Search Products

Quality rebuild kit by Moose Racing. Comes with everything you need to get your stock carburetor back in shape!

This brass fuel screw offers a longer head to give you a better hold for making adjustments. This is a nice improvement over the standard extended fuel screw. Kit includes one new screw, spring, washer and o-ring.

Each kit contains float bowl gasket (or o-ring), float valve assembly (or float needle) and o-rings to rebuild one OEM carburetor body.

This Kit replaces vital components in the BST40 Carburetor including new o-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat (needle jet and other pressed in jets are not included in kit) to return the stock Mikuni BST40 Carburetor to like-new operation. As a bonus we have included Viton o-rings for the float assembly and 4 stainless steel allen screws.

• Designed to fit in the factory air box exactly like original filter
• The best selling replacement air filter for competition motorcycles and ATVs
• Unique two stage design allows for easy and complete cleaning
• Dual layer of foam, can be serviced separately
• Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

These Twin Air Dual-Stage air filters deliver unbeatable performance and protection which is why they are the hands-down choice of more world and national champions than all other filters combined. Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles without restricting airflow. 

This filter kit includes a new air filter cage.

• Increased air flow over the stock air filter.
• Designed to increase horsepower and throttle response.
• Easily fits inside the factory air box.
• Larger surface area over foam filters which offers longer service intervals in dusty conditions.
• Four layers of premium cotton gauze provides outstanding filtration.
• Washable & re-usable, never wears out.
• One filter will last the lifetime of your bike.

The OEM vent foam filter can deteriorate after only a couple of years. When it does it can allow enough dirt into the engine to do significant damage. Replace your filter now with a washable cotton & steel screen filter.

This filter is recommended to be oiled like any other air filter to work properly.

Only for bikes with the stock BST40 carburetor!

Thick, flat foam, greaseless sealing ring ensures maximum contact with your airbox while acting as a breathable gasket for increased air passage

Features:

• Coarse open-pore foam catches airborn dirt, grime, and sand
• Fine open-pore inner foam acts as second filter to trap the smallest particles while ensuring maximum air passage
• Adhesive withstands repeated cleaning
• Smaller than stock to increase air space and circulation around filter

• Provides a simple and affordable solution to carburetor tuning problems
• Allows you to tune your bike for increased power and smoothness while retaining fuel economy
• Includes a guide booklet on how to install and use your jet kit to it's full potential

Replacement shift lever with folding tip for use with OEM footpegs.

A set of replacement brake and clutch levers. Standard length.

• Tool-less cable adjuster
• Machined billet aluminum with a durable anodized finish
• M8 x 1.25 thread

Did you fall and break your shift lever on your TW200? Replace it with a quality Moose shift lever.

A quality replacement speedometer cable

A quality set of replacement throttle cables from Motion Pro.

A high quality replacement clutch cable.

Throttle cable routing on the XR650L gives you very little extra slack for raising the bars or adjusting them towards the rider. We now offer throttle cables that are 3" longer than stock allowing you to customize the bar position to your riding style.

These quality cables are made by Motion Pro.

OEM throttle cable set for the CRF250L

*generic image, actual cables may look different.

CNC machined from 6061 Aluminum by the crew at Warp 9. This upper triple clamp will help to get the bars out of your lap on the XR650L. It allows for six different bar positions (three mount positions and reversible offset mounts). Uses the stock key switch and works with the handlebar lock. Speedometer and indicators all use mounting positions as well.

This clamp comes with 1-1/8" handlebar mounts.

• Ergonomically designed
• Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
• Full diamond pattern for an unparalleled feel in both wet and dry conditions
• Inner diameter optimized to keep grips secure in any conditions
• 115mm overall length; fit 7/8" bars and throttle sleeves

The IMS Super Stock pegs are the perfect choice for both the daily commuter and the rider-in-training. Their mellow tooth design keeps you planted while preventing wear on your soles. They are also perfect for young riders who don't need or want a more aggressive option. 

Wider foot pegs for sure-footed comfort. 

17-4 cast stainless steel.

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty. Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!

• Wider, lighter, stronger design
• Widest (mm) and lightest pivoting pegs on the market
• Upgraded heavy duty, long life springs
• Unique multi-directional grip pattern
• Outstanding build quality
• Lifetime Warranty*

CNC machined from 6061 Aluminum by the crew at Warp 9. This upper triple clamp will help to get the bars out of your lap on the XR650L. It allows for six different bar positions (three mount positions and reversible offset mounts). Uses the stock key switch and works with the handlebar lock. Speedometer and indicators all use stock mounting positions as well.

