Search Products

CNC Machined high quality aluminum folding levers.

Lever folds outward to prevent breakage in the event of a crash.

Automatic lever position restoration provides quick recovery from the crash.

Ultra precision machine cut for super light weight construction, high precision and quality.

Available in 4 finger lever length to fit your riding style.

Made of durable aluminum for extreme strength. Titanium color anodized finish.

Sold Individually

Quality genuine Honda replacement levers. Standard length.

The Warp 9 shift lever is 7075T6 CNC arm, the Warp 9 logo is laser etched into the finish. 

Includes a black folding aluminum tip and stainless spring and pivot pin for years of rust free use.

1" longer than stock

This assembly includes one Doubletake Arm and one Universal Base Kit. 
This mounting system will attach to your current Doubletake Mirror. A mount can be used on either side. 

To mount 2 mirrors you need to buy 2 kits. Mirror not included

The Go Cruise 2 cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. 

• Adjustable to fit most any size grips for 7/8" and larger bar sizes
• Easy to install, no tools required
• Install or remove in seconds
• Relieves stress on your wrist on long trips
• Rests on brake lever to hold throttle open
• Roll off throttle manually to disengage Go Cruise

Designed to mount to the front of any mx/offroad grip for added control in WET/MUDDY conditions. A necessity for those pouring down, rainy days on the trail to enable mechanical traction between your already installed grip set and the inside of your 1st row of knuckles. Each Mud Knuckle is injection molded in-house at ODI and includes 8 Safety-Wire Slots to perfectly secure to the front side of your grips. Improves traction in extremely wet and/or muddy conditions.

KIT INCLUDES:

• QTY X 2: Mud Knuckle - injection molded traction strips (Length: 100mm/4”)
• QTY X 8: 6” strands of Stainless Steel Safety Wire

• Grips not included.

• Dual-bonded foam design filters out even the smallest dirt particles, while allowing more airflow than two separate layer filters (flow bench proven)
• Twin Air filters are slightly smaller than stock to make them easier to change and to increase dead air space around the filter for better performance
• Flat foam sealing ring securely seats against the airbox, even in the worst riding conditions

• Made of flame-laminated dual-layer foam, bonded with the highest quality glue to stand up to the roughest and toughest of any style of riding or terrain
• This filter, used with No Toil foam filter treatment, provides the best air filtration system in the world
• Fully open-cell structure for highest airflow and maximum protection
• Heavy-duty glue provides protection from all solvents
• Wide soft sealing ring for extra protection
• Flexible seams prevent cracking
• Original OEM size

• Designed to fit in the factory air box exactly like original filter
• The best selling replacement air filter for competition motorcycles and ATVs
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

• Dual-bonded foam design filters out even the smallest dirt particles, while allowing more airflow than two separate layer filters (flow bench proven)
• Twin Air filters are slightly smaller than stock to make them easier to change and to increase dead air space around the filter for better performance
• Flat foam sealing ring securely seats against the airbox, even in the worst riding conditions

• Dual-bonded foam design filters out even the smallest dirt particles, while allowing more airflow than two separate layer filters (flow bench proven)
• Twin Air filters are slightly smaller than stock to make them easier to change and to increase dead air space around the filter for better performance
• Flat foam sealing ring securely seats against the airbox, even in the worst riding conditions

Twin Air Filter's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.

The air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air-the #1 filter system proven on motocross tracks around the world.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.

• Dual-bonded foam design filters out even the smallest dirt particles, while allowing more airflow than two separate layer filters (flow bench proven)
• High quality materials and superior construction deliver unbeatable performance and protection
• Backfire-resistant layer of foam laminated to the inside

Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles. Flame laminated foam: Both "Stages" are not glued but heat sealed to provide maximum air flow. Light color foam makes it easier to see where the filter oil has covered and where it has not.

