Search Products

All the advantages of a flatslide pumper carburetor at a much friendlier price than a Keihin FCR.

Our complete genuine Mikuni TM40 pumper carburetor kit comes with alloy adapter rings bonded to the carburetor body for a firm reliable fit in the stock air boots. We also include a remote mounted choke knob, complete instructions along with a wide range of main jets and pilot jets for fine tuning or to accommodate bikes with extensive modifications.

Cat Crap is the #1 voted anti-fog on the market. Lens cleaner and anti-fog in one. Works for all lenses, eyewear, goggles, helmet visors, etc.

Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids. Fits stock shock.

• 30% stiffer than stock
• Preset and stress relieved for long life
• Custom wound from aircraft quality spring steel
• Powder coated finish

Heavy duty shock bumper. The stock bumper is prone to disintegrating with age. If you are re-valving your shock it's a good idea to be sure the bumper is in good shape.

The KLX 250s comes softly sprung which can be great for lighter riders who are not using the bike for hard off-road riding. This Cogent Dynamics, custom engineered spring fits your shock like the OEM spring (without spacers or adapters) and firms up the rear suspension.

• 2006-current KLX 250s 6.2 Kg/mm for most riders 150 to 200 lbs
• 2006-current KLX 250s 7.0 Kg/mm for most riders over 200 lbs + or for more aggressive riding conditions.

*Spring color may vary due to specification requirement and availability. 

 The perfect option for the DIY'er.

The Cogent Dynamics Shock Shaft Assembly is ready for installation. The Cogent shock shaft also features an external rebound damping adjustment. Just what you need to have the ultimate in rear suspension control.

Does not include a spring. Compatible with both stock and aftermarket springs.

Requires 5wt shock oil

Quality replacement parts for servicing your shock.

• Shock shaft bushing
• Oil and dust seal
• Shock bumper
• Reservoir bladder cap

Complete kit to replace the bearings and seals in the DR650 shock linkage. Includes the lower shock bearing.

Genuine Yamaha fork seals and dust wipers.

Add a fresh set of inner and outer bushings for a complete fork restore.

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.

Damping Rod style forks are notorious for being too harsh, too mushy and too easy to bottom. Gold Valve Cartridge Emulators remedy this problem by controlling the compression damping with a tuneable valve. The Emulator sits on top of the damping rod and is held in place by the main spring.

Simply put; Emulators make damping rod forks perform like well-tuned cartridge forks. Installation and tuning for any condition or rider preference is very straight-forward. 

Simple to install and completely tunable for all conditions and rider preferences.
 

Rebuilding your engine? Here is a complete gasket kit for your TW200. Includes: Head Gasket, Base Gasket, Stud Gasket, Head Side Cover O-Ring, two Valve Cover O-Rings, Base O-Ring, Stud O-Ring, Rocker Shaft O-Ring, two Cam Chain Tensioner O-Rings, Intake Manifold O-Ring, two Valve Stem Seals, Exhaust Gasket, Left and Right Side Cover Gaskets, Pump Cover Gasket, TDC Plug O-Ring, Crankshaft Nut Plug O-Ring, and Oil Filler Plug O-Ring.

Kit includes all seals in the TW200 engine (including crank shaft seals) except valve stem seals. These are high-quality seals made in the USA.

High quality aftermarket paper gasket.

If you need a new clutch, you probably need a new gasket to seal that cover when you are all done. Genuine Yamaha part.

• Cleanable and reusable filter
• 35 micron stainless steel mesh
• Stainless check ball and stainless spring
• CNC aluminum caps front and rear

Higher pressure in the cooling system, raises the coolant boiling point and increases protection from coolant loss due to overheating.

23 PSI - 1.6 Bar.

• High-temperature silicone guaranteed to 356° F
• Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
• Single molded, Y-piece hoses eliminate the need to reuse OEM 3-way fitting which reduces weight and eliminates leak points
• Three layers of reinforcement fabric offer high burst pressures and provided better debris/crash resistance
• UV stable colors don't fade with heat or sun and are color matched to OEM brands

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

12mm Thread

285cc big bore kit includes:

Wiseco piston 78.00/+5.00 10.5:1 (with rings, pin & clips): 

• All Wiseco Pistons are forged from high silicon, low expansion aluminum which offers superior strength, reduced weight, improved heat transfer, and longer life.
• Diamond turned finish from one of the many CNC computer controlled turning centers guarantees you a perfect finish with no size variation. Wiseco pistons can be installed in any of today’s cylinder bore compositions
• Wiseco’s state-of-the-art computerized manufacturing facility is dedicated to supplying both the high-perfomance racer and recreational enthusiast with the finest forged piston available in today’s market place.

