Search Products

The ProCycle rack system is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.

Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Multiple mounting points for various luggage and strap options. Top rack includes a mounting point for a rotopax mount (not included). Side panel guards keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.

Top rack is 15in wide by 11in from front to back.

This set includes the ProCycle Top Rack, Side Panel Guards, and sub frame bracket:

Nomadic Rack for the TW200. CNC laser cut from 3/16" 5052 aluminum with a large 12 x 10-7/8 mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with a 4 point mounting system with no modifications required. There are multiple strap slots for securing gear bags and cargo. Doubles as a grab handle or tow bar. Is compatible with RotoPax mount. All hardware and instructions included.

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature. It is an easy install and will allow you to strap your cooler, lunch box, tools, extra gas can, or whatever on the back of your bike. Comes complete with all hardware and easy install instructions.

A durable, lightweight option for your TW200 when transporting flexible luggage on the trail.

• Made of 15mm thick HDPE high density polyethylene plastic which is both durable and non-corrosive.
• Weighs up to 30% less than metal or aluminum racks.
• Convenient tiedown points designed into rack
• Kit includes mounting hardware.

Our ProCycle top rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

• 5/8" steel tubing
• Computer precision bending
• Durable powder coat finish
• CNC cut brackets
• Top rack dimensions 15" wide 11" long
• Top rack has RotoPax and hard case mounting tabs
• All mounting hardware included.

Top rack only, side racks sold separate.

This luggage rack is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.

All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

Luggage plates will come with pre-drilled holes to suit rotopax mount. On request luggage plates can be pre-drilled to suit Givi top case mounting hardware.

DIMENSIONS

• Total Length: Approx 33cm
• Total Width: Approx 33cm closest to seat, approx 27cm at rear

The Honda Maxi Luggage Rack and extension is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

DIMENSIONS

Maxi Plate:
Total Width Approx 45cm, Width of flat surface approx 40cm

Total Length Approx 33cm, Length of flat surface approx 33cm

Extension Plate :

Total Width: Extension Plate Approx 46cm

  Will not fit adventure sports model. Please see other listing.

The CRF300L & rally rear carry rack is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible. Our carry racks are Tig welded with a polished finish and are sturdy enough to use as a grab handle.

DIMENSIONS

Length: Approx 35cm - Total Length: Approx 42cm

Total Width Flat Surface: Approx 17cm

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.

Comes complete with all hardware and easy install instructions.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Honda.

Comes complete with all hardware and easy install instructions.

Available in Polished Aluminum, or Black Powder Coat

B&B Off Road's Honda Africa Twin Adventure Sport Big tour combo Luggage Rack has a two-piece main luggage plate with an added extension plate that mounts directly to the main rear rack and grab rails. Requires no modification for mounting.

Main luggage, adapter mounting plate and extension are all made from 5mm aluminum 5083 structural plate.

Very quick installation and can be done in a matter of minutes. The adapter plate is threaded for an easy install and removal of luggage plate which also includes mounting locations of their extension plate. Extension plate has some CNC machined billet clamps used for mounting.

Extension plates are great for those wanting to carry a larger load for a weekend trip or even to distribute some of the weight further forward.

All the necessary bolts and brackets are supplied for mounting.

Rotopax holes are pre-drilled to suit the required mounts.

DIMENSIONS

Mini Plate:

• Total Width Mini Plate Approx 32cm
• Total Length Approx 28cm

Extension Plate/Pillion

• Total Length Approx 27cm
• Width Approx 39cm

Total Length Including Mini and Extension Plate: Approx 55cm

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX230 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

This DRZ400 rear rack, hand-built by B&B Engineering in Australia is made from 4mm aluminium 5083 plate tig welded to the support tubing circumventing the plate. This material was chosen because of its extreme suitability for welding as well as abrasion and impact resistance, and all of this keeping in mind the full weight of the bike and rider. Once complete they are given a polished finish or coated with a super-durable black polymer. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

These racks are smooth and sturdy enough to use as a grab handle.

Check out the bolt-on Luggage Plate for the B&B Rack for those times you need to carry a larger load!

Using the included steel bracket to create 2 forward mounting points, this XT250 rack design is stronger and more well balanced than the typical "plate on the rear fender" design offered by other companies.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series XT250 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

ProCycle side panel guards to keep your saddlebags from fouling the side covers. Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.

