Search Products

GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

• Significantly improves response and feel over factory rubber lines
• Largest performance improvement for your money over any other braking upgrade
• Stainless steel hose resists abrasion and puncture
• Teflon core does not degrade over time like rubber lines
• PTFE Dupont 64 Teflon® hose
• Feature a heavy-duty stiffener sleeve and route just like the factory lines
• Proprietary, premium fittings
• Banjos utilizes a unique machined channel and sealing surface for leak-free installations
• R&D and engineered in the USA
• GBrakes USA controls the manufacturing process, ensuring the highest level of quality control

The GBrakes steel braided brake lines for the big Twin CRF1000L replace the stock rubber lines to enhance braking performance. Stock rubber lines expand under pressure giving a spongy and inconsistent feel at the lever/pedal.

This kit includes all 7 lines involved in the ABS braking system front and rear. These high quality lines utilize the finest materials available to eliminate expansion: Teflon inner hoses wrapped in 64 strand staInless steel weave, heavy duty hardware and machined fittings. A Crush Washer relief channel provides an effective double seal to stop leakage. Each line is replaced from the master cylinder all the way to the calipers and labeled to help with installation.

All the parts of this kit are designed, engineered, manufactured, tested and quality assured in the USA! All of these parts come with a lifetime warranty. Everything needed is included: Brake Lines, fittings and all necessary hardware and detailed instructions.

GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

• Significantly improves response and feel over factory rubber lines
• Largest performance improvement for your money over any other braking upgrade
• Stainless steel hose resists abrasion and puncture
• Teflon core does not degrade over time like rubber lines
• PTFE Dupont 64 Teflon® hose
• Feature a heavy-duty stiffener sleeve and route just like the factory lines
• Proprietary, premium fittings
• Banjos utilizes a unique machined channel and sealing surface for leak-free installations
• R&D and engineered in the USA
• GBrakes USA controls the manufacturing process, ensuring the highest level of quality control

Made with heat-treated carbon steel for longer wear life and reduced galling. Stock size, simple bolt-on procedure.

• manufactured from unique ebc low carbon hpsr steel
• laser & cnc punched for lightness
• hardened and ground for precision braking
• nickel coated to resist corrosion

• Sintered Pads are best for regular riding. Long life, and good performance in all conditions
• Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand
• Race Sintered are designed for racing use only; not for street use

Includes front and rear brake pads.

• Kits contain all parts needed to re-seal leaking master cylinders
• Includes cup seals, copper washers, o-rings and replacement screws where applicable

Genuine Kawasaki replacement chain guide. This guide mounts to the lower swing arm.

Chain sliders may undergo degradation over time due to the friction produced by the chain's movement. Restore optimal performance by utilizing this authentic Yamaha component.

Available for stock gearing, 45 tooth rear sprocket

• Computer-designed to achieve ultimate strength at minimum weight
• JT combines leading-edge technology with top materials to produce the ultimate quality sprocket range with unbeatable value
• Every sprocket meets or exceeds the highest possible quality standards set for the motorcycle industry
• Sprockets are heat-treated and bead-blasted to reduce material surface tension
• Unless noted, rear sprockets made with top-quality-grade C45 high-carbon steel
• Size 38T

• Stock gearing uses a 15 tooth sprocket
• Use a 13 tooth sprocket for REALLY low off-road gearing
• Use a 14 tooth sprocket for off-road performance
• A 16 tooth sprocket will give you lower RPM at highway or street speeds

High quality steel sprockets.

Stock Gearing: 15/48-128x128

• CNC machined anodized axle blocks
• Made of A6061-T6 aluminum
• Rotate using the forward and reverse positions, able to offset axle shaft 13mm in reverse position. (Mini size is 11mm)
• Scales on both sides of axle block for easy adjusting

This is a complete drivetrain package. All the parts you need to freshen up the most important part of your motorcycle.

