Luggage

ADV Sushi is a webbing reinforced velcro strap with integrated daisy loops. These are as handy as zip ties and duct tape. This is one of those products that you will use frequently if you have them with you.

A single strap was load tested at 200 pounds before it let go and a single strap held 50 pounds overnight with no issues.

Use this kit to build your custom solutions such as a fuel bottle holster, spare tube carrier, or use them to attach your bags to your Uprising Soft Rack. The possibilities are truly endless.

This Kit Includes:

• (4) 17.5" reinforced velcro straps.

The Bag Snake kit works great for rear bags and side bags. When rigged with a side bag the second ring on the ring tensioner creates a secondary buckle so you can loosen the top for access and your bag doesn't fall away from the bike.

When rigged for a rear bag the diagonal section of the strap prevents any slippage over the ends of the bag. For this reason, the Bag Snake is great for smaller rear bags.

Kit Includes:

• 1 Heavy Duty Cam Tension Loop
• 1 Heavy Duty Metal Ring Tension Loop
• 1 Six Foot Runner Loop
• 1 Heavy Duty Metal Ring Loop

The GCAG Bottle Holster is designed to support many different bottles. The Bottle Holster can attach to their Uprising Soft Rack, Hardcore Soft Rack, or anything you can get the straps around. This is an easy and convenient method to carry extra liquids.

The Following bottles have been tested and verified:

• 1 Liter fuel bottles such as Primus, MSR, and Optimus
• 1.5 Liter fuel bottles from Primus
• 1 liter Nalgene bottles
• 40oz Thermoflask water bottle

Any bottle with a circumference of 11.5" or less will fit.

Features:

• Four straps that can easily go around any mount point.
• Top strap to run through any slotted cap to prevent the bottle from coming out.
• Pull string with keeper in the top to keep shorter bottles and bottles without a slotted cap from coming out.
• Made from 1000D Cordura. 

Fuel range and water storage is a concern of every adventurer. Easily carry 2l fuel or water bottles measuring 6”x8.5”x3.5” with the OBR ADV Gear Bottle Holster. The OBR ADV Gear Bottle Holster is a versatile solution to carrying 2l fuel/water bottles anywhere on your luggage kit utilizing existing luggage straps via a series of web loops.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• Velcro Back Plate allows for hard mounting using self-sourced appropriate hardware
• SRB buckle strap secures bottles by creating a closed loop over bottle 
• Fits bottles measuring 6”x8.5”x3.5”

* Fuel bottle not included

Fuel range and water storage is a concern of every adventurer. Easily carry 1l to 1.5l fuel or water bottles with the OBR ADV Gear Bottle Wrap. The OBR ADV Gear Bottle Wrap is a versatile solution to carry varying sizes of fuel/water bottles anywhere on your luggage kit. The OBR ADV Gear Bottle Wrap is a basic wrap panel with a series of web loops that allows secure fuel/water bottle attachment via your existing luggage straps.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• External reflective webbing 
• Adjustable side buckles to perfectly adjust to varying bottle diameters
• SRB Buckle strap secures bottles by looping through bottle caps and under bottle base
• Fits bottle diameters ranging from 2.5” to 4”

* Fuel bottle not included

Add a ProCycle Thermal Tumbler for a great value here.

Giant Loop is aiming for smaller, lighter security in the form of its new compact Quick Loop Cables, available in 36- and 84-inch lengths. These cables roll up into a compact coil with an included hook-and-loop strap for easy storage. Both of these cables weigh under 6 ounces. A bright orange vinyl cable sheath not only protects the bike's finish from scratches, but it also provides high-visibility that, according to Giant Loop, is for "discouraging the opportunistic grab-and-dash thief to move on to an easier target."

The 84-inch cable integrates with Giant Loop's Great Basin Saddlebag and Siskiyou Panniers and other large bags which feature cable pass-throughs so riders can secure their luggage to a parked motorcycle. The 36-inch cable is more suited to locking a helmet or riding jacket to motorcycles. These cables do not include a lock.

You can add this cam buckle loop to any 1" flat webbing system and have an instant secure way to tighten your load.

Available in 6 colors.

CONSTRUCTION FEATURES

• Heavy Duty Cam Buckle rated for 2000 pound load capacity
• 1" Flat Nylon webbing

The tension system integrated in this loop is a Green Chile innovation. Their elastics are custom woven inside tubular nylon webbing. This gives you all of the advantages of adding tension to a strap while maintaining the full strength of nylon webbing. You can add their cam buckle tension loop to any 1" flat webbing system and have an instant upgrade. 

CONSTRUCTION FEATURES

• Heavy Duty Cam Buckle rated for 2000 pound load capacity
• Heavy Duty Rectangle Ring to assist in managing slack in the webbing
• Climb-spec tubular nylon webbing body

Patent Pending

This bundle includes everything needed to attach dry bags or duffels to your panniers while adding the convenience of a pannier carry handle.

The Bag Snake is the perfect system to attach a dry bag or duffel to your panniers and the minimalistic design of the pannier handle means it can stay installed and never be in the way!

*Note: Most pannier mounting points can easily accommodate the Bag Snake. However, panniers such as Trax brand and the OEM Suzuki V-Strom panniers have low clearance mount points. For these style panniers you will need to add the optional low profile ring loops.

Features:

• 1" Tubular climb-spec nylon webbing for the handles
• 1" Heavy Duty Nylon Webbing and Metal hardware for attachment.
• Heavy Duty cam buckles with the Bag Snakes to keep your luggage secure.
• Cam and Ring Tensioners with the Bag Snakes to hold your luggage firm while riding.

Bundle Includes:

• 2 Soft Pannier Handles
• 2 Bag Snake Kits
• Optional: 8 Low Profile Ring Loops for panniers with low clearance brackets.

Extend your storage options with OBR ADV Gear Crash Bar Storage Bags. The Crash Bar Storage Bag attaches to your motorcycles lower crash bars via a series of one wrap Velcro tabs. Each bag is constructed from extremely durable Ballistic Nylon material and heavy duty #10 zippers. Great for storing tire repair tools, chain lube and/or fuel stabilizer, spare tube, rain gear, etc. Helps to keep weight low and out of the way of the rider.

