Same-day shipping cutoff: Noon Pacific Time

Search Products

Armor - Bike Protection

Skid Plate

TTR125 (E) '00 - '09 TTR125L '00 - '08 TTR125LE '03 - '26
  • Prevents frame stretch and protects engine
  • CAD designed structure
  • Forged for toughness
  • Brushed aluminum finish with BBR logo on both sides
  • All hardware included
  • Bolts on in minutes
  • Prevent the costly replacement or repair of a frame
Ships same business day
$230.95
V-Strom (DL1000) '02 - '26

Constructed of a 4mm-thick aluminum base plate and 3mm-thick side plates for heavy-duty, light-weight protection. Where the base plates and side plates overlap, it forms a riveted 7mm-thick rail for extra rigidity. Base plate includes side protectors that wrap around the engine block to provide both bottom and side protection. 

Installation of the SW-Motech skidplate requires previous installation of the SW-MOTECH crashbars, which are sold separately.

The SW-Motech skidplate is not compatible with Givi or Hepco-Becker crashbars.

The SW-Motech skidplate can be used without a centerstand, or with the SW-Motech, Suzuki or Hepco-Becker* centerstand.

Available in powdercoated black.

Choose Model and Finish
Add Engine Guard / Crash Bar, SW-Motech
Special-order Item: Please allow extra time for delivery.
$284.95

This bash plate is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

  • Fits with  the Genuine Suzuki crash bars
  • Designed only to fit with crash bars. Cannot be mounted without the Genuine suzuki crash bars installed
Choose Color
Please contact us for availability information
$470.95

Handguard

Universal fit. May require additional adjustment or modification.

Droppin’ into the weather? Combine Bushwackers Hand Guards with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls. Essential gear for motorcycles, snow bikes and snowmobiles.

  • Cold/wet weather comfort
  • Brush, mud and trail protection
  • Strap on/off in seconds
  • Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors
  • Tough stretch polyurethane strap (can be used separately)
  • Custom wind foil shapes
  • No stitching or pieces to fail
  • When not using Bushwackers Hand Guards, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others!
  • Made in USA

REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.

Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic
Dimensions (flat): 13.5″ (length from end closest to bar clamp to end closest to bar end) x 16″ (widest part at end of bars) x 6″ (narrowest part nearest center of bar)

Ships in 3-5 business days
$59.95
Universal fit. May require additional adjustment or modification.

The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.

Features

  • High strength and water resistant 1680d Ballistic Nylon construction 
  • Universal easy on/off Velcro snap strap attachment system
  • Reflective Front Strip for High Visibility
  • ¾ Open design provides full coverage of the hand while not impeding controls
  • Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
Ships same business day
$123.95

Radiator & Oil Guard

XR400R '96 - '04 XR250R '96 - '04

Protects the exposed oil line on Honda XR250/400R

Ships in 3-5 business days
$32.95
V-Strom (DL1000) '15 - '15

radiator stone guard is machined from 4mm aluminium 5083 plate. The extra thickness of material provides superior strength and protection against larger debri as well as small rocks etc. Radiator guards can be fitted in approx ½ hr or less using basic tools. All radiator guard mounting hardware is supplied where necessary.

Please contact us for availability information
$205.95

This radiator guard is as beautiful as it is effective. Keep your coolant where it belongs with this laser cut 0.100″thick hunk of 5052 aluminum. It is laser cut, CNC formed and then powder coated black.

This protector mounts to the front of the radiator in mere minutes using the stainless steel hardware that is included with the guard.

Please contact us for availability information
$69.95

Exhaust

Muffler

  • Powercore silencers give your ride a deep works-like tone while providing optimum, dyno-tuned performance
  • Silencer body is constructed of 6061-T6 grade aluminum with machined mounts and a clear anodized finish to bring out the shine
Ships same business day
$199.95
$179.95
XR650L '93 - '26 XR600 '85 - '00

The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.

  • Hard anodized oval shaped aluminum muffler
  • TIG welded reinforced muffler bracket(s)
  • 304 stainless steel mid pipe
  • Red powder coated stainless steel end tip
  • Lighter than stock exhaust system
  • Huge horsepower and torque gains
  • Sleek muffler design allows for maximum clearance
  • Removable screen-type spark arrestor included
  • Handmade in the USA
  • 1 Year Limited Manufacturer’s Warranty
Please contact us for availability information
$373.95

Gasket

KLX300 '21 - '21 KLX230 '20 - '20 KLX230R '20 - '21

Reduce exhaust leaks with this new exhaust gasket. This gasket goes between the header pipe and the cylinder head.

We recommend Anti-Seize on exhaust fasteners.

Add Anti-Seize
Please contact us for availability information
$6.95

Drivetrain, Armor - Bike Protection

Chain, Chain Guard

Yamaha TW200 heavy duty chain guard.  

Made from 3/16" laser cut steel protects stock to oversized rear sprockets.  

This unique design bolts in the OEM location but rests against the rear axle bearing spacer for massive impact resistance.  

 

Ships same business day
$19.95

Engine

Gasket

TTR125 (E) '00 - '09 TTR125L '00 - '08 TTR125LE '03 - '26

A head gasket and base gasket to fit the Big Bore cylinder.

Add Gasket Remover
Ships in 3-5 business days
$26.95
V-Strom (DL650) '04 - '26 SV650 '99 - '26

High quality clutch cover gasket. If you are servicing your clutch, a new gasket will prevent oil leaks.

