Spring time is in full swing here at ProCycle. With these busy days please be sure to let us know if your order is time sensitive. We try to do as much as we can to accommodate your upcoming trip.
Moose Racing's Heavy-Duty, 4mm thick 5052 aluminum, to protect expensive and fragile radiators from side impacts and twisting.
IMS Products 'Adventure Tank' for the Yamaha WR250R/X. They call this an Adventure tank because it maximizes your capacity preparing you for those extended trips without the need to stop and fill up. This tank has a 2.75 gallon advantage over the stock fuel tank and it handles it well.
IMS made this tank to replace the stock radiator shrouds and keep the fuel down low for a lower center of gravity, improving the handling and stability of the bike. They also have installed a lift pump to allow the stock fuel pump to stay in the standard position while efficiently utilizing the entire capacity of the tank. It is available in Natural, Black, Blue, Red and White.
*Graphics For This Tank Are No Longer Available*
Wing Tank - Does Not Use OEM/Stock Shrouds
Using the included steel bracket to create 2 forward mounting points, this WR250R rack design is stronger and more well balanced than the typical "plate on the rear fender" design offered by other companies.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series WR250R/X rear rack which measures 10 inches wide and 12 inches long.
Easy to Install
Wide Adventure rack for the WR. Precision laser cut from .25" 5052 aluminum then powder coated black with a shot peened look. This rack is 11" x 17.5" and has numerous tie points for straps or bungees to secure a load. It is pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.
Finally, the ultimate Adventure peg, from the folks at Fastway - Pro Moto Billet. This peg is big enough to stand on all day with no fatigue, it measures 2.25" front to back and is 4.75" wide.
In addition to the big size, you can also adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. You can further customize them with 3 styles of patented adjustable threaded cleats. Take your traction from comfortable to gnarly. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. You can also order serrated (F5 - bottom left image) or spiked (F6 - bottom right image) cleats separately.
These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.
Made of military aircraft grade 3/16" cast acrylic, this guard will protect your lens from roost, rocks and branches. Optical clarity of the acrylic ensures brightness and projection of your headlight are minimally effected while all the while protecting your headlight from impact and abrasion.
Guards are held to the headlight lens with an industrial strength hook and loop system on each corner.
A small light-duty Dual Sport Rack for the WR. Precision laser cut from 3/16" 5052 aluminum. It is powder coated black with a shot-peened look. This rack is 9" x 10.5" at widest points and has numerous tie points for straps or bungees. It's pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in about 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.
Master Cylinder guard by Moose Racing will protect the exposed rear brake master cylinder from damage
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
DG Performance exhausts help your engine breathe better, resulting in increased throttle response, power and torque.
The V2 Series Slip-On muffler features:
Standard sound level is approximately 98 db and quiet core inserts are available separately.
This Lightweight Slip-On weighs approximately 5.5 lbs and bolts directly to the stock headpipe.
It is equipped with a US Forest Service-approved spark arrestor.
We start with Excel or Sun rims, OEM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.
Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
Galfer Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
CycleRacks are made out of Schedule 40 11/16 black steel pipe, bent in a press, and welded together in a jig. All of their racks have the same platform, 18" wide by 12" deep. Includes lower mount hardware.
All of their products are 100% made in the USA. If the rack is ever broken for any reason, CycleRacks will replace it for free, you just pay the shipping.
Cycle Racks Bag Supports can used for many different Cycle Racks and can be used on either the front or rear rack.
When they developed these, they wanted a functional, yet "Easy On- Easy Off application. The pig tail hook goes up, over and underneath the bar of the rack, they can also be used upside down on the rear rack as side boards. To install them, wing them out, slide them in place and then wing them back down. Simply reverse the process to remove them.
Rok-Straps are supplied to secure them in place. They are pre-drilled to accept the pattern of the Roto-Pax Pack Mount (sold separately) so you can carry fuel or attach them to your own bags.
They are sold together in a set of one right support and one left support.
COLOR: Black
For reference, the stock gearing for the WR250R is 13/43 while the X model runs with a 13/42 stock configuration because of the SM wheels/tires. Both use a 108 link chain with the stock gearing.
The JT rear sprockets listed are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.
