Many suppliers are experiencing HUGE increases in demand and supply chain delays. We appreciate your patience. The quickest way to get your item is to place your order now which guarantees your place in line.
Moose Racing now makes a seat for us KLR riders. This is a complete seat already installed on a new seat pan. Take your old one off and put the new one on and get back to riding!
Complete replacement seat.
You must choose between the stock seat height or a low seat height (about 1 inch lower).
Moose Racing now makes a seat for us XR650L riders. This is a complete seat already installed on a new seat pan. Take your old one off and put the new one on and get back to riding!
The ProCycle seat was designed for both comfort and function. Our seat is built with a premium denser foam for those long days in the saddle also giving you freedom to move while standing.
We will build the seat for you in house on a new seat pan so all you have to do is put it on and go ride.
Add a Seat Warmer and we will install it for free on complete seats.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Developed for Baja racing, their comfort model maintains a similar contour to stock at the front of the seat and tapers out towards the mid-point to distribute rider weight over a greater area. The Comfort seat is wider than stock, but not so wide that it would hinder movement in aggressive race situations.
The comfort model strikes the perfect balance between an aggressive race profile and a wider more comfortable seat.
Width: 7 5/8"
Height: Same as OEM
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
The new updated 2.0 version has a sleeker shape and a better fit in the tank area.
Complete Seats come assembled on an aftermarket pan and ready to ride.
This kit is standard height, same as OEM. Width is 8".
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
The Complete Seats come assembled with an aftermarket pan and ready to ride.
"Will not fit standard L"
Width: 10 3/4"
Height: Same as OEM
New wider seat to help keep comfortable on that long commute or dual-sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike. The Complete Seat comes with an aftermarket pan with the foam and cover kit assembled, ready to ride.
Width: 9.5"
Height: 3/16's inch (5mm) taller than the stock height
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
The Complete Seats come assembled with an aftermarket pan and ready to ride.
Width: 9.5"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
The Complete Seats come assembled with an aftermarket pan and ready to ride.
Fits Model/Years:
2022 KLR 650 ABS, TRAVELER, ADVENTURE
Width: 12 3/4"
Height: Same as OEM
This Comfort XL seat design is roughly 3" wider overall than their standard comfort seat. This means more surface area, better weight distribution, and added comfort for those not worried about seat width.
Available as Complete Seat only. The Complete Seats come assembled with an aftermarket pan and ready to ride.
Standard Height, same as OEM. Width is 11"
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
The Complete Seats come assembled with an aftermarket pan and ready to ride.
"Will not fit the Rally"
Width: 10 3/4"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
Complete seats are built by Seat Concepts on a new seat pan and come ready to be installed on your bike.
Width: 10"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
The Complete Seats come assembled with an aftermarket pan and ready to ride.
Width: 12 3/8"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
The Complete Seat comes with an aftermarket pan with the foam and cover kit assembled, ready to ride.
Width: 11 1/8"
Height: Same as OEM
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
The new updated 2.0 version has a sleeker shape and a better fit in the tank area.
Complete Seats come assembled on an aftermarket pan and ready to ride.
This kit is 1" (25mm) LOWER than OEM. Width is 9 1/8".
The T700 Comfort seat provides you with a wide seating platform compared to the OEM seat for increased comfort during longer rides. Available as a complete seat only including seat base.
Height: Same as stock.
Width: 11"
The T700 Rally seat provides you with an open cockpit for an ideal level of mobility during technical riding. Not designed for comfort.
Available as a complete seat only including seat base.
Height: OEM - Same as stock.
Width: 8"
The T700 Rally - Hard Adventure 2.0 seat provides you with an open cockpit for an ideal level of mobility during technical riding while being accompanied with increase traction for staying planted.
Available as a complete seat only including seat base.
Height: OEM - Same as stock.
Width: 8"
Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.
Comfort Cell Foam retains resiliency and doesn't crush down like the stock foam so we can build a lower seating platform. This gives you good ground reach and balanced riding position. They were also sure to neutralize the seating position to help curb sliding forward in the saddle.
This seat gives you more square inches of body contact and firm support for amazing comfort value. Sculpted to fit the shape of the human body to eliminate centralized pressure on the tailbone. Built up on a Fibertech basepan that is rigid to support the carefully designed foam shape. Corbin's basepan rides on rubber bumpers to avoid scratching the bike.
Installation is just like stock and uses the two rear mounting brackets transferred from your OEM seat on to the Corbin saddle.
Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, no welts, black logo. Picture shows black Grabber seating, Ninja Red side panels, White welts, Black stitching and Medium Silver Corbin logo.
Corbin seats are custom made to order. Allow 3 weeks delivery time
Designed to maximize comfort and usability while providing a custom look and longer riding range. Corbin saddles are shaped to provide contoured support that lasts all day and will become your favorite accessory the first ride out. On this model they've positioned the rider in the sweet spot which greatly improves the ergonomics and feeling of control.
This seat provides platforms that offer an increased area of body contact to give excellent weight dispersion and eliminate hot spots. Neutralized to curb the tendency to slide in the saddle which will greatly reduce fatigue. The shaping of the Corbin saddle relieves centralized pressure and supports from the sides instead. They build the saddle up with their exclusive Comfort Cell foam for a firm, supportive ride that lasts. Comfort Cell will support you for years and will provide a personalized fit after break in (approx 1,500 miles).
Another benefit of neutralized seating is that it creates a nice back support area for the rider. Notice how the step in the saddle gives both platforms a level posture and also creates 6.5 inches of lower back support for the rider. Even with the improved shaping, the Corbin Canyon Dual Sport saddle still provides a clean, flowing line on the bike.
Accepts an optional removable backrest in passenger seating area to add more comfort and security. Corbin's backrest models install with a single screw and adjust easily to copilot's posture. If you're looking to add a little storage to your bike, they also offer a Glovebox option for the rear of your backrest that adds 4 liters of locking storage for your travel essentials. Perfect for spare gloves, water bottles and cell phones.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow 3 weeks delivery time.
This seat provides platforms that offer an increased area of body contact to give excellent weight dispersion and eliminate hot spots. Neutralized to curb the tendency to slide in the saddle which will greatly reduce fatigue. The shaping of the Corbin saddle relieves centralized pressure and supports from the sides instead. They build the saddle up with their exclusive Comfort Cell foam for a firm, supportive ride that lasts. Comfort Cell will support you for years and will provide a personalized fit after break in (approx 1,500 miles).
Accepts a removable backrest for your passenger to add more comfort and security. Corbin's backrest install with a single screw and adjusts easily to your copilot's riding posture.
Looking to add a little storage real easy? Corbin's glovebox option mounts to the rear of the backrest to add four liters of convenient, locking storage. Perfect for all your small travel essentials like GDO remotes, water bottles and your cell phone. Lined on the inside to protect your cargo.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
On the model shown they've used a variety of materials for a custom yet subtle touch. Shown: Black Carbon-Fiber seating, Matte Black sides, Pigeon Grey welts, Silver stitching and Gold Corbin logo. (please specify details at checkout if similar look is desired)
Corbin seats are custom made to order. Please allow 3 weeks delivery time.
Canyon Dual Sport saddle is designed specifically to provide long range comfort for your Tenere 700. We also offer a Bench style saddle that provides more freedom of movement for riders that lean towards off-road riding.
Their high density Comfort Cell foam allows a sleek profile while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure felt from the stock seat. In the nose area, they sculpt the saddle narrow to allow for good ground reach. Canyon Dual Sport has a seat height between the Yamaha Rally seat and Yamaha Low seat.
Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike.
For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's fusebox. All other components are built into the saddle and come preinstalled.
The design shown above includes Black Carbon-Fiber leather seating with Matte Black vinyl contrasting sides and a tasteful color coordinated Smoke Gray welt.
The default cover choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Please allow 3 weeks delivery time.
Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.
Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.
Corbin seats are custom made to order. Allow 3 weeks delivery time
This stepped, dual platform design allowed them to really lower the front position of the saddle. This equates to better ground reach and, naturally, a lower center of gravity. A nice side effect of the stepped seating is that you get a nice bit of back support out of it too. Notice how they've taken this shape and sculpted it to conform to the shape of your body. This provides more square inches of body support and eliminates hot spots.
In the nose area they've drastically reduced the height of the seat. In fact, they literally can't make the nose of the seat any lower than it already is. But don't worry about comfort... although they've cut it down in front, there's still plenty of support and cushion under your rear and thighs while in the riding position. As with all Corbin saddles, they incorporate their Comfort Cell foam material to supply firm comfort for long days on the road (or trail as the case may be).
