Spring time is in full swing here at ProCycle. With these busy days please be sure to let us know if your order is time sensitive. We try to do as much as we can to accommodate your upcoming trip.
B&B Off Roads Honda CRF80, CRF100, XR80 & XR100 bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible.
All bash plates have a polished finish and have foam or rubber where required.
B&B Off Road Engineering KTM 1290 Bash plate is made from 5mm thick 5083 structural alloy plate. Rear mounts are 5mm stainless steel with a rearward facing lug that rests on the rear frame rail to prevent rotation of the bracket. There are 6 32mm hole in the underside to help flush debris and minimize noise. There is also a rubber damper glued inside to help reduce noise. Bash plate can be fitted with or without genuine KTM crash bars. All necessary mounting hardware for this is supplied.
T700 TENERE Bash plate was designed to withstand the harshest Aussie conditions. Bash plate is made from 5mm structural thick alloy plate and designed for maximum protection with minimum bulk.
Easy to mount and remove. Also includes a replaceable polyethylene linkage guard.
- Fully tig welded
- Comes in polished or black PPA coating.
- All hardware for mounting is included.
- 4 Flush fitting mounts, 2 M8 and 2 M6
- Weighs 3.8kg
- Fits with Genuine Centerstand
Fits EURO 4 only
Enjoy maximum protection and durability with an SW-MOTECH skid plate. Fully welded aluminum construction is engineered in Germany to provide proper protection from impacts, abrasions and projectile debris. Multiple ventilation slots on the front, sides and bottom of the skid plate permit maximum air-flow to keep your motor cool. Drilling, cutting, welding or any other permanent modifications are not required.
Features:
- Debris and collision protection for the engine
- Fully welded 4mm thick aluminum plate / black side made of 2.5mm thick aluminum
- Efficient underbody protection of stone-chipping and collision
- Provides protection for the vulnerable oil pan & lower engine cases
- 100% bolt-on, no drilling, cutting, or any other permanent modifications needed
- Ventilated design maximizes air-flow to prevent overheating
- Silver
- Designed & engineered in Germany
What's in the box:
- SW-MOTECH skid plate engine guard
- Mounting hardware
- Installation instructions
B&B Off Road's Honda CRF250 Rally bash plate is made from 4mm aluminium 5083 plate. This grade of aluminum is chosen because of its extreme suitability for welding and abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Bash plate is installed after first removing the lower OEM plastic bash plate/fairing.
One of the most advanced radiator protection systems available for the DRZ400. These guards feature maximum side and front impact protection by using a combination of CNC machined 6000 series aluminum and 5000 series alloy plate to create a complete system to protect your radiators from virtually every direction. Roost and debris protection is exceptional thanks to the angle fin design that leaves minimal exposure to the radiator core and veins.
Even with all of this protection, cooling airflow is still at its maximum with a front louvered panel built with fins designed to mimic the airflow characteristics of the OEM plastic fins. This panel can be removed easily facilitating cleaning of the radiator.
Three-piece modular construction eliminates the design limitations of one-piece designs. Integrated modular construction- Three piece modular construction allows for greater design flexibility eliminating the compromises inherent with one piece designs. Easy fitment no mods required- Radiator guards can be fitted in approx ½ hour using basic tools. Sold in pairs, but repair parts are available individually.
Can be fitted with 17L safari tank & Acerbis tank
Will not fit the "S" & "SM" model if thermo fan is fitted
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.
Features:
- Fits most motorcycle handlebars
- Maximum cold weather protection
- Compatable with or without Barkbusters backbones
- Lined with waterproof membrane
- Windproof
- Full wrap design
- Allows full access of controls
- Does not block view of handlebar thumb controls
- Simple to install and remove
Whats in the box:
- Two BBZ cold weather handguards
- Mounting hardware
- Instructions
Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.
They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.
Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.
Mounting hardware and instructions included.
This is the ultimate in radiator guards! It will protect your fragile radiator from nasty front & side impacts.
This ultra tough guard is constructed from 1/8" aluminum and is easy to install.
All Flatland Racing radiator guards have rear mounting brackets for that extra support! All Mounting hardware is included.
Made of military aircraft grade 3/16" cast acrylic, this guard will protect your lens from roost, rocks and branches. Optical clarity of the acrylic ensures brightness and projection of your headlight are minimally effected while all the while protecting your headlight from impact and abrasion.
Guards are held to the headlight lens with an industrial strength hook and loop system on each corner.
