Search Products

Genuine Kawasaki Rear Sprocket.  Size 57T

• Computer-designed to achieve ultimate strength at minimum weight
• JT combines leading-edge technology with top materials to produce the ultimate quality sprocket range with unbeatable value
• Every sprocket meets or exceeds the highest possible quality standards set for the motorcycle industry
• Sprockets are heat-treated and bead-blasted to reduce material surface tension
• Unless noted, front sprockets are made with C45 steel and SCM415 chromoly steel alloy; rear sprockets made with top-quality-grade C45 high-carbon steel

Available for stock gearing, 49 tooth rear sprocket

OEM Honda rear sprocket for the XR150L

Reduce the friction dragging down your drivetrain.  This chain roller is made from Delrin®, it's self-lubricating and a significant improvement over stock. 

Does not use a bearing but rides directly on the frame boss. There is no mounting hardware included.

Aircraft aluminum withstands hard hits from logs and rocks. All mounting hardware and wear blocks included.

Genuine Keihin spring, washer, and oring for the fuel screw of FCR and FCR MX carbs.

Just the parts…
Fuel screw spring, washer, o-ring (fuel screw not included)

Genuine Honda replacement air filter.

Hiflofiltro air filters are manufactured to fit the factory air box and are a direct replacement for original equipment filters. 

Top quality powerflow filtering media, developed for modern high performance engines.

• Designed to fit in the factory air box exactly like original filter
• The best selling replacement air filter for competition motorcycles and ATVs
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

• Designed to fit in the factory air box exactly like original filter
• The best selling replacement air filter for competition motorcycles and ATVs
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

Replacement rubber boot for choke knob assembly.

These Mikuni carburetors are correctly sized and easily fitted to your Honda XR600 and XR650L stock motor mounting flange after removing the locator tags and also match the air box when using the silver anodized air-box adapter. This adapter is fitted prior to delivery when purchasing complete kits. For this Mikuni carburetor to operate correctly the motorcycles air box must be opened up to allow more air flow in. Using a hole saw, a 45mm diameter hole will be sufficient for a Suzuki DR650 but some Honda’s require way more. The best process is to keep opening up the air-box until no more improvement is noticed and you will be surprised at the difference. The kit also comes with throttle cables and a 1/4 turn quick action throttle which must be lubed before fitment. The carb comes with a couple of  Honda specific adjustments made and pre jetted for your engine. A specially made size 30 pump nozzle is fitted as the accelerator pump circuit on TM42 carbs will not work properly on Honda’s or Kawasaki’s without it.

Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For this reason, we have included what we have found to be a range of jets to allow you to tune to most variables.

This carb fits with most aftermarket large capacity tanks.  Some larger capacity tanks do not allow the fitment of this carb without modification. A competent person can easily heat and depress the contact area around the throttle mechanism allowing for clearance on problem tanks. Polyethylene tanks start their life as lump of poly that when melted evenly spreads itself around a rotating mold, to later carefully heat with a heat gun any section of a tank and change the shape has no effect on the integrity of the poly itself unless pushed too far, thinning it. We recommend having this professionally done for the reason some people may neglect to properly remove all the fuel from an existing tank or if not competent may make a mess of it. 

Clymer manuals are the most user-friendly repair manuals. They are written for the do-it-yourself-er as well as the experienced mechanic by industry experts. Step-by-step instructions based on the complete disassembly of the machine. This manual in written to cover 90-94 models but nearly all of the information will apply to newer models also.

Genuine Honda Factory Service Manual specifically for your CRF250L

Honda XR650L rear shock upgrade. The experts at Cogent Dynamics know suspension! A proven performance rear shock for your XR650L for use under the most demanding conditions and on the roughest terrain worldwide.

Damping rates optimized to your specific needs, giving you the best ride comfort, traction and control. Frequency and velocity sensing valving works great over wide ranging conditions. Low internal friction. All CNC machined components for top quality and performance. Compact and rigid design with internal separator piston. Adjustable for spring preload and rebound damping. Fully serviceable shock is designed for the long haul.