• Made of flame-laminated dual-layer foam, bonded with the highest quality glue to stand up to the roughest and toughest of any style of riding or terrain
• This filter, used with No Toil foam filter treatment, provides the best air filtration system in the world
• Fully open-cell structure for highest airflow and maximum protection
• Heavy-duty glue provides protection from all solvents
• Wide soft sealing ring for extra protection
• Flexible seams prevent cracking
• Original OEM size

A quality foam Air Filter to replace the stock one. Uses the same guide and frame as the stock unit. It requires foam filter oil to properly trap dirt particles. Don't forget the Evolution Air Filter Oil kit from No Toil.

• Designed to fit in the factory air box exactly like original filter
• The best selling replacement air filter for competition motorcycles and ATVs
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

• Manufactured from world-class materials to achieve optimum performance and engine protection
• Precision engineered to perfectly fit the factory airbox
• Direct replacement of original equipment filter

Genuine Kawasaki replacement air filter.

Genuine Honda replacement air filter.

Genuine Honda replacement air filter.

• Increased air flow over the stock air filter
• Designed to increase horsepower and throttle response
• Designed to fit inside the factory air box
• Larger surface area over foam filters which offers longer service intervals in dusty conditions
• Four layers of premium cotton gauze provides outstanding filtration
• Washable & re-usable, never wears out
• One filter will last the lifetime of your bike

No Toil air filter to replace the stock unit. Fits the stock airbox using the standard guide and frame. It requires foam filter oil to properly trap dirt particles. Don't forget the Evolution Air Filter Oil kit from No Toil.

• Made of flame-laminated dual-layer foam, bonded with the highest quality glue to stand up to the roughest and toughest of any style of riding or terrain
• This filter, used with No Toil foam filter treatment, provides the best air filtration system in the world
• Fully open-cell structure for highest airflow and maximum protection
• Heavy-duty glue provides protection from all solvents
• Wide soft sealing ring for extra protection
• Flexible seams prevent cracking
• Original OEM size

• Keep your EFI tuner secure with the Power Vision handlebar mount kit
• Vital ECU information can be within view, or use the imbedded datalog feature of the PV3 to log data and review later in Power Core software
• This universal kit will fit multiple handlebar sizes by using reducer bushings
• Works on handlebars up to 1-1/4”
• Made in the U.S.A. 

Please note that the Power Vision 3 Handlebar Mount is used in conjunction with POD-300 Digital Display

Complete kit to rebuild OEM carburetors.

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. 

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. 

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product! 

Will not void vehicle warranty

Power Vision’s easy-to-read, no-nonsense display puts performance at your fingertips, empowering you to choose from our library of pre-tested tunes or to build one yourself. The Power Vision tuning device updates the tables directly within the ECU to optimize the air/fuel ratio, keeping you in sync and in control.

Power Vision easily connects through the OEM-style connectors, so installation won’t keep you away for long.

When you’re back in the garage, your performance data can then be clearly seen using our Power Core software to help you improve your ride. The Power Vision device holds multiple tunes at once and allows you to optimize your ride for power, speed or fuel-efficiency. After you’ve flashed your ECU, you can either unplug the device or head out with Power Vision attached as an extra instrument panel.

Dynojet provides complimentary tunes that accommodate for popular configurations on supported vehicles.  Due to the vast amount of aftermarket parts, ECU strategies, and other variables it is possible that we may not have a tune that is compatible with your exact application.

• Easy-to-read high-contrast screen gives you full control over how you tune your ride
• Ability to flash your motorcycle from the road, whenever you want
• Quickly build your own tune or choose from a wide variety of trusted Dynojet-engineered tunes
• Weather resistant and shock resistant
• One-year warranty and unlimited tech support
• Proudly made in the USA

Gasket for the engine case cover over the clutch. Doing any clutch work, you probably want to replace this gasket so you don't have any leaks when you are all done with the project.

Here are the O-Rings you need when you perform an oil change. The largest one and the smallest one go inside the oil filter housing cover. The second largest one goes on your oil drain plug. The second smallest one goes on your oil fill plug. Replacing these O-Rings regularly will help keep your engine from seeping oil.

Adjusting your valves or setting your cam chain tension? Here are the O-Rings that fit in the TDC sight plug and the crankshaft nut access plug.

• Updated EXP (expanding friction disk) assembly
• Base material updated to provide better strength in high temperature environments, critical for the heat clutch systems create
• Internal wall bases redesigned for strength and rigidity, which helps translate to a more connected lever feel for the rider
• On the outside of the EXP disk, friction pads now match proprietary friction design found on Rekluse TorqDrive clutch plates, this design helps match oil flow characteristics on the clutch pack beneath, promoting improved cooling capability and consistent operation
• EXP 4.0 wedges have been improved to now use rolling contact with built-in pins
• Rolling pins versus sliding creates less friction and resistance, providing smoother engagement and a more responsive feel, creating stronger power delivery overall
• More direct power delivery, improved durability, and rider-focused functionality
• Engagement curve designs updated to better match modern motorcycle engine characteristics
• More tuning options with varying wedge weights and EXP springs

Barnett high performance clutch set. Includes 8 Kevlar friction plates, the 7 'loose' steel drive plates, stronger springs and a high quality clutch cover gasket.

Barnett clutch springs are made from the finest materials available.

Heavy Duty Barnett clutch springs are pre-set, shot-peened, and heat treated for performance and durability.

This is all you need to not only change your oil, but protect your motor as well. We include a magnetic drain plug, to help catch stray metal pieces, a 5-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.

• Magnetic Drain Plug
• O-Ring Kit
• 5-Pack of Oil Filters

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

E3 Resistor Spark Plugs

The unique design of the electrode maximizes the power generated by the spark plug through Diamond Fire technology. This electrode combines advanced performance capabilities and innovative technology to enhance the shape of the flame kernel. Consequently, the flame front ignites the air/fuel mixture more rapidly, accelerates heat transfer into the combustion chamber, and creates a more concentrated pressure front, facilitating a quicker pressure rise during the cylinder power stroke. The outcome is a more efficient combustion process and improved engine performance, making this a truly premium spark plug.

SW-MOTECH has specially built this centerstand for the Honda CB500X.

The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires.

• High quality materials and workmanship
• Stands securely when traveling with lots of luggage and during maintenance
• Bike-specific design for easy mounting and high cornering clearance
• Easy to lift up the motorcycle
• Outrigger for optimal leverage
• Best corrosion resistance due to sand blasting and powder coating of the surface
• Made of robust steel

SW-MOTECH has specially built this centerstand for the Honda Transalp XL750.

The indestructible, yet lightweight steel tube construction offers the best angle and ground clearance, makes it easy to jack up and provides stability - whether it's during maintenance or on the road. In most cases, you will no longer need to buy an additional swing arm stand. During long downtimes in the winter months, the centerstand helps take the load off your tires.

• Stands securely when traveling with lots of luggage and during maintenance
• Bike-specific design for easy mounting and high cornering clearance
• Easy to lift up the motorcycle
• Outrigger for optimal leverage
• Best corrosion resistance due to sand blasting and powder coating of the surface
• Made of robust steel

A must have for lowered bikes.

• Special Feature: Bigger kickstand shoe. Extends approx. 0.5" longer than stock and shortens up to 3.5"
• Material: Steel tubing with black powder coated finish for strength and durability

A must have for lowered bikes.

• Special Feature: Bigger kickstand shoe. Extends approx. 1" longer than stock and shortens up to 2"
• Material: Steel tubing with black powder coated finish for strength and durability

A must have for lowered bikes.

• Special Feature: Bigger kickstand shoe. Extends approx. 0.5" longer than stock and shortens up to 2.5"
• Material: Steel tubing with black powder coated finish for strength and durability

A must have for lowered bikes.

• Special Feature: Bigger kickstand shoe. Shortens up to 1.5" from stock kickstand length
• Material: Steel tubing with black powder coated finish for strength and durability

A must have for lowered bikes.

• Special Feature: Bigger kickstand shoe. 
• Material: Steel tubing with black powder coated finish for strength and durability
• 2008 - 2018, 2023+ KLR650 S (Lower 1", Raise 3.5")
• 2021 - 2022 KLR650 (Lower 3.5", Raise 1")

A must have for lowered bikes.

