely when traveling with lots of luggage and during maintenance
• Bike-specific design for easy mounting and high cornering clearance
• Easy to lift up the motorcycle
• Outrigger for optimal leverage
• Best corrosion resistance due to sand blasting and powder coating of the surface
• Made of robust steel
• Total Weight: appr. 1,6 kg / appr. 3.6 lb

2 high-quality bushings per set. They recommend changing bushings every 40 hours or at least once a year to get the best performance out of a set. If you are on an Adventure Bike and are doing a lot of road miles they recommend swapping out bushings once a year to ensure that you get the most vibration dampening of the bushings.

Every new set of pegs comes with a 90A bushing installed. This is a medium flex rating. 
80A is the softest and 95A lock-out is the stiffest and has the least amount of flex.

The bushings act like the suspension on your bike. With bushings, there are a couple of things to think about. The more firm the bushing the more durable and longer it will last. They use a durometer, a hardness scale 0 being the softest and 100 being the hardest. They don't go below a80 because they found that durability isn't great below this but have tested as low as a60 bushings. A bigger person that rides enduro-style terrain might want an a96 or a98 rated bushing. A lighter person might want the opposite but in the end, it comes down to personal preference. 

The bushings are high quality yet inexpensive (they achieve this because they use skateboard bushings that are already developed and produced in massive quantities around the world) and a wear item designed to be replaced each season or depending on how hard or often someone rides.  

For use on Motion Factory Foot Pegs Only

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust. 

Kit includes two gaskets.

This is the gasket used between the header pipe and the stock muffler. This gasket is not needed for aftermarket mufflers!

The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

• Uses long-life muffler packing for increased packing life
• Forest Service approved spark arrester

Delayed stock from manufacturer, please ask for availability.

The new DG RST (Reduced Sound Technology) muffler is the quietest DG muffler and is designed especially for dual-sport machines (Just 89db @ 3200 RPM). A new baffle design dissipates sound waves reducing noise output in a very efficient manner. This new design also stretches out the time between muffler repacks. Included is a Stainless Steel mid-pipe, USFS Approved Spark Arrestor and a new Aluminum end cap.

You may want to consider a new exhaust gasket that goes between the header and the muffler.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

The Complete Seats come assembled with an aftermarket pan and ready to ride.

"Will not fit the Rally model"

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a plusher ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These great features combine to offer you a custom seat feel, and provide greater enjoyment and increased range for long commutes, or Dual-Sport rides!

The Complete Seats come assembled with an aftermarket pan and ready to ride.

The MotoPressor is a compact pump unit that weighs only 1.3 pounds and fits in the palm of your hand! Measures 4"x3"x1.5"  This makes it smaller and easier to carry with you.

It includes a 8 inch long inflation hose, with a a low air loss chuck. You also get an SAE power cord that attaches to your battery and stays there, along with alligator clips with SAE connector. The Pocket Pump has an 6.5 foot power cord. All of this packs into a heavy duty neoprene pouch.

MotoPressor will inflate a 150/70/ R18 tire from 0-31psi in under 4 minutes, and is capable of pumping up to 130psi. It also features a built-in cooling fan to keep the pump at optimum operating temperature, and a check valve to check the psi by attaching your tire gauge to this valve.

This DOT kit features a unique halo daytime running light which glows white or amber and a specially designed adjustable steel mounting bracket.  The wiring connection is plug & play.  No cutting, no drilling, no electrical modifications! Installation takes 5 minutes.

The low beam has a nice uniform pattern and a proper upper cut-off.  The high beam throws light far and wide.  

Low Beam: 20W, 2,800 Lumens
High Beam: 35W, 4,800 Lumens
Color Temperature: 6,000k
DOT & SAE Compliant
CE, RoHS, ISO9002, IP67

This is a plug & play low profile LED light bar kit which includes laser cut stainless steel mounting brackets and high quality wire taps.

IMPORTANT: Must be used in conjunction with LED headlight or bulb that consumes no more than 35W.

  Please note that this product is not compatible with the 1987 TW200.

Taillight and brake light Attaches to the top of the rear fender. Dimensions: 3 1/2" wide x 2" long x 3/4" tall. D.O.T. approved.

• Maximum protection that will not corrode, discolor, bend or crack
• Provides protection for the engine care, frame rails, ignition cover and the water pump area on most applications
• Simple mounting system makes installation, cleaning, and maintenance (oil changes) a snap
• Snug fit prevents mud/dirt/rock/debris from building up between the skid plate and the motor
• Constructed of lightweight polypropylene
• Bike will run quieter and cooler compared to alloy skid plate

Protect your Kawasaki KLX250 or KLX300 with T-Rex Racing's heavy-duty skid plate engineered for maximum durability and performance. This premium aluminum skid plate shields your bike's engine and undercarriage from rocks, roots, and trail debris during aggressive off-road adventures. 