Select Model
Add Gasket Remover
Ships in 1-2 weeks
$17.95

Oil Filter

SV650 '99 - '15 V-Strom (DL1000) '02 - '26 V-Strom (DL650) '04 - '26
  • Constructed using the best materials available
  • TUV approved and production monitored to ensure OEM or better quality
  • Sold as a package of 5 oil filters
Ships same business day
$35.95
Africa Twin (CRF1000L) '16 - '19 Africa Twin (CRF1000L) Adventure Sport ES '18 - '19

Africa Twin with DTC

  • In addition to the main oil filter, bikes with DTC have an additional oil filter in the clutch circuit
  • Constructed using the best materials available
  • With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world
  • TUV approved and production monitored to ensure OEM or better quality
  • Sold as a package of 5 filters
Ships same business day
$31.95

Clutch

V-Strom (DL1000) '02 - '19 SV1000 '03 - '07
  • Cork-based clutch material impregnated with aluminum particles to increase wear life and heat resistance
  • Highly compressed construction avoids swell and clutch drag
  • Ideal for general-purpose street/sport/touring bikes
  • Kit includes complete engine set of friction plates only
  • For use with manufacturer's recommended drive case oil.
Ships in 3-5 business days
$145.95
DR650 '96 - '26

DP Premium Clutch Kit is engineered to provide superior performance compared to any original equipment manufacturer (OEM) or aftermarket clutch. DPK kits come equipped with friction plates, steel drive plates, and clutch springs, with the exception of those OEM clutches that feature a reusable diaphragm spring.

Each clutch kit is packaged in a foam-lined hard plastic case, ensuring protection of the components prior to installation. This case can also be utilized for the storage and transportation of parts, tools, or other items after the clutch has been installed. The kits are delivered ready for racing, eliminating the need to pre-soak plates in oil.

Designed to promote ultra-smooth power delivery, these kits incorporate exclusive high-heat friction materials that ensure fade-free performance. The friction compounds are specifically formulated for optimal performance in off-road and dual-sport motorcycles, and they are more durable than OEM plates. The steel drive plates are designed not to expand, fade, or contribute to clutch swell, as can occur with stock aluminum plates, and offer an extended lifespan ranging up to 300% more than standard plates.

The increased weight of the steel plates enhances the flywheel effect, aiding in starting and traction without muddying or contaminating the oil.

These clutch springs are precision-wound utilizing high-quality chrome silicone wire. They are heat-treated and shot-peened to maximize longevity, with each spring meticulously designed to prevent slippage while providing robust spring rates that improve the feel and ease of clutch operation. 

Remember to use a new clutch cover gasket during installation.
 

Add Gasket
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after March 2025
$229.95

Drain Plug

DR650 '96 - '26 V-Strom (DL1000) '02 - '26 DR200 '96 - '26 SV1000 '03 - '07

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

14mm Thread

Ships same business day
$22.95

Big Bore

XR650L '93 - '26

The Complete Top End Performance Kit includes:

  • 102.4mm Wiseco piston 9:1 compression (up from 8.3:1) with rings, wrist pin and circlips
  • Stage 1 camshaft for more power
  • Top end gasket set

This kit boosts your displacement from 644cc to 675cc. Your cylinder must be bored to fit the larger piston.

Ships in 3-5 business days
$489.95

Controls

Cable

DR650 '96 - '26

A quality OEM replacement clutch cable.

Add Cable Lubricant
Ships same business day
$39.95

Levers

DR650 '90 - '26

Replace the soft stock lever with sturdy forged aluminum.

Folding tip prevents snagging.

Hardened splines won't slip or rotate.

Ships same business day
$31.95
Africa Twin (CRF1100L) '20 - '26 Africa Twin (CRF1100L) Adventure Sport ES '20 - '26

Quality genuine Honda replacement levers. Standard length.

Choose Lever
Please contact us for availability information
$58.95
Africa Twin (CRF1000L) '16 - '19

CNC Machined high quality aluminum folding levers.

Lever folds outward to prevent breakage in the event of a crash.

Automatic lever position restoration provides quick recovery from the crash.

Ultra precision machine cut for super light weight construction, high precision and quality.

Available in 4 finger lever length to fit your riding style.

Made of durable aluminum for extreme strength. Titanium color anodized finish.

Sold Individually

Choose Lever
Please contact us for availability information
$54.95
CB500X '13 - '26
  • Lightweight levers are CNC-machined from aluminum
  • Reach to the lever is adjustable to six positions
Ships in 3-5 business days
$79.95

Body

Windscreen

Versys-X 300 ABS '17 - '26

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • Black hardened acrylic base plate and mounting hardware
  • A set of MadStad adjustable brackets
  • Rear support brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.

Please contact us for availability information
$259.95

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • Black hardened acrylic base plate and mounting hardware
  • A set of MadStad adjustable brackets
  • Rear support brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield. 

The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.

Please contact us for availability information
$279.95
Africa Twin (CRF1100L) Adventure Sport ES '20 - '23

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • Black hardened acrylic base plate and mounting hardware
  • A set of MadStad adjustable brackets
  • Rear support brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.

Does not fit the Standard Africa Twin 1100, only fits Adventure Sport.

Please contact us for availability information
$299.95

Transform your ride.  MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • A set of Madstad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield
  • Pair of acrylic side deflectors
  • All required mounting hardware

The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.

Please contact us for availability information
$289.95

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • A set of Madstad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield
  • Pair of acrylic side deflectors
  • All required mounting hardware 

The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.

Please contact us for availability information
$299.95

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • A set of Madstad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield
  • Pair of acrylic side deflectors
  • All required mounting hardware

The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.

Please contact us for availability information
$289.95
Africa Twin (CRF1000L) '16 - '19 Africa Twin (CRF1000L) Adventure Sport ES '18 - '19

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • Black hardened acrylic base plate and mounting hardware
  • A set of MadStad adjustable brackets
  • Rear support brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.

