Search Products

• Each kit contains all necessary gaskets, O-rings, float valve and jets
• Complete kits to rebuild OEM carburetors

The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely. With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.

Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly  (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune, Quickshifter or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.

All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device. This BASE map can be any of the available maps from the Dynojet website.

• Compact design for discrete placement & easy uninstallation to revert to stock settings
• Easily change & upgrade tunes as you upgrade parts
• Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride’s potential
• Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300
• Analog input allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
• Easily connects to your computer via USB
• Each cylinder can be mapped individually and for each gear, giving riders more granular control
• One year warranty
• Proudly made in the USA

Use simple leverage to easily lift your dirt bike up on to a flat platform.

The platform angle adjusts easily so either wheel can be off the ground quickly and safely for work or cleaning. These adjustments can be made with the bike on the stand.

Folds up for easy storage and transport.

Adjustable legs for use on any terrain and allows for even lift height for any dirt bike.

Closeout item, as is, no warranty.

This bright and compact 6-LED flashlight plugs right into your SAE battery charging socket for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. It features a 40 inch cord so you can see in those out of the way places when you need to.

*Front fender with various minor superficial scratches on the top or sides of the fender, only visible when up close. Sold as is.

Front fender from DSA Concepts Plastics is shaped very much like the OEM DRZ400SM front fender. Big enough to be functional without wind-steering the bike like the stock fender does. Vacuum molded, these are a design improvement over stock. These are fully compatible in any combination with the original factory plastic.

Only Available in Black

Not sure what to get the adventure/ dualsport rider in your life?

How about a ProCycle Gift Card!

Load as much as you would like in $25 increments. This is a digital gift card, we will send you the information and redemption code via email once the order is processed.

*please allow 1-2 business days after the order is placed to receive the email containing the details and redemption code.

**If you would like a physical certificate to give as a gift instead of the digital code, choose USPS First Class Domestic for shipping at checkout, otherwise please choose curbside pickup and we will email you the redemption code and instructions for no shipping cost.

As each E.B.L. is built custom to each rider’s preference, Cogent offers rebound damping control and spring preload adjustability to maximize your performance wherever your adventures may lead!

However you may use your TW200, the Cogent Dynamics E.B.L. ("Easy Bonus Loop") shock is the principal improvement to take your bike and its capabilities to the next level. Whether you use your TW200 as a camp-site transit, hunting mule, trail toy or even daily driver, your custom E.B.L. shock will provide the performance and reliability you need!

The E.B.L. shock is a high quality, reliable suspension component with:

• Damping rates optimized to your specific needs, giving you the best ride comfort, traction and control.
• Frequency and velocity sensing valving works great over wide ranging conditions.
• Low internal friction.
• All CNC machined components for top quality and performance.
• Fully serviceable shock is designed for the long haul.

*Spring color may vary due to specification requirement and availability.

The Modoc 250 replacement rear shock significantly upgrades your Yamaha XT250 suspension. Cogent Dynamics custom build this high quality and high performance shock to suit your riding needs.

• Optimized damping rates to give you the best ride comfort, traction and control.
• Frequency and velocity sensing valving works great over wide ranging conditions.
• Rebound damping adjustability.
• Low internal friction.
• All CNC machined components for top quality and performance.
• Compact and rigid design with internal separator piston.
• Fully serviceable shock is designed for the long haul.

Cogent Dynamics build a fully custom suspension component, just for you. To best meet your needs, please spend a few moments providing us with your riding style (off-road / adventure, or street / commuting) and your approximate weight with gear and luggage in the comments during checkout. The information you provide helps them setup your suspension to most closely meet your needs.

Specifications for the Modoc 250:

• Fits: Yamaha XT250 from the new models introduction in 2013 to present.
• Rebound: Over 30 clicks of adjustability
• Spring Preload: Single threaded collar for ease of adjustability
• Travel: 69 mm
• Overall Length: 320 mm
• Spring rate: Selected per customer requirement
• Spring size: 57mm I.D.
• Gas reservoir: Internal separator piston type

The KLX 250s comes softly sprung which can be great for lighter riders who are not using the bike for hard off-road riding. This Cogent Dynamics, custom engineered spring fits your shock like the OEM spring (without spacers or adapters) and firms up the rear suspension.

• 2006-current KLX 250s 6.2 Kg/mm for most riders 150 to 200 lbs
• 2006-current KLX 250s 7.0 Kg/mm for most riders over 200 lbs + or for more aggressive riding conditions.

*Spring color may vary due to specification requirement and availability. 

The Modoc is an excellent replacement for the stock shock. With adjustable rebound damping and preload, you can tailor the performance to match your riding style.

Select the spring you want installed based on the load you plan to carry. For most riders, the 7.1 kg/mm spring will suit you perfectly. Weigh more than 250 lbs, or are loaded to the max, think about the 8.1 kg/mm spring. Please call with any questions.

• Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction
• Custom Elastomer Fork Seals have been tested to outlast OEM fork seals. Extends typical seal life by 3 to 5 times over OEM seals
• Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action
• Lower Stiction, Longer Life! It doesn’t get any better than this!

• Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
• Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
• Triple-lip seal design
• Dyno-tested to last 3 to 4 times longer than OEM seals
• Directional ribs allow seal to be installed easily
• Kits include fork seals and dust wipers

• Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
• Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
• Triple-lip seal design
• Dyno-tested to last 3 to 4 times longer than OEM seals
• Directional ribs allow seal to be installed easily
• Sold in Pairs

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.

These springs are custom wound specifically for the KLR250. Stiffer than the stock springs, these will make your front perform significantly better. Combine them with the Cogent DDC's and you will be very happy with the results.

Sold as a pair .42 kg/mm.

These springs are custom wound specifically for the Kawasaki KLX's. Stiffer than the stock springs, these will make your front perform significantly better.

These springs are custom wound specifically for the XT225. Stiffer than the .36 kg/mm stock springs, these will make your front perform significantly better. Combine them with the Cogent DDC's and you will be very happy with the results. Sold as pairs.

These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. No disassembly of your forks, no drilling of damper rods. Just change the oil to 5w and install the DDCs under the springs and hit the trails.

Stiffer fork springs are required to realize the full benefits of the DDCs. Please call if you have any further questions.

The DDCs are not recommended for use with progressive springs.

The DDC Install/Removal Tool which makes installation that much easier.

These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. No disassembly of your forks, no drilling of damper rods. Just change the oil to 5w and install the DDCs under the springs and hit the trails.

Stiffer fork springs are required to realize the full benefits of the DDCs. .42 kg/mm springs are the springs recommended for just about anybody out there. Please call if you have any further questions.

The DDCs are not recommended for use with progressive springs.

The DDC Install/Removal Tool which makes installation that much easier.

Damping Rod style forks are notorious for being too harsh, too mushy and too easy to bottom. Gold Valve Cartridge Emulators remedy this problem by controlling the compression damping with a tuneable valve. The Emulator sits on top of the damping rod and is held in place by the main spring.

Simply put; Emulators make damping rod forks perform like well-tuned cartridge forks. Installation and tuning for any condition or rider preference is very straight-forward. 

Simple to install and completely tunable for all conditions and rider preferences.

• Each kit contains the bearing and all of the seals, spacers and pins to rebuild the shock bearings to factory specifications
• Constructed from OEM quality components at a fraction of the cost

Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Model Specific, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.

Features:

• Two mounting points provide secure protection
• Full wrap guards
• Heat treated aluminum backbone bars
• Easy installation
• Compatible with all Barkbusters deflector guards (not included)

Add Plastic Handguards for a complete kit.

New design gives you more protection and uses OEM mounting points for easy installation.

• Made from 4mm thick aircraft aluminum
• Oil drain hole for easy access
• All mounting hardware included

In the event of a crash or even just a dropped bike, these heavy-duty crash bars will prevent major damage.

The powder coated 1" steel tubing is bolted to the sub frame of the bike with two attachment points on each side, preventing them from rotating in the event of a low side.

The guards also feature aircraft grade aluminum plates that can be inexpensively replaced without needing to purchase a new set. Think of them as protection for your protection.

They use highest grade commercially available 12.9 (177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Most skid plates will require notching or modification to avoid interference.

  Will not fit properly with oversized head pipes.

• Durable 6061 aluminum with blue anodized finish and laser engraved logo
• Used to push the tire bead down into the drop center of the rim on off-road wheels while using tire tools to change tires
• Hooks over spoke and pushes bead down on opposite side of tire from tire irons
• No more fighting to keep bead down while installing off-road tires

No Toil air filter to replace the stock unit. Fits the stock airbox using the standard guide and frame. It requires foam filter oil to properly trap dirt particles. Don't forget the Evolution Air Filter Oil kit from No Toil.