• Polyurethane Drive Cushions
• Ball Bearing Chain Roller
• Sprocket Bolts and Nuts
• Lock Style Rear Axle Nut
• EK SR06 520 O-Ring Chain
• New front and rear 520 sprockets

Many riders choose to convert over from the stock 525 to a 520 chain. Besides being lighter and less expensive, a 520 chain is more readily available as well as having more sprocket size options.

• Steel Sprockets
• EK SRO6 O-Ring Chain (clip type master link)
• Smaller 3 hole retainer

This new and improved DOT kit includes LED headlight assembly with plug-and-play wiring harness, a specially designed adjustable steel mounting bracket, and all the required installation hardware. No cutting, no drilling, no wiring modifications! Installation takes 5 minutes.

We highly recommend this kit over the non-DOT and original DOT kit.  The low beam has extra punch and a proper beam pattern cut-off.  The high beam throws light far and wide.  It’s already a crowd favorite!

Two colors to choose from, Chrome or Black. Light output and beam pattern are the same for either color.

Low Beam: 20W, 2,800 Lumens
High Beam: 35W, 3,600 Lumens
Color Temperature: 6,000k
DOT & SAE Compliant
CE, RoHS, ISO9002, IP67

Please note: Fits '87-'07 (Gen 1) only

This kit includes the all new Morimoto 4×6 LED headlight and a pre-assembled JNS Engineering adjustable mounting bracket set. Like the rest of the JNS headlight kits, installation is a simple 5 minute plug-and-play procedure.

This is the best performing and highest quality headlight they currently offer. The low beam pattern is bright, very uniform/controlled, and features a proper upper cut-off. The high beam is amazingly bright, eliminating the need for auxiliary lighting (money saved!). Plus the 5,000K color temperature is extremely easy on the eyes. The materials, construction, and aesthetics are all top notch.

It’s a next level headlight, you won’t be disappointed.

Low Beam: 20W, 2,400 Lumens
High Beam: 35W, 4,300 Lumens
Color Temperature: 5,000k
DOT Compliant
Beam Pattern: Left Hand Drive

Does not fit '87 TW200 because that year has a unique AC powered headlight circuit.

This is a plug & play low profile LED light bar kit which includes laser cut stainless steel mounting brackets and high quality wire taps.

IMPORTANT: Must be used in conjunction with LED headlight or bulb that consumes no more than 35W.

  Please note that this product is not compatible with the 1987 TW200.

A nice place to mount auxiliary lights on your KLX where they will be high and easy to reach for adjustment but still tight to the cowlings. They will not interfere with controls, body work or the fuel tank.

Constructed of 1/8" stainless steel they are intended for LED lamps in the 2" range, but with a slight slotting of the mounting holes, will work great with 3" lights as well. Includes longer bolts to for the upper triple clamp mounts.

Made from heavy duty 1/8" thick stainless steel, these mounting brackets are specifically designed for mounting 2" LED auxiliary lamps to the front of your TW200. They position the lamps (not included) high & tight to the bike for optimal protection and light projection without interfering with the bike controls, body work, or fuel tank. Kit includes four longer mounting bolts for the lower triple clamp.

The image shows a GoPro camera on the TW's right side and an LED light on the left. You could certainly do something like that as well!

This heavy duty aluminum bracket is specifically designed for mounting auxiliary LED lights to the front of your XR650L without interfering with your large aftermarket fuel tank.  If your bike needs improved lighting this mount is the best place to start!

– 0.190″ 5052 Aluminum
– Laser cut
– CNC formed
– Powder coated black
– Includes stainless mounting hardware and JNS stickers.

LED auxiliary lights are sold separate.

This DR650 Oil Filter Guard is CNC machined from solid 6061 aluminum, black anodized, and then custom laser etched with our logo.

It fits over the fragile OEM magnesium cover and provides great impact protection in the event of a tip over.  Proudly made in the USA. 

Double the size of your side stand footprint and half the chances of your KLR tipping over when parked on soft terrain. This laser cut, TIG welded 0.190" thick slice of aluminum bolts to your machine with just the addition of a hole in the stock side stand pad. Just takes minutes to mount.

