Silver Excel rims are lighter and much stronger than the stock steel rims.
Choose either:
Genuine SKF wheel bearings. Single row deep groove ball bearings with seals on both sides are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
Includes all wheel bearings and new dust seals.
The rear kit includes the bearing and seal for the cush drive hub (sprocket carrier). All bearings are sealed on both sides.
High Quality Replacement Wheel Bearings and Seals for your TTR125 with disc brakes.
Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.
Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.
Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.
Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.
Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.
The rubber coated outside diameter creates an optimum seal at the hub.
Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.
| Description | QTY per Kit |
| Ball Bearing | 2 |
| Seal | 2 |
Really like your stock vacuum petcock and never having to worry about turning it off? Did the seals go bad and it leaks? Plugged up? Well, whatever your troubles, here is your replacement. Vacuum operated so you never have to turn it off! Just like the stock unit. Includes mounting bolts with washers, fuel line, clamps and a protecting coil wrap.
Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?
These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.
These great grip pads give you that improved relationship between you and your machine. You will feel the difference the minute you throw your leg over. Squeeze your tank and feel what a solid seat position is and does for you. They will assist in reduction of vibration, increase in control, and increase in comfort.
Will also help you cover wear spots on your tank whether it be the stock metal or a plastic tank. We tested had a couple sets of these on bikes with plastic tanks for at least 3 years and saw no signs of bubbling, peeling or coming off in any way.
Included with the tank:
Sintered Pads are best for regular riding. Long life, and good performance in all conditions
DP brakes are available in two different compounds for the DR.
The standard Sintered metal material pads provide powerful braking with industry-high HH+ friction rating that is equally adept in wet or dry conditions. They have a quick break-in period and excellent initial response. An oxide-based ceramic material on the rear of the backing plate keeps heat away from the caliper piston and fluid in extreme conditions giving a fade-free performance in even the harshest conditions.
The material in the Special Pads was developed by pro riders in the MX, Supercross, Enduro and Off-Road world where performance and good durability are essential.
Includes front and rear brake pads.
Double-H sintered metal brake pads feature the HH friction rating, the highest in the industry. These pads provide maximum brake effect and last twice as long as organic pads.
Set includes pads for both front calipers.
All the parts you need to freshen up your brake master cylinder. New piston, seals, return spring, boot and snap ring.
Full braking power for your KLR650 supermoto conversion. 320mm oversized disc has a lightweight forged alloy center-hub and tough billet steel, 4mm thick brake rotor for maximum stopping power. Rotor rings include OD cooling groove and extra weight-reducing scraper holes and are riveted together with a nine-button sturdy rivet system.
Fully wraps the chain to guide it onto the rear sprocket. Stainless steel hardware, anodized aluminum plate, and plastic buffer for low friction. Saves expensive engine cases.
Black hard anodized alloy sprocket. Machined sprockets made from 7075 T651 aluminum reduces distortion and provides optimal thickness, to extend sprocket and chain life.
FRITZCO front sprockets are a straight up no hassle installation. Their sprockets are machined from alloy steel that in every way is comparable to OEM Yamaha and the best offered by other manufactures. The sprockets are then given a heat treatment that provides a compatible sprocket for the Yamaha output shaft and longest chain wear life possible.
Replacement brush plate kit fits both original stock or aftermarket starter motor.
Excellent midrange and top-end increase. Uses stock valve springs and rockers.
Complete big bore kit. Bolt it on and ride!
This beautiful polished rear carry rack from B&B Eng. is made from aluminum tubing and 4mm 5083 plate. 5083 is used because of its suitability for welding and high level of abrasion and impact resistance. Kit includes all the necessary stainless clamps and bolts. With the roundness and strength of the tubing supports, it makes a great grab handle when you need to lift the rear of the motorcycle.
The GearLok Lock with Cable utilises a 150cm long braided galvanized steel plastic coated cable to lock your helmet, jacket, backpack or any other accessory to your bike.
Simply pass the loop end of the cable through a convenient part of your bike like the frame, handlebar or grab rail. Thread the other end through the loop and then through the object/s you want to secure. Next, insert the end of the cable into the lock slot and slide the lock up or down the cable to adjust the length.
Press the Snap Button till you hear a "Click" and scramble the four (4) digit security dial…done! Your items are now secured to your bike.
