Our offices will be closed on Monday, September 1 for the Labor Day holiday. We will be back on Tuesday, September 2 to process your orders and respond to your inquiries.
Make the Edge-2 installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. Will need a crimp tool or set of needle nose pliers to crimp connectors on.
Make the Edge-2 installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. Will need a crimp tool or set of needle nose pliers to crimp connectors on.
OEM Fit for CRF450L rear tail light + turn signal connectors.
Pins pre-installed and pre-crimped with wire for easy install.
Set Includes: Connectors for left and right turn signal and tail light.
This kit is specifically for attaching After-Market tail light and turn signals.
The Barkbuster LED Indicator Lights for Jet, Storm & VPS Plastic Handguards to increase your visibility and safety using 15 high intensity LEDs that mount directly to the plastic handguard shells. Super bright auxiliary signals will make your directional intentions clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.
Features:
What's in the box:
Please Note: Not compatible with the electrical system on the Honda Africa Twin CRF1000L
The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights.
Features:
Fits Honda CRF450L Motorcycles (Front Turn Signals)
OEM Fit Left Front and Right Front turn signal connectors with wires pre-attached.
This kit is specifically for attaching After-Market turn signals to the front of the CRF250L / Rally or CRF450L.
This device will pulse your brake light automatically. There are over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device.
Features:
This replacement lens has a clear panel on the bottom to illuminate your license plate.
Allows you to bolt your license plate directly to the rear fender.
Does not fit Australian DR650.
Warp 9 Flex 3-Finger Levers are machined Billet, anodized and hinged levers with CNC machined master cylinder interfaces.
Adjustable reach allows customization to the rider's hand size.
Double hinge design allows lever to flex out of the way in most impact situations.
Pushrod or Bearing contact styles for smooth modulation.
This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.
The RS-2 is a potent and versatile design that evolved from their original TRC, engineered to provide increased power delivery. With a different pyramidal shape that features increased volume, the RS-2 is a quieter system with a larger core — and it offers the added bonus of outstanding performance in a value-priced package.
We recommend Anti-Seize on exhaust fasteners
By popular demand. This is our own mid-pipe adapter kit for the GSXR exhaust cans. The unique design works with both 3-bolt Hayabusa and 4-bolt GSXR mufflers. It features all stainless steel TIG welded construction with a laser cut adapter. A spring tensioned slip joint allows for heat expansion. A stainless steel hanger strap allows it to attach to your original muffler mounting point. No welding is required. Mid-pipe length is approximately 17" long.
This mid-pipe does not require a stock muffler joint gasket when used with the stock headpipe, the SS Pro-Flow, or the FMF headpipe, eliminating the hump in flow.
Don't forget a fresh seal ring gasket that fits between your muffler and mid-pipe adapter.
Their baffle was designed to replace the stock insert. The baffle produces a nice note compared to the de-restricted stock version and dyno test results showed an increase on 2 hp up top.
A noise test on the insert was conducted at the EPA Victoria Vehicle Test Station at Macleod under controlled conditions with Class 1 meters.
| Tested Bike | ADR Signature dB(A) & test RPM | ADR tess with B&B Tip |
|---|---|---|
| Suzuki DRZ 400 | 93 dB(A) @ 3375 RPM | 97 dB(A) @ 3375 RPM |
Some extra details:
Does not contain a spark arrestor. Check local laws on spark arrestors before purchase.
The ProCycle SS1 muffler was designed so this existing spark arrester will fit right in. This is also the same unit that is often adapted to the GSXR 40F0 muffler. It fits FMF exhaust as well.
B&B Off roads KTM 950 Super Enduro Heat shield is made from 2mm aluminum 5052 plate. The heat shield is design to create a barrier between your riding gear and the exhaust/muffler preventing heat transfer and burns to your protective gear.
B&B Off roads KTM 950 Super Enduro shock reservoir heat shield is made from 2mm aluminum 5052 plate. The heat shield is design to create a barrier between your riding gear and the exhaust/muffler preventing heat transfer and burns to your protective gear.
