Tune your stock carburetor for better power and response, easier starting and quicker warm up. Mikuni main and pilot jets.
Our own jet kit for the DR650 stock Mikuni BST40 carburetor. Includes the extended fuel mixture screw and stainless steel Allen screws for the float bowl and top cap. Also included are new Viton o-rings for the float. Comes with easy to understand detailed instructions and diagrams. Includes a template for modifying the air box.
The jet kit for riders who want their bike to run well but do not want to modify the air box.
The Ti ProKit w/Titanium needle adds more power and better throttle response. Easy to install and tune - no slide drilling. No air box modification.
Includes: a main jet selection, adjustable titanium needle, clips (with extras), pilot jet, instructions.
The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely. With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.
Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune, Quickshifter or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.
All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device. This BASE map can be any of the available maps from the Dynojet website, or those you may have received from a third party.
(Map switch is not included. Sold Separately.)
Replaces the stock 2 wire Ruckus fuel level unit with a 3 wire unit that allows use of a multi-level fuel gauge.
Original equipment replacement 'in-tank' fuel filter.
Traveling where fuel quality will be questionable? Carry a spare fuel filter.
This Kit replaces vital components in the BST40 Carburetor including new a Float, Needle Valve, Gaskets, Seals, Diaphragm, Spring and Float Bowl Screws to return the stock Mikuni BST40 Carburetor to like-new operation. As a bonus we have included Viton o-rings for the float assembly and 4 stainless steel allen screws.
Replaces the stock screw. Easy adjustment, without a screwdriver, of fuel mixture while the bike is running. For Keihin FCR carburetors.
A ProCycle exclusive. This is our favorite air filter for the DR650. Made just for us by the folks at DT1.
NoToil cleaner NOT recommended with this filter. May cause delamination.
Twin Air's high quality materials and superior construction deliver unbeatable performance and protection. The hands-down choice of more World and National Champions than all other filters combined.
Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.
PSR's fin rear rotor protector. CNC machined from forged aluminum and then anodized gun metal in color. Just remove your existing caliper bracket and remove the pins, install them on this new one and then put the caliper and fin back on. It doesn't get much easier. In the event of damage to the fin, it can be replaced separately.
CNC machined from 2mm thick 5052 marine grade aluminum to protect your frame from scuffs and scratches and to keep those wandering pivot covers in place. These guards have a fine polished finish to give your DR a really classy look. These guards are supplied with all the necessary mounting hardware.
The Givi skid plate, manufactured from 5mm aluminum, is lightweight and offers excellent protection for vulnerable engine components, whether you have a standard or DCT transmission. All necessary hardware and instructions are included. Compatible with stock sidestand and centerstand.
Provide absolute protection for your AT by including Givi Crash Bars, available in either Black powdercoating or Stainless Steel.
This skid plate is extremely strong, manufactured from a 5 mm aluminum bottom with 4 mm thick side walls, offering complete protection of the engine block. This unit is built with precision-manufactured mounts that fit directly into the existing frame mount, creating a robust connection that distributes the forces not only to the mounting points but also to the bikes steel frame in case of ground contact. 8 mm strong rubber sliders also help to absorb and distribute impact forces. This unit completely replaces the wimpy stock plate constructed from just 2.5 mm material.
In addition to providing better protection and a sliding surface for impacts, this guard also offers better header and exhaust protection. Cutouts for both oil drain screws mean you don't have to remove it for changes. This plate is also compatible with Honda side stand as well as the SW-Motech Centerstand.
Provide absolute protection for your AT by including Crash Bars and the Skid Plate Extension, all made by the folks at SW Motech.
This unit is NOT compatible if with the optional shift lever on the DCT version.
The Safari Bash Plate is a bit bigger and more protective than the Big Tour model. Made from the same 5mm 5083 plate, this plate extends further up the front and around the sides of the motor. There is a specific DCT model that wraps up even further to help protect the important parts on the right side. (See last image.)
Fits with the OEM centerstand, but will NOT work with lower engine crash bars. Will work with Upper Crash Bars from SW-MOTECH, Hepco and Becker and OEM Honda units. Remember, all B&B bash plates are quality built and supplied with all necessary hardware and detailed instructions. Foam or rubber is included wherever it is required.