Fuel range and water storage is a concern of every adventurer. Easily carry 1l to 1.5l fuel or water bottles with the OBR ADV Gear Bottle Wrap. The OBR ADV Gear Bottle Wrap is a versatile solution to carry varying sizes of fuel/water bottles anywhere on your luggage kit. The OBR ADV Gear Bottle Wrap is a basic wrap panel with a series of web loops that allows secure fuel/water bottle attachment via your existing luggage straps.
Features
* Fuel bottle not included
Add a ProCycle Thermal Tumbler for a great value here.
The Buckin’ Roll is a slim, trim, minimalist tank bag designed to keep essentials close at hand while out of the way when riding the most technical singletrack. This easy-to-mount tank bag features fully welded construction with waterproof coated materials and provides 1.5 liters of packable volume for carrying a smartphone, wallet, snacks, smaller tools, or an extra pair of gloves.
An integrated clear smartphone pocket in the lid with electronics cable pass-through enables on-bike charging and power inside the bag. For those searching for the perfect tank bag for aggressive trail riding where quick, easy access to items is a priority, the Buckin’ Roll is the ideal choice.
Keep essential items easily accessible with the OBR ADV Gear High Basin Tank Bag. The OBR ADV Gear High Basin Tank Bag attaches/secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable strap at the front. Utilize the included interchangeable stow pocket for additional top storage or the map pocket to keep your route in constant view.
Features
Keep essential items easily accessible with the OBR ADV Gear Big Sky Tank Bag. The OBR ADV Gear Big Sky Tank Bag utilizes a detachable base panel that attaches and secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable buckle strap at the front. A padded spacious main compartment is perfect for carrying those items you wish to keep close such as cameras, documentation, rain jacket, etc. Two smaller lid pockets sit above the main pocket for storage of smaller items. Designed with the larger ADV bikes in mind, but will also fit the Enduro and Mid-Size Dual Sports.
Features:
The OBR ADV Gear Tank Saddlebag Bag drapes over your motorcycles tank and attaches utilizing a center panel for screw on fuel caps (adjustable hook/loop straps for ADV bikes with flip fuel caps is coming soon). Each bag is constructed from extremely durable Ballistic Nylon material and heavy duty #10 zippers. Great for storing tire repair tools, chain lube, fuel stabilizer, spare tubes, rain gear, trail snacks, etc. Helps to keep weight low and out of the way of the rider for improved bike handling.
Features:
Extend your storage options with OBR ADV Gear Crash Bar Storage Bags. The Crash Bar Storage Bag attaches to your motorcycles lower crash bars via a series of one wrap Velcro tabs. Each bag is constructed from extremely durable Ballistic Nylon material and heavy duty #10 zippers. Great for storing tire repair tools, chain lube and/or fuel stabilizer, spare tube, rain gear, etc. Helps to keep weight low and out of the way of the rider.
Features
Need some extra protection from Mother Nature? We’ve got you covered with a full rain cover designed to slip over your Big Sky Tank Bag.
Features
* Big Sky Tank bag sold separately
Possibly the ONLY water, dust, mud, and snowproof fender bag on the market today! Giant Loop’s adventure-proof version offers a roll top design and secure connection options for most dirt bike plastics that, when properly installed, stays on no matter what the adventure. Sized to fit a full-length set of tire irons and other relatively small, lightweight essentials, such as a spare inner tube, CO2 inflator, gloves, and other trail essentials.
“Extras” are a common factor before and during any adventure. “Extras” are defined as items that either lose their organized place or are simply acquired during a trip. The OBR ADV Gear Extras Pouch is the perfect solution for these miscellaneous items. The OBR ADV Gear Extras Pouch helps to keep these items within easy reach as standard storage that needs to be accessible during the day or as simple overflow.
Features
Quick day trips often necessitate the need for additional gear storage … the OBR ADV Gear Enduro Saddlebag answers this need with a creative downscaled design of the OBR ADV Gear Adventure Saddlebag. The OBR ADV Gear Enduro Saddlebag maintains the same fit and function keeping the load in close to the bike and forward for improved handling. OBR ADV Gears 10l Enduro Saddlebags are a great solution for packing extra tools, rain gear, or even overnight gear for those with minimalist needs.