Helix brand exhaust springs made from zinc plated music wire. These are the springs we use on our GSXR Mid-Pipe Kit. If you lose one, or break one, these are the direct replacements. Sold as a Pair.
The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal, and is easy to install.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
The Corbin seat provides a platform that offer an increased area of body contact to give excellent weight dispersion and eliminate hot spots. Neutralized to curb the tendency to slide in the saddle which will greatly reduce fatigue. The shaping of the Corbin saddle relieves centralized pressure and supports from the sides instead. They build the saddle up with their exclusive Comfort Cell foam for a firm, supportive ride that lasts. Comfort Cell will support you for years and will provide a personalized fit after break in (approx 1,500 miles).
Accepts a removable backrest (as shown) for your passenger to add more comfort and security. Corbin's backrest install with a single screw and adjusts easily to your copilot's riding posture.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
On the model shown they've used a variety of materials for a custom yet subtle touch. Shown: Black Carbon-Fiber seating, Matte Black sides, Pigeon Grey welts, Silver stitching and Gold Corbin logo. (please specify details at checkout if similar look is desired)
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Developed for Baja racing, their comfort model maintains a similar contour to stock at the front of the seat and tapers out towards the mid-point to distribute rider weight over a greater area. The Comfort seat is wider than stock, but not so wide that it would hinder movement in aggressive race situations.
The comfort model strikes the perfect balance between an aggressive race profile and a wider more comfortable seat.
| Width: | 7 5/8" (194mm) |
| Height: | Same as OEM |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Developed for Baja racing, their comfort model maintains a similar contour to stock at the front of the seat and tapers out towards the mid-point to distribute rider weight over a greater area. The Comfort seat is wider than stock, but not so wide that it would hinder movement in aggressive race situations.
The comfort model strikes the perfect balance between an aggressive race profile and a wider more comfortable seat.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Only available as a Foam & Cover Kit for OEM pan.
| Width: | 7 3/4" (197mm) |
| Height: | 1" (25mm) Lower than stock |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
On this model, they built up the front of the seat, but dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
| Width: | 12.5" (318mm) |
| Height: | Same as OEM |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
| Width: | 9.5" (241mm) |
| Height: | Same as OEM |
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Designed specifically for the Royal Enfield Himalayan, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
NOTE: Not compatible with Royal Enfield braced handlebar.
Add Plastic Handguards for a complete kit.
The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.
Features
For Straight 7/8" handlebar
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards
Features:
What's in the box:
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
This Australian made radiator stone guard is machined from 4mm aluminium 5083 plate. The extra thickness of material provides superior strength and protection against larger debri as well as small rocks etc. Radiator guards can be fitted in approx ½ hr or less using basic tools.
All radiator guard mounting hardware is supplied where necessary.
Superior strength and protection against larger debri as well as small rocks etc.
If purchasing bash plate you will not need to purchase, the oil cooler guard is already incorporated into the bash plate.
This bash plate is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
This Australian made bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Fits with SW Motech & Givi Crash bars.
B&B Off Roads KTM 950 Super Enduro bash plate is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Features:
Yes, plastic! This is a product from our friends at Acerbis. Ultra tough injection molded reinforced composite. Flexible Heavy-Duty Polypropylene will not effect chassis ability to flex, will not effect handling
It's twice as thick as a metal skid plate but is only half the weight. Plastic glides over rocks and roots better than aluminum. It also reflects less engine noise. Full coverage, mounts to existing threaded holes at the rear of the frame.
Australian made, this protector bolts to the stock caliper bracket.
B&B Off roads Ktm 950 and 990 adventurer master cylinder guard is made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All guards are supplied with all necessary mountings and stainless bolts. Made to cover and protects the rear brake master cylinder it looks great and is easy to install. Comes with polished finished.
Protect your frame/paint from scuffs and scratches with frame guards. The DR 250 & DR 350 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.
Protect your motorcycle's levers from damage during an impact with the solid protection offered by Barkbusters aluminum bar lever protection handguards. Constructed with solid, heat treated aluminum backbones, these hand protectors use a two point mounting system that provides strength to withstand plenty of force. Motorcycle handguards by Barkbusters with their full wrap design, will help keep your levers operational and your ride from coming to a premature end in the event of a drop or other mishap.