The B & B Eng. DRZ400 Bash Plate is made from 4mm thick 5083 aluminium plate. Strong and great looking, this is the top of the line protection plate for the DRZ. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.
You can keep your Cycra handguards even if you upgrade your handlebars to a different width.
Replacement mounts that keep your Cycra handguards fresh and tight.
CNC-machined from billet aluminum for the best fit and strength.
Please Note: These handguards do not fit the Yamaha T7
These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.
Works with 7/8" or 1-1/8" bars.
X-Factor guards may require you to cut your lever ends down, or use short levers.
The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.
Features
- High strength and water resistant 1680d Ballistic Nylon construction
- Universal easy on/off Velcro snap strap attachment system
- Reflective Front Strip for High Visibility
- ¾ Open design provides full coverage of the hand while not impeding controls
- Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
Protect your frame/paint from scuffs and scratches with frame guards. The DR 250 & DR 350 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.
Protect the most vulnerable components of your bike with this pair of R&G Engine Case Covers, now available in kit form. Engineered with 4mm polypropylene for superior strength, longevity and sleek aesthetics, these protective guards complement all other R&G crash gear perfectly.
Features:
- Crafted from 4mm polypropylene
- Bolt on installation atop existing engine case cover
- Low profile for maximum ground clearance
- Ultra lightweight with matte black finish
- Meets or exceeds AMA racing specifications
- AMA approved for use in any regulated event
This is the ultimate in radiator guards! It will protect your fragile radiator from nasty front & side impacts.
This ultra tough guard is constructed from 1/8" aluminum and is easy to install.
All Flatland Racing radiator guards have rear mounting brackets for that extra support! All Mounting hardware is included.
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Model Specific, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Compatible with all Barkbusters deflector guards (not included)
Add Plastic Handguards for a complete kit.
B&B Off Road Engineering Radiator Guards are much stronger than the plastic OEM guards. Made from extruded aluminum and then CNC machined, these guards us a louver design like those of a modern motocross machine which provides maximum protection while allowing maximum airflow through the radiator for excellent cooling.
With the mounting system for these guards, they are easily and quickly removed if you need to get in for a good cleaning. Remove four easily accessible bolts and the guards are out of the way.
WILL NOT FIT WITH SW-MOTECH UPPER TANK BARS! Modifications will be needed to fit with the crossbar of the crash bar that runs in front of the radiator.
Give your DRZ that factory prepped look and protect your frame.
These frame guards from industry leaders Works Connection are CNC cut and formed from aircraft grade 5052 aluminum. These not only protect your frame from scuff and rub marks from your boots, but also give you a flatter surface for better grip and control with your lower legs. All the necessary mounting hardware is included making these a very simple bolt-on installation.
Master Cylinder guard by Moose Racing will protect the exposed rear brake master cylinder from damage
- Fabricated from mild steel and expanded metal
- Powder-coated flat black
- Light weight and does not interfere with boot placement on the footpeg
- Easy installation with all required hardware provided
B&B Off roads KTM 950 Super Enduro shock reservoir heat shield is made from 2mm aluminum 5052 plate. The heat shield is design to create a barrier between your riding gear and the exhaust/muffler preventing heat transfer and burns to your protective gear.
B&B Off Roads Honda CRF125F bash plate is designed to give your mini bikes frame rails & engine casings some added protection. Your engine casings a very vulnerable part of your bike which can be easily damaged from roosted debris, sticks/logs while riding or from simply dropping your bike.
- Made from 4mm 5083 Structural Plate
- Fully tig welded
- Comes in polished or black PPA coating.
- All hardware for mounting is included.
- Foam insulated to help reduce frame contact/rubbing
B&B Off Roads Honda CRF230L bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible.
All bash plates have a polished finish and have foam or rubber where required.
B&B Off Road Engineering provides the most advanced radiator protection system available.
B&B RADIATOR GUARDS FEATURE -
1. Maximum side and front impact protection-Using a combination of CNC machined 6000 series 3 dimensional aluminum extrusion and 5000 series alloy plate we have created a system to protect your radiators from virtually every direction
2. Maximum roost and debris protection- Due to the angle fin design in our radiator guards there is very little of the radiator core and veins that are directly exposed to roost, debris and trail side sticks
3. Maximum airflow -B & B Off Roads unique aluminum front louver panel constructed from high strength extrusion allows 3 dimensional fins to be incorporated into the design to mimic the airflow characteristics of the genuine plastic radiator fins
4. Removable finned louver panel- Front panel only requires a few bolts to be loosened to allow for easy removal for cleaning of the radiator
5. Integrated modular construction- Three piece modular construction allows for greater design flexibility eliminating the compromises inherent with one piece designs
6. Easy fitment no mods required- Radiator guards can be fitted in approx ½ hour using basic tools
7. All parts available individually- If you damage any part of the radiator guards our design allows you to purchase only what you require
This bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Constructed of durable 3mm powder coated aluminum and easily installed utilizing existing mounts, the R&G Bash Plate (center plate) will protect the underside of your motorcycle from damage and debris. Add Case Guards (left and right plates) to your order for complete protection.
