Search Products

• Kits contain all parts needed to re-seal leaking master cylinders
• Includes cup seals, copper washers, o-rings and spring, and clips where applicable

• Organic brake pads contain man-made high-performance fibers that are used for their light weight, high strength abrasion resistance and thermal stability. These Aramid fibers have a high strength-to-weight, thermal stability and abrasion resistance to provide advantages over steel fiber-based products. They provide excellent stopping power without noise and rotor galling but still provide fingertip control and strong, predictable brake response.
• Double-H sintered metal brake pads feature the HH friction rating, the highest in the industry. These pads provide maximum brake effect and last twice as long as organic pads.
• Semi-sintered pads have an all new recipe containing 30% copper by weight with an organic matrix. This design combines the long life of a sintered pad with the great feel and lack of rotor damage common with full-sintered pads. These can be used to replace Kevlar or sintered metal compound pads.

These DP Standard brake pads are our OEM replacement sintered metal compound. Ideal for everyday use, both on and off-road. They provide excellent all-round braking hot or cold, wet or dry. Where applicable a high-tech ceramic heat shield is applied to the rear of each backplate to reduce the heat transfer into the fluid and prevent brake fade. They have one of the lowest wear rates on the market, very low levels of brake dust and no noise and no thermal cycle bedding-in required are also benefits of the DP Standard brake pads.

Double-H sintered metal brake pads feature the HH friction rating, the highest in the industry. These pads provide maximum brake effect and last twice as long as organic pads.

Set includes pads for both front calipers.

Corbin has replaced the stock two-piece seat with a single seat model to provide more structural support. Corbin has created two models, one to maintain the stock seat height, and one to provide an easier ground reach like the stock seat in a lower position. By designing each seat specifically, they were able to keep excellent ergonomics. Corbin's saddles are designed to work with the optional Honda saddlebags. Mounts to the motorcycle similar to stock and secures with the Honda key lock system. All brackets are included and pre-mounted on the seat so it's ready for immediate installation.

Passenger seating area is designed with a neutralized platform to resist sliding forward in the saddle. Dished shaping provides an excellent contact patch and maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest as shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike. Please note, the Corbin backrests may not work in the saddle if you are using the Honda trunk.

Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.

The design shown includes Black Grabber seating with Asphalt vinyl contrasting sides and nose with a tasteful color coordinated welt. Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.

• Light enduro footpeg with enhanced grip
• Mounted with popular RGK2 peg joints
• Tread on footpegs offer a secure hold even with heavy boots
• Includes two footpegs and two bike specific turning joints
• Notches dynamically adapt to the weight shift by being able to move forwards or backwards with an intelligent dampening system
• Unique serrated structure ensures reliable slip protection and allows unrestricted concentration on the road
• Innovative rubber bearing between the tread and the joint means basic vibrations are absorbed and shocks on uneven terrain are mitigated
• Dynamic adaptation to foot movements
• Enhanced safety and riding enjoyment

Like most machines, the OEM pegs on the Africa Twin are for the birds. They are small and provide a minimalist platform to control the motorcycle and they are uncomfortable if you stand on them for very long. You can install new, larger pegs or you can bolt on these beautiful aluminum extenders on top of the stock units. You can see the stock peg inside the topper in the upper image.

If you stand for very long these pegs will pay for themselves quickly. CNC machined with slightly rounded edges on the teeth so they won't eat up the soles of your boots, then anodized black, these are pretty and functional. 2.32" x 3.38" is nearly double the contact area of the stock pegs. Mounting hardware and detailed instructions are included, making installation a snap.

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

• Mega wide 60mm platform
• Widest and lightest pivoting pegs on the market
• Open design = less mud packing
• Unique multi-directional grip pattern
• Outstanding build quality
• Race proven design and durability

• Designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings (where ball-type bearings are used by the OEM)
• Designed as a replacement taper bearing seat (where taper bearings are original equipment)
• Kits come complete with both upper and lower taper bearing cups and cones and seals (both top and bottom seals are included in most kits)
• Tapered roller bearings decrease maintenance along with less wear and longer life

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Complete kit to replace the bearings and seals in your shock linkage. Includes the lower shock bearing.

Link lowers the rear of the bike by 7/8".

Comfortable at a stop or on technical trails.

Installation takes about one hour, and only a few minutes more to drop the forks in the front to match.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

• Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
• Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
• Triple-lip seal design
• Dyno-tested to last 3 to 4 times longer than OEM seals
• Directional ribs allow seal to be installed easily
• Kit includes fork seals and dust wipers
  
   

Save time and money with this complete OEM quality fork bushing kit.

• Kits include fork leg and slider bushings along with any needed snap rings, o-rings and copper washers

The progressive factory springs are well known to be way to soft for most riders. Cogent Dynamics straight rate springs will give better control in the rough stuff and when loaded up.

Sold in pairs.

0.72kg/mm riders up to 260lbs

0.80kg/mm riders 260lbs and up

The 0.72 springs are 28% stiffer than stock and will be a great choice for most riders

Not compatible with Adventure Sport ES

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. Get a fresh one now to ease installation of your new performance muffler.

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust. 

Kit includes two gaskets.

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

12mm Thread, 17mm Head.

Includes 2 drain plugs

• The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963.
• Constructed using the best materials available.
• With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world.
• TUV approved and production monitored to ensure OEM or better quality.
• Sold as a package of 5 oil filters.

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

• The ultimate in the evolution of spark plug technology and performance from an industry leader
• The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
• Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
• Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

A 10-pack of drain plug sealing crush washers. Soft tempered aluminum drain plug crush washers designed to seal in fluids

Replace your sealing washer at every oil change to prevent a leak.

Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

Includes 2 drain plugs

Here's an easy way to add a Tach to your motorcycle. 

• Tachometer from 0-19,999 rpm
• Non-resettable hour meter from 0-99,999 hours
• Easily mount it to any surface using either the bolt-on (screws not included) or peel-n-stick mounting options
• "Wrench Icon" with hours
• The smallest available meter at 50 x 25 x 14mm and has large, easy to read digits

Zeta Revolver Shift Lever

• Rotating shift tip provides 6 different positions, offer more sensitive shift position adjustment.
• Shift arm is made of A2014 forged aluminum for durability.
• Forged arm is black anodized finish with laser print logo.
• Foldable shift tip is made of CNC aluminum with knurled finish for better shift grip.
• Shift tip is color anodized with ZETA laser print logo.
• Replacement shift tips and tip mounts are available.

These quality JT sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

These quality sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

High Quality chain. Will need to be cut to fit your sprocket combination.

Replace these any time you feel excessive play in the sprocket hub.

Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier.

Sold as a full set.