Features:
Add Plastic Handguards for a complete kit.
radiator stone guard is machined from 4mm aluminium 5083 plate. The extra thickness of material provides superior strength and protection against larger debri as well as small rocks etc. Radiator guards can be fitted in approx ½ hr or less using basic tools. All radiator guard mounting hardware is supplied where necessary.
B&B Off Roads KTM 950 & 990 Adventurer bash plate is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
SpeedoDRD has been decreased in size to only 20mm square and epoxy sealed with weatherproof device connectors; making it the smallest, most durable, and most feature packed device on the market.
Note: The SpeedoDRD cannot alter your EXISTING odometer readout. The SpeedoDRD corrects and fixes the speed signal after it was altered by something else, such as sprocket changes or tires size changes or transmission changes.
The simplest piece they make, in a 3, 4, 6, 9, 12 or 15 foot length. This is the runner they use on the bag snake and the side bag haulers.
This piece can be added into any luggage hauling scheme you can dream up.
SPECIFICATIONS:
Construction is a simple piece of 1" Nylon webbing with a loop sewn into one end.
They use the 4 foot length in the side bag hauler kits and the 6 foot length in the bag snake kits.
The tension system integrated in this loop is a Green Chile innovation. You can add the ring tension loop to any 1" flat webbing system and have an instant upgrade. Even if you wear out the elastic in this loop it will not fail.
SPECIFICATIONS
The tension system integrated in this loop is a Green Chile innovation. Their elastics are custom woven inside tubular nylon webbing. This gives you all of the advantages of adding tension to a strap while maintaining the full strength of nylon webbing. You can add their cam buckle tension loop to any 1" flat webbing system and have an instant upgrade.
CONSTRUCTION FEATURES
Patent Pending
The DR650 has two unused 'switched' power plugs. One behind the headlight and another under the seat. This plug & pigtail assembly allows you to easily access a 12v power supply that is only on when your key switch is on.
Use it to power a GPS, charge a cell phone, run heated grips or even power a relay. Plug has leads approximately 1 foot long and a 7.5 amp miniature blade fuse.
SMX Carbon Look Rotor
Keep essential items easily accessible with the OBR ADV Gear Big Sky Tank Bag. The OBR ADV Gear Big Sky Tank Bag utilizes a detachable base panel that attaches and secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable buckle strap at the front. A padded spacious main compartment is perfect for carrying those items you wish to keep close such as cameras, documentation, rain jacket, etc. Two smaller lid pockets sit above the main pocket for storage of smaller items. Designed with the larger ADV bikes in mind, but will also fit the Enduro and Mid-Size Dual Sports.
Features:
Keep essential items easily accessible with the OBR ADV Gear High Basin Tank Bag. The OBR ADV Gear High Basin Tank Bag attaches/secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable strap at the front. Utilize the included interchangeable stow pocket for additional top storage or the map pocket to keep your route in constant view.
Features
Keep smaller essential items such as keys, camera, phone, tools, etc easily accessible with the OBR ADV Gear Switchback Tank Bag. The OBR ADV Gear Switchback Tank Bag attaches/secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable strap at the front. A great solution for adding storage without interfering with rider position.
New Design! The top mesh pocket now has a zipper closure!
Features
Need some extra protection from Mother Nature? We’ve got you covered with a full rain cover designed to slip over your Big Sky Tank Bag.
Features
* Big Sky Tank bag sold separately
Extend your storage options with OBR ADV Gear Crash Bar Storage Bags. The Crash Bar Storage Bag attaches to your motorcycles lower crash bars via a series of one wrap Velcro tabs. Each bag is constructed from extremely durable Ballistic Nylon material and heavy duty #10 zippers. Great for storing tire repair tools, chain lube and/or fuel stabilizer, spare tube, rain gear, etc. Helps to keep weight low and out of the way of the rider.
