Search Products

The Plugfones Guardian Plus is an upgrade from the Guardian with an expanded feature-set and functional changes. A step above the Basic series including enhanced audio, the option for replaceable plugs, extended 4-foot cord length, and a straight 3.5mm jack. The IsoTalk™ noise isolating mic dampens ambient noise in busy environments while enhancing vocal audio to make calls clear and concise.

Audio control is equipped with song ahead, song back, volume up, volume down, answer, hang up, and decline a call. Utilizing feedback from our customers, we have moved the control panel closer to the 3.5mm jack for easy access. The Guardian Plus speakers have been factory tuned for high quality audio and an enjoyable listening experience without losing any important frequencies.

Included with the Guardian are 2 different types of plugs (4 sets total included), the first is a comfortable silicone plug rated at a 27 NRR (noise reduction rating) and the second is our patented foam 3-tier plug that leads the industry with a 29 NRR (noise reduction rating). To protect your plugs, the Guardian series includes a hard case with a removable lid and transport them safely.

The Plugfones Guardian Plus is also offered in the VL configuration (Volume Limiting) which maxes the audio output volume no higher than 85 decibels to comply with OSHA environment safety standards.

This bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

This bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

This plate will protect the valuable center cases. All skid plates are supplied with the necessary stainless clamps and bolts where possible.

More info coming soon.

B&B Off Roads KLX230R bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

• Simple and quick to mount with plastic insert and two additional screws
• Flexible Heavy-Duty Polypropylene will not effect chassis ability to flex, will not effect handling
• New style developed after extensive research with factory race teams
• New vents keeps engine from overheating
• Offers maximum protection for chassis and engine
• Works great in sand and mud
• Weight 0.75 lb

Protect your frame/paint from scuffs and scratches with frame guards. The CRF150R frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.

The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike. Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.

Features:

• Protects the frame in the maximum friction area
• Use of rubber to increase grip and therefore control of the motorcycle
• Easy assembly and dismantling with expander and plastic bands

Available in 2 colors

Frame Guards protect the frame from wear helping to keep your frame looking new. Mounting hardware is included for quick and easy installation.

It may not surprise you that they are covered with HippoSkin™, their waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed cell foam insulation—both are designed to keep inclement weather away from your hands.

Sold in pairs.

Hand/brush guards are required for proper fitment and for safety reasons.

Hippo Hands go on and off in seconds and never require tools or hardware.

Our latest crf230f rack is designed for superior strength in mind for use in commercial and rural conditions. The main part of the rack in constructed from mild steel which connects to the subframe in 3 points and is designed to stiffen the assembly to carry a decent pay load. The top plate of the rack is 5mm aluminum with multiple tie down points and predrilled for rotopax/ fluid tanks which are available separate.

Luggage Plate:

• Total Width Approx 29cm
• Total Length Approx 33cm

Carry Rack:

• Total Width Approx 15cm
• Total Length Approx 20cm

Carry Rack and Luggage Plate Total Length Approx 54cm

• Made from 4mm 5083 Structural Plate
• Fully tig welded 
• Comes in polished or black PPA coating. 
• All hardware for mounting is included.
• Installation guide included

Note - Drilling of the rear guard is required for installation.

Rear fender carry all rack by Flatland Racing

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your Honda.

Comes complete with all hardware and easy install instructions. 

B&B Off Road's Honda Africa Twin Adventure Sport Big tour combo Luggage Rack has a two-piece main luggage plate with an added extension plate that mounts directly to the main rear rack and grab rails. Requires no modification for mounting.

Main luggage, adapter mounting plate and extension are all made from 5mm aluminum 5083 structural plate.

Very quick installation and can be done in a matter of minutes. The adapter plate is threaded for an easy install and removal of luggage plate which also includes mounting locations of our extension plate. Extension plate has some cnc machined billet clamps used for mounting.

Extension plates are great for those wanting to carry a larger load for a weekend trip or even to distribute some of the weight further forward

All the necessary bolts and brackets are supplied for mounting.

Rotopax and Givi Monokey holes are pre-drilled to suit the required mounts.

Total Width Maxi Plate Approx 45cm, Width of flat surface Maxi Plate approx 40cm

Total Length Approx 33cm

The Honda Maxi Luggage Rack and extension is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

DIMENSIONS

Maxi Plate:
Total Width Approx 45cm, Width of flat surface approx 40cm

Total Length Approx 33cm, Length of flat surface approx 33cm

Extension Plate :

Total Width: Extension Plate Approx 46cm

  Will not fit adventure sports model. Please see other listing.

Our ProCycle top rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

• 5/8" steel tubing
• Computer precision bending
• Durable powder coat finish
• CNC cut brackets
• Top rack dimensions 15" wide 11" long
• Top rack has RotoPax and hard case mounting tabs
• All mounting hardware included.

Top rack only, side racks sold separate.

The ProCycle side rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

Side racks only, top rack sold separate.

Compatible with the following top racks:

• ProCycle
• Pro Moto Billet
• Pat Walsh
• Nomadic
• TCI Borrego
• Stock Suzuki (must grind 1/8" off inside of frame mounts)

ProCycle rack installation requires removal of the stock grab bars. Turn signal brackets will be needed if using a top rack that doesn't offer turn signal mounting holes.

Construction

• 5/8" steel tubing
• Computer precision bending
• Durable powder coat finish
• CNC cut brackets
• All mounting hardware included

• Rear rack comes with grab bars, designed for specific models
• Flat surface with many fitting holes for cargo box and its box base installation
• Comes with loading hooks for secure luggage holding
• Can be used with GIVI universal box bases
• Maximum loading capacity is 5 kg / 11 LB

Whether it’s a quick over-nighter, a multi-day adventure, or commuting to your 9-5 … the OBR ADV Gear Explorer Saddlebag will get you to where you’re going while keeping your gear easily accessible, organized and protected from the elements. Removable roll down dry bags with ample amounts of capacity ride securely within a padded compression holster system making the OBR ADV Gear Explorer Saddlebag the bag of choice for the hardiest of commuters and adventurers.

Features

• Spacious total capacity at approx. 60L, 30L per side
• Heavy duty industrial textile construction with high strength UV resistant nylon webbing
• Weatherproof removable roll top dry bag system protects your gear from the elements
• Padded holster system with load managing compression straps
• Universal design with blank back plate intended to use each racks OEM mounting system
• Generous use of reflective webbing for increased low light visibility
• Versatile Molle Loops for added attachment and tie down points
• Load centralizing design keeps load mass in tight to the bike and forward for better handling both on road and off
• Quick and easy On/Off versatility with detachable dry bag system
• System includes 2 holsters and 2 roll top dry bags

Moose Racing has just released a new set of rackless saddlebags in their ADV1 line up. These saddlebags come with a base panel that allows you to mount the bags in multiple positions to accommodate different side panels designs. These are different than the traditional ADV1 dry roll-up style as there is a shielded zipper, but they are made of the same tarpaulin material, this makes them strongly water resistant and rugged.

• Saddle dimension: 30"L x 13"W
• Bag dimension: 19.3"L x 11"W x 6"H
• Volume: 36L (18L per bag)
• Universal mounting
• Multiple attachment angels for a custom fit
• Water resistant tarpaulin construction
• Molle attachment system for accessories and the addition of the ADV1 Center Rear Bag.
• Vibration absorbing protective pads under the saddle
• Abrasion resistant Hypalon panels for additional durability

This is a great tail bag for anyone looking for a mix of a saddle bag & tail bag. If you have a Cycle Racks rear top rack on a TW200, it lays nicely across giving you plenty of storage.

• 1200-denier Technolast water-resistant, UV-treated polyester construction
• Large main compartment and two smaller side pockets (52 Liters in total)
• Unique anchor knot attachment system features anti-slip cam buckles
• Anti-scratch base
• Rain cover with pocket
• Installs over the passenger seat and part of the tail section; fits bikes with a tail section width of 10.2" or less
• Measures 15" L x 27" W (front; 20" rear) x 16" H (from top of bag to bottom of overlapped sides); 7" H from top of bag to seat in front (5" in rear)

Special tool to remove the flywheel from the end of the crankshaft.

• Provides a simple and affordable solution to carburetor tuning problems
• Allows you to tune your bike for increased power and smoothness while retaining fuel economy
• Includes a guide booklet on how to install and use your jet kit to it's full potential

Perfect for Dirt Bikes with a stock engine using the stock airbox, air filter, and pipes.

Stage 1 Jet Kits are engineered to improve throttle response and deliver approximately 5% more horsepower than stock.

These kits are fully adjustable to allow the use of well-designed aftermarket pipes and stock replacement air filters, like K&N.

• Multi air filter intake increases airflow, improves filtering efficiency and raises the engine's output performance
• High-quality foam filter is easy to assemble and disassemble
• Suitable for long-term use with repetitive cleaning

Ditch the stock ugly plastic sub-fender and install a B&B Off Road Engineering License Plate Holder. Comes with an LED light to keep the license plate lit up.

Spare Extension Cable Set for Shorai 12V LFX battery charger.

ProCycle Dashboard designed to power multiple electronic devices. It can also be used for accessory lights, heated grips or gear, whatever you like.

The dash panel is manufactured from laser cut 5/64 mild steel and powder coated black. Also included are 2 weather resistant green LED rocker switches, a voltmeter with (two) 2.1 amp weather resistant USB ports, a wiring harness with a built in fuse/holder, and complete instructions. Everything you need to mount it and connect the bikes electrical system.

• Eliminates the 9800 rpm rev-limiter of the OEM ignition
• Direct replacement for the OEM CDI ignition box
• Hotter advance curve

Replacement muffler hanger strap for your SS1 muffler.

• Weight: 6.66 lb (-4.45 lb vs the OEM)
• AISI 304 stainless steel sleeve
• High temperature resistant packing (1,650 °F)
• Adjustable full carbon fastening strap
• Laser etched LeoVince logo
• Carbon fiber heat shield included in the package

The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

• Uses long-life muffler packing for increased packing life
• Forest Service approved spark arrester

The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.

• Hard anodized oval shaped aluminum muffler
• TIG welded reinforced muffler bracket(s)
• 304 stainless steel mid pipe
• Red powder coated stainless steel end tip
• Lighter than stock exhaust system
• Huge horsepower and torque gains
• Sleek muffler design allows for maximum clearance
• Removable screen-type spark arrestor included
• Handmade in the USA
• 1 Year Limited Manufacturer’s Warranty

This beautifully shaped exhaust perfectly matches the Monkey’s unique character. The twin conical mufflers are constructed from stainless steel and feature titanium sleeves. Offers power gains throughout the entire rpm range along with a reduced weight. The sporty but classic appearance can be further enhanced by adding the specially designed carbon fiber heat shield.

The Hi-Output Slip-on gives the bantamweight Monkey a heavyweight punch with a deep throaty growl and a beautiful stainless brushed finish.

• 3/4 System; Mid-pipes and muffler
• CNC Machined Billet end cap
• Laser engraved logo badge
• Laser-cut chassis cover
• 3 lbs lighter than stock

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.

• The ultimate power booster featuring exclusive Ti-Metal construction
• Improved bottom to mid-range power
• Produce the low end of a longer header and the top end of a short header
• Less susceptible to damage than a long header
• Runs well with sound-restricting mufflers; effectively reduce sound output by as much as 1.5 dB
• Substantial power increases everywhere
• Constructed of extremely lightweight materials

The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.

• Precision-bent TIG welded 304 stainless steel head pipes & collector pipe
• Larger diameter than stock head pipe
• Lighter than stock head pipe
• Increased horsepower and torque gains
• Handmade in the USA
• 1 Year Limited Manufacturer’s Warranty

• Offers an upgrade to a full system when used with the Akrapovic slip-on exhaust system
• Let your bike stand out with more power, a beautiful design, and the unique Akrapovic sound

The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.