HotCams stage 1 camshaft:

• High-performance racing camshafts
• Stage 1 performance camshafts are drop-in cams that are designed to be used with stock valve springs
• In most applications, Stage 1 cams deliver more torque.

Complete top end gasket set:

• High-tech materials provide unmatched reliability and performance
• Rebuild the engine with total confidence as each set is designed for durability and accurate fit
• Oil seals are genuine OEM replacement seals
• Performance sets designed for a piston replacement
• Includes every gasket, O-ring and seal required to rebuild a top end; valve seals, head, base, exhaust, tensioner, and other misc. gaskets and O-rings
• Does not include formed rubber valve cover gasket
• High-compression kits use .012" thick base gaskets to raise compression
• Cost-effective way to raise compression without expensive high-compression pistons or cylinder head work
• All gaskets made in the U.S.A. 

This is a great combination and a big 'bang for the buck' performance increase. 

No re-sleeving required. You will have to have your cylinder bored to fit the larger piston.

Billet plugs for your left side case. 

Includes both the timing mark plug and the crankshaft access plug.
 

A brand new camshaft purpose built for the KLX140! The KLX140 is the ultimate trail bike. It just needs a little more power.

• Adds 1+ hp to fully modified motor (170cc Big Bore kit)
• Makes more aggressive race-style of power
• Bike still starts easily and idles smooth
• Same camshaft as used by the BBR Race Team
• No exchange required
• 92 octane ok

Note: The BBR KLX140 Performance Camshaft installs the same as the OEM camshaft (valve clearance IN: .002"-.003" / EX: .004"-.006"). We recommend you purchase an OEM Kawasaki KLX140 Service Manual to assist you when installing this camshaft.

High Quality Replacement Wheel Bearings and Seals for your TW200.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Stamped from heavy gauge stainless steel, Giant Loop® Mounts bolt onto virtually any motorcycle, snowmobile, snow bike, ATV, UTV, SxS, 4×4—and even boats. These mounts help keep straps away from hot exhaust while shortening strap lengths for maximum stability and helps make installation of Giant Loop Saddlebags, Panniers, Dry Bags, and Tank Bags even easier. 

Sold as a set of two (2).

• DIMENSIONS: 2.5″ L x 1.75″ W (64 cm L x 44 cm W) Hole: 0.39” (10 mm)
• MATERIALS: Stamped heavy gauge stainless steel.

The Front Rack gives a lot of options for functionality.

CycleRacks are made out of Schedule 40 11/16 black steel pipe, bent in a press, and welded together in a jig.

All of their products are 100% made in the USA. If the rack is ever broken for any reason, CycleRacks will replace it for free, you just pay the shipping.

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

• Complete with all necessary mounting hardware
• Fabricated with 1/2 inch steel tubing, MIG welded
• Finished with a semi gloss black industrial grade powder coat
• Comes with left and right side racks, each side weighs 2 lbs
• The TW200 side racks are intended to work hand in hand with our ENDURO Series rear rack.

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

The cargo racks are then hard clear anodized for durability. PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.

Comes complete with all hardware and easy install instructions.

Their lightest and slimmest setup for carrying essentials on aggressive off-road rides. This saddlebag is ideal for carrying inner tubes, tools, fluids, snacks and other trail riding necessities. Allow the Mojavi to transfer the weight from your backpack to your motorcycle for improved rider endurance and comfort. Resistant to water, mud, snow, and dust. Straps on and stays on – no matter what.

• Fully-waterproof roll top design.
• Mounts without drilling. No hardware required
• Anchors to rear fender or Giant Loop Tail Rack.
• Bomb Shell™ construction and materials.
• Includes Hot Springs Heat Shield™ to Prevent exhaust from melting saddlebag or side panels
• Multiple mounting options with included Pronghorn Straps and fender hooks.

