Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.

Yamaha

Electrical

A digital voltmeter that can be mounted almost anywhere, on any bike, thanks to ProCycle's multi-position stainless steel bracket. Keeps you informed on the status of your charging system. Completely waterproof and comes with connectors, wires and thorough instructions. A "must have" device for riders who use heated riding gear, heated grips, additional lighting, GPS, etc.

$49.95
  • Compact, adhesive back
  • Easy-to-read display
  • Flashing low voltage warning
  • Measures 1.57" diameter x .43" D
  • Effective temperature range: 14 ~ 140 °F
$39.95

Deltran quick-connect plug with LCD voltmeter display. Plug this into your Battery Tender, or any SAE cable, for an LCD display of the battery voltage. Three LED lights indicate the state of charge as well.

Add Charge Ring Connector
$16.95

Lighting

  • Nylon surrounding, removable polypropylene number plate, polycarbonate reflector, cast aluminum headlight body, clear polycarbonate lens cover and tempered glass lens
  • Spotlight uses 55W halogen bulb; floodlight uses 55W halogen and 5W incandescent bulbs
  • DOT and SAE compliant
$149.95
  • Features an innovative design; made of polypropylene
  • 10 bright white LED bulbs ensure visibility at night and high illumination while using low power consumption
  • LEDs can be used as turn signals and will not heat up after prolonged use
  • 12V 35/35W H4 bulb with LEDs; total wattage is 50
  • Universal fitment with anti-vibration rubber straps
  • Position of mounting points allow ample room for brake line/cable
  • Universal mounting strap included
  • DOT-ECE-SAE-TÜV compliant
Choose Color
$149.95

Designed specifically for aggressive night time riding by combining amazing distance projection, wide peripheral spread and a smooth blend of near field light. Utilizes four Cree™ XM-L2 LEDs, the brightest, most efficient LEDs on the market giving you a blinding 4,900 lumens and 40 watts.  The Squadron® Pro is plug and play when installed using the Skene Dimmer kit making for an easy install.

Add the Skene Dimmer Kit to control the brightness to match riding conditions.  Without the dimmer headlight is high beam only.

To run this kit on smaller bikes (below 400cc) you may need to have your stator rewound by Baja Designs.  An aftermarket stator can be purchased instead of a rewind. 

Choose Color
Add Dimmer Kit
$274.95

So you say you want more light for your dual sport? Give this 7"DOT legal Rally light a try and light it up like a freight train! HIGH/LOW operation and SAE/DOT/E4 approved. 
 This light does not have the large Cyclops logos shown on one of the images.

  • Race Inspired Design
  • Hella reflector, made in Germany  stamped SAE/E4
  • Lightweight Aluminum Frame
  • Plug and Play for Bikes with H4 Bulbs.
  • Available with optional mounting plate for computer or GPS
  • Easily converted to HID if desired, uses an H4 bulb
  • For bikes that are not H4 (XR650R), a simple H4 plug available at any auto parts store will allow you to use this light.
  • Now the panel on top of the light for mounting speedos/gps's etc is included, (This is a platform, not actual GPS mount.)


Optional 10.0 Lumen LED High/Low Upgrade  and now the Phoenix LED complete headlight for the ultimate DOT headlight
The stock lamp that comes with this rally light is great, but you can get  well over double the brightness  with the LED upgrade at a substantially lower power draw. Note if your bike is ac powered at the headlight you will need the rectifier for the LED option.. AKA carbureted KTM's CRFX and XR400/650.. others may apply.

$475.95

The IQ-275 Intelligent Lighting Controllers from Skene Design allow you to quickly and conveniently set the brightness of your Squadron Pro headlight to match riding conditions. Often auxiliary lights are too bright or have too wide a lighting pattern to operate at full power during the day or under certain road conditions. With Skene Design's innovative intelligent lighting controllers you can pre-program several different brightness settings and with the flick of a switch immediately select the desired brightness.

$89.99

Each 10 watt Solstice Solo produces 900 lumens, which is roughly equal to a 50 watt halogen bulb. These are one of the brightest LED off road lamps on the market. The rugged and compact 2” x 2” square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with other Solstice Solo pods. Includes stainless steel mounting bracket and waterproof connection. Choose narrow, medium, wide or elliptical light beam pattern. Our favorite is the Elliptical pattern which is wide and flat, putting most of the light where you need it the most.

Sold each.

Add RAM Light Mounts
$119.95

A game changer in compact auxiliary lights. High output, compact and lightweight!  

The New Cyclops Aurora 2 inch lights rated at 4000 lumens for the a set. Using an authentic top binned Cree XHP50 emitter these lights pack a punch!

Available with or without the daytime Running light option (DRL) which can also be a front blinker. (you may need a led flasher to do that)  

Like all Cyclops lights we only use the Best Real Cree emitters. R113, R10 TUV and Emark certified  IP68 rated.

Includes a full relayed wire harness designed for a Motorcycle.  No need to use a switch if running the DRL version, also no need for a switch if using the skene dimmer or want the lights on in high beam and off in low beam. The factory switch will work for these applications. Unless you have a  LED factory headlight in a R1200gs,850Gs or KTM1290 these bikes will require our Raider canbus controller.

Look at these quality features!