• CNC-machined for a perfect fitment
• Features adjustable settings to complement the lowering links

The IMS Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. 

They are the original Cast 17-4 Stainless steel pegs that revolutionized the foot peg market.

These pegs are 50mm(1.95") x 78mm(3.1"). 

The IMS Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. 

They are the original Cast 17-4 Stainless steel pegs that revolutionized the foot peg market.

These pegs are 50mm(1.95") x 78mm(3.1"). 

The new Fastway Evolution AIR foot pegs are now the ultimate pegs in the Universe.

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way.

Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

This is the ultimate adventure bike platform, it measures 2.25" wide, 4.75" long.

Patented adjustable collars make it easy to run them in the 'standard' or 'low boy' positions on most bikes.

Gain more room for bulky boots, or for longer legs. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. Kamber bolts lets you adjust the 'tilt' of your pegs to increase comfort, or to give better squeeze on your bike.

This guard is designed to protect your TW200 headlight from rocks, branches, and any road/trail debris kicked up by the vehicle in front of you.  It’s a one piece laser cut steel component with a sleek black powder coat finish.  Mounting hardware is included. 

Note: installation requires drilling two 1/4” holes in your plastic headlight fairing.

This skid plate is extremely strong, manufactured from a 5 mm aluminum bottom with 4 mm thick side walls, offering complete protection of the engine block. This unit is built with precision-manufactured mounts that fit directly into the existing frame mount, creating a robust connection that distributes the forces not only to the mounting points but also to the bike’s steel frame in case of ground contact. 8 mm strong rubber sliders also help to absorb and distribute impact forces. This unit completely replaces the wimpy stock plate constructed from just 2.5 mm material.

In addition to providing better protection and a sliding surface for impacts, this guard also offers better header and exhaust protection. Cutouts for both oil drain screws mean you don't have to remove it for changes. This plate is also compatible with Honda side stand as well as the SW-Motech Centerstand.

Provide absolute protection for your AT by including Crash Bars and the Skid Plate Extension, all made by the folks at SW Motech.

This unit is NOT compatible if with the optional shift lever on the DCT version.

Replace the wimpy stock DRZ400 Skid Plate made from 4mm thick 5083 aluminium plate. Strong and great looking. Leave the stock wings in place and give yourself something that will really stop any damage between the frame rails. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.

High quality aluminum caliper guards from Works Connection protects your brake caliper and looks great too.

For Straight 7/8" handlebar

Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.

Note: This kit includes the handguards only. Deflectors sold separate, can be added by selecting color from drop down menu.

For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.) 

Link lowers the rear of the bike by 7/8".

Comfortable at a stop or on technical trails.

Installation takes about one hour, and only a few minutes more to drop the forks in the front to match.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Kouba lowering link will lower the rear 1.75". Comes with bearings and seals installed for a quick and easy installation. Instructions included.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. Designed by Rick at Cogent Dynamics on his high-tech suspension dyno, then tested and endorsed by KLR owners all over, these units have been given the seal of approval by the ProCycle staff for both performance and ease of installation. No disassembly of your forks, no drilling of damper rods. Just change the oil over to 5w and install the units under the springs and hit the trails.

If you weigh up to 250 pounds, select the .64 spring kit. If you are over 250 or carry lots of luggage, please select the .70 spring kit. Please call if you have any further questions.

All of these kits include DDCs, springs, fork oil and preload spacers.

A dual-rate fork spring for the early KLR650. These springs start with a .40 kg/mm winding and after approximately 20% of the stroke, stiffen up to .60 kg/mm for the remainder of the travel. A very nice improvement over the stock springs which are .40 kg/mm for the entire travel.

Heavy duty shock bumper. The stock bumper is prone to disintegrating with age. If you are re-valving your shock it's a good idea to be sure the bumper is in good shape.

Don't want to buy a new shock? This rebuild makes the stock shock about 10 times better. Cogent Dynamics takes a stock DR650 shock, tears it down, cleans it up, adds a hard ceramic coating, then rebuilds it with a completely new Shock Shaft Assembly with rebound damping adjustment.