Features

• High strength, abrasion and water resistant ballistic nylon construction
• Heavy duty  #10 coil zippers with storm flap
• Secure attachment to your bikes crash bars using strong one wrap Velcro
• Spacious 6x10x3 compartment  
• Outside reflective web for increased visibility
• Fits bar spreads up to 10”
• Sold as a pair

You can add the double D ring loop to any 1" flat webbing system. This simple piece adds a lot of flexibility to any luggage system you are using. Instantly and easily create a mount point or adjustment point on almost anything. Double D Rings can be used as a secondary buckle and works the same way as a helmet strap. However, the double D rings should NOT be used as a primary means of securing luggage.

Available in 6 colors.

CONSTRUCTION FEATURES

• (2) Heavy Duty 1" Metal D Rings
• 1" Flat Nylon Webbing

100% Waterproof! Saddlebag Dry Pods update Giant Loop’s Great Basin Saddlebag and Coyote Saddlebag, replacing the Great Basin Dry Pods and Coyote Dry Pods.

Keep gear organized and dry with this set of 3 roll-top inner liner Saddlebag Dry Pods, featuring RF welded seams and air purge valves that make it easy to compress gear by squeezing air out of the sealed Dry Pods. Specifically designed to fit inside every version of both the Great Basin Saddlebag and Coyote Saddlebag – as well as the new Great Basin Saddlebag Roll Top and Coyote Saddlebag Roll Top – Giant Loop’s Saddlebag Dry Pods also can be used anywhere you need high-quality, lightweight dry storage.

Includes two side Pods and one double-ended center Pod. Backed by a Limited Lifetime Warranty against defects.

“Extras” are a common factor before and during any adventure. “Extras” are defined as items that either lose their organized place or are simply acquired during a trip. The OBR ADV Gear Extras Pouch is the perfect solution for these miscellaneous items. The OBR ADV Gear Extras Pouch helps to keep these items within easy reach as standard storage that needs to be accessible during the day or as simple overflow.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• Heavy duty #10 coil zipper that won’t jam up in the dust
• Protective foam padded bottom 
• External reflective webbing with universal Molle loops
• Base webbing loops as alternate attachment option
• Pouch dimensions 6” x 14” x 3.5”
• Attach to existing soft luggage or as a top lid pouch for hard side cases

Secure storage of a spare tube, tire irons, or random miscellaneous items is a must for any trail ride or adventure. The OBR ADV Gear Fender Bag is constructed from a heavy duty industrial grade ballistic fabric that secures tightly to any fender via oversized heavy duty gutter hooks. The OBR ADV Gear Fender Bag also utilizes an optional double button snap system that when used eliminates any potential for shifting of the fender bag when riding off road or over rough terrain.

Features

• Heavy Duty industrial grade material construction with high strength UV resistant nylon webbing
• Heavy duty dust resistant #10 coil zipper with cover flap 
• Secure attachment with oversized heavy duty gutter hooks
• Optional secondary button snap retainment system
• Sized to fit most HD 18” or 21” tubes

Flats never occur next to a green grassy field with daisy’s … it always happens way out in the bush and in the dirt and weeds. Change your flat on a clean surface protecting your hubs and bearings from picking up unnecessary dirt and debris with the OBR ADV Gear Flat Mat. Our 24” x 24” Flat Mat provides you a clean area to set your wheel onto while also having convenient slip pockets to stash those easy to loose bits and parts that you removed during the flat repair.

Features

• Heavy duty industrial material construction
• Slip pockets to keep those loose parts and tools close by
• Reinforced center panel to set your hub onto
• Folds flat for easy storage within your luggage

The Chilly Exhaust Heat Shield is the most effective heat shield on the market. The innovative three piece design consists of a top shield attached to 2 rails with rivets and spacers. This reduces the contact area and slows down heat transfer. They have incorporated a patented, insulated reflective blanket on the underside of the shield to reduce radiant heat transfer. The included stainless steel clamp makes it simple to install.

We highly recommend a heat shield if you run soft luggage without hard racks.

FEATURES:

• Solid Top Shield - The logo is laser etched and there are no cutouts on the top shield. This prevents radiant heat from passing straight through to your luggage.
• Side Rails - By isolating these with spacers the heat conductive surface area to the top shield is reduced and slows down heat transfer.
• Radiant Heat Shielding - The reflective insulated blanket on the bottom of the shield is the real hero. This patented material won't be found anywhere else in the motorcycle industry. 
• Stainless Steel Clamp - Slots have been provided in the side rails to make installing as easy as it gets.
• Brushed Aluminum - Lightweight and looks nice.

DIMENSIONS:

• Length 7.5" (190mm) x Width 3.5" (76mm) x Height 1" (25mm)
• Clamp fits any exhaust 3.5" - 5.5" (89mm - 149mm)

Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.

The ProCycle rack system is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

See the linked instructions for how-to videos.

The ProCycle rack system is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.

Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Multiple mounting points for various luggage and strap options. Top rack includes a mounting point for a rotopax mount (not included). Side panel guards keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.

Top rack is 15in wide by 11in from front to back.

This set includes the ProCycle Top Rack, Side Panel Guards, and sub frame bracket:

The Mondo UL Kit is the next evolution of the GCAG product line. The "UL" stands for Ultralight. They have designed these straps to be light and rugged.

FEATURES:

• GCAG Tensioner - Their tensioner is designed to keep your luggage tight even while traveling. The GCAG tensioner is designed with heavy duty elastic running inside 1" tubular climb-spec webbing. This allows the load to transfer from the elastic to the webbing prolonging the life of the strap and providing a fail safe to the elastic you will not find in other brands.
• Mil-Spec Quick Release Buckle - These buckles are convenient, but most importantly, they are tough! Proven in combat, they can certainly handle the rigors of adventure. They use buckles that can be replaced with no sewing required. You could easily keep a spare in your pocket.
• Integrated Slack Management - They have utilized another mil-spec product called a Web Dominator to manage the slack on the Mondo UL straps. Roll your slack and secure it with the built in shock cord. Minor length adjustments can be made without undoing your slack manger.

The Mondo UL Kit has been designed to work with or without their soft racks. These straps allow you to use any bag you want for luggage. When installed properly you will be able to thrash about offroad and your luggage will stay put!

To use the Mondo UL Straps make a girth hitch around any mount point on your bike. Next, snap the buckles together and pull it tight. The Mondo UL straps are easy on and easy off.

MONDO UL KIT INCLUDES:

• 2 Mondo UL Tension Loops
• 2 Mondo UL Runner Loops
• 2 Web Dominators for slack management

Mondo Straps are named after the classic motorcycle movie, "Mondo Enduro". When they set out on their world trip they had hard luggage on their bikes. By the end of the movie the riders that were still pushing forward were all using simple straps and some homemade dry bags. The simple fact is soft luggage is more durable off road than hard luggage.

The Mondo Straps Kit has been designed to work with or without their Uprising Soft Rack. These straps allow you to use any bag you want for luggage. When installed properly you will be able to thrash about offroad and your luggage will stay put!

To use the Mondo Straps make a girth hitch around any mount point on your bike. Next, thread the flat runner back through the heavy duty metal cam buckle and pull it tight. The Mondo straps are easy on and easy off. The integrated tensioner system will keep your luggage in place no matter what terrain your adventure takes you on!

Kit Includes:

• 2 Heavy Duty Cam Buckle Tension Loops
• 2 Four Foot Runner Loops

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go. The Moto Caddy is really two containers in one - the longer side is 4 inches long, good for your paperwork, while the other end has a 1 inch depth, perfect for some emergency coins!

With 3.5-liters of pack-able volume, the super-rugged, universal roll-top Possibles Pouch™ provides enough capacity to carry a set of tire irons, spare tube, compressor, tools, and other small offroad essentials. The bag also allows one to add external pockets to Giant Loop’s MoJavi Saddlebag, Coyote Saddlebag, Great Basin Saddlebag, and MotoTrekk Panniers.

The Possibles Pouch gear pocket is 100% waterproof, dustproof, and mudproof. It can be anchored to engine guards, crash bars, tail racks, or any other secure attachment point on virtually any motorcycle make or model. Add Giant Loop’s bolt-on Tail Rack for an instant trail riding solution that gets the weight off your body and onto the bike for improved performance and less fatigue.

• VOLUME: 3.5 liters (214 cubic inches)
• DIMENSIONS: 10.5” L x 5.5” W x 3.0” H (27 cm L x 14 cm W x 8 cm H).
• MATERIALS: Rugged Bomb Shell™ 500D PVC tarpaulin body.

Construction Features:

• Heavy Duty 1" Metal Ring
• Heavy Duty 1" Nylon Webbing
• Available in multiple colors
• Thin Black option is made of their lightweight webbing for low profile pannier brackets.

The tension system integrated in this loop is a Green Chile innovation. You can add the ring tension loop to any 1" flat webbing system and have an instant upgrade. Even if you wear out the elastic in this loop it will not fail.

SPECIFICATIONS

• Heavy Duty 1" Metal Ring
• Heavy Duty Rectangle Ring to assist in managing slack in the webbing
• Climb-spec tubular nylon webbing body

The simplest piece they make, in a 3, 4, 6, 9, 12 or 15 foot length. This is the runner they use on the bag snake and the side bag haulers.

This piece can be added into any luggage hauling scheme you can dream up.

SPECIFICATIONS:

Construction is a simple piece of 1" Nylon webbing with a loop sewn into one end.

They use the 4 foot length in the side bag hauler kits and the 6 foot length in the bag snake kits.

Giant Loop has removed the zipper in the Coyote Saddle bags, and now it is a true roll-top bag. This bag straps on to dirt bikes and dual sport motorcycles, no passenger pegs or racks required. Saddlebag rides on rear fender and/or tail rack.

• Includes 3 Dry Pods equipped with air release valves
• Includes a Hot Springs Heat Shield
• Military-spec materials and construction
• Limited Lifetme Warranty against defects
• Capacity: 39 Liters

The Great Basin Saddlebag by Giant Loop is the largest member (now 68 liters!) of the Giant Loop family of rackless luggage. It has been updated with a roll-top making it much easier to get in and out of. Designed specifically for bikes equipped with passenger pegs, no racks required.

• Includes 3 Dry Pods equipped with air release valves
• Includes a Hot Springs Heat Shield
• Separate mounting and compression straps for easier gear access
• Military-spec materials and construction
• Limited Lifetme Warranty against defects

Their lightest and slimmest setup for carrying essentials on aggressive off-road rides. This saddlebag is ideal for carrying inner tubes, tools, fluids, snacks and other trail riding necessities. Allow the Mojavi to transfer the weight from your backpack to your motorcycle for improved rider endurance and comfort. Resistant to water, mud, snow, and dust. Straps on and stays on – no matter what.

• Fully-waterproof roll top design.
• Mounts without drilling. No hardware required
• Anchors to rear fender or Giant Loop Tail Rack.
• Bomb Shell™ construction and materials.
• Includes Hot Springs Heat Shield™ to Prevent exhaust from melting saddlebag or side panels
• Multiple mounting options with included Pronghorn Straps and fender hooks.

The MoJavi is designed to mount behind the seat directly to the fender or to a GL Tail Rack, but can also be positioned according to personal preference. Once positioned in the desired location, the saddlebag is secured to the fender or GL Tail Rack using the two included fender hooks and Pronghorn Strap. After mounting the saddlebag to the fender or GL Tail Rack, two side mount straps secure the MoJavi directly to the subframe or frame and hold the saddlebag firmly in place.

Optional GL Mounts allow one to secure the saddlebag to existing bolt-mounted points to keep straps away from hot exhaust components. An included Hot Springs Heat Shield prevents the MoJavi Saddlebag or side panels from making direct contact with exhaust components.

Specifications:

• VOLUME: 12 liters (732 cubic inches), comprised of two 6-liter side pockets.
• DRY WEIGHT: 3 lb. (1.4 kg), with all included components.
• DIMENSIONS: Two (2) side pockets, 4″ deep x 16″ long x 7″ wide (10 cm deep x 41 cm long x 18 cm wide).
• MATERIALS: Rugged Bomb Shell™ construction and materials, and military-spec fasteners. Aluminum thumb buckle compression straps. Highly abrasion-resistant webbing. Coated Fender Hooks. Stretch polyurethane Pronghorn Strap. Aluminum Hot Springs Heat Shield.

MotoTrekk Panniers (sold as a set of two) are slim, rugged, dry bag-inspired panniers sized for overnight or multi-day trips. Made of welded waterproof fabric and featuring a roll-top closure, contents stay dry and dirt free. In addition, their integrated mounting system enables them to strap to virtually any motorcycle side luggage racks (with or without GL Pannier Mounts), working well for both on- and off-road adventures.

Other rider-friendly features include lash loops to secure waterproof roll-top Possibles Pouches™ to the front and back of the panniers for expanded storage capacity, and quick-connect magnetic buckles to facilitate easy mounting and removal—even when packed.

• VOLUME: 50 liters (3,050 cubic inches) (25 liters per side)
• DIMENSIONS:12″ W at top, 9″ W at bottom, x 15″ H x 7″ D (30 cm W (top) / 23 cm W (bottom) x 38 cm H x 18 cm D)
• WEIGHT:  6 lb. (2.7 kg.); or 10.4 lb. (4.7 kg) with optional GL Pannier Mounts and hardware
• MATERIALS:  Rugged Bomb Shell™ coated fabric construction with radio-frequency (RF) welded seams; heavy-duty fasteners including aluminum hooks and magnetic quick-release buckles.

Pair MotoTrekk Panniers with GL Pannier Mounts for the ultimate in lockable, quick-mount, quick-release convenience.

Siskiyou Panniers combine the convenience of top-loading hard panniers with the performance benefits of Giant Loop’s world-travelled soft luggage. Constructed with flexible, impact-resistant, and waterproof materials, Siskiyou Panniers deliver the ultimate lightweight, rugged, and compressible gear packing solution for on- and off-road motorcycle adventures. Choose the Siskiyou Panniers for multi-day rides when quick, top-loading gear access is a priority.

• Top loading for easy access to 70 liters of storage, including mesh pockets under lids.
• Capacity: 35 Liters per side
• Includes two removable waterproof inner liner Dry Pods™ for 100% waterproof performance in all conditions.
• Adjustable design is compatible with an array of side luggage racks — and they can be mounted without racks on some motorcycles.
• Designed by riders and built for the long haul with rugged yet lightweight materials (weighs just 10 lbs with all included components).
• Multiple attachment points secure additional dry bags and gear.
• Includes two Hot Springs Heat Shield™ kits for rackless mounting on compatible motorcycles.

Quick day trips often necessitate the need for additional gear storage … the OBR ADV Gear Enduro Saddlebag answers this need with a creative downscaled design of the OBR ADV Gear Adventure Saddlebag. The OBR ADV Gear Enduro Saddlebag maintains the same fit and function keeping the load in close to the bike and forward for improved handling. OBR ADV Gears 10l Enduro Saddlebags are a great solution for packing extra tools, rain gear, or even overnight gear for those with minimalist needs.

Features

• 600in3 (10L) Capacity
• Heavy duty ballistic nylon construction with high strength UV resistant nylon webbing
• Heavy duty #10 dust resistant coil zipper with storm flap
• Padded inside/outside panels to protect bike and gear
• One size fits all design with adjustable seat cradle straps
• Versatile quick On/Off
• Generous use of reflective Side webbing for increased low light visibility
• Versatile Molle Loops for added tie down and attachment points
• Includes 1 ea. rear anchor strap to work with a rear cargo rack and 1 ea. gutter hook anchor strap to work with bikes without a rear rack
• Load centralizing design keeps load mass in tight to the bike and forward for better handling on and off road

Whether it’s a quick overnighter or a multi-day adventure … the OBR ADV Gear 38l Adventure Saddlebag will get you to where you’re going and back with all of your gear. Ample amounts of capacity along with adventure tested robust construction makes the OBR ADV Gear Adventure Saddlebag the bag of choice for the hardiest of adventurers.

Features

• Spacious capacity at approx. 2300in3 (38L) 
• Heavy duty ballistic nylon construction with high strength UV resistant nylon webbing
• Heavy duty dust resistant #10 coil zipper with storm flap
• Padded inside/outside panels w/ load managing compression strap
• Universal one size fits all design with adjustable seat cradle straps
• Generous use of reflective webbing for increased low light visibility
• Versatile Molle Loops for added attachment and tie down points 
• Includes 1 ea. rear anchor strap to work with a rear cargo rack and 1 ea. gutter hook anchor strap to work with bikes without a rear rack
• Load centralizing design keeps load mass in tight to the bike and forward for better handling both on road and off. 
• Quick and easy On/Off versatility
• Slip on rain covers for increased protection against the elements sold separately

Need some extra protection from Mother Nature? We’ve got you covered with a full rain cover designed to slip over your 38l Adventure Saddlebags.

Features

• Heavy duty PU coated 400d nylon construction 
• Drawstring retention cord cinches securely over your 38l saddlebags
• Quick and easy On/Off versatility

* OBR ADV Gear 38l Adventure Saddlebags sold separately.

The Scramble Rack is optimized for carrying luggage on the sides. The side straps provide plenty of mount points and the spacing is MOLLE compatible. The top mounting surface on the Scramble Rack is minimal and designed for small packs.

There are two versions of this rack.

• Enduro - Attaches in the rear with fender hooks.
• Street - Utilizes a girth hitch in the rear. Works great with grab handles.

CONSTRUCTION FEATURES:

• 1 Heavy Duty Metal Rings
• 1" Heavy Duty Nylon Webbing
• Daisy loops along sides and rack surface
• 2 Heavy Duty Cam Tension Loops
• 1 pair of NRS Cam Buckle Bumpers
• Enduro model uses vinyl coated fender hooks in the rear.
• Street model uses girth hitched side straps around the grab handles.

THINGS YOU SHOULD KNOW:

• They recommend their Bag Snake Kit for rigging side bags.
• Check to see if you need an Exhaust Shield.
• Dry bags NOT included.
• Fuel bottles and holsters NOT included.