Please contact us for availability information
$279.95
V-Strom (DL650) '17 - '26

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

  • A set of MadStad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield (frosted bottom to soften headlight reflection)

Their adjustable brackets bolt to the factory windshield mounting plates, then their custom shield attaches to their brackets. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set it for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection. In addition, their shield is 18" across at its widest point versus 14" for the stock shield, so you will have a wider pocket of wind protection as well.

NOTE: You will NOT be able to use your stock windshield with our adjustable brackets.

Please contact us for availability information
$219.95
V-Strom (DL650) '12 - '16

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • A set of MadStad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The windshield bolts to their brackets out in front of your dashboard. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection.

Riding is believing. With the windshield separated from the fairing riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. Most customers have found that they can actually get better wind protection with their smaller adjustable shield rather than a larger fixed one. You don't have to compromise wind protection to enjoy the open-air motorcycling experience!

Please contact us for availability information
$219.95

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • Black hardened acrylic base plate and mounting hardware
  • A set of MadStad adjustable brackets
  • Rear support brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.

Please contact us for availability information
$279.95

Transform your ride. Get that pressure off of your face and chest! MadStad's quick-release mounting system gives you touring comfort on your naked bike. Adjust the height and angle of our windshield to dial in smooth airflow and a more comfortable ride while still looking over the shield. You can switch back to naked bike in seconds, without tools, however you will be so much more comfortable you may not want to!

What's included in the kit:
Their complete drop-in quick-release system is custom-made for the SV650 and includes everything needed to mount and position the shield. Your bike will not require any modification. Here are the system components:

  • Fork-mount quick release brackets
  • Adjustable shield brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield.
  • Solid aluminum 7/8" crossbar

The quick-release base brackets mount to your forks. The adjustable shield brackets lock onto the base and with the shield system attached you can adjust it for the optimum height, angle and airflow to dial in the comfort for your particular height and riding position. They included a long 7/8" crossbar both for stability and so you can mount your smartphone or GPS unit up higher front-and-center where you can more easily see it.

If you want to go back to stock naked bike configuration simply release the locking plungers and slide the system off. Keep in mind that the crossbar, and anything you may have mounted to it, will also come off with the system.

Please contact us for availability information
$279.95
V-Strom (DL1000) '02 - '03

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • Black aluminum mounting plate (replaces the stock windshield)
  • A set of MadStad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The custom shield bolts to the brackets out in front of your instrument cluster. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection.

Riding is believing. With the windshield separated from the fairing riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. Most customers have found that they can actually get better wind protection with our smaller adjustable shield rather than a larger fixed one. You don't have to compromise wind protection to enjoy the open-air motorcycling experience!

Please contact us for availability information
$269.95
V-Strom (DL1000) '04 - '13

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

  • A set of MadStad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The custom shield bolts to the brackets out in front of your instrument cluster. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection.

Riding is believing. With the windshield separated from the fairing riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. Most customers have found that they can actually get better wind protection with our smaller adjustable shield rather than a larger fixed one. You don't have to compromise wind protection to enjoy the open-air motorcycling experience!

Please contact us for availability information
$219.95
V-Strom (DL1000) '14 - '16

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

  • A set of MadStad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The custom shield bolts to the brackets out in front of your instrument cluster. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection.

Riding is believing. With the windshield separated from the fairing riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. Most customers have found that they can actually get better wind protection with our smaller adjustable shield rather than a larger fixed one. You don't have to compromise wind protection to enjoy the open-air motorcycling experience!

Please contact us for availability information
$219.95
V-Strom (DL1000) '17 - '26

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

  • A set of MadStad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield (frosted bottom to soften headlight reflection)

Their adjustable brackets bolt to the factory windshield mounting plates, then their custom shield attaches to their brackets. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set it for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection. In addition, our shield is 18" across at its widest point versus 14" for the stock shield, so you will have a wider pocket of wind protection as well.

NOTE: You will NOT be able to use your stock windshield with our adjustable brackets.

Please contact us for availability information
$219.95
V-Strom (DL650) '04 - '11

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

  • A set of MadStad adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The custom shield bolts to the brackets out in front of your instrument cluster. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection.

Please contact us for availability information
$219.95

Lighting

Tail Light

There is a lot of technology packed into this tail light/fender eliminator kit. You have programmable turn signals and Safety Brake Pulsing both built into this product.

You can enable or disable the safety brake pulsing feature.
This kit includes only the highest quality components, including the pre-installed 12oClockLabs processor board, which is made in the USA.

  • Plug and Play
  • 7 Different Programmable Turn Signal Patterns
  • Safety Brake pulsing built in (Can Enable or Disable)
  • Superbright LED's; For excellent brightness, even in direct sunlight
  • License Plate Light built in
  • License Plate Bracket fits the common USA license plates, sloted for maximum plate compatibility.
  • Includes Mounting Hardware
  • Saves about 2 lbs over the factory tail light setup
  • Made In the USA

We recommend a "Fixed Rate Flasher" unit for use with this kit. When you install aftermarket signals it changes the load on a factory signal system.

This kit does not include parts to mount aftermarket turn signals. The pre-installed processor board allows the turn signals to be integrated in to the tail light.

Add Turn Signal Flasher
Please contact us for availability information
$179.95

There is a lot of technology packed into this tail light/fender eliminator kit. You have programmable turn signals and Safety Brake Pulsing both built into this product.

You can enable or disable the safety brake pulsing feature.
This kit includes only the highest quality components, including the pre-installed 12oClockLabs processor board, which is made in the USA.