 *Spring color may vary due to specification requirement and availability.

Good News: There’s finally a plug & play LED headlight conversion kit for your 2008-2020 WR250R and WR250X!

This kit includes a sealed LED headlight assembly with plug & play electrical connection, adjustable powder coated steel mounting bracket set, and mounting hardware. 

Installation is a five minute, one beer exercise. If you can change a residential light bulb you will have no problem installing this conversion kit. We promise.

Please note that you will need to reuse your OEM upper headlight mounting grommet and two aim adjustment springs.  Or add new ones to freshen up your whole headlight unit.

Low Beam: 2,100 Lumens, 20 Watts
High Beam: 2,800 Lumens, 30 Watts
Operating Voltage: 10V-30V DC
Color Temp: 6,000K
Lifespan: >50,000 hours

• High-density polyethylene gas tanks offer maximum fuel-carrying capacity
• All tank colors match OEM colors
• All necessary hardware included (tank decals not included)

More range at a great price. Choose  the 2.6 gallon tank for the newer KLX250S in Black, Green, Natural or White.

  This tank will NOT fit the 2006-2008 models.

A high quality master link press tool from Wirth Machine used for the removal and installation of master links using a press fit link plate.

Fits 520, 525, and 530 pitch chain.

A fresh set of brake rotor bolts. These bolts already have thread lock compound applied to the threads.

Stock OEM works with factory rotors, comes in a pack of 6.

For aftermarket rotors like Warp 9 or EBC front and rear sets are available.

Front comes in pack of 6
Rear comes in pack of 4.

A kit consisting of 15 (9 front - 6 rear) KLR650 rotor bolts, enough to do the front and rear. 

Class 10.9 steel rotor bolts provide excellent sheer strength and include medium-strength threadlock patches to securely fasten your rotor

Special tool to remove the flywheel/rotor from the end of the crankshaft. You have to remove the flywheel/rotor to upgrade the doohickey.

The Complete Doohickey Replacement Kit features the Doohickey supplied by Eagle Manufacturing, a torsion spring accompanied by a drill bit, a generator cover gasket, and an exterior cover gasket. Additionally, it includes all necessary components for rotor removal, along with a replacement bolt for reassembly.

Superior Filtration:

Honda recommends replacing this oil filter screen every 7500 miles.

Replacement friction plates and drive plates.

Gasket for the engine case cover over the clutch. Doing any clutch work, you probably want to replace this gasket so you don't have any leaks when you are all done with the project.

A high quality top end gasket set for the XR650L

• Includes aluminum cylinder, piston kit, and special gasket set designed for larger water jackets
• Bolts on with no machining required
• 94mm big bore piston
• Aluminum cylinder designed with wider water jackets for better cooling.
• Forged hi-compression piston  12.8:1
• Includes all necessary Rings, Clips, and Gaskets.

Solid reliability and easy installation. This manual tensioner is a good upgrade for any modified motor, especially if it is ridden hard.

A new gasket is included.

New Bearings for your DRZ400.

If you are in the lower end doing work, new bearings are cheap insurance for all that hard work.

THE LUGGAGE RIGGING POSSIBILITIES ARE ENDLESS!

This kit will set you up with the full Green Chile Adventure Gear treatment. You will be able to haul up to four bags of your choice. One system that can be rigged for day trips and easily scaled up for an expedition or extended trip.

No expensive bags required. Any bag becomes motorcycle luggage.

Don't have a rack on your bike? No problem! The flexible soft rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and you're ready to get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style contact points.

Contruction Features:

• 1" Tubular climb-spec nylon webbing
• Daisy loops along sides and rack surface
• Heavy Duty cam buckles on each corner
• Tensioner loops to keep your luggage secure as you travel
• Ability to carry two bags on the back and two bags on the side.

This Kit Includes:

• 1 Uprising Soft Rack Base
• 2 Soft Rack Side Straps
• 6 Cam Tension Loops
• 2 Ring Tension Loops
• 2 Ring Loops
• 2 Six Foot Runner Loops
• 4 Four Foot Runner Loops

Nomadic Rack for the TW200. CNC laser cut from 3/16" 5052 aluminum with a large 12 x 10-7/8 mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with a 4 point mounting system with no modifications required. There are multiple strap slots for securing gear bags and cargo. Doubles as a grab handle or tow bar. Is compatible with RotoPax mount. All hardware and instructions included.

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

Simple, lightweight rack made from rugged 1/8" 5052 Aluminum, with a rigid 5-point mounting system.

Low profile allows for easy seat removal.

Features:

• 12" long by 10" wide
• Integrated turn signal mounts
• 16 strap slots for securing cargo
• RotoPax mounting kit compatible
• All hardware and instructions included

Note: Placement of this top rack does require removal of the stock tool bag.

Cycle Racks Bag Supports can used for many different Cycle Racks and can be used on either the front or rear rack.

When they developed these, they wanted a functional, yet "Easy On- Easy Off application. The pig tail hook goes up, over and underneath the bar of the rack, they can also be used upside down on the rear rack as side boards. To install them, wing them out, slide them in place and then wing them back down. Simply reverse the process to remove them.

Rok-Straps are supplied to secure them in place. They are pre-drilled to accept the pattern of the Roto-Pax Pack Mount (sold separately) so you can carry fuel or attach them to your own bags.

They are sold together in a set of one right support and one left support.

COLOR: Black

This DRZ400 rear rack, hand-built by B&B Engineering in Australia is made from 4mm aluminium 5083 plate tig welded to the support tubing circumventing the plate. This material was chosen because of its extreme suitability for welding as well as abrasion and impact resistance, and all of this keeping in mind the full weight of the bike and rider. Once complete they are given a polished finish or coated with a super-durable black polymer. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

These racks are smooth and sturdy enough to use as a grab handle.

Check out the bolt-on Luggage Plate for the B&B Rack for those times you need to carry a larger load!

Constructed from heavy-duty waterproof tarpaulin with durable heat welded seams. This coated material makes clean-ups a breeze. Roll-down tops create a waterproof seal and are held in place with heavy-duty ITW quick release buckles. Wide support straps are adjustable via hook and loop material to fit almost any width seat.

• Available in 20 or 30 liter capacity
• Sold in pairs.

Replacement folding shift lever, stock length made by IMS.

A stock replacement brake pedal for the DR650. Nothing fancy but sure gets the job done. Just order it up and get back on the trail. See our Brake Pedal Adjuster Bracket that allows you to adjust the position of your brake pedal to perfection.

Replacement shift lever from IMS with folding tip.

Warp 9 has created a beautiful brake pedal machined from billet aluminum to an 8mm thick work of art. A stainless steel pin eliminates wear in the frame. This pedal has the ability to move the spring loaded brake tip 10mm either way from the center position. The arm is arched to provide clearance for riders who have the lowpeg + centerstand combination.

The Warp 9 shift lever is black anodized and the Warp 9 logo is laser etched into the finish. The black anodized knurled aluminum tip is folding and returns via a stainless-steel return spring. Includes the pinch bolt as well.

The tip is replaceable in the event of damage.

Sold individually.

Mika Metals Hybrid Series handlebars are truly a marvel of engineering. It is the first oversize handlebar in the world that fits on 7/8" clamps. 

The patent pending design is the most unique idea to shake up the handlebar industry in quite some time. They retain all the flex properties of the pro series handlebars and allow you to run oversize bars without the oversize clamps.

Constructed from the highest quality aerospace 7075 aluminum for maximum strength.  CR High Bend, includes injection molded bar pad.

Bars only fit 7/8" clamps

Keep track of your keys easier with our embroidered patch on a keychain.

Finished with metal ring with eyelet and merrowed border.

Patch measures 1.5" x 5"

As pictured; includes:

Heavy duty shock bumper. The stock bumper is prone to disintegrating with age. If you are re-valving your shock it's a good idea to be sure the bumper is in good shape.

