Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.

Seats

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Adventure Seat, Moose

XR650L '93 - '22

Moose Racing now makes a seat for us XR650L riders. This is a complete seat already installed on a new seat pan. Take your old one off and put the new one on and get back to riding!

  • Rugged micro-fiber suede top cover provides rider comfort and confidence
  • Side gripper panes keep you aboard during aggressive maneuvering
  • Smooth marine-grade vinyl with debossed Moose Racing logo
  • Comes with strap kit that enables you to confidently secure cargo to the pillion section of your seat
$344.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Adventure Seat, Moose

KLR650 '87 - '18

Moose Racing now makes a seat for us KLR riders. This is a complete seat already installed on a new seat pan. Take your old one off and put the new one on and get back to riding!

  • Rugged micro-fiber suede top cover provides rider comfort and confidence
  • Side gripper panes keep you aboard during aggressive maneuvering
  • Smooth marine-grade vinyl with debossed Moose Racing logo
  • Comes with strap kit that enables you to confidently secure cargo to the pillion section of your seat
$366.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Adventure Seat, Moose

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '22 DRZ400SM '05 - '22

Complete replacement seat.

You must choose between the stock seat height or a low seat height (about 1 inch lower).

  • Rugged micro-fiber suede top cover provides rider comfort and confidence
  • Side gripper panes keep you aboard during aggressive maneuvering
  • Smooth marine-grade vinyl with debossed Moose Racing logo
  • Comes with strap kit that enables you to confidently secure cargo to the pillion section of your seat
Choose Height
$366.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Adventure Seat, Moose

990 Adventure '07 - '13 950 Adventure '03 - '06
  • Rugged microfiber suede top cover provides rider comfort and confidence
  • Side gripper panels keep you aboard during aggressive maneuvering
  • Smooth marine grade vinyl with embossed Moose Racing logo
  • Comes with strap kit that enables you to confidently secure cargo to the pillion section of your seat

Closeout price. Only one left.

$374.95
$299.00
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

Complete Seat, ProCycle

DR650 '96 - '22

The ProCycle seat was designed for both comfort and function. Our seat is built with a premium denser foam for those long days in the saddle also giving you freedom to move while standing.

  • Wide and firm saddle adds comfort on long rides
  • Narrowing taper up front allows room for knees when standing
  • The vinyl weave pattern allows airflow between you and the seat
  • Provides grip down the sides allowing you to hold on with your knees

We will build the seat for you in house on a new seat pan so all you have to do is put it on and go ride.

Add a Seat Warmer and we will install it for free on complete seats.

 

Choose Seat
Add Kit
$309.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Complete Seat, Seat Concepts Comfort

CRF450L '19 - '22 CRF450R '18 - '22 CRF450X '19 - '22 CRF250R '18 - '22 CRF250X '19 - '22

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Developed for Baja racing, our comfort model maintains a similar contour to stock at the front of the seat and tapers out towards the mid-point to distribute rider weight over a greater area. The Comfort seat is wider than stock, but not so wide that it would hinder movement in aggressive race situations.

The comfort model strikes the perfect balance between an aggressive race profile and a wider more comfortable seat.

  • Choose standard height, 1" taller than the stock seat, or 1" lower than stock seat
$284.95

Seat Concepts dual-sport/adventure replacement seats incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Low cut seat gets your feet on the ground a bit easier should you need it.

Carbon fiber style top and sides in stock. Call or email for additional options.

Choose Option
$284.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Complete Seat, Seat Concepts Comfort

WR250R '08 - '22 WR250X '08 - '11

New wider seat to help keep comfortable on that long commute or dual-sport ride.  The Standard Height seat is about 3/16's inch (5mm) taller than the stock height. The Low Version is about 3/4 INCH (19mm) LOWER than the stock seat. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.

Choose Seat
$284.95

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.  Complete seats are built by Seat Concepts on a new seat pan and come ready to be installed on your bike.

