Search Products

High Quality chain. Will need to be cut to fit your sprocket combination.

High Quality chain. Will need to be cut to fit your sprocket combination.

The Acerbis 2.0 Chain Guide Block easily replaces the entire OEM unit and ensures durability and high resistance to shock and wear from the chain.

Made of PA6, it is made of two parts that allow installation without removing the chain.
100% PA6 construction Weight: 200 grams

• Computer-designed to achieve ultimate strength at minimum weight
• JT combines leading-edge technology with top materials to produce the ultimate quality sprocket range with unbeatable value
• Every sprocket meets or exceeds the highest possible quality standards set for the motorcycle industry
• Sprockets are heat-treated and bead-blasted to reduce material surface tension
• Front sprockets are made with C45 steel and SCM415 chromoly steel alloy.
• Quality, design and OEM proven technology are the same as used for what is supplied to the motorcycle manufacturers

Quality Steel Rear Sprocket

• Computer-designed to achieve ultimate strength at minimum weight
• JT combines leading-edge technology with top materials to produce the ultimate quality sprocket range with unbeatable value
• Every sprocket meets or exceeds the highest possible quality standards set for the motorcycle industry
• Sprockets are heat-treated and bead-blasted to reduce material surface tension
• Unless noted, rear sprockets made with top-quality-grade C45 high-carbon steel

Here's an easy way to add a Tach to your motorcycle. 

• Tachometer from 0-19,999 rpm
• Non-resettable hour meter from 0-99,999 hours
• Easily mount it to any surface using either the bolt-on (screws not included) or peel-n-stick mounting options
• "Wrench Icon" with hours
• The smallest available meter at 50 x 25 x 14mm and has large, easy to read digits

Antigravity Batteries introduce the ground-breaking "RE-START (RS)" line of batteries. These are the first batteries with built-in jump starting! They intelligently monitor their status, and just before going completely dead, puts itself to sleep with just enough energy to get your vehicle started again. Simply press the RE-START button located on the battery, then start your bike and ride away!

These are an extremely lightweight (2.3 lbs.) and high-powered Lithium-Ion replacement battery for motorcycles. These batteries offer the first Battery Management System (BMS) found on a powersport battery and includes low-voltage cut-off, over discharge, over-charge, and thermal protections with real time lithium-ion cell balancing. Highly recommend using a lithium charger to maintain the life of the battery.

3 Year warranty

Product Size is just 5.9"L x 3.5"W x 3.74"H. If you need spacers, select the optional Foam Kit to pad the battery in the battery box.

Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals, it is non-explosive and non-combustible.

The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.

Rated at 250 CCA (Cold Cranking Amps)
Package Dimensions: 6.20 x 3.70 x 4.80

• Durable steel wide foot pegs.
• Made of chromium molybdenum steel for extreme durability.
• Black powder coating finish

The IMS Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. 

They are the original Cast 17-4 Stainless steel pegs that revolutionized the foot peg market.

These pegs are 50mm(1.95") x 78mm(3.1"). 

Pegs Sit at Standard/OEM Height

Low peg mounts from JNS Engineering. You can use your stock pegs or aftermarket pegs with these T7 mounts.

These offer a 24mm drop & 24mm rearward offset.

Note: Not compatible with any center stand.

This is the ultimate adventure bike platform, it measures 2.25" wide, 4.75" long.

Patented adjustable collars make it easy to run them in the stock or lowered positions on most bikes.

Gain more room for bulky boots, or for longer legs. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. Kamber bolts lets you adjust the 'tilt' of your pegs to increase comfort, or to give better squeeze on your bike.

Kit includes required fit kit.

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty. Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!

• Wider, lighter, stronger design
• Widest (mm) and lightest pivoting pegs on the market
• Upgraded heavy duty, long life springs
• Unique multi-directional grip pattern
• Outstanding build quality
• Expanded motorcycle fitment range
• Overhaul kit includes: 2 pivot bushings, 2 pivot tension springs, 2 lock nuts, 2 washers, 6 o-rings, 2 split pins and instructions

• Tech-X footpegs provide outstanding performance and control by minimizing vibrations and adapting perfectly to the rider's foot movements
• Innovative rubber bearing between the tread surface and the joint
• Basic vibrations are absorbed and shocks on uneven terrain are mitigated
• Notches dynamically adapt to the corresponding weight shift, by being able to move forwards or backwards - accompanied by an intelligent damping system
• Increased safety and driving experience
• Unique serrated structure ensures reliable slip protection and allows unrestricted concentration on the road
• Parts are pre-assembled, making assembly easy
• Includes specific catch joint

Tapered roller bearings provide decreased maintenance, less wear, smoother operation and longer life.

