Suspension

Kit includes all the fork bushings, o-rings, snap rings and washers this kit comes with what it needs to completely rebuild your front fork bushings.

• Bushings are dyno-tested to 500,000 strokes with less wear than OEM bushings
• Kit includes two slider bushings and two leg bushings
• Kit includes all copper washers and O-rings
• Kit includes two fork seal snap rings

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.

Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.

OEM spring rate is .46kg. We offer stiffer spring rates from -5% to 10% for riders who wish to carry luggage or just prefer stiffer suspension.

The little WRs have decent shocks but it can surely be improved with a Rear Shock Gold Valve from Race Tech. This will improve the damping in both directions and make the clickers more responsive to adjustments.

• Bolt-on shock valving for riders serious about suspension performance
• Improves control, traction, plushness and bottoming resistance
• Improved, long-wearing, low-friction sealing design decreases fade
• Includes complete instructions

• Race Tech's original bolt-on fork valving system for front cartridge forks
• Triple the flow area of stock pistons
• Put valving control on the shim stack
• Outstanding tunability; improved control, traction, plushness and bottoming resistance
• Complete instructions, Gold Valve pistons, valving charts, valving shims and "Technical Edge
• Fork Maintenance and Gold Valve Installation" video all included

Kouba lowering link will lower the rear 0.80”. When combined with stock lowered clevis, lowers the rear a total of 1.75”.

Comes with bearings and seals installed for a quick and easy installation. Instructions included.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Complete kit to replace the bearings and seals in the WR shock linkage. Includes the lower shock bearing.

Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.

OEM spring rates are 7.7kg on early models and 8.2kg on later models. We offer stiffer spring rates from 5% to 25% for riders who wish to carry luggage or just prefer stiffer suspension.

Complete Swingarm Bearing kit to replace the bearings and seals in the WR swingarm pivot.