  • Solid Steel cradle mount. No broken or cracked mounts!
  • CNC machined aluminum housings 
  • Polycarbonate lenses, Break-proof! 
  • 15 degree beam patterns, a great choice for distance and field of view.
  • 19 watts each 
  • 2000 lumens a piece, 4000 lumens for the set.
  • Includes a relayed wire harness 
  • Input voltage 9-30VDC 
  • R113, R10 TUV and Emark certified
  • IP68 Rated
$225.00

Now a lifetime warrantied LED light set at a budget friendly price.. and Not made in China. 

The new Cyclops Pegasus led light set comes complete with a high quality relayed wire harness and a potent combo light beam pattern. 

We are able to offer this fantastic light at a great price due to a one piece optic and sealed beam construction, eliminating extra parts and creating a very durable and high performance light.

These lights feature Cree 3 watt emitters for amber and 7 watt emitters for white with two 10 degree and two 25 degree optics, Good for 400 plus ft of lighting (white).

This combo beam pattern offers good forward lighting and extremely good conspicuity. 

The light set is available in white 5600K or a extremely bright Amber, perfect to allow those autos to see you. Lightweight and robust at 2.75 inches with a single stud mounting, they fit just about anywhere you would like to mount your lights.

Specs:

  • Canbus compatible, full relayed wire harness included
  • 5000 plus lumens for the set
  • 28 watt draw per white light, 12 watt draw per amber light
  • ISO 67... waterproof
  • 5600K (white 33% brighter than Amber)
  • Life time warrantied
  • Sold as a pair
$249.95

The little light that can! Don't be fooled by the mini size, big light comes out of this bad boy.

New design for 2020 featuring smaller switch, metal handle bar mounts and options to allow this light to work for many applications. Redesigned cases, cords, strain reliefs and optics for optimal water resistance, ruggedness and performance.

It uses a go pro type mount with an aluminum platform to mount almost anywhere. Also included is a handle bar mount (mount on center of bars).  No plastic parts on the light head.

Included is a rubber handle bar mounted switch with 2 power level settings and a strobe pattern.

Combo beam pattern, spot and wide beam in one light.

Compatible with Go Pro mounts, Perfect for modern EFI bikes.

  • basic wire harness
  • 3500 lumens 
  • Spot and flood beam in one light
  • 25 watt power draw.
  • 2 year warranty, does not include crash damage.
  • 4 inches long by 1.350 high
$179.95

The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. This mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

This is for Mount Only.  Sold individually.

10 Watt LED lights sold separately.

$39.95

Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.

Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.

Installation is quick and easy.

*Please note All colors other than amber and white are recommended for off road use only*

$34.95

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

$29.95

License plate light with 3 LEDs. Very compact and easy to mount. Meets plate illumination requirements with super white light.

This is for the LED license plate light ONLY.

$17.95

License plate bolt with bright white LED light. The simple way to light up your plate.

Choose Qty
$12.95

These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long.

  • Sold in pairs
  • Requires LED flasher unit
  • Bikes with a single dash indicator require a diode kit

 

Add LED Flasher
Add Diode Kit
Add Turn Signal Minder
$29.95

The Barkbuster LED Indicator Lights for Jet, Storm & VPS Plastic Handguards to increase your visibility and safety using 15 high intensity LEDs that mount directly to the plastic handguard shells. Super bright auxiliary signals will make your directional intentions clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.

Features:

  • High intensity LEDs with amber lenses
  • Intended for use as indicators/turn signals
  • E mark approved for use as an indicator light
  • 15 LEDs per indicator amplifies your visibility to other traffic
  • Enhances safety by imrproving clarity of planned directional changes
  • Very efficient performance with low power draw
  • Designed for use on the upper surface of Barkbusters Jet handguard plastics
  • Compatible with the upper and lower surface of VPS & Storm plastics

What's in the box:

  • Barkbusters LED indicators in amber (pair)
  • Mounting materials
  • Installation instructions

Please Note: Not compatible with the electrical system on the Honda Africa Twin CRF1000L

Choose Color
Add Resistor Set
$69.95

The Click'n'Ride signals are the quick release turn signals we have all been waiting for. The turn signal base socket will be mounted and wired to stay on the motorcycle. Each turn signal is equipped with a quick release bayonet which easily presses into the mounting socket. This kit is perfect for making a quick conversion from a road-going dual sport to a trail-ready dirt bike.

Features:

  • Vibration-proof components
  • Easy fit sockets
  • Quick release Bayonet
  • Seamless ultra-sonic sealed lens (dust and waterproof)
  • 3D lens optics
  • Philips LED's
  • Moisture, mud & dust guard

Includes:

  • 1 quick release indicator – LEFT hand indicator
  • 1 quick release indicator – RIGHT hand indicator
  • 2 Sockets with Moisture Guard and wiring (bullet ends)
  • 2 nylon spacers (1mm)
  • 2 nylon spacers (2mm)

*Please note: LED turn signals require an LED flasher,

*Bikes with single dash indicator require a diode kit,

*If using a combination of conventional and LED signals then a resistor is required.

Add Storage Pouch
Add LED Flasher
Add Diode Kit
Add Resistor Kit
$79.95

Don't be fooled by thinking these are the same as the others, they may look similar but are far from it in terms of reliability, function, ease of installation, product support.

Now easily turn your blinkers into additional running lights and or brake lights(rear) for added visibility.

Bright white light in the front and red in the rear. You can select to run the rear red as brake lights or red running lights. If ran in brake light setup the red brake lights will come on sequentially flashing twice then go to solid red!  Be Seen!

Dazzling bright Amber sequential blinker functions. 

All in a Extremely rugged rubber stock to help prevent damage from a tip over or impact with brush, trees etc. Bends back 90 degrees or more.

A generic kit with Bullet connectors supplied. These should work well on most brand bikes, but you will have to add the connectors that are included in the kit.

For Yamaha T7 please choose model specific kit.

Deletes flasher, jump cord included, No need to purchase led flasher units! Your indicator light on dash may not blink with this kit, it will activate, but remain solid. Adding a LED flasher will keep the indicator light flashing.

Set of 4

Cyclops builds these in house as fast as they can, parts are usually in stock and orders are filled asap, it may take 5-10 business days for an order of these blinkers to get out our door.

Thumbnail

Notice: Does not fit 1st Gen KLR (87-07), will require mounting bracket.

Add Diode Kit
$119.95

These signals have short rubberized flexible stems and bright mini halogen bulbs.

Choose Pack
Add Replacement Bulbs
$29.95

You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.

The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.

Thumbnail

  Not for any DRZ400

$29.95

The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights.

Features:

  • 10 OHM
  • Intended for Barkbusters LED Indicator Lights
  • Corrects flash rate of LED signals
  • Flash rate: 90 (+/- 30) times per minute
$13.95

This devices allows any two wire after market LED turn signal indicators to operate as running lights (always on), and will blink on / off when the turn signal switch is activated. It is highly recommended to use this product with the Fixed Rate Turn Signal Flasher. Each package contains one dual adapter, good for operating both turn signals, left and right, with the appropriate kit. Please order the Front kit to turn the FRONT flashers into running lights and the REAR kit to turn the rear flashers into running lights.

Universal type comes with bullet connectors to wire in manually. Works with any two wire aftermarket LED turn signal indicators.

Choose Location
$35.95

Installing new turn signals or brake lights and need to find the 'HOT' wire, or are you just trying to find out if a specific wire has power going to it? Either way, this test light can help you locate shorts, open, and voltage on 12-24 volt DC circuits.

$12.95

Frame

Inexpensive way of getting the factory look.  Adds 1/2" of width to any standard foot peg. These will give you a much more stable platform when standing on the pegs.

Sold in pairs.

$29.95

Not your average rubber insert! These rubber covers go over the top of your MK3 or MK4 Pivot Pegz so that the aggressive teeth are only exposed when you need them in muddy conditions.

  • Unique, innovative design
  • Wide flat platform
  • Openings allow mud/dirt to pass through
  • Easy and quick to get on/off
  • Good grip
  • Reduced vibration
  • Extra comfort

Important to verify which style Pivot Pegz you have before ordering.

Choose Peg Style
$29.95

The easy way to remove your steering bearings without damaging them. Remove all tapered bearing races from 47mm to 52mm OD. Tool uses a precision machined anodized aluminum cup that will not damage the seal surface while hardened steel jaws securely engage the inner lip and pulls the race out perfectly straight causing no damage to the race or frame. Motion Pro includes a limited lifetime warranty.

$59.95

Drivetrain

Always carry a spare master link when out on the trail.

Thumbnail

  Important! Master links are not interchangeable. Be sure to check the manufacturer and series on your chain.

Thumbnail

  These do not fit the TW200.

Choose Pitch / Type
Add Master Link Pliers
$5.95
  • Accurately and quickly measures chain slack
  • Two scales measure both chain slack and chain to swingarm clearance
  • Setting chain slack properly dramatically improves chain life
  • Lightweight compact design fits easily in your tool box or road kit
  • Works on most street and dirt bike applications up to 75mm chain slack
  • Made from engineered nylon with aluminum measuring scale
  • Anodized laser-etched precision measuring scale
  • Refer to your owner's manual for proper chain slack and procedure
  • Patent pending
$19.95

Designed for quick and accurate alignment, this tool clamps squarely to the rear sprocket so the alignment rod can indicate sprocket alignment with the chain.

$18.95

Can break or rivet chains from #35 to #530 like a pro.

kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.

kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.

NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.

$74.95

Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.

Thumbnail

  Note! The head of the pivot pin you are going to remove must be ground down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!

$16.95

This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance and life of the chain, sprockets, and the engine. This brush will fit any 400 or 500 series chains.

$12.95

Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes
$13.95
  • PBR = press, break, rivet
  • Innovative design will press, break and rivet 520, 525 and 530 chains with one convenient tool
  • Versatile design will remove chain pins, press master-link plates and rivet hollow nose and soft nose (quad stake) master link pins on O-Ring and non O-Ring type chains
  • Easy-to-use design allows you to change tool functions by simply moving the position of the anvil block
  • Indexing letters on movable anvil and body ensures correct tool configuration; simply line up the letter on the anvil to the letter on the body to get the configuration you need
  • All components conveniently store on tool when not in use
  • All steel construction with heat-treated components for strength and durability
  • May be supported in a vise or held with included handle
  • Great for the professional technician or DIY mechanic
  • Compact and light enough to carry in a tool bag for trail-side repairs
  • Patent Pending
$104.95

Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.

$19.95

This Motion Pro press tool is a must have when installing and removing Clip-Style master links (520, 525 & 530 sizes).

Easily presses on and off master link plates, works on 520, 525 & 530 Clip-Style master links.

Maximum master link width 24.8mm.

Will not damage master links, hardened steel pins for reliable use.

