Burly vinyl fabric, a roll-top closure and radio frequency welded seams make the Expedition Dry Saddle Bags fully waterproof so your gear stays dry.
A secure six-point-per-bag mounting and compression system makes for an extremely stable load on virtually any side rack while still allowing the bags to come on and off the bike quickly and easily.
• Capacity: 19 Liters per side
Constructed from heavy duty waterproof material
- Durable heat welded seams
- Heavy-duty quick release buckles
- Roll down top design creates waterproof seal
- Coated material is easy to spray and wipe clean
- Straps are adjustable via hook and loop to fit multiple bike seat widths
- Available in two sizes 20L or 30L
- Sold in pairs
An affordable and durable dry saddlebag. Made from 24 oz. waterproof tarpaulin PVC fabric that is coated on the outside to prevent slipping and marking, with all the seams radio frequency welded. this is a quality container.
Manufactured with heavy duty top straps that allow them to be mounted directly to most aftermarket and factory racks and even grab rails.
• Capacity: 27 Liters per side
From Moose Racing, manufactured with 1.5mm thick 6061 heat treated aluminum walls. Composite corners bumpers offer tie down and accessory mounting points. Internal gasket and lip system protects capsules from the elements.
Moose cases mount easily to most side racks including our ProCycle racks. Variety of accessories are available by clicking on the link below.
Moose Racing has teamed with Pelican Products to bring you the ultimate luggage for adventure touring. Cases are watertight, crushproof, and lighter than aluminum. Comfortable rubber over-molded handle, stainless steel padlock protectors and easy open double throw latches make carrying and securing the cases easy
Universal mounting brackets for cases and mounting hardware are included with Expedition Luggage Rack System shown above. This system is designed using a spring and pin design, meaning easy on and easy off. Universal mounting hardware included.
Small - 20"x16"x7"
Large - 21"x17"x8"
From Giant Loop, the Siskiyous are a pannier bag that does not require racks for a secure mounting and works well with a passenger. If you have racks, these bags will still work great, they are just not required. Each bag includes a waterproof inner pod liner. There are multiple lash points on the bags which allow for the simple attachment of additional bags along with two large bellowed pockets for water or fuel bottles up to 2 liters in size. There is also a zippered mesh pocket under the lid. This bag is only available in black. Comes with 2 Hot Springs Heat Shields.
- Capacity: 35 Liters per side
A new entry in the waterproof, soft luggage market by industry giant Givi. Made from PVC500D Tarpaulin material with high-frequency stitchless seams. They have roll down closing system to insure a completely waterproof container.
- Carrying handle
- Reflective inserts
- Fluorescent inserts (high visibility)
- Capacity: 25 Liters per side
The Wolfman Rocky Mountain Saddlebags are the largest, most comprehensive saddlebag they have ever manufactured.
These bags are sewn utilizing our own custom vinyl-coated 1680 denier ballistics nylon fabric. The bags have a 35oz. vinyl bottom to compliment 22oz. vinyl back and front accents. Reflective striping runs horizontally from front to back.
• Capacity: 33 Liters per side
These 28 liter boxes are molded from high-density polyethylene. The same material used for white water kayaks and highway road barriers and are nearly indestructible. Click here to see the AcmeZoom video of what these boxes will stand up to.
These boxes are designed to provide safe, dry, and secure storage for all your gear. The overlapping lid joint and marine grade gasket system keeps the contents clean and dry. Stainless steel latches are lockable.
The top of each Mule Pack is contoured, making stacking items on top easy as well as making the lid stronger. Perfect for tents and sleeping bags.
The Great Basin Saddlebag by Giant Loop is the largest member of our growing family of motorcycle luggage solutions. Designed specifically for bikes equipped with passenger pegs.
- Includes 3 Dry Pods.
- Includes Hot Springs Heat Shield.
- Separate mounting and compression straps for easier gear access
- Redesigned storm flap for improved access and water deflection
- Military-spec materials and construction
- Capacity: 60 Liters
Giant Loop has updated their Coyote Saddlebag. This bag straps on to dirt bikes and dual sport motorcycles, no passenger pegs or racks required. Saddlebag rides on rear fender and/or tail rack.