This clamp comes with 1-1/8" bar mounts that work perfectly with the tapered handlebars included. Then there is a new set of ProGrip 714 Rally Grips.

Did you go to an electronic speedo? SM Wheels? Something where you don't need the stock speedo drive? Then you need this to make up for that lost space and protect the bearings.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

A premium billet sprocket carrier from Warp 9 Racing that houses 2 bearings to help protect against the sideways twisting load that is commonly known to prematurely wear out the bearing and cush rubbers. This wear can cause extreme failure possibly damaging the hub.

Anodized, Includes spacers already installed.
Stock sprocket bolt pattern to fit any stock compatible sprocket.

These are designed to work with Warp 9 and OEM hubs.

Full braking power for your XR650L supermoto conversion. Floating EBC 320mm brake rotor with gold anodized alloy carrier. Includes caliper relocation bracket.

• EBC brake pads contain aramid fibers; these are man-made high-performance fibers used widely for their light weight, high strength, abrasion resistance and thermal stability
• Aramid fibers have high strength-to-weight, thermal stability and abrasion resistance to provide advantages over cheaper steel fiber-based products
• Provide excellent stopping power without noise and rotor galling
• Fingertip control and strong, predictable brake response

Have you already ditched the bulky tail light on your XR? Don't want to bend your license plate and wrap it around your rear fender? Here is a great solution to clean up the looks of the backside of your XR650L. If you haven't already upgraded to the smaller and better looking WPS Tail light, select 'Bracket & Light' from the menu and you will get the WPS Taillight AND the License Plate Holder.

Please note that this no longer has a window for a license plate light. To stay legal, you can mount one or two License Plate Lights to your plate holder, or you can check out the LED License Plate Frame.

The DR650 Air Scoop was designed to increase airflow to the oil cooler helping to prolong the service life of your motorcycle.

  Does NOT work with Acerbis 6.6 gal tank.

You want a lighter replacement for your heavy steel stock tank? Don't need the extended range (or bulk) of the big Acerbis or Clarke tank? The 4.0 gallon tank from IMS might be just right. Includes cap, uses stock petcock.

Get better range from your XR650L by adding a Clarke 4.7 gallon fuel tank. Cannot use stock shrouds.

Available in Natural, White, Black, and Red. Natural color is recommended if you wish to easily see the fuel level in the tank. Includes cap, uses stock petcock.

• High-density polyethylene gas tanks offer maximum fuel-carrying capacity
• 3.5 Gallon Capacity
• All necessary hardware included (tank decals not included)

Acerbis 3.9 gal tank adds function and great looks to your DRZ. This high capacity fuel tank incorporates modern lines and high quality construction that can't be beat. Includes gas cap, petcock and all mounting hardware.

This kit provides much of the performance gain of our 130 kit but keeps you legal for racing classes that do not allow motors over 125cc.

• Stock bore size Wiseco 54mm high compression 11:1 piston, rings, wrist pin, and clips
• HotCams stage 1 performance camshaft
• Includes top end gasket set
• Piston fits into the stock bore; requires no modification to your cylinder!

A head gasket and base gasket to fit the Big Bore cylinder.

This kit provides much of the performance gain of the more expensive 150 (143cc) kits. But gives better reliability due to the thicker wall of the cylinder sleeve.

• Wiseco 55mm high compression 11:1 piston, rings, wrist pin, and clips
• HotCams stage 1 performance camshaft
• Includes top end gasket set
• Requires cylinder to be bored to fit the larger piston

Genuine Honda replacement oil filter cover gasket.

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

14mm Thread

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

12mm Thread

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

10MM Thread

ProCycle side panel guards to keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.

Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Side Cover Guards Only. Complete luggage system available HERE.

The ProCycle top rack is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.

Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Multiple mounting points for various luggage and strap options. Includes a mounting point for a rotopax mount (not included).

Top rack is 15in wide by 11in from front to back.

Top Rack Only. Complete luggage system available HERE.

The ProCycle rack system is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.

Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Multiple mounting points for various luggage and strap options. Top rack includes a mounting point for a rotopax mount (not included). Side panel guards keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.

Top rack is 15in wide by 11in from front to back.

This set includes the ProCycle Top Rack, Side Panel Guards, and sub frame bracket:

Round The World Panniers™ offer a flexible, impact-resistant, and waterproof alternative to a large touring hard pannier set — giving you every bit as much packable volume and convenience without the extra weight and bulk of hard boxes. The largest capacity pannier in their product line, Round The World Panniers, offer 90 liters of packable volume that’s ideal for everything from a weekend of motocamping to long-haul adventure motorcycle travels. They are also great for riding with two people and carrying their gear.