  • Plug and Play
  • 7 Different Programmable Turn Signal Patterns 
  • Safety Brake pulsing built in (Can Enable or Disable)
  • Superbright LED's; For excellent brightness, even in direct sunlight
  • License Plate Light built in
  • License Plate Bracket fits the common USA license plates, sloted for maximum plate compatibility.
  • Includes Mounting Hardware
  • Saves about 2 lbs over the factory tail light setup
  • Made In the USA

We recommend a "Fixed Rate Flasher" unit for use with this kit. When you install aftermarket signals it changes the load on a factory signal system.

This kit does not include parts to mount aftermarket turn signals. The pre-installed processor board allows the turn signals to be integrated in to the tail light.

Please Note: If you plan on removing any of the OEM Honda turn signals, make sure to get the Fixed Rate Flasher. The Honda OEM flasher relay will ONLY work correctly with ALL Honda LED signals, once you remove any Honda OEM signals; the Honda OEM flasher relay no longer operates correctly.

Add Turn Signal Flasher
Please contact us for availability information
$179.95

Headlight, Turn Signal

Universal fit. May require additional adjustment or modification.

Headlight is DOT approved. Has both high and low beams. Attaches to the upper fork tubes with rubber straps. Turn signals are embedded in the headlight housing.

  Integrated turn signals may require resistors to flash correctly.

Add Resistor Kit
Ships in 3-5 business days
$89.95

Auxiliary Lights

Universal fit. May require additional adjustment or modification.

10-Watt LED
The Solstice Solo LED Pod light outputs 1,052 raw lumens from a single 10-Watt LED and outshines most factory halogen headlights. Vision X uses top-binned LEDs, guaranteeing that you’ll have the most lumen output your dollar can buy.

Compact Form
All those raw lumens come out of a housing that is only 2″ wide. Featuring a singe-bolt mounting system, you’ll be able to take the Solstice Solo Prime anywhere, anytime.

The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with other Solstice Solo pods. Includes stainless steel mounting bracket and waterproof connection. Choose narrow 10°, medium 30°, or wide 60° light beam pattern. 

Sold each.

Beam10°
HousingBlack
Raw Lumens1,052 lm
Effective Lumens736 lm
Weight0.76 lb
Input Volts9-48V
Watts10
Amp Draw0.83A
Add RAM Light Mounts
Ships in 3-5 business days
$139.95

Auxiliary Lights, Mount

V-Strom (DL1000) '02 - '12 V-Strom (DL650) '04 - '11

This auxiliary light bar is laser-cut from mild steel and powdercoated black for exceptional looks. The holes on each end of the bar are 3/8" and should not be made any larger for strength reasons.

The bar is very easy to install, just remove two plastic "pop" connectors and install the bar with two bolts with clips. All hardware and instructions are included.

Special-order Item: Please allow extra time for delivery.
$53.95

Tail Light, Mount

This is a simple three piece kit you can install in minutes that cleans up the stock DR rear-end. 

We use the DR250 taillight that fits perfectly into the pocket of the stock taillight on the DR650 fender. It is smaller, looks great and is out of harms way more than the stock unit. It is a total 'plug-n-play' as the wire pigtail plugs right into the DR650 harness just like stock. 

Then we use a small LED light to keep you legal and illuminate your license plate, which gets mounted to our custom stainless steel bracket that is powder coated black, eliminating the stock ugly plastic mount.

Kit includes:

  • Black Powder Coated Stainless Steel License Plate Bracket
  • 250 Taillight/Brake Light Lens
  • LED License Plate Light
Ships same business day
$148.95

Seats

Foam & Cover Kit

DR250 '82 - '88 DR250S '90 - '92 DR250SE '93 - '97 DR350 '90 - '99 DR350S '90 - '96 DR350SE '94 - '99

Recover that shredded or faded stock seat cover with this Moose Racing cover. 

This is only the cover material. Designed to fit over your stock seat pan and foam. 

Strong marine-grade vinyl that's made to last. UV protected from sunlight for extended use and has double stitching for extra strength.

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

Add Kit
Ships in 3-5 business days
$39.95

Complete Seat

V-Strom (DL650) '04 - '11 V-Strom (DL1000) '02 - '13

State-of-the-art replacement seats, Sargent seats are built on a percision-molded lightweight Polytec seat pan. Sargent's proprietary seat foam (Super Cell Atomic Foam) is their own unique blend of resilience, firmness, and vibration-absorption qualities, making it well suited for long distance comfort and support. Sargent seats are covered in a marine-grade, UV-stablized mildew resistant CarbonFX vinyl. 

Choose Model and Year
Ships in 3-5 business days
$559.95

Featured Products, Brakes

Rotor

The Warp9 oversized front brake rotor kit for the TW200 has amazing brake Performance. This high quality oversized rotor is laser-cut from high-carbon content 410 stainless steel then lap cross hatch ground and heat-treated. Finally, high-temp paint is applied to surfaces like cooling holes and edges to provide a clean, finished look.

*Add the Galfer steel braided brake line for the ultimate braking performance.

Add New Rotor Bolts
Ships same business day
$179.95

Drivetrain, Engine

Counter shaft seals can wear out over time. Replace it with a genuine Yamaha counter shaft oil seal.

Ships in 3-5 business days
$11.95

Electrical

Stators, Lighting & High Output

Also known as the pickup, trigger coil or pulser. This is a known weakness on the DR650. When it fails there is no spark, weak spark or the spark timing is thrown way off. This is a high quality replacement pulse coil. It has the correct polarity and color coded wires. Small and light enough to carry as a spare.