Add Moose 20L Saddlebags for a very economical luggage solution.

Add Wolfman Rocky Mountain Expedition Saddlebags for a premium luggage solution.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!

This is the ENDURO Series DR650 rear rack which measures 10 inches wide and 12 inches long.

• Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

The ProCycle top rack is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.

Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Multiple mounting points for various luggage and strap options. Includes a mounting point for a rotopax mount (not included).

Top rack is 15in wide by 11in from front to back.

Top Rack Only. Complete luggage system available HERE.

Simple, lightweight rack made from rugged 1/8" 5052 Aluminum, with a rigid 5-point mounting system.

Low profile allows for easy seat removal.

Features:

• 12" long by 10" wide
• Integrated turn signal mounts
• 16 strap slots for securing cargo
• RotoPax mounting kit compatible
• All hardware and instructions included

Note: Placement of this top rack does require removal of the stock tool bag.

• 12-gauge steel construction
• Multiple tie-down locations
• Easy installation with no modifications required
• Hold up to 40 lb.
• Powder-coated black texture finish
• All mounting hardware included

Steel cargo rack from Moose Racing. It features a nice wide platform and a durable powder coat finish. 17" wide and 10" long.

• 12-gauge steel construction
• Multiple tie-down locations
• Easy installation with no modifications required
• Hold up to 40 lb.
• Powder-coated black texture finish
• All mounting hardware included
• Made in the U.S.A.

• Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

• Smartly designed to accommodate, but not limited to: 1 gal. - 1.75 gal. Rotopax fuel/water packs, Wolfman Luggage - Wolf Tail bag (M303), and Givi Monokey top cases (separate mounting kit required)
• Large 14.5"(Width) X 13"(Length) luggage platform
• CNC laser cut from 1/4" 5052 Aluminum - weighing only 2lbs. 10oz.
• Each rack is sand-blasted and sprayed with a premium DuPont semi-gloss mini-tex powder-coat finish
• Stainless hardware kit and installation instructions included
• All materials and craftsmanship are sourced 100% in the USA
• Carrying capacity is 20lbs.

T7 Solo Carry rack has been designed predominantly for the solo rider to keep loads as forward and low as possible. The plate has multiple attachment points making easy to tie down bags.

The plate is pre-drilled for mounting systems for both Givi monokey and Rotopax. The rack is light in weight only weighing 2.3kg.

• Fits with standard seat only. Will not fit with Rally seat
• Fully tig welded
• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• 420mm x 260mm surface area
• Slim design
• Compact and rigid
• 4 Bolt removal

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Honda.

Comes complete with all hardware and easy install instructions.

Choose from powder coated or raw aluminum finish.

• Rear rack comes with grab bars, designed for specific models
• Flat surface with many fitting holes for cargo box and its box base installation
• Comes with loading hooks for secure luggage holding
• Can be used with GIVI universal box bases
• Maximum loading capacity is 5 kg / 11 LB

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets.

Made 'down unda' by B&B Off Road Engineering in Australia, these racks are CNC machined from 5mm 5083 aluminum plate with lots of slots around the edge to attach your RokStraps or other tie-down devices. The plate attaches directly to the CRF rear frame with four screws that are included.

There are four options for this plate, two sizes (Mini and Maxi) and two colors each (Polished and Black Polymer coating). The Maxi Plate is 18" wide at the seat, 13" long and 8.5" wide at back. The Mini Plate is 12 3/4" wide at the seat, 11" long and 9 1/4" wide at the back.

The Big Tour Extension optional add on below is a forward extension for the Luggage Plates shown above. CNC machined from the same 5mm 5083 aluminium plate, this covers the rear portion of your seat and turns that area into a solid platform for packing more stuff for your RTW adventure.

Pro Moto Billet products are beautiful. Strong, functional and beautiful. CNC machined from 1/2" thick 6061 aluminum. Once complete, the rack is then 'hard black' anodized for durability, protection from the elements and ease of maintenance. All fasteners are stainless steel to continue the ease of maintenance theme.

Available in black only.

• Made from 4mm 5083 Structural Plate
• Fully tig welded 
• Comes in polished or black PPA coating. 
• All hardware for mounting is included.
• Installation guide included

Note - Drilling of the rear guard is required for installation.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Honda.

Comes complete with all hardware and easy install instructions.