Patent Pending

The Side Bag Hauler Kit has been designed to work with or without the GCAG Uprising Soft Rack. These straps allow you to use standard dry bags for side luggage. When installed properly you will be able to thrash about offroad and your luggage will stay put! With this setup it is very important to strap your bag in tightly and double check your exhaust clearance.

Bags can be rigged horizontally or vertically.

Hard luggage can increase your risk of injury, especially on offroad terrain. With this system you can reduce your potential of injury and have adaptable, waterproof luggage.

Kit Includes:

• 4 Heavy Duty Cam Buckle Tension Loops
• 4 Four Foot Runner Loops

ProCycle side panel guards to keep your saddlebags from fouling the side covers. Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.

Add Moose 20L Saddlebags for a very economical luggage solution.

Add Wolfman Rocky Mountain Expedition Saddlebags for a premium luggage solution.

ProCycle side panel guards to keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.

Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Side Cover Guards Only. Complete luggage system available HERE.

Giant Loop’s award-winning Pannier Mounts offer greater adjustability and are the ultimate quick-release, lockable solution for soft luggage and gear. These mounts are ultra light and tough, with quick release, quick-mount, lockable black anodized aluminum plates secure Giant Loop’s Round The World or MotoTrekk Panniers.

GL Pannier Mounts can also be used with Rotopax gas/water cans for easy installation on many popular side luggage rack systems. Sold as a set of two, with four matching keys. Stainless steel hardware is included for GL Round The World Panniers installation.

Add the optional GSA Adapter Kit for BMW GS Adventure original equipment luggage racks and other racks with “step” around exhaust. NOTE: Will NOT fit BMW 800GSA factory side luggage racks.

The ProCycle side rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

Side racks only, top rack sold separate.

Compatible with the following top racks:

• ProCycle
• Pro Moto Billet
• Pat Walsh
• Nomadic
• TCI Borrego
• Stock Suzuki (must grind 1/8" off inside of frame mounts)

ProCycle rack installation requires removal of the stock grab bars. Turn signal brackets will be needed if using a top rack that doesn't offer turn signal mounting holes.

Construction

• 5/8" steel tubing
• Computer precision bending
• Durable powder coat finish
• CNC cut brackets
• All mounting hardware included

Here we have right or left side plates that bolt to our ProCycle Side Racks for mounting your RotoPax fuel or water containers.

For mounting Hard Cases to various brands of side racks such as SW motech EVO quick lock, Moose or any racks with a rectangular design constructed with 5/8" to 3/4" material

The Happy Trails SL (Soft Luggage) Rack is designed for use with soft luggage of any type.

Features:

• Three point mounting system
• Strong 5/8" round tubing
• Racks add protection for the bike in the event of a tip-over
• Racks finished with a black powder coat

The Happy Trails SL (Soft Luggage) Racks work perfectly with the any soft luggage bags.

Features:

• Thoroughly tested 4th generation side racks
• Three point mounting system (includes mounting hardware)
• Strong 5/8" round tubing for the arms and SL mounting loop
• Racks add protection for the bike in the event of a tip-over
• Each rack is fabricated by expert craftsmen
• Racks finished with a black powder coat

The Happy Trails SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags.

Features:

• Three point mounting system (includes mounting hardware)
• Strong 5/8" round tubing for the arms and SL mounting loop
• Racks add protection for the bike in the event of a tip-over
• Racks finished with a black powder coat

The Happy Trails SL (Soft Luggage) Racks work perfectly with the many different bags.

Features:

• Three point mounting system (includes mounting hardware)
• Strong 5/8" round tubing for the arms and SL mounting loop
• Racks add protection for the bike in the event of a tip-over
• Racks finished with a black powder coat

Every backcountry adventure-seeker needs a handful of these multi-purpose straps with virtually unbreakable fasteners. Each pair of stretch polyurethane Pronghorn Straps™ feature stamped aluminum buckles sheathed for scratch protection with arrows that line up for easy fastening. Each buckle prong holds the strap in place for pre-fitting and easy chaining of straps together.

Available in color-coded 18-, 25- and 32-inch lengths and marked by size, you’ll find a million uses for Pronghorn Straps—motorcycle, sled, snow bike, 4×4, ATV, UTV/SXS—and so much more!

Giant Loop Rubber Boa Straps confidently put the squeeze on a spare inner tube, tools, water, or other off-road essentials when strapped to dirt bike fenders. Stretch elastic shock cord with heavy-duty injection molded fender hooks. A simple locking slot applies dynamic tension to create a dead-solid connection between plastic fenders and relatively small, lightweight gear—even in demanding terrain.

The low-profile Klamath Tail Rack Pack keeps gear organized and easily accessible — like a tank bag for the tail end of the motorcycle. The 4-liter soft luggage case features a zipper-less nested clamshell design inspired by classic motorcycle rally racing packs.

The Klamath attaches securely to virtually any motorcycle tail rack, many dirt bike rear fenders, and Giant Loop’s Siskiyou Panniers or MoJavi Saddlebags. Now even faster and easier to install and remove, with two included 25″ Pronghorn Straps.

• VOLUME: 4.0 liters (244 cubic inches)
• DIMENSIONS: 11” L x 8.5” W x 4.75” H (28 cm L x 22 cm W x 12 cm H).
• MATERIALS: Rugged Bomb Shell™ vinyl-coated polyester, Mil-spec materials and hardware.

Keep essential items easily accessible with the OBR ADV Gear Sherpa Tail Bag. The OBR ADV Gear Sherpa Tail Bag attaches to your motorcycles rear rack via an optional strap free base panel or by a series of adjustable buckle straps. A padded spacious main compartment is perfect for carrying those items you wish to keep close such as tools, cameras, documentation, rain jacket, etc. A smaller mesh lid pocket sits above the main pocket for storage of smaller items.