The Big Tour Bashplate from B&B Off Road Engineering is built from 5mm 5083 aluminum plate providing protection from rocks and sticks and other debris. This plate will work with the OEM centerstand and most crashbars.
If you are headed out for miles of back roads and trails, please consider the more protective Safari model. All B&B bash plates are quality built and supplied with all necessary hardware and detailed instructions. Foam or rubber is included wherever it is required.
B&B Off Road Engineering Radiator Guards are much stronger than the plastic OEM guards. Made from extruded aluminum and then CNC machined, these guards us a louver design like those of a modern motocross machine which provides maximum protection while allowing maximum airflow through the radiator for excellent cooling.
With the mounting system for these guards, they are easily and quickly removed if you need to get in for a good cleaning. Remove four easily accessible bolts and the guards are out of the way.
WILL NOT FIT WITH SW-MOTECH UPPER TANK BARS! Modifications will be needed to fit with the crossbar of the crash bar that runs in front of the radiator.
Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.
The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.
Acerbis 5.3 gal tank adds function and great looks to your DR650. This high capacity fuel tank incorporates modern lines and high quality construction that can't be beat. Includes gas cap, petcock and all mounting hardware.
Installation of the Acerbis tank requires relocation of the front turn signals. Otherwise the stock signals will contact the tank at full lock. Our Turn Signal Relocation Brackets Move the front turn signals up and forward to clear the bigger tank.
High quality clutch cover gasket. If you are servicing your clutch, a new gasket will prevent oil leaks.
Includes head, base, intake, & exhaust gaskets.
High quality left side case gasket. If you are servicing your stator or starter clutch gears, a new gasket will prevent oil leaks.
Put fresh O-rings on your KLR when you do your next oil change. Here you have new ones for the Oil Filler and the Oil Filter Housing Cover.
Replacing your clutch or removing that side cover for any reason? You are going to need a new gasket for the cover to ensure a leak-free assembly.
Dragging clutch? Hard to find neutral? Maybe it feels like it doesn't fully release. These problems can be caused by worn thrust washers in the clutch assembly. Most DR650s show wear on these items. Kit includes #1, #2 and #3 in the diagram.
Designed to improve the life and durability of your clutch, Barnett's "Dirt Digger" provides better rideability with less slippage compared to stock.
Heavy-duty springs help prevent clutch slip in high-performance motors.
Stage 1. Excellent mid-range and top-end power increase. Uses stock valve springs and rockers
Fitment Specs: Exhaust Lift: 7.45; Exhaust Duration at 1.00mm: 265°; Intake Lift: 8.0; Intake Duration at 1.00mm: 238°
High performance camshaft for the CRF150F 03'-05' and CRF230F. Higher lift and duration than stock.
These valve springs are required when using the BBR High Performance camshaft for the CRF150/230F.
A set of four high quality valve stem seals.
CRF230F 240cc Kit:
Big bore kit for the 2003-2005 CRF150F. A simple bore in bore kit that includes BBR's high performance camshaft and valve springs for added performance. This cam features higher lift and duration than stock. Complete kit includes piston, rings, pin, clips, BBR MX cam, valve springs and gaskets. This is the quickest way to add the most power to your bike. Great when combined with our exhaust system, Rev-Box, and Free-Flow airfilter. Requires machining of stock cylinder for installation.
Providing unbeatable performance and exceptional value, Hi-Flo is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
You pay $3.79 per filter with our value 5-pack!
Superior Filtration:
This should be the last oil filter you will ever buy. Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. Most good paper filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Flo's stainless filter catches items down to 35 microns "absolute", which is about 3 times better than most good paper or brass filters. The pleat seam is welded, able to withstand up to 600 degrees in our filter, not glued, like paper filters.
Raises compression from stock 9.5:1 to 10.5:1 for more power and snappier response. The high quality forged piston from JE is almost a full ounce lighter than the stock cast piston. This makes for less vibration and a smoother running motor. Fits the standard size stock bore.
A high quality torsion spring puts more consistent force on the tensioner lever. Requires drilling a small hole in the case to seat the spring. Drill bit included.
High quality replacement master link for the DID 428 non-oring chain
Machined from impact and wear resistant chromoly steel. Heat treated, then finished with a nickel coating for corrosion resistance.
Genuine Kawasaki replacement chain guide. This guide mounts to the lower swing arm.