Givi makes a great set of Crash Bars available for the Africa Twin. If your intentions include off-road riding of any kind, you really should not go without protection. Not only for you, but for your bike too. Even a slow-speed tip-over can cause damage that would make riding away impossible.
For the upper set, you just need to select the matching color to the lowers you have ordered. Install them all at once, or the lowers alone for a while, then the uppers. You cannot order the uppers without the lowers though as they will no mount correctly. The upper crash bars protect important radiators and bodywork. Essential in the event of any kind of crash. These also make excellent mounts for auxiliary lights for added visibility.
Included with each piece you receive a complete set of instructions and all mounting hardware required, in typical Givi fashion.
NOTE: The upper units REQUIRE the lower crash guards for proper mounting and are not a stand alone item!
Please Note that these Crash Bars are also compatible with the Givi Skid Plate.
B&B Eng. has created a true 'Bash Plate' for the mid-sized XT. Wings on the side of the plate deflect debris from the center and side cases. Manufactured from 4mm 5083 aluminum plate which is selected for its extreme suitability for welding, abrasion and impact resistance. Available in a polished finish or a complete covering with a black polymer coating. All necessary stainless clamps and is provided as well as foam or rubber when required.
Constructed of heavy-duty machined steel, aluminum, and high-density nylon, R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks
R&G "Cotton" Reel Swingarm Spools are oversize paddock stand bobbins that perform double duty as lifting points for hook style paddock stands as well as protection for the swingarm of your motorcycle in the event of crash or drop.
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Model Specific, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Compatible with all Barkbusters deflector guards (not included)
Add Plastic Handguards for a complete kit.
Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.
They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.
Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.
Mounting hardware and instructions included.
(Note: This will not fit the Rally)
- Designed to minimize handlebar vibration for Barkbuster Handguards that can’t accomodate OEM handlebar weights.
- Sleek aerodynamic look.
- Forged Steel with powder coat finish.
- Fit in conjunction with most Barkbusters backbones (except EGO).
- Fits externally to the VPS backbone.
- Available in black.
- Sold as a pair
Weight:
360 grams/pair or
180 grams/each
Fitment Notes: If you have a hardware kit listed below see special fitting notes as additional parts may be required
BHG-010 Requires two additional M6x40mm countersunk bolts
BHG-032 R1200GS/A requires two additional M8x55mm countersunk bolts
BHG-045 G650GS requires two additional M6x65mm countersunk bolts
BHG-050 Will not fit
BHG-051 Requires two additional M6x50mm countersunk bolts
BHG-059 Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit
BHG-075 Will not fit
BHG-079 Will not fit
Don't cut the ball ends off of your levers! These billet spacers move your hand guards outward to allow clearance for the full length of the stock levers. Designed to fit steel or aluminum bars. Includes longer stainless steel mounting bolts.
Developed for the DR650 but may work on other models with long levers. (May require additional adjustment or modification on some models.)
Not compatible with Acerbis and Emgo hand guards
Protect your motorcycle's levers from damage during an impact with the solid protection offered by Barkbusters aluminum bar lever protection handguards. Constructed with solid, heat treated aluminum backbones, these hand protectors use a two point mounting system that provides strength to withstand plenty of force. Motorcycle handguards by Barkbusters with their full wrap design, will help keep your levers operational and your ride from coming to a premature end in the event of a drop or other mishap.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Compatible with all Barkbusters deflector guards (not included)
Add Plastic Handguards for a complete kit.
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Includes VPS left and right plastic deflectors
- Easy installation
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right VPS plastic deflectors
- VPS deflector fastening hardware
- Left and right adjustable position wind extension deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
This is one of the toughest skid plates we've got. Manufactured from 3/16" aluminum that is laser cut and CNC formed, all joints are welded on both sides. The rear mounting bolts are fully recessed for protection. A welded block protects the bolt heads from being bashed and rounded from obstructions. Rubber isolators between the plate and the frame at these two bolt locations help to eliminate vibrations and keep noise down. Front mounts clamp around the frame for a solid connection.