Any aftermarket spring for your stock shock will fit on this shock. If you are currently using the original spring, you will want to order a stiffer spring to go with your new shock. 

Our 7.5 kg/mm rear spring is 16% stiffer than the stock one and is perfect for the majority of riders. If you are a larger rider, or carry a lot of gear or a passenger (total weight exceeding 250 pounds) you will probably want the 8.3 kg/mm rear spring which is 28% stiffer than stock.

This shock includes the Bling Ring preload adjusting ring AND the Thrust Bearing! This replaces the two stock preload/lock rings. This ring is CNC machined aluminum with the additional thickness to provide superior support on the shock body.

Low shock also available. This option will lower your seat height 1" without the need for lowering links. All other features of this shock are the same as the stock height.

Complete kit of OEM quality parts to replace the bearings and seals in the swingarm pivot.

This cover acts as an "adjustable leak jet" to fine tune the accelerator pump squirt.

Eliminates "4-stroke bog" when used with correct jetting. Allows the use of correct carburetor settings to optimize performance, starting and reliability. Improved low-end performance with much better throttle response. Investment cast and finished to precise tolerances with internal high volume vertical check valve. Fits all motorcycles and ATVs using a Keihin FCR carb. Easy installation instructions (including online video) and template.

Buy both and save! Includes the Boyesen QuickShot 3 and Sunline Mixture Screw

Designed for use with stock engines using either stock or aftermarket exhaust and air filters.

• Provides a simple and affordable solution to carburetor tuning problems.
• Allows you to tune your bike for increased power and smoothness while retaining fuel economy.
• Includes a guide booklet on how to install and use your jet kit to its full potential.

• Includes all necessary parts to replace OEM-style fuel mixture screw with an extended screw for easy tuning
• Kit includes extended mixture screw, O-ring, spring and washer.
   

• Copper-colored release agent and lubrication for machine elements which are subjected to high thermal stress
• Makes dismantling easy after long running times
• Outstanding thermal resistance
• Resistant to acceleration forces
• Outstandingly adherent
• Resistant to hot water, salt water and splash water
• Long-term corrosion protection
• Prevents brake noise
• Protects from welding and seizing
• Operating temperature range: -31°F to 2012°F (-35°C to 1100°C) .
• 3.53 oz (100 g) tube

New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike. 

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.

ProCycle 425cc BIG BORE 88mm KIT With Cam Complete kit with 11:1 Wiseco piston (with rings, pin & clips), HotCams stage 1 performance camshaft and gaskets. No re-sleeving required. You will have to have your cylinder bored to fit the larger piston.

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

12mm Thread, 17mm Head.

Includes 2 drain plugs

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

12mm Thread, 17mm Head.

• Complete set of friction plates, steel plates, and springs
• Heavy-duty springs help prevent clutch slip
• Restores proper stack height, fixes clutch slip caused by wear and tear

This is an extended version of the stock DR650 clutch release arm that is manufactured by Suzuki.

Upgrading to a longer clutch release arm will lighten the pull of the clutch lever through means of increased leverage. This means less fatigue, quicker clutch engagement, easier clutch modulation and longer rides.

The extended clutch arm will not offer a drastic change in clutch pull. If you're looking for a major change in clutch pull at the lever, we recommend getting a Magura hydraulic clutch kit.

This is all you need to not only change your oil, but protect your motor as well. We include a magnetic drain plug in the standard kit, to help catch stray metal pieces, a 5-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.

Genuine Suzuki replacement gaskets.

Complete gasket kit includes all gaskets and oil seals necessary for rebuilding your engine.

If you already have a Quad Lock Case, you can Twist Lock and Go with any of these secure mounts.

Or Choose the Universal Adaptor to use your current phone case.

Planning a motorcycle trip can be hard work. Butler G1 Maps highlight the best paved motorcycle rides in the country so you don’t have to guess which roads are good. Their dedicated team rides and rates every road you see on the water-proof maps, hundreds of thousands of miles so far. Their easy to read rating system clearly indicates the most dramatic and scenic stretches and are accompanied by detailed inset boxes, written descriptions, elevation profiles and whole bunch of useful information to help you plan your journey.