• Special Feature: Bigger kickstand shoe. 
• Extends approx. 0.5" longer than stock and shortens up to 4.5" for the KLX300
• Extends approx. 3" longer than stock and shortens up to 2" for the KLX300SM
• Material: Steel tubing with black powder coated finish for strength and durability

A must have for lowered bikes.

• Special Feature: Bigger kickstand shoe. 
• Extends approx. Stock length and shortens up to 4" for the DRZ400S
• Extends approx. 1.5" longer than stock and shortens up to 2.5" for the DRZ400SM
• Material: Steel tubing with black powder coated finish for strength and durability

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh set now avoid having an exhaust leak when you install your new exhaust. This is for a set of two gaskets.

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. Get a fresh one now to ease installation of your new performance muffler.

X3 EVO represents the off-road evolution: LeoVince has combined all its experience in the off-road world with cutting-edge materials and Italian design, enhancing freedom in its purest form.

The X3 EVO body is made of AISI 304 stainless steel with TIG welds handcrafted by specialized operators, to guarantee long-lasting performance. X3 EVO will allow you to face the most extreme environments and conditions because it does not fear water or mud, nor wear over time.

The LV logo is their tribute to a motorcycle culture that we have loved for 70 years and is laser etched on the body of the exhaust: it is as endless as their passion.

They manufacture the end cap in 100% real carbon, with their special 2x2 twill carbon fiber, specifically designed to resist high temperatures and make the X3 EVO even lighter.

The matte clear coating, in addition to enhancing the carbon texture, protects the end cap from wear and UV rays, keeping the X3 EVO always in a perfect shape.

The sound of X3 EVO is already unmistakable at low revs. X3 EVO has a direct interior, specially conceived to channel the exhaust gas in an optimal way, to unleash a deep sound, giving a new voice to your bike.

The X3 EVO's Spark arrester has been tested and approved by the United States Forest Service and is essential for off-road riding in compliance with regulations, with more peace of mind, more respect for the environment and more fun.

No repacking required. The LeoVince X3 Enduro is made with TIG welded stainless steel internals and aluminum outer shell. It features a semi-direct chamber design that is maintenance free. It's quiet too! Our own in-house testing showed a 84dB sound level using the USFS J1287 testing procedure. That is a bit louder than stock but significantly quieter than other aftermarket mufflers. It includes a certified Spark-Arrester. This muffler requires a stock muffler joint gasket when used with either the stock headpipe or the FMF headpipe.

The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike. Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.

Features:

• Protects the frame in the maximum friction area
• Use of rubber to increase grip and therefore control of the motorcycle
• Easy assembly and dismantling with expander and plastic bands

Available in 2 colors

• Provides flat surface on both sides of the frame for better bike holdings.
• Made of 2mm thickness 5000 grade aluminum for durability.
• Hairline processing surface finish.
• Comes in a pair, bolt on design, and no modification required for installation.

Features:

• Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit. The installation on frame mounting points lends additional stability and allows for easy installation.
• Underbody protection against stone chips and collisions
• Offers more protection through secure and stable attachment points
• Reliable and easy installation on original attachment points, modifications to the motorcycle are not required
• Bike-specific development for perfect fit
• Mounting material included in delivery
• Durable design made of high quality aluminum alloy

The 2023-2024 Honda XR150L skid plate protects your bike no matter the terrain. The XR150L skid plates are made from high quality aluminum and offer full coverage. It comes with unique, proprietary hardware that requires no drilling and tapping into your dirt bike. Comes standard with a clear anodize for extra protection. Buy your skid from the industry's longest-running skid plate manufacturer. Ensure your Honda stays safeguarded in style—made durable in the USA.

• Skid plate fits 2023 and up XR150L models
• High quality hardware included - custom made to never fail
• No drill and tapping required
• Extremely easy and fast to install
• Made in USA

Constructed of 3mm-thick (1/8"-thick) aluminum for heavy-duty, light-weight protection. Baseplate includes side protectors that wrap around the engine case to provide both bottom and side protection.

This is one of the toughest skid plates we've got. Manufactured from 3/16" aluminum that is laser cut and CNC formed, all joints are welded on both sides. The rear mounting bolts are fully recessed for protection. A welded block protects the bolt heads from being bashed and rounded from obstructions. Rubber isolators between the plate and the frame at these two bolt locations help to eliminate vibrations and keep noise down. Front mounts clamp around the frame for a solid connection.

The right side of the plate extends up to cover the oil filter and unbolts from the skid plate for easy filter changes. This skid plate has a black textured powder coat finish for great looks and durability. Includes stainless steel hardware.

Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.

They are all hand tig welded together with side engine guards. Installation is easy with their clamps that grip tight.

Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.

Mounting hardware and instructions included.

• Protects against wear, shock, abrasion, mud sand and debris
• Right side: clutch cover protection, water pump and lower crankcase
• Left side: ignition cover protection
• Resistant to high temperatures, numerous vents prevent overheating
• Mounting kit included, fits perfectly on clutch/ignition cover by taking advantage of the original screws
• Compatible with Acerbis skid plates

ProCycle's 14 gauge stainless steel case armor to protect your engine cases. These case guards bond to your clutch cover and stator cover with high-temp silicone (not included). Extremely tough protection from rocks. In a fall your brake pedal or shift lever can crack the engine case - leaving you stranded. Don't let it happen to you.

CNC machined from 2mm 5052 plate, these will protect your cases in the event of a bad spill. Mounted using a high-quality red silicone adhesive, which you can select as an Optional Add On so you can mount them up as soon as they arrive. Below is a link to Installation Instructions with photos to help you get them done properly.

Made to match the Honda XL750 Transalp, these crash bars are equipped with a weather- and corrosion-resistant powder coating in black. 

Crash bars by SW-MOTECH provide the necessary extra safety for tank, fairing and components. Designed specifically for these types of bikes, these accessories fit seamlessly with the lines of the vehicle and offer optimal cornering clearance. Bike-specific mounting systems enable reliable, easy installation onto original attachment points.

• Construction made of sturdy steel
• Weather- and corrosion-resistant powder coating in black
• Reliable protection for important components
• Highly stable construction appropriate for the peg length of the motorcycle
• Model-specific development guarantees precise fit and reliable frame linkage
• Optimized lean angle guaranteed
• Simple mounting by screwing on factory-made mounting points on the frame

*Rear fender with minor superficial scratches on the top of the fender, most likely not visible unless looking up close, and some will be covered when installed. Sold as is. Includes all pieces for complete rear fender kit.

ProCycle Plastics (formerly DSA) Rear Fenders include LED tail/brake light and license plate holder. Vacuum molded, these parts are a design improvement over stock.

Only available in Blue.

Minor scuffs on dash plate, only visible up close. Does not affect fit or function.  Comes as complete kit in original packaging, sold as is.

ProCycle Dashboard designed to power multiple electronic devices. It can also be used for accessory lights, heated grips or gear, whatever you like.

The dash panel is manufactured from laser cut 5/64 mild steel and powder coated black. Also included are 2 weather resistant green LED rocker switches, a voltmeter with (two) 2.1 amp weather resistant USB ports, a wiring harness with a built in fuse/holder, and complete instructions. Everything you need to mount it and connect the bikes electrical system.

Small scuffs on the inside of the bash plate as shown in image, does not affect performance or fitment.  Polished finish only, sold as is, all hardware included. Does not qualify for free shipping.

The Honda CRF1100 DCT Bash plate is a full coverage Rally style protection for frame rails & lower to mid engine cases. Constructed for more serious off road use in mind, it features multiple additional mount points, paired with a semi double skin 4mm 5083 aluminum Bash plate. All CNC machined and fully tig welded, the side wings are partial double walled for extra stiffness. It also features the addition of a HDPE end plate for the clutch case mated to a rubber puck insert on the plate for additional protection.