Features
Everything you need to get you back out on the trail.
Genuine Yamaha parts to rebuild your shock linkage.
| Kit Contents: | |
|---|---|
| 5 | BUSHING YAMAHA |
| 2 | COLLAR YAMAHA |
| 1 | COLLAR YAMAHA |
| 8 | OIL SEAL YAMAHA |
| 1 | BEARING YAMAHA |
(Generic image, actual parts may vary)
Damping Rod style forks are notorious for being too harsh, too mushy and too easy to bottom. Gold Valve Cartridge Emulators remedy this problem by controlling the compression damping with a tuneable valve. The Emulator sits on top of the damping rod and is held in place by the main spring.
Simply put; Emulators make damping rod forks perform like well-tuned cartridge forks. Installation and tuning for any condition or rider preference is very straight-forward.
Simple to install and completely tunable for all conditions and rider preferences.
The complete fork upgrade kit - Progressive Suspension springs and Race Tech emulators. Also includes a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.
Cogent Dynamics fork caps not only look fantastic they also add the ability to precisely adjust the preload of your fork springs to best match your needs and compensate for different loads and conditions.
Spacer will need to be custom depending on specific application, rate and length. Generally speaking, start with more preload if progressive, less preload if straight rate.
The Moab Pro-Series shock from Cogent Dynamics is the standard by which all other shocks are judged in the KLR world. With its superior performance and exceptional reliability, Moab Pro-Series shocks have literally conquered the world many times over. The staff at Cogent is as passionate about motorcycles as you are.
Spring duties are handled by a custom spring available in either Standard or Heavy-Duty weights. The Standard spring will be fine if you are under 250 pounds and don't ride with luggage or passengers often. If you regularly carry luggage boxes and/or a passenger and weigh over 250 pounds, you will probably prefer the Heavy-Duty spring. Call if you have any questions.
Because of the limited space with the reservoir, adjusting your preload is just about impossible and for that reason we only sell these units with the Cogent Hydraulic Preload Adjuster already installed!
For a true comfort and performance package, we highly recommend upgrading your front suspension at the same time.
If you have '87-'07 KLR, you MUST order new mounting bolt. Not required for 2008-2018 models.
The Moab shock from Cogent Dynamics will change how you feel about your GEN 3 KLR650. You may like it now, maybe even like it a lot, but you will absolutely fall in love with it once you mount up a Moab shock.
Spring duties are handled by a custom spring available in either Standard or Heavy-Duty weights. The Standard spring will be fine if you are under 250 pounds and don't ride with luggage or passengers often. Ride heavily loaded or with a passenger regularly and you will probably want the Heavy-Duty spring.
There is very limited manual preload adjustment access on the Gen 3 KLR650 without removing the shock. Therefore, the addition of the Remote Preload adjuster gives you the convenience of optimizing your rear suspension spring preload for quick leveling (load compensation) of your bike to accommodate a passenger, luggage or just to change ride characteristics based on your preferences. The adjustment which would normally require reaching the shock in your bike to turn a threaded collar using a tool can be easily adjusted by twisting a remote knob which uses the convenience of hydraulics to change the spring preload up to 100% (9 mm total range of preload change).
There is a mounting conflict for the Remote Preload adjuster with the Happy Trails and T-REX crash bars.
The Cogent Dynamics kit is a simple and effective way to improve the damping for your Africa Twin forks. The AT-1 kit includes two new replacement fork base valves to completely revalve your forks in a straightforward pre-assembled kit. This kit is the adventure proven and suspension dynamometer tested kit for your CRF1000L front suspension. It uses new CNC aluminum damping pistons, valve stacks and check systems which come to you pre-assembled onto a base valve adjuster housing. This means you won't need a micrometer and valve shim experience to achieve the results you need. The Africa Twin 45mm upside-down fork uses sealed top cartridges.
This unique arrangement allows Africa Twin owners to do a simple disassembly of the fork, removing the cartridge and replacing the stock base valve assembly. Your stock valving assembly can be retained while the new AT-1 kit improves your suspension performance.
We suggest installation of stiffer fork springs along with the Revalve Kit.
NOT recommended for the Adventure Sport ES
Allows your bike to breathe much better giving you better response and performance.
Tired of paying too much for OEM paper filters? Drive in wet/rainy weather? Get an K&N filter for your ruckus! K&N filters are reusable, waterproof, and will save you money over the life of your scooter.
Replacement Air Cutoff valve from Yamaha
Kit Includes:
Extended float bowl screws from Wirth Machine for your TM40 that use 1/4" size wrench to loosen. Allowing easy access to your jets and float without having to remove the carburetor from the bike. Sold in a 4 pack. Stainless steel threads.
Extended float bowl screws from Wirth Machine for your OEM BST carburetor that use 5/6" or 8mm size wrench to loosen. Allowing easy access to your jets and float without having to remove the carburetor from the bike. Sold in a 2 pack. Stainless steel threads.
Replacement socket head (Allen) screws in case you strip out the stock JIS heads on your TM40 bowl. The originals can be stripped out when doing any tuning or carburetor maintenance. Sold in a pack of four, all for the bowl.
Replacement socket head (Allen) screws for the OEM BST40 Carburetor. The factory screws that hold the top cap and float bowl on the stock carburetor are very easily damaged. The originals are usually installed unbelievably tight from the factory. It is common to ruin the stock screws when installing a jet kit or doing any other carburetor maintenance. Sold in a pack of four. Two for the cap and two for the float bowl.
This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.
The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
Convenient tool to hold the clutch basket when servicing your clutch
The genuine factory shop service and repair manual. This is the reference manual Honda dealers use in their service departments. It has all the necessary info to do maintenance or repairs to your Africa Twin CRF1000L.
The genuine factory shop service and repair manual. This is the reference manual Honda dealers use in their service departments. It has all the necessary info to do maintenance or repairs to your Africa Twin CRF1100L.
OEM valve cover o-rings
Here are the O-Rings you need when you perform an oil change. These go inside the oil filter housing cover.
Replacing these O-Rings regularly will help keep your engine from seeping oil.
Complete set of engine gaskets and oil seals. Includes the addition of a factory Suzuki metal base gasket. A metal base gasket is essential because paper base gaskets will fail in the DR650.
Kit Includes:
Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
Raises compression from stock 9.5:1 to 10.5:1 for more power and snappier response. Highest quality Wiseco pistons are forged in the USA. Fits the standard size stock bore.
As with any engine or exhaust modification, you will need to re-tune your fuel delivery system for optimum performance.
Piston, Rings, Wrist Pin, Wrist Pin Bearings and Circlips included.
NOTE: A top end gasket set is required for installation.
4 custom made valves and 4 'Nickel Aluminum Bronze' valve seats. Valve sizes are 36mm intake (up from 32) & 32mm exhaust (up from 28). Requires professional installation.
We strongly recommend checking valve to piston clearance when installing oversized valves.
Protects vital engine parts and cases from rocks and debris. Clear anodized for corrosion protection and good looks. All mounting hardware included.
Made from 4mm thick aircraft aluminum .
Not for California models
B&B Eng. has created a true 'Bash Plate' for the mid-sized XT. Wings on the side of the plate deflect debris from the center and side cases. Manufactured from 4mm 5083 aluminum plate which is selected for its extreme suitability for welding, abrasion and impact resistance. Available in a polished finish or a complete covering with a black polymer coating. All necessary stainless clamps and is provided as well as foam or rubber when required.
Heavy-Duty Rear Master Cylinder Guard for any year model of the KLR. Wrap around design protects the precious master cylinder from damage.
Happy Trails exclusive Paris Dakar Nerf design for the ultimate in KLR650 protection. Loops of 5/8 inch tubular steel protect the expensive fuel tank and shrouds on your bike.
Included in this package is the fourth generation engine guard-highway peg combination giving the rider many more choices in riding positions for greater comfort mile after mile. The highway pegs provide bonus protection for the engine side cases, and they easily fold-up when not in use.
CNC machined from 2mm 5052 plate, these will protect your cases in the event of a bad spill. Mounted using a high-quality red silicone adhesive, which you can select as an Optional Add On so you can mount them up as soon as they arrive. Below is a link to Installation Instructions with photos to help you get them done properly.
The IMS Super Stock pegs are the perfect choice for both the daily commuter and the rider-in-training. Their mellow tooth design keeps you planted while preventing wear on your soles. They are also perfect for young riders who don't need or want a more aggressive option.
Wider foot pegs for sure-footed comfort.
17-4 cast stainless steel.
| Width | 1.97" |
| Length | 3.18" |
The IMS Super Stock pegs are the perfect choice for both the daily commuter and the rider-in-training. Their mellow tooth design keeps you planted while preventing wear on your soles. They are also perfect for young riders who don't need or want a more aggressive option.
Wider foot pegs for sure-footed comfort.
17-4 cast stainless steel.
| Width | 1.97" |
| Length | 3.18" |
Second image shows the Super Stock peg next to the stock bird perch.
For adjusting valve clearance on twin cam models. Holds valve spring collar down so adjusting pads can be removed. From Motion Pro, made from hardened alloy steel.
A handy pocket size slide calculator from Mikuni to help you calculate jetting changes due to temperature and elevation changes. Will work for single and multiple cylinder machines whether 2 or 4 stroke. Also includes a guide for determining rich or lean conditions.
No repacking required. The LeoVince X3 Enduro is made with TIG welded stainless steel internals and aluminum outer shell.
It features a semi-direct chamber design that is maintenance free. It's quiet too! Our own in-house testing showed an 84dB sound level using the USFS J1287 testing procedure. That is a bit louder than stock but significantly quieter than other aftermarket mufflers.
The installed weight is approximately 8.5lbs and it includes a certified Spark-Arrester.
This muffler requires a stock muffler joint gasket when used with either the stock headpipe or the FMF headpipe.
The EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
The T-6 Stainless Steel Exhaust System offers the same benefits as our popular Ti-6 Titanium Exhaust System, but the T-6 is constructed of stainless steel and aluminum for increased strength and durability while giving riders a more affordable alternative to titanium. The T-6 comes with a removable United States Forest Service (USFS) Approved Spark Arrestor making it easy to alternate between off-road and closed course riding.
Features:
If your taillight unit was damaged with your rear fender, we offer a brand new OEM unit.
Has both high and low beams. Attaches to the upper fork tubes with rubber straps. DOT and CE approved.
Moose Racing now makes a seat for you KLR riders. This is a complete seat already installed on a new high quality seat pan. Take off your old seat, and put on your new Moose Racing seat and get back to riding! The durable micro-fiber suede top cover enhances rider comfort and increases stability. Side gripper panels ensure secure seating during aggressive maneuvers. The cover is constructed from smooth marine-grade vinyl and features an embossed Moose Racing logo. It includes a strap kit that enables secure attachment of cargo to the pillion section of the seat.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
This might be the truest 50/50 Dual-Sport tire available today. The K180 is a street-legal DOT tire that performs great on the street and on the dirt. Inspired by American Flat Track racing, the Dunlop K180 has an amazing performance on gravel roads.
The K180 is P rated (max speed of 94 mph)
Don’t Ride without the Slide
BugSlide is a complete waterless detailer that cleans, shines and degreases while removing bugs and other surface contaminants with ease. BugSlide leaves a protective, microscopic finish that continuously repels dust, dirt, water and fingerprints. Never wax again! The release agent in BugSlide makes clean up quick and easy. BugSlide contains a UV filter for added protection and dries crystal clear with no yellowing, no build-up and no powdery residue.
Safe to use on all types of vehicles.
Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.
Combines wrench and bleeder valve into one convenient and compact tool
Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.
Zeta Revolver Shift Lever
B&B fired up the CNC equipment for another beauty, a Front Sprocket Case Saver. A great investment the 6mm aluminum base will protect your engine cases should your chain ever break or derail. On top of that is a 4mm piece to keep your pants and other things out of the chain as well. This replaces the stock cover over the countershaft sprocket.
If you have a 16t front sprocket, mounting modification may be needed to fit.
K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.
These kits fit multiple brands and models, please verify correct size for your model before purchase.
13mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10. In a shim box.
20 shims in total. From K&L.
KAWASAKI
Flats never occur next to a green grassy field with daisy’s … it always happens way out in the bush and in the dirt and weeds. Change your flat on a clean surface protecting your hubs and bearings from picking up unnecessary dirt and debris with the OBR ADV Gear Flat Mat. Our 24” x 24” Flat Mat provides you a clean area to set your wheel onto while also having convenient slip pockets to stash those easy to loose bits and parts that you removed during the flat repair.
Features