Roll top with durable side-release buckles for secure closure and load stability.

Included set of two seam-sealed waterproof inner liner Dry Pods™ keep gear dry and organized.

• VOLUME: 90 liters (5,490 cubic inches) (45 liters per side).
• DIMENSIONS:
  PANNIER BODY: 21″ tall x 15″ wide x 7.5″ deep (51 cm tall x 38 cm wide x 19 cm deep)
  FRONT DRAWSTRING POCKET: 7.5″ x 11″ x 3.5″ (38 cm x 28 cm x 9 cm)
  REAR ROLL-TOP POCKET: 7.5″ x 11″ x 3.5″ (38 cm x 28 cm x 9 cm)
• WEIGHT: 10.4 lb. (4.7 kg.)
  14.8 lb. (6.7 kg) with optional GL Pannier Mounts and hardware.
• MATERIALS: Rugged Bomb Shell™ coated fabric construction with sewn seams, reinforced ballistic nylon impact zones, and reflective trim. Heavy-duty fasteners.

Pair Round The World Panniers with GL Pannier Mounts for the ultimate in lockable, quick-mount, quick-release convenience.

• Lifetime Warranty
• 100% waterproof with electronically heat welded seams
• Made from durable UV Coated 24 oz. PVC Tarpaulin
• Watertight roll closure with quick release buckles
• Padded back panel conceals backpack straps when using as a tail pack
• Securely mounts using 4 NEW RIGG STRAP™ system 
• Purge valve makes for easy compression  
• Front MOLLE panel includes a clear waterproof document pocket
• Integrated external pocket to hold optional hydration bladder (CL-HYDRO-S not included)
• 1 side bottle pocket large enough to hold 30 oz. fuel bottles (Bottles not included)
• Backpack straps are adjustable and padded for comfort
• Dimensions: 12.5”L x 7”W x 21.5”H
• Holds approx. 30 liters

The universal E-series adapter plate is designed to add a Givi Monokey topcase to most existing flat rear luggage racks. All necessary mounting hardware and installation diagram for attachment to generic tubular-steel flat rear luggage racks is included. This is a universal plate so making it work on your tail rack might need a little self engineering.

Typically installs quickly using simple hand tools. Mounts standard Givi Monokey topcases (ie E45 Elegant, E460 Delux, E52 Maxia), or the flat, stable surface can be used as a solid toprack when the topcase is not needed. Not for use with GIVI Monolock topcases. Made of durable molded nylon with a rugged black finish.

What's in the Box:

• GIVI E251 Adapter Plate
• (4) W-style Adapter Hooks
• Mounting hardware
• Installation instructions

Protect your frame/paint from scuffs and scratches with frame guards. The CR80 & CR85 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.

The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike. Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.

Features:

• Protects the frame in the maximum friction area
• Use of rubber to increase grip and therefore control of the motorcycle
• Easy assembly and dismantling with expander and plastic bands

Available in 2 colors

This plate will protect the valuable center cases. All skid plates are supplied with the necessary stainless clamps and bolts where possible.

B&B Off Roads Honda CRF50, CRF70, XR50 & XR70 bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.

All bash plates are supplied with the necessary stainless clamps and bolts where possible.

All bash plates have a polished finish and have foam or rubber where required.

B&B Off Roads Honda CRF80, CRF100, XR80 & XR100 bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.

All bash plates are supplied with the necessary stainless clamps and bolts where possible.

All bash plates have a polished finish and have foam or rubber where required.

This plate will protect the valuable center cases. All skid plates are supplied with the necessary stainless clamps and bolts where possible.

B&B has updated this design to fit the 2019 model.

B&B Off Roads Honda CRF125F bash plate is designed to give your mini bikes frame rails & engine casings some added protection. Your engine casings a very vulnerable part of your bike which can be easily damaged from roosted debris, sticks/logs while riding or from simply dropping your bike. 

• Made from 4mm 5083 Structural Plate
• Fully tig welded
• Comes in polished or black PPA coating.
• All hardware for mounting is included.
• Foam insulated to help reduce frame contact/rubbing

B&B Off Roads Honda CRF230L bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.

All bash plates are supplied with the necessary stainless clamps and bolts where possible.

All bash plates have a polished finish and have foam or rubber where required.