This set of high quality replacement steering stem bearings includes:

• Upper and lower tapered bearings
• Upper and lower bearing races
• Upper and lower seals

The SW-MOTECH center stand for your Yamaha Tenere 700 increases the versatility of your machine for more secure parking on various terrain while enhancing ease of maintenance. Robust steel construction provides sturdy support for the motorcycle and is powder coated black for enhanced durability and corrosion resistance. This high quality center stand is designed and engineered in Germany for seamless integration with the factory original components and easy operation utilizing a built in foot lever which increases leverage and decreases lifting effort.

Features:

• Robust steel construction
• Attractive powder coated black finish adds corrosion resistance & durability
• Improves parking stability and versatility on various surfaces
• Significantly reduces the risk of a tip over when used on softer terrain vs side stand
• Integrates perfectly with the factory original components
• Easy to use German design uses leverage to make lifting a cinch
• Foot lever increases leverage to aid in lifting technique
• Does not require cutting, drilling or any other permanent modifications
• Allows on the road maintenance without a paddock stand
• Eases chain and tire maintenance
• Double retention spring ensures safe operation even if one spring fails

Here is an adjustable height centerstand from T-Rex Racing. If you are running supermoto wheels or lowering links, this centerstand will be much easier to use.

T-Rex stands are made from steel tubing finished in black powder coating for durability. Back by a 3-Year limited warranty for any material or manufacturing defects. Rest assured that you are getting best material commercially available.

Greatly eases basic chain maintenance, tire changes, parking, cleaning, etc. All necessary hardware is included. Installs using basic hand tools.

A must have for lowered bikes.

• Special Feature: Bigger kickstand shoe. Extends approx. 0.5" longer than stock and shortens up to 2.5"
• Material: Steel tubing with black powder coated finish for strength and durability

Small scuff on sticker, shown in picture. Sold As Is.

Designed to make your compact rack even more versatile for riders who need a larger luggage platform. 

• Comes in polished.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• Weighs 1kg
• Multiple attachments points 
• Pre drilled for Givi monokey mount system
• Pre drilled for roto pax fluid containers
• This listing is for the Rear luggage plate only
• Dimensions 25cm x 26cm flat surface 
• Does not include Pillion handles or base tail rack. Please see other listings for these items

Minor install marks, does not affect quality or performance.  Sold as is, in original packaging includes hardware.

The SW-MOTECH Rear Brake Master Cylinder Guard is designed to fit the Yamaha Tenere 700. This guard protects the rear master cylinder from impact and prevents the foot from contact. A laser-cut and precision bent aluminum strengthening process makes the construction tough and durable and capable of withstanding heavier blows.

Features:

• Prevents contact between boot and foot brake cylinder and provides additional protection
• Lasered and bended from high-strenght aluminum.
• Brushed silver finish
• Easy Installation

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

• A set of MadStad adjustable brackets
• 3/16" (4.5 mm) thick cast acrylic windshield.

Installation is super simple. Our bracket system attaches where the stock shield normally goes and our shield then attaches to the brackets. With the shield separated from the front of the bike you can pull lots of air underneath it which is critical for smooth comfortable wind protection. You still have a fairly compact shield but now the wind pressure on your head and face are gone, and you are still looking comfortably over the shield.

Replace your motorcycle’s windscreen with PUIG’s touring windscreen. Manufactured in acrylic of 3-4 mm according to the motorcycle model to guarantee maximum protection from the wind, improving the aerodynamics of the piece and possible debris that may impact you during your ride.

In addition, it comes with a variable visor that will redirect the wind even more while achieving a great sense of comfort on board your machine. This visor is fixed to the touring windscreen by screws, since the screen comes with the holes already made to facilitate assembly.

The windshield has a rounded contour of> = 2mm, complying with the TÜV regulations.

This part is only available in smoked finish.

For assembly, PUIG provides instructions with mounting tips, so you can quickly enjoy the touring windscreen on your motorcycle.

When usefulness and quality matter the Cyclops Auxiliary light kit for the Yamaha T7 comes shining through and leaves the competition in its wake.

