Here we have right side plate that bolts to our ProCycle Side Racks for mounting your RotoPax fuel or water containers.
Limited quantity available for right side only.
Wide Adventure rack for the WR. Precision laser cut from .25" 5052 aluminum then powder coated black with a shot peened look. This rack is 11" x 17.5" and has numerous tie points for straps or bungees to secure a load. It is pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.
The ProCycle rack system is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.
Our racks allow for easy installation of both soft and hard luggage.
See the linked instructions for how-to videos.
Steel cargo rack from Moose Racing. It features a nice wide platform and a durable powder coat finish. 17" wide and 10" long.
An optional add on to your ProCycle Top Rack to relocate your rear turn signals with ease.
TIRED OF LOOKING FOR A GOOD PLACE TO ATTACH TIE DOWNS AND STRAPS?
The Green Chile Adventure Gear Uprising Soft Rack is all about adding mount points to your bike. It adds over 60 mount points to the rear and sides of your bike and its quick and easy to install and adjust. The Uprising Soft Rack can be used with or without GCAG accessories, but when you add the soft rack as the base of your luggage system and combine a few other GCAG accessories you will have the world's first customizable and modular luggage system. You will not find a more versatile system anywhere else.
Don't have a rack on your bike? No problem! The flexible Soft Rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style mount points.
The GCAG Uprising Soft Rack is the flagship Green Chile innovation. This unique product is compatible with just about any motorcycle and soft luggage combination that you'd care to throw at it. Adventure bikes, dirt bikes, and crusiers...the Soft Rack does it all.
Specifications:
(patent pending)
The Hardcore Soft Rack has been specifically designed for smaller bikes that have very little support in the back for luggage.
The loops on the base and the side straps provide attachment points for our strap kits to secure bags across the back and down the sides of your motorcycle.
We have incorporated two carbon fiber support bars to increase rear carrying capacity.
NOTE: Aluminum support bars have been upgraded to carbon fiber, there is no longer tire iron functionality.
Construction Features:
For mounting Hard Cases to various brands of side racks such as SW motech EVO quick lock, Moose or any racks with a rectangular design constructed with 5/8" to 3/4" material
ProCycle side panel guards to keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.
Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.
Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.
|
Comes with all necessary hardware: |
| (2) M6x16 hex flange bolts |
| Sub-frame bracket |
| (2) M8x30 hex flange bolts |
| (2) M8 nyloc nuts |
| (2) M8 washers |
Side Cover Guards Only. Complete luggage system available HERE.
The ProCycle top rack is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.
Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.
Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.
Multiple mounting points for various luggage and strap options. Includes a mounting point for a rotopax mount (not included).
Top rack is 15in wide by 11in from front to back.
|
Comes with necessary hardware and |
sub frame bracket: (2) M6x16 hex flange bolts |
| (2) M8x60 hex flange bolts | (2) M6X16 hex flange bolts |
| (2) M8 nyloc nuts | (2) M6 nyloc nuts |
| (2) M8 washers | (2) M6 washers |
| (2) 1 5/8" long custom spacers | (2) Rear turn signal brackets |
Top Rack Only. Complete luggage system available HERE.
The ProCycle rack system is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.
Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.
Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.
Multiple mounting points for various luggage and strap options. Top rack includes a mounting point for a rotopax mount (not included). Side panel guards keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.
Top rack is 15in wide by 11in from front to back.
This set includes the ProCycle Top Rack, Side Panel Guards, and sub frame bracket:
|
Comes with necessary hardware and |
sub frame bracket: (2) M6x16 hex flange bolts |
| (2) M8x60 hex flange bolts | (2) M6X16 hex flange bolts |
| (2) M8 nyloc nuts | (2) M6 nyloc nuts |
| (2) M8 washers | (2) M6 washers |
| (2) 1 5/8" long custom spacers | (2) Rear turn signal brackets |
| (2) M8x30 hex flange bolts | (2) M8 nyloc nuts |
| (2) M8 washers |
Rear fender carry all rack by Flatland Racing
This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.