Shown in the images, they use the "Grabber" material, which helps you stay planted on the bike. This combination of materials works well for the KLR's "go anywhere" environment as well as being extremely durable and visually perfect for any bike color.
If you're a taller rider or just don't have any problem with ground reach, you may want to check out their DISHED and FLAT seat models for the KLR instead.
Saddle installs much like your stock seat and bolts directly to the Kawasaki chassis. The only difference is the simple relocation of a vent hose on the fuel tank (complete instructions included).
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.
Comfort Cell Foam retains resiliency and doesn't crush down like the stock foam so they can build a lower seating platform. This gives you better ground reach and a lower center of gravity. For the off-road enthusiast they were sure to leave enough nose to allow you to slide up the tank and get through the corners faster. Or slide back to skim the front end over the whoops.
As you're seated, the bones in your posterior that take most of your body weight are roughly seven inches apart. Your stock seat at its widest point is about 6.5". This actually makes the foam of the stock seat crush in and applies pressure to the center of your body. The Corbin model is much wider (11 inches) and is built with denser, sculpted foam that supports your body weight over a greater area and equalizes pressure.
Installation is simple with a tongue in the front and two bolts into the saddle from the sides just like stock.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow 3 weeks delivery time.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow 3 weeks delivery time
Their high density Comfort Cell foam allows a slim profile while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. In the nose area, they sculpt the saddle narrow to allow for good ground reach. As you can see, the Dual Platform saddle provides seating much lower than the stock unit.
The stepped, dual platform design allowed them to really lower the front position of the saddle. This equates to better ground reach and, naturally, a lower center of gravity. A nice side effect of the stepped seating is that you get a nice bit of back support out of it too.
They've taken this shape and sculpted it to conform to the shape of your body. This provides more square inches of body contact and eliminates the pressure points where the leg bones meet the butt bone. Although it takes a bit to really break in a Corbin saddle (1,500 miles), you will notice this improvement right away.
Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look.
The design shown above includes Black Carbon-Fiber leather seating with Matte Black vinyl contrasting sides and a tasteful black stitch pattern. A wide variety of material and color options are available to suit your taste.
If you don't have any problem with ground reach or are looking for something to support more aggressive riding, you may want to check out the Rally seat model for the KLR instead.
Saddle installs much like your stock seat and bolts directly to the Kawasaki chassis. They supply shorter spacers to use with your stock bolts when installing the Corbin saddle. Complete instructions included.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.
Comfort Cell Foam retains resiliency and doesn't crush down like the stock foam so they can build a lower seating platform. This gives you better ground reach and a lower center of gravity. For the off-road enthusiast they were sure to leave enough nose to allow you to slide up the tank and get through the corners faster. Or slide back to skim the front end over the whoops.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow 3 weeks delivery time
Comfort Cell foam retains resiliency and doesn't crush down like the stock foam so they can build a lower seating platform. This gives you better ground reach and balanced riding position. For the off-road enthusiast they were sure to leave enough nose to allow you to slide up the tank and get through the corners faster.
As you're seated, the bones in your posterior that take most of your body weight are roughly seven inches apart. Your stock seat at its widest point is about 6.5". This actually makes the foam of the stock seat crush in and applies pressure to the center of your body. The Corbin model is much wider (nine and a half inches) and is built with denser, sculpted foam that supports your body weight over a greater area and equalizes pressure.
Shown here with Carbon Fiber leather seating, Asphalt vinyl sides and a Ninja Red welt for a nice custom touch. The traditional Corbin logo is stitched right into the side panel. Installation is simple with a tongue in the front and two bolts into the saddle from the sides just like stock.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow at least 3 weeks delivery time.
Comfort Cell retains resiliency and doesn't crush down like the stock foam so we can build a lower seating platform. This gives you better ground reach and a lower center of gravity. For the off-road enthusiast we were sure to leave enough nose to allow you to slide up the tank and get through the corners faster. Or slide back to skim the front end over the whoops.
As you're seated, the bones in your posterior that take most of your body weight are roughly seven inches apart. Your stock seat at its widest point is 6.5". This actually makes the foam of the stock seat crush in and applies pressure to the center of your body. The Corbin model is a full 9.5" and is built with denser, sculpted foam that supports your body weight over a greater area and equalizes pressure. If you consider actual seating surface, the Corbin model gives you almost 300% more body contact! Long story short, greater riding comfort!