• Lighter and stiffer than stock, these high quality straight rate springs are made specifically for the DL line.
• A proper rear spring will give a smoother more controlled ride.
• Available in a multitude of spring rates, one is the perfect fit for your bike and riding style.
• Stock spring is rated at 8.2 kg/mm for the DL650, and DL1000

 Adapters are required for this spring

Bike-specific light mounts made of powder coated steel allow easy installation and maximum stability, even off-road. Includes mounting material and instructions.

This listing is for the mount only, no lights included.

Make the Edge-2 installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. Will need a crimp tool or set of needle nose pliers to crimp connectors on.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

We start with Excel or Sun rims, OEM or Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

• New OEM or Warp 9 hubs with bearings and seals installed
• Excel or Sun 3.5" x 17" front rim
• Excel or Sun 4.25" x 17" rear rim
• Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Complete set of 'Adventure' wheels. These are the same rim sizes as used by the BMW GS and other big adventure bikes. The 19" front and wide 17" rear will give you great twisty road handling on the pavement while still being dual-sport friendly.

We start with Excel or Sun rims, OEM or upgrade to Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

• New OEM or upgrade Warp 9 hubs with bearings and seals installed
• Excel 2.5" or Sun 2.75" x 19" front rim
• Excel or Sun 4.25" x 17" rear rim
• Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Complete 'Off Road' wheels for your DRZ400 SuperMoto.
We start with Silver Excel or Sun rims, OEM or Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

• New OEM factory or Warp 9 billet hubs
• Silver Excel or Sun 1.85"x21" front rim
• Silver Excel 2.5x18 or Sun 2.75x18 rear rim
• Buchanan's stainless steel heavy gauge spokes with plated nipples

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

No longer need your speedo drive? Install an electronic unit? This CNC machined aluminum unit will replace the stock speedo drive on the front wheel keeping things properly spaced and sealed up.

To suit a 20mm Axle.
Before placing your order please ensure you check the diameter of the axle, as the earlier models may have different sized axles.

All the parts you need to freshen up your front brake caliper. New piston seals, slide pin and boots. Fix that sticky or limp front brake.

All the parts you need to freshen up your brake master cylinder. New piston, seals, return spring, boot and snap ring.

Made by Nissin, an OEM supplier in Japan

Stock size rear brake rotor laser-cut from high-carbon content 410 stainless steel, then lap cross hatched and heat-treated. Each one then has a high-temp paint applied to surfaces like cooling holes and edges for a clean finished look.

Includes a fresh set of brake rotor bolts.

Constructed of 3mm-thick (1/8"-thick) aluminum for heavy-duty, light-weight protection. Baseplate includes side protectors that wrap around the engine case to provide both bottom and side protection.

This is one of the gnarliest skid plate made for the KLR. Made from 3/16" aluminum, it is laser cut and CNC formed. All seams are welded on both sides and the entire plate is black texture powder coated. Includes all the mounting hardware.

This is one of the gnarliest skid plate made for the KLR. Made from 3/16" aluminum, it is laser cut and CNC formed. All seams are welded on both sides and the entire plate is black texture powder coated. The plate mounts in minutes using stainless steel hardware.

IMPORTANT NOTE: The standard kit will work with all crash bars except for Givi and Happy Trails. Select the Givi option for that brand. This plate will not work with the Happy Trails crash bars.

Select the optional heavy duty mounting brackets if you want to replace the wimpy stock mounts with steel brackets.

The B & B Eng. DRZ400 Bash Plate is made from 4mm thick 5083 aluminium plate. Strong and great looking, this is the top of the line protection plate for the DRZ. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.

Replace the wimpy stock DRZ400 Skid Plate made from 4mm thick 5083 aluminium plate. Strong and great looking. Leave the stock wings in place and give yourself something that will really stop any damage between the frame rails. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.

• Made from strong and lightweight aircraft aluminum
• Protects vital engine parts from rocks and debris
• Custom fit to your specific bike model
• Oil drain hole for easy access
• All mounting hardware included

Moose Racing's Heavy-Duty, 4mm thick 5052 aluminum, to protect expensive and fragile radiators from side impacts and twisting.

• Includes all necessary mounting hardware and instructions
• Not compatible with over-sized gas tanks

Protect your frame/paint from scuffs and scratches with frame guards. The DRZ 400 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.

Greatly eases basic chain maintenance, tire changes, parking, cleaning, etc. All necessary hardware is included. Installs using basic hand tools. Tough black powder coated finish.

For riders who wish to run the centerstand and the lowered footpegs we recommend installing a Warp 9 brake pedal. The Warp 9 pedal is arched to give the necessary clearance under the pedal.

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. 

• Each footpeg is cast, heat treated, and hardened from 17-4 stainless steel, given a solution annealing treatment, and age hardened for superior strength
• Width (57 mm) and length (90 mm); slightly convex platform for better boot positioning and grip when leaning forward or back
• Dual plane teeth provides traction without the "stuck" feeling
• Made in the U.S.A.

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.

Reusable billet aluminum muffler joint gasket. Factory joint gaskets usually cannot be removed from the pipe without damage. This one can be used over and over again. Pays for itself the first time you need to remove you muffler during service or repairs.

This is a new gasket for the cylinder head - head pipe junction. Installing a new one with your new header will ensure a good seal and no exhaust leak.

Their baffle was designed to replace the stock insert. The baffle produces a nice note compared to the de-restricted stock version and dyno test results showed an increase on 2 hp up top.

A noise test on the insert was conducted at the EPA Victoria Vehicle Test Station at Macleod under controlled conditions with Class 1 meters.

Some extra details:

1. The ADR test is conducted at an engine speed which is 50% of the engine rpm at which the engine develops maximum power. However, this engine speed is determined when the bike is in restricted form, with a throttle restrictor that stops the throttle being fully opened. This is why the ADR engine test speeds are so low. However, they are the engine speeds used to determine compliance.
2. On the ADR test, the B&B tip was over the signature noise emission, but a tolerance of 5 dB(A) is allowed before prosecution would be initiated. With this tolerance, the insert would not be prosecuted as it is just 4 dB(A) over the signature.
3. When tested with the standard OEM tips (as fitted when delivered from Suzuki Australia), the Suzuki came in at 95 dB(A) for the ADR test

Does not contain a spark arrestor. Check local laws on spark arrestors before purchase.

Dual Sport tube-type tires for the TW200 or the VanVan.

With its versatile tread pattern, the E200 makes an ideal OEM replacement.

• Aggressive tread pattern for traction on the trail
• Heavy Duty carcass construction
• Durable, long lasting rubber compound

Dual Sport tube-type tires for the TW200 or the VanVan.

With its versatile tread pattern, the 428 makes an ideal OEM replacement.

• DOT approved
• 4 ply rated nylon carcass

Front tire is a 130/80-18 (66P load / speed rating) while the rear is a 180/80-14 (78P load / speed rating).

Heidenau tires are made in Germany and they are high quality motorcycle tires for street, off road and adventure riding.

Durability, It’s about the Rubber

Heidenau’s compound uses a high natural rubber content, and there’s a lot on there. This naturally resilient compound, combined with sturdy Belted construction, makes for one of the most trusted, longest lasting tires available to long distance travelers.

K60 Tread design:

The K60’s interrupted block chevron pattern makes for a respectable off road tire that’s smooth on the street.

Heidenau tires are made in Germany and they are high quality motorcycle tires for street, off road and adventure riding.

A tire worthy of standing side by side with the legendary K60 Scout. The K60 Ranger is designed and developed to be the off-road cousin in the K60 family. This is not a Scout with different tread. Heidenau started from scratch with entirely new carcass and compound to maximize off-road performance and reliability.