Light weight billet aluminum construction.

$32.95

A high quality master link press tool from Wirth Machine used for the removal and installation of master links using a press fit link plate.

Fits 520, 525, and 530 pitch chain.

$36.95

ULTIMATE SPROCKET WRENCH KIT

  • 12” long wrench gives you more torque to get those thread locked sprocket bolts off easily
  • Double ended 12mm & 13mm to fit all modern motocross, Enduro and dual sport bikes
  • Dog leg wrench design allows wrench to easily clear rim edge and wide tires
  • 8mm allen fits most Japanese bikes 8” long for extra leverage
  • Torx T45 fits late model KTM and Husqvarna bikes, 8” long for extra leverage
  • Vinyl coated handles to protect rim edge and give a non slip grip
  • Makes routine sprocket bolt maintenance a quick and easy job
$19.95

Brakes

This brake bleeder makes bleeding your brakes a one man job.

The unique check valve allows fluid and air to escape while preventing air from re-entering the system.

Add Brake Fluid
$14.95

Combines wrench and bleeder valve into one convenient and compact tool

  • Fits most 8 mm bleeder nipples
  • Bleeds brake systems and hydraulic clutch systems
  • Internal check valve for fast easy bleeding
  • Anodized billet aluminum handle with chrome moly steel body
  • Compact size for tight spaces
  • High quality internal seal
  • Multi position handle
Add Brake Fluid
$28.95

This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.

Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.

$28.95

Suspension

Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.

The three forces of suspension, testing procedures, even the black arts of chassis geometry: Thede explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.

$34.95

Having the proper fork oil level is imperative to the handling of your bike. Setting the correct fork oil level is a snap with this fully adjustable gauge. The adjustable aluminum level plate can be set from 0 to 295mm. The oil reservoir has single milliliter markings up to 60ml.

Being able to accurately tune your forks by adjusting the oil level can make them better resist brake dive or bottoming. Oil level should be thought of as a fine tuning method to make your choice of spring rate work perfectly for your bike.

$19.95

Showa removed the schrader valve on many newer rear shocks. Now you need a needle to recharge your shock with nitrogen after a rebuild. Race Tech built this unit just for that job.

$32.95

The features of this tool include 300 psi capacity, bleeder valve and T-handle plunger pin chuck. Swivel chuck has a 12" flexible hose. Comes complete with instructions, carrying box and Schrader valve extension (required on some Showa shocks). Nitrogen bottles available at any welding supply house.

$228.95

Exhaust

  • Reduce exhaust sound by one to six decibels
  • Works with DG V2 mufflers
  • Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
  • Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
  • Each size is sold separately

Perforated W/ Block off Plate

(Gen2 O Series has Black Tip similar to V2)

$39.95

This Quiet Insert comes stock in all new FMF Q4 mufflers. If you lost yours, this is the replacement you need. It will fit Q4, Q4 Hex, Powercore and Powercore Hex mufflers. It will reduce the sound rating of the Power Core models, from about 99db down to about 96db.

Add Lubricant
$39.95

Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.

$33.95

The Chilly Exhaust Heat Shield is the most effective heat shield on the market. The innovative three piece design consists of a top shield attached to 2 rails with rivets and spacers. This reduces the contact area and slows down heat transfer. They have incorporated a patented, insulated reflective blanket on the underside of the shield to reduce radiant heat transfer. The included stainless steel clamp makes it simple to install. 

We highly recommend a heat shield if you run soft luggage without hard racks. 

FEATURES:

  • Solid Top Shield - The logo is laser etched and there are no cutouts on the top shield. This prevents radiant heat from passing straight through to your luggage.
  • Side Rails - By isolating these with spacers the heat conductive surface area to the top shield is reduced and slows down heat transfer.
  • Radiant Heat Shielding - The reflective insulated blanket on the bottom of the shield is the real hero. This patented material won't be found anywhere else in the motorcycle industry. 
  • Stainless Steel Clamp - Slots have been provided in the side rails to make installing as easy as it gets.
  • Brushed Aluminum - Lightweight and looks nice.

DIMENSIONS:

  • Length 7.5" (190mm) x Width 3.5" (76mm) x Height 1" (25mm)
  • Clamp fits any exhaust 3.5" - 5.5" (89mm - 149mm)
$38.95

Have you lost your stock heat shield, or need one on an aftermarket head pipe? FMF makes this nice unit that includes clamps, heat shield with the FMF logo and button head screws to hold it on. We recommend Anti-Seize on all exhaust fasteners.

Add Lubricant
$34.95

Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.

$29.95

This universal heat shield provides a great look at a great price.      

  • Fits all 1-1/2" - 2-1/8" Pipes
  • Measures 7-1/4" x 3"
  • We recommend Anti-Seize on all exhaust fasteners.
Add Lubricant
$39.95

The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal, and is easy to install.

  • Kits come in 2 lengths - 15" and 19"
  • Pillows can be trimmed to length to fit different mufflers.
  • Includes a cap stuffer to fill packable end caps.
Choose Size
$24.95

Re-pack your silencer with this pro-quality, three layer packing system and restore lost power and sound control.

Kit includes:

  • 60"x20"x1⁄4" glass mat.
  • 7"x20" stainless wool
  • 8"x20" stainless mesh
  • Twelve 3⁄16" rivets
$31.95

Replacement Exhaust Pipe Retention Spring

  • This swivel spring replacement will work on nearly any exhaust system with a similar spring.
  • Made from stainless steel, and has a high temp silicon sleeve to protect exhaust component finish.
  • Made by Akrapovic, 60mm size, SOLD EACH
$4.95
  • Available in 52mm or 58mm lengths
  • Kit contains two stainless steel exhaust swivel springs
  • Free-floating mounting hooks to avoid breakage
Choose Size
$12.95

Set your bike apart with a custom exhaust look. Withstands direct heat up to 2000°F.

  • 2 inches wide and 25 feet long
  • Available in black or natural
  • 4 stainless steel tie wraps
Choose Color
$45.95

Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.

$14.95

Precision cut from heavy gauge material.

Extremely durable design.

Push/Pull design for hard to reach places.

Soft but durable PVC coated handle.

 

$12.95

Luggage

The universal E-series adapter plate is designed to add a Givi Monokey topcase to most existing flat rear luggage racks. All necessary mounting hardware and installation diagram for attachment to generic tubular-steel flat rear luggage racks is included. This is a universal plate so making it work on your tail rack might need a little self engineering.

Typically installs quickly using simple hand tools. Mounts standard Givi Monokey topcases (ie E45 Elegant, E460 Delux, E52 Maxia), or the flat, stable surface can be used as a solid toprack when the topcase is not needed. Not for use with GIVI Monolock topcases. Made of durable molded nylon with a rugged black finish.

What's in the Box:

  • GIVI E251 Adapter Plate
  • (4) W-style Adapter Hooks
  • Mounting hardware
  • Installation instructions
$66.00

The Hardcore Soft Rack has been specifically designed for smaller bikes that have very little support in the back for luggage.

They have incorporated two 7075 T6 aluminum support bars that also work as tire irons to increase rear carrying capacity.

The tire irons are hand forged and have a Type III hardcoat anodizing. You will receive two silver anodized tire irons.

The Hardcore soft rack also integrates easy access pockets to store your tire irons and access them without unloading your gear.

Construction Features:

  • Heavy Duty Metal Cams
  • Rubber cam buckle covers to protect your bike
  • MOLLE Compatible Spacing
  • Heavy Duty Nylon Webbing
  • Integrated storage for support bars
  • 7075 T6 Aluminum Support Bars Double as Tire Irons
  • All Attachments Fully Adjustable
$169.00

THE LUGGAGE RIGGING POSSIBILITIES ARE ENDLESS!

This kit will set you up with the full Green Chile Adventure Gear treatment. You will be able to haul up to four bags of your choice. One system that can be rigged for day trips and easily scaled up for an expedition or extended trip.

No expensive bags required. Any bag becomes motorcycle luggage.

Don't have a rack on your bike? No problem! The flexible soft rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and you're ready to get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style contact points.

Contruction Features:

  • 1" Tubular climb-spec nylon webbing
  • Daisy loops along sides and rack surface
  • Heavy Duty cam buckles on each corner
  • Tensioner loops to keep your luggage secure as you travel
  • Ability to carry two bags on the back and two bags on the side.

This Kit Includes:

  • 1 Uprising Soft Rack Base
  • 2 Soft Rack Side Straps
  • 6 Cam Tension Loops
  • 2 Ring Tension Loops
  • 2 Ring Loops
  • 2 Six Foot Runner Loops
  • 4 Four Foot Runner Loops
$239.00

TIRED OF LOOKING FOR A GOOD PLACE TO ATTACH TIE DOWNS AND STRAPS?

The Green Chile Adventure Gear Uprising Soft Rack is all about adding mount points to your bike. It adds over 60 mount points to the rear and sides of your bike and its quick and easy to install and adjust. The Uprising Soft Rack can be used with or without GCAG accessories, but when you add the soft rack as the base of your luggage system and combine a few other GCAG accessories you will have the world's first customizable and modular luggage system. You will not find a more versatile system anywhere else.

Don't have a rack on your bike? No problem! The flexible Soft Rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style mount points.

The GCAG Uprising Soft Rack is the flagship Green Chile innovation. This unique product is compatible with just about any motorcycle and soft luggage combination that you'd care to throw at it. Adventure bikes, dirt bikes, and crusiers...the Soft Rack does it all.

Specifications:

  • 1" Tubular climb-spec nylon webbing
  • Daisy loops along sides and rack surface
  • Heavy Duty cam buckles on each corner

(patent pending)

$99.00

These turn signal relocation brackets from ProMoto Billet provide an easy way to move the stock turn signal lights, useful if you find them getting in the way of your luggage configuration.

These brackets may utilize an existing hole in some of the rack side brackets, though many applications will require drilling or fabricating in order to mount properly.

$15.95

The Scramble Rack is optimized for carrying luggage on the sides. The side straps provide plenty of mount points and the spacing is MOLLE compatible. The top mounting surface on the Scramble Rack is minimal and designed for small packs.

There are two versions of this rack. 

  • Enduro - Attaches in the rear with fender hooks.
  • Street - Utilizes a girth hitch in the rear. Works great with grab handles.

CONSTRUCTION FEATURES:

  • 1 Heavy Duty Metal Rings
  • 1" Heavy Duty Nylon Webbing
  • Daisy loops along sides and rack surface
  • 2 Heavy Duty Cam Tension Loops
  • 1 pair of NRS Cam Buckle Bumpers
  • Enduro model uses vinyl coated fender hooks in the rear.
  • Street model uses girth hitched side straps around the grab handles.