- Includes 3 Dry Pods.
- Includes Hot Springs Heat Shield.
- "Beaver tail" and side-release buckled compression straps - improved access and gear compression
- Beefy YKK coil zipper — opens/closes with less effort
- Capacity: 39 Liters
Now availble ini five colors! Yellow, White, Gray, Orange and BLACK!
Take a load off with the MoJavi Saddlebag! Improve rider endurance and comfort by taking the weight out of a backpack and putting it on your dirt bike, dual sport or supermoto motorcycle.
Specifically designed to carry just the essentials needed for a day trip or trail ride, the MoJavi Saddlebag is the slim, trim bag for inner tubes, tools, fluids and other save-a-ride necessities. Straps on. Stays on. No matter what. Last but not least, new sewn on molded rubber graphics make them good looking for a long time!
- Includes Hot Springs heat shield
- Mounts without drilling. No hardware required
- Capacity: 6 Liters per side
Day Tripper Saddle Bags are refined minimalist saddle bags that work without a rack. Best for day trips or for very light packers. These allow riders a chance to move weight off the body and onto the bike. Highly adjustable mounts are able to fit virtually all Enduro/Dual Sport motorcycles. The compact design does not hinder the rider.
- Extra sleek profile
- Two 2" straps across the seat
- Quick and easy on off. No rack system needed.
- 8 D Rings on the top to attach the Enduro Duffel, Rolie bags and our Renegade duffel.
- Capacity: 6 liters per side Dimensions: 3x10x14
These light traveling saddlebags are made of semi-rigid formed 600-denier Saddletuff and foam shell and feature internal mesh pockets, zippered expansions and stylish 3-D accents. They are 17" long by 10" tall and 6" deep. The formed shell has a three sided zipper that allows it to expand an additional 2 inches should you require the space. The unique water-resistant zippers make these bags ideal for nasty weather.
The nylon stabilizing straps secure bags to a turn signal, bungee hook or frame tube above and forward.
This large case is lockable and includes all the hardware necessary to mount them to your rear rack (you will need a rear rack). The case mounts with a quick disconnect system that allows the trunk to be removed from the motorcycle quickly and easily from the inside once it is unlocked. With the lid closed and secured, the trunk is effectively locked to your motorcycle. Solid construction is weatherproof and will keep your contents dry even when riding in the rain. This large trunk has a capacity of 47 Liters.
Here are the companion Expedition Aluminum Top Cases to go with the Moose Expedition Side Cases. Available in either a 25 or 38 liter size.
Like the Side Cases, these too are made from strong 6061 aluminum construction with 1.5mm thick walls that have been heat-treated and then assembled with stainless steel or aluminum rivets.
Click here to view a PDF file of all the features of these top cases as well as other options that are available.
- Capacity: small 25 liters, large 38 liters
The Enduro Tank Bag will work on dual sport and dirt bikes - from the DR650 to the XR650L and just about anything in between. A 4-point quick release mounting system and no-skid/no-scratch pad keeps the Enduro Tank Bag in place during the most aggressive riding. The innovative design allows the bag to sit on the tank and not interfere with the gas cap or the vent hose.
The mounting harness is now the same for the Enduro Tank Bag, the Enduro Pocket and the Small Expedition Tank Bag. Easily swap between the bags as your needs change - without changing the harness. Capacity: 6 liters.
Refinements for 2017 include: An adjustable and removable interior clear divider pocket on a hook & loop system as well as a removable/adjustable bunji-cord across the top that provides a convenient spot for gloves and such while fueling. (Please don't ride with your gloves under the shock-cord or you may never see them again.) Lastly, a new under buckle tab design to keep your tank scratch-free!
The Explorer Lite Tank Bag was designed for riders that want something smaller than the Rainier Tank Bag, but larger than the Enduro Pocket. It is shorter and slimmer for more handlebar clearance. The same curved bottom makes for an excellent fit on most sloped tanks and it excels on dual-sport and adventure bikes.