The usefulness of having lights that turn direction with the bars can be very beneficial, perfect for those evenings that might have gone a little long and you need to set up camp or pick your way through a tighter section of trail.

Usefulness from having the ability to run daytime running lights and have full control of low beam settings as well as a switch to disable the system leaving only DRLs on. (Dimmer with cutout switch)

Simplicity for those that don't want to add ANY switches to their bikes, you can choose to have the aux lights activated in a reduced power on low beam (50%) and high beam (100%) via the factory high beam switch by choosing the dimmer option with no switch. We don't like extra switches on our already cluttered bars, Do YOU?

Or have the lights on in high beam and off in low beam, with no switches. Option (I do not want dimming or any switch, Aux lights turn on with factory high beam switch)

If choosing the DRL version, DRLs will be on with the key. By choosing a switch you can disable the main auxiliary lights leaving only the DRL ring on during the daylight. Then at night, flip the switch and have full control of your main auxiliary lights activating in conjunction with your bikes high and low beam, this works very well with the ON with high beam OFF in low beam, No switch option.

With this Cyclops kit you can choose what works best for you. 

Benefits of a 100% plug and play setup utilizing all factory Yamaha connectors. If using diming, The high beam wire does use a positap, By far the best way to tap into a wire without causing damage, no tools required.

The basic kit uses our tried-and-true Aurora 2-inch diameter, 19 watt (38 for the set) light kit, All CNC machined, polycarbonate lenses and super lightweight. Each light is rated at 2000 lumens (4000 for the set) with a 15-degree optic throwing a light beam nearly 500 ft

You can choose the DRL or non DRL version.

If no dimmer option is chosen the kit will come with a switch to turn the lights on or off, If you chose the dimmer option you can install the lights with No switch, The auxiliary lights will work in conjunction with the factory headlight, Low beam is set at 50%

With the DRL option, you can also choose the cutout switch, this will disable the system, this works well with the DRL, allowing you the ability to turn the main aux lights off and run with only the DRL halo rings.

They offer mounts for the stock low fender or the Camel ADV high fender kit.

 Emark certified for your confidence when riding in countries that require this certification.

Look at these quality features!

• Solid Steel cradle mount. No broken or cracked mounts!
• CNC machined aluminum housings.
• Poly-carbonate lenses, Break-proof!
• 15-degree beam patterns, a great choice for distance and field of view.
• 19 watts each
• 2000 lumens a piece, 4000 lumens for the set.
• 5500K
• Input voltage 9-30VDC
• R113, R10 TUV and Emark certified.
• IP68 Rated
• Warranty....5-year Function warranty (crash damage excluded)

Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.

White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.

Dazzling bright Amber blinker functions. 

All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.

Yamaha T7 Specific plug and play kit using factory connectors, flasher and block off plates included.

The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike. Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.

Features:

• Protects the frame in the maximum friction area
• Use of rubber to increase grip and therefore control of the motorcycle
• Easy assembly and dismantling with expander and plastic bands

• Provides flat surface on both sides of the frame for better bike holdings.
• Made of 2mm thickness 5000 grade aluminum for durability.
• Hairline processing surface finish.
• Comes in a pair, bolt on design, and no modification required for installation.

• Extremely strong plastic construction
• Protects the swingarm of the motorcycle from impacts with external obstacles
• Easily attaches to the swingarm with magnets and rubber bands, which allows quick removal of the protections in few seconds to wash and/or maintain
• Intuitive and immediate reassembly in a few seconds

• Simple and quick to mount with plastic insert and two additional screws
• Flexible Heavy-Duty Polypropylene will not effect chassis ability to flex, will not effect handling
• New style developed after extensive research with factory race teams
• New vents keeps engine from overheating
• Offers maximum protection for chassis and engine
• Works great in sand and mud
• Weight 0.75 lb

• Made from high-density polyethylene construction
• 8 mm thick HDPE offers more protection than the standard Pro Skid Plate
• Full linkage protection
• 40% lighter than aluminum and no rattling
• Mounting hardware and installation instructions included

T700 TENERE Bash plate was designed to withstand the harshest Aussie conditions. Bash plate is made from 5mm structural thick alloy plate and designed for maximum protection with minimum bulk.

Easy to mount and remove. Also includes a replaceable polyethylene linkage guard.