Here's a UNI dual layer foam air filter element for the KLX230. Needs to be treated with air filter oil like any other foam filter.

• Designed to fit in the factory air box exactly like original filter
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

• Fits directly into OEM airbox with application specific Sealing Bead to ensure a precise fit
• Fuel-management modifications are not required for increased performance
• Pleated media provides a large filtration area offering long service intervals
• Designed to provide increased performance
• Made in the U.S.A.

• Multi air filter intake increases airflow, improves filtering efficiency and raises the engine's output performance
• High-quality foam filter is easy to assemble and disassemble
• Suitable for long-term use with repetitive cleaning

Twin Air Filter's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.

An air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air- the number 1 filter system proven on motocross tracks around the world.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow

Twin Air's high quality materials and superior construction deliver unbeatable performance and protection. The hands-down choice of more World and National Champions than all other filters combined.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles without restricting airflow.

Perfect for Dirt Bikes with a stock engine using the stock airbox, air filter, and pipes.

Stage 1 Jet Kits are engineered to improve throttle response and deliver approximately 5% more horsepower than stock.

These kits are fully adjustable to allow the use of well-designed aftermarket pipes and stock replacement air filters, like K&N.

• Dynojet jet kits provide a simple and affordable solution to carburetor tuning problems
• Kits increase power and smoothness throughout the rev range while maintaining optimum fuel economy

This kit includes all necessary components to repair your carburetor.

O.E.M. jet sizes are included in the kit.

• Sintered Pads are best for regular riding. Long life, and good performance in all conditions
• Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand

• Sintered Pads are best for regular riding. Long life, and good performance in all conditions
• Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand

• The "HH" friction rating is the highest in the industry
• Provide maximum brake effect
• Lasts twice as long as organic pads

Sintered Pads from EBC provide great performance in all conditions yet still give you long pad life. Front pads are double H rated for maximum breaking. Rear shoes offer maximum durability and excellent braking performance.

Reduce exhaust leaks with this new exhaust gasket. This gasket goes between the header pipe and the cylinder head.

We recommend Anti-Seize on exhaust fasteners.

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now and avoid having an exhaust leak after you install your new exhaust.

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.

This beautifully shaped exhaust perfectly matches the Monkey’s unique character. The twin conical mufflers are constructed from stainless steel and feature titanium sleeves. Offers power gains throughout the entire rpm range along with a reduced weight. The sporty but classic appearance can be further enhanced by adding the specially designed carbon fiber heat shield.

The Hi-Output Slip-on gives the bantamweight Monkey a heavyweight punch with a deep throaty growl and a beautiful stainless brushed finish.

• 3/4 System; Mid-pipes and muffler
• CNC Machined Billet end cap
• Laser engraved logo badge
• Laser-cut chassis cover
• 3 lbs lighter than stock

• Offers an upgrade to a full system when used with the Akrapovic slip-on exhaust system
• Let your bike stand out with more power, a beautiful design, and the unique Akrapovic sound

Replacement Carbon Fiber Heat Shield for the Honda Monkey made by Akrapovic for their Muffler

• Yoshimura's full system max HP is up 7.3% as well as max torque being up 3.1%
• With a custom end cap featuring a titanium tip, a special inner core baffle, and an integrated heat shield, this little guy delivers style, performance, tone and fun!
• Includes an 18mm O2 sensor
• Yoshimura RS-3 Stainless Full System weight: 5.5 Lbs. vs Stock Full system weight: 11.2 Lbs.

• Manufactured to exact measurements to meet or exceed oem specification
• Tempered steel wire housing with an inner nylon sleeve for long life & smooth operation

• Handy, compact kit for on-the-go emergency throttle, clutch and brake cable repairs
• Includes 2 different diameter 6.5 long inner cables and an assortment of cable ends

Handlebar mounts that replace your stock clamps.

These raise your handlebars 1 inch.

Choose 7/8" for standard handlebars or 1-1/8" to allow installation of your choice of oversize/ tapered handlebars.

The elegant, open-end design makes these heated grips both stylish and functional. Highly efficient design, delivering warmth faster than traditional heated grips. Five-level temperature controller adjusts the grips accurately to avoid overheating. Specially selected rubber material resists the outdoor environment and provides a secure and comfortable grip. Even at high-temperatures, the grip remains resistant to damage. 

• Removable end caps allow for use as open-ended grips when needed
• For twist throttle applications
• Note: 12-Volt DC applications only.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.

