- Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
- Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
- Triple-lip seal design
- Dyno-tested to last 3 to 4 times longer than OEM seals
- Directional ribs allow seal to be installed easily
- Kit includes fork seals and dust wipers
Chain Size: | Front Sprocket: | Rear Sprocket: | Front Tire: | Rear Tire: | Spark Plug: |
520x104 | 14T | 37T | 110/70-17 | 130/70-17 | CR8E |
Suspension
Complete high quality kit to replace the bearings and seals in the KLX shock linkage. Includes the lower shock bearing.
Kit Contents: | |
---|---|
Washer | 4 |
Seal | 8 |
Needle Bearing Shaft | 4 |
Needle Bearing | 7 |
Lowers the rear suspension. Precision machined from billet aluminum and anodized.
*Important when lowering the rear suspension you want to raise the fork tubes in the clamps an equal amount of inches that the rear is being lowered. That way your bike will sit level when done.
Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.
1994 - Current: KLX250 | 1.25" |
1994 - 2019: KLX300 | 1.25" |
2020 - Current KLX300/ 300SM | 1.00" |
Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.
The three forces of suspension, testing procedures, even the black arts of chassis geometry: This explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.
- Extracts dirt and debris trapped between fork seal and tube
- Easy way to keep fork seals clean and debris free
- Works on conventional and upside-down forks
Showa removed the schrader valve on many newer rear shocks. Now you need a needle to recharge your shock with nitrogen after a rebuild. Race Tech built this unit just for that job.
The features of this tool include 300 psi capacity, bleeder valve and T-handle plunger pin chuck. Swivel chuck has a 12" flexible hose. Comes complete with instructions, carrying box and Schrader valve extension (required on some Showa shocks). Nitrogen bottles available at any welding supply house.