The MoJavi is designed to mount behind the seat directly to the fender or to a GL Tail Rack, but can also be positioned according to personal preference. Once positioned in the desired location, the saddlebag is secured to the fender or GL Tail Rack using the two included fender hooks and Pronghorn Strap. After mounting the saddlebag to the fender or GL Tail Rack, two side mount straps secure the MoJavi directly to the subframe or frame and hold the saddlebag firmly in place.

Optional GL Mounts allow one to secure the saddlebag to existing bolt-mounted points to keep straps away from hot exhaust components. An included Hot Springs Heat Shield prevents the MoJavi Saddlebag or side panels from making direct contact with exhaust components.

Specifications:

• VOLUME: 12 liters (732 cubic inches), comprised of two 6-liter side pockets.
• DRY WEIGHT: 3 lb. (1.4 kg), with all included components.
• DIMENSIONS: Two (2) side pockets, 4″ deep x 16″ long x 7″ wide (10 cm deep x 41 cm long x 18 cm wide).
• MATERIALS: Rugged Bomb Shell™ construction and materials, and military-spec fasteners. Aluminum thumb buckle compression straps. Highly abrasion-resistant webbing. Coated Fender Hooks. Stretch polyurethane Pronghorn Strap. Aluminum Hot Springs Heat Shield.

• Quickly dissolves dirt and grime without harming filter glues
• Simply spray on, hose off and re-oil filter
• Available in 15-ounce net wt. aerosol can

The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

• Uses long-life muffler packing for increased packing life
• Forest Service approved spark arrester

Delayed stock from manufacturer, please ask for availability.

• The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
• Constructed from aircraft grade aluminum and high strength stainless steel
• Sound output 96dB
• 8 pounds lighter than the stock muffler

 The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

• Uses long-life muffler packing for increased packing life
• Forest Service approved spark arrester

Another great combination package - the FMF Powerbomb header and Powercore 4 Muffler.

The Powerbomb header promotes better flow by allowing a small expansion of the exhaust gasses improving scavenging. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.

The PowerCore4 muffler was developed to increase the horsepower and torque throughout the entire power curve and give you a noticeable power increase that is very usable and beneficial, no matter what your riding style or ability is.

Some of the features of the PowerCore 4 include: space age internal packing for maximum packing life; hi-flo modular end cap; internal shape of core uses hi-flo technology; enhanced sonic evacuation provides for higher flow and increased power and removable spark arrestor.

The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.

The science behind the MegaBomb header may be FMF's greatest engineering accomplishment to date. You can bolt on a MegaBomb with an existing FMF Racing slip on for as much as a 3hp boost, plus the MegaBomb actually reduces noises levels by as much as 1.5dB. The MegaBomb technology is evolved to produce more low end to mid range gains as well as broadening out the mid to top end power gains over stock. MegaBomb is the next level technology you can have today.

• Produces long header torque and short header over-rev
• Reduces sound output as much as 1.5dB
• Increases output from stock motor as much as 3hp
• Stainless Steel Construction for durability

For FMF mufflers only

This is the gasket used between the header pipe and the stock muffler. This gasket is not needed for aftermarket mufflers!

Small tear on the top, as shown in the picture.  Fits Stock, Clarke, and Safari Tank has Carbon Fiber Top, Asphalt Sides, not welts. Sold as is.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as sock seats using the two bolts into the chassis, which provides a closer fit to the bodywork and tank.

2-Piece Mirror set.  Brand new, not installed, only one available.

Made from solid-billet aluminum with CNC-machining that sets them apart, these mirrors feature high-quality swivels for perfect placement without slipping. Mirror can be adjusted inboard or outboard of the bar end. 

Features and Benefits:

• Stem Length: 1-1/2 in.
• Fits 7/8 in. handlebars only
• Black
• Sold in pairs
• Supplied with longer bolts so they can be fitted with hand protectors
• 3-5/16 in Dia. x 1/2 in Dia

Small Scuff on top left that does not affect function or fitment, only visible up close.  Available in black only.  Comes with original packaging and all hardware.  Sold as is.

This DRZ400 rear rack, hand-built by B&B Engineering in Australia is made from 4mm aluminium 5083 plate tig welded to the support tubing circumventing the plate. This material was chosen because of its extreme suitability for welding as well as abrasion and impact resistance, and all of this keeping in mind the full weight of the bike and rider. Once complete they are given a polished finish or coated with a super-durable black polymer. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

These racks are smooth and sturdy enough to use as a grab handle.

Check out the bolt-on Luggage Plate for the B&B Rack for those times you need to carry a larger load!

Genuine Yamaha right side panel.

Right side only, in black.  Small crack in the plastic towards the back.  Does not affect mounting or fitment, sold as is.

The Folding Bar End Mirror has a beautiful case mirror backing plate and the arms are one-piece, eliminating screws and mirrors vibrating loose. The nylon swivel allows just the right amount of tension to be maintained for easy adjustment. 

Features and Benefits:

• Stem Length: 2-1/2 in.
• Fits 7/8 in. handlebars only
• Black
• Sold in pairs
• 3-5/16 in Dia. x 9/16 in Dia

PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.

Sold individually. 

 All Yamaha's will need a mirror adapter if you have the stock perch.

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

One folding mirror. Includes handlebar mount. Can be used on left or right side.

Sold individually.

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price.

Fits either left or right side and includes handlebar mount.

Sold individually

The Warp 9 "3-Finger" Lever Exclusive to ProCycle.  You asked for 3-finger levers, and we had Warp 9 make them for us. Brake lever includes a nice billet clamp with nylon sleeve to allow the assembly to rotate on impact. Will not fit with the stock OEM wind deflectors.

• Warp 9 Flex Levers are machined Billet, anodized and hinged brake levers with CNC machined master cylinder interfaces
• Adjustable reach allows customization to the rider's hand size
• Double hinge design allows lever to flex out of the way in most impact situations
• Pushrod or Bearing contact styles for smooth brake modulation
• Titanium Pivot / Black levers with laser-etched Warp 9 logo

Will not engage the clutch switch on 2010 and later models

Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.

• Meets or exceeds OEM specifications
• Made from aircraft A-360 die cast aluminum

Original Kawasaki factory replacement levers for your Versys-X 300.

Original Suzuki factory replacement levers for your V-Strom DL650.

Original Kawasaki factory replacement levers for your KLX250.

Genuine Suzuki replacement brake and clutch levers. Standard length. 

Available as a set or individual.

Please notice that this set is for '10-current DR650.

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.

Genuine OEM replacement choke cable.

• Increased air flow over the stock air filter
• Designed to increase horsepower and throttle response
• Easily fits inside the factory air box
• Larger surface area over foam filters which offers longer service intervals in dusty conditions
• Four layers of premium cotton gauze provides outstanding filtration
• Washable & re-usable, never wears out
• One filter will last the lifetime of your bike

Genuine Honda replacement air filter.

Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles. Flame laminated foam: Both "Stages" are not glued but heat sealed to provide maximum air flow. Light color foam makes it easier to see where the filter oil has covered and where it has not.

• Made of flame-laminated dual-layer foam, bonded with the highest quality glue to stand up to the roughest and toughest of any style of riding or terrain
• This filter, used with No Toil foam filter treatment, provides the best air filtration system in the world
• Fully open-cell structure for highest airflow and maximum protection
• Heavy-duty glue provides protection from all solvents
• Wide soft sealing ring for extra protection
• Flexible seams prevent cracking
• Original OEM size

• Increased air flow over the stock air filter
• Designed to increase horsepower and throttle response
• Designed to fit inside the factory air box
• Larger surface area over foam filters which offers longer service intervals in dusty conditions
• Four layers of premium cotton gauze provides outstanding filtration
• Washable & re-usable, never wears out
• One filter will last the lifetime of your bike

Light up your work area with this LED Flexible Light with Magnetic Base.

• Ultra thin, flexible, bendable and foldable
• Wrap it around, loop it over, set it down or use the magnets to hold it up
• Silicone construction body

B&B Off roads Ktm 950 and 990 adventurer master cylinder guard is made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All guards are supplied with all necessary mountings and stainless bolts. Made to cover and protects the rear brake master cylinder it looks great and is easy to install. Comes with polished finished.

The Rally Pro X-Strong features a high-impact, composite injection-molded outer guard surrounding an anodized aluminum inner guard. It is equipped with an indexed steel bar-end insert that ensures a secure installation, preventing Rally Pro handguards from slipping, even in challenging conditions. Additionally, a compact integral spoiler is incorporated into the design. The package includes a robust universal silver mount kit that is compatible with 7/8” (22mm), Pro Taper 1 1/8” (28mm), Magura, and Twin Wall aluminum handlebars.

Some models with adjustable windscreens may need the windscreen rotated forward, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.

Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select your desired color. 

Must add the corresponding size mounts to fit your handlebar.

For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.) 

Please Note: These handguards do not fit the Yamaha T7

Givi makes a great set of Crash Bars available for the Africa Twin. If your intentions include off-road riding of any kind, you really should not go without protection. Not only for you, but for your bike too. Even a slow-speed tip-over can cause damage that would make riding away impossible.

Your first choice is whether you would prefer black powder coated steel or Stainless Steel. Both are built from 25 mm diameter material welded to steel mounting plates. Select the lower set based on your color of choice and whether or not you have a standard transmission or a DCT transmission. You must select the correct model in order to ensure correct fitment. These provide protection for the engine and surrounding components. These units do NOT require the upper guards and work great on their own.

Included with each piece you receive a complete set of instructions and all mounting hardware required, in typical Givi fashion.

Please Note that these Crash Bars are also compatible with the Givi Skid Plate.

Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.

They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.

Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.

Mounting hardware and instructions included.

Can break or rivet chains from #35 to #530 like a pro.

kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.

kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.

NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.

Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

• Will not harm O-ring chains
• Easily adjustable for all chain sizes

Black anodized 49 tooth 7075 T651 aluminum sprocket.

Warp 9 stem puller

 Here is a list of the features of their CNC machined tool.

• Stainless Steel tip, wont break like softer brass tip
• Ribbed head for easier core removal
• Core tip threads into handle to protect tip from damage
• Includes spare valve core in handle for easy trail side repairs
• Tapered handle ends to make tip removal easier with gloved hands and non square edge doesn’t damage tool bags

The Rally windscreen from Parabellum is the perfect protection from wind and debris without sacrificing technical off-road capabilities. This is an upright rally type windscreen that looks aggressive and performs well under all types of riding. Designed primarily for the off-road / dualsport enthusiast, this shield keeps pressure off the rider's chest while commuting from home to adventure and back.

Mounting is accomplished by drilling two holes on each side of your headlight cowl using the provided template. The shield is 14 inches tall, 11.5 inches wide at the bottom narrowing to 8.5 inches at the top. Made from military aircraft grade cast acrylic.

This unit will not fit properly on '90 to '01 DR650 headlight cowls.

This kit combines common wide platform Yamaha YZ/WR foot pegs with brackets that are custom made to fit the TW200. If you are tired of standing on the stock skinny footpegs, get yourself a set of these fat boys and have pegs that match the tires on your T-Dub! For ultimate comfort, order the Pivot Pegz kit!

Simply unbolt your stock brackets and bolt these in their place. The bracket on the right side (brake lever side) is shorter than stock to correct the offset in the stock pegs. On kickstart models, the stroke of the kickstart lever is shortened slightly. Should you ever need to replace the pegs in the future, simply order pegs for the Yamaha YZ or WR 250/450.

New from Warp 9, top of the line Adventure Pegs. a full 5" long and 2.5" wide will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a single track trail.

• Ceracote coated Chromoly steel pivot for the ultimate in strength
• Replaceable 7075 T6 Aluminum Platform
• Permanent Stainless Teeth provide the ultimate in non-slip traction
• Built-in bottle opener in the bottom!

  NOTE: These pegs DO NOT fit the '18 model!

For the DR650 that has been lowered or converted with supermoto wheels. This stand is 1.5" (40mm) shorter than the stock unit.

Includes a rear shock mount cover plate and plug for lowing the stock shock.

Double the size of your side stand footprint and half the chances of your XR650L tipping over when parked on soft terrain. This laser cut, TIG welded 0.190" thick slice of aluminum bolts to your machine with just the addition of a hole in the stock side stand pad. Just takes minutes to mount! All hardware provided.

• Extra-thick material for durability
• Legendary Acerbis fit and finish
• Mount easily using included mount kits
• Caps, applicable mount kits, fuel lines, petcocks and Y-fittings per application included as needed; fuel pump for EFI models not included, designed to accept the stock one.
• Works with Acerbis' MDR gas cap

Get better range from your early KLR650 by adding an IMS 6.6 gallon fuel tank. The big tank also provides radiator protection.

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with POLYETHYLENE CROSSLINK for extra strength and durability.

Natural color is recommended if you wish to easily see the fuel level in the tank.

This tank requires you to re-use your stock petcock valve. Does Not Use OEM/Stock Shrouds

A replacement Clarke Gas Cap that fits most Clarke Gas tanks. Comes with rubber gasket.

Does your stock vacuum operated petcock not shut off when your bike is parked? Replace your stock vacuum operated petcock with this manual one. Must be shut off any time the bike is parked for more than a few hours. Fits stock or aftermarket tanks. Plastic tanks may need the hole 'ovalized' to fit the dual standpipes.

  Does not fit OEM XR650L metal tank

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank.

This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out.

Machined from billet alloy and anodized for good looks.

  Not for stock fuel tanks!

This device will pulse your brake light automatically. There are over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device.

Features:

• Independently programmable flash speed, flash duration, and pre-delay
• Works for LED or Standard Bulb Tail Lights
• All Solid State design
• Meets or exceeds OEM load rating specifications
• Over 1000 possible flash pattern combinations
• Simple programming setup with your brake lever
• Extremely compact unit size; 20mm x 20mm x 12mm

This new and improved DOT kit includes LED headlight assembly with plug-and-play wiring harness, a specially designed adjustable steel mounting bracket, and all the required installation hardware. No cutting, no drilling, no wiring modifications! Installation takes 5 minutes.

We highly recommend this kit over the non-DOT and original DOT kit.  The low beam has extra punch and a proper beam pattern cut-off.  The high beam throws light far and wide.  It’s already a crowd favorite!

Two colors to choose from, Chrome or Black. Light output and beam pattern are the same for either color.

Low Beam: 20W, 2,800 Lumens
High Beam: 35W, 3,600 Lumens
Color Temperature: 6,000k
DOT & SAE Compliant
CE, RoHS, ISO9002, IP67

Please note: Fits '87-'07 (Gen 1) only

This DOT kit includes LED headlight assembly with plug-and-play wiring harness, a specially designed adjustable steel mounting bracket, and all the required installation hardware.

No cutting, no drilling, no wiring modifications! Installation takes 5 minutes.

This kit is highly recommend over the non-DOT kit. The low beam has extra punch and a proper beam pattern cut-off. The high beam throws light far and wide. It’s already a crowd favorite!

Two colors to choose from, Chrome or Black. Light output and beam pattern are the same for either color.

• Low Beam: 20W, 2,800 Lumens
• High Beam: 35W, 3,600 Lumens
• Color Temperature: 6,000k
• DOT & SAE Compliant
• CE, RoHS, ISO9002, IP67

High quality carbon steel brake rotor.

A great option for every day use, or on your spare rear wheel.

• manufactured from unique ebc low carbon hpsr steel
• laser & cnc punched for lightness
• hardened and ground for precision braking
• nickel coated to resist corrosion

Galfer Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

• Significantly improves response and feel over factory rubber lines
• Largest performance improvement for your money over any other braking upgrade
• Stainless steel hose resists abrasion and puncture
• Teflon core does not degrade over time like rubber lines
• PTFE Dupont 64 Teflon® hose
• Feature a heavy-duty stiffener sleeve and route just like the factory lines
• Proprietary, premium fittings
• Banjos utilizes a unique machined channel and sealing surface for leak-free installations
• R&D and engineered in the USA
• GBrakes USA controls the manufacturing process, ensuring the highest level of quality control

Galfer Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

• Significantly improves response and feel over factory rubber lines
• Largest performance improvement for your money over any other braking upgrade
• Stainless steel hose resists abrasion and puncture
• Teflon core does not degrade over time like rubber lines
• PTFE Dupont 64 Teflon® hose
• Feature a heavy-duty stiffener sleeve and route just like the factory lines
• Proprietary, premium fittings
• Banjos utilizes a unique machined channel and sealing surface for leak-free installations
• R&D and engineered in the USA
• GBrakes USA controls the manufacturing process, ensuring the highest level of quality control

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

This anodized billet piece, brings a touch of color to your bike. Available in red or blue, it replaces the stamped steel clevis that connects your brake pedal to the master cylinder.