The right side of the plate extends up to cover the oil filter and unbolts from the skid plate for easy filter changes. This skid plate has a black textured powder coat finish for great looks and durability. Includes stainless steel hardware.
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Designed specifically for the Royal Enfield Himalayan, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Compatible with all Barkbusters deflector guards (not included)
NOTE: Not compatible with Royal Enfield braced handlebar.
Add Plastic Handguards for a complete kit.
The X-Factory Handguards from Acerbis feature a steel bar wrapped with an injection molded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering insurmountable protection from roost, debris, and extreme conditions.
A universal mount kit is included that allows for mounting on either 7/8" or 1 1/8" handlebars.
Will not fit XT250 with stock handlebars (oversize bars ok). Recommend Acerbis Rally Pro X-Strong to clear master cylinder.
- High-impact, composite injection-molded outer guard around an anodized aluminum inner guard
- Includes an indexed steel bar-end insert that mounts solidly and prevents Rally Pro handguards from slipping – even under the most demanding conditions
- Small integral spoiler incorporated into design
- X-Strong universal silver mount kit that fits 7/8” (22mm), Pro Taper 1 1/8"(28mm), Magura and Twin Wall aluminum handlebars included.
Some models with adjustable windscreens may need the windscreen rotated forward, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.
Bolt-on side case armor from Warp 9 Racing.
Made of High Density Polyethylene, the same very tough stuff they make their frame and axle sliders out of.
3mm thick complete side case coverage
6.5mm thick in the leading and bottom edges where impacts typically happen
Covers the oil filter which takes a lot of impacts on these bikes
Includes new longer case bolts to hold on the case guards
These hand-crafted bash plates from B&B Eng. are constructed from 4mm 5083 aluminium plate. Strong and lightweight, this material has been selected because of its extreme suitability for welding, abrasion and impact resistance. All the necessary stainless clamps and bolts are included. Plate has a polished finish with foam or rubber where required.
These hand-built units out of Australia are one of the most advanced radiator protection systems available! CNC machined 6000 series three-dimensional aluminium extrusion melded with 5000 series alloy plate to create a system that protects your precious radiator from almost any direction.
Designed with a fin angle that allows almost nothing to come in contact with the vulnerable core that is otherwise directly exposed to roost, rocks and all sorts of trailside debris. The fins are designed in a fashion that they completely mimic the designed airflow characteristics of the OEM plastic protector fins.
The protective finned louver panel quickly and easily unbolts to make clean-up a snap. Three-piece modular construction allows for greater design flexibility which eliminates the compromises that are built into one-piece designs. If any single piece of this unit is ever damaged, it is replaceable by itself, no need to replace the entire guard. Just give us a call. Installation is a snap, taking no more than 30 minutes with basic tools.
- Protect vital engine parts and cases from rocks and debris
- Clear anodized for corrosion protection and good looks
- Skid plates made from 3/16" 5052 H-32 aluminum
- Smooth underside won't snag when crossing logs
- Oil drain hole on all required models
- Heat-treated chromoly steel clamps keep plates mounted securely
- All mounting hardware included
Happy Trails exclusive Paris Dakar Nerf design for the ultimate in KLR650 protection. Loops of 5/8 inch tubular steel protect the expensive fuel tank and shrouds on your bike.
Included in this package is the fourth generation engine guard-highway peg combination giving the rider many more choices in riding positions for greater comfort mile after mile. The highway pegs provide bonus protection for the engine side cases, and they easily fold-up when not in use.
- Engine Guards require the Highway Peg kit for installation (included)
- Engine Guards cannot be run with the HT radiator/reservoir guard system
- Engine Guards are not compatible with the stock plastic skid plate
radiator stone guard is machined from 4mm aluminium 5083 plate. The extra thickness of material provides superior strength and protection against larger debri as well as small rocks etc. Radiator guards can be fitted in approx ½ hr or less using basic tools. All radiator guard mounting hardware is supplied where necessary.
B&B Off Roads KTM 950 Super Enduro bash plate is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
B&B Off Roads Honda CRF50, CRF70, XR50 & XR70 bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible.
All bash plates have a polished finish and have foam or rubber where required.
This master cylinder guard is made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All guards are supplied with all necessary mountings and stainless bolts. Made to cover and protect the rear brake master cylinder.
It looks great and is easy to install.
Comes with polished finished.