THINGS YOU SHOULD KNOW:

  • They recommend their Bag Snake Kit for rigging side bags.
  • Check to see if you need an Exhaust Shield.
  • Dry bags NOT included.
  • Fuel bottles and holsters NOT included.

Patent Pending

Add Bottle Holster
$59.95
  • Extremely versatile 4-liter rear Storage Pod is a great addition or alternative to the standard tank bag
  • Cleverly designed removable tray with three large zippered storage compartments and a large map pocket
  • Flatten or remove inner tray for one big storage compartment
  • Dense thermo-molded pod has sturdy double zippers and is covered with a durable canvas outside with a soft inner shell
  • Four web straps with coated hooks attach the Storage Pod to most bikes
  • Height: 6” front, 4” back (15.2-11.4cm)
  • Width: 12½” front, 9” back (31.8-22.9cm)
  • Length: 13¾” (35.0cm)
$199.95

This Trekker Top Case is manufactured from glass fiber reinforce polymers ensures high structural rigidity. An anodized aluminum cover is then placed over that to resist weathering. 52 liters in size, there is enough room for 2 helmets. Attaches to your favorite rack with a Monokey fixing system. Available in Aluminum or Matte Black.

  • Dimensions: 23.6"L x 18.1"W x 12.4"H
  • Volume: 52 Liter
  • Max Load: 22 lbs.
  • Helmet Capacity: 2
  • Weight: 11.44 lbs.
  • Color: Brushed Aluminum / Matte Black
  • Material: Polypropylene / Aluminum
Choose Color
$408.95

The Torrent Waterproof Bags from FirstGear were created to provide safe, waterproof protection for all your valuables. Made from tough PVC tarpaulin fabrics that are precision cut and sonically welded to ensure optimal seam integrity, strength and durability for the rigors of the road-on and off. Designed and developed for motorcycle riders and extensively tested over thousands of miles and a variety of terrain.

Bags have strategically placed D-rings, handles and webbing straps for easy attachment to your machine. Shoulder straps included.

The backpack has all the same features as the bags and has air-mesh back pads to ensure comfort and breathability. Has adjustable ergo backpack straps-long enough to fit over your jacket and a sternum strap to provide rock solid stability.

$89.95

A collection of new waterproof bags made by industry giant Givi. There are five different bags available, a 30 liter waterproof ruck sack, 20, 40 and 80 liter waterproof roll top bags and then a 35 liter back pack with padded straps and padded back.

Please note that the 20L bag comes with a pair of elastic straps with plastic hooks for attaching to the bike. Seams are high-frequency sealed, giving it an IP65 waterproof rating. There is an integrated check valve for purging air when collapsing and it is topped off with stylish reflective accents for better visbility.

  • 20L Roll Bag - 17.5"x8"x8"
  • 30L Ruck Sack - 23"x14"x14"
  • 40L Roll Bag - 24"x13"x13"
  • 80L Roll Bag - 30"x14"x13"
  • 35L Backpack - 14"x14"x24"
Add Optional Straps
$141.95
  • Removable Internal stiffener helps bag hold its shape even when empty
  • Can use without stiffener for more compact travel
  • Securely mounts with heavy duty quick release anodized aluminum cam buckles & webbing
  • Easily mounts to Motorcycle, UTV, ATV, PWC, and snowmobile 
  • Can be mounted across or along seat or tail section
  • Electronically heat welded seams make this bag 100% waterproof
  • Air tight roll closure ensures no water enters the bag
  • Made from waterproof and durable 24oz Tarpaulin PVC
  • Coated outer material prevents slipping or marking
  • Firm base panel helps support bag even when not supported by a rack
  • Removable and adjustable carry handles can also secure other items to bag
  • Strong D-rings allow more Survivor bags to be attached
  • Hi-Visibility reflective accents on straps, front and sides of bag
  • Quickly attaches to most factory tail racks or hard saddlebags
  • Reflective compression straps easily adjust to the volume of content
  • Includes an Exclusive Lifetime warranty
  • Available in Black (SE-3000-BLK) and Yellow/Black (SE-3010-YEL)
  • Main compartment measures: 20”L x 10”W x 12”H
  • Holds 39.33 Liters
Choose Color
$114.95

Duffel bags are a great way to throw extra gear on a bike for any type of travel. And the 100% waterproof 2020 Expedition Dry Duffels WP (Welded Product) let you load up in style, help protect your gear, and stay stable on the bike.

  • 100% waterproof construction for all-weather riding
  • Multiple attachment points and carrying handles make this piece of motorcycle gear easy to travel with
  • Use the compression straps to keep your gear compact and secure
  • Radio-frequency welded construction makes these bags rugged and ready for any riding conditions

The innovative design of these motorcycle duffel bags makes loading and unloading easier than traditional duffel bags. The roll-top can be rolled more times for smaller loads or unrolled for just-one-more-thing capacity. And with three sizes available, there's a size best for any purpose. A short trip across town in the rain while the street clothes stay dry inside? Weekend getaway? Full-on kitchen-sink-style touring?

Four compression straps and two mounting straps keep things tight on the bike. The dual carrying handle and removable shoulder strap make off-bike transport easy.

All Expedition Dry-Line bags are designed in the USA and feature their own heavy-duty 840d TPU fabric construction with fully sealed radio-frequency welded seams. Roll-top closures with no-wick webbing seal out water, mud, and dust. We recommend a three roll minimum for maximum weather-proofing.

 

Small Capacity: 42 liters/2562 cu in

  • Height: 11” / 28cm (with the ability to get taller)
  • Length-Front-to Back: 12” / 30cm
  • Width: 20” / 51cm
  • Weight: 2.9 lb/1.3kg
$149.95

Rigg Gear has created a couple of great roll top bags. These bags are 100% waterproof, made from 24 oz. Tarpaulin PVC and then electronically heat welds the seams. A roll closure with self-fastening webbing and quick release buckles keeps the top closed and sealed. The Tarpaulin is UV coated so clean-up is quick and easy. Each of these bags has a lifetime warranty!

Once topped off, you can fasten it to your bags, racks or whatever by four custom aluminum G-Hooks and webbing straps that are included with each bag. Each bag has a Tri-max 1680D ballistic nylon panel sewn on a side to be used on the bottom for wear resistance. This also serves as a comfort panel when the bag is used as a backpack.

*Each bag has sewn in loops that allow attachment of a set of shoulder straps so these bags can double as a backpack. Perfect for a day hike.

Each of the bag sizes is available in Black or Yellow. Main compartment measurement is 18" Long by 8" Dia. for the 15L and 19" Long and 10.5" Dia. for the 30L bag.

(NOTE: The 15L bag does NOT include the straps, can be purchased separately.)

$69.95

Do more with less with the 2020 Rolie Bags WP (Welded Product) from Wolfman Motorcycle Luggage. This 100% waterproof, roll-top bag uses waterproof fabric, durable straps and buckles, and laser-cut slots to allow for a variety of mounting options.

  • Waterproof RF-welded seam construction.
  • Construction and materials resist water, mud and dust.
  • Mount to any number of rack systems.
  • Multiple sizes are available to meet all of your needs.
  • Easy attachment points so you can mount it where this motorcycle bag where you need it most. 

The 2020 Wolfman Rolie Bags offer superior protection against the elements utilizing the latest in Radio Frequency Welding (RF Welding) technology and custom 840d TPU fabric. With standard straps and additional mounting slots laser cut into the body, Rolies allow you to personalize your kit. Use as a compressible Rack or Seat Bag.  Same bag, Multi-function.

Versatile - same bag, many uses:

  • Tail Bag
  • Rack Bag
  • Crash Bar Bags
  • As a top or side pocket to the Rocky Mountain Expedition Saddlebags.
  • Top Pocket to the E-12 Saddlebags
  • Stackable - stack a Small Rolie on a Large for more capacity

Small Capacity: 6 liters/366 cu in

  • Width: 6” /15cm
  • Height: 15” /38cm (with the ability to get taller)
  • Front-to-back: 4” /10cm

Weight: .68 lb/.31kg

$74.95

The perfect dry trail pack from Moose. Constructed of heavy-duty waterproof tarpaulin with heat-welded seams. Heavy-duty ITW quick-release buckles and YKK water-resistant zippered external pockets make for a versitle bag.

The roll-down top creates a truly waterproof seal for the main compartment. Dual compression straps provide a secure closure and can be used to store gear externally as well. Coated tarpaulin material makes cleaning a breeze. Available in three great sizes - 25, 40 and 60 liters.

If you like these bags, you might like the matching ADV1 Backpack.

Choose Size
$59.95

Ultra lightweight polyester (with PU coating) waterproof material, sealed seams, and heavy-duty ITW quick-release buckles make these a great bag for temporary packing or organizing items in larger bags and staying dry regardless of what they are packed in.

Available in a single 25 liter bag or a set of three bags that include a 2 liter, 5 liter and 10 liter bag.

Choose Size
$23.95

The Chilly Exhaust Heat Shield is the most effective heat shield on the market. The innovative three piece design consists of a top shield attached to 2 rails with rivets and spacers. This reduces the contact area and slows down heat transfer. They have incorporated a patented, insulated reflective blanket on the underside of the shield to reduce radiant heat transfer. The included stainless steel clamp makes it simple to install. 

We highly recommend a heat shield if you run soft luggage without hard racks. 

FEATURES:

  • Solid Top Shield - The logo is laser etched and there are no cutouts on the top shield. This prevents radiant heat from passing straight through to your luggage.
  • Side Rails - By isolating these with spacers the heat conductive surface area to the top shield is reduced and slows down heat transfer.
  • Radiant Heat Shielding - The reflective insulated blanket on the bottom of the shield is the real hero. This patented material won't be found anywhere else in the motorcycle industry. 
  • Stainless Steel Clamp - Slots have been provided in the side rails to make installing as easy as it gets.
  • Brushed Aluminum - Lightweight and looks nice.

DIMENSIONS:

  • Length 7.5" (190mm) x Width 3.5" (76mm) x Height 1" (25mm)
  • Clamp fits any exhaust 3.5" - 5.5" (89mm - 149mm)
$38.95

Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.

$29.95

Quick day trips often necessitate the need for additional gear storage … the OBR ADV Gear Enduro Saddlebag answers this need with a creative downscaled design of the OBR ADV Gear Adventure Saddlebag. The OBR ADV Gear Enduro Saddlebag maintains the same fit and function keeping the load in close to the bike and forward for improved handling. OBR ADV Gears 10l Enduro Saddlebags are a great solution for packing extra tools, rain gear, or even overnight gear for those with minimalist needs.