• Fully tig welded
• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• 4 Flush fitting mounts, 2 M8 and 2 M6
• Weighs 3.8kg
• Fits with Genuine Centerstand

Fits EURO 4 only

Enjoy maximum protection and durability with an SW-MOTECH skid plate. Fully welded aluminum construction is engineered in Germany to provide proper protection from impacts, abrasions and projectile debris. Multiple ventilation slots on the front, sides and bottom of the skid plate permit maximum air-flow to keep your motor cool. Drilling, cutting, welding or any other permanent modifications are not required.

Features:

• Debris and collision protection for the engine 
• Fully welded 4mm thick aluminum plate / black side made of 2.5mm thick aluminum
• Efficient underbody protection of stone-chipping and collision
• Provides protection for the vulnerable oil pan & lower engine cases
• 100% bolt-on, no drilling, cutting, or any other permanent modifications needed
• Ventilated design maximizes air-flow to prevent overheating
• Silver
• Designed & engineered in Germany

What's in the box:

• SW-MOTECH skid plate engine guard
• Mounting hardware 
• Installation instructions

• Maximum protection that will not corrode, discolor, bend or crack
• Provides protection for the engine care, frame rails, ignition cover and the water pump area on most applications
• Simple mounting system makes installation, cleaning, and maintenance (oil changes) a snap
• Snug fit prevents mud/dirt/rock/debris from building up between the skid plate and the motor
• Constructed of lightweight polypropylene
• Bike will run quieter and cooler compared to alloy skid plate

The SW-MOTECH Rear Brake Master Cylinder Guard is designed to fit the Yamaha Tenere 700. This guard protects the rear master cylinder from impact and prevents the foot from contact. A laser-cut and precision bent aluminum strengthening process makes the construction tough and durable and capable of withstanding heavier blows.

Features:

• Prevents contact between boot and foot brake cylinder and provides additional protection
• Lasered and bended from high-strenght aluminum.
• Brushed silver finish
• Easy Installation

Adventure bike heaven is off-road headed down a dirt road or a trail. If that is your dream, then as you know, you are going to fall. Sometime, someplace, it will happen, so be prepared! Save your bike before it happens.

SW-Motech makes some of the finest protection equipment available. The set-up for the Twin is available in a standard black powder coating or a semi-polished Stainless-Steel tubing. Both sets will protect the vital components of your motorcycle as well as you from damage incurred during a fall, slide or crash. They will preserve the frame, radiator, bodywork and other critical components from touching down with robust tubular steel. The black kit uses 27/21 mm tubing while the Stainless uses straight 22 mm tubing throughout.

Both configurations have a tight fit for great ground clearance and are designed to work seamlessly with other SW-Motech products like their Skid Plate/Engine Guard and SW-Motech Hawk light mounts. Three secure mounting points per side provide the necessary support that make these so strong. There is no drilling, cutting, welding or any other modifications required for mounting but still allows access to the oil filler, tool box and battery. Kit includes all necessary hardware and instructions and an aluminum cover to replace the OEM plastic cover at the lower mounting point on the left side.

Please Note that these Crash Bars are also compatible with the SW-Motech Skid Plate and the SW-Motech Centerstand.

Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Designed specifically for the Tenere 700, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.

Features:

• Two mounting points provide secure protection
• Full wrap guards
• Heat treated aluminum backbone bars
• Easy installation
• Compatible with all Barkbusters deflector guards (not included)

Add Plastic Handguards for a complete kit.

• Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
• Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
• Triple-lip seal design
• Dyno-tested to last 3 to 4 times longer than OEM seals
• Directional ribs allow seal to be installed easily
• Kit includes fork seals and dust wipers

• Includes the lower shock bearing and all other parts necessary to rebuild the suspension linkage
• 52100 bearing steel and hard-plated spacers resist wear and rust
• Each kit includes the lower shock bearing, all the shafts, seals and spacers in the link, link arm and lower shock mount

Lightweight, for reduced unsprung mass. Straight rate springs will give better control in the rough stuff. Sold in pairs.

Stock spring rate 0.60 kg/mm

Race Tech Recommends 5w oil, 2 qts to reach 110 mm oil level.

The correct spring rate for your weight will give a smoother more controlled ride. No more bottoming and better traction and confidence off-road. Kit includes required adapter collars

Stock Shock Spring 7.28 kg/mm

*Spring color may vary due to specification requirement and availability.

Lowers the rear suspension. Precision machined from billet aluminum and anodized.

Reinforced for added strength/durability when adding weight.