• Hard anodized oval shaped aluminum muffler
• TIG welded reinforced muffler bracket(s)
• 304 stainless steel mid pipe
• Red powder coated stainless steel end tip
• Lighter than stock exhaust system
• Huge horsepower and torque gains
• Sleek muffler design allows for maximum clearance
• Removable screen-type spark arrestor included
• Handmade in the USA
• 1 Year Limited Manufacturer’s Warranty

Hard anodized oval shaped aluminum muffler with a TIG welded reinforced muffler bracket and red powder coated stainless steel end tip. Sleek muffler design gives you lots of clearance and it has a removable screen-type USFS approved spark arrestor. Head and mid-pipe are constructed from 304 stainless steel. Entire unit is pounds lighter than stock and gives great horsepower and torque gains throughout the RPM range.

All handmade in the USA with a 1 Year Limited Manufacturers Warranty.

Replacement Carbon Fiber Heat Shield for the Honda Monkey made by Akrapovic for their Muffler

Custom made push/pull cable set for the Honda XR650L.

These are for use with the stock throttle assembly, when mounting a Mikuni push/pull pumper carb, or Keihin FCR series carburetor.

Available as +3" and +6" over stock length, with stock style throttle side fittings.

Sold in a set as shown.

Here's a set of Shorty brake and clutch levers for your 2001 and newer Tdub.

• Black Alloy levers allow two-finger control of the brake and clutch
• Set includes brake and clutch short power levers

These new heated devices are for the user that does not want to commit to changing their grips but still wants to maintain the comfort of heated grips. The fitment is intended to fit all sorts of handlebar sizes. They can be installed and removed in a matter of seconds and kept in any sport bag when not in use.

Features:

• Universal fit to be clipped on any handlebar sizes
• Rubber material that is resistant to outdoor conditions and high temperatures
• Thin and flexible silicone wires make them easy to install

This Diode Kit is only necessary if you have a single dash indicator for your turn signals. One dash light for both left and right signals (such as on the DR650).

This kit allows power to flow in just one direction from the LED signals to the dash indicator light regardless of which direction you are signalling.

The 250 taillight & brake light fits perfectly into the pocket from the stock DR650 taillight on the rear fender. Smaller and much better looking than the original.

Totally 'plug-n-play', includes a standard bulb installed or purchase an LED replacement, sold separate, for even brighter braking. The wire pigtail plugs directly into the DR650 harness just like stock.

  Does not fit with the ProCycle Fender

Modern LED technology with a classic look!

This plug & play kit is built around the all new Holley RetroBright LED headlight which comes in three different colors.  

Choose from Classic White (3,000K), Modern White (5,700K), and Euro Yellow. The RetroBright also features a replaceable bulb.
 

Low Beam: 25W, 2,000 Lumens
High Beam: 30W, 3,000 Lumens
Color Temperature: 3,000k or 5,700k
DOT Compliant
Beam Pattern: Left Hand Drive (USA)

Does not fit '87 TW200 because that year has a unique AC powered headlight circuit.

This kit includes 2 auxiliary light mount brackets. These brackets are designed to mount to most lower triple clamps. New longer bolts are supplied to accommodate the thickness of the bracket. These brackets are powder coated black for a sleek and long lasting finish. The brackets can be used to put the addition of new lights to the outside of your forks or swap the brackets and the lights can be mounted inward to give more clearance for bigger shrouds or fuel tanks.

The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. This mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

This is for Mount Only. Sold individually.

10 Watt LED lights sold separately.

These turn signal relocation brackets from Yoshimura provide an easy way to move the stock turn signal lights or install aftermarket turn signals.

Combines with the Yoshimura fender elimination kit

Included in this kit are fork springs, Cogent DDC (Drop in Damper Cartridge) performance cartridges and one bottle of 5w fork oil. Refresh those tired old forks and make them better than new. These DDCs from Cogent are easy to install. No taking the forks apart, no drilling of the damping rods, nothing. Just take them off, flip them over to drain the oil, add new 5w oil, drop in the DDCs and then add the springs.
This upgrade offers better control off-road as well as on. Less brake dive keeps the fork up in the middle of the stroke on-road and better control off-road whether it be rolling water bars or bouncing off the rocks.

Stock Spring Rate is .50 kg/mm. The .60 kg/mm springs are 20% stiffer than stock while the .70 kg/mm is 40% stiffer than stock.