Features

  • 600in3 (10L) Capacity
  • Heavy duty ballistic nylon construction with high strength UV resistant nylon webbing
  • Heavy duty #10 dust resistant coil zipper with storm flap
  • Padded inside/outside panels to protect bike and gear
  • One size fits all design with adjustable seat cradle straps
  • Versatile quick On/Off
  • Generous use of reflective Side webbing for increased low light visibility
  • Versatile Molle Loops for added tie down and attachment points
  • Includes 1 ea. rear anchor strap to work with a rear cargo rack and 1 ea. gutter hook anchor strap to work with bikes without a rear rack
  • Load centralizing design keeps load mass in tight to the bike and forward for better handling on and off road
$126.99

Whether it’s a quick overnighter or a multi-day adventure … the OBR ADV Gear 38l Adventure Saddlebag will get you to where you’re going and back with all of your gear. Ample amounts of capacity along with adventure tested robust construction makes the OBR ADV Gear Adventure Saddlebag the bag of choice for the hardiest of adventurers.

Features

  • Spacious capacity at approx. 2300in3 (38L) 
  • Heavy duty ballistic nylon construction with high strength UV resistant nylon webbing
  • Heavy duty dust resistant #10 coil zipper with storm flap
  • Padded inside/outside panels w/ load managing compression strap
  • Universal one size fits all design with adjustable seat cradle straps
  • Generous use of reflective webbing for increased low light visibility
  • Versatile Molle Loops for added attachment and tie down points 
  • Includes 1 ea. rear anchor strap to work with a rear cargo rack and 1 ea. gutter hook anchor strap to work with bikes without a rear rack
  • Load centralizing design keeps load mass in tight to the bike and forward for better handling both on road and off. 
  • Quick and easy On/Off versatility
  • Slip on rain covers for increased protection against the elements sold separately
Add Rain Covers
$186.99

Giant Loop has removed the zipper in the Coyote Saddle bags, and now it is a true roll-top bag. This bag straps on to dirt bikes and dual sport motorcycles, no passenger pegs or racks required. Saddlebag rides on rear fender and/or tail rack.

  • Includes 3 Dry Pods equipped with air release valves
  • Includes a Hot Springs Heat Shield
  • Military-spec materials and construction
  • Limited Lifetme Warranty against defects
  • Capacity: 39 Liters
$398.95

100% Waterproof! NEW Saddlebag Dry Pods update Giant Loop’s Great Basin Saddlebag and Coyote Saddlebag, replacing the Great Basin Dry Pods and Coyote Dry Pods.

Keep gear organized and dry with this set of 3 roll-top inner liner Saddlebag Dry Pods, featuring RF welded seams and air purge valves that make it easy to compress gear by squeezing air out of the sealed Dry Pods. Specifically designed to fit inside every version of both the Great Basin Saddlebag and Coyote Saddlebag – as well as the new Great Basin Saddlebag Roll Top and Coyote Saddlebag Roll Top – Giant Loop’s Saddlebag Dry Pods also can be used anywhere you need high-quality, lightweight dry storage.

Includes two side Pods and one double-ended center Pod. Backed by a Limited Lifetime Warranty against defects.

$77.95

The Great Basin Saddlebag by Giant Loop is the largest member (now 68 liters!) of the Giant Loop family of rackless luggage. It has been updated with a roll-top making it much easier to get in and out of. Designed specifically for bikes equipped with passenger pegs, no racks required.

  • Includes 3 Dry Pods equipped with air release valves
  • Includes a Hot Springs Heat Shield
  • Separate mounting and compression straps for easier gear access
  • Military-spec materials and construction
  • Limited Lifetme Warranty against defects
$498.95

Take a load off with the MoJavi Saddlebag! Improve rider endurance and comfort by taking the weight out of a backpack and putting it on your bike.

Specifically designed to carry just the essentials needed for a day trip or trail ride, the MoJavi Saddlebag is the slim, trim bag for inner tubes, tools, fluids and other save-a-ride necessities. Straps on. Stays on. No matter what.

Sewn on molded rubber graphics keep them looking good!

  • Includes Hot Springs heat shield
  • Mounts without drilling. No hardware required
  • Capacity: 6 Liters per side
$228.95

From Giant Loop, the Siskiyous are a pannier bag that does not require racks for a secure mounting and works well with a passenger. If you have racks, these bags will still work great, they are just not required. Each bag includes a waterproof inner pod liner. There are multiple lash points on the bags which allow for the simple attachment of additional bags along with two large bellowed pockets for water or fuel bottles up to 2 liters in size. There is also a zippered mesh pocket under the lid. This bag is only available in black. Comes with 2 Hot Springs Heat Shields.

  • Capacity: 35 Liters per side
$698.95

 

    The Givi EA100B Easy Range Saddle Bags offer a durable and functional way to pack your bike. An excellent choice for sport, sport touring, and adventure bikes, these saddlebags are expandable up to 40 liters and come equipped with rain covers, reflective strips and shoulder straps for easy carrying. 

    Features:

    • Rain cover
    • Heat resistant panels
    • Expandable
    • Shoulder strap
    • VELCRO® brand closures bike attachment straps
    • Capacity: 23 liters per side (40 liters per side expanded)
    • Dimensions: 20.8" L x 7" W x 12.5" H (11" W expanded)
    • Empty weight: 5.97 lbs
      Choose Size
      $169.95