*Important when lowering the rear suspension you want to raise the fork tubes in the clamps an equal amount of inches that the rear is being lowered. That way your bike will sit level when done.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

The perfect tuner for users who are always on the move, the Power Vision 3 allows you to tap into more horsepower and optimize overall performance by quickly and easily flashing your ECU from anywhere.

• Easy-to-read, no-nonsense display puts performance at your fingertips
• Choose from a full library of pre-tested tunes or build a custom one on your own
• Compatible with Power Core software, allowing you to analyze performance data and make improvements. Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU
• Ability to store multiple tunes at a time
• Plug-n-play design attaches with O.E.M.-style connectors.
• High contrast display, viewable in direct sunlight
• Display vehicle data channels in real-time
• Weather resistant for use in all conditions

• Fits directly into OEM airbox with application specific Sealing Bead to ensure a precise fit
• Fuel-management modifications are not required for increased performance
• Pleated media provides a large filtration area offering long service intervals
• Washable and reusable, pre-oiled and ready to ride
• Designed to provide increased performance

Hiflo filtro air filters are manufactured to fit the factory air box and are a direct replacement for original equipment filters. Top quality powerflow filtering media, developed for modern high performance engines.

RadiusX is a high performance centrifugal auto clutch combining our TorqDrive and EXP technologies. TorqDrive provides more clutch disks in less space, allowing for maximum performance within your bike’s existing clutch footprint. You retain full control of shifting and use of your clutch lever with no compromise in power delivery.

Features:

• Dead-on clutch engagement every time
• Take off and stop in gear without using clutch lever – no more stalls
• Experience maximum power delivery
• Confidently navigate traffic and slow speed conditions
• TorqDrive® clutch pack delivers higher torque capacity and increased power transfer
• Rekluse sleeves eliminate basket wear and notching
• Standard clutch lever function with full override
• No modification to stock components
• Shifting transmission remains unchanged (clutch lever use is recommended for shifting)

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

14mm Thread

• The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963.
• Constructed using the best materials available.
• With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world.
• TUV approved and production monitored to ensure OEM or better quality.
• Sold as a package of 5 oil filters.

Keep your motor running right with fresh spark plugs!

NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.

• High-quality materials and superior construction for serious power and reliability
  • Pure alumina silicate ceramic insulator provides high strength and better heat transfer
  • Deep-seated copper core for a wider heat range
  • Nickel alloy tip for longer life
  • Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
• Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
• NGK plugs available for almost every application and riding style

• Lightweight levers are CNC-machined from aluminum
• Stock length; reach to the lever is adjustable to six positions

Sold Individually

MAGURA HYMEC – AN EASY TO INSTALL ALTERNATIVE TO A MECHANICAL CLUTCH.

This system replaces the clutch lever and cable – with a small lightweight hydraulic system for improved clutch control. The Hymec ensures an easier operating pressure, a constant pressure point, no more cable adjustment and smooth clutch actuation to ensure the perfect take-off every time. Hymec significantly improves vehicle performance – it allows the user to feel the point where the clutch releases and actuates. This product has been developed over many years and been tested under the toughest conditions possible in the world of motorcycle off-road sport. It has been used by world champion riders who all agree as to the benefits but it is just as useful to the complete novice who stalls at the traffic lights.

• This system replaces the clutch lever and cable – with a small lightweight hydraulic system for improved clutch control
• Up to 20% less clutch pull
• No maintenance and self-adjusting
• Smooth hydraulic feel with clear and consistent pressure point
• Operates on mineral oil which doesn't draw moisture and won't harm paint or finish
• Forged break-away lever blade with reach adjust is ready to mount
• Clutch safety switch included

This adapter will give you more mirror choices.

Yamaha mirrors have reverse threads on the right (throttle) side of the handlebars. This adapter allows you to mount a mirror with standard 10mm threads on the right side of your handlebar. This opens up many options for your mirrors, choose any 10mm mirror for your Yamaha.

• Torque spec: 5 Nm

ProTaper's ADV handlebars give you a bar taller than most with extra space on the control portion of the bar. These bars provide an additional 20mm of space next to where your levers and throttle are located for your GPS, phone cradle, auxiliary switches, etc . They come in Adventure (which is taller than stock) and Adventure High (which is even taller).

These are oversize bars, which means they are are 1 1/8", not the smaller 7/8" diameter. Therefore some bikes will require a adapter and there are several available to select from.

Using the same manufacturing techniques and materials as ProTaper’s industry-changing 1⅛" motocross handlebar, the EVO Adventure is specifically designed to provide adventure/touring riders with the increased comfort and control they need. With over 8" of straight section in the control areas, mounting vital components is made easier than ever. With its premium 7000 series aluminum alloy construction and computer-profiled four millimeter-thick wall design, the EVO Adventure Handlebar is up to 25% lighter and 45% stronger than competing handlebars.

• 1⅛" tubing at the clamping area
• Exclusive 4 mm-thick 7000 series aluminum alloy for superior tensile and yield strengths
• Optimum balance between fatigue life, impact strength, and impact-absorbing flex
• High-tech shot peened, stress-relieved, and anodized finish for unmatched durability
• Independent lab tests show that the EVO Handlebar leads the market in fatigue life
• Epoxy inner coating resists corrosion
• Chemically applied cut lines and alignment grid are scratch- and peel-resistant
• Plastic bar end plugs keep the elements out and provide a stronger base for grip ends
• Weighs only 1.55-1.7 lbs. (720-780 grams), depending on bend

Acerbis fuel tanks were designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service.

TechSpec’s flag ship tank grip material, Snake Skin, has over twenty years of material development. It’s not easy bonding adhesive to rubber. TechSpec’s, Motorcycle Tank Grips were developed to improve body, bike control and increase riders comfort. 

Gripping your motorcycle between your knees or thighs improves overall control of your ride by better securing your body weight and seat position under the forces of braking, cornering and acceleration while also relieving pressure from your wrists, elbows, shoulders and lower back giving you increased control and a more comfortable, safer ride. 

Snake Skin is a thin, 0.125” medium durometer “rubber” material that offers a secure, comfortable grip, durable protection and a clean stock look. 

This precut kit includes seven pieces, center tank protector included. The tail section is not included. This product is made using their aggressive adhesive.

White matte finish may absorb adhesive, staining paint.

The One-Piece Comfort seat is 11” wide and designed to improve weight distribution and support when seated while still allowing the rider to move freely when standing. Built to withstand the rigors of adventure riding, the T7 One-Piece Comfort seats are designed with the rider in mind.

Available in multiple cover options and three different heights: low, standard, and tall. Whether you have a 26” or 36” inseam, Seat Concepts has you covered.

 Available as a complete seat only, including seat pan. 

Engineered with precision and hand crafted with premium materials including Seat Concepts’ proprietary foam formula, the 8” wide One-Piece Rally seat is designed to provide you with an open cockpit for increased mobility during technical riding. 

Available as a complete seat only, including seat pan. 

Engineered with precision and hand crafted with premium materials including Seat Concepts’ proprietary foam formula, the 8” wide One-Piece Rally Hard Adventure 2.0 seat is designed to provide you with an open cockpit for increased mobility during technical riding and traction ribs to help keep you planted.

Available as a complete seat only including seat pan. 

Canyon Dual Sport saddle is designed specifically to provide long range comfort for your Tenere 700. We also offer a Bench style saddle that provides more freedom of movement for you that leans towards off-road riding.

Their high density Comfort Cell foam allows a sleek profile, while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure felt from the stock seat. In the nose area, they sculpt the saddle narrow to allow for good ground reach. Canyon Dual Sport has a seat height between the Yamaha Rally seat and Yamaha Low seat.

Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike.

For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's fusebox. All other components are built into the saddle and come preinstalled.

The design shown above includes Black Carbon-Fiber leather seating with Matte Black vinyl contrasting sides and a tasteful color coordinated Smoke Gray welt.

The default cover choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

With this seat having so little foam to be able to make it a low, there is a sacrifice in comfort. The T700 comfort low seat provides you with 7/8" of drop compared to the OEM seat for increased reach to the ground.

Available as a Foam & Cover Kit and an option for an OEM Rear Cover, replacement cover to match the Kit.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

The T700 Comfort Tall seat provides you with 1.25" of height compared to the OEM seat for increased reach to the ground.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Available as a Foam & Cover Kit and an option for an OEM Rear Cover replacement cover to match the Kit.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

The T700 comfort sport-touring seat provides you with an increased level of comfort and support to aid with those long days on the bike.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Available as a Foam & Cover Kit with rear cover only or rear foam & cover kit. 

It is a good practice to replace your sealing washer with every oil change. These 10 piece kits are made up of 5 Copper washers and 5 Aluminum washers. The manufacturer recently decided to make half of the kit Copper washers as that is the material of choice for many OEM manufactures. This gives you the opportunity to decide which you prefer, but either will work great at creating a leak-free seal between the case and the drain plug.