DDC Tool will not work with this spring series

Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction

Custom Elastomer Fork Seals have been tested to outlast OEM fork seals. Extends typical seal life by 3 to 5 times over OEM seals

Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action

Lower Stiction, Longer Life! It doesn’t get any better than this!

Plus, the only complete line of dust wipers! Wipers should be replaced with the fork seals to assure peak performance. 

Kit includes Fork Seals and dust wipers.

 

Kit includes all the fork bushings, o-rings, snap rings and washers. This kit comes with what you need to completely rebuild your front fork bushings.

Kouba lowering link will lower the rear 1.75". Comes with bearings and seals installed for a quick and easy installation. Instructions included.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Kouba lowering link will lower the rear 1.75". Comes with bearings and seals installed for a quick and easy installation. Instructions included.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Kouba lowering link will lower the rear 0.75" - 2.25". Comes with bearings and seals installed for a quick and easy installation. Instructions included.

Comes with “H” linkage and aftermarket shock clevis for additional lowering. Each can be used together, or individually.

Note: We recommend all customers have a dealer install the shock clevis, as the stock clevis is difficult to remove.

Sold as a kit, lowering amounts shown below.

Kouba lowering link will lower the rear suspension. Comes with bearings and seals installed for a quick and easy installation.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Kouba lowering link will lower the rear 0.80”. When combined with stock lowered clevis, lowers the rear a total of 1.75”.

Comes with bearings and seals installed for a quick and easy installation. Instructions included.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Lowers the rear suspension 1.00". Precision machined from billet aluminum and anodized.

*Important when lowering the rear suspension you want to raise the fork tubes in the clamps an equal amount of inches that the rear is being lowered. That way your bike will sit level when done.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

We start with an Excel rim, OEM hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Upgrade to SUN rims available in 3 colors.

Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.

• New OEM hub with bearings and seals installed
• 2.50" x 19" Adventure (Sun rims are 2.75")
• 2.50" x 18" Street
• 3.50" x 17" Supermoto

Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.

We start with an Excel rim, OEM hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Upgrade to SUN rims available in 3 colors.

Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.

• New OEM hub with bearings and seals installed
• 3.50" x 17" Adventure
• 4.25" x 17" Supermoto

Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.

This kit of O.E. Suzuki O-rings replaces your leaky, weepy, and brittle O-rings that fit between your DR's oil cooler lines. You get 4 O-rings in this kit to replace both feed and return line O-rings.

If you're noticing oil leaking or creeping around your oil cooler, oil cooler lines, or engine, you may have one or more failed / failing oil cooler line O-rings. Replace them now before they completely fail and you run your motor dry of the precious oil it needs to operate properly.

In this kit you will get 4 factory replacement bolts to replace any broken or damaged clutch pressure plate bolts on your DR650.

It can be easy to over torque these bolts if not done properly. If one of these bolts is damaged on your DR650, we highly recommend replacing all 4 to prevent any future failures down the trail.

This kit includes one OEM drive plate retaining wire & one OEM inner steel drive plate.

If you've ever changed the clutch on a DR650 you will be familiar with the extra steel plate at the bottom of the stack that is locked in place by a very thin metal wire.

Generally, when you do a clutch replacement on the DR650, you do not need to remove or replace these items. If you do need to (or if you have already) you will come to realize this wire is not very strong and is prone to breaking if not treated with care during the removal / installation process.

• Our own #190 cam profile offers more lift to give better low-end and mid-range punch and more duration to keep the motor pulling hard in the upper RPMs.
• Our performance cams are reground from OEM camshafts - no core charge or return required.
• We recommend a high compression or big bore piston to get the most out of your performance camshaft.

  We strongly recommend checking valve to piston clearance when installing a non-standard camshaft.

What would you do if your oil cooler was damaged way out in the bush? We have a simple solution. This kit allows you to bypass the oil cooler and both oil lines and insure that the top end continues to get the oil it needs to stay healthy. Simply remove the stock oil lines from the motor and attach one end of the bypass at the head and the other end at the engine side case. Be sure to leave the original o-rings in place.

Small, light weight and easy to carry. You may never need it but if you do it will save you a lot of walking!