Finish Options

• Polished or Black Powdercoat

Whats Included-

• Heavy Duty Bash plate
• Engine Puck/ Bash PLate Puck
• 2 Mild steel mount brackets
• All mounting fasteners

Additional Info-

• Fits with genuine centerstand

Our Adventure casual t-shirt, slightly redesigned from the original. Classic ProCycle Logo on the front left and a topo map of our favorite local riding spot in yellow on the back. High quality soft t-shirt perfect for everyday wear.

T-Shirt Specs:

• Retail fit
• Tear-away label
• Side seamed
• Shoulder taping
• Black Heather: 4.2-ounce, 90/10 Airlume combed and ring spun cotton/poly, 32 singles

Folding tip, forged aluminum shift lever from BBR Motorsports. Stronger and lighter than the stock shift lever, with a beautiful anodized (titanium color) finish.

• Strong forged aluminum construction
• Steel knurled folding tip (chrome plated)
• Anodized titanium finish
• Laser etched BBR logo

A 5-pack of easy to use disposable funnels to help make any oil or fluid change cleaner and more precise.

A set of feeler gauges so you can adjust the valves on your Yamaha. Yamaha says that when the bike is cold, the Intake should be between .002" and .004" and the Exhaust should be between .006" and .007".

This set includes one gauge with a .004" on one end and a .005" on the other for your intake side and another with a .006" and .008" for the exhaust side.

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for wherever your adventure takes you! This tank is made from POLYETHYLENE CROSSLINK for extra strength and durability.

Fits EFI Models Only
Does Not Fit New KLX300 "R" Model

A replacement gas cap for your IMS tank. Newly redesigned to resist damage from new fuel additives that were hard on the seal in the old style cap.

These grommets are new Yamaha equipment and are used to help connect your side panels to the fuel tank on any year TW200.

If you are purchasing an IMS fuel tank you may need to purchase a set of these grommets as you will have to reuse your old grommets from the stock fuel tank.

For M8 handlebar bolts, the RAM-B-367U motorcycle handlebar base will replace the existing bolt with a 1" B size ball. This rubber ball base provides shock and vibration damping, and is compatible with a wide variety of B size RAM® double socket arms and device holders. The RAM-B-367U motorcycle handlebar base will work with any motorcycle that features an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.

• Includes rubber ball, M8 x 55 bolt, M8 x 60 bolt, M8 x 65 bolt (1.25 thread pitch)
• Compatible with any motorcycle M8 threaded bolt; ball base allows for connection to any B size RAM® double socket arm
• Made of marine-grade aluminum for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

Not compatible with handlebars that have a cross bar.

Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit. The installation on frame mounting points lends additional stability and allows for easy installation.

• Underbody protection against stone chips and collisions
• Reliable and easy installation on original attachment points, modifications to the motorcycle are not required
• Bike-specific development for perfect fit
• Mounting material included in delivery
• Durable design made of high quality aluminum alloy

Bike-specific light mounts made of powder coated steel allow easy installation and maximum stability, even off-road. Includes mounting material and instructions.

This listing is for the mount only, no lights included.

Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.

White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.

Dazzling bright Amber blinker functions. 

All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.

Yamaha T7 Specific plug and play kit using factory connectors, flasher and block off plates included.

Superior Filtration:

Honda recommends replacing this oil filter screen every 7500 miles.

JT Sprockets are made from the latest generation of computer design and control metal cutting equipment for maximum durability. Front sprockets are made from chromoly SCM420 steel alloy. All sprockets are heat-treated and hand-finished to meet or exceed the highest possible quality standards.

Currently available in 15 tooth size only, other sizes coming soon.

Available for stock gearing, 49 tooth rear sprocket

OEM Honda rear sprocket for the XR150L

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Warp 9 Off Road wheels are built with billet hubs, 7000 series aluminum rims and laced and trued with stainless steel spokes and nipples.  NAK seals, OEM bearings, Zinc plated nyloc hardware.

The 1.60" x 21" front wheel includes a wave brake rotor.