Hot Shot Series Honda CDI Box; Rick's aftermarket Hot Shot CDI box has a hotter spark than OEM and retains the stock curve. It will replace OE# 30410-MN9-003 & 30410-MN9-000 and fit 1993-2021 XR650L. *CDI Boxes are not covered under the One Year Warranty.

• Most compact of lithium motorsports batteries available
• Ultra-lightweight and high-power
• Can hold a charge up to a year provided there are no “parasitic drains” (accessories that draw power when bike is off (i.e. alarms, ECUs, GPS, heated grips, etc)
• Large all-brass terminal design
• Can be installed in any orientation
• Antigravity batteries include a 3 year pro-rated, non-transferable warranty (registration of the battery with the manufacturer is required within 30 days of purchase by the retail customer). All warranties are to go back through Antigravity.
• Small Case format
• 4.375 x 2.37 x 3.75 inches (LxWxH)
• 240 Cranking Amps
• 11 Amp Hours (Pb Eq)/ 5.5Ah (Actual)/ 70.4Wh
• 1.56 lbs

These Rider's Wrenches by Fredette are combination wrenches that have three wrenches in one! A 2-stroke size spark plug wrench - a front axle and a rear axle wrench. Yep, all three in one unit.

Available in the combinations shown that will fit virtually all current dual-sport machines.

The MotoPressor is a compact pump unit that weighs only 1.3 pounds and fits in the palm of your hand! Measures 4"x3"x1.5"  This makes it smaller and easier to carry with you.

It includes a 8 inch long inflation hose, with a a low air loss chuck. You also get an SAE power cord that attaches to your battery and stays there, along with alligator clips with SAE connector. The Pocket Pump has an 6.5 foot power cord. All of this packs into a heavy duty neoprene pouch.

MotoPressor will inflate a 150/70/ R18 tire from 0-31psi in under 4 minutes, and is capable of pumping up to 130psi. It also features a built-in cooling fan to keep the pump at optimum operating temperature, and a check valve to check the psi by attaching your tire gauge to this valve.

MotoPressor Tire Gauge comes with two chucks. A straight chuck for "easy to get at" valve stems PLUS a 45° chuck for those "not so easy to get at" valve stems. 

We all know what a pain fuel Station gauges are. Most are woefully inaccurate and impossible to get onto a motorcycle valve stem. Enter the MotoPressor Tire Gauge…simply attach the MotoPressor Tire Gauge to your valve stem, attach the fuel station chuck to the inline fitting on the gauge and get an instant and accurate reading in PSI or KPA. 

No need to switch between the gauge and air compressor hose! Added a little too much air to your tire? Simply press the air bleed button and adjust to your desired pressure. 

NOTE: When swapping out the chuck, use plumbers tape on the hose thread. Wrap the thread, in a clockwise direction with 3 - 5 wraps of plumbers tape. Screw on the new chuck and tighten. Failure to follow these instructions will result in air leak! 

MotoPressor Tire Gauge comes with a one year limited product warranty. 

Specifications: 

• Measures PSI or KPA 
• 0-60 PSI/0-4.2 KPA read out 
• 50mm (2”) analogue dial 
• 300mm (12”) Braided flex hose 
• Push button air bleed valve 
• Protective rubber gauge guard 
• Self-locking air chuck PLUS A SECOND 45° chuck for those hard to get to, valves 
• Can be used in-line with a compressor

Protect your wheels from scratches and dings caused by tire changing tools.

• Includes retrieval cord for easy use
• Sold in pairs

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX300 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Rear rack only, no Rotopax mount or side racks included.