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Features:

• Wider, lighter, stronger design
• Widest (mm) and lightest pivoting pegs on the market
• Upgraded heavy duty, long life springs
• Unique multi-directional grip pattern
• Outstanding build quality
• Lifetime Warranty*
• Made in USA
• Expanded motorcycle fitment range
• Overhaul kit includes: 2 pivot bushings, 2 pivot tension springs, 2 lock nuts, 2 washers, 6 o-rings, 2 split pins and instructions

Replace these any time you feel excessive play in the sprocket hub.

Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier.

Sold as a full set.

Replacement retainer if yours is worn out or lost.  
This retainer is has a no hassle installation for quick change sprocket swaps with simple readily available tools (pliers and screw driver).

This spring clip retainer takes the place of the OEM two bolt retainer and fasteners when a FRITZCO sprocket is used.

All sizes of new FRITZCO sprockets come with a quick change retainer included, this is only a replacement.

This retainer can only be used with FRITZCO sprockets and can not be used with thin OEM type sprockets.

FRITZCO front sprockets are a straight up no hassle installation. Their sprockets are machined from alloy steel that in every way is comparable to OEM Yamaha and the best offered by other manufactures. The sprockets are then given a heat treatment that provides a compatible sprocket for the Yamaha output shaft and longest chain wear life possible.

JT Sprockets is the world's leading manufacturer of aftermarket sprockets, constantly raising the industry's standards for quality and service. JT Sprockets are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.

• Super economical roller chain
• Standard chains have two-point pin riveting
• Special steel alloy, solid roller and pre-stretched, shot-peened parts
• Comes with clip-type master link

Our very own high flowing head-pipe is made in the USA using a CNC (computer numerically controlled) mandrel bender for an absolute perfect fit. It is a high quality 3-piece welded two into one, stainless steel head-pipe.

• Primary tubes: 1-1/4" diameter
• Collector tube: 1-3/4" diameter
• Secondary tube: 1-5/8" diameter

The SS Pro-Flow is a tested upgrade over stock that will bolt right on with no modifications needed. 

We recommend a new exhaust gasket when installing your new SS Pro-Flow.

Factory Honda replacement for your worn out lower cable guide.

• Each kit contains all necessary components to rebuild a master cylinder
• Made by Nissin, an OEM supplier in Japan

Moto Max Kit With R1 Digital Radio - Helmet Kit, Harness, and Handlebar Push-To-Talk

Designed for racers, by racers. The MOTO-MAX is manufactured to strict standards and made to take you to the podium.

With heavy electrical shielding, genuine Nexus Military-grade connectors and a handlebar-mounted Push-To-Talk button, this race kit offers no-compromise communications and full operation without ever having to take your hands off the bars or the finish.

MOTO-MAX is the go-to for racers and hardcore riders

Compatibility:

This radio works with all VHF/UHF business band radios operating on the same frequencies, as well as digital radios using the DMR platform. Radio models include, but are not limited to: R1, RDM-DB, M1, RDH-X, V3, RM60, RH5R, RDH16, as well as Icom, Motorola, Kenwood business band radios, and more.

Business License is required. Click here to learn more.

Walkie-talkie compatibility keeps you connected to friends and family on the trails! The MOTO-MAX kit is manufactured to strict standards and made to take on extreme offroad environments.

With heavy electrical shielding, genuine Nexus Military-grade connectors and a handlebar-mounted Push-To-Talk button, this race kit offers no-compromise communications and full operation without ever having to take your hands off the bars or the trail.

MOTO-MAX is the go-to communication solution for hardcore riders.

Compatibility:

Works with all GMRS/FRS radios operating on the same frequencies, including but not limited to GMR45, GMR25, GMR2, and more.

Business License is required. Click here to learn more.

Designed for racers, by racers. The MOTO-MAX is manufactured to strict standards and made to take you to the podium!

With heavy electrical shielding, genuine Nexus Military-grade connectors and a handlebar-mounted Push-To-Talk button, this race kit offers no-compromise communications and full operation without ever having to take your hands off the bars or the finish.

MOTO-MAX is the go-to for racers and hardcore riders

Compatibility:

This radio works with all VHF/UHF business band radios operating on the same frequencies. Radio models include, but are not limited to: R1, RDM-DB, M1, RDH-X, V3, RM60, RH5R, RDH16, as well as Icom, Motorola, Kenwood business band radios, and more.