Features

• High strength, abrasion and water resistant ballistic nylon construction 
• Heavy duty #10 coil zippers with storm flap
• Secure attachment to your bikes rear rack via an optional strap free plastic mounting plate or adjustable buckle straps
• Spacious and padded trapezoid 9x10x5 main compartment 
• Secondary lid mesh pocket adds even more storage
• Three sided reflective webbing with Molle loops
• 4 external D-rings on top lid with 3mm shock cord gives you a place to put those gloves during a ride break

The Buckin’ Roll is a slim, trim, minimalist tank bag designed to keep essentials close at hand while out of the way when riding the most technical singletrack. This easy-to-mount tank bag features fully welded construction with waterproof coated materials and provides 1.5 liters of packable volume for carrying a smartphone, wallet, snacks, smaller tools, or an extra pair of gloves.

An integrated clear smartphone pocket in the lid with electronics cable pass-through enables on-bike charging and power inside the bag. For those searching for the perfect tank bag for aggressive trail riding where quick, easy access to items is a priority, the Buckin’ Roll is the ideal choice.

The Diablo delivers six liters of rider-friendly on-bike storage by following Giant Loop’s strict design objectives to build minimalist, slim and trim tank bags that seamlessly integrate with the motorcycle. Even when standing on the footpegs while riding off-road, the Diablo never gets in the way thanks to its unique size, shape, and mounting position behind the gas cap using their secure universal harness mounting system.

Fuel fills are a breeze with the Diablo: unzip the tank bag from the harness for quick and easy fuel access. Add to that, electronics pass-throughs integrated throughout each compartment, a full-length interior lining with hook-and-loop-accepting fabric compatible with many camera bag dividers, and included waterproof Giant Loop Tank Bag Dry Pod; the result is a bulletproof adventure-ready tank bag.

Giant Loop’s 8-liter Fandango Tank Bag provides easy access to fuel, room enough to pack gear for a day trip or a long-haul journey, and is loaded with rider-friendly features similar to its smaller counterpart, the 6-liter Diablo. With its larger capacity, the Fandango provides riders a convenient way to carry larger items such as a DSLR camera, rain gear, first-aid kit, and more.

With its movable interior divider with elastic organizers and tire pressure gauge holder, fully lined hook-and-loop-accepting interior fabric, and exterior mesh pocket, the Fandango provides an abundance of packing options, so everything stays organized and in place. And if the weather turns bad, we include a waterproof Tank Bag Dry Pod™ to prevent moisture from reaching sensitive gear.

• Harness Dimensions: 8.5″ wide X 12″ long
• Tank Bag Dimensions: rear 8″ tall, front 5″ tall, 8″ wide
• Volume: 8 liters
• 22 oz vinyl coated polyester Bomb Shell™ reinforced with foam
• Slip-Not and clear vinyl top
• Rubber electronics port
• Water resistant YKK zipper (bag)
• Beefy YKK coil zippers (harness)
• Nylike webbing
• Reflective accents for visibility

Giant Loop Pannier Pockets are a minimalist version of tank panniers that expand front-of-bike storage while staying out of the rider’s way. Pannier Pockets integrate seamlessly with the harness on Giant Loop’s Fandango and Diablo Tank Bags or can be mounted independently with an included webbing strap. Connect them across the middle with the sides strapped to tank, shrouds, or engine guards with a Buckin’ Roll Tank Bag installed.

VOLUME: 4 liters (244 cubic inches) total volume (two 2-liter pockets)

DIMENSIONS: 10” L x 3.5” W x 4.5” H (25 cm L x 9 cm W x 11 cm H).

Keep essential items easily accessible with the OBR ADV Gear Big Sky Tank Bag. The OBR ADV Gear Big Sky Tank Bag utilizes a detachable base panel that attaches and secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable buckle strap at the front. A padded spacious main compartment is perfect for carrying those items you wish to keep close such as cameras, documentation, rain jacket, etc. Two smaller lid pockets sit above the main pocket for storage of smaller items. Designed with the larger ADV bikes in mind, but will also fit the Enduro and Mid-Size Dual Sports.

Features:

• High strength, abrasion and water resistant Ballistic Nylon construction 
• Heavy duty #10 coil zippers won’t jam up in the dust
• Secure attachment through bikes frame/sub frame utilizing supplied adjustable SRB buckle straps
• Spacious 7" x 12" x 6" main compartment with adjustable internal divider 
• Secondary lid pocket with clear zippered top pocket adds even more storage
• Reflective side webbing with Molle loops for accessory attachment and high visibility
• Internal D-ring for clipping keys or other items you really don’t want to lose 
• 4 external D-rings on top lid with 3mm shock cord gives you a place to put those gloves during a ride break
• Slip on rain cover provides additional protection against that inevitable rain shower (included)

Keep essential items easily accessible with the OBR ADV Gear High Basin Tank Bag. The OBR ADV Gear High Basin Tank Bag attaches/secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable strap at the front. Utilize the included interchangeable stow pocket for additional top storage or the map pocket to keep your route in constant view.

Features

• High strength and water resistant 1680d ballistic nylon construction 
• Heavy duty dust resistant #10 coil zipper with storm flap
• Trapezoid front profile that improves the bag interface with riders legs
• Secure attachment through bikes frame/sub frame utilizing supplied adjustable SRB buckle straps
• Spacious 7x8x5 main compartment with front mesh slip pocket
• Includes interchangeable 6x7 zippered stow pocket and 6x10 map pocket that securely snaps onto top panel of lid for easy access or constant view of routes
• Internal D-ring for clipping keys or other important items to keep secure 
• 4 external D-rings on top lid with 3mm shock cord for misc. storage
• 1” web grab tabs that can be used to run a cordage handle through

Keep smaller essential items such as keys, camera, phone, tools, etc easily accessible with the OBR ADV Gear Switchback Tank Bag. The OBR ADV Gear Switchback Tank Bag attaches/secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable strap at the front. A great solution for adding storage without interfering with rider position.

New Design! The top mesh pocket now has a zipper closure!

Features

• High strength and water resistant 1680d ballistic nylon construction
• Spacious 5.5" x 7" x 2.5" main compartment with zippered top mesh pocket
• Heavy duty #8 and #10 coil zippers that won’t jam up in the dust
• Full coverage storm flap over main compartment zipper
• Radiused front profile to interface with riders legs
• Secure attachment through bikes frame/sub frame utilizing supplied adjustable buckle straps

Need some extra protection from Mother Nature? We’ve got you covered with a full rain cover designed to slip over your Big Sky Tank Bag.

