B & B Off Roads Honda CRF300L bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Introduced in 2021, the CRF300L came with an abundance of changes with the biggest being; a new 286cc motor with a huge increase in torque, higher ground clearance (11.2 inches) and lighter weight overall compared to the CRF250L. Fuel capacity remained the same at 2.1 gallons.
Chain Size: | Front Sprocket: | Rear Sprocket: | Front Tire: | Rear Tire: | Spark Plug: |
---|---|---|---|---|---|
520x106 | 14T | 40T | 80/100-21 | 120/80-18 | SIMR8A9 |
Armor - Bike Protection
Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.
They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.
Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.
Mounting hardware and instructions included.
Note: Will not fit the CRF300L Rally
This is the ultimate in radiator guards! It will protect your fragile radiator from nasty front & side impacts.
This ultra tough guard is constructed from 3/16" aluminum and is easy to install.
This radiator guards uses brace rods for that extra support! All Mounting hardware is included.
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Model Specific, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Compatible with all Barkbusters deflector guards (not included)
Add Plastic Handguards for a complete kit.
To fit straight 22mm (7/8″) handlebar.
- Barbusters strongest handguard EVER!
- Designed for Enduro and Trail bikes.
- Two mounting points secure the full wrap around aluminum design.
- Compact curved profile to protect hands and levers during intense trail and tight bush riding.
- Heat treated aluminum backbone for maximum strength.
- Replaceable, high impact resistant EGO plastic guards included.
- Large range of colors matched to popular motorcycle brands.
- Deflectors available for increased protection (sold separate).
- Easy installation.
- NOTE: Not ideal for bikes with long clutch and brake levers.
For straight 7/8" handlebar
Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Tough and weather shielding Storm handguards
- Aluminum backbones are compatible with all Barkbusters deflector guards
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right Storm plastic handguard deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
For Straight 7/8" handlebar
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Includes VPS left and right plastic deflectors
- Easy installation
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right VPS plastic deflectors
- VPS deflector fastening hardware
- Left and right adjustable position wind extension deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
For Straight 7/8" handlebar
Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.
Note: This kit includes the handguards only. Deflectors sold separate, can be added by selecting color from drop down menu.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
To fit tapered 28.5mm (1 1/8") handlebar.
- Barkbusters strongest handguard EVER!
- Designed for Enduro and Trail bikes.
- Two mounting points secure the full wrap around aluminum design.
- Compact curved profile to protect hands and levers during intense trail and tight bush riding.
- Heat treated aluminum backbone for maximum strength.
- Replaceable, high impact resistant EGO plastic guards included.
- Large range of colors matched to popular motorcycle brands.
- Deflectors available for increased protection (sold separate).
- Easy installation.
- Note: Not ideal for bikes with long clutch and brake levers.
NOTE: will not fit Renthal Twin Wall or Barkbusters VSBar.
For Tapered 1 1/8" Handlebar
Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Tough and weather shielding Storm handguards
- Aluminum backbones are compatible with all Barkbusters deflector guards
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right Storm plastic handguard deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
For Tapered 1 1/8" handlebar
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Includes VPS left and right plastic deflectors
- Easy installation
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right VPS plastic deflectors
- VPS deflector fastening hardware
- Left and right adjustable position wind extension deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
For Tapered 1 1/8" handlebar.
Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.
Note: This kit includes the aluminum handguards only. Plastic deflectors sold separate, can be added by selecting color from drop down menu.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
- High-impact, composite injection-molded outer guard around an anodized aluminum inner guard
- Includes an indexed steel bar-end insert that mounts solidly and prevents Rally Pro handguards from slipping – even under the most demanding conditions
- Small integral spoiler incorporated into design
- X-Strong universal silver mount kit that fits 7/8” (22mm), Pro Taper 1 1/8"(28mm), Magura and Twin Wall aluminum handlebars included.
Some models with adjustable windscreens may need the windscreen rotated forward, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.
These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.
Works with 7/8" or 1-1/8" bars.
X-Factor guards may require you to cut your lever ends down, or use short levers.
The X-Factory Handguards from Acerbis feature a steel bar wrapped with an injection molded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering insurmountable protection from roost, debris, and extreme conditions.
A universal mount kit is included that allows for mounting on either 7/8" or 1 1/8" handlebars.
Will not fit XT250 with stock handlebars (oversize bars ok). Recommend Acerbis Rally Pro X-Strong to clear master cylinder.
Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.
Select your desired color.
Must add the corresponding size mounts to fit your handlebar.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
Please Note: These handguards do not fit the Yamaha T7
FUZION guard feature the ultimate in hand protection with a unique design and flexible yet durable material.