This skid plate is extremely strong, manufactured from a 5 mm aluminum bottom with 4 mm thick side walls, offering complete protection of the engine block. This unit is built with precision-manufactured mounts that fit directly into the existing frame mount, creating a robust connection that distributes the forces not only to the mounting points but also to the bikes steel frame in case of ground contact. 8 mm strong rubber sliders also help to absorb and distribute impact forces. This unit completely replaces the wimpy stock plate constructed from just 2.5 mm material.
In addition to providing better protection and a sliding surface for impacts, this guard also offers better header and exhaust protection. Cutouts for both oil drain screws mean you don't have to remove it for changes. This plate is also compatible with Honda side stand as well as the SW-Motech Centerstand.
Provide absolute protection for your AT by including Crash Bars and the Skid Plate Extension, all made by the folks at SW Motech.
This unit is NOT compatible if with the optional shift lever on the DCT version.
B&B Off Roads KLX230R bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.
The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.
Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Tough and weather shielding Storm handguards
- Aluminum backbones are compatible with all Barkbusters deflector guards
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right Storm plastic handguard deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
B&B fired up the CNC equipment for another beauty, a Front Sprocket Case Saver. A great investment the 6mm aluminum base will protect your engine cases should your chain ever break or derail. On top of that is a 4mm piece to keep your pants and other things out of the chain as well. This replaces the stock cover over the countershaft sprocket.
If you have a 16t front sprocket, mounting modification may be needed to fit.
Protect your frame/paint from scuffs and scratches with frame guards. The DRZ 400 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.
The Honda CRF1000L Twin Dakar Bash plate. Our all new engine protection system is designed to provide all the benefits of a lower crash bar and bash plate in one. It is constructed from 4mm & 5mm 5083 structural plate combined with 20mm heavy wall alloy tubing to form the outer profile. It is mounted in seven locations to make it the most rigid bash plate on the market. It has a narrower profile and fewer snag points than the conventional crash bars. Available in polished or black powder coat.
Fitment notes:
- Will fit with most upper fairing crash bars. Honda Genuine do not fit with bash plate on the standard models.
- At this stage, we do not know what aftermarket headers the bash plate will fit with.
- It has oil drain access points but for a full oil change with the filter, the plate must be removed (10min).
- Requires exhaust system removal for first-time installation only.
- Fits with the centerstand. Fits with SW Motech, Outback Motortek, Hepco and Becker and Altrider Crash bars UPPERS ONLY
- A small modification is required to mount bash plate to adventure sports model. The small bracket attached to the bottom of the crash bars that connect to the genuine skid plate must be removed for clearance. See the additional information link below.
This is one of the gnarliest skid plate made for the KLR. Made from 3/16" aluminum, it is laser cut and CNC formed. All seams are welded on both sides and the entire plate is black texture powder coated. The plate mounts in minutes using stainless steel hardware.
IMPORTANT NOTE: The standard kit will work with all crash bars except for Givi and Happy Trails. Select the Givi option for that brand. This plate will not work with the Happy Trails crash bars.
Select the optional heavy duty mounting brackets if you want to replace the wimpy stock mounts with steel brackets.
This kit provides some much needed protection for both you and your big DR. Handguards and deflectors protect your hands while the skid plate and Case Armor will cover your baby's soft externals.
- Aluminum Handguard Kit in silver for standard 7/8" bars or 1-1/8" oversize bars
- Spacers so you don't have to cut your balls off (your levers that is!)
- Aluminum Skid Plate
- Stainless Steel Case Armor covers for both right and left hand sides
- Plastic Deflectors - Currently only available in SMALL BLACK
Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.
They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.
Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.
Mounting hardware and instructions included.
Note: Will not fit the CRF300L Rally
Droppin’ into the weather? Combine Bushwackers Hand Guards with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls. Essential gear for motorcycles, snow bikes and snowmobiles.
- Cold/wet weather comfort
- Brush, mud and trail protection
- Strap on/off in seconds
- Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors
- Tough stretch polyurethane strap (can be used separately)
- Custom wind foil shapes
- No stitching or pieces to fail
- When not using Bushwackers Hand Guards, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others!
- Made in USA
REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.
Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic
Dimensions (flat): 13.5″ (length from end closest to bar clamp to end closest to bar end) x 16″ (widest part at end of bars) x 6″ (narrowest part nearest center of bar)
The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike. Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.
Features:
- Protects the frame in the maximum friction area
- Use of rubber to increase grip and therefore control of the motorcycle
- Easy assembly and dismantling with expander and plastic bands