• Smartly designed to accommodate, but not limited to: 1 gal. - 1.75 gal. Rotopax fuel/water packs, Wolfman Luggage - Wolf Tail bag (M303), and Givi Monokey top cases (separate mounting kit required)
• Large 14.5"(Width) X 13"(Length) luggage platform
• CNC laser cut from 1/4" 5052 Aluminum - weighing only 2lbs. 10oz.
• Each rack is sand-blasted and sprayed with a premium DuPont semi-gloss mini-tex powder-coat finish
• Stainless hardware kit and installation instructions included
• All materials and craftsmanship are sourced 100% in the USA
• Carrying capacity is 20lbs.

You can add the double D ring loop to any 1" flat webbing system. This simple piece adds a lot of flexibility to any luggage system you are using. Instantly and easily create a mount point or adjustment point on almost anything. Double D Rings can be used as a secondary buckle and works the same way as a helmet strap. However, the double D rings should NOT be used as a primary means of securing luggage.

Available in 6 colors.

CONSTRUCTION FEATURES

• (2) Heavy Duty 1" Metal D Rings
• 1" Flat Nylon Webbing

The glove box for your motorcycle! The Zigzag handlebar bag is their smallest bag yet also one of their most popular. Sometimes you only need the basics like your wallet, phone, registration, and other small items, and no matter what you’re riding, the Zigzag handlebar bag delivers quick and easy access to the basics.

• VOLUME: 1.5 liters (92 cubic inches)
• DIMENSIONS: 10.5” L x 2.5” W x 4” H (27 cm L x 6 cm W x 10 cm H).
• MATERIALS: Rugged Bomb Shell™ vinyl coated fabric, and Mil-spec materials and hardware.

Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

Includes 2 drain plugs

A 10-pack of drain plug sealing crush washers. Soft tempered aluminum drain plug crush washers designed to seal in fluids

Replace your sealing washer at every oil change to prevent a leak.

Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

For the frame drain on your XR650L ,extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

Extra protection for your motor. A strong magnet at the end of the plug picks up metallic flakes in your oil.

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. Get a fresh one now to ease installation of your new performance muffler.

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust. 

Kit includes two gaskets.

This is the gasket used between the header pipe and the stock muffler. This gasket is not needed for aftermarket mufflers!

The Yoshimura RS-4 is a proven choice to improve the performance and sound of the Africa Twin.

Removing the stock muffler saves over 4 pounds and makes the 988cc parallel twin engine growl!

• Oval-ellipse shaped sleeve
• Yoshimura's Works Finish for increased durability & adventure friendly design
• Features an integrated inlet heat shield design for a seamless transition with the stock heat shield

The Akrapovic double-flow muffler is made of a Titanium outer shell with a Stainless Steel end cap. The joint on the inlet cap is CNC milled and connected to the inlet pipe with silicon-shielded tempered springs. A lightweight, compact and high-temperature-resistant carbon fiber clamp supports the muffler to the frame.

This muffler is 3 pounds lighter than stock and will give you an increase in power across the powerband.

The plug-and-play exhaust is simple to install without any need for remapping and comes with full instructions.

Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.

The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.

Optional Heat Shield Strip will protect your airbox from the close proximity of the hot head pipe.

This kit will replace both of your stock corroded or rusty header bolts with studs. 

Just remove the stock bolts and thread in these studs in using a 4mm hex key up to the peened mark in the threads. 

It is recommended to use anti-seize on the external threads and torque the nuts to 14 ft/lb using a 10mm 12 point socket.

Our very own high flowing head-pipe is made in the USA using a CNC (computer numerically controlled) mandrel bender for an absolute perfect fit. It is a high quality 2-piece 18 gauge stainless steel head-pipe with 1 3/4" outer diameter, compared to the stock outer diameter of 1 1/2".

The SS Pro-Flow is a tested upgrade over stock that will bolt right on with no modifications needed. It is compatible with any combination muffler/mid-pipe, as well as all motor configurations of the DR650 '96-current.

Includes a stainless steel band clamp for the mid-pipe joint, clamp-on heat shield mounts, to use with stock heat heat shield and a stainless steel flange at the exhaust port mount. We recommend a new exhaust gasket when installing your new SS Pro-Flow.

