Original Suzuki factory replacement levers for your DRZ400S/SM/E
First there was the Warp 9 "4-Finger" Lever, now there is the Warp 9 "3-Finger" Lever Exclusive to ProCycle. These are a full half inch shorter. You asked for 3-finger levers, and we had Warp 9 make them for us. Brake lever includes a nice billet clamp with nylon sleeve to allow the assembly to rotate on impact. Will not fit with the stock OEM wind deflectors.
Will not engage the clutch switch on 2010 and later models
We have worked closely with Magura to come up with a kit that fits properly.
Want an easier pull on your DR clutch? No cable to break? Then say hello to the Magura Hymec Hydraulic Clutch. Simply remove the stock perch, lever and cable in bolt this in its place. This system replaces the stock cable with a small lightweight hydraulic system for improved clutch control, easier operating pressure, a constant pressure point and smoother actuation.
Developed over many years and tested under the toughest conditions possible in the off-road motorcycle world. World champions to novices all agree on the benefits of the Hymec Hydraulic Clutch system. Due to demand, Magura is now making this available for many dual-sport motorcycles, and now the DR650!
Never hurts to have a bit of the Margura specific Blood Red hydraulic fluid sitting on your shop bench. 4 oz. bottle available as an option.
Forged aluminum, black anodized arm and Knurled CNC aluminum shift tip.
This bracket mounts between the frame and your right footpeg bracket (works with both stock and low mounts) and allows you to adjust the slop out of the stock system. Puts the pedal in the ultimate location for immediate brake activation and eliminates unwanted pedal motion. Kit includes plate, adjuster bolt and lock nut and instructions.
Replacement shift lever with folding tip for use with OEM footpegs.
Replacement shift lever from IMS with folding tip.
The MAGURA HYMEC hydraulic clutch system gives you an ease and smoothness of pull that cannot be equaled by a cable unit. No need to lube the cable, no more broken cables. The HYMEC is simply a fantastic hydraulic retrofit clutch system. You will be able to get away with applying a lot less pressure than with a standard cable clutch. Depending on riding style, this can make for huge benefits in terms of riding comfort and control. The master cylinder control naturally has reach adjustment.
The advantages of the MAGURA hydraulic clutch are many:
MAGURA favors use of their 'MAGURA Blood' for its clutch systems. Mineral oil is non-toxic and not hygroscopic. Regular changes of the clutch fluid are not required.
Did you fall and break your shift lever on your TW200? Replace it with a quality Moose shift lever.
Warp 9 Flex 3-Finger Levers are machined Billet, anodized and hinged levers with CNC machined master cylinder interfaces.
Adjustable reach allows customization to the rider's hand size.
Double hinge design allows lever to flex out of the way in most impact situations.
Pushrod or Bearing contact styles for smooth modulation.
This rotating shift tip provides 6 different positions, offer more sensitive shift position adjustment. Shift arm is made of A2014 forged aluminum for durability and is black anodized. Foldable shift tip is made of CNC aluminum with knurled finish for better shift grip. Replacement shift tips and tip mounts are available.
The high rigid and light weight design, provides better control of the rear brake. Clevis body is made of A7009-T6 aluminum. Comes with a specially designed stainless steel pin.
Here's a set of Shorty brake and clutch levers for your 2001 and newer Tdub.
MAGURA HYMEC – AN EASY TO INSTALL ALTERNATIVE TO A MECHANICAL CLUTCH.
This system replaces the clutch lever and cable – with a small lightweight hydraulic system for improved clutch control. The Hymec ensures an easier operating pressure, a constant pressure point, no more cable adjustment and smooth clutch actuation to ensure the perfect take-off every time. Hymec significantly improves vehicle performance – it allows the user to feel the point where the clutch releases and actuates. This product has been developed over many years and been tested under the toughest conditions possible in the world of motorcycle off-road sport. It has been used by world champion riders who all agree as to the benefits but it is just as useful to the complete novice who stalls at the traffic lights.
Sold Individually
Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.
Replacement steel shift lever with folding tip
Quality replacement levers. Standard length.
The Warp 9 shift lever is 7075T6 CNC arm, the Warp 9 logo is laser etched into the finish.
Includes a black folding aluminum tip and stainless spring and pivot pin for years of rust free use.
1" longer than stock
Do you have lowered foot pegs and can’t get your brake pedal adjusted low enough?
The tip of this heavy duty JNS rear brake lever is 1.0” lower than the factory component and will get you back in the proper range of adjustment.
ONLY FITS 2012-CURRENT KLR650
Folding tip, forged aluminum shift lever from BBR Motorsports. Stronger and lighter than the stock shift lever.
Folding tip, forged aluminum shift lever from BBR Motorsports. Stronger and lighter than the stock shift lever.
A set of replacement brake and clutch levers. Polished alloy.
The Magura Hymec Hydraulic Clutch system. Simply remove the stock perch, lever and cable and bolt this in its place. This system replaces the stock cable with a small lightweight hydraulic system for improved clutch control, easier operating pressure, a constant pressure point and smoother actuation. Developed over many years and tested under the toughest conditions possible in the off-road motorcycle world.
You will have to bypass your clutch safety switch to use this unit.
Never hurts to have a bit of the Margura specific Blood Red hydraulic fluid as well.
Warp 9 has created a beautiful brake pedal machined from billet aluminum to an 8mm thick work of art. A stainless steel pin eliminates wear in the frame. This pedal has the ability to move the spring loaded brake tip 10mm either way from the center position. The arm is arched to provide clearance for riders who have the lowpeg + centerstand combination.
Zeta Revolver Shift Lever
Replacement shift lever with folding tip.
A set of polished aluminum replacement brake and clutch levers.
Forged aluminum, black anodized arm and Knurled CNC aluminum shift tip.
Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.
To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.
The high rigid and light weight design, provides better control of the rear brake.
The clevis body is made of A7009-T6 aluminum. Comes with a specially designed stainless steel pin.
Replacement shift lever from IMS with folding tip.
Fit Disc Brake Models Only
Folding tip, forged aluminum shift lever from BBR Motorsports. Stronger and lighter than the stock shift lever.
- Pivot CP clutch and brake lever set for Trail models.
- Lever folds outward to prevent breakage in the event of a crash.
- Lever adapter is ultra precise CNC machined out of high grade aluminum for super light weight design.
OE style clutch or brake lever.
The Warp 9 shift lever is black anodized and the Warp 9 logo is laser etched into the finish. Comes with a black anodized knurled aluminum tip that folds and returns via a stainless-steel return spring. Includes the pinch bolt as well.
New from Twin Air, a forged aluminum KLR650 folding shift lever with your choice of Black, Blue, or Green tip. These are 3/4" longer than the stock lever which makes for easier shifting while standing, as well as for those with a larger boot size.
Original Kawasaki factory replacement levers for your KLX230.
OEM Style aftermarket replacement brake and clutch levers. Standard length.
Available as a set or individual.
Please notice that this set is for '90-'09 DR650.
Competition levers by Moose Racing incorporate a cast aluminum lever with silicone grip inserts and anti-friction bronze bushings
These levers will only fit the DIRT ONLY model! If your bike has a license plate, these levers will NOT fit.
Warp 9 Flex Brake Levers are machined Billet, anodized and hinged brake levers with CNC machined master cylinder interfaces.
Adjustable reach allows customization to the rider’s hand size.
Double hinge design allows lever to flex out of the way in most impact situations.
Pushrod or Bearing contact styles for smooth brake modulation.
Titanium Pivot / Black levers with laser-etched Warp 9 logo CNC Billet Brake pedal.
Moose Racing has teamed up with Hammerhead to bring you the ultimate shift lever. The forged shift lever arm is manufactured from aircraft-grade 6061 aluminum and anodized in a matte finish. The shift lever tip is a finely machined full CNC part with stainless steel spring and anodized with UV protection to preserve color.
These tips are for the Warp 9 Shift Levers only.
These are held to the cast Warp 9 lever with a pin and e-clip making them easy to change out. Includes new pin and e-clip in case you lose yours.
You can also order just a new pin hardware kit which comes with new pin and clip.
Replace your Bent or Broken Levers.
TW200 fitment 1987-2000 year models with Drum Front Brake or 2001-2014 year models with Disc Front Brake.
Replace the soft stock lever with sturdy forged aluminum.
Folding tip prevents snagging.
Hardened splines won't slip or rotate.
The Warp 9 shift lever is black anodized and the Warp 9 logo is laser etched into the finish. The black anodized knurled aluminum tip is folding and returns via a stainless-steel return spring. Includes the pinch bolt as well.
The tip is replaceable in the event of damage.
Replacement folding shift lever, stock length made by IMS.
Genuine Suzuki replacement brake and clutch levers. Standard length.
Available as a set or individual.
Please notice that this set is for '10-current DR650.
A set of replacement brake and clutch levers. Standard length.
Please be sure and order the correct levers for your model year KLR.
Note: Gen 1 levers are black
Gen 2 levers are Silver
This anodized billet piece, brings a touch of color to your bike. Available in red or blue, it replaces the stamped steel clevis that connects your brake pedal to the master cylinder.
Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.
Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.
A set of replacement brake and clutch levers. Standard length.
Quality genuine Honda replacement levers. Standard length.
CNC Machined high quality aluminum folding levers.
Lever folds outward to prevent breakage in the event of a crash.
Automatic lever position restoration provides quick recovery from the crash.
Ultra precision machine cut for super light weight construction, high precision and quality.
Available in 4 finger lever length to fit your riding style.
Made of durable aluminum for extreme strength. Titanium color anodized finish.
Sold Individually
CNC Machined high quality aluminum folding levers.
Lever folds outward to prevent breakage in the event of a crash.
Automatic lever position restoration provides quick recovery from the crash.
Ultra precision machine cut for super light weight construction, high precision and quality.
Available in 3 and 4 finger lever lengths to fit your riding style.
Made of durable aluminum for extreme strength. Titanium color anodized finish.
Sold Individually
CNC Machined high quality aluminum folding levers.
Lever folds outward to prevent breakage in the event of a crash.
Automatic lever position restoration provides quick recovery from the crash.
Ultra precision machine cut for super light weight construction, high precision and quality.
Available in 3 and 4 finger lever lengths to fit your riding style.
Made of durable aluminum for extreme strength. Titanium color anodized finish.
Sold Individually
Quality replacement levers. Standard length.
Order up your new levers here! If you keep breaking levers, you might want to think about a set of handguards to protect them in case of a fall.
Here is the little switch that mounts inside your brake or clutch lever perch and controls the brake light or clutch safety circuit. This switch often gets damaged in an unplanned dismount (aka: crash) or the plastic simply cracks from age. When this happens, you can find yourself chasing a short circuit that keeps blowing your fuse every time the brakes are applied. If this has happened to your TW, here's the fix!
A stock replacement brake pedal for the DR650. Nothing fancy but sure gets the job done. Just order it up and get back on the trail. See our Brake Pedal Adjuster Bracket that allows you to adjust the position of your brake pedal to perfection.