It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your Honda.
Comes complete with all hardware and easy install instructions.
Using the included steel bracket to create 2 forward mounting points, this XT250 rack design is stronger and more well balanced than the typical "plate on the rear fender" design offered by other companies.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series XT250 rear rack which measures 10 inches wide and 12 inches long.
Easy to Install
Giant Loop’s 8-liter Fandango Tank Bag provides easy access to fuel, room enough to pack gear for a day trip or a long-haul journey, and is loaded with rider-friendly features similar to its smaller counterpart, the 6-liter Diablo. With its larger capacity, the Fandango provides riders a convenient way to carry larger items such as a DSLR camera, rain gear, first-aid kit, and more.
The Fandango makes packing a breeze with its handy movable interior divider featuring elastic organizers and a spot for your tire pressure gauge. With a fully lined interior that's compatible with hook-and-loop fasteners and an exterior mesh pocket, you'll have plenty of options to keep everything neat and tidy. Plus, if the weather decides to take a turn for the worse, we include a waterproof Tank Bag Dry Pod™ to keep your sensitive gear safe from moisture!
Siskiyou Panniers combine the convenience of top-loading hard panniers with the performance benefits of Giant Loop’s world-travelled soft luggage. Constructed with flexible, impact-resistant, and waterproof materials, Siskiyou Panniers deliver the ultimate lightweight, rugged, and compressible gear packing solution for on- and off-road motorcycle adventures. Choose the Siskiyou Panniers for multi-day rides when quick, top-loading gear access is a priority.
Whether it’s a quick overnighter or a multi-day adventure … the OBR ADV Gear 38l Adventure Saddlebag will get you to where you’re going and back with all of your gear. Ample amounts of capacity along with adventure tested robust construction makes the OBR ADV Gear Adventure Saddlebag the bag of choice for the hardiest of adventurers.
Features
100% Waterproof! Saddlebag Dry Pods update Giant Loop’s Great Basin Saddlebag and Coyote Saddlebag, replacing the Great Basin Dry Pods and Coyote Dry Pods.
Keep gear organized and dry with this set of 3 roll-top inner liner Saddlebag Dry Pods, featuring RF welded seams and air purge valves that make it easy to compress gear by squeezing air out of the sealed Dry Pods. Specifically designed to fit inside every version of both the Great Basin Saddlebag and Coyote Saddlebag – as well as the new Great Basin Saddlebag Roll Top and Coyote Saddlebag Roll Top – Giant Loop’s Saddlebag Dry Pods also can be used anywhere you need high-quality, lightweight dry storage.
Includes two side Pods and one double-ended center Pod. Backed by a Limited Lifetime Warranty against defects.
This bundle includes everything needed to attach dry bags or duffels to your panniers while adding the convenience of a pannier carry handle.
The Bag Snake is the perfect system to attach a dry bag or duffel to your panniers and the minimalistic design of the pannier handle means it can stay installed and never be in the way!
*Note: Most pannier mounting points can easily accommodate the Bag Snake. However, panniers such as Trax brand and the OEM Suzuki V-Strom panniers have low clearance mount points. For these style panniers you will need to add the optional low profile ring loops.
Features:
Bundle Includes:
The Mondo UL Kit is the next evolution of the GCAG product line. The "UL" stands for Ultralight. They have designed these straps to be light and rugged.
FEATURES:
The Mondo UL Kit has been designed to work with or without their soft racks. These straps allow you to use any bag you want for luggage. When installed properly you will be able to thrash about offroad and your luggage will stay put!
To use the Mondo UL Straps make a girth hitch around any mount point on your bike. Next, snap the buckles together and pull it tight. The Mondo UL straps are easy on and easy off.
MONDO UL KIT INCLUDES:
Need some extra protection from Mother Nature? We’ve got you covered with a full rain cover designed to slip over your 38l Adventure Saddlebags.