Carbon fiber style top and sides are usually in stock. Call or email for additional options.

If you plan on ordering the Low seat, you may want to consider the lowered footpegs as this seat makes for a cramped cockpit, even for shorter riders.

Commuter kit is a seat actually designed for long distance touring and commuting. With a new, wider dished seat area to help keep your bum comfortable on that long commute or dual-sport ride. The added width and foam density will make those long rides even more fun. The kit is based on stock height.

Super Grip - ProCycle Exclusive!

Custom designed by ProCycle for better off-road traction. More grip from a slightly more aggresive top surface and lots more grip for your knees with a material developed for GNCC riders and the tough conditions they encounter. That material was also developed for extreme wear resistance from knee braces.

Choose Seat
$284.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Complete Seat, Seat Concepts Comfort

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '22 DRZ400SM '05 - '22

New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.

The new updated 2.0 version has a sleeker shape and a better fit in the tank area.

Complete Seats come assembled on an aftermarket pan and ready to ride.

This kit is standard height, same as OEM.  Width is 8".

$284.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Complete Seat, Seat Concepts Comfort XL

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '22 DRZ400SM '05 - '22 KLX400 '03 - '04

This Comfort XL seat design is roughly 3" wider overall than their standard comfort seat. This means more surface area, better weight distribution, and added comfort for those not worried about seat width.

Available as Complete Seat only. The Complete Seats come assembled with an aftermarket pan and ready to ride.

Standard Height, same as OEM.  Width is 11"

$304.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Complete Seat, Seat Concepts Comfort LOW

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '22 DRZ400SM '05 - '22 KLX400 '03 - '04

New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.

The new updated 2.0 version has a sleeker shape and a better fit in the tank area.

Complete Seats come assembled on an aftermarket pan and ready to ride.

This kit is 1" (25mm) LOWER than OEM.  Width is 9 1/8".

$284.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Dual Riding Comfort, Corbin Seat

VanVan 200 '17 - '19

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.

Thumbnail

Corbin seats are custom made to order. Allow 3 weeks delivery time

Top Texture
Side Texture
$445.95

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Because Corbin seats are custom made they are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.  You can view all of the available materials and colors on Corbin's Website.

Thumbnail

Corbin seats are custom made to order. Please allow 3 weeks delivery time.

Top Texture
Side Texture
$532.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Dual-Sport Canyon Comfort, Corbin Seat

Himalayan 411 '18 - '19

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Because Corbin seats are custom made they are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.  You can view all of the available materials and colors on Corbin's Website.

Thumbnail

Corbin seats are custom made to order. Please allow 3 weeks delivery time.

Top Texture
Side Texture
$560.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Dual-Sport Canyon Comfort, Corbin Seat

T7 Ténéré 700 '21 - '22

Canyon Dual Sport saddle is designed specifically to provide long range comfort for your Tenere 7. We also offer a Bench style saddle that provides more freedom of movement for riders that lean towards off-road riding.

Our high density Comfort Cell foam allows a sleek profile while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure felt from the stock seat. In the nose area, we sculpt the saddle narrow to allow for good ground reach. Canyon Dual Sport has a seat height between the Yamaha Rally seat and Yamaha Low seat.

Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look.

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Thumbnail

 Please allow 3 weeks delivery time.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.

Top Texture
Side Texture
$560.95

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are custom made and carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Because Corbin seats are custom made to order, Please allow about 2 weeks lead time to have the seat built.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.  You can view all of the available materials and colors on Corbin's Website.

Thumbnail

Corbin seats are custom made to order. Allow 3 weeks delivery time.