An expandable gusset adds capacity when you need it. An optional top pocket (sold seperately-see below) can add even more capacity when it is required. Reflective accents add night time visibility and a handle makes it easy to take it with you when you unfasten it. Capacity: 16 Liters
Upgrades for 2017 include an adjustable and removable interior clear divider pocket on a hook & loop system as well as a removable/adjustable bunji-cord across the top provides a convenient spot for gloves and such while fueling. (Please don't ride with your gloves under the shock-cord or you may never see them again.) It is also constructed from a new, stiffer foam to maintain shape and includes a new under buckle tab design to protect the tank.
KLR RIDERS NOTE! You need to order an optional front harness for your year KLR for this bag to mount properly.
This is the perfect addition to your existing tank bag when you need just a bit of extra space. The Top Pocket quickly attaches to several standard Wolfman tank bags (see list below), and because it quickly detaches, the Top Pocket makes a handy place for your wallet, phone or other items best kept with you when you leave the bike outside that cafe.
Durable ballistic nylon construction includes that all seams are bound and reinforced. A handy handle makes carrying it simple and easy. 12" Long, 10" wide and a slim 2" high. The top Pocket fits the following tank bags: Explorer Lite, Rainier and Express.
The Enduro Pocket is a tiny but highly effective tank bag. Perfect for keeping your wallet, phone and mini-camera handy while you ride. The idea was born when the Wolfman was riding his dirt bike in scenic places, but not bothering to take his camera out of his hydration pack. The Pocket was invented.
The 4-point quick release mounting and no-skid/no-scratch pad keeps the Enduro Pocket in place during the most aggressive riding. Full ballistics nylon helps keep weather out. Padded bottom protects the contents. The small adjustable bungee cord is perfect for compressing the contents and provides a place to put gloves when gassing up. Slim construction keeps it out of the way while riding.
The Pocket uses the same four-point harness system as the other Wolfman Tank Bags shown making it easy to swap between the different bags as your needs change - without changing the harness. Capacity: 1 Liter
- Durable black saddlebags keep your gear close at hand in 2 zippered compartments
- Simple to install. Unscrew the gas cap, drop the bag into place, screw cap back on
- Insulated exterior pocket holds a 1-liter water bottle
- Mesh pocket inside tucks away wallets and keys
- 600D polyester pack cloth is coated for water resistance
- Equipped with storm flaps and deluxe zipper pulls
- Fits most Motorcycles and ATVs
- Includes optional Velcro type fasteners to secure bag to sides of gas tank
- Also works nicely as small saddlebags
Diablo Tank Bag Pro upgrades are similar to its larger cousin, the Fandango Tank Bag, while remaining true to its minimalist, slim, trim design.
An electronics pass-through enables on-bike charging and power inside the tank bag and/or the clear vinyl map pocket top. Other key new features: Full interior lining with hook-and-loop accepting fabric, movable divider with elastic tire pressure gauge holder, exterior mesh pocket and D-ring mounts for new optional Pannier Pockets (2 liters each side).
Giant Loop's most minimalist tank bag is perfect for riders who "don't like tank bags." Completely re-envisioned and redesigned for 2014, the Buckin' Roll Tank Bag now fits virtually any motorcycle, and keeps all the essentials handy and out of the way when standing on the footpegs.
Consists of three components, which can be used individually or in any combination: harness, center Tool Pouch case and Pannier Pockets
The 2 liter center case secures to the harness with cam buckle straps. Two 2 liter Pannier Pockets attach to tank, shrouds or engine guards.
Capacity: 8 Liters
Fandango Tank Bag PRO represents a major upgrade of Giant Loop's popular tank bag. Expandability, electronics compatibility, and features driven by rider feedback inspire this Adventure Proof state-of-the-art design.