THE LUGGAGE RIGGING POSSIBILITIES ARE ENDLESS!

This kit will set you up with the full Green Chile Adventure Gear treatment. You will be able to haul up to four bags of your choice. One system that can be rigged for day trips and easily scaled up for an expedition or extended trip.

No expensive bags required. Any bag becomes motorcycle luggage.

Don't have a rack on your bike? No problem! The flexible soft rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and you're ready to get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style contact points.

Contruction Features:

• 1" Tubular climb-spec nylon webbing
• Daisy loops along sides and rack surface
• Heavy Duty cam buckles on each corner
• Tensioner loops to keep your luggage secure as you travel
• Ability to carry two bags on the back and two bags on the side.

This Kit Includes:

• 1 Uprising Soft Rack Base
• 2 Soft Rack Side Straps
• 6 Cam Tension Loops
• 2 Ring Tension Loops
• 2 Ring Loops
• 2 Six Foot Runner Loops
• 4 Four Foot Runner Loops

Using the included steel bracket to create 2 forward mounting points, this WR250R rack design is stronger and more well balanced than the typical "plate on the rear fender" design offered by other companies.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series WR250R/X rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Wide Adventure rack for the WR. Precision laser cut from .25" 5052 aluminum then powder coated black with a shot peened look. This rack is 11" x 17.5" and has numerous tie points for straps or bungees to secure a load. It is pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.

The Hardcore Soft Rack has been specifically designed for smaller bikes that have very little support in the back for luggage.

The loops on the base and the side straps provide attachment points for our strap kits to secure bags across the back and down the sides of your motorcycle.

We have incorporated two carbon fiber support bars to increase rear carrying capacity.

NOTE: Aluminum support bars have been upgraded to carbon fiber, there is no longer tire iron functionality.

Construction Features:

• Heavy Duty Metal Cams
• Rubber cam buckle covers to protect your bike
• MOLLE Compatible Spacing
• Heavy Duty Nylon Webbing
• Integrated storage for support bars
• Carbon Fiber Support Bars 
• All Attachments Fully Adjustable

A small light-duty Dual Sport Rack for the WR. Precision laser cut from 3/16" 5052 aluminum. It is powder coated black with a shot-peened look. This rack is 9" x 10.5" at widest points and has numerous tie points for straps or bungees. It's pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in about 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!

This is the ENDURO Series TW200 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Instructions included, uses stock hardware.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.
• Ready for your 1 gallon Rotopax can and mount
• 1.75 gallon Rotopax fuel can is not recommended with this rack

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF250L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF450L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF300L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

For mounting Hard Cases to various brands of side racks such as SW motech EVO quick lock, Moose or any racks with a rectangular design constructed with 5/8" to 3/4" material

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists and then anodized black.

PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem. See bottom image.

Features:

• Prevents saddle bags from getting caught by rear wheels
• Made of steel 16mm durable pipe with black powder coat finish
• Can be used with DRC Touring Carrier (Cargo Rack), comes in left and right supports
• Maximum loading capacity is 5kg / 11 LB per one side support

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX300 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the stock rack. Attaches directly to the stock rack with four screws that are included. Available in either polished aluminum or a black polymer coating.

These plates are pre-drilled making installation of a RotoPax mount quick and easy.

Dimensions

• Total Length: Approx 35cm / Flat Surface: Approx 35cm 
• Total Width: Approx 39cm /  Flat Surface: Approx 32cm

B&B Off Road's Honda Africa Twin Adventure Sport Big tour combo Luggage Rack has a two-piece main luggage plate with an added extension plate that mounts directly to the main rear rack and grab rails. Requires no modification for mounting.

Main luggage, adapter mounting plate and extension are all made from 5mm aluminum 5083 structural plate.

Very quick installation and can be done in a matter of minutes. The adapter plate is threaded for an easy install and removal of luggage plate which also includes mounting locations of our extension plate. Extension plate has some cnc machined billet clamps used for mounting.

Extension plates are great for those wanting to carry a larger load for a weekend trip or even to distribute some of the weight further forward

All the necessary bolts and brackets are supplied for mounting.

Rotopax and Givi Monokey holes are pre-drilled to suit the required mounts.