Top Texture
Side Texture
$445.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Dual-Sport Riding Comfort, Corbin Seat

Africa Twin (CRF1000L) '16 - '19 Africa Twin (CRF1000L) Adventure Sport ES '16 - '19

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin has replaced the two piece stock unit with a single piece model to provide more structural support.  They've built two models, one to emulate the seat height of the stock seat in the upper position and one to provide an easier ground reach like the stock seat in the low position. By designing each seat specifically, they were able to keep excellent ergonomics and a properly neutralized seating platform.  Corbin's saddle is designed to work with the optional Honda saddlebags. Mounts to the motorcycle similar to stock and secures with the Honda key lock system. All brackets are included and pre-mounted on the seat so it's ready for immediate installation.

Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.

Thumbnail

Corbin seats are custom made to order. Allow 3 weeks delivery time.

Choose Height and Year
Choose Top Texture
Choose Side Texture
$560.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Dual-Sport Riding Comfort, Corbin Seat

CRF450L '19 - '22 CRF450X '19 - '22

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Because Corbin seats are custom made to order. Please allow about 2 weeks lead time to have the seat built.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides. You can view all of the available materials and colors on Corbin's website. If you would like your seat built with something other than the standard choices send an email after placing your order.

Thumbnail

  Corbin seats are custom made to order. Allow 3 weeks delivery time.

Choose Top Texture
Choose Side Texture
$445.95

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.

Thumbnail

  Corbin seats are custom made to order. Allow 3 weeks delivery time

Choose Seat Style
Choose Top Texture
Choose Side Texture
$532.95

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Because Corbin seats are custom made to order. Please allow about 2 weeks lead time to have the seat built.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides. You can view all of the available materials and colors on Corbin's website. If you would like your seat built with something other than the standard choices send an email after placing your order.

!  Corbin seats are custom made to order. Allow 3 weeks delivery time.

Choose Top Texture
Choose Side Texture
$445.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Dual-Sport Riding Comfort, Corbin Seat

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '22 DRZ400SM '05 - '22

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.

Thumbnail

 Corbin seats are built to order. Lead time on building a seat is 2-3 weeks.

 

Choose Top Texture
Choose Side Texture
$445.95

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

We stock: Black Carbon Fiber top with Asphalt sides. Other configurations are custom made to order. Please allow about 2 weeks lead time to have a special seat built.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides. If you would like your seat built with something other than the standard choices send an Email after placing your order. You can view all of the available materials and colors on Corbin's Website listed below.

!  Corbin seats are custom made to order. Allow 3 weeks delivery time

Choose Fitment
Top Texture
Side Texture
$445.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Dual-Sport Riding Comfort, Corbin Seat

DR350 '90 - '99 DR350S '90 - '93 DR350SE '94 - '99

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are custom made and carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Because Corbin seats are custom made to order, Please allow about 2 weeks lead time to have the seat built.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.  You can view all of the available materials and colors on Corbin's Website.

Thumbnail

  Corbin seats are custom made to order. Allow 3 weeks delivery time.

Top Texture
Side Texture
$445.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Dual-Sport Riding Comfort, Corbin Seat

CRF250L '13 - '17 CRF250L Rally '13 - '17

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.

Thumbnail

 Corbin seats are built to order. Lead time on building a seat is 2-3 weeks.

Top Texture
Side Texture
$445.95

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Corbin seats are built to order. Lead time on building a seat is 2-3 weeks.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides. You can view all of the available materials and colors on Corbin's Website listed below.

!  Corbin seats are custom made to order. Allow 3 weeks delivery time

Top Texture
Side Texture
$445.95

The ProCycle seat was designed for both comfort and function. Our seat is built with a premium denser foam for those long days in the saddle also giving you freedom to move while standing.

  • Wide and firm saddle adds comfort on long rides
  • Narrowing taper up front allows room for knees when standing
  • The vinyl weave pattern allows airflow between you and the seat
  • Provides grip down the sides allowing you to hold on with your knees
Choose Seat
Add Kit
$169.95

New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.

 

Choose Cover Option
Add Kit
$179.95

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Each individual seat model has been specially designed to increase comfort without compromising rideability. The more aggressive the bike, the more aggressive the seat-kit.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.

Consider adding on the Seat Warmer below for extra comfort on those cold days!

Thumbnail

  Please allow 1-2 weeks for delivery

Select Model
Add Kit
$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

V-Strom (DL1000) '02 - '11 V-Strom (DL650) '04 - '11

This redesigned shape offers better comfort and support. The new shape also addresses the slope into the tank issue that the stock seat has. This seat is universal and will work with the 650 from 2004 to 2011 and the 1000 from 2002 to 2011. This seat is 1/8 of a inch shorter than the stock 1000 seat and 9/16 taller than the 650 seat. The passenger seating area is larger and also offers a dished shape for better passenger comfort.

Thumbnail

Allow 2 weeks for delivery

Choose Option
Add Kit
$214.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

Africa Twin (CRF1000L) '16 - '22

Seat Concepts makes some of the finest aftermarket seats available. Hand made in Caldwell, Idaho they will make long days in the saddle something you look forward to, not dread. Their custom and proprietary foam formula provides a more plush ride while still offering necessary support. Their unique shape maintains the basic shape of the stock seat at the front, narrower so that the rider's legs are not spread too far, then tapers out towards the mid-point to better distribute the riders weight over a greater area than the stock saddle.

*Front foam and cover with rear cover only.

$234.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

V-Strom (DL650) '12 - '22

For DL650 2012 - current. This new shape offers better comfort and support and also addresses the slope into the tank issue that the stock seat has. The passenger seating area is built up at the front to help the sliding effect into the main rider.

The standard density foam of this kit works good for riders that weigh 170-260lbs. We also offer a firmer foam for heavier riders and a softer foam for lighter riders for no extra cost. Call if you would like a different foam.

Allow 2 weeks for delivery

Add Kit
$214.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

XR400R '96 - '04 XR250R '96 - '04

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Our unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

DR350 '90 - '99 DR350S '90 - '93 DR350SE '94 - '99

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Each individual seat model has been specially designed to increase comfort without compromising ride-ability. The more aggressive the bike, the more aggressive the seat-kit.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.

 

$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

CRF250L '13 - '22 CRF250L Rally '17 - '22

Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points. Each individual seat model was specially designed to increase comfort without compromising ride ability.

Tall seat is 1" taller than stock.  Low seat is 1" shorter than stock.  Default foam density is 160-250lbs. Softer or firmer foam available on request for no extra fee.

Thumbnail

 Please allow 1-2 weeks for delivery

$179.95

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

If you plan on ordering the Low seat, you may want to consider the lowered footpegs as this seat makes for a cramped cockpit, even for shorter riders.

Commuter kit is a seat actually designed for long distance touring and commuting. With a new, wider dished seat area to help keep your bum comfortable on that long commute or dual-sport ride. The added width and foam density will make those long rides even more fun. The kit is based on stock height.

Super Grip - ProCycle Exclusive!

Custom designed by ProCycle for better off-road traction. More grip from a slightly more aggressive top surface and lots more grip for your knees with a material developed for GNCC riders and the tough conditions they encounter. That material was also developed for extreme wear resistance from knee braces.

Choose Seat
Add Kit
$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

CRF450L '19 - '22 CRF450R '18 - '22 CRF450X '19 - '22 CRF250R '18 - '22 CRF250X '19 - '22

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Developed for Baja racing, our comfort model maintains a similar contour to stock at the front of the seat and tapers out towards the mid-point to distribute rider weight over a greater area. The Comfort seat is wider than stock, but not so wide that it would hinder movement in aggressive race situations.

The comfort model strikes the perfect balance between an aggressive race profile and a wider more comfortable seat.

  • Choose standard height, 1" taller than the stock seat, or 1" lower than stock seat
$179.95

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Low cut seat gets your feet on the ground a bit easier should you need it. Uses the pan from your stock seat.

Carbon fiber style top and sides in stock. Call or email for additional options.

Choose Seat
Add Kit
$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '22 DRZ400SM '05 - '22 KLX400 '03 - '04

New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.

The new updated 2.0 version has a sleeker shape and a better fit in the tank area.

Each kit contains instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.

This kit is standard height, same as OEM.  Width is 8".

Add Kit
$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

XR650L '93 - '22 XR600 '88 - '19

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Each individual seat model has been specially designed to increase comfort without compromising rideability. The more aggressive the bike, the more aggressive the seat-kit.

  • Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
  • Choose standard height or one inch lower than stock.
Choose Seat & Cover
Add Kit
$179.95

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.  

Rally Tall seat is built up 1.75 inches and they leveled out the angle of the rider platform to reduce the slope-into-tank feeling of the stock seat.

On the Standard seat they built up the front, but dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

$199.99

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price. This is for a seat cover and foam kit only! You will have to install or have installed. A seat pan is NOT included.

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

Add Kit
$179.95

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Our unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

990 Adventure '07 - '13 950 Adventure '03 - '06

Seat Concepts offers three different versions of their super comfy cover and foam kit for the big KTM. Each will keep you more comfortable on those long rides, whether it be to work or headed down the highway. Also available is an option for you and a passenger - after all, their comfort is important too!

Three Shape Options!

  • Low saddle: Based on the stock seat but wider in the seating area, and with a more dense foam that is approximately 1/2" shorter than the stock flat seat.
  • Tall saddle: Same shape as Low seat described above, but 1.5" taller.
  • 2 Up: A new design meant to provide increased comfort for both pilot and passenger with it's unique shape.
  • This price is for the cover and foam only. Kit does not include the seat pan.
  • Installation is also available. Choose this option below.

These seats are custom order and may take 5-10 days until they ship.

Choose Seat Shape
Select Top Texture
Select Side Texture
Select Stitching
Add Kit
Add Seat Cover Kit Installation
$214.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

WR250R '08 - '22 WR250X '08 - '11

Seat Concepts Dual-Sport/Adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.

Choose Seat
$179.95

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality and comfort at an affordable price.

Add Kit
$179.95

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Height: 7/8" Lower than stock.

Width: 10.5"  - OEM width 7"

Details:
The T700 comfort low seat provides you with 7/8" of drop compared to the OEM seat for increased reach to the ground.

Note:
Available as a Foam & Cover Kit and an option for an OEM Rear Cover replacement cover to match the Kit.

Add Kit
$194.99
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort LOW

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '22 DRZ400SM '05 - '22 KLX400 '03 - '04

New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.

The new updated 2.0 version has a sleeker shape and a better fit in the tank area.

Each kit contains instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.

This kit is 1" (25mm) LOWER than OEM.  Width is 9 1/8".

$179.95

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Height: OEM

Width: 13"  - OEM width 7"

Details:
The T700 comfort sport-touring seat provides you with an increased level of comfort and support to aid with those long days on the bike.

Note:
Available as a Foam & Cover Kit. Also, available with rear comfort foam & cover kit.

Add Kit
$194.99

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Height: 1.25" Taller than stock.

Width: 10.25"  - OEM width 7"

Details:
The T700 Comfort Tall seat provides you with 1.25" of height compared to the OEM seat for increased reach to the ground.

Note:
Available as a Foam & Cover Kit and an option for an OEM Rear Cover replacement cover to match the Kit.

Add Kit
$194.99
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Rally Comfort

Africa Twin (CRF1000L) '16 - '22

The front portion of this saddle is 1" taller than stock. Seat Concepts makes some of the finest aftermarket seats available. Hand made in Caldwell, Idaho they will make long days in the saddle something you look forward to, not dread. Their custom and proprietary foam formula provides a more plush ride while still offering necessary support.