“Rated by Heidenau as a 30% street / 70% off-road tire, the new K60 Ranger sits next to the K60 Scout in Heidenau’s lineup, offering a more off-road biased design to help adventure riders explore further into the backwoods with more confidence to tackle difficult terrain. Like the Scout, the K60 Ranger also gets a reinforced carcass with high puncture resistance. Where it differs is a more-open, knobby tread pattern that utilizes large gaps between center blocks, instead of a continuous center strip, giving it the ability to dig into loose terrain more effectively. What’s more, the Ranger utilizes a softer rubber compound that helps increase grip both off-road and on the street. Plus alternating side lugs, tied together with crossbars, enhance the tires ability to climb out of ruts and improve cornering stability.” – Rob Dabney - ADV Pulse

Tread design:

The K60 Ranger’s new tread design has dirt and big bikes in mind. While the open block design should keep the tread from loading-up in muddy conditions, the compound and carcass should keep the ride stable when you’re back on the street. With features intended to give integrity to the side blocks, the K60 Ranger should be at home on single track or cruising down the highway.

Tubeless tires (TL) can be used with spoke wheels, but Tube Type (TT) tires cannot be used with TL wheels.

New tires and tubes deserve new rim strips! Choose the correct size for your wheels and toss-out those old cracked and broken ones.

For 19" rims, please order the 18" rim strip. These fit just fine!

Be sure to order the 2.25" wide strip ONLY if you have SuperMoto rear rim. This is a 16" strip that will fit your 17" SM rim perfectly!

You can purchase single strips or sets for your wheel sizes.

This is a great SuperMoto tire that has increased grip on wet roads, with a focus on low friction surfaces (such as city streets, worn tarmac, etc).

These have a compound solution that enhances chemical grip and adhesive properties in all different situations.
Metzeler's patented mixing process delivers a more homogeneous compound that emphasizes the chemical properties and results in more resistant to the wear process.

These are tubeless tires and V rated (max speed of 149 mph)

Charges and maintains all 12 volt lead acid, gel and lithium iron phosphate (LiFePO4)/lithium ion polymer Non-RS/Non-BMS powersport batteries

Features:

• CONSTANT CURRENT CHARGE - If the battery voltage is over 10 volts, the charger will deliver a 2 amp charge until the battery reaches 14.2 volts.
• MAINTENANCE CHARGE - When the battery reaches 14.2 volts, the charger will automatically convert to maintenance mode. The charger will revert to charge mode when the voltage drops below a specified voltage.
• LOW VOLTAGE RECOVERY - If battery voltage is below 8 volts, the charger will apply a .2 amp charge to recover the battery, once the battery reaches 8 volts, the charger will apply a .5 amp charge, at 10 volts a full 2 amp charge is applied until the battery is fully charged.
• AUTOMATIC VERIFICATION STAGE - Charger automatically stops charging if the battery does not reach at least 10 volts after 2 hours of charging.
• SAFETY - Power is not passed thru the charging leads unless they are connected to a battery.
• LED indicator light shows charging status.
• Includes heavy duty clamps and fused ring terminal SAE adapter.

The Shorai LFM Duration Recommendation is the best overall pick for most applications, and has been selected to give strong cranking performance and long lifespan. 

• Capable of holding a charge for up to one year without maintenance
• Two to four times the life of lead-acid batteries
• A Battery Management System that protects the battery from over-discharge.
• Carbon Fiber Composite case
• Stronger cranking for better starts
• Environmentally friendly, just discharge and dispose
• Ultra light and compact

Measures 4.45" x 3.5" x 2.28"
Weight (lbs): 1.52 lbs
Weight (kg): 0.69 kg
Cold Cranking Amps: 210
Polarity: [- +]

Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box.

The Shorai LFM Standard Recommendation is the best overall pick for most applications, and has been selected to give strong cranking performance and long lifespan.

• Capable of holding a charge for up to one year without maintenance
• Two to four times the life of lead-acid batteries
• A Battery Management System that protects the battery from over-discharge.
• Carbon Fiber Composite case
• Stronger cranking for better starts
• Environmentally friendly, just discharge and dispose
• Ultra light and compact

Measures 4.45" x 3.5" x 2.28"
Weight (lbs): 1.52 lbs
Weight (kg): 0.69 kg
Cold Cranking Amps: 210
Polarity: [+ -]

Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box.

Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals, it is non-explosive and non-combustible.

The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.

165 CCA 12V/36WH
Package Dimensions: 6.20 x 2.80 x 4.30

• Compact, adhesive back
• Easy-to-read display
• Flashing low voltage warning
• Measures 1.57" diameter x .43" D
• Effective temperature range: 14 ~ 140 °F

Heavy duty replacement voltage regulator. More robust but lower cost than the factory unit.

• Engineered to keep your chain clean and lubricated under the harshest conditions
• The triple action formula cleans, lubricates and protects your chain - no matter if it's a standard or O-ring chain
• Engineered to adhere to your chain, on or off-road, and lasts long during those epic adventures
• The biodegradable solvent carrier helps clean chain and aids delivery of oil to micro-pores in chain
• Biodegradable oil penetrates and adheres to metal for an efficient, long-lasting lubricant
• Biodegradable wax seals in oil and keeps dirt off of your chain
• Biodegradable and non-toxic
• Available in 12-ounce (EU: 354,88 ml) aerosol cans

The set includes a 27mm for the rear and a 22mm for the front. Each 10 inch forged steel tire iron has a hex wrench on one end. The rounded spoon end minimizes pinched tubes and scarred rims.

This is a DRC wrench for your axle nut on one side, and a great tire spoon on the other.The long handle makes it easy to undo tight axle nuts and give you a bunch of leverage for changing tires. These are heat treated steel and range from 10 to 10.6 inches long.

The Moose Tire Bead Tool holds your tire in place as you work you way around the tire

Made of aluminum with a nylon screw so it will not scratch the rim

Sold in pairs

Don't hit the trails without these tire irons. Each 10 inch forged steel tire iron has a hex wrench on one end. A 22mm for the front and a 24mm for the rear for older generation KLRs ('87 - '07) or a 19mm for the front and a 27mm for the rear for the new generation machines ('08 and newer). Rounded spoon end minimizes pinched tubes and scarred rims.

Ever had to turn back on the trail because of downed limbs? Or have you ever been moto camping and needed some wood for a fire?

This is the tool for you then! We have tried this manual chainsaw and it makes quick work of hard woods like Oak.

The chain itself is 25 inches long with 8 inch nylon straps at each end. All together this saw weighs 1/4 of a pound. This will tuck away nicely into any tool pouch or saddle bag as it roll up into a tight round.

Replace these any time you feel excessive play in the sprocket hub.

Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier.

Sold as a full set.

Ride in warm temperatures a lot? Worried about your motor oil just getting too hot? The Trail Tech Universal Fan Kit mounts up to the backside of the DR's oil cooler to draw cool air across it and keep those oil temps down. An electronic temperature sensor mounts to the fan, no need to cut any fluid lines, and automatically turns the fan on when needed to keep the temperature in the optimum range.

The activation sensor can be set wherever you like to keep the temperature right where you want it. Backlit for easy viewing anytime it also includes a volt meter.

Kit Contents

• 4 inch SPAL fan
• TTV Temp Meter
• Temperature Sensor
• Complete Wire Harness

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit harsh after a couple hundred miles. These very comfortable sheepskin seat covers give you that extra bit of 'cush' and provides superior air circulation. Velcro straps allow easy install and removal when you don't need it. Measures 14" wide by 19" long, the perfect size for Dual-Sport seats.

This is a high-quality seat cover done by Moose for the DRZ400. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam. Heavy-duty marine grade vinyl with UV protection for long life. Double stitched for durability too!

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.

This is the brace needed to stabilize the wing like structure they call a front fender on the KLR – both generations. This simple bolt-on reduces wind buffeting and increases steering stability at highway speeds. It also helps carry the weight of a fender mounted tool bag.

Made from laser cut 5052 aluminum, then CNC formed and beautified with a shiny black powder coat. Easily mounts in a few minutes using the included stainless steel hardware.