Features
Quick day trips often necessitate the need for additional gear storage … the OBR ADV Gear Enduro Saddlebag answers this need with a creative downscaled design of the OBR ADV Gear Adventure Saddlebag. The OBR ADV Gear Enduro Saddlebag maintains the same fit and function keeping the load in close to the bike and forward for improved handling. OBR ADV Gears 10l Enduro Saddlebags are a great solution for packing extra tools, rain gear, or even overnight gear for those with minimalist needs.
Features
Whether it’s a quick overnighter or a multi-day adventure … the OBR ADV Gear 38l Adventure Saddlebag will get you to where you’re going and back with all of your gear. Ample amounts of capacity along with adventure tested robust construction makes the OBR ADV Gear Adventure Saddlebag the bag of choice for the hardiest of adventurers.
Features
Need some extra protection from Mother Nature? We’ve got you covered with a full rain cover designed to slip over your 38l Adventure Saddlebags.
Features
* OBR ADV Gear 38l Adventure Saddlebags sold separately.
Fuel range and water storage is a concern of every adventurer. Easily carry 1l to 1.5l fuel or water bottles with the OBR ADV Gear Bottle Wrap. The OBR ADV Gear Bottle Wrap is a versatile solution to carry varying sizes of fuel/water bottles anywhere on your luggage kit. The OBR ADV Gear Bottle Wrap is a basic wrap panel with a series of web loops that allows secure fuel/water bottle attachment via your existing luggage straps.
Features
* Fuel bottle not included
Add a ProCycle Thermal Tumbler for a great value here.
Fuel range and water storage is a concern of every adventurer. Easily carry 2l fuel or water bottles measuring 6”x8.5”x3.5” with the OBR ADV Gear Bottle Holster. The OBR ADV Gear Bottle Holster is a versatile solution to carrying 2l fuel/water bottles anywhere on your luggage kit utilizing existing luggage straps via a series of web loops.
Features
* Fuel bottle not included
“Extras” are a common factor before and during any adventure. “Extras” are defined as items that either lose their organized place or are simply acquired during a trip. The OBR ADV Gear Extras Pouch is the perfect solution for these miscellaneous items. The OBR ADV Gear Extras Pouch helps to keep these items within easy reach as standard storage that needs to be accessible during the day or as simple overflow.
Features
Secure storage of a spare tube, tire irons, or random miscellaneous items is a must for any trail ride or adventure. The OBR ADV Gear Fender Bag is constructed from a heavy duty industrial grade ballistic fabric that secures tightly to any fender via oversized heavy duty gutter hooks. The OBR ADV Gear Fender Bag also utilizes an optional double button snap system that when used eliminates any potential for shifting of the fender bag when riding off road or over rough terrain.
Features
CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the stock rack. Attaches directly to the stock rack with four screws that are included. Available in either polished aluminum or a black polymer coating.
These plates are pre-drilled making installation of a RotoPax mount quick and easy.
Dimensions
CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the stock rack. Attaches directly to the stock rack with four screws that are included. Available in either polished aluminum or a black polymer coating.
These plates are pre-drilled making installation of a RotoPax mount quick and easy.
Dimensions
This luggage rack is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
Luggage plates will come with pre-drilled holes to suit rotopax mount. On request luggage plates can be pre-drilled to suit Givi top case mounting hardware.
DIMENSIONS
B&B Off Road's KLR650 Luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
DIMENSIONS
Our KTM 950 Super Enduro Luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
DIMENSIONS
Our KTM 950 Super Enduro Luggage Rack is CNC machined from 5mm aluminum 5083 structural plate.
All of our Carry racks & Luggage plate racks are supplied with the necessary mounting hardware needed for fitment.
DIMENSIONS
It seems that while packing for every adventure … we always end up with a few items that were either neglected to be packed, were last minute gear additions, or just needed to be packed in a readily accessible location…. The OBR Adv Gear Tool Pouch is the perfect solution for these miscellaneous items. Once packed the tool pouch can be slipped into any bag or attached externally using integrated webbing loops that are built into the pouch.
Features
* Tools not included
In order to be prepared for all possible mechanical mishaps along the trail or on any adventure, we are required to carry a certain selection of tools. The OBR ADV Gear Tool Roll will help keep those tools together and stored in an organized fashion easy to be found should one of those mechanical mishaps occur.
