KLX230: Suspension

• Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
• Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
• Triple-lip seal design
• Dyno-tested to last 3 to 4 times longer than OEM seals
• Directional ribs allow seal to be installed easily
• Kits include fork seals and dust wipers

• Each kit contains the bearing and all of the seals, spacers and pins to rebuild the shock bearings to factory specifications
• Constructed from OEM quality components at a fraction of the cost

• Repair kits include all the bearings, seals, shafts and spacers required for a complete rebuild
• Constructed from OEM-quality components at a fraction of the cost

Kouba lowering link will lower the rear 0.75" - 2.25". Comes with bearings and seals installed for a quick and easy installation. Instructions included.

Comes with “H” linkage and aftermarket shock clevis for additional lowering. Each can be used together, or individually.

Note: We recommend all customers have a dealer install the shock clevis, as the stock clevis is difficult to remove.

Sold as a kit, lowering amounts shown below.

Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.

The three forces of suspension, testing procedures, even the black arts of chassis geometry: This explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.

• Extracts dirt and debris trapped between fork seal and tube
• Easy way to keep fork seals clean and debris free
• Works on conventional and upside-down forks

Showa removed the schrader valve on many newer rear shocks. Now you need a needle to recharge your shock with nitrogen after a rebuild. Race Tech built this unit just for that job.

The features of this tool include 300 psi capacity, bleeder valve and T-handle plunger pin chuck. Swivel chuck has a 12" flexible hose. Comes complete with instructions, carrying box and Schrader valve extension (required on some Showa shocks). Nitrogen bottles available at any welding supply house.