Precision-manufactured for perfect fitment, this bolt-on protection features reinforced mounting points and lightweight construction that won't compromise your bike's agility. 

Easy installation with included hardware makes this essential upgrade perfect for trail riders, enduro enthusiasts, and dual-sport adventurers seeking reliable undercarriage protection for their Kawasaki motorcycle.

These plates are made from 4mm thick 5083 aluminum because the extreme abrasion and impact resistance for the full weight of the bike and the rider. The front portion of the B&B Skid Plate bolts to mounts that are permanently attached to the forward motor mount. This means no more trying to hold clamps in place when you take you skid plate off for oil changes or cleaning. Easy off, easy on. All necessary hardware is included in the kit. The plate has foam or rubber wherever there is contact with the frame.

Choose from a polished finish or a black polymer coating.

• Extremely strong plastic construction
• Protects the swingarm of the motorcycle from impacts with external obstacles
• Easily attaches to the swingarm with magnets and rubber bands, which allows quick removal of the protections in few seconds to wash and/or maintain
• Intuitive and immediate reassembly in a few seconds

To fit straight 22mm (7/8″) handlebar.

• Barbusters strongest handguard EVER!
• Designed for Enduro and Trail bikes.
• Two mounting points secure the full wrap around aluminum design.
• Compact curved profile to protect hands and levers during intense trail and tight bush riding.
• Heat treated aluminum backbone for maximum strength.
• Replaceable, high impact resistant EGO plastic guards included.
• Large range of colors matched to popular motorcycle brands.
• Deflectors available for increased protection (sold separate).
• Easy installation.
• NOTE: Not ideal for bikes with long clutch and brake levers.

Protect your brake rotor and fork lowers from mud and debris. Choose between black or white.

B & B Off Roads Kawasaki KLR 650 master cylinder guard is made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All guards are supplied with all necessary mountings and stainless bolts. Made to cover and protects the rear brake master cylinder it looks great and is easy to install. Choose between polished or black polymer finish.

CNC machined from 6mm aluminum plate case saver, with a 4mm aluminum front sprocket cover.

This clever carbon fiber wrap can either hide your ugly off road sticker or give you a place to attach your sticker so that you don't leave that sticky glue on your fork leg. 

Easy snap on fit for most larger displacement motorcycles. Fits on the upper section of upside down forks or on the lower section of conventional forks. 

Does not fit smaller forks like those on the TW200 or XT250. 

Heavy Duty replacement Voltage Regulator. More robust, but lower cost than the factory unit.

ProCycle Dashboard designed to power multiple electronic devices. It can also be used for accessory lights, heated grips or gear, whatever you like.

The dash panel is manufactured from laser cut 5/64 mild steel and powder coated black. Also included are 2 weather resistant green LED rocker switches, a voltmeter with (two) 2.1 amp weather resistant USB ports, a wiring harness with a built in fuse/holder, and complete instructions. Everything you need to mount it and connect the bikes electrical system.

• Copper-colored release agent and lubrication for machine elements which are subjected to high thermal stress
• Makes dismantling easy after long running times
• Outstanding thermal resistance
• Resistant to acceleration forces
• Outstandingly adherent
• Resistant to hot water, salt water and splash water
• Long-term corrosion protection
• Prevents brake noise
• Protects from welding and seizing
• Operating temperature range: -31°F to 2012°F (-35°C to 1100°C) .
• 3.53 oz (100 g) tube

You have to pull the rotor off the crank of your KLR to access the doohickey. The offset in this factory Kawasaki wrench makes that very easy. It is very difficult to get a standard wrench to hold the crank to get the flywheel/rotor off.

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

Fits all TW200's. Includes a new cap and uses the stock petcock. Capacity is 2.7 gallons (stock tank is 1.8 gallons).

  Clarke tanks do not come with a vent hose or vent cap.

Please note: All Clarke TW200 tanks have blemishes due to the mold used in their manufacturing process. Also, side panels are likely to not snap into tank as they do on the stock tank.

Security for your fuel tank. Includes 2 keys. Internally vented with a check valve that prevents spillage in case of a tip over.

This anodized billet piece, brings a touch of color to your bike. Available in red or blue, it replaces the stamped steel clevis that connects your brake pedal to the master cylinder.

The touring windshield from Parabellum has been designed, developed and tested using all the knowledge and experience of the KLR riders in their own shop. Using the stock mounting points as well as the cowling mounts increases the rigidity of the shield. 

All new fasteners are included. This new design allows you to move your handlebar to different positions and will not interfere with a stand-up position for off-road use.

This shield is constructed of 3/16" military grade cast acrylic that is 17 inches wide at the bottom tapering to 16 inches at the top.

Quality MX style rear fender from Maier.