Features

• Heavy duty PU coated 400d nylon construction 
• Drawstring retention cord cinches securely over your Big Sky Tank Bag
• Quick and easy On/Off versatility 

* Big Sky Tank bag sold separately

Stamped from heavy gauge stainless steel, Giant Loop® Mounts bolt onto virtually any motorcycle, snowmobile, snow bike, ATV, UTV, SxS, 4×4—and even boats. These mounts help keep straps away from hot exhaust while shortening strap lengths for maximum stability and helps make installation of Giant Loop Saddlebags, Panniers, Dry Bags, and Tank Bags even easier. Sold as a set of two (2).

• DIMENSIONS: 2.5″ L x 1.75″ W (64 cm L x 44 cm W) Hole: 0.39” (10 mm)
• MATERIALS: Stamped heavy gauge stainless steel.

The GCAG Mount Point is a sturdy piece of hardware to make it easy to attach soft luggage and straps to your motorcycle or any vehicle. Made of stainless steel, it will never rust and its strong enough to hold any luggage you care to throw at it.

Sold individually.

SUGGESTED USES:

• Soft Rack Side Strap - Use as an anchor for your GCAG Soft Rack side straps
• Pannier Anchors - You can add these to your hard boxes as attachment points for straps and bottle holsters.
• Dirt Bike Anchors - You can drill dirt bike plastics and add hard mount points for straps, bottle holsters, and luggage systems.

FEATURES:

• Stainless Steel - Never worry about rust or strength.
• Laser Etched Logo - No cutouts to weaken the hardware.
• Solid Slot - The webbing slot has no slits or cuts. This keeps the mount strong and makes it impossible for your straps to slip out on accident. The opening has plenty of room to make it easy to work with. 
• Customizable - We left enough room for you to drill an additional hole if you want to. This could be helpful if you want a smaller hole for your mounting purposes.
• Universal Fit - You can use this with any product you have. The slot will easily accommodate 1" webbing or smaller. Additional hardware is not included. 

DIMENSIONS:

• Length 2" (50mm) x Width 2.75" (70mm) x Height 1/8" (3mm)
• Slot Width 1 1/8" (28mm) x Height 5/16" (8mm)
• Hole Diameter 3/8" (10mm)

Originally designed to give you a place to attach tie-downs to the triple clamp of a dirt bike but, there are many other uses, such as bungee attachment points or in the bed of a truck or trailer, behind passenger peg bolts on a street bike or anywhere you can put a bolt.

• Constructed of stainless steel and is break-rated at 2,000 lbs. Far exceeds all other tie-down hooks or carabiners on the market
• Attach tie-downs almost anywhere there is an 8mm bolt
• Eye is large enough to accept the large size 3/8 in. coated tie-down hooks as well as carabiners
• Packaged in pairs

It seems that while packing for every adventure … we always end up with a few items that were either neglected to be packed, were last minute gear additions, or just needed to be packed in a readily accessible location…. The OBR Adv Gear Tool Pouch is the perfect solution for these miscellaneous items. Once packed the tool pouch can be slipped into any bag or attached externally using integrated webbing loops that are built into the pouch.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• Heavy duty #10 coil zipper that won’t jam up in the dust
• External reflective webbing with Molle loops
• Pouch dimensions 5” x 13”

* Tools not included

In order to be prepared for all possible mechanical mishaps along the trail or on any adventure, we are required to carry a certain selection of tools. The OBR ADV Gear Tool Roll will help keep those tools together and stored in an organized fashion easy to be found should one of those mechanical mishaps occur.

Features

• Heavy duty ballistic nylon construction
• Heavy duty #8 coil zipper
• Individual Tool Slots for Tire Irons, Wrenches, Screw Drivers … along with a zippered pouch providing secure storage for those smaller items
• Detachable 10”x10” slip pocket cover flap that also doubles as a hub pad keeping your hub out of the dirt when changing a flat
• Open dimensions 11” x 17”

The little tool bag that Yamaha provides behind the side cover is nice, but adding this Tool Tube to your TW will make it easier to carry some real tools! The ABS pipe is plugged on each end with waterproof expanding plugs. It is held to the frame of your TW with powder-coated steel straps and brackets. It provides a storage space of 3" ID x 10-1/2" long. Includes all hardware required to mount to your TW200.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end.

If you already have a Tool Tube you can order just the Locking End Cap and lock.

Our Tool Tube mounts in place of the little stock tool carrier. The tube is made from 3 1/2" O.D. ABS pipe. It's held by 2 strong powdercoated steel straps. Both ends are sealed with waterproof expanding plugs. This is the ideal way to carry those items you always want to have with you on every ride. Tube is approx 13" long. Long enough to carry your Tire Iron Wrenches.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end.

If you already have a Tool Tube you can order just the Locking End Cap and lock.

The Front Rack gives a lot of options for functionality.

CycleRacks are made out of Schedule 40 11/16 black steel pipe, bent in a press, and welded together in a jig.

All of their products are 100% made in the USA. If the rack is ever broken for any reason, CycleRacks will replace it for free, you just pay the shipping.

CycleRacks are made out of Schedule 40 11/16 black steel pipe, bent in a press, and welded together in a jig. All of their racks have the same platform, 18" wide by 12" deep. Includes lower mount hardware.

All of their products are 100% made in the USA. If the rack is ever broken for any reason, CycleRacks will replace it for free, you just pay the shipping.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature. It is an easy install and will allow you to strap your cooler, lunch box, tools, extra gas can, or whatever on the back of your bike. Comes complete with all hardware and easy install instructions.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.

Comes complete with all hardware and easy install instructions.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Honda.

Comes complete with all hardware and easy install instructions.

Available in Polished Aluminum, or Black Powder Coat

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Honda.

Comes complete with all hardware and easy install instructions.

Choose from powder coated or raw aluminum finish.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Honda.

Comes complete with all hardware and easy install instructions.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.

Comes complete with all hardware and easy install instructions.

Rear fender carry all rack by Flatland Racing

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your Honda.

Comes complete with all hardware and easy install instructions. 