Add Gasket - Stator Cover
Ships same business day
$77.95
WR250R '08 - '20 WR250X '08 - '11

The WR Speedo is driven by the motor and is inaccurate up to 10% in the stock configuration. Change your gearing and it gets worse. This speedo calibration device is the smallest in the world and has the widest calibration range available. It has a simple plug and play installation that you do have to program, but easily done just using your current gearing. Change your gearing, easy to change your speedometer.

Other beneficial features include:

  • Saves max speed, which can be recalled to your stock speedometer gauge
  • Built in testing mode to ensure proper installation
  • Works for vehicles which display MPH or KPH
  • Ability to convert MPH to KPH, or KPH to MPH
  • Ratio based correction in 0.1% steps, up to 99.9% + or -
  • Weather proof design to protect against the elements
  • 18" wiring harness (1.5 ft.)
  • 3 year product replacement warranty
  • Made in the USA!
Ships in 1-2 weeks
$79.95
CB500X '13 - '20 CRF250L '12 - '20 CRF250L Rally '17 - '20 CRF300L '21 - '22 CRF300L Rally '21 - '22 WR250R '07 - '20 WR250X '07 - '11 V-Strom (DL650) '04 - '20 V-Strom (DL1000) '02 - '19
  • Easy install, no wire cutting or wire tools required.
  • Works for any speed transmission, up to 9 gears.
  • 14 Superbright LED's for excellent direct sunlight visibility.
  • Auto-dimming for great night time visibility.
  • Over 200 automatic diming levels to compensate for any ambient light condition.
  • Automatic learning mode for easy gear teaching setup.
  • Fast internal processing for immediate gear detection and display.
  • Compact 20mm x 20mm x 13mm size.
  • 3 year product warranty.
  • Made in the USA.
  • Also fits other motorcycles, see requirements below.

GPI-G04 Requirements: 
1. SPEED sensor signal coming from VSS Speed Sensor or ECU. 
2. TACH signal coming from ECU, Crank Position Sensor, or Cam Position Sensor.

Please contact us for availability information
$99.95

Drivetrain

Bolt Kit, Retainer

Sprocket

Quality steel sprockets and EK SROZ2 525 O-Ring chain. Available in gear ratio choices from - 13/42 to 15/46. EK SROZ2 525 chains come in 120 link length and may have to be cut down to fit. They also come with rivet type master links. Clip type links are available below.

  13 and 14 Tooth sprockets require a smaller retainer

Add SS C/S Sprocket Retainer
Ships same business day
$149.95
XT225 '92 - '07
  • Stock gearing uses a 15 tooth sprocket
  • Use a 13 tooth sprocket for REALLY low off-road gearing
  • Use a 14 tooth sprocket for off-road performance
  • A 16 tooth sprocket will give you lower RPM at highway or street speeds
Ships in 3-5 business days
$21.95

Wheels

Speedo

Did you go to an electronic speedo? SM Wheels? Something where you don't need the stock speedo drive? Then you need this to make up for that lost space and protect the bearings.

Ships same business day
$49.95

Bearings

SV650 '99 - '02

Rear wheel bearing kit. Includes a new dust seal and the bearing and seal for the cush drive hub. All bearings are sealed on both sides.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Kit Contents
DescriptionQTY per Kit
Ball Bearing3
Seal2
Choose Year
Ships in 3-5 business days
$36.95

Complete set of 'Adventure' wheels. These are the same rim sizes as used by the BMW GS and other big adventure bikes. The 19" front and wide 17" rear will give you great twisty road handling on the pavement while still being dual-sport friendly.

We start with Silver Excel or Sun rims, Warp 9 billet hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • Warp 9 hubs with bearings and seals installed
  • Excel 2.5" or Sun 2.75" x 19" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
  • Optional OEM Kawasaki hubs are available
  • Optional color matched billet sprocket carrier is available

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Custom made:
Please allow 2-3 weeks for delivery.
Cannot be canceled.
$1,549.00
990 Adventure '07 - '13 950 Adventure '03 - '06

Complete set of 'Adventure' wheels. These are the same rim sizes as used by the BMW GS and other big adventure bikes. The 19" front and wide 17" rear will give you great twisty road handling on the pavement while still being dual-sport friendly.

We start with Silver Excel or Sun rims, OEM KTM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • OEM KTM hubs with bearings and seals installed
  • Excel 2.5" or Sun 2.75" x 19" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
  • Optional Warp 9 billet hubs are available in several colors
  • Optional color matched billet sprocket carrier is available

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Custom made:
Please allow 2-3 weeks for delivery.
Cannot be canceled.
$1,549.00
990 Adventure '07 - '13 950 Adventure '03 - '06

We start with a silver Excel or Sun rim and an OEM hub, then tie them together with Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.

  • New OEM hub with bearings, spacers and seals installed
  • Excel or Sun rim
  • Sun rims available in silver, black or gold
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.

Choose Wheel Size
Custom made:
Please allow 2-3 weeks for delivery.
Cannot be canceled.
$799.00

We start with Silver Excel or Sun rims, Warp 9 billet hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • Warp 9 hubs with bearings and seals installed
  • Excel or Sun 3.5" x 17" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
  • Optional OEM Kawasaki hubs are available
  • Optional color matched billet sprocket carrier is available

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Custom made:
Please allow 2-3 weeks for delivery.
Cannot be canceled.
$1,549.00

Luggage

Tank Bags

Universal fit. May require additional adjustment or modification.

Keep smaller essential items such as keys, camera, phone, tools, etc easily accessible with the OBR ADV Gear Switchback Tank Bag. The OBR ADV Gear Switchback Tank Bag attaches/secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable strap at the front. A great solution for adding storage without interfering with rider position.