Premium drive belts offer longer life than standard ones. A worn drive belt can affect your scooter's top speed.
Lost your side panel hardware? You aren't the first! We've got replacements. Two side panel screws, two special washers and the rubber insert that protects the side panel from the muffler.
Three-stage removable, reusable, black nylon push rivets. Comes in a package with 10 individual rivets. The Africa twin has lots of these holding together the body work. They are easily lost or damaged. Carry some spares in your tool kit.
Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride. Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base. Open mesh side panels allow heat to escape. Easily inflates by mouth with no pump needed. Mounting straps and Repair patch kit included.
9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.
Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.
This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit harsh after a couple hundred miles. These very comfortable sheepskin seat covers give you that extra bit of 'cush' and provides superior air circulation. Velcro straps allow easy install and removal when you don't need it. Measures 14" wide by 19" long, the perfect size for Dual-Sport seats.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
On this model, we dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
This is for ONLY the Foam & Cover and it DOES NOT include the seat pan(s).
| Width: | 11 3/4" (298mm) |
| Height: | Same as OEM, 1" (25mm) Lower on Adventure Sport model |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the midpoint to distribute rider weight over a greater area.
On this model, they built up the front of the seat to reduce the slope-into-tank feeling of the stock seat. The Africa Twin Rally seat works with either the Comfort rear foam and cover kit, or the matching Rally rear kit, which makes a flat surface that allows the rider to use the full length of the seating area, making it the best choice for aggressive offroad situations.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
This is for ONLY the Foam & Cover and it DOES NOT include the seat pan(s)
| Width: | 11.5" (292mm) |
| Height: | 1" (25mm) Taller than stock Same as OEM on Adventure Sport model |
Front Foam and Cover Only
Seat Concepts seats are constructed using a foam material that is higher quality than OEM seat foam. Their proprietary formula is plush, while still offering the necessary amount of support. Their unique comfort and shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These great features combine to offer you a custom seat feel, and provide greater enjoyment and increased rangefor long commutes, or Dual-Sport rides!
The Complete Seats come assembled with an high quality aftermarket pan and ready to ride.
| Width: | 12 3/8" (314mm) |
| Height: | Same as OEM |
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as sock seats using the two bolts into the chassis, which provides a closer fit to the bodywork and tank.
| Width: | 11.5" (292mm) |
| Height: | Same as OEM |
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps. 14" tall & 10" wide.
Will not fit 1 1/8" oversize handlebars.
Muddy conditions are the bane of ADV bikes with low fenders. Get more clearance between your front fender and tire. Our kit uses CNC machined, black anodized brackets. Lifts the front fender 20mm.
Keep your cables lubed up and working freely, with Motion Pro's Cable Luber. This tool is used to inject lubricant into any cable housing. Clamps over housing and cable allowing an aerosol can with nozzle to be connected. Once the lubrication solution runs out the far end, the cable is lubricated.
Cogent Dynamics 10.27 kg/mm shock spring for the big Honda. This will help you get through the whoops or just help handle that extra baggage on the rear. This is 15% stiffer than the stock spring. Designed to be the correct fit for the Honda OEM rear shock on your Africa Twin so that it fits your shock without modification.
*Spring color may vary due to specification requirement and availability.
The Öhlins Africa Twin shock has knob adjustable rebound and compression damping on a 46mm machined aluminum body combined with a hydraulic remote preload adjuster with a hose mounted actuator and mounting bracket. The gas reservoir uses a much higher quality compression adjuster/head valve along with a solid separator piston to prevent gas bleed-over. The improved adjuster circuits provide a wider range of adjustability.
Solo riders with light loads should select the 9.7 spring. 2-up riders or heavier loads select the 10.7 spring.
Features and benefits of this Öhlins shock:
The progressive factory springs are well known to be way to soft for most riders. Cogent Dynamics straight rate springs will give better control in the rough stuff and when loaded up.
Sold in pairs.
The .72 springs are 28% stiffer than stock and will be a great choice for most riders
Not compatible with Adventure Sport ES
Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids.
Link lowers the rear of the bike by 7/8".
Comfortable at a stop or on technical trails.
Installation takes about one hour, and only a few minutes more to drop the forks in the front to match.
This link fits both manual and DCT transmission models.
Machined billet aluminum with interchangeable inserts (+15mm, -15mm). Includes bearings and seals.
Damping Rod style forks are notorious for being too harsh, too mushy and too easy to bottom. Gold Valve Cartridge Emulators remedy this problem by controlling the compression damping with a tuneable valve. The Emulator sits on top of the damping rod and is held in place by the main spring.
Simply put; Emulators make damping rod forks perform like well-tuned cartridge forks. Installation and tuning for any condition or rider preference is very straight-forward.
Simple to install and completely tunable for all conditions and rider preferences.
The Yoshimura RS-4 is a proven choice to improve the performance and sound of the Africa Twin.
Removing the stock muffler saves over 4 pounds and makes the 988cc parallel twin engine growl!
The V2 Series Slip-On muffler features an aluminum body, TIG welded components, stainless steel inlet tube and a great new look. This Lightweight Slip-On weighs approximately 5.5 lbs.
The DG Performance systems offer increased throttle response, power and torque. Standard sound level is approximately 98 db. Equipped with a US Forestry approved spark arrestor.
Includes the Enduro Series RS-2 muffler and stainless steel header. This potent and versatile design is engineered to provide increased power and power delivery. The RS-2 has a pyramidal shape that features increased volume, and is a quieter system with a larger core — and it offers the added bonus of outstanding performance in a value-priced package.
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.
Two options are available: stainless steel and carbon fiber. The stainless steel features ASIS 204 stainless steel with a special sandblasted finish giving it a titanium-like look. The carbon fiber option is the lighter than stainless steel and features a flat finish that exposes the intricate carbon fiber weave.
The Galfer steel braided brake lines for the big Twin CRF1000L replace the stock rubber lines to enhance braking performance. Stock rubber lines expand under pressure giving a spongy and inconsistent feel at the lever/pedal.
This kit includes all 7 lines involved in the ABS braking system front and rear. These high quality lines utilize the finest materials available to eliminate expansion: Teflon inner hoses wrapped in 64 strand staInless steel weave, heavy duty hardware and machined fittings. A Crush Washer relief channel provides an effective double seal to stop leakage. Each line is replaced from the master cylinder all the way to the calipers and labeled to help with installation.
All the parts of this kit are designed, engineered, manufactured, tested and quality assured in the USA! All of these parts come with a lifetime warranty. Everything needed is included: Brake Lines, fittings and all necessary hardware and detailed instructions.
Includes front and rear brake pads
EBC rear replacement brake rotor. High friction billet steel.
Like most machines, the OEM pegs on the Africa Twin are for the birds. They are small and provide a minimalist platform to control the motorcycle and they are uncomfortable if you stand on them for very long. You can install new, larger pegs or you can bolt on these beautiful aluminum extenders on top of the stock units. You can see the stock peg inside the topper in the upper image.
If you stand for very long these pegs will pay for themselves quickly. CNC machined with slightly rounded edges on the teeth so they won't eat up the soles of your boots, then anodized black, these are pretty and functional. 2.32" x 3.38" is nearly double the contact area of the stock pegs. Mounting hardware and detailed instructions are included, making installation a snap.
Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.
Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.
Weighs just 2 pounds for a full 11" x 11" storage area. Fully welded construction from 16 gauge mild steel tubing then powder-coated black textured finish. Rack has a rigid 4 point mounting system. Has tabs to allow mounting the stock tool bag. All hardware and detailed instructions included.
You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.
Made 'down unda' by B&B Off Road Engineering in Australia, these racks are CNC machined from 5mm 5083 aluminum plate with lots of slots around the edge to attach your RokStraps or other tie-down devices. The plate attaches directly to the CRF rear frame with four screws that are included.
There are four options for this plate, two sizes (Mini and Maxi) and two colors each (Polished and Black Polymer coating). The Maxi Plate is 18" wide at the seat, 13" long and 8.5" wide at back. The Mini Plate is 12 3/4" wide at the seat, 11" long and 9 1/4" wide at the back.
The Big Tour Extension optional add on below is a forward extension for the Luggage Plates shown above. CNC machined from the same 5mm 5083 aluminium plate, this covers the rear portion of your seat and turns that area into a solid platform for packing more stuff for your RTW adventure.
Pro Moto Billet Cargo Racks are strong and functional while looking great as well. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.