The Hardcore Soft Rack has been specifically designed for smaller bikes that have very little support in the back for luggage.

The loops on the base and the side straps provide attachment points for our strap kits to secure bags across the back and down the sides of your motorcycle.

We have incorporated two carbon fiber support bars to increase rear carrying capacity.

NOTE: Aluminum support bars have been upgraded to carbon fiber, there is no longer tire iron functionality.

Construction Features:

• Heavy Duty Metal Cams
• Rubber cam buckle covers to protect your bike
• MOLLE Compatible Spacing
• Heavy Duty Nylon Webbing
• Integrated storage for support bars
• Carbon Fiber Support Bars 
• All Attachments Fully Adjustable

Steel cargo rack from Moose Racing. It features a nice wide platform and a durable powder coat finish. 17" wide and 10" long.

• 12-gauge steel construction
• Multiple tie-down locations
• Easy installation with no modifications required
• Hold up to 40 lb.
• Powder-coated black texture finish
• All mounting hardware included

• 12-gauge steel construction
• Multiple tie-down locations
• Easy installation with no modifications required, all mounting hardware included
• Powder-coated black texture finish
• Holds up to 40 lbs.

CNC laser cut from 1/8" aluminum with a large 12.5" (length) x 10" (width) mounting surface area. Quick installation with a 4 point mounting system and no modifications required. There are integrated turn signal mounts, along with multiple strap slots for securing gear bags and cargo. All hardware and instructions are included.

The Rack is compatible with all RotoPax mounts.

You may purchase the rack alone, or you can order the Rack with the RotoPax.

The Nomadic Rack for the early generation KLR650. CNC laser cut from 3/16" 5052 aluminum with a large 12" x 18" mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with no modifications required. There are multiple strap slots for securing gear bags and cargo. Rack is compatible with RotoPax mount. All hardware and instructions included.

Packages available include Rack with the RotoPax Mount or if you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

Nomadic Rack for the TW200. CNC laser cut from 3/16" 5052 aluminum with a large 12 x 10-7/8 mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with a 4 point mounting system with no modifications required. There are multiple strap slots for securing gear bags and cargo. Doubles as a grab handle or tow bar. Is compatible with RotoPax mount. All hardware and instructions included.

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

• Smartly designed to accommodate, but not limited to: 1 gal. - 1.75 gal. Rotopax fuel/water packs, Wolfman Luggage - Wolf Tail bag (M303), and Givi Monokey top cases (separate mounting kit required)
• Large 14.5"(Width) X 13"(Length) luggage platform
• CNC laser cut from 1/4" 5052 Aluminum - weighing only 2lbs. 10oz.
• Each rack is sand-blasted and sprayed with a premium DuPont semi-gloss mini-tex powder-coat finish
• Stainless hardware kit and installation instructions included
• All materials and craftsmanship are sourced 100% in the USA
• Carrying capacity is 20lbs.

• CNC laser cut from light weight 1/8" 5052 Aluminum
• Easy installation, no modifications required
• Large 12" x 9" surface area
• Sleek low profile, and lightweight!
• Rigid 4 point mounting system
• RotoPax 1 gal or 1.5 gal compatible

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

The Nomadic Rack is a favorite for dual-sport riders with ruggedness and ease of installation. This rack does not need to be removed for under-seat maintenance. The mounting area is large 11" x 10" and the rack weighs just under 3 lbs. It constructed of 16 ga. steel and fully welded, then powder-coated black with a shot-peened look. Has a rigid four point mounting system and doubles as a grab handle. Complete instructions and stainless steel hardware are included.

Wide Adventure rack for the WR. Precision laser cut from .25" 5052 aluminum then powder coated black with a shot peened look. This rack is 11" x 17.5" and has numerous tie points for straps or bungees to secure a load. It is pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.

A small light-duty Dual Sport Rack for the WR. Precision laser cut from 3/16" 5052 aluminum. It is powder coated black with a shot-peened look. This rack is 9" x 10.5" at widest points and has numerous tie points for straps or bungees. It's pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in about 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.

• Powder coated black (shot peened look)
• Fully welded construction
• Rigid 4 point mounting system
• Hardware and detailed instructions included

Weighs just 2 pounds for a full 11" x 11" storage area. Fully welded construction from 16 gauge mild steel tubing then powder-coated black textured finish. Rack has a rigid 4 point mounting system. Has tabs to allow mounting the stock tool bag. All hardware and detailed instructions included.

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

Nomadic Racks makes this beautiful rack for the XT225. 3 piece unit that is CNC laser cut from 1/8" 5052 plate aluminum with a semi-gloss industrial black powder coat applied. Final surface space is 9 x 14 with a weight just under 2 pounds.

With all the hardware included and excellent instructions, mounting this rack to the 4 mounting points is usually no more than a 15 minute affair and no modifications are required to your XT.

There are numerous strap and bungee holds making for a very versatile little unit. It is also totally compatible with RotoPax mounting kits and Givi top cases.

Simple, quick installation of this 1 pound rack made from rugged 1/8" 5052 Aluminum. A rigid 4-point mounting system, but still sleek and low allowing for seat removal with no hassles.

Features:

• 12" long by 10" wide
• Integrated turn signal mounts
• Use with or without stock grab handles
• 16 strap slots for securing cargo
• RotoPax mounting kit compatible
• All hardware and instructions included

DRZ400 rack is available in both a Utility and Sport version. The Sport version is 9" x 9" and the Utility is a full 2" longer for added storage space. Both of the S/SM racks have tabs so you can bolt the stock tool bag on.

Please select the rack for your specific model as the differences are significant

• Fully welded construction from 16 gauge mild steel
• Powder-coated black textured finish
• Rigid 4 point mounting system (except off-road model rack)
• Hardware and detailed instructions included

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!

This is the ENDURO Series TW200 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Instructions included, uses stock hardware.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.
• Ready for your 1 gallon Rotopax can and mount
• 1.75 gallon Rotopax fuel can is not recommended with this rack

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF250L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF450L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF300L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX300 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series XT225 Serow rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!

This is the ENDURO Series DR650 rear rack which measures 10 inches wide and 12 inches long.

• Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX230 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.