Luggage

Model

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

Side Cover Saddle Bag Guards, Procycle

DR650 '96 - '21
Choose Package
$129.95

ProCycle side panel guards to keep your saddlebags from fouling the side covers. Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.

Add Moose 20L Saddlebags for a very economical luggage solution.

 

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Side Rack Mount Bars for Hard Cases - ProCycle Rack

DR650 '96 - '21
$32.95

ProCycle Rack Adapter Bar for Mounting Hard Case Panniers onto ProCycle Side Racks

All you need to mount your Hard Cases to your ProCycle Racks. Set contains 2 marked Left and Right Brackets, made of aluminum with stainless steel bolts, and 2 Aluminum Nut Bars.

This is needed ONLY for ProCycle racks.   

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Side Rack RotoPax Mounting Plates

DR650 '96 - '21
Choose Side Mounts
Add Container Mount
Add Rotopax Containers
$39.95

Here we have right or left side plates that bolt to our ProCycle Side Racks for mounting your RotoPax fuel or water containers.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

Side Racks / Top Rack, ProCycle

DR650 '96 - '21
Choose Racks
Add Top Rack Signal Brackets
$389.95

ProCycle rack system is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

See the linked instructions for how-to videos.

Tool Tube

DR650 '96 - '21
Choose Tool Tube
Add Tool Tube Locking End Cap
$49.95

Our Tool Tube mounts in place of the little stock tool carrier. The tube is made from 3 1/2" O.D. ABS pipe. It's held by 3 strong powder coated steel straps. Both ends are sealed with waterproof expanding plugs. This is the ideal way to carry those items you always want to have with you on every ride. Tube is approximately 13" long.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end. Or you can order just the Locking End Cap and lock if you already have a Tool Tube.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Cargo Rack, Moose Racing

DR650 '96 - '21
$161.95

Steel cargo rack from Moose Racing. It features a nice wide platform and a durable powder coat finish. 17" wide and 10" long.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Cargo Rack, Pro Moto Billet

DR650 '96 - '21
Add Top Rack Turn Signal Brackets
$179.95

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

The cargo racks are then hard clear anodized for durability. PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included. 10.5"Wx11.5"L

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Top Carry Rack, B&B Off Road Engineering

DR650 '96 - '21
Choose Finish
Add Luggage Plate
$201.95

Hand built aluminum luggage rack from the B&B Off Road Engineering folks down under. This unit really is a beauty to look at and extremely rugged, made from 4mm 5083 aluminum plate! Tie down whatever you need with confidence. Whether it's your books to get to school or a bag to get across the country, no worries mate. Available in either bare polished aluminum or with a black polymer coating.

While plenty rugged to use as grab handles, you can keep your stock handles if you so desire. All necessary stainless clamps and bolts are provided.

Thumbnail

 Bike must have the DR250 Taillight installed to work with this rack. it will not work with the stock USA taillight.

If you want a wider platform for support, consider adding the luggage plate to this rack.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Top Rack Luggage Plate, B&B Off Road Engineering

DR650 '96 - '21
Choose Finish
Add Top Carry Rack
$98.95

CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the standard B&B Rack. Attaches directly to the B&B rack with four screws that are included. Available in either polished aluminum or a black polymer coating.

These plates are pre-drilled and countersunk from the bottom making installation of a RotoPax mount quick and easy.

Thumbnail

 This is for the add -on  Top Plate only.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Rack, Moose XCR Rear

DR650 '96 - '21
$99.95
  • 12-gauge steel construction
  • Multiple tie-down locations
  • Easy installation with no modifications required, all mounting hardware included
  • Powder-coated black texture finish
  • Holds up to 40 lbs.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Rack, Nomadic Rear

DR650 '96 - '21
$99.00

Simple, quick installation of this 1 pound rack made from rugged 1/8" 5052 Aluminum. A rigid 4-point mounting system, but still sleek and low allowing for seat removal with no hassles.

Features:

  • 12" long by 10" wide
  • Integrated turn signal mounts
  • Use with or without stock grab handles
  • 16 strap slots for securing cargo
  • RotoPax mounting kit compatible
  • All hardware and instructions included
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Rack, Pat Walsh Designs

DR650 '96 - '21
$119.95

The Pat Walsh rack has been a favorite of DR riders around the world since it was first introduced in 2009. They've continued to improve it each year and the new design is their best yet.

  • Large 12"X10" surface area
  • Solid 4-Point frame mounting
  • Rugged 1/8" 5052 aluminum
  • Laser-cut and CNC bent for precision fit
  • Use with or without stock hand rail
  • Integrated turn signal mounts if you choose to remove stock grab rail
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Rack - Precision Motorcycle Enduro Series

DR650 '96 - '21
Add Rotopax Containers
Add Container Mount
$104.95

Precision Motorcycle Enduro Series rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. these steel racks are built to handle any riding style you throw at them, now Rotopax ready.

Select racks have include a steel bracket to create 2 forward mounting points, this design is stronger and more well balanced than the typical "plate on the rear fender" design offered by other companies.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Rack RotoPax Mounting Plate for Stock Rack, JNS Engineering

DR650 '96 - '21
Add Rotopax Containers
Add Container Mount
$47.95

Increase your fuel and/or water carrying capacity. This mounting plate attaches to the OEM Suzuki rear rack and accepts the standard RotoPax mounting pedestal. The use of pressed-in threaded mounting hardware allows for quick and easy installation of the plate and pedestal. When not needed the RotoPax pedestal can be quickly removed and the tidy JNS mounting plate left in place.

  • 0.125" 5052 Aluminum, Laser cut / CNC formed
  • Powder coated black
  • Includes stainless mounting hardware

Order alone or with RotoPax Mount and Water or Fuel container. Get everything you need at one time.