Business License is required. Click here to learn more.

Ballistic nylon padded construction absorbs vibration and shock protecting your radio from abuse. The updated design is longer now, to accommodate our radios with extended batteries. Each bag also comes with a foam block to properly position radios without extended batteries. Zipper top closure keeps the radio secure.

• Ballistic nylon construction
• Shock-absorbing padding
• Includes foam block to adjust for different radio heights
• Quick Velcro mounting

The Rugged Radios bag is built to perform in tough environments.

Fits: R1, RDH-X, V3, RH5R

Does not include handheld radio.

Adventure on the Weekend with the Rugged Connect BT2 Moto Kit!

The Rugged Connect BT2 uses the latest Bluetooth technology that quickly and easily connects to your phone for incredible music streaming, convenient GPS navigation, and seamless phone call conversations. This kit pairs the Rugged Connect BT2 with our SUPER SPORT Moto Kit allowing you to talk for miles at the push of a button.

No pairing. No cell service. No mesh network - no problem!

Connectivity For Miles
Using our powerful, compact, walkie-talkie compatible handheld radios, you can connect an unlimited number of riders and reliably communicate 1-3 miles or more - well beyond the range of any current Bluetooth models available!

Simply Turn On & Talk To Others
Simply put your radios on the same channel and start talking. No pairing is necessary, no mesh network is used, and even if the Bluetooth headset runs out of battery our proprietary design allows you to continue to talk through your handheld radio. Spend less time getting setup and more time riding!

This kit includes a GMR2, GMRS handheld radio, which has an optimized transmitter with tuned antenna providing long range performance

Compatibility: Works with all GMRS and FRS radios operating on the same channels, including Rugged GMR45, GMR25, and GMR2. Also works with all GMRS radios from other manufacturers including Motorola, Midland, Uniden, and many more.

• Integrated shutoff valve allows precise amount of liquid to be dispensed
• Graduation marks for cubic centimeters, fluid ounces and premix ratio
• 1000 cc (34 oz) capacity
• Easy to understand premix ratio graduations for 32:1, 40:1, 50:1, and 60:1 for 1 to 3 gallons
• Adjustable ball-pivot spout allows easy, spill-free filling
• Top cover keeps dust and dirt out when not in use
• Magnet allows funnel to be stored conveniently on the side of your tool box
• Large molded handle for secure grip
• Reduced neck keeps funnel from dripping residue when funnel is laid on its side

7" wire twisting pliers with return spring mechanism for easy and safe wire twisting.

Features:

• Versatile, light and super compact chain tool for adventure touring and long distance trail riding
• 6061 billet aluminum body, complete tool weighs only 230 grams (8 oz)
• Will break 520, 525, and most 530 chains and master links (maximum link width of 20 mm)
• Included steel press plate for removing and installing clip style press-on master link plates
• Innovative dovetail closure provides ease of use and superior strength
• Hardened steel thread insert on body provides strength and durability
• Includes durable cloth pouch for easy transport on your adventure
• Requires use of a 12 mm and 14 mm wrenches (not included)
• Does not rivet master links.
• We recommend using the Motion Pro PBR Chain Tool if you have a rivet style master link

Refresh your front or rear tire instead of throwing them out! Tread Doctor Lightweight heated tool lets you quickly cut new edges into your dull worn out knobby tires.

Our portable 12v compressor is perfect for any tool kit. This unit weighs only 14 oz and measures just 4"x2"x6".

Features a built in LED light and 0-120 psi gauge

• Comes with everything shown

Here is a set of 'trail size' tire irons. At 8-1/2 inches long they are small enough to fit in a fender bag with your spare tube.

Protect your wheels from scratches and dings caused by tire changing tools.

• Includes retrieval cord for easy use
• Sold in pairs

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with POLYETHYLENE CROSSLINK for extra strength and durability.

• 2.5 gallon capacity

Does not fit Rally model

Keep your head warm while you're not wearing your helmet on those colder days. Our premium waffle knit beanie is available in black or olive green.

Comes complete with our custom ProCycle embroidered patch.