The Big Tour Extension is a forward extension for the Luggage Plates.
CNC machined from the same 5mm 5083 aluminium plate, this covers the rear portion of your seat and turns that area into a solid platform for packing more stuff for your RTW adventure.
You can combine it with either the Maxi or Mini rack and then get the combo in either a Polished finish or a Black Polymer coating.
*Extension plate only, mini / maxi plate sold separate, or in complete set.
The Happy Trails SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags.
Features:
The HelmetLok cable is coated, to protect your helmet and bike. Small and compact enough to fit in your pocket, jacket or on your belt loop. HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point. A 'T' Extension is included if you need additional space between the lock and your helmet, and for helmets with quick release buckles.
Don't be weighed down carrying your helmet around anymore. Just use the simple to operate, carabiner-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy security and freedom with a HelmetLok.
A nice place to mount auxiliary lights on your KLX where they will be high and easy to reach for adjustment but still tight to the cowlings. They will not interfere with controls, body work or the fuel tank.
Constructed of 1/8" stainless steel they are intended for LED lamps in the 2" range, but with a slight slotting of the mounting holes, will work great with 3" lights as well. Includes longer bolts to for the upper triple clamp mounts.
Kit includes:
This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.
Sold individually.
All Yamaha's will need a mirror adapter if you have the stock perch.
Simple, clean looking matte black mirrors have an extra long stem. Great visibility for taller riders.
Sold in Pairs
Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.
OEM throttle cable.
The Snap Jack is an easy to use, portable, sturdy jack for chain lubricating, adjustment and chain drive maintenance. Also, simplifies cleaning. It can lift the rear tire up to 1/2" to allow the tire to spin freely. Includes front brake locking strap and handy carrying bag.
A must have when blazing new or old trails!
The Stash Box is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, lockable, vehicle styling is unaffected, and easy accessibility.
Latex free gloves for the shop or garage.
This tool helps ease the pain of accessing the neutral safety switch. This holder is the quickest and easiest tool out there to get a grip on that hard to handle hub.
Laser cut to the exact pattern that EBC makes their clutch plates from, it makes loosening and re-tightening the clutch nut a breeze, and minimizes the likelihood of damaging the clutch hub.
You have to pull the rotor off the crank of your KLR to access the doohickey. The offset in this factory Kawasaki wrench makes that very easy. It is very difficult to get a standard wrench to hold the crank to get the flywheel/rotor off.
Clymer motorcycle repair manuals are written specifically for the do-it-yourselfer. Whether it's routine maintenance or more extensive repairs involving engine and transmission disassembly, Clymer repair manuals provide all the information you need about your motorcycle. With step-by-step procedures, detailed photography and extensive use of exploded views, each manual is based on the complete disassembly of the machine. Unlike OEM manuals, which are purposely designed for the professional technician with an impressive array of specialized tools, equipment and knowledge, Clymer manuals are designed for the first-time user.
The DR650 manual features 278 pages of color wiring diagrams, illustrations and photographs. There are 15 chapters, ranging from general information and troubleshooting to brakes, suspension and full color wiring diagrams.
The KLR650 is rather hard on the cush drive rubbers. Replace these any time you feel excessive play in the sprocket hub. Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier.
It is a good practice to replace your sealing washer with every oil change. These 10 piece kits are made up of 5 Copper washers and 5 Aluminum washers. The manufacturer recently decided to make half of the kit Copper washers as that is the material of choice for many OEM manufactures. This gives you the opportunity to decide which you prefer, but either will work great at creating a leak-free seal between the case and the drain plug.
Extra protection for your motor. A strong magnet at the end of the plug picks up metallic flakes in your oil.
Special tool to remove the flywheel/rotor from the end of the crankshaft. You have to remove the flywheel/rotor to upgrade the doohickey.
Two feeler gauges with angled ends to make checking the clearances easier. Stock valve clearances are .004" intake and .008" exhaust (.10mm in. and .20mm exh.)
Designed to enhance overall performance when installing a high-flow jet kit. This CDI box enhancements include:
This unit may also be used to replace a defective CDI box on a stock machine. For 1990 - 2007 models only.
A professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.
Includes Tips 5.1, 5.6, 5.8, 6.1, 6.3, 6.5, 6.7, 6.8, 6.9 and Spline drive.