Limited availability on Aluminum from PBI. Manufactured from aircraft 7075 T651 Plate Aluminum.
If you want the additional low-end grunt that the 46, 48 or 50 tooth rear sprocket will give you, you will need longer chain as well.
New Rear Sprockets require new Sprocket Bolts because of a difference in the holes vs. the stock bolts.
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
The WR Speedo is driven by the motor and is inaccurate up to 10% in the stock configuration. Change your gearing and it gets worse. This speedo calibration device is the smallest in the world and has the widest calibration range available. It has a simple plug and play installation that you do have to program, but easily done just using your current gearing. Change your gearing, easy to change your speedometer.
Other beneficial features include:
Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists and then anodized black.
PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.
Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem. See bottom image.
Their is a lot of technology packed into this tail light / fender eliminator kit. You have programmable turn signals and Safety Brake Pulsing both built into this product.
You can enable or disable the safety brake pulsing feature.
This kit includes only the highest quality components, including the pre-installed 12oClockLabs processor board, which is made in the USA.
We recommend a "Fixed Rate Flasher" unit for use with this kit. When you install aftermarket signals it changes the load on a factory signal system.
This kit does not include parts to mount aftermarket turn signals. The pre-installed processor board allows the turn signals to be integrated in to the tail light.
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels. Includes clamp-on mounts for the stock heat shield.
For FMF mufflers only
The EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles. Flame laminated foam: Both "Stages" are not glued but heat sealed to provide maximum air flow. Light color foam makes it easier to see where the filter oil has covered and where it has not.
This device will pulse your brake light automatically. There are over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device.
Features:
New wider seat to help keep comfortable on that long commute or dual-sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike. The Complete Seat comes with an aftermarket pan with the foam and cover kit assembled, ready to ride.
| Width: | 9.5" (241mm) |
| Height: | Same as OEM |
The Pro-Series is an excellent replacement for the stock shock. With both compression and rebound adjustable as well as preload adjustable, you can tailor the performance to match your riding style. Compact and rigid design with piggyback type reservoir specifically engineered for your WR250R. Fully serviceable shock is designed for the long haul.
Select the spring you want installed based on the load you plan to carry. Choose the 'standard' 8.15kg/mm spring for rider/ luggage up to 220lbs. Weigh more than 220 lbs, or are loaded to the max, think about the 10.19kg/mm 'heavy' spring.
Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with crosslinked polyethylene for extra strength and durability.
Natural color is recommended to easily see the fuel level in the tank. Includes cap and fuel petcock.
A Moose Racing headlight guard by will protect the headlight from flying debris
The Rally windscreen from Parabellum is the perfect protection from wind and debris without sacrificing technical off-road capabilities. This is an upright rally type windscreen that looks aggressive and performs well under all types of riding. Designed primarily for the off-road / dualsport enthusiast, this shield keeps pressure off the rider's chest while commuting from home to adventure and back.
Mounting is accomplished by drilling two holes on each side of your headlight cowl using the provided template. 13.5 inches tall, 11.5 inches wide at the bottom, and 8.5 inches wide at the top. Made from military aircraft grade cast acrylic.
This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.
It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.
Comes complete with all hardware and easy install instructions.
Kouba lowering link will lower the rear 0.80”. When combined with stock lowered clevis, lowers the rear a total of 1.75”.
Comes with bearings and seals installed for a quick and easy installation. Instructions included.
Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.
Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort.
From JNS Engineering, a super solid Rear Master Cylinder Guard for the XT250, WR250R and X. CNC formed and then powdercoated black for lost lasting corrosion protection. Did we mention how good it looks? All hardware provided.
New wider seat to help keep comfortable on that long commute or dual-sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
The Foam and Cover Kit is only for the OEM pan. It DOES NOT include the pan.
| Width: | 9.5" (241mm) |
| Height | Same as OEM |
The new Fastway Evolution AIR footpegs are now the ultimate pegs in the Universe.
Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.
You can also order serrated or spiked cleats separately. See images.
These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.
Handlebar mounts that replace your stock clamps.
These raise your handlebars 1 inch.
Available in 7/8" for standard handlebars allow installation of your choice of 7/8" off road handlebars.