Features
* OBR ADV Gear 38l Adventure Saddlebags sold separately.
Fuel range and water storage is a concern of every adventurer. Easily carry 2l fuel or water bottles measuring 6”x8.5”x3.5” with the OBR ADV Gear Bottle Holster. The OBR ADV Gear Bottle Holster is a versatile solution to carrying 2l fuel/water bottles anywhere on your luggage kit utilizing existing luggage straps via a series of web loops.
Features
* Fuel bottle not included
Mount these polished billet aluminum spacers under your handlebar clamps to raise your handlebars 1 inch. High quality longer bolts are included.
Ease the pressure on your wrist during those long highway trips.
ProCycle has developed this unique kit to work with your OEM bars and controls. Just flip the thumb lever down to apply enough friction to hold the throttle in place.
Customize the power characteristics of your bike by simply adding an altered ration cam. The Control cam allows smoother more controlled throttle while the Quick cam lets you put the power to the ground quickly.
Throttle Lock Kit Includes:
Warp 9 Supermoto wheels are built with billet hubs, 7000 series aluminum rims and laced and trued with stainless steel spokes and nipples.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
Warp 9 Supermoto wheels are built with billet hubs, 7000 series aluminum rims and laced and trued with stainless steel spokes and nipples.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
Sun rims are our favorite. They are very strong and come very round and true right out of the box. Sun rims make building a wheel enjoyable. Standard rims are silver but Sun rims are also available in black or gold. Sun rims are made in the USA.
These custom rim and spoke kits can be made to work for any bike with wire spoke wheels. Your rim & spoke set will include Buchanan's custom heavy gauge stainless steel spokes and plated nipples. Please leave the year and model of your application in the comments section of the check out page. Also let us know which rim is front or rear.
Would you like us to build your wheels for you? Select Lace and True from the add-on menu and send us your hubs!
SpeedoDRD has been decreased in size to only 20mm square and epoxy sealed with weatherproof device connectors; making it the smallest, most durable, and most feature packed device on the market.
Note: The SpeedoDRD cannot alter your EXISTING odometer readout. The SpeedoDRD corrects and fixes the speed signal after it was altered by something else, such as sprocket changes or tires size changes or transmission changes.
High grade aluminum alloy front disk guard is the ultimate in front disc protection!
CNC’d and formed from aircraft grade 5052 aluminum. Covers and protects the rear brake master cylinder.
Frame Guards protect the frame from wear helping to keep your frame looking new. Mounting hardware is included for quick and easy installation.
Galfer Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
Galfer Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
By simply replacing a motorcycle's stock shock linkage with with a longer, stronger and lighter DeVol Lowering Linkage, a bike's seat height will be dramatically lower to help give those riders with shorter inseams a more confident and enjoyable ride.
Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.
Kouba lowering link will lower the rear 1.75". Comes with bearings and seals installed for a quick and easy installation. Instructions included. WILL NOT FIT THE CRF250L RALLY OR CRF300L.
By simply replacing a motorcycle's stock shock linkage with a longer, stronger and lighter DeVol Lowering Linkage, a bike's seat height will be dramatically lower to help give those riders with shorter inseams a more confident and enjoyable ride.
The DeVol Lowering Linkage is not recommended for aggressive riders or jumping. If you need a linkage to enhance the performance of your bike's suspension, the DeVol Transformer Pull-Rod is exactly what you are looking for.
Cogent Dynamics has created another winner - the 'World's Edge' shock for the 650 V-Strom the rear end you have wanted for all these years. This unit gives the DL650 excellent control with a firm but comfortable ride, both solo and two-up. This shock is equipped with adjustable damping control so you can customize the action to your preference. Please call for lowering options also if you need them.
The Bling Ring preload adjuster and thrust bearing on the spring make preload changes easy when you fill the bags and add a copilot. Keeping the ride height up can make the difference between a good handling motorcycle and a peg scraping pig. Want to make it easier yet? Add a Hydraulic Preload Adjuster like the stock shock has.