Their unique shape maintains the basic shape of the stock seat at the front, narrower so that the rider's legs are not spread too far, then tapers out towards the mid-point to better distribute the riders weight over a greater area than the stock saddle. For this tall model specifically, they build up the front of the seat, but then dished out the rear slightly to level out the angle of the rider platform. This reduced the angle to eliminate that slide into the tank.

 

$234.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Seat Cover and Strap, OEM

TW200 '87 - '22

Recover that shredded or uniquely colored stock seat cover with this OEM black cover. This includes only the cover material and grab strap. Designed to fit over your stock seat pan and foam.

Thumbnail

  Please allow 1-2 weeks for delivery

Add Kit
$54.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cover, Moose

XR650L '93 - '22

This is a high-quality seat cover done by Moose for the XR650L. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.

  • Heavy duty marine grade vinyl
  • UV protected for long life
  • Double stitched for durability
  • Available in Red or Blue
  • Made in the USA

 

Select Color
Add Kit
$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cover, Moose

DR650 '96 - '22

This is a high-quality seat cover offered by Moose for the DR650. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.

  • Heavy duty marine grade vinyl
  • UV protected for long life
  • Double stitched for durability
Add Kit
$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Seat Cover, Moose

TTR125 '00 - '22

This is a high-quality seat cover done by Moose for the TTR. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.

  • Heavy duty marine grade vinyl
  • UV protected for long life
  • Double stitched for durability
$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cover, Moose

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '22 DRZ400SM '05 - '22

This is a high-quality seat cover done by Moose for the DRZ. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.

  • Heavy duty marine grade vinyl
  • UV protected for long life
  • Double stitched for durability
Add Kit
$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cover, Moose

KLR650 '87 - '18

This is a high-quality seat cover done by Moose for the KLR. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.

  • Heavy duty marine grade vinyl
  • UV protected for long life
  • Double stitched for durability

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

Add Kit
$39.95

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

$69.95
  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
$112.95

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

$79.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Tall Seat, BBR

KLX110 '02 - '22 DRZ110 '03 - '05

Complete replacement tall seat assembly for your KLX110 / DRZ110. Includes plastic seat base, perfectly shaped tall seat foam, and black non-slip seat cover.

  • High density tall seat foam
  • Non-Slip BBR seat cover
$84.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

World Sport Modular Seat System, Sargent

Africa Twin (CRF1000L) '16 - '19 Africa Twin (CRF1000L) Adventure Sport ES '18 - '19

Sargent World Sport Performance Modular Seat System with ZONE SUSPENSION BODY CONTOUR TECHNOLOGY.


Honda Africa Twin, 2016+ (CRF1000L) and
Africa Twin Adventure Sport 2018+ (CRF1000L2) with ZONE SUSPENSION BODY CONTOUR TECHNOLOGY.

Transform your Honda Africa Twin and Adventure Sports into a long-distance explorer! Sargent's patented Zone Suspension Body Contour Technology, beautiful hand-crafted upholstery, and high-quality lightweight precision construction make World Sport Performance Seats the best choice for the long-haul.

In addition, this two-piece World Sport Seat offering for the Honda Africa Twin features marine-grade, UV-stabilized, hand-crafted upholstery specifically designed to maximize the suspension qualities of the Super Cell Foam.

 

 

Select Product
$739.95

Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort. Available in standard height and 2" lower than stock.

Does not fit the the "C" (European) models.

 

Choose Style
$419.95

Sargent's proprietary seat foam has their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for long distance comfort.

Black piping.  Complete seat with matching rear seat cover for 2003 only.

$329.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

World Sport Performance Seat, Sargent

V-Strom (DL650) '04 - '11 V-Strom (DL1000) '02 - '13

Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort.

 

Choose Model and Year
$529.95

Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort. Available in standard height and 1" lower than stock. These seats will fit bikes with the stock, IMS, or other any aftermarket fuel tank.

Choose Seat Height
$419.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

World Sport Performance Seat, Sargent XT-Series

WR250R '06 - '18 WR250X '06 - '11

Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort.

 

$419.95