High-quality, direct replacement plastic kit includes:

• Front and rear fender
• Side covers
• Air box cover
• Radiator shrouds

Yellow kit is only available with white side covers

  Add-on Headlight cowling fits S and SM models not "E" offroad model

This advanced filter oil & cleaner kit by No Toil is alcohol free, completely biodegradable and compatible with all foam filters.

• Offers superior protection
• Waterproof yet easy to clean

A six step maintenance system designed to recharge any K&N air filter.

• Completely restores airflow efficiency
• Kit includes filter oil, and filter cleaner
• For K&N filters only

ThreeBond 1342 low strength thread locking compound. This is the ideal retaining compound for small nuts and bolts. Fasteners are held securely but, can be easily removed when necessary. ThreeBond gives this a number 4 rating for exposure to engine oil making it a good choice for internal fasteners as well as external fasteners. 10ml bottle.

MAGURA HYMEC – AN EASY TO INSTALL ALTERNATIVE TO A MECHANICAL CLUTCH.

This system replaces the clutch lever and cable – with a small lightweight hydraulic system for improved clutch control. The Hymec ensures an easier operating pressure, a constant pressure point, no more cable adjustment and smooth clutch actuation to ensure the perfect take-off every time. Hymec significantly improves vehicle performance – it allows the user to feel the point where the clutch releases and actuates. This product has been developed over many years and been tested under the toughest conditions possible in the world of motorcycle off-road sport. It has been used by world champion riders who all agree as to the benefits but it is just as useful to the complete novice who stalls at the traffic lights.

• This system replaces the clutch lever and cable – with a small lightweight hydraulic system for improved clutch control
• Up to 20% less clutch pull
• No maintenance and self-adjusting
• Smooth hydraulic feel with clear and consistent pressure point
• Operates on mineral oil which doesn't draw moisture and won't harm paint or finish
• Forged break-away lever blade with reach adjust is ready to mount
• Clutch safety switch included

Direct replacement cables for your T-Dub. OEM or high-quality replacements will keep you on the road or trail. Pay attention to the model year for correct fitment, then select the cable type: Throttle, Clutch or Speedo, they're all here.

Comfortable Oversize (or Fat Bar) Handlebars.

• CR High Bend
• Black in color. 
• Made from 5mm, proprietary, 2000 series T6 aluminum alloy for superior tensile and yield strength.
• Lighter and stronger than regular bars
• No-crossbrace allows flex to reduce shock and rider fatigue
• Oversize 1-1/8" diameter base reduces to 7/8" to allow standard-size controls/grips
• Etched alignment marks for fast and accurate positioning
• Bar pad included
• Works with stock controls and cables.

For bikes with factory 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter (sold separate).

Motion Factory Racing patented Flex-Mount Footpeg System provides superior grip and allows your foot to flex forward and back with the movement or your motorcycle.

One of the key features of Flex-Mount Footpegs is their unique flex-mount design. This design allows the footpegs to absorb shocks and vibrations, reducing fatigue and improving overall comfort during long rides. Additionally, the adjustable height and angle options ensure a personalized fit, allowing you to find the perfect riding position for maximum control and stability.

The bushings act like the suspension on your bike. With bushings, there are a couple of things to think about. The more firm the bushing the more durable and longer it will last. They use a durometer, a hardness scale 0 being the softest and 100 being the hardest. They don't go below a80 because they found that durability isn't great below this but have tested as low as a60 bushings. A bigger person that rides enduro-style terrain might want an a96 or a98 rated bushing. A lighter person might want the opposite but in the end, it comes down to personal preference. 

They put an a90 bushing on all new mount setups so people can get a good feel for their mid range option. The bushings are high quality yet inexpensive (they achieve this because they use skateboard bushings that are already developed and produced in massive quantities around the world) and a wear item designed to be replaced each season or depending on how hard or often someone rides.  

Complete mount system includes: 

• 6061 Aluminum ADV Platforms (65mm wide x 107mm length) 
• Stainless steel mounts
• Sleeve bearing (8x10x20mm) included for 8mm OD' footpeg pins. 
• Right and Left spring included. 
• Chromoly steel spindles with reusable thread locker. 14mm wrench. Torque spec 40 ft/lbs 
• A90 (medium flex) rated bushings
• Cleats and stainless steel machine screws. M3x18mm. These can simply be replaced by going to your local hardware store when damaged or worn out. 
• Bushing bolts. 8mm Allen wrench. Torque spec 30 ft/lbs

 They designed their hardware to bend rather than break in a significant impact. A wrench or adjustable wrench will quickly and easily bend the bolt back straight. Please avoid using a hammer. A little leverage from a long-handled wrench or pipe will do the job. The whole system is rebuild-able and serviceable.

They Fit Kawasaki KLX110 and Yamaha TW200 however some of these bikes may need a little modification by yourself, Please check the size carefully before you buy. If you make mods to the footpegs for fitments it will void all warranties and return policies. 

License plate bolt with bright white LED light. The simple way to light up your plate.