Includes mounting bracket.
Bikes with ABS require the hydraulic preload adjuster
Tired of your mushy front suspension? ProCycle now offers heavy duty fork springs for the TW200!
Includes material for spacers.
Stock Spring Rate is .50 kg/mm. The .60 kg/mm springs are 20% stiffer than stock while the .70 kg/mm is 40% stiffer than stock.
Included in this kit are fork springs, Cogent DDC (Drop in Damper Cartridge) performance cartridges and one bottle of 5w fork oil. Refresh those tired old forks and make them better than new. These DDCs from Cogent are easy to install. No taking the forks apart, no drilling of the damping rods, nothing. Just take them off, flip them over to drain the oil, add new 5w oil, drop in the DDCs and then add the springs.
This upgrade offers better control off-road as well as on. Less brake dive keeps the fork up in the middle of the stroke on-road and better control off-road whether it be rolling water bars or bouncing off the rocks.
Stock Spring Rate is .50 kg/mm. The .60 kg/mm springs are 20% stiffer than stock while the .70 kg/mm is 40% stiffer than stock.
DDC Tool will not work with this spring series
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
Low peg mounts for the DR From Wirtz Wire. These are different than our other mounts for several reasons. First, these are designed around the stock pegs. All of the pegs in this section will fit these mounts. Another difference is that these mounts are offered in a low mount as well as a low and rearward mount. These are 'wire EDM' machined from solid 1018 steel bar stock, and are not welded anywhere. They are powder coated black for a great look. Both mounts move the pegs down 2" while the low and rear mounts also move the pegs back 1.3".
Kit comes with new mounts, longer bolts and a longer brake switch spring that will be needed. Pegs are optional, your stock pegs will work.
The upper image shows the low and rearward mounts while the one below that is of the just low mounts. If you look at the two images below that, you will see that these are the low and rearward pegs for both sides of the bike.
Here's the Moose Racing seat for you XR650L riders. This is a complete seat that's installed on a new seat pan. Take your old seat off and put your new seat on and get back to riding! The durable micro-fiber suede top cover enhances rider comfort and increases stability. Side gripper panels ensure secure seating during aggressive maneuvers. The cover is constructed from smooth marine-grade vinyl and features an embossed Moose Racing logo. It includes a strap kit that enables secure attachment of cargo to the pillion section of the seat.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
Sargent World Sport Performance Modular Seat System with ZONE SUSPENSION BODY CONTOUR TECHNOLOGY.
Honda Africa Twin, 2016+ (CRF1000L) and Africa Twin Adventure Sport 2018+ (CRF1000L2) with ZONE SUSPENSION BODY CONTOUR TECHNOLOGY.
Transform your Honda Africa Twin and Adventure Sports into a long-distance explorer! Sargent's patented Zone Suspension Body Contour Technology, beautiful hand-crafted upholstery, and high-quality lightweight precision construction make World Sport Performance Seats the best choice for the long-haul.
In addition, this two-piece World Sport Seat offering for the Honda Africa Twin features marine-grade, UV-stabilized, hand-crafted upholstery specifically designed to maximize the suspension qualities of the Super Cell Foam.
Corbin has replaced the stock two-piece seat with a single seat model to provide more structural support. Corbin has created two models, one to maintain the stock seat height, and one to provide an easier ground reach like the stock seat in a lower position. By designing each seat specifically, they were able to keep excellent ergonomics. Corbin's saddles are designed to work with the optional Honda saddlebags. Mounts to the motorcycle similar to stock and secures with the Honda key lock system. All brackets are included and pre-mounted on the seat so it's ready for immediate installation.
Passenger seating area is designed with a neutralized platform to resist sliding forward in the saddle. Dished shaping provides an excellent contact patch and maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest as shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike. Please note, the Corbin backrests may not work in the saddle if you are using the Honda trunk.
Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.