The 2.15" x 18" rear wheel is built using an upgraded cush drive hub that features polyurethane dampers and includes a rear brake rotor already mounted.

Rear wheel includes a Sprocket Carrier with 7075 T6 aluminum 45T sprocket installed that matches selected hub color.

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Warp 9 Dual Sport wheels are built with billet hubs, 7000 series aluminum rims and laced and trued with stainless steel spokes and nipples.  NAK seals, OEM bearings, Zinc plated nyloc hardware.

The 1.85" x 21" front wheel includes a wave brake rotor.

The 2.50" x 18" rear wheel is built using an upgraded cush drive hub that features polyurethane dampers and includes a rear brake rotor already mounted.

Rear wheel includes a Sprocket Carrier with 7075 T6 aluminum 45T sprocket installed that matches selected hub color.

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

All the parts you need to freshen up your front brake caliper. New piston seals, slide pin and boots. Fix that sticky or limp front brake.

The RS-2 removes 2 pounds from the stock unit and it also provided the XR an increase of +5% max HP and 1.7% max torque. Now the XR has gains across the entire power spectrum and is ready to tackle trails and highways alike.

This RS-2 Enduro Series Slip-on includes an installed USFS spark arrestor SA-02-K.

Yoshimura's RS-2 is proudly designed, developed and manufactured in Chino, California.

Dual Sport tube-type tires for the TW200 or the VanVan.

With its versatile tread pattern, the E200 makes an ideal OEM replacement.

• Aggressive tread pattern for traction on the trail
• Heavy Duty carcass construction
• Durable, long lasting rubber compound

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range.

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.

The ProCycle Axle Wrench set for your DR comprises a 19mm wrench designated for the front axle and a 24mm wrench for the rear axle.  These come etched 19mm/24mm.

Constructed from laser-cut, 3/16-inch thick zinc-plated steel for durability and corrosion resistance. With an overall length of 7.875 inches (200 mm), this tool provides substantial leverage while remaining compact enough for convenient storage in a small tool kit.

• Protects your heel from the chain and the rear sprocket
• Made of CNC machined A7009-T6 aluminum

The OBR ADV Gear 38L Adventure Rackless Saddlebag system features holsters with removable roll down dry bags for completely waterproof storage of your gear. 

Multiple molle attachment points let you strap on all sorts of additional gear, including water and fuel. An adjustable seat cradle flap accommodates both Dual Sport and ADV platforms.

 Ample amounts of capacity along with robust adventure tested construction makes the OBR ADV Gear Adventure Saddlebag the bag of choice for the hardiest of adventurers.

• Spacious total capacity at approximately 38L, 19L per side
• Water proof removable roll down dry bags that provide versatile and waterproof storage for your gear.
• Rackless design: at only 6 ½ lbs it saves weight over traditional frame racked systems
• Unique system shape that keeps the load in tight, while reducing interference with the rider.
• Heavy duty ballistic nylon construction with high strength UV resistant nylon webbing
• Padded inside/outside panels with load managing compression straps
• Universal design with adjustable seat cradle flap to fit both Dual Sport and ADV platforms
• Generous use of reflective webbing for increased low light visibility
• Versatile Molle Loops for added attachment and tie down points
• Load centralizing design keeps load mass in tight to the bike and forward for better handling both on road and off.
• Quick and easy On/Off versatility
• Lighter than hard panniers (and generally safer when off road)
• Backed by the OBR limited lifetime warranty and US based customer support
• Proudly designed and assembled in the USA!

System Includes:

• 1 holster system (left and right holsters)
• 1 pair removable roll down dry bags
• 1 pair rear looped anchor straps to work with a rear cargo rack
• 1 single length anchor strap to provide alternate rear anchoring option
• 1 D-ring strap
• Replacement one wrap tabs and one replacement ladder lock buckle

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

• Complete with all necessary mounting hardware
• Fabricated with 1/2 inch steel tubing, MIG welded
• Finished with a semi gloss black industrial grade powder coat
• Comes with left and right side racks, each side weighs 2 lbs

Precision Motorcycle Racks strongly recommends these side racks be used with their Top Rack because the racks use each other to mount properly. They were never intended to be used by themselves without the rear rack. 
If you are going to mount these side racks without the use of their top rack please select the extra hardware kit option that includes 2 brackets, 2 steel spacers, and an extra hardware kit that is required for proper installation.