• The latest EVOLUTION of the popular LV ONE: aggressive sound and style
• Clean laser-etched Leo Vince logo in an innovative carved design (for the carbon fiber exhaust: bright aluminum die-cut high-temp resistant Leo Vince adhesive logo)
• Asymmetric design and high-tempiresistant full-carbon fiber end cap
• Impact-resistant sandblasted oval AISI 304 stainless steel sleeve – titanium look
• TIG-welded stainless steel front cup
• Adjustable full-carbon fastening strap
• Removable dB killer, weight savings and flawless installation

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh set now avoid having an exhaust leak when you install your new exhaust. This is for a set of two gaskets.

The genuine factory shop service and repair manual. This is the reference manual Yamaha dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your T7.

This product has been designed to fit the Yamaha T7 Ténéré

This kit will give you 80mm of adjustment over the stock screen.

In the raised position, the difference in ride comfort is remarkable. Wind noise reduction is very noticeable and airflow underneath your screen reduced the vacuum effect, creating smoother airflow and reducing turbulence.

In the lowered position, the screen sits at the same height as stock.

To adjust the screen, loosen the thumb nuts, slide into position and re-tighten the thumb nuts, no tools required.

A sturdy and compact tail rack formed from 1 piece of structural 5mm thick alloy plate. Mounting utilizes the rear factory mount and their hidden sub-frame mount bracket.

Please note a small notch on the inner black plastic guard is needed to mount bracket.

The rack comes pre-threaded for optional luggage plate attachment. 

• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• Weighs 1kg

Designed to make your compact rack even more versatile for riders who need a larger luggage platform. 

• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• Weighs 1kg
• Multiple attachments points 
• Pre drilled for Givi monokey mount system
• Pre drilled for roto pax fluid containers
• This listing is for the Rear luggage plate only
• Dimensions 25cm x 26cm flat surface 
• Does not include Pillion handles or base tail rack. Please see other listings for these items

ADD-ON

Pillion handles designed for quick and easy removal. 

• Pillion Handles for passenger
• Made from 12mm Solid round Bar
• Can also be utilized as tie rails for larger bags 
• This listing is for rear Pillion handles only does not include base tail rack or luggage plate. Please see other listings.

T7 Solo Carry rack has been designed predominantly for the solo rider to keep loads as forward and low as possible. The plate has multiple attachment points making easy to tie down bags.

The plate is pre-drilled for mounting systems for both Givi monokey and Rotopax. The rack is light in weight only weighing 2.3kg.

• Fits with standard seat only. Will not fit with Rally seat
• Fully tig welded
• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• 420mm x 260mm surface area
• Slim design
• Compact and rigid
• 4 Bolt removal

• Strong and durable hydro-formed 4mm aluminum for rigidity and low weight
• Black powder coating resists corrosion and keeps the plate looking good even with a little abuse (because we know you will)
• Specially designed for maximum stiffness for optimum support while remaining lightweight
• Designed to mount TRAX top cases and SysBag 15/30 soft bags (adapter kits sold separately)
• Large 1in bungee slots allow easy securing of soft luggage.
• Simple assembly to original attachment points with bike-specific components

Use in conjunction with Moose Racing Adventure Bike Rear Racks.  Plate only, Top Rack sold separate

• Increases overall rack surface area for a variety of basic plastic storage cases or larger soft luggage bags to be securely installed
• Easily attaches to rear rack with predrilled holes and locking tabs in several locations to mount more forward or back on the rear rack surface
• Attaches by locking in the tabs to rear rack and tightens down with a hand knob included in kit
• All mounting hardware and installation instructions included along with a threaded hand knob to install any variety of hard cases with center thread inserts

• Add convenient storage and function to your Adventure bike with these durable rear racks
• Laser cut from 12-gauge, grade 50 steel with durable matte black powder coat finish
• Multiple tie down locations and slots for bag straps or bungees
• Add additional storage capability with optional Adventure Rack Mounting Plates (sold separately)
• All mounting hardware and instructions included
• Rear rack weight limit 25 lb.

License plate holder has been designed to replace the bulky standard assembly with a sturdy, neat unit. The Tail tidy accepts the standard Yamaha blinkers and is supplied with a LED number plate light.

• 3 piece CNC machined from high-quality alloy
• Designed to bolt straight into position with no modification to the bike
• Available in polished or black ppa coated

Protect the most vulnerable components of your bike with this pair of R&G Engine Case Covers, now available in kit form. Engineered with 4mm polypropylene for superior strength, longevity and sleek aesthetics, these protective guards complement all other R&G crash gear perfectly.

Features:

• Crafted from 4mm polypropylene
• Bolt on installation atop existing engine case cover
• Low profile for maximum ground clearance
• Ultra lightweight with matte black finish
• Meets or exceeds AMA racing specifications
• AMA approved for use in any regulated event

Today's newest motorcycles are more likely to have flat-panel instrument displays than conventional mechanical gauges. And, like your cell phone, it's worth the effort to protect the often fragile and scratch-prone screen face with the new R&G Second Skin Dashboard Protection kit. Made from high quality, anti-scratch material, the R&G screen protector kit has been designed to preserve the clarity of your motorcycle's dashboard screen.

Features:

• High-quality protective plastic
• Excellent optics

Includes:

• (2) dashboard protectors
• Mini spray bottle
• Suede polishing cloth
• Wet & dry wipe
• Squeegee & dust-removal strip

Replace those worn out brake pads with quality EBC replacements.

• The perfect brake pads for leisure use
• Offer maximum durability and excellent braking performance
• Constructed of U.S.-made sintered bronze for longest lifetime
• Best for riding in water, mud, dust, or sand

EBC Double H Sintered pads feature the HH friction rating - the highest in the industry.

Provides maximum brake effect and lasts twice as long as organic pads.

The GBrakes steel braided brake lines for the T7 replace the stock rubber lines to enhance braking performance. Stock rubber lines expand under pressure giving a spongy and inconsistent feel at the lever/pedal.

This kit includes all 7 lines involved in the ABS braking system front and rear. These high quality lines utilize the finest materials available to eliminate expansion: Teflon inner hoses wrapped in 64 strand staInless steel weave, heavy duty hardware and machined fittings. A Crush Washer relief channel provides an effective double seal to stop leakage. Each line is replaced from the master cylinder all the way to the calipers and labeled to help with installation.

All the parts of this kit are designed, engineered, manufactured, tested and quality assured in the USA! All of these parts come with a lifetime warranty. Everything needed is included: Brake Lines, fittings and all necessary hardware and detailed instructions. Clear coated lines and silver fittings are the default setup, other color options are available upon request, please call for options. 

FunnelWeb ProLine Filter Highlights:

• Optimum air flow for increased riding time
• Improved engine protection
• Extended filter change intervals
• Simple to install, clean and re-oil
• Easy fitment

Like all FunnelWeb filters, the ProLine Filter features profile cut, single layer, single density foam that doubles the external surface area of the filter without increasing the original filter size. The ProLine Filter traps dirt, dust, sand and mud over a larger area on its outer surface, ensuring optimal air flow is maintained for maximized engine performance and reliability.

The single layer, single density polyurethane foam has the added advantage of being easy to clean and the ability to maintain its original shape after numerous washes. Overall, compared with conventional foam filters, FunnelWeb offers more protection from dirt ingestion, has longer service intervals and maintains high airflow rates when dirty.

Revolutionize your riding experience with Swiftkicker.
An adjustable kickstand for your motorcycle. Swiftkicker is built for offroad motorcycles, dual sports, and dirt bikes. Designed with the idea in mind that motorcycles should be able to take you anywhere, the Swiftkicker motorcycle kickstands help you do just that. You can set the length to anywhere in a six inch range of travel so you can stop anywhere without having to worry about having an even surface to park.

With just a flick of your toe, you can adjust the kickstand to the desired height, park your motorcycle, and be on your way. 
No longer will you have to search for a rock or piece of wood to prop your motorcycle up with, or even worse, coming back to your bike to find it has tipped over from unstable ground.

The Swiftkicker is 100% manufactured in the USA from the highest quality components. 
The billet 6061 head and the hard anodized tube are significantly stronger than the stock stand. An oversized foot will assure that the end of your stand stays where it belongs, rather than eight inches underground with your bike lying on top of it. The design is trail proven in the harshest possible conditions. Because nothing is indestructible, any of the kickstand components are replaceable at a lower cost than purchasing an OEM kickstand.

Measured from the center of the pivot to the bottom of the foot.

• Standard length travel range is 11.0"-15.0" (the middle of the travel is approximately the same length as the stock stand)

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.