New Design! The top mesh pocket now has a zipper closure!

Features

  • High strength and water resistant 1680d ballistic nylon construction
  • Spacious 5.5" x 7" x 2.5" main compartment with zippered top mesh pocket
  • Heavy duty #8 and #10 coil zippers that won’t jam up in the dust
  • Full coverage storm flap over main compartment zipper
  • Radiused front profile to interface with riders legs
  • Secure attachment through bikes frame/sub frame utilizing supplied adjustable buckle straps
Ships same business day
$79.95

Luggage Racks

V-Strom (DL1000) '14 - '18 V-Strom (DL650) '17 - '18

This luggage rack is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.

All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

Luggage plates will come with pre-drilled holes to suit rotopax mount. On request luggage plates can be pre-drilled to suit Givi top case mounting hardware.

DIMENSIONS

  • Total Length: Approx 33cm
  • Total Width: Approx 33cm closest to seat, approx 27cm at rear
Choose FInish
Please contact us for availability information
$137.95

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF450L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

  • Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
  • Holes are in place to accept Rotopax mount with no drilling required.
  • Stainless steel mounting hardware and instructions included.
  • Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
  • Weighs 3 lbs, 10 inches wide, 12 inches long.
  • Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
  • Rear rack only, no Rotopax mount or side racks included.
Ships same business day
$109.95
Universal fit. May require additional adjustment or modification.

The Scramble Rack is optimized for carrying luggage on the sides. The side straps provide plenty of mount points and the spacing is MOLLE compatible. The top mounting surface on the Scramble Rack is minimal and designed for small packs.

There are two versions of this rack.

  • Enduro - Attaches in the rear with fender hooks.
  • Street - Utilizes a girth hitch in the rear. Works great with grab handles.

CONSTRUCTION FEATURES:

  • 1 Heavy Duty Metal Rings
  • 1" Heavy Duty Nylon Webbing
  • Daisy loops along sides and rack surface
  • 2 Heavy Duty Cam Tension Loops
  • 1 pair of NRS Cam Buckle Bumpers
  • Enduro model uses vinyl coated fender hooks in the rear.
  • Street model uses girth hitched side straps around the grab handles.

THINGS YOU SHOULD KNOW:

  • They recommend their Bag Snake Kit for rigging side bags.
  • Check to see if you need an Exhaust Shield.
  • Dry bags NOT included.
  • Fuel bottles and holsters NOT included.

Patent Pending

Add Bottle Holster
Ships in 1-2 weeks
$59.95
DR350SE '94 - '99 DR350S '90 - '93 DR350 '90 - '99

CNC laser cut from 1/8" aluminum with a large 12.5" (length) x 10" (width) mounting surface area. Quick installation with a 4 point mounting system and no modifications required. There are integrated turn signal mounts, along with multiple strap slots for securing gear bags and cargo. All hardware and instructions are included.

The Rack is compatible with all RotoPax mounts.

You may purchase the rack alone, or you can order the Rack with the RotoPax.

Add Rotopax Containers
Add Container Mount
Add Extension Mount
Ships same business day
$104.95

Duffel Bags, Backpack

Universal fit. May require additional adjustment or modification.
  • Lifetime Warranty
  • 100% waterproof with electronically heat welded seams
  • Made from durable UV Coated 24 oz. PVC Tarpaulin
  • Watertight roll closure with quick release buckles
  • Padded back panel conceals backpack straps when using as a tail pack
  • Securely mounts using 4 NEW RIGG STRAP™ system 
  • Purge valve makes for easy compression  
  • Front MOLLE panel includes a clear waterproof document pocket
  • Integrated external pocket to hold optional hydration bladder (CL-HYDRO-S not included)
  • 1 side bottle pocket large enough to hold 30 oz. fuel bottles (Bottles not included)
  • Backpack straps are adjustable and padded for comfort
  • Dimensions: 12.5”L x 7”W x 21.5”H
  • Holds approx. 30 liters
Ships same business day
$169.95

Tires, Tools

Tire Tools, Wheel & Tire

Universal fit. May require additional adjustment or modification.

This "pencil style" tire gauge has a brass head and a plated brass body.

90° angle allows for easy access to valve stems and easy reading.

5 to 50 psi measurement in one pound increments.

Very accurate.

Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

MotoPressor Tire Gauge comes with two chucks. A straight chuck for "easy to get at" valve stems PLUS a 45° chuck for those "not so easy to get at" valve stems. 

We all know what a pain fuel Station gauges are. Most are woefully inaccurate and impossible to get onto a motorcycle valve stem. Enter the MotoPressor Tire Gauge…simply attach the MotoPressor Tire Gauge to your valve stem, attach the fuel station chuck to the inline fitting on the gauge and get an instant and accurate reading in PSI or KPA. 

No need to switch between the gauge and air compressor hose! Added a little too much air to your tire? Simply press the air bleed button and adjust to your desired pressure. 

NOTE: When swapping out the chuck, use plumbers tape on the hose thread. Wrap the thread, in a clockwise direction with 3 - 5 wraps of plumbers tape. Screw on the new chuck and tighten. Failure to follow these instructions will result in air leak! 

MotoPressor Tire Gauge comes with a one year limited product warranty. 