These side racks will not play nice with any other brand rear rack, and installation without their top rack will prove to be quite difficult.

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

• Complete with all necessary mounting hardware
• Fabricated with 1/2 inch steel tubing, MIG welded
• Finished with a semi gloss black industrial grade powder coat
• Comes with left and right side racks, each side weighs 2 lbs
• The TW200 side racks are intended to work hand in hand with our ENDURO Series rear rack.

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

• Complete with all necessary mounting hardware
• Fabricated with 1/2 inch steel tubing, MIG welded
• Finished with a semi gloss black industrial grade powder coat
• Comes with left and right side racks, each side weighs 2 lbs

The CRF300L side racks are intended to work hand in hand with their ENDURO Series rear rack. 

If you plan on installing the side racks without their rear rack, you will need the spacer kit to fill in the empty space, which we will send to you at no extra cost. Please select the option when you place this in your cart.

Please note that you will need to remove the left side rack to access your lockable factory storage hatch.

Cogent Dynamic’s Pro-Series shock solution to replace the OEM damper unit for the Honda Transalp XL750. These shocks are made-to-order for each rider and shipped from our shop, setup to best match your riding needs. 

Their shocks feature: rebound bleed adjustment + compression speed adjustment + easy preload adjustment with our spring preload options.

Spring color may vary due to specification requirement and availability.

Please supply us with your weight, approximate luggage weight, and riding style at time of purchase.

• Race Tech's original bolt-on fork valving system for front cartridge forks
• Triple the flow area of stock pistons
• Put valving control on the shim stack
• Outstanding tunability; improved control, traction, plushness and bottoming resistance
• Complete instructions, Gold Valve pistons, valving charts, valving shims and "Technical Edge
• Fork Maintenance and Gold Valve Installation" video all included

Kit includes all the fork bushings, o-rings, snap rings and washers. This kit comes with what you need to completely rebuild your front fork bushings.

Race Tech Hi-Performance Fork Spring have the highest stiffness-to-mass ratio in the industry. This means they are lightweight for their particular rate. These spring designs have taken years of manufacturing experience. They require the finest materials and processes.

Race Tech Hi-Performance Springs have extremely accurate rates. They are heat-treated, shot-peened and preset so they cannot sack out.

OEM spring rate is 0.42kg/mm. 

A portable device that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices via USB cable.

• XP-1 is 6" x 2 7/8" x1" 14oz.
• XP-3 is 5" x 2 7/8" x 1" 12oz.
• Holds a charge for up to 1 year.

Also known as the pickup, trigger coil or pulser. This is a known weakness on the DR650. When it fails there is no spark, weak spark or the spark timing is thrown way off. This is a high quality replacement pulse coil. It has the correct polarity and color coded wires. Small and light enough to carry as a spare.

Higher Output Stator that is part of their Hot Shot Series product line for your Yamaha TW200 Dual Sport with stator OE# 4WP-85510-10-00. Rick's has field tested to show a 26.3% increase in electrical power. 

This stator will bring the output from 175W up to 221W to support your added gear. Whether you have heated grips or you're running multiple aux lights, this unit will give you the power that you're looking for.

This is an adhesive-backed foam kit, for the installation of small batteries into larger battery tray areas. Keep in mind that all Antigravity Small Case Batteries DO come with adhesive-backed foam in the box. This kit is for when you need extra foam or are doing installation in another vehicle.

Features

• Hi Density adhesive backed foam
• Help reduce vibration
• Easily cuts with scissors or razor knife
• 3 pieces of 6″ x 3″ x 0.5″ adhesive-backed foam

Chain guards may experience wear over time as a result of friction generated by the chain.  Refresh it with this genuine Yamaha part.