The design shown includes Black Grabber seating with Asphalt vinyl contrasting sides and nose with a tasteful color coordinated welt. Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
The Corbin seat provides a platform that offer an increased area of body contact to give excellent weight dispersion and eliminate hot spots. Neutralized to curb the tendency to slide in the saddle which will greatly reduce fatigue. The shaping of the Corbin saddle relieves centralized pressure and supports from the sides instead. They build the saddle up with their exclusive Comfort Cell foam for a firm, supportive ride that lasts. Comfort Cell will support you for years and will provide a personalized fit after break in (approx 1,500 miles).
Accepts a removable backrest (as shown) for your passenger to add more comfort and security. Corbin's backrest install with a single screw and adjusts easily to your copilot's riding posture.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
On the model shown they've used a variety of materials for a custom yet subtle touch. Shown: Black Carbon-Fiber seating, Matte Black sides, Pigeon Grey welts, Silver stitching and Gold Corbin logo. (please specify details at checkout if similar look is desired)
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.
Designed to maximize comfort and usability while providing a custom look and longer riding range. Corbin saddles are shaped to provide contoured support that lasts all day and will become your favorite accessory the first ride out. For this model, Corbin has positioned the rider in the 'sweet spot' which greatly improves the ergonomics and control.
This Corbin seat provides a platform that offer an increased area of body contact to give excellent weight dispersion and eliminate hot spots. Neutralized to curb the tendency to slide in the saddle which reduces fatigue. The shaping of the Corbin saddle relieves centralized pressure and supports from the sides instead. Corbin builds these saddles with their exclusive Comfort Cell foam for a firm, supportive ride that lasts. Comfort Cell will support you for years and will provide a personalized fit after break in (approx 1,500 miles).
Another great benefit of neutralized seating is that it creates a nice back support area for the rider. The step in the saddle gives both platforms a level posture and also creates 6.5 inches of lower back support for the rider. Even with the improved shaping, the Corbin Canyon Dual Sport saddle still provides a clean, flowing line on the bike.
You can add the optional removable backrest (shown) in passenger seating area to add more comfort. Corbin's backrest models install with a single screw and adjust easily to copilot's posture.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Canyon Dual Sport saddle is designed specifically to provide long range comfort for your Tenere 700. We also offer a Bench style saddle that provides more freedom of movement for you that leans towards off-road riding.
Their high density Comfort Cell foam allows a sleek profile, while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure felt from the stock seat. In the nose area, they sculpt the saddle narrow to allow for good ground reach. Canyon Dual Sport has a seat height between the Yamaha Rally seat and Yamaha Low seat.
Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike.
For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's fusebox. All other components are built into the saddle and come preinstalled.
The design shown above includes Black Carbon-Fiber leather seating with Matte Black vinyl contrasting sides and a tasteful color coordinated Smoke Gray welt.
The default cover choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Seat Concepts seats are constructed using a foam material that is higher quality than OEM seat foam. Their proprietary formula is plush, while still offering the necessary amount of support. Their unique comfort and shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These great features combine to offer you a custom seat feel, and provide greater enjoyment and increased range for long commutes, or Dual-Sport rides!
The Complete Seats come assembled with an high quslity aftermarket pan and ready to ride.
| Width: | 12 5/8" (321mm) |
| Height: | Same as OEM |
The Commuter seat maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but has a dished seating position towards the mid-point to distribute rider weight over a greater area. This dished area is also wider than the stock seat to increase support. The passenger platform is the stock shape.
The Commuter seat is the best choice for extended pavement riding and mellow offroad. The unique shape and added width will provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Fits Models/Years:
2004-2007 950 Adv.
2008-2013 990 Adv.