The genuine factory shop service and repair manual. This is the reference manual Honda dealers use in their service departments. It has all the necessary info to do maintenance or repairs to your Africa Twin CRF1000L.

• Increased tank 25L / 6.6 Gallons.
• Impact and abrasion-resistant.
• Lighter than the original in steel.
• Ideal for both tourism and competition.
• Designed to maintain a narrow profile to ensure an excellent fit.
• Compatible with tubular engine guards/fairings.
• Perfectly compatible with the original pump and level switch.
• Possibility to assemble Quick Fill cap.
• E800033Z approved for use on EU road.
• Compatible with E5 E10 petrol.

Included with the tank:

• Acerbis cap
• Vent pipe
• Assembly kit

Get better range from your early KLR650 by adding an IMS 6.6 gallon fuel tank. The big tank also provides radiator protection.

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with POLYETHYLENE CROSSLINK for extra strength and durability.

Natural color is recommended if you wish to easily see the fuel level in the tank.

This tank requires you to re-use your stock petcock valve. Does Not Use OEM/Stock Shrouds

Does your stock vacuum operated petcock not shut off when your bike is parked? Replace your stock vacuum operated petcock with this manual one. Must be shut off any time the bike is parked for more than a few hours. Fits stock or aftermarket tanks. 

Aftermarket plastic tanks might need the hole cut into an oval shape to fit the two standpipes.

Replacement side panels from ProCycle (formerly DSA). These pieces are fully compatible in any combination with the original factory plastic. These side panels have a crisper, more angular look than stock. Vacuum molded, they are a design improvement over the stock panels.

Sold in pairs
Does not include heat shield. Depending on your application and preferences, more than one optional heat shield may be useful.

The Rally windscreen from Parabellum is the perfect protection from wind and debris without sacrificing technical off-road capabilities. This is an upright rally type windscreen that looks aggressive and performs well under all types of riding. Designed primarily for the off-road / dualsport enthusiast, this shield keeps pressure off the rider's chest while commuting from home to adventure and back.

This windscreen mounts securely to the three stock windshield holes as well as the two side cowling mounts. The shield is 14 inches tall, 13 inches wide at the bottom narrowing to 11 inches at the top. Made from 3/16" military aircraft grade cast acrylic.

Made from strong and light 5052 aluminum to hold your license plate firm and up, out of the way for maximum tire clearance, prefect for your new dual sport bike.

It uses the original tag light with out any modifications to your bike. Mounting hardware and instructions included.

The easy way to lubricate the cables on your motorcycle. Lubricates completely in five seconds!

Features:

• Prevents throttle freeze or hang up
• Specially formulated to stay fluid to -70°F
• Ideal for lubricating cables on motorcycles, PWCs, snowmobiles and other vehicles
• Lubricates and rustproofs all moving parts
• Available in 6.25-ounce aerosol can

A super compact shovel with several bonus features!

• Lifetime Warranty
• Compact and Portable Design
• Integrated Survival Features
• Durable and Versatile Cosntruction
• Hidden Tools Threaded in the Handles

Nitro Tape is a self-fusing silicone tape that's easy to remove with no residue.

It is waterproof, stretches up to 300%, has a temperature range from -65° to 500°F and insulates 8,000 volts per layer.

It resists UV, salt and corrosive chemicals.

20 mil thick, 1" wide by 10' long.

If you've split a radiator hose, this can help. A 'must have' for all tool kits.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

High Quality Replacement Wheel Bearings and Seals for your TW200.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Includes all wheel bearings, new dust seals. The rear kit includes the bearing and seal for the cush drive hub (sprocket carrier). All bearings are sealed on both sides.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

A stock replacement brake pedal for the DR650. Nothing fancy but sure gets the job done. Just order it up and get back on the trail. See our Brake Pedal Adjuster Bracket that allows you to adjust the position of your brake pedal to perfection.

Genuine Suzuki replacement brake and clutch levers. Standard length. 

Available as a set or individual.

Please notice that this set is for '10-current DR650.