Features
A 'wrench style' tool to turn the 'square top' tappet screws. The wrench does a better job of holding the adjuster screw still while tightening the locknut. Slim and flat, this tool is easy to carry in a tool pack.
The KTM 950 and 990 adventurer luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
DIMENSIONS
ProCycle Dashboard designed to power multiple electronic devices. It can also be used for accessory lights, heated grips or gear, whatever you like. You can also use the two pre-drilled holes to attach a RAM mount and place your phone or GPS unit on that while charging.
The dash panel is manufactured from laser cut 5/64 mild steel and powder coated black. Also included are 2 weather resistant green LED rocker switches, a voltmeter with two 4.2 amp weather resistant USB ports, a wiring harness with a built in 20 amp fuse/holder, and complete instructions. Everything you need to mount it and connect the outlets back to the battery.
**If you would like the Voltmeter & USB ports to be powered by a "key-on" power source, add the "Auxiliary Power Plug" adapter to your order and you will be able to connect the positive and negative terminals directly into the aux plug behind the cowling for a quicker and easier installation as well.
ProCycle Dashboard designed to power multiple electronic devices. It can also be used for accessory lights, heated grips or gear, whatever you like. You can also use the two pre-drilled holes to attach a RAM mount and place your phone or GPS unit on that while charging.
The dash panel is manufactured from mild steel and powder coated black. Also included are 2 weather resistant green LED rocker switches, and a voltmeter with two 4.2 amp weather resistant USB ports, a wiring harness with a built in 10 amp fuse/holder, and complete instructions. Everything you need to mount it and connect the outlets back to the battery.
Fork brace precision machined from aluminum barstock. Drilled and tapped for optional lower fender attachment.
Hard anodized black for corrosion protection. Fits OEM forks. Split design allows for installing in minutes without having to remove the forks.
Precision tolerances – The tightest in the industry. Ultra-lightweight, for reduced unsprung mass.
Straight rate springs will give better control in the rough stuff. Sold in pairs.
Rebuild kit bearings are made using 52100 bearing steel
| Description | Qty per Kit |
| Bushing | 2 |
| Needle Bearing | 2 |
| Needle Bearing Shaft | 2 |
| Seal | 4 |
This listing is for either one throttle cable or one clutch cable, not both.
Replacement rubber boot for choke knob assembly.
Billet plugs for your left side case.
Includes both the timing mark plug and the crankshaft access plug.
This product is a windscreen lip that will offer more protection from the wind and weather. These mount directly onto your existing windscreen.
Standard Lip Smoke
New replacement rear fender for the Gen 1 KLR650.
Available in 4 colors.
New replacement side panels specifically made for gen 1 KLR650.
Available in 4 colors.
Will not fit KLR250
Depending on your application and preferences, more than one optional heat shield may be useful.
Quality replacement radiator air scoops. Sold in pairs for gen 1 KLR650.
Available in 4 colors.
Designed to maximize comfort and usability while providing a custom look and longer riding range. Corbin saddles are shaped to provide contoured support that lasts all day and will become your favorite accessory the first ride out. For this model, Corbin has positioned the rider in the 'sweet spot' which greatly improves the ergonomics and control.
This Corbin seat provides a platform that offer an increased area of body contact to give excellent weight dispersion and eliminate hot spots. Neutralized to curb the tendency to slide in the saddle which reduces fatigue. The shaping of the Corbin saddle relieves centralized pressure and supports from the sides instead. Corbin builds these saddles with their exclusive Comfort Cell foam for a firm, supportive ride that lasts. Comfort Cell will support you for years and will provide a personalized fit after break in (approx 1,500 miles).
Another great benefit of neutralized seating is that it creates a nice back support area for the rider. The step in the saddle gives both platforms a level posture and also creates 6.5 inches of lower back support for the rider. Even with the improved shaping, the Corbin Canyon Dual Sport saddle still provides a clean, flowing line on the bike.
You can add the optional removable backrest (shown) in passenger seating area to add more comfort. Corbin's backrest models install with a single screw and adjust easily to copilot's posture.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