- Available in Black, Gray, White, Yellow and Orange
- Electronics pass-through integrated throughout each compartment
- Easy-access clear vinyl map pocket
- Mil-spec materials and hardware
- Limited Lifetime Warranty
Capacity: 8 Liters
- Base Dimensions: 8.25" X 12"
- Tank Bag Dimensions: rear 8" tall, front 5" tall
- Volume: 8 liters
- Available in Black, Gray, White, Yellow and Orange
- 22 oz vinyl coated polyester Bomb Shell reinforced with foam
- Slip-Not and clear vinyl top
- Rubber electronics port
- Water resistant YKK zipper (bag)
- Reflective accents for visibility
- Concealed document pocket
- Electronics pass-through integrated throughout each compartment
- Full length interior lining with Veltex hook-and-loop accepting fabric (compatible with many camera bag dividers)
- Movable divider with elastic tire pressure gauge holder and organizer slots
- Exterior mesh pocket
- D-ring harness mounts for new optional Pannier Pockets (2 liters each side)
This contoured bag fits most motorcycles on the market, including sloped tank adventure models. This bag has some really great features:
- New self-adjusting hooks attach to bag with soft ties connecting to bike
- Made from top quality Tri-Max ballistic nylon
- Bag maintains shape, has reflective piping and a lined interior
- Adjustable shoulder/tether strap and heavy-duty zippers
- Protective material prevents slipping or marking
- Integrated GPS/Smart phone pouch under map pocket
- Includes a Lifetime "No Hassle" warranty and rainstorm cover
- Fully expandable when more room is needed
- Main compartment size: 11"L x 9"W x 9"H Standard / 11"L x 9"W x 13"H Expanded
- Capacity: 15 Liters
The perfect place to carry that extra tube, patch kit, tire irons, etc. The Wolfman fender bag clamps securely to your front fender with 4 side hooks. No drilling is required. 12" long and 6.5" wide.
Capacity: 1.25 Liter
The perfect tail bag if you want to mount it and forget it. Store tools, snacks or even a light jacket if need be. Only color available is the black, just like the image.
- Rugged Cordura construction
- Internal elastic tool holder
- Mounting kit to fit any off-road or adventure bike
- Seams are bound on the inside and stress points are bar tacked
- Capacity: 8" x 6" x 5". 240 cubic inches of space
This Moose Fender Pack has a hook & loop mounting pad that you attach to the rear fender with the supplied hardware. In addition to the hook & loop attachment, the pack is also held to the mounting pad with a nylon strap that locks to the front and rear of the pack to keep it very secure.
The pack itself is made of 600 denier outer material with a PCV inner core that holds it shape and a padded interior withstands the rigors of off-road or adventure riding.
Wrap around twin zipper fobs, plus a wide flap held down with hook & loop material keeps the elements out while permitting full access to your gear inside the pack.
Pack expands for larger loads and has a inner cinch strap to keep larger items in place. Internal pockets, including a clear window for important documents, helps organize your belongings.
This 3.5-liter bag mounts on the rear fender with a bolt-on plastic plate that stabilizes the bag with hook-and-loop fabric. Compression straps and sturdy construction further add stability. The bag itself is easily removed so you can carry your tools right to the job.
- Ballistic nylon construction
- All seams bound and reinforced
- Carry handle
- Exterior compression straps
- Mounting hardware included
- Capacity: 3.5 Liters
The Expedition Dry Duffels let you load up in style, help protect your gear, and stay stable on the bike. The innovative design makes loading and unloading easier than traditional duffel bags. The roll-top can be rolled more times for smaller loads or unrolled for just-one-more-thing capacity.
- Small: 33 Liters
- Medium 40 Liters
- Large 47 Liters
The perfect dry trail pack from Moose. Constructed of heavy-duty waterproof tarpaulin with heat-welded seams. Heavy-duty ITW quick-release buckles and YKK water-resistant zippered external pockets make for a versitle bag.
The roll-down top creates a truly waterproof seal for the main compartment. Dual compression straps provide a secure closure and can be used to store gear externally as well. Coated tarpaulin material makes cleaning a breeze. Available in three great sizes - 25, 40 and 60 liters.
If you like these bags, you might like the matching ADV1 Backpack. Click here to check it out.
Ultra lightweight polyester (with PU coating) waterproof material, sealed seams, and heavy-duty ITW quick-release buckles make these a great bag for temporary packing or organizing items in larger bags and staying dry regardless of what they are packed in.
Available in a single 25 liter bag or a set of three bags that include a 2 liter, 5 liter and 10 liter bag.
Saddlemen's Destination Pack secures your valuables within a steel wire mesh sandwiched between a scratch-free, soft inner liner and a tough water resistant nylon outer bag to provide vault-like protection. A velvet smooth inner liner protects your cargo while a six-foot-long flexible stainless steel cable secures the bag to the bike or other permanent structure. (Padlock not included.) The cable doubles as a motorcycle security cable - prevents theft of bag or bike.
- Small 12 x 24 with a 44 liter capacity
- Large 12 x 40 with a huge 76 liter capacity
A collection of new waterproof bags made by industry giant Givi. There are four different bags available, a 30 liter waterproof ruck sack, 40 and 80 liter waterproof roll top bags and then a 35 liter back pack with padded straps and padded back.
- 30L Ruck Sack - 23"x14"x14"
- 40L Roll Bag - 24"x13"x13"
- 80L Roll Bag - 30"x14"x13"
- 35L Backpack - 14"x14"x24"
The Torrent Waterproof Bags from Firstgear were created to provide safe, waterproof protection for all your valuables. Made from tough PVC tarpaulin fabrics that are precision cut and sonically welded to ensure optimal seam integrity, strength and durability for the rigors of the road-on and off. Designed and developed for motorcycle riders and extensively tested over thousands of miles and a variety of terrain.
Bags have strategically placed D-rings, handles and webbing straps for easy attachment to your machine. Shoulder straps included.
The backpack has all the same features as the bags and has air-mesh back pads to ensure comfort and breathability. Has adjustable ergo backpack straps-long enough to fit over your jacket and a sternum strap to provide rock solid stability.
The Rolie Bag you use as a rack bag today will mount on your tank tomorrow or become one of two saddle bags. Same bag. Multi-function. Each waterproof Rolie Bag comes with basic straps that will allow mounting to a rack or seat or to stack bags. You will need an additional mounting kit to mount to your tank, to most fenders, to Side Racks, or to use as saddle bags.
- Small: 4.5 Liters
- Medium 8.5 Liters
- Large 12.5 Liters
The Deluxe Kit consists of two adjustable under-seat straps and our “Tension-O-Matic” rear strap.
Each Rolie bag will come with straps that can run under the seat for mounting the bag. But these Deluxe under-seat straps can be left unobtrusively under the seat, leaving only a small rectangular buckle visible, ready to mount your Rolie Bag whenever you need it.
Add weatherproof capacity to your luggage kit by using a pair of Large Rolie Bags as tank panniers. This strap kit mounts the bags securely to the side of the tank. Best for big bikes -- to ensure there is knee room while riding.
Note: This strap kit works with 2012+ Large Rolie Bags. Previous versions of Large Rolie Bags will use a pair of flat tank harnesses (H605) like Small or Medium Rolie Bags mounted as tank panniers.
The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go. The Moto Caddy is really two containers in one - the longer side is 4 inches long, good for your paperwork, while the other end has a 1 inch depth, perfect for some emergency coins!
Not available at this time
Quality Fuel pack that's easy on the wallet.
- Interchangeable with Roto Pax brand mounts
- New seven layer blow molded technology
- EPA and CARB approved
- Sleek, low profile design
- Versatile mounting capability
This kit fits all Nomadic tubular type racks. (All flat stock racks are already RotoPax compatible)
The upper image shows the kit, which includes all the hardware and instructions required. The lower image is just an example of what the eXpander looks like mounted to one of their racks.
These are all accessories for the Moose Expedition Aluminum Luggage that is shown above on this page. Click here to see those parts.
Accessories for these well designed bags include: custom fit bags to go inside the packs making loading and unloading easier, handles for the bags and lock sets to secure your packs. There are also replacement parts like the organizers that are in the lid as well as lid to box O-rings seals. All of these parts are in the dropdown menu to order.
The Wolfman Pawnee Plate allows 1-gallon RotoPax fuel or water packs to be carried on many side racks.
Convert hard bag side racks to carry liquids and soft luggage in minutes. More fuel and water means more exploring. Designed to mount Rotopax containers to virtually any brand of side racks.
These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hooks - tie down straps.
ROK Straps are a two-piece strap that has a quick-release buckle in the middle and loops on each end. One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around your frame, rack or other secure point and then back through the loop in the end making for a very secure mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap until your load is firmly held in place.
When you need to take your load off, simply undo the buckle. When you put your load back on, click the buckle, give the strap a tug and away you go. Very simple and easy.
- Constructed of stainless steel and is break-rated at 2,000 lbs. Far exceeds all other tie-down hooks or carabineers on the market
- Attach tie-downs almost anywhere there is an 8mm bolt
- Originally designed to give you a place to attach tie-downs to the triple clamp of a dirt bike but there are many other uses, such as bungee attachment points or in the bed of a truck or trailer, behind passenger peg bolts on a street bike or anywhere you can put a bolt.
- Eye is large enough to accept the large size 3/8 in. coated tie-down hooks as well as carabineers
- Packaged in pairs
This clever little map holder clips to your handlebars and keeps your map right in front of you for easy access. The Mapcase has a small clear map pocket on top but unfolds to reveal a larger clear map pocket on the inside. There are also some internal pockets and a zippered mesh pouch to keep small items readily accessible.
RotoPax are proudly made in the USA by the original manufacturer of the 1st generation fuel and water packs. RotoPax are Rotational Molded - the process which produces indisputably superior products.
- Thicker walls and stronger construction
- Bright colors that are less prone to fading
- Extra threads, thicker walls, and sure-seal gasket guarantee no leaks
Giant Loop's Gas Bag™ Fuel Safe Bladder conveniently transports 1 gallon of hydrocarbon fuel for power sports use in a collapsible welded film and ballistic nylon reinforced container that rolls up or packs flat when empty, weighing less than 1 pound.
The Gas Bag Fuel Safe Bladder Kit includes 2 pairs of Giant Loop's adventure proof 26" Pronghorn Straps plus a 3-Pack of Fast Funnel Disposable Fuel Funnels.
Each Gas Bag Fuel Safe Bladder is individually pressure tested and made in USA by Fuel Safe, a leading fuel containment manufacturer based in Oregon.
- Volume: 1 gallon maximum capacity (3.8 liters).
- Empty weight: 11.5 oz.
- Dimensions (flat and unfilled): 19.5" long x 9.5" wide. Rolled diameter (empty): approximately 4".
- Filler neck is standard size, fitting "universal" spouts.
- Materials & Construction: Welded film bladder sewn into ballistic nylon sleeve with webbing daisy chain anchor points and handles.
NOTE: By purchasing this product and filling it with fuel, you are agreeing to the terms and conditions listed below. (Click on Button)
D-ring loop extension straps allow Wolfman saddle bags to be used with RotoPax on Side Racks. They provide the extra length needed when mounting Wolfman saddle bags over RotoPax fuel or water packs.
Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty!
Giant Loop is aiming for smaller, lighter security in the form of its new compact Quick Loop Cables, available in 36- and 84-inch lengths. These cables roll up into a compact coil with an included hook-and-loop strap for easy storage. Both of these cables weigh under 6 ounces. A bright orange vinyl cable sheath not only protects the bike's finish from scratches, but it also provides high-visibility that, according to Giant Loop, is for "discouraging the opportunistic grab-and-dash thief to move on to an easier target."
The 84-inch cable integrates with Giant Loop's Great Basin Saddlebag and Siskiyou Panniers and other large bags which feature cable pass-throughs so riders can secure their luggage to a parked motorcycle. The 36-inch cable is more suited to locking a helmet or riding jacket to motorcycles. These cables do not include a lock.
The Stash Box is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, lockable, vehicle styling is unaffected, and easy accessibility.