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

Motion Factory Racing patented Flex-Mount Footpeg System provides superior grip and allows your foot to flex forward and back with the movement or your motorcycle.

One of the key features of Flex-Mount Footpegs is their unique flex-mount design. This design allows the footpegs to absorb shocks and vibrations, reducing fatigue and improving overall comfort during long rides. Additionally, the adjustable height and angle options ensure a personalized fit, allowing you to find the perfect riding position for maximum control and stability.

The bushings act like the suspension on your bike. With bushings, there are a couple of things to think about. The more firm the bushing the more durable and longer it will last. They use a durometer, a hardness scale 0 being the softest and 100 being the hardest. They don't go below a80 because they found that durability isn't great below this but have tested as low as a60 bushings. A bigger person that rides enduro-style terrain might want an a96 or a98 rated bushing. A lighter person might want the opposite but in the end, it comes down to personal preference. 

They put an a90 bushing on all new mount setups so people can get a good feel for their mid range option. The bushings are high quality yet inexpensive (they achieve this because they use skateboard bushings that are already developed and produced in massive quantities around the world) and a wear item designed to be replaced each season or depending on how hard or often someone rides.  

Complete mount system includes: 

• 6061 Aluminum ADV Platforms (65mm wide x 107mm length) 
• Stainless steel mounts
• Sleeve bearing (8x10x20mm) included for 8mm OD' footpeg pins. 
• Right and Left spring included. 
• Chromoly steel spindles with reusable thread locker. 14mm wrench. Torque spec 40 ft/lbs 
• A90 (medium flex) rated bushings
• Cleats and stainless steel machine screws. M3x18mm. These can simply be replaced by going to your local hardware store when damaged or worn out. 
• Bushing bolts. 8mm Allen wrench. Torque spec 30 ft/lbs

 They designed their hardware to bend rather than break in a significant impact. A wrench or adjustable wrench will quickly and easily bend the bolt back straight. Please avoid using a hammer. A little leverage from a long-handled wrench or pipe will do the job. The whole system is rebuild-able and serviceable.

They Fit Kawasaki KLX110 and Yamaha TW200 however some of these bikes may need a little modification by yourself, Please check the size carefully before you buy. If you make mods to the footpegs for fitments it will void all warranties and return policies. 

Heidenau tires are made in Germany and they are high quality motorcycle tires for street, off road and adventure riding.

A tire worthy of standing side by side with the legendary K60 Scout. The K60 Ranger is designed and developed to be the off-road cousin in the K60 family. This is not a Scout with different tread. Heidenau started from scratch with entirely new carcass and compound to maximize off-road performance and reliability.

“Rated by Heidenau as a 30% street / 70% off-road tire, the new K60 Ranger sits next to the K60 Scout in Heidenau’s lineup, offering a more off-road biased design to help adventure riders explore further into the backwoods with more confidence to tackle difficult terrain. Like the Scout, the K60 Ranger also gets a reinforced carcass with high puncture resistance. Where it differs is a more-open, knobby tread pattern that utilizes large gaps between center blocks, instead of a continuous center strip, giving it the ability to dig into loose terrain more effectively. What’s more, the Ranger utilizes a softer rubber compound that helps increase grip both off-road and on the street. Plus alternating side lugs, tied together with crossbars, enhance the tires ability to climb out of ruts and improve cornering stability.” – Rob Dabney - ADV Pulse

Tread design:

The K60 Ranger’s new tread design has dirt and big bikes in mind. While the open block design should keep the tread from loading-up in muddy conditions, the compound and carcass should keep the ride stable when you’re back on the street. With features intended to give integrity to the side blocks, the K60 Ranger should be at home on single track or cruising down the highway.

Tubeless tires (TL) can be used with spoke wheels, but Tube Type (TT) tires cannot be used with TL wheels.

Designed specifically for Dirt Drack racing for mini racers. Tread design can be customized to meet each rider's needs to provide superb traction and stability on any race track.

120/70-17

Not DOT approved for street or highway use!