The stock sprocket retainer will rub the chain when it is used with 13 and 14 tooth sprockets.

• Use a rear sprocket with a higher number of teeth for quicker acceleration and technical offroad trails.
• Use a rear sprocket with a lower number of teeth for lower engine rpm's at highway speeds.
• Stock size is 50 teeth.

We recommend using the Rear Sprocket Bolt Kit when installing most aftermarket sprockets on your TW.

Quality steel rear sprockets.

Color may vary based on manufacturer availability, quality will not be compromised.

This an OEM replacement nut for your front sprocket.

Warp 9’s Pro Rim Locks are developed with Ice Track, Dirt Track and Flat Track Racers in mind!

Burnt Titanium Main Bolt

Lightweight Forged Aluminum Body

Black 7075 T6 Tower Nut and Base Washer

Base washer is machined to match each specific rim curvature for a perfect fit

About half the weight of OEM rim locks!

1.60 front  – 1.8 oz

1.85 front – 2.0 oz

2.15 rear – 2.3 oz

2.50 rear – 2.7 0z

3.00 rear – 3.10 oz

Ideal for smaller street bikes or smaller SuperMoto wheels.

Offers safety, durability with a ratio of grooves that has been increased to improve the balance between grip and wear.

Grooves run from the center to the shoulder to facilitate the evacuation of water and offer good grip on wet roads.

Possibly the best value for smaller SuperMoto tires.

Bias-ply and tubeless, S rated (max speed of 112)

Our Heavy-Duty tubes are made specifically for off-road riding. These are the sturdiest, highest quality tubes on the market. They are 3mm thick with natural rubber construction to better resist pinch flats and are easier to patch than butyl rubber tubes. These have a straight metal valve stem. New tubes deserve new rim strips. Don't forget to add them in to your order.

• 17" tube works with 120,130 and 140 metric tires or 4.50 to 5.10 inch size tires
• 18" tube works with 100 to 130 metric or 4.00 to 5.10 inch size tires
• 19" tube works with 100 to110 metric or 4.00 to 4.60 inch size tires
• 21" tube works with 80 to 100 metric or 3.00 to 3.50 inch size tires

Nitro Tape is a self-fusing silicone tape that's easy to remove with no residue.

It is waterproof, stretches up to 300%, has a temperature range from -65° to 500°F and insulates 8,000 volts per layer.

It resists UV, salt and corrosive chemicals.

20 mil thick, 1" wide by 10' long.

If you've split a radiator hose, this can help. A 'must have' for all tool kits.

Voyager is the original Trail Tech off-road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.

Trail Tech provides a one year warranty and unlimited free phone and email support.

• GPS enabled, active compass, elevation readings, distance and the ability to record ride data to SD card
• Speedometer and tachometer readings in real time, shows current and total ride time and battery voltage
• The 400x240 WQVGA LCD map screen is monochrome, displaying maps in black and white.
• Plan routes on the web, then import to Voyager as gray routes ready to ride.
• As a new track is recording, a black line appears indicating where you have been.
• Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.
• At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.
• 12V DC power required, make sure your vehicle has a battery.

A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.

This is a vacuum operated automatic chain oiling system to keep your driveline adequately lubricated at all times.

When properly adjusted the oil will last thousands of miles between refills. The Scottoiler kit includes one 250ml bottler of oil which is good for 10000 miles of riding.

Limited Quantity Available

The 12oclock Labs EXUP Emulator is used in place of the stock exhaust servo motor when you replace the stock exhaust with an aftermarket exhaust system. The microprocessor controlled EXUP, emulates the exact characteristics of the stock exhaust servo motor and its motor delay sweeps, keeping the ECU from displaying the dreaded check engine light. Weight is less than 1/2 an ounce and it is a direct plug and play replacement.

This optically clear headlight guard is CNC cut for a perfect fit. It is made of durable aircraft grade 3/16" thick cast acrylic which resists harsh rock impacts, trail scuffs, and incidental scratches. Velcro fasteners hold the guard firmly in place and allow for easy on & off should it need an occasional cleaning. Installation is a quick five minute job, positioning template included.