The Folding Bar End Mirror has a beautiful case mirror backing plate and the arms are one-piece, eliminating screws and mirrors vibrating loose. The nylon swivel allows just the right amount of tension to be maintained for easy adjustment. 

Features and Benefits:

• Stem Length: 2-1/2 in.
• Fits 7/8 in. handlebars only
• Black
• Sold in pairs
• 3-5/16 in Dia. x 9/16 in Dia

Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.  

These are genuine factory Yamaha replacements.

This USB device connects to a battery cable with an SAE connector just like the typical Battery Tender outlet, and allows you to charge your electronic devices. Input is 12 Volts, with an output to the USB port of 2.1A maximum, perfect for your phone or other USB devices.

The Optimate Cable O-20 is a SAE weatherproof bulkhead/panel mount power source. Main body fits a 1" dia. hole. Overall length of the unit is 12" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors. We also offer an optional stainless steel bracket that you can bolt on wherever you like. This makes a clean installation and you won't have a charging cable hanging loose.

Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead for when you don't have something plugged in. Unit has a 3-year limited warranty.

Don't have an SAE plug attached to your battery? Choose the add on below.

Features:

• Rear rack comes with grab bars, designed for specific models
• Flat surface with many fitting holes for cargo box and its box base installation
• Comes with loading hooks for secure luggage holding
• Can be used as grab bars for passenger
• Can be used with GIVI universal box bases
• Maximum loading capacity is 5 kg / 11 LB

Features:

• Prevents saddle bags from getting caught by rear wheels
• Made of steel 16mm durable pipe with black powder coat finish
• Can be used with DRC Touring Carrier (Cargo Rack), comes in left and right supports
• Maximum loading capacity is 5kg / 11 LB per one side support

• Rear rack comes with grab bars, designed for specific models
• Flat surface with many fitting holes for cargo box and its box base installation
• Comes with loading hooks for secure luggage holding
• Can be used with GIVI universal box bases
• Maximum loading capacity is 5 kg / 11 LB

The HelmetLok cable is coated, to protect your helmet and bike. Small and compact enough to fit in your pocket, jacket or on your belt loop. HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point. A 'T' Extension is included if you need additional space between the lock and your helmet, and for helmets with quick release buckles.

Don't be weighed down carrying your helmet around anymore. Just use the simple to operate, carabiner-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy security and freedom with a HelmetLok.

These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hook - tie down straps.

ROK Straps are a two-piece strap with a quick-release buckle in the middle and loops on each end. One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around your frame, rack or other secure point and then back through the loop in the end making for a very secure mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap until your load is firmly held in place.

New design gives you more protection and uses OEM mounting points for easy installation.

• Made from 4mm thick aircraft aluminum
• Oil drain hole for easy access
• All mounting hardware included

Replacement Halogen bulbs for mini style turn signals. Sold in a pack of 5 bulbs.

• Eliminates the need to cut and splice wiring when using aftermarket turn signals or marker lights
• Plug into the OEM turn signal plug and then use bullet style connectors used on aftermarket lights
• To verify proper fitment, compare connector photos to OEM connector
• Sold in pairs

These signals have short rubberized flexible stems and bright mini halogen bulbs.

• Ministalk Marker Light V-Shape - Black/Amber
• Size:  2-5/8"
• Single-filament bulbs
• Sold in pairs

Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.

White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.

Dazzling bright Amber blinker functions. 

Everything comes in a spring-loaded stock designed to keep it safe from those unexpected tip-overs, crashes, or encounters with brush and trees. They’re flexible enough to bend 360 degrees, yet tough, durable, and almost impossible to break!

If you have a single indicator light for the blinkers that is not built into the display and is not LED you will need the diode kit (AKA DR650) If it is built into the speedo display it should not require the diode kit.

Available in a generic kit with Bullet connectors supplied. Great for your DR or almost any other bike with a single post blinker setup. These will work well on bikes that use a flasher, but you might have to add the female side of the connectors that are included in the kit.

Not for Yamaha T7, see model specific listing

Yoshimura has always been synonymous with quality craftsmanship, precision fitment, and impeccable quality. The Fender Eliminator Kits are no exception, and they are sure to give your motorcycle the sleek race look that every rider craves

Features:

• Precision laser-cut stainless steel bracket tucks discreetly under the tail section of the motorcycle
• Black anodized CNC machined light housing with laser-etched Yoshimura logo
• Light housing contains four bright LED lights
• Black anodized aluminum license plate frame with silk screened Yoshimura logo
• Stainless steel hardware included
• Compatible with aftermarket turn signals when combined with YOSHIMURA TURN SIGNAL BRACKET (turn signals not included)

High Quality Replacement Wheel Bearings and Seals for your TTR125 with disc brakes.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Steel wheel weights replace the old lead ones that are no longer legal in some states. Mount up new tires and make sure they are balanced for a smoother ride and longer tire life.

This is a 60 piece pack, 1/4 oz. weights with adhesive backing.

• Super economical roller chain
• Standard chains have two-point pin riveting
• Special steel alloy, solid roller and pre-stretched, shot-peened parts
• Comes with clip-type master link

• Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
• Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
• Triple-lip seal design
• Dyno-tested to last 3 to 4 times longer than OEM seals
• Directional ribs allow seal to be installed easily
• Kits include fork seals and dust wipers

The One-Piece Comfort seat is 11” wide and designed to improve weight distribution and support when seated while still allowing the rider to move freely when standing. Built to withstand the rigors of adventure riding, the T7 One-Piece Comfort seats are designed with the rider in mind.

Available in multiple cover options and three different heights: low, standard, and tall. Whether you have a 26” or 36” inseam, Seat Concepts has you covered.

 Available as a complete seat only, including seat pan. 

Engineered with precision and hand crafted with premium materials including Seat Concepts’ proprietary foam formula, the 8” wide One-Piece Rally seat is designed to provide you with an open cockpit for increased mobility during technical riding. 

Available as a complete seat only, including seat pan. 

Engineered with precision and hand crafted with premium materials including Seat Concepts’ proprietary foam formula, the 8” wide One-Piece Rally Hard Adventure 2.0 seat is designed to provide you with an open cockpit for increased mobility during technical riding and traction ribs to help keep you planted.

Available as a complete seat only including seat pan. 

Seat Concepts seats are constructed using a foam material that is higher quality than OEM seat foam. Their proprietary formula is more plush, while still offering the necessary amount of support. Their unique comfort and shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These great features combine to offer you a custom seat feel, and provide greater enjoyment and increased range for long commutes, or Dual-Sport ride!

The Complete Seat comes with an high quality aftermarket seat pan with the foam and cover kit assembled, ready to ride!

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam.  On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life.  Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

Available as a Foam and Cover Kit for OEM pan only.

RotoPax holder made to mount a single Fuel and/or Water container.

This unique design adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Features:

• Wider, lighter, stronger design
• Widest (mm) and lightest pivoting pegs on the market
• Upgraded heavy duty, long life springs
• Unique multi-directional grip pattern
• Outstanding build quality
• Lifetime Warranty*
• Made in USA
• Expanded motorcycle fitment range
• Overhaul kit includes: 2 pivot bushings, 2 pivot tension springs, 2 lock nuts, 2 washers, 6 o-rings, 2 split pins and instructions

7" wire twisting pliers with return spring mechanism for easy and safe wire twisting.

Need to remove your clutch assembly to get at that dreaded neutral safety switch? This holder is the quickest and easiest tool out there to get a grip on that hard to handle hub. Laser cut to the exact pattern that EBC makes their clutch plates from, it makes loosening and re-tightening the clutch nut easy. All of that and no worries about doing any damage to your expensive clutch hub.

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 149° to 248°

Higher pressure in the cooling system, raises the coolant boiling point and increases protection from coolant loss due to overheating.

23 PSI - 1.6 Bar.

A high quality torsion spring puts more consistent force on the tensioner lever. Requires drilling a small hole in the case to seat the spring. Drill bit included.

Eagle Manufacturing balancer lever kit, featuring top-quality components.

The Eagle Manufacturing idle-shaft lever and spring is designed to replace the less durable stock unit. The one-piece lever is precision machined from 17-4PH hardened stainless steel, ensuring exceptional strength. The kit also includes a stainless doohickey and a torsion spring with a drill bit, replacing the previous extension springs with a superior torsion spring for enhanced durability.

A direct replacement for the stock KLR hoses that tend to crack and leak after a few years.

These silicone hoses are custom made for us. Silicon hoses operate at much higher temperatures and pressures than other rubbers, they don't perish, and they look great!

Our very own version of the popular thermostat bypass for the KLR. Gives faster warm up and more constant engine temperatures. Eliminates the wildly fluctuating engine temperature gauge. A more controlled and constant temperature is easier on your piston and cylinder and may prevent or reduce oil consumption. We use a 180 degree thermostat instead of the stock (too cold!) 160 degree unit. Warmer coolant temperature promotes better fuel vaporization and can increase fuel economy.

Our bypass system mounts the new thermostat in a small billet extension housing right where the stock thermostat is now. There is no bulky external housing to hang off the motor. The bypass hose tees in to the lower radiator hose using a length of quality high temperature silicone hose. It all makes for a clean simple installation.

The complete Thermo Control package - Our in-house designed Thermostat Bypass kit, a set of Custom Silicone Hoses and a Hi-Pressure Radiator Cap. All combined to help your KLR cooling system be at the top of its game. The Thermostat Bypass kit includes a thermostat with a higher temperature rating that will keep the motor more in its happy spot.

The Silicone hoses are stronger than the stock rubber units and will better resist cracking and leaking.

Complete set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height. Built with swaged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging". Anti-swell, alloy impregnated heavy-duty cork-based facings for smooth clutch take-up. Allows modulation, unlike paper clutches which tend to snatch.

The Rekluse EXP employs the same EXP assembly as their premier product; the difference is that it fits into your stock clutch assembly, saving you money! Now you can enjoy the benefits of Rekluse auto-clutch technology on your KLR.

An auto-clutch automatically feeds out the engagement of the clutch using centrifugal force. This allows you to start and stop without touching the clutch lever. The automatic feed is fully adjustable to suit the rider's needs while retaining full manual override with the clutch lever. This automatic feed delivers easier on/off throttle transitions, improved traction, better control, and more confidence.

Generator cover gasket to seal up the cover once you have your new Doohickey in place. New OEM gasket. What else can we say? If in doubt, put in a new one.

A Suzuki OEM gasket for the Cam Chain Tensioner. You are going to need it if you work on your starter motor. It is not a good idea to re-use this gasket. If it blows out, it will dump a large amount of oil onto your right foot.

K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.

This kit fits KLR650 87-18 as well as other brands and models , please verify correct size for your model before purchase.

A pair of stage 2 intake and exhaust 'drop-in' camshafts. Great mid-range and top-end increase. Uses stock valve springs. Modifying the airbox and rejetting will be required to realize power improvements with these cams. These are new billet cams - No core return required!

Providing unbeatable performance and exceptional value, Hi-Flo Filter is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

Grab our 5-pack and save both time and money!

Clymer motorcycle repair manuals are written specifically for the do-it-yourselfer. Whether it's routine maintenance or more extensive repairs involving engine and transmission disassembly, Clymer repair manuals provide all the information you need about your motorcycle. With step-by-step procedures, detailed photography and extensive use of exploded views, each manual is based on the complete disassembly of the machine. Unlike OEM manuals, which are purposely designed for the professional technician with an impressive array of specialized tools, equipment and knowledge, Clymer manuals are designed for the first-time user.

The DR650 manual features 278 pages of color wiring diagrams, illustrations and photographs. There are 15 chapters, ranging from general information and troubleshooting to brakes, suspension and full color wiring diagrams.

The genuine factory shop service and repair manual. This is the reference manual Suzuki dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your DR650.

A professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.

Includes Tips 5.1, 5.6, 5.8, 6.1, 6.3, 6.5, 6.7, 6.8, 6.9 and Spline drive.

Always wanted to build or true your own wheels? Maybe just be able to balance your wheels after changing tires. This stand is perfect for both of those tasks.

• Features a bubble level to balance wheels correctly the first time
• Steel plate construction for durability and stability
• Comes with shaft, cones and spacers to fit just about any wheel

The Stash Box is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, lockable, vehicle styling is unaffected, and easy accessibility.

• Sized to work with all standard size license plates as well as the current Wisconsin and Ohio plates
• External Dimensions: 7" x 4" x 1" plus 1" on the width for the lock
• Made from molded polypropylene
• Includes all mounting hardware, retention pouch for paper documents, foam insert, lock and two keys

Molded using a very durable, lightweight 1/8" thick polycarbonate - giving the windshield a high impact strength and making it shatter-resistant with a superior light transmission quality. Mounts quickly and easily onto the stock headlight cowling for a clean factory look. Drilling of the cowling is required, hardware is included. Removal for trail riding is also quick and easy.