The expanded coverage area sweeps back toward your hand significantly increasing coverage making it perfect for cold, muddy or wet conditions.
The FUZION features a unique two position mount and is constructed of molded light-weight closed-cell AEPE foam, which is crush-proof, water proof and extremely durable.
The FUZION will work great for road of offroad riding, where wind deflection is important, and or bouncing off trees is a common occurrence.
Kit includes mounts. Optional replacement mounts available.
- Designed to minimize handlebar vibration for Barkbuster Handguards that can’t accomodate OEM handlebar weights.
- Sleek aerodynamic look.
- Forged Steel with powder coat finish.
- Fit in conjunction with most Barkbusters backbones (except EGO).
- Fits externally to the VPS backbone.
- Available in black.
- Sold as a pair
Weight:
360 grams/pair or
180 grams/each
Fitment Notes: If you have a hardware kit listed below see special fitting notes as additional parts may be required
BHG-010 Requires two additional M6x40mm countersunk bolts
BHG-032 R1200GS/A requires two additional M8x55mm countersunk bolts
BHG-045 G650GS requires two additional M6x65mm countersunk bolts
BHG-050 Will not fit
BHG-051 Requires two additional M6x50mm countersunk bolts
BHG-059 Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit
BHG-075 Will not fit
BHG-079 Will not fit
To be fitted to the top of the Barkbuster EGO handguard.
- Easy installation.
- Can be removed in minutes for a more compact feel.
- Deflectors provide maximum protection and coverage from the elements.
- Deflector Set available in black or white to suit your style.
- Includes two deflectors and mounting screws.
Don't cut the ball ends off of your levers! These billet spacers move your hand guards outward to allow clearance for the full length of the stock levers. Designed to fit steel or aluminum bars. Includes longer stainless steel mounting bolts.
Developed for the DR650 but may work on other models with long levers. (May require additional adjustment or modification on some models.)
Not compatible with Acerbis and Emgo hand guards
You can keep your Cycra handguards even if you upgrade your handlebars to a different width.
Replacement mounts that keep your Cycra handguards fresh and tight.
CNC-machined from billet aluminum for the best fit and strength.
Please Note: These handguards do not fit the Yamaha T7
- EGO plastic guards only.
- To fit Barkbusters EGO aluminum backbone. (New design plastic guard fits on current backbone.)
- Left and right pair with mounting screws.
- High impact resistant plastic guards.
- Compact curved profile to protect hands and levers during intense trail and tight bush riding.
- Top vents for increased airflow.
- Large range of colors matched to popular motorcycles brands.
- Deflectors available for increased protection.
- Easy installation.
Droppin’ into the weather? Combine Bushwackers Hand Guards with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls. Essential gear for motorcycles, snow bikes and snowmobiles.
- Cold/wet weather comfort
- Brush, mud and trail protection
- Strap on/off in seconds
- Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors
- Tough stretch polyurethane strap (can be used separately)
- Custom wind foil shapes
- No stitching or pieces to fail
- When not using Bushwackers Hand Guards, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others!
- Made in USA
REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.
Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic
Dimensions (flat): 13.5″ (length from end closest to bar clamp to end closest to bar end) x 16″ (widest part at end of bars) x 6″ (narrowest part nearest center of bar)
Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.
The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.
Features:
- Fits most motorcycle handlebars
- Maximum cold weather protection
- Compatable with or without Barkbusters backbones
- Lined with waterproof membrane
- Windproof
- Full wrap design
- Allows full access of controls
- Does not block view of handlebar thumb controls
- Simple to install and remove
Whats in the box:
- Two BBZ cold weather handguards
- Mounting hardware
- Instructions
It may not surprise you that they are covered with HippoSkin™, their waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed cell foam insulation—both are designed to keep inclement weather away from your hands.
Sold in pairs.
Hand/brush guards are required for proper fitment and for safety reasons.
Hippo Hands go on and off in seconds and never require tools or hardware.
The Backcountry is 9" deep.
If you like to stand and ride, this is the model for you! But… these hand covers also fit to just about any bike. They are also a great option for cruisers with hand guards or lever guards.
They feature a durable, quilted interior and flexible, neoprene cuff which ensures a great fit on so many bikes. The Backcountry is their smallest, most easily adaptable hand cover.
The Backcountry features a front reflective panel for higher visibility in low light situations.
The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.
Features
- High strength and water resistant 1680d Ballistic Nylon construction
- Universal easy on/off Velcro snap strap attachment system
- Reflective Front Strip for High Visibility
- ¾ Open design provides full coverage of the hand while not impeding controls
- Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)