2009-2011 990 Adv. R
2013 990 Adv. Baja
The Foam and Cover Kit is only for the OEM pan. It DOES NOT include the pan.
| Width: | 13" (330mm) |
| Height: | 3/8" (10mm) Lower than stock |
For DL650 2012 - 2016. This new shape offers better comfort and support and also addresses the slope into the tank issue that the stock seat has. The passenger seating area is built up at the front to help the sliding effect into the main rider.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Photo may not represent exact cover option.
| Width: | 14.5" (368mm) |
| Height: | Same as OEM |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
| Width: | 9.5" (241mm) |
| Height: | Same as OEM |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
With this seat having so little foam to be able to make it a low, there is a sacrifice in comfort. The T700 comfort low seat provides you with 7/8" of drop compared to the OEM seat for increased reach to the ground.
| Width: | 10.5" (267mm) |
| Height: | 7/8" (22mm) Lower than stock |
Available as a Foam & Cover Kit and an option for an OEM Rear Cover, replacement cover to match the Kit.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
The T700 Comfort Tall seat provides you with 1.25" of height compared to the OEM seat for increased reach to the ground.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
| Width: | 10.25" (260mm) |
| Height: | 1.25" (32mm) Taller than stock |
Available as a Foam & Cover Kit and an option for an OEM Rear Cover replacement cover to match the Kit.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
The T700 comfort sport-touring seat provides you with an increased level of comfort and support to aid with those long days on the bike.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
| Width: | 13" (330mm) |
| Height: | Same as stock |
Available as a Foam & Cover Kit with rear cover only or rear foam & cover kit.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Developed for Baja racing, their comfort model maintains a similar contour to stock at the front of the seat and tapers out towards the mid-point to distribute rider weight over a greater area. The Comfort seat is wider than stock, but not so wide that it would hinder movement in aggressive race situations.
The comfort model strikes the perfect balance between an aggressive race profile and a wider more comfortable seat.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Available as a Foam & Cover Kit for OEM pan.
| Width: | 7 3/4" (197mm) |
| Height: | 1" (25mm) Lower than stock |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
On this model, they built up the front of the seat, but dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
| Width: | 12.5" (318mm) |
| Height: | Same as OEM |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Carbon Fiber Sides/ Gripper Top
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
| Width: | 10" (254mm) |
| Height: | Same as OEM |
Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points. Each individual seat model was specially designed to increase comfort without compromising ride ability.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Available as a Foam & Cover Kit for install on OEM pan.
Fits Models:
(2020-22) KLX230
(2020-22) KLX230R
(2021) KLX230 ABS
(2021-22) KLX230R S
(2022) KLX230 S
(2022) KLX230 S ABS
(2022) KLX230 SE
| Width | 9 inches |
| Height | Same as OEM |
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.
Optional Heat Shield Strip will protect your airbox from the close proximity of the hot head pipe.
Our very own high flowing head-pipe is made in the USA using a CNC (computer numerically controlled) mandrel bender for an absolute perfect fit. It is a high quality 2-piece 18 gauge stainless steel head-pipe with 1 3/4" outer diameter, compared to the stock outer diameter of 1 1/2".
The SS Pro-Flow is a tested upgrade over stock that will bolt right on with no modifications needed. It is compatible with any combination muffler/mid-pipe, as well as all motor configurations of the DR650 '96-current.
Includes a stainless steel band clamp for the mid-pipe joint, clamp-on heat shield mounts, to use with stock heat heat shield and a stainless steel flange at the exhaust port mount. We recommend a new exhaust gasket when installing your new SS Pro-Flow.
The FMF Gnarly pipe focuses on increasing the lower RPM horsepower and torque to get you out of the toughest terrain. When looking to add 4-stroke tractor like torque to your 2-stroke and you need a pipe to withstand the harsh elements, this is the pipe for you. Strong and rugged, this aggressive pipe dishes out handfuls of torque and bottom to mid range pull needed for late model 200cc through 500cc machines and the rigors of the off road domain.
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels. Includes clamp-on mounts for the stock heat shield. We recommend Anti-Seize on exhaust fasteners.
Ultra-Light, Race Inspired Titanium Muffler
Available in slip-on/bolt-on and full system configurations depending on the application
Straight-through design of the spark arrestor canister and the Performance Flow stainless steel end cap ensure strength, durability and unrestricted power.
When designing the PowerCore 4 HEX, they looked at their top of the line products to deliver race-inspired performance at an economical price. The end result is a quality muffler with improved torque, increased horsepower and rugged durability all at a price that won't break the bank.
Features:
Stainless steel can and carbon fiber end cap.
All Street Series systems are Slip-on / Bolt-on applications that do not require tampering with the vehicle's emissions control system.
By popular demand. This is our own mid-pipe adapter kit for the GSXR exhaust cans. The unique design works with both 3-bolt Hayabusa and 4-bolt GSXR mufflers. It features all stainless steel TIG welded construction with a laser cut adapter. A spring tensioned slip joint allows for heat expansion. A stainless steel hanger strap allows it to attach to your original muffler mounting point. No welding is required. Mid-pipe length is approximately 17" long.
This mid-pipe does not require a stock muffler joint gasket when used with the stock headpipe, the SS Pro-Flow, or the FMF headpipe, eliminating the hump in flow.
Don't forget a fresh seal ring gasket that fits between your muffler and mid-pipe adapter.
The RS-4 Race Series slip-on gives the CRF250L more power and torque, the RS-4 provides more punch at bottom end without sacrificing the mid and top power. The slip-on also removes a good amount of weight from the stock unit. Those that love the Yoshimura RS-4 sound will love the way it makes the CRF250L Rally sing!
Proudly made in the USA!
The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal, and is easy to install.
The ProCycle SS1 muffler was designed so this existing spark arrester will fit right in. This is also the same unit that is often adapted to the GSXR 40F0 muffler. It fits FMF exhaust as well.
This nice piece replaces your plastic sprocket cover and protects your engine case from a chain derailment or failure. The 3/16" (5mm) thick steel plate is adjustable to accommodate 14, 15 and 16 tooth sprockets. Includes mounting hardware.
CNC laser cut from 1/8"5052 aluminum then black powder coated and the logo laser etched in place with the V-Strom 650 logo to really set it off. The laser etched logo will not wear off like a vinyl or screen printed graphic.
Heavier gauge aluminum than other aftermarket guards and better coverage than the stock guard. It also will not crack at the stress points. Uses the stock mounting screws.
Don't like the low fender on your TW200? The ProCycle High Mount Fender Bracket allows you to mount your fender under the lower triple clamp to create more clearance around your front wheel and drastically improve the look of your T-Dub.
The kit is made of high-quality steel components manufactured in the USA, and includes the bracket and all required hardware.
| 4 | 8x40 Bolt |
| 4 | 6x20 Bolt |
| 6 | 6x16 Washer |
| 4 | 6mm Nyloc Nut |
| 2 | Spacer |
Don't forget to add a new fender for that supermoto look!
Moose Adventure Windscreen
The shorty screen in 5" shorter than stock shield.
The Parabellum Windshield is both taller and wider than the stock shield offering more protection from wind, rain, weather, and anything else you may come into contact with on your journey. The Africa Twin’s off-road roots are not forgotten by this windscreen. The stock Barkbuster like hand guards clear the windshield at full lock while the shield is forward mounted and upright allowing the shield to work well while you are standing on the pegs and moving around on the bike off-road. On the street, you can expect smoother, quieter, over the helmet air flow while improving fuel economy and comfort. The Parabellum screen for the CRF1000L mounts easily with an included screw kit in the stock location. It's made from 3/16 inch cast acrylic and is 16 inches wide at the top. The windshield is available in clear or tint and 3 different heights.
The new Touring windshield for the 2008-on Kawasaki KLR650 has been completely redesigned to both improve protection as well as appearance.
Parabellum utilizes the stock windshield screw locations with our angled brackets to mount the newly designed shield. The windshield uses stand-off technology so the shield is more upright. This allows a smaller shield to give more protection. This also keeps the top edge of the shield away from the rider when standing on the pegs and using other off-road riding techniques.
The Parabellum Touring shield for the KLR is also significantly wider and taller than the factory windshield maximizing comfort and wind protection.
The windshield measures 14.5 inches wide and is available in two heights. We recommend this windshield for those seeking maximum protection. The shield is made of 1/8 inch cast acrylic and offered in clear or tint.
Make it easy to pull the rear axle out of your V-Strom. This little handle goes into the hollow axle and then tightens down to give you a handle so you don't have to tap it out from the other side.
This retainer is has a no hassle installation for quick change sprocket swaps with simple readily available tools (pliers and screw driver).
This spring clip retainer takes the place of the OEM two bolt retainer and fasteners when a FRITZCO sprocket is used.
Designed for OFF ROAD USE with the thought in mind that you can ride to your favorite off road spot using a 15 or 16 tooth sprocket and larger than stock rear sprocket. Then quickly change to the 13 tooth and enjoy the ripping torque provided by the huge amount of reduction the 13 tooth offers. Making the XRL much better in the technical stuff. You will really be surprised how much better a big bike like an XRL handles off road with low gearing.
This retainer can only be used with FRITZCO sprockets and can not be used with thin OEM type sprockets.
Replacement retainer if yours is worn out or lost.
This retainer is has a no hassle installation for quick change sprocket swaps with simple readily available tools (pliers and screw driver).
This spring clip retainer takes the place of the OEM two bolt retainer and fasteners when a FRITZCO sprocket is used.
All sizes of new FRITZCO sprockets come with a quick change retainer included, this is only a replacement.
This retainer can only be used with FRITZCO sprockets and can not be used with thin OEM type sprockets.
FRITZCO front sprockets are a straight up no hassle installation. Their sprockets are machined from alloy steel that in every way is comparable to OEM Yamaha and the best offered by other manufactures. The sprockets are then given a heat treatment that provides a compatible sprocket for the Yamaha output shaft and longest chain wear life possible.
Polyurethane drive cushions for the DR. Polyurethane has a higher abrasion, cut, and tear resistance than rubber as well as much better resistance to chemical breakdown. This will offer longer life and better damping when compared to the stock rubber cushions.
This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.
Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.
Originally designed to give you a place to attach tie-downs to the triple clamp of a dirt bike but, there are many other uses, such as bungee attachment points or in the bed of a truck or trailer, behind passenger peg bolts on a street bike or anywhere you can put a bolt.
The GCAG Mount Point is a sturdy piece of hardware to make it easy to attach soft luggage and straps to your motorcycle or any vehicle. Made of stainless steel, it will never rust and its strong enough to hold any luggage you care to throw at it.
Sold individually.
SUGGESTED USES:
FEATURES:
DIMENSIONS:
OEM Fit for CRF450L rear tail light + turn signal connectors.
Pins pre-installed and pre-crimped with wire for easy install.
Set Includes: Connectors for left and right turn signal and tail light.
This kit is specifically for attaching After-Market tail light and turn signals.
Yoshimura has always been synonymous with quality craftsmanship, precision fitment, and impeccable quality. The Fender Eliminator Kits are no exception, and they are sure to give your motorcycle the sleek race look that every rider craves
Features:
GoldPlug is the gold standard in engine protection.
Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.
10MM Thread for frame drain.
Boyesen Pro Series dual-stage reeds combine a carbon-fiber top reed with a fiberglass bottom reed for unrivaled performance. The Pro Series Reeds are more responsive than our traditional Power Reeds. The carbon-fiber top reed has excellent response characteristics that provides even quicker acceleration, stronger throttle response, and more over-rev than our standard Power Reeds. The fiberglass bottom reed provides stability and longer reed life.
Our very own high flowing head-pipe is made in the USA using a CNC (computer numerically controlled) mandrel bender for an absolute perfect fit. It is a high quality 3-piece welded two into one, stainless steel head-pipe.
The SS Pro-Flow is a tested upgrade over stock that will bolt right on with no modifications needed.
We recommend a new exhaust gasket when installing your new SS Pro-Flow.