Total Width Maxi Plate Approx 45cm, Width of flat surface Maxi Plate approx 40cm

Total Length Approx 33cm

Our latest crf230f rack is designed for superior strength in mind for use in commercial and rural conditions. The main part of the rack in constructed from mild steel which connects to the subframe in 3 points and is designed to stiffen the assembly to carry a decent pay load. The top plate of the rack is 5mm aluminum with multiple tie down points and predrilled for rotopax/ fluid tanks which are available separate.

Luggage Plate:

• Total Width Approx 29cm
• Total Length Approx 33cm

Carry Rack:

• Total Width Approx 15cm
• Total Length Approx 20cm

Carry Rack and Luggage Plate Total Length Approx 54cm

The Front Rack gives a lot of options for functionality.

CycleRacks are made out of Schedule 40 11/16 black steel pipe, bent in a press, and welded together in a jig.

All of their products are 100% made in the USA. If the rack is ever broken for any reason, CycleRacks will replace it for free, you just pay the shipping.

Weighs just 2 pounds for a full 11" x 11" storage area. Fully welded construction from 16 gauge mild steel tubing then powder-coated black textured finish. Rack has a rigid 4 point mounting system. Has tabs to allow mounting the stock tool bag. All hardware and detailed instructions included.

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

The Honda Maxi Luggage Rack and extension is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

DIMENSIONS

Maxi Plate:

• Total Length: Approx 55cm / Centre Surface: Approx 50cm 
• Total Width: Extension Plate Approx 46cm /  Mini Plate: Approx 33cm

  Will not fit adventure sports model. Please see other listing.

Features:

• Rear rack comes with grab bars, designed for specific models
• Flat surface with many fitting holes for cargo box and its box base installation
• Comes with loading hooks for secure luggage holding
• Can be used as grab bars for passenger
• Can be used with GIVI universal box bases
• Maximum loading capacity is 5 kg / 11 LB

Small scratches on the inside of one of the mounting arms. Not visible when installed on your DR200. Instructions and all mounting hardware included.

• CNC laser cut from light weight 1/8" 5052 Aluminum
• Easy installation, no modifications required
• Large 12" x 9" surface area
• Sleek low profile, and lightweight!
• Rigid 4 point mounting system
• RotoPax 1 gal or 1.5 gal compatible

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series XT225 Serow rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

• Powder coated black (shot peened look)
• Fully welded construction
• Rigid 4 point mounting system
• Hardware and detailed instructions included

The Nomadic Rack for the early generation KLR650. CNC laser cut from 3/16" 5052 aluminum with a large 12" x 18" mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with no modifications required. There are multiple strap slots for securing gear bags and cargo. Rack is compatible with RotoPax mount. All hardware and instructions included.

Packages available include Rack with the RotoPax Mount or if you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

CNC laser cut from 1/8" aluminum with a large 12.5" (length) x 10" (width) mounting surface area. Quick installation with a 4 point mounting system and no modifications required. There are integrated turn signal mounts, along with multiple strap slots for securing gear bags and cargo. All hardware and instructions are included.

The Rack is compatible with all RotoPax mounts.

You may purchase the rack alone, or you can order the Rack with the RotoPax.

The ProCycle rack system is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

See the linked instructions for how-to videos.

CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the standard B&B Rack. Attaches directly to the B&B rack with four screws that are included. Available in either polished aluminum or a black polymer coating.

These plates are pre-drilled and countersunk from the bottom making installation of a RotoPax mount quick and easy.

Some older carry racks will not have predrilled holes in them to mount luggage plate in which it will require you to drill yourself (select pre2018 version)

  This is for the add -on Top Plate only.

Pro Moto Billet Cargo Racks are brutishly strong, functional, and they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum. Available in silver only.

• Racks are hard clear anodized for durability.
• PMB uses only stainless steel fasteners.
• Comprehensive instructions and all necessary hardware is included.

Note: Placement of this top rack does require removal of the stock tool bag.

The Happy Trails SL (Soft Luggage) Rack is designed for use with soft luggage of any type.

Features:

• Three point mounting system
• Strong 5/8" round tubing
• Racks add protection for the bike in the event of a tip-over
• Racks finished with a black powder coat

ADD-ON

Pillion handles designed for quick and easy removal. 

• Pillion Handles for passenger
• Made from 12mm Solid round Bar
• Can also be utilized as tie rails for larger bags 
• This listing is for rear Pillion handles only does not include base tail rack or luggage plate. Please see other listings.

Pro Moto Billet Cargo Racks are strong and functional while looking great as well. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

Nomadic Racks makes this beautiful rack for the XT225. 3 piece unit that is CNC laser cut from 1/8" 5052 plate aluminum with a semi-gloss industrial black powder coat applied. Final surface space is 9 x 14 with a weight just under 2 pounds.

With all the hardware included and excellent instructions, mounting this rack to the 4 mounting points is usually no more than a 15 minute affair and no modifications are required to your XT.

There are numerous strap and bungee holds making for a very versatile little unit. It is also totally compatible with RotoPax mounting kits and Givi top cases.

• 12-gauge steel construction
• Multiple tie-down locations
• Easy installation with no modifications required, all mounting hardware included
• Powder-coated black texture finish
• Holds up to 40 lbs.

Simple, quick installation of this 1 pound rack made from rugged 1/8" 5052 Aluminum. A rigid 4-point mounting system, but still sleek and low allowing for seat removal with no hassles.

Features:

• 12" long by 10" wide
• Integrated turn signal mounts
• Use with or without stock grab handles
• 16 strap slots for securing cargo
• RotoPax mounting kit compatible
• All hardware and instructions included

Hand built aluminum luggage rack from the B&B Off Road Engineering folks down under. This unit really is a beauty to look at and extremely rugged, made from 4mm 5083 aluminum plate! Tie down whatever you need with confidence. Whether it's your books to get to school or a bag to get across the country, no worries mate. Available in either bare polished aluminum or with a black polymer coating.

While plenty rugged to use as grab handles, you can keep your stock handles if you so desire. All necessary stainless clamps and bolts are provided.

If you want a wider platform for support, consider adding the luggage plate to this rack.

  Bike must have the DR250 Taillight installed to work with this rack.It will not work with the stock USA taillight.

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

TIRED OF LOOKING FOR A GOOD PLACE TO ATTACH TIE DOWNS AND STRAPS?

The Green Chile Adventure Gear Uprising Soft Rack is all about adding mount points to your bike. It adds over 60 mount points to the rear and sides of your bike and its quick and easy to install and adjust. The Uprising Soft Rack can be used with or without GCAG accessories, but when you add the soft rack as the base of your luggage system and combine a few other GCAG accessories you will have the world's first customizable and modular luggage system. You will not find a more versatile system anywhere else.

Don't have a rack on your bike? No problem! The flexible Soft Rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style mount points.

The GCAG Uprising Soft Rack is the flagship Green Chile innovation. This unique product is compatible with just about any motorcycle and soft luggage combination that you'd care to throw at it. Adventure bikes, dirt bikes, and crusiers...the Soft Rack does it all.

Specifications:

• 1" Tubular climb-spec nylon webbing
• Daisy loops along sides and rack surface
• Heavy Duty cam buckles on each corner

(patent pending)

B&B Off Road's KLR650 Luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

DIMENSIONS

• Total Length: Approx 42cm
• Total Width: Approx 40cm

Our KTM 950 Super Enduro Luggage Rack is CNC machined from 5mm aluminum 5083 structural plate. 

All of our Carry racks & Luggage plate racks are supplied with the necessary mounting hardware needed for fitment.

• Available in Polished or Black
• Predrilled Rotopax mount holes (not pictured, more to come)

DIMENSIONS

• 250mm wide x 239mm long

The Scramble Rack is optimized for carrying luggage on the sides. The side straps provide plenty of mount points and the spacing is MOLLE compatible. The top mounting surface on the Scramble Rack is minimal and designed for small packs.

There are two versions of this rack.

• Enduro - Attaches in the rear with fender hooks.
• Street - Utilizes a girth hitch in the rear. Works great with grab handles.

CONSTRUCTION FEATURES:

• 1 Heavy Duty Metal Rings
• 1" Heavy Duty Nylon Webbing
• Daisy loops along sides and rack surface
• 2 Heavy Duty Cam Tension Loops
• 1 pair of NRS Cam Buckle Bumpers
• Enduro model uses vinyl coated fender hooks in the rear.
• Street model uses girth hitched side straps around the grab handles.

THINGS YOU SHOULD KNOW:

• They recommend their Bag Snake Kit for rigging side bags.
• Check to see if you need an Exhaust Shield.
• Dry bags NOT included.
• Fuel bottles and holsters NOT included.

Patent Pending

The Big Tour Extension is a forward extension for the Luggage Plates.

CNC machined from the same 5mm 5083 aluminium plate, this covers the rear portion of your seat and turns that area into a solid platform for packing more stuff for your RTW adventure.

You can combine it with either the Maxi or Mini rack and then get the combo in either a Polished finish or a Black Polymer coating.

*Extension plate only, mini / maxi plate sold separate, or in complete set.

Designed to make your compact rack even more versatile for riders who need a larger luggage platform. 

• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• Weighs 1kg
• Multiple attachments points 
• Pre drilled for Givi monokey mount system
• Pre drilled for roto pax fluid containers
• This listing is for the Rear luggage plate only
• Dimensions 25cm x 26cm flat surface 
• Does not include Pillion handles or base tail rack. Please see other listings for these items

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series DRZ400S/KLX400S rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the stock rack. Attaches directly to the stock rack with four screws that are included. Available in either polished aluminum or a black polymer coating.

These plates are pre-drilled making installation of a RotoPax mount quick and easy.

Dimensions

• Total Length: Approx 35cm / Flat Surface: Approx 35cm 
• Total Width: Approx 39cm /  Flat Surface: Approx 32cm

• CNC laser cut from light weight 1/8" 5052 Aluminum
• Easy installation, no modifications required
• Large 12" x 9" surface area
• Sleek low profile, and lightweight!
• Rigid 4 point mounting system
• RotoPax 1 gal or 1.5 gal compatible

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

A high quality rack for the XR250R and XR400R. CNC milled from billet aluminum. Strong, light and good looking.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem.

Cycle Racks Bag Supports can used for many different Cycle Racks and can be used on either the front or rear rack.

When they developed these, they wanted a functional, yet "Easy On- Easy Off application. The pig tail hook goes up, over and underneath the bar of the rack, they can also be used upside down on the rear rack as side boards. To install them, wing them out, slide them in place and then wing them back down. Simply reverse the process to remove them.

Rok-Straps are supplied to secure them in place. They are pre-drilled to accept the pattern of the Roto-Pax Pack Mount (sold separately) so you can carry fuel or attach them to your own bags.

They are sold together in a set of one right support and one left support.

COLOR: Black

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.

Comes complete with all hardware and easy install instructions.

CycleRacks are made out of Schedule 40 11/16 black steel pipe, bent in a press, and welded together in a jig. All of their racks have the same platform, 18" wide by 12" deep. Includes lower mount hardware.

All of their products are 100% made in the USA. If the rack is ever broken for any reason, CycleRacks will replace it for free, you just pay the shipping.

ProCycle side panel guards to keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.

Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Side Cover Guards Only. Complete luggage system available HERE.

• Strong and durable hydro-formed 4mm aluminum for rigidity and low weight
• Black powder coating resists corrosion and keeps the plate looking good even with a little abuse (because we know you will)
• Specially designed for maximum stiffness for optimum support while remaining lightweight
• Designed to mount TRAX top cases and SysBag 15/30 soft bags (adapter kits sold separately)
• Large 1in bungee slots allow easy securing of soft luggage.
• Simple assembly to original attachment points with bike-specific components

A sturdy and compact tail rack formed from 1 piece of structural 5mm thick alloy plate. Mounting utilizes the rear factory mount and their hidden sub-frame mount bracket.

Please note a small notch on the inner black plastic guard is needed to mount bracket.

The rack comes pre-threaded for optional luggage plate attachment. 

• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• Weighs 1kg

The Happy Trails SL (Soft Luggage) Racks work perfectly with the any soft luggage bags.

Features:

• Thoroughly tested 4th generation side racks
• Three point mounting system (includes mounting hardware)
• Strong 5/8" round tubing for the arms and SL mounting loop
• Racks add protection for the bike in the event of a tip-over
• Each rack is fabricated by expert craftsmen
• Racks finished with a black powder coat

The Happy Trails SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags.

Features:

• Three point mounting system (includes mounting hardware)
• Strong 5/8" round tubing for the arms and SL mounting loop
• Racks add protection for the bike in the event of a tip-over
• Racks finished with a black powder coat

An optional add on to your ProCycle Top Rack to relocate your rear turn signals with ease.