Specifications: 

  • Measures PSI or KPA 
  • 0-60 PSI/0-4.2 KPA read out 
  • 50mm (2”) analogue dial 
  • 300mm (12”) Braided flex hose 
  • Push button air bleed valve 
  • Protective rubber gauge guard 
  • Self-locking air chuck PLUS A SECOND 45° chuck for those hard to get to, valves 
  • Can be used in-line with a compressor
Ships same business day
$29.95

Brakes

Caliper Rebuild Kit

KLX140(R) '08 - '26 KLX140L(RL) '08 - '26 KLX250S '08 - '20 KLX230 '20 - '20 KLX230R '20 - '20 KLX300 '20 - '26 DR350 '90 - '99 DR250 '90 - '93 XR250R '86 - '87 KLX300R '21 - '26 KLR650 '08 - '18

Repair kit for your front disc brake caliper.

Add Brake Fluid
Ships in 3-5 business days
$27.95

Master Cylinder Rebuild Kit

CB500X '13 - '18 Africa Twin (CRF1100L) '20 - '26 Africa Twin (CRF1000L) '16 - '19
  • Kits contain all parts needed to re-seal leaking master cylinders
  • Includes cup seals, copper washers, o-rings and spring, and clips where applicable
Ships in 3-5 business days
$24.95

Fuel and Intake

EFI Controllers

CRF250L '17 - '20 CRF250L Rally '17 - '20

Tried, true and tested the Power Commander continues to evolve with the Power Commander 6.  Developed to simplify the user experience, PC6 makes choosing and tuning a map easier for the end user.  All the same benefits you have relied on for over 20 years remain to keep you at the front of the pack. 

The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely.  With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.

Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock.  With the ability to store and switch between two maps on-the-fly  (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune, Quickshifter or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.

All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device. This BASE map can be any of the available maps from the Dynojet website, or those you may have received from a third party.

Please contact us for availability information
$527.95

Choke

Hate the handlebar mounted choke lever? Can't reach the choke knob? Does your Safari or IMS tank make using the choke difficult?

Our adjustable cable operated choke knob mounts to the left side engine case and works for either the stock BST or Mikuni TM40.

Ships same business day
$53.95

Engine, Tools

Engine & Maintenance

CRF450L '19 - '26 CRF450R '17 - '26 CRF450X '19 - '26
  • A quick, simple, no mess solution to oil changes
  • CNC'd 6061 T-6 aluminum adaptor body
  • Knurled grip and Buna O-ring for tool free sealing
  • High-temp Silicone hose
  • Ergonomic start/stop clamp
  • End caps protect threads and provide clean storage
  • Engineered, manufactured and assembled in the USA
Ships in 3-5 business days
$46.95

Clutch, Engine & Maintenance

Universal fit. May require additional adjustment or modification.

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

  • Features 8mm spanner pins
  • Jaws open up to 5 inches wide
  • Recommended for square tooth style clutch hubs
  • Not recommended for v-groove or half round style clutch hubs
Ships same business day
$32.95

Frame

Footpegs

V-Strom (DL650) '04 - '16 V-Strom (DL1000) '14 - '16

These pegs from SW Motech are a very cost effective way of getting a much larger footpeg than stock under your feet (2" by 3"). The removable and replaceable rubber cover is a another great feature. It helps isolate vibrations through your feet on those long highway jaunts but you can remove it in a few minutes when you get into slippery conditions that require better traction. Last but not least, you can change position a full 15mm. Two mount holes where the peg bolts to the mount allow that much adjustability. Entire peg mounts right up to your stock frame foot peg mount, no modifications necessary.

The pegs are made out of stainless steel and attach to a CNC machined aluminum bracket that goes into your stock mounts on your DL. These can replace your worn out stock pegs, give you a rubber peg when needed and a serrated edge when needed and look great doing it, what more could you ask for?

Ships in 3-5 business days
$159.95
Universal fit. May require additional adjustment or modification.

Not your average rubber insert! These rubber covers go over the top of your MK3 or MK4 Pivot Pegz so that the aggressive teeth are only exposed when you need them in muddy conditions.

  • Unique, innovative design
  • Wide flat platform
  • Openings allow mud/dirt to pass through
  • Easy and quick to get on/off
  • Good grip
  • Reduced vibration
  • Extra comfort

Important to verify which style Pivot Pegz you have before ordering.

Choose Peg Style
Ships in 3-5 business days
$29.95
TTR125 (E) '00 - '09 DR650 '96 - '26 DR350S '90 - '93 DR350SE '94 - '99 DR350 '90 - '99 XT250 '08 - '26 KLX125 '10 - '16 TTR125L '00 - '08 TTR125LE '03 - '26

Light weight and strong. These DRC foot pegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.

Ships same business day
$59.95
YZ125 '99 - '26 YZ250 '99 - '26

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Please contact us for availability information
$118.95

Communications & Nav

GPS

V-Strom (DL1000) '02 - '12 V-Strom (DL650) '04 - '11

The Strombone is the perfect solution for mounting a GPS unit to your V-Strom DL650 or DL1000. Designed for use with RAM Mounts mounting products (sold separately).

Manufactured from CNC machined 3/8" aluminum, it provides a stable platform and convenient location for your GPS unit, iPod, iPhone, Cell Phone, Camera or other electronic device with a 1" RAM Mount Ball.

Ships same business day
$29.95

Electrical, Communications & Nav

V-Strom (DL1000) '02 - '12 V-Strom (DL650) '04 - '11

A handy shelf laser cut from 16 gauge steel to mount your radar detector, switches or other small accessories for easy viewing access. Does not interfere with the riders view of the instrument panel and in fact does double duty as a shield to keep damaging UV rays off the plastic instrument panel.

This shelf is black powder coated for a clean look and additional durability. Mounts simply to stock or MadStad Bracket and compatible with all wind screens.

Ships same business day
$35.95

Gas Tanks

Accessories

V-Strom (DL1000) '14 - '26

TechSpec's line of motorcycle tank grip pads will help you improve the relationship between you and your machine! The ability to squeeze the tank and feel a solid seat position is very comforting. Hard braking maneuvers no longer send you into the tank.

The Snake Skin material is their 'Premier Product' at just .125" thin. This precut kit includes three pieces: right & left tank grips and a center tank piece.

Choose Model and Year
Please contact us for availability information
$74.95
KLR650 '87 - '18

6.6 gallons just not enough? Here is your answer, the 10 gallon tank from IMS. This tank is so large that they installed an internal lift pump to use the full capacity of the tank while maintaining a lower center of gravity than the OEM tank.

Can use factory locking cap or IMS screw on cap. Wing Tank - Does Not Use OEM/Stock Shrouds

Choose Type / Color
Please contact us for availability information
$680.95

Suspension

Forks

V-Strom (DL1000) '02 - '12

Progressive springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. These springs are significantly stiffer than the wimpy stock springs.

They will make a big improvement in the front forks while still delivering a smooth ride. Sold in pairs.

Ships in 3-5 business days
$111.95
KLX140(R) '08 - '26 KLX140L(RL) '08 - '26 KLX140G(RF) '17 - '26

Included in this kit are 0.43 kg/mm Race Tech straight rate fork springs, Cogent DDC (Drop in Damper Cartridge) performance cartridges and two bottles of 5w fork oil.

Due to the small diameter of the KLX140 fork springs, the DDC Installation Tool will not work in the normal way on these bikes.

Add Ratio Rite
Ships same business day
$349.95

Fork Cartridge Dampers

Damping Rod style forks are notorious for being too harsh, too mushy and too easy to bottom. Gold Valve Cartridge Emulators remedy this problem by controlling the compression damping with a tuneable valve. The Emulator sits on top of the damping rod and is held in place by the main spring.

Simply put; Emulators make damping rod forks perform like well-tuned cartridge forks. Installation and tuning for any condition or rider preference is very straight-forward. 

Simple to install and completely tunable for all conditions and rider preferences.

Choose Year
Ships in 3-5 business days
$199.95

Damping Rod style forks are notorious for being too harsh, too mushy and too easy to bottom. Gold Valve Cartridge Emulators remedy this problem by controlling the compression damping with a tuneable valve. The Emulator sits on top of the damping rod and is held in place by the main spring.

Simply put; Emulators make damping rod forks perform like well-tuned cartridge forks. Installation and tuning for any condition or rider preference is very straight-forward. 

Simple to install and completely tunable for all conditions and rider preferences.

*Comes with RaceTech adapter to properly seat the Gold Valve cartridge into to the top of the damper rod.

Add Oil Level Gauge
Ships in 3-5 business days
$229.95

Fork Seals & Bushings

SV650 '99 - '02

High quality OEM replacement fork seals.

Sold in pairs.

Choose Year
Ships in 3-5 business days
$14.95

Chemicals, $25 and Under

Universal fit. May require additional adjustment or modification.

Stabilizes gas for short and long term periods of inactivity (up to two years) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. 8 oz bottle treats 48 gallons of fuel.

  • Cures and prevents ethanol fuel problems
  • Helps prevent phase separation
  • Makes engines start easily, run smooth
Ships same business day
$8.95

Filter Oil & Cleaner

Wheels, Tools

Wheel & Tire

Universal fit. May require additional adjustment or modification.

Convenient professional grade spoke wrench, a great addition to any tool pouch.

  • Knurled nonslip aluminum handle
  • Includes 6.8mm tip
  • Quick release ball detent tips allows for quick changes to other optional sizes

Recommended for use with Warp 9 wheels. Please measure nipple size to ensure proper fit.

Ships same business day
$12.95

Tools

Wheel & Tire

Engine, Tools, $25 and Under

Engine & Maintenance

XR650L '93 - '26

Two feeler gauges on a single tool. Angled to make checking the clearances easier.

Stock valve clearances are .004" intake and .005" exhaust (.10mm int. and .13mm exh.)

Backordered: Waiting for stock from suppliers to fulfill orders placed on or after March 2024
$7.95

Tires

Dual-Sport

VanVan 200 '17 - '26 TW200 '87 - '26

The VanVan and the TW200 OEM style Dual-Sport Knobby Tires that are DOT approved.

The front tire is a 130/80-18 while the rear is a 180/80-14

Ships in 3-5 business days
$179.95

Supermoto

Universal fit. May require additional adjustment or modification.

A Radial tire specifically designed for small displacement sport bikes. Advanced belt design and Jointless Band (JLB) rear tire construction utilizes a continuously wound belt for smooth performance and a consistent tire contact patch. Aggressive sport-derived treat pattern for enhanced on-bike appearance.

These tires are all tubeless and H-rated (max speed of 130 mph)

Ships in 3-5 business days
$111.95

Armor - Bike Protection, Featured Products

Radiator & Oil Guard

This DR650 Oil Filter Guard is CNC machined from solid 6061 aluminum, black anodized, and then custom laser etched with our logo.

It fits over the fragile OEM magnesium cover and provides great impact protection in the event of a tip over.  Proudly made in the USA. 

Ships same business day
$69.95

Luggage, Gas Tanks

Fuel Storage

Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

This unique design adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Ships same business day
$62.95

Accessories

Universal fit. May require additional adjustment or modification.

These clever tie-down clamps give you an instant anchor point for tie-down straps using your hand grips.

  • Oval opening for single or double tie-down hooks
  • Clamps securely to any 7/8" handle bar grips
  • Machined from forged aluminum
  • Sold in pairs
Ships in 3-5 business days
$58.95