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. To add a bit of flair, they also an embossed material in a variety of colors that gives the look of Carbon Fiber. The one shown has their Blue Carbon-Fiber vinyl, they also offer black, silver (shown in side panels), yellow and green to match your KLX. The traditional Corbin tag has been replaced with a tasteful Corbin logo stitched right into the contrasting side panel. Installation is simple and just like stock.
You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom built to order. Lead time on building a seat is 2-3 weeks.
Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.
Comfort Cell Foam retains resiliency and doesn't crush down like the stock foam so they can build a lower seating platform. This gives you better ground reach and balanced riding position. For the off-road enthusiast we were sure to leave enough nose to allow you to slide up the tank and get through the corners faster.
As you're seated, the bones in your posterior that take most of your body weight are roughly seven inches apart. Your stock seat at its widest point is about 6.5". This actually makes the foam of the stock seat crush in and applies pressure to the center of your body. The Corbin model is much wider and is built with denser, sculpted foam that supports your body weight over a greater area and equalizes pressure.
The cover is made with the highest grade of weather resistant materials for durability and long life. To add a bit of traction, they like the black "Grabber" material on the top seating area with Asphalt vinyl in the side panels for accent. Installation is simple with a tongue in the front and two bolts into the chassis at the sides. Seat mounting brackets are included.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow 3 weeks delivery time
Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat.
Precision fit to the tank and side panels, Corbin's Dual Sport saddle works with aftermarket tanks too! 1 1/4 inches lower to make for an easier reach to the ground. High density infinite ratio space foam allows us to lower the saddle while maintaining a resilient comfortable ride. Unique contoured shape, combined with high quality space foam provides long range comfort on Dual Sport machines.
Can be color coordinated with a wide range of color options to customize the look of your DR.
Installation: Mounts with the two "L" brackets transferred from your stock seat.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow 3 weeks delivery time.
Comfort Cell retains resiliency and doesn't crush down like the stock foam so they can build a lower seating platform. This gives you better ground reach and balanced riding position. For the off-road enthusiast we were sure to leave enough nose to allow you to slide up the tank and get through the corners faster.
As you're seated, the bones in your posterior that take most of your body weight are roughly seven inches apart. Your stock seat at its widest point is about 6.5". This actually makes the foam of the stock seat crush in and applies pressure to the center of your body. The Corbin model is much wider and is built with denser, sculpted foam that supports your body weight over a greater area and equalizes pressure.
On the model shown above, they used their Carbonium material in the seating with contrasting Asphalt vinyl in the side panels. Saddle installation is simple with a tongue in the front and two bolts into the saddle from under the rear fender.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'No Welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow 3 weeks delivery time.
Corbin has replaced the two piece stock unit with a single piece model to provide more structural support. They've built two models, one to emulate the seat height of the stock seat in the upper position and one to provide an easier ground reach like the stock seat in the low position. By designing each seat specifically, they were able to keep excellent ergonomics and a properly neutralized seating platform. Corbin's saddle is designed to work with the optional Honda saddlebags. Mounts to the motorcycle similar to stock and secures with the Honda key lock system. All brackets are included and pre-mounted on the seat so it's ready for immediate installation.
Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike. Please note, the Corbin backrests may not work in the saddle if you are using the Honda trunk.
Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.
The design shown includes Black Grabber seating with Asphalt vinyl contrasting sides and nose with a tasteful color coordinated welt. Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Please allow 3 weeks delivery time.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.
Comfort Cell Foam retains resiliency and doesn't crush down like the stock foam so they can build a lower seating platform. This gives you better ground reach and a lower center of gravity. For the off-road enthusiast they were sure to leave enough nose to allow you to slide up the tank and get through the corners faster. Or slide back to skim the front end over the whoops.
As you're seated, the bones in your posterior that take most of your body weight are roughly seven inches apart. Your stock seat at its widest point is 8". This actually makes the foam of the stock seat crush in and applies pressure to the center of your body. The Corbin model is a full 11" and is built with denser, sculpted foam that supports your body weight over a greater area and equalizes pressure. If you consider actual seating surface, the Corbin model gives you over 200% more body contact! Long story short, greater riding comfort!
On the top, they cover it with only the highest grade of weather resistant materials for durability and long life. To add a bit of flair, they offer an embossed material in a variety of colors that gives the look of Carbon Fiber (they do not recommend using leather in these saddle models). Shown here with Black Carbon-Fiber seating, Asphalt sides and Tomato Red welts.
Saddle mounts similar to stock with two bolts into the chassis. In order to provide a closer fit to the bodywork and tank, it is necessary to mount the supplied seat bracket to the bike first, then mount the seat to the bracket. Illustrated instructions can be found here.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Corbin seats are custom made to order. Allow 3 weeks delivery time.
The ProCycle seat was designed for both comfort and function. Our seat is built with a premium denser foam for those long days in the saddle also giving you freedom to move while standing.
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
The new updated 2.0 version has a sleeker shape and a better fit in the tank area.
Each kit contains instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
This kit is standard height, same as OEM. Width is 8".
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
Rally Tall seat is built up 1.75 inches and they leveled out the angle of the rider platform to reduce the slope-into-tank feeling of the stock seat.
On the Standard seat they built up the front, but dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Width: 12.5"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
On this model, we dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!
This is for ONLY the Foam & Cover and it DOES NOT include the seat pan(s).
Width: 11 3/4"
Height: Same as OEM standard model stock seat, 1" LOWER if used on an Adventure Sport model.
For DL650 2012 - 2016. This new shape offers better comfort and support and also addresses the slope into the tank issue that the stock seat has. The passenger seating area is built up at the front to help the sliding effect into the main rider.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Allow 3-4 weeks for delivery
"Photo may not represent exact cover option."
Width: 14.5"
Height: Same as OEM
New wider seat to help keep comfortable on that long commute or dual-sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike. The Foam and Cover Kit is only for the OEM pan. It DOES NOT include the pan.
Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
Width: 9.5"
Height: 3/16's inch (5mm) taller than the stock height
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!
The Foam and Cover Kit is only for the OEM pan. It DOES NOT include the pan.
Width: 13"
Height: 3/8" (10mm) LOWER than the stock seat
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Foam & Cover Kit for OEM pan
"Will not fit standard L"
Width: 10 3/4"
Height: Same as OEM
Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.
Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality and comfort at an affordable price.
Width: 10.5"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Available as a Foam and Cover Kit for OEM pan.
Fits Model/Years:
2022 KLR 650 ABS, TRAVELER, ADVENTURE
Width: 12 3/4"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Available as a Foam and Cover Kit for OEM pan.
Width: 12 3/8"
Height: Same as OEM
Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Each individual seat model has been specially designed to increase comfort without compromising rideability. The more aggressive the bike, the more aggressive the seat-kit.
Available as a Foam and Cover Kit for OEM pan. Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
Width: 11 1/8"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Developed for Baja racing, their comfort model maintains a similar contour to stock at the front of the seat and tapers out towards the mid-point to distribute rider weight over a greater area. The Comfort seat is wider than stock, but not so wide that it would hinder movement in aggressive race situations.
The comfort model strikes the perfect balance between an aggressive race profile and a wider more comfortable seat.
Available as a Foam & Cover Kit for OEM pan.
Width: 7 5/8"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Available as a Foam and Cover Kit for OEM pan.
Width: 10"
Height: Same as OEM
Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Each individual seat model has been specially designed to increase comfort without compromising rideability. The more aggressive the bike, the more aggressive the seat-kit.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan. Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
Consider adding on the Seat Warmer below for extra comfort on those cold days!
Please allow 3-4 weeks for delivery
Width: 10"
Height: Same as OEM
Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points. Each individual seat model was specially designed to increase comfort without compromising ride ability.
Available as a Foam & Cover Kit for OEM pan
Width: 9"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Foam & Cover Kit for OEM pan
"Will not fit the Rally"
Width: 10 3/4"
Height: Same as OEM
Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points. Each individual seat model was specially designed to increase comfort without compromising ride ability.
Available as a Foam & Cover Kit for OEM pan
Default foam density is 160-250lbs. Softer or firmer foam available on request for no extra fee.
Please allow 3-4 weeks for delivery
Width: 9 3/4"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan. Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
Width: 8" (widest point located in the rear seating area)
Height: Same as OEM
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Width: 9.5"
Height: Same as OEM
Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Each individual seat model has been specially designed to increase comfort without compromising ride-ability. The more aggressive the bike, the more aggressive the seat-kit.
Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Width: 9 1/4"
Height: Same as OEM
Note:
This seat is based on the off-road version of this bike. The street version is 1 inch lower than this seat.
Note: Will NOT fit DRZ 250
Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.
Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price. This is for a seat cover and foam kit only! You will have to install or have installed. A seat pan is NOT included.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Width: 10.5"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Width: 9.5"
Height: Same as OEM
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Width: 8.5"
Height: Same as OEM
Available as a Foam and Cover Kit for OEM pan only.
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
The new updated 2.0 version has a sleeker shape and a better fit in the tank area.
Each kit contains instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
This kit is 1" (25mm) LOWER than OEM. Width is 9 1/8".
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
With this seat having so little foam to be able to make it a low, there is a sacrifice in comfort. The T700 comfort low seat provides you with 7/8" of drop compared to the OEM seat for increased reach to the ground.
Height: 7/8" Lower than stock.
Width: 10.5" - OEM width 7"
Available as a Foam & Cover Kit and an option for an OEM Rear Cover, replacement cover to match the Kit.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Height: OEM
Width: 13" - OEM width 7"
Details:
The T700 comfort sport-touring seat provides you with an increased level of comfort and support to aid with those long days on the bike.
Note:
Available as a Foam & Cover Kit. Also, available with rear comfort foam & cover kit.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Height: 1.25" Taller than stock.
Width: 10.25" - OEM width 7"
Details:
The T700 Comfort Tall seat provides you with 1.25" of height compared to the OEM seat for increased reach to the ground.
Note:
Available as a Foam & Cover Kit and an option for an OEM Rear Cover replacement cover to match the Kit.
The front portion of this saddle is 1" taller than stock. Seat Concepts makes some of the finest aftermarket seats available. Hand made in Caldwell, Idaho they will make long days in the saddle something you look forward to, not dread. Their custom and proprietary foam formula provides a more plush ride while still offering necessary support.
Their unique shape maintains the basic shape of the stock seat at the front, narrower so that the rider's legs are not spread too far, then tapers out towards the mid-point to better distribute the riders weight over a greater area than the stock saddle. For this tall model specifically, they build up the front of the seat, but then dished out the rear slightly to level out the angle of the rider platform. This reduced the angle to eliminate that slide into the tank.
The Africa Twin Rally seat works with either the Comfort rear foam and cover kit, or the matching Rally rear kit, which makes a flat surface that allows the rider to use the full length of the seating area, making it the best choice for aggressive offroad situations.
This is a high-quality seat cover done by Moose for the XR650L. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.
This is a high-quality seat cover offered by Moose for the DR650. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.
This is a high-quality seat cover done by Moose for the DRZ. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.
This is a high-quality seat cover done by Moose for the TTR. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.
This is a high-quality seat cover done by Moose for the KLR. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Recover that shredded or faded stock seat cover with this Moose Racing cover. This includes only the cover material. Designed to fit over your stock seat pan and foam.
Recover that shredded or uniquely colored stock seat cover with this OEM black cover.
This includes only the cover material (grab strap is no longer available).
Designed to fit over your stock seat pan and foam.
Please allow 1-2 weeks for delivery
This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.
9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.
Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.
Complete replacement tall seat assembly for your KLX110 / DRZ110. Includes plastic seat base, perfectly shaped tall seat foam, and black non-slip seat cover.
Sargent World Sport Performance Modular Seat System with ZONE SUSPENSION BODY CONTOUR TECHNOLOGY.
Honda Africa Twin, 2016+ (CRF1000L) and
Africa Twin Adventure Sport 2018+ (CRF1000L2) with ZONE SUSPENSION BODY CONTOUR TECHNOLOGY.
Transform your Honda Africa Twin and Adventure Sports into a long-distance explorer! Sargent's patented Zone Suspension Body Contour Technology, beautiful hand-crafted upholstery, and high-quality lightweight precision construction make World Sport Performance Seats the best choice for the long-haul.
In addition, this two-piece World Sport Seat offering for the Honda Africa Twin features marine-grade, UV-stabilized, hand-crafted upholstery specifically designed to maximize the suspension qualities of the Super Cell Foam.
Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort.
Sargent's proprietary seat foam has their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for long distance comfort.
Black piping. Complete seat with matching rear seat cover for 2003 only.
Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort. Available in standard height and 2" lower than stock.
Does not fit the the "C" (European) models.
Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort. Available in standard height and 1" lower than stock. These seats will fit bikes with the stock, IMS, or other any aftermarket fuel tank.
Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort.
Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort.
Please allow 1-2 weeks for delivery