The Happy Trails SL (Soft Luggage) Racks work perfectly with the many different bags.

Features:

• Three point mounting system (includes mounting hardware)
• Strong 5/8" round tubing for the arms and SL mounting loop
• Racks add protection for the bike in the event of a tip-over
• Racks finished with a black powder coat

The KTM 950 and 990 adventurer luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.

All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

DIMENSIONS

• Total Width Approx 35cm, Width of flat surface approx 31cm
• Length of flat surface approx 30cm

Our KTM 950 Super Enduro Luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.

All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

DIMENSIONS

• Total Width Approx 35cm, Width of flat surface approx 31cm
• Length of flat surface approx 30cm

Rear fender carry all rack by Flatland Racing

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your Honda.

Comes complete with all hardware and easy install instructions. 

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX250S/SF rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

The cargo racks are then hard clear anodized for durability. PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets.

B&B Off Road's Honda Africa Twin Adventure Sport Mini and Maxi Luggage Racks are a two-piece design that requires no modification for mounting.

Both the luggage plate and adapter mounting plate are made from 5mm aluminum 5083 structural plate.

Very quick installation and can be done in a matter of minutes. The adapter plate is threaded for an easy install and removal of luggage plate which also includes mounting locations of their extension plate (sold separate).

All the necessary bolts and brackets are supplied for mounting.

Rotopax and Givi Monokey are pre-drilled to suit the required mounts.

Giant Loop’s Tail Rack bolts to plastic rear fender, creating solid anchor points for Giant Loop gear. Includes full stainless steel mounting hardware kit. Quick, easy installation. Fits virtually every dirt, dualsport and enduro bike.

• Dimensions: 5″ wide x 8″ long x .5″ tall.
• Square bolt hole pattern.
• Includes 4x stainless steel button head bolts, 4x stainless steel nylock nuts, 4x stainless steel washers, 4x aluminum spacers.
• Weight: 8oz including hardware.
• Capacity: Limit total load to 10 lbs. maximum. Designed to provide secure anchor points for Giant Loop Saddlebags, NOT to support heavy loads.
• Multiple webbing attachment slots.
• Heavy gauge aluminum with anodized black finish.

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

The cargo racks are then hard clear anodized for durability. PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included. 10.5"Wx11.5"L

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets.

This beautiful polished rear carry rack from B&B Eng. is made from aluminum tubing and 4mm 5083 plate. 5083 is used because of its suitability for welding and high level of abrasion and impact resistance. Kit includes all the necessary stainless clamps and bolts. With the roundness and strength of the tubing supports, it makes a great grab handle when you need to lift the rear of the motorcycle.

Rear Luggage Rack Plate in your choice of color, for your Honda CRF450L. Lightweight Aluminum luggage plate perfect to strap a duffel/roll bag to, or a tool/fuel pack.

Small scuff on sticker, shown in picture. Sold As Is.

Designed to make your compact rack even more versatile for riders who need a larger luggage platform. 

• Comes in polished.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• Weighs 1kg
• Multiple attachments points 
• Pre drilled for Givi monokey mount system
• Pre drilled for roto pax fluid containers
• This listing is for the Rear luggage plate only
• Dimensions 25cm x 26cm flat surface 
• Does not include Pillion handles or base tail rack. Please see other listings for these items

Giant Loop’s award-winning Pannier Mounts offer greater adjustability and are the ultimate quick-release, lockable solution for soft luggage and gear. These mounts are ultra light and tough, with quick release, quick-mount, lockable black anodized aluminum plates secure Giant Loop’s Round The World or MotoTrekk Panniers.

GL Pannier Mounts can also be used with Rotopax gas/water cans for easy installation on many popular side luggage rack systems. Sold as a set of two, with four matching keys. Stainless steel hardware is included for GL Round The World Panniers installation.

Add the optional GSA Adapter Kit for BMW GS Adventure original equipment luggage racks and other racks with “step” around exhaust. NOTE: Will NOT fit BMW 800GSA factory side luggage racks.

This beautiful polished rear carry rack from B&B Eng. is made from aluminum tubing and 4mm 5083 plate. 5083 is used because of its suitability for welding and high level of abrasion and impact resistance. Kit includes all the necessary stainless clamps and bolts. With the roundness and strength of the tubing supports, it makes a great grab handle when you need to lift the rear of the motorcycle.