- Sized to work with all standard size license plates as well as the current Wisconsin and Ohio plates
- External Dimensions: 7" x 4" x 1" plus 1" on the width for the lock
- Made from molded polypropylene
- Includes all mounting hardware, retention pouch for paper documents, foam insert, lock and two keys
Small and compact enough to fit in your pocket, jacket or on our belt loop, HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point.
Don’t be weighed down carrying your helmet around anymore. Just use the simple to operate, carabineer-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy the security and freedom of HelmetLok.
Once we finished our side racks, it just seemed like the DR needed a matching top rack, so we built one. We made ours slightly larger than the competition - 15" wide x 11" long, to haul those larger dry bags and boxes. Made of the same size tubing as the ProCycle side racks (but with thinner walls) and powdercoated to match, this makes a great looking combo. There are built in tabs for a RotoPax mount and four outside mounts as well for tying things down or anything else you might need. A more rearward mount for the signals puts them out of the way of soft or hard luggage and keeps them at a level below the top of the rack, safe from harms way. Stock signal wires will still reach too.
This rack will work with or without side racks.
Attach this plate to you moto-mule PC Cargo Rack and then pop your Givi Monokey Top Case right on. Makes for easy commuting and errands. Can pop the case off in seconds or put your helmet inside and lock it up.
All hardware included.
Click here to see the ProCycle Cargo Rack.
Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.
The cargo racks are then hard clear anodized for durability. PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.
Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem. See bottom image at left.
Each rack is custom tailored to fit your bike so you know it will fit and look right on your bike. We don't use a universal design approach. Handcrafted here in the USA.
Steel cargo rack from TCI. It features a nice wide platform and a durable powder coat finish. 17" wide and 10" long.
They're finally here! The long awaited ProCycle Side Racks are in stock and ready to ship. We have designed our racks to allow easy installation of both hard and soft luggage including the very popular Mule Packs and the Wolfman Expedition Saddlebags.
ProCycle Side Racks are compatible with the following top racks
• Pro Moto Billet
• Pat Walsh
• TCI Borrego
• Stock Suzuki (must grind 1/8" off inside of frame mounts)
• 5/8" steel tubing
• Computer precision bending
• Durable powder coat finish
• CNC cut brackets
• Cross-brace included
ProCycle now has separate Right and Left plates that bolt to our rack for mounting your RotoPax fuel or water containers, or any other such device. In addition to just the plates, you can also add a kit that includes the RotoPax Mount as well as a Water or Fuel Container.
ProCycle now has a plate that bolts to our racks for mounting your Monokey Givi hard cases. Pop these onto your rack and your Givi Monokey bags will slide right on and then lock in place just like on any other racks. Now you can swap your Givi bags between bikes and don't need to buy another set. Genuine Givi latches and all the hardware you need to mount them up to your ProCycle Racks included. This is for set of plates both right and left.
New from Moose Racing, Side Racks for the DR650. These are a great companion to the Moose Expedition Side Cases shown below, or the Wolfman Expedition Saddlebags.
These racks are made from precision-shaped 3/4" (18mm) diameter steel tube with motorcycle-specific mounting arms and brackets to assure a proper fit. Machined caps, tabs and spacers add to the mounts dimensional precision. Finished products are then powder coated black with a matte finish.
All hardware is zinc-plated with flange-style heads and nuts are also flange style with nylock or metal locking threads.
Another new design from Happy Trails. 3 mounting points for additional strength. These SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags, or other soft luggage.
For the DR650 These racks need the stock grab handles or Suzuki OEM rack to mount properly.
- Three point mounting system (includes mounting hardware)
- Strong 5/8" round tubing for the arms and mounting loop
- Racks finished with a black powder coat
Complete luggage system with rear top rack and side mounts. Multiple mount points to distribute the load around the rear subframe. No modifications required to the motorcycle to mount the systems. Universal mounting brackets for cases are included. Sturdy Quick disconnect using spring and pin design. Easy on, easy off. Cases sold separately (above). All required hardware is included for installation. All cases require drilling to be used with the universal side brackets.
Sorry, this can not ship to Canada - it's oversized
Ships Parcel Post (6-10 business days) within the US. Why?