B&B Off Roads Honda XR150L bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

B&B Off Roads Yamaha WR450F bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

B&B Off Roads KLX230R bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

• Made from high-density polyethylene construction
• 8mm thick HDPE offers more protection than the standard Pro Skid Plate
• Full linkage protection
• 40% lighter than aluminum and no rattling
• Mounting hardware and installation instructions included

B&B Off Road Engineering provides the most advanced radiator protection system available.

B&B RADIATOR GUARDS FEATURE -

1. Maximum side and front impact protection-Using a combination of CNC machined 6000 series 3 dimensional aluminum extrusion and 5000 series alloy plate we have created a system to protect your radiators from virtually every direction

2. Maximum roost and debris protection- Due to the angle fin design in our radiator guards there is very little of the radiator core and veins that are directly exposed to roost, debris and trail side sticks

3. Maximum airflow -B & B Off Roads unique aluminum front louver panel constructed from high strength extrusion allows 3 dimensional fins to be incorporated into the design to mimic the airflow characteristics of the genuine plastic radiator fins

4. Removable finned louver panel- Front panel only requires a few bolts to be loosened to allow for easy removal for cleaning of the radiator

5. Integrated modular construction- Three piece modular construction allows for greater design flexibility eliminating the compromises inherent with one piece designs

6. Easy fitment no mods required- Radiator guards can be fitted in approx ½ hour using basic tools

7. All parts available individually- If you damage any part of the radiator guards our design allows you to purchase only what you require

• Designed to minimize handlebar vibration for Barkbuster Handguards that can’t accomodate OEM handlebar weights.
• Sleek aerodynamic look.
• Forged Steel with powder coat finish.
• Fit in conjunction with most Barkbusters backbones (except EGO).
• Fits externally to the VPS backbone.
• Available in black.
• Sold as a pair

Weight:
360 grams/pair or
180 grams/each

This is a simple three piece kit you can install in minutes that cleans up the stock DR rear-end. 

We use the DR250 taillight that fits perfectly into the pocket of the stock taillight on the DR650 fender. It is smaller, looks great and is out of harms way more than the stock unit. It is a total 'plug-n-play' as the wire pigtail plugs right into the DR650 harness just like stock. 

Then we use a small LED light to keep you legal and illuminate your license plate, which gets mounted to our custom stainless steel bracket that is powder coated black, eliminating the stock ugly plastic mount.

Kit includes:

• Black Powder Coated Stainless Steel License Plate Bracket
• 250 Taillight/Brake Light Lens
• LED License Plate Light

Make the Edge-2 installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. Will need a crimp tool or set of needle nose pliers to crimp connectors on.

This plug-n-play kit includes sealed LED headlight assembly and adjustable mounting brackets specifically designed for the 1996-2020 DR650SE. No wiring, soldering, resistors, drilling, or fabrication required however due to the size of the headlight minor trimming on the backside of factory plastic headlight fairing is needed in non-visible areas.

• Low Beam: 25W, 3,600 Lumens
• High Beam: 40W, 4,500 Lumens
• Color Temperature: 6,500k
• CREE LED Chips
• DOT & SAE Approved
• CE, RoHS, ISO9002, IP67

This DOT kit includes LED headlight assembly with plug-and-play wiring harness, a specially designed adjustable steel mounting bracket, and all the required installation hardware.

No cutting, no drilling, no wiring modifications! Installation takes 5 minutes.

This kit is highly recommend over the non-DOT kit. The low beam has extra punch and a proper beam pattern cut-off. The high beam throws light far and wide. It’s already a crowd favorite!

Two colors to choose from, Chrome or Black. Light output and beam pattern are the same for either color.

• Low Beam: 20W, 2,800 Lumens
• High Beam: 35W, 3,600 Lumens
• Color Temperature: 6,000k
• DOT & SAE Compliant
• CE, RoHS, ISO9002, IP67

Available in two wattage configurations: 30 watts and 42 watts, which produce luminous outputs of 5000 lumens and 7000 lumens, respectively. If your motorcycle's electrical system cannot accommodate these wattages, the light can be operated in low beam mode, resulting in a 50% reduction in power consumption. When additional illumination is required, users can easily switch to high beam mode.

Despite its compact size, this LED light is designed to deliver substantial luminous output. Its performance surpasses that of other mini LED lights in the market.

The light is equipped with a durable push-button switch, metal handlebar mounts, and adaptable options that allow for compatibility with various motorcycle configurations. It features components such as switches, cords, strain reliefs, and optics that are engineered for enhanced water resistance, robustness, and overall performance.

Tailored specifically for snowbike applications, this light boasts a compact design with significant output capabilities. Enhanced heat is directed to the lens, facilitating snow melting and enabling continuous riding.

This light is ideal for users seeking a lightweight solution to comply with legal requirements for headlights while also being sufficiently powerful for racing and trail riding.

Installation is straightforward, with the light mounting easily to a number plate; however, the use of the recommended upgraded stainless steel platform mount is advised for improved convenience. The light operates using the motorcycle's battery power.

The Explorer light bar is equipped with a GoPro-compatible mount and an aluminum platform, allowing for versatile mounting options. A handlebar mount is provided for central positioning on the handlebars. (Fits all stock 7/8 and 1 1/8 bars. Not for flexbars) Notably, there are no plastic components in the light head assembly.

Included with the product is a rubber-covered switch that can be mounted on the handlebars, offering three power settings: off, 50%, and full brightness.

The light features a combo beam pattern, integrating spot, driving, and wide beam configurations into a single unit.

Now a lifetime warrantied LED light set at a budget friendly price.

The new Cyclops Pegasus led light set comes complete with a high quality relayed wire harness and a potent combo light beam pattern.

We are able to offer this fantastic light at a great price due to a one piece optic and sealed beam construction, eliminating extra parts and creating a very durable and high performance light.

These lights in white feature 7 watt emitters (28 watts per light) with two 10 degree and two 25 degree optics, Good for 500 plus ft of lighting (white).

The amber version is a Cree 3 watt emitters (12 watts per light).

This combo beam pattern offers good forward lighting and extremely good conspicuity.

The light set is available in white 5600K or a extremely bright Amber, perfect to allow those autos to see you. Lightweight and robust at 2.75 inches with a single stud mounting, they fit just about anywhere you would like to mount your lights.

Specs:

• Canbus compatible, full relayed wire harness included
• 5000 plus lumens for the set
• 28 watt draw per white light, 12 watt draw per amber light
• ISO 67... waterproof
• 5600K (white 33% brighter than Amber)
• Life time warrantied
• Sold as a pair

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

All the advantages of a flatslide pumper carburetor at a much friendlier price than a Keihin FCR.

Our complete genuine Mikuni TM40 pumper carburetor kit comes with alloy adapter rings bonded to the carburetor body for a firm reliable fit in the stock air boots. We also include a remote mounted choke knob, complete instructions along with a wide range of main jets and pilot jets for fine tuning or to accommodate bikes with extensive modifications.

RallZ is the most aggressive off-road adventure tire in the Motoz range. Its DNA is part desert race tire and part long distance adventure tire. An ADV tire designed in Australia for adventure and rally use. Based on the popular Tractionator Adventure but with more aggressive off-road traction in all weather extremes.

DOT ECER75 approved.

NOTE: Tubes can be run in Tubeless (TL) tires, but a Tube Type (TT) tire cannot be run Tubeless.

It is a good practice to replace your sealing washer with every oil change. These 10 piece kits are made up of 5 Copper washers and 5 Aluminum washers. The manufacturer recently decided to make half of the kit Copper washers as that is the material of choice for many OEM manufactures. This gives you the opportunity to decide which you prefer, but either will work great at creating a leak-free seal between the case and the drain plug.

Our logo on a 20oz double wall 18/8 stainless steel thermal tumbler with copper vacuum insulation, threaded snap-fit lid, and powder coated finish.

The copper plating on the inner wall is an extra defense against temperature transfer. Heat escapes much slower so your hot coffee stays hot even in a snow storm, and heat enters much slower so your ice water doesn't melt even under a blistering summer sun.

We have tested this bottle with 160° water placed on it's side for 7 hours mimicking being in a saddle bag with coffee from the morning campsite. The bottle did not leak when the lid was properly secured and the water only dropped to 113° at the end of our test.

Pair it with the OBR bottle wrap for even better value and have a holder on your luggage for your new bottle for ease of access and security.

Convenient professional grade spoke wrench, a great addition to any tool pouch.

• Knurled nonslip aluminum handle
• Includes 6.8mm tip
• Quick release ball detent tips allows for quick changes to other optional sizes

Recommended for use with Warp 9 wheels. Please measure nipple size to ensure proper fit.

ULTIMATE SPROCKET WRENCH KIT

• 12” long wrench gives you more torque to get those thread locked sprocket bolts off easily
• Double ended 12mm & 13mm to fit all modern motocross, Enduro and dual sport bikes
• Dog leg wrench design allows wrench to easily clear rim edge and wide tires
• 8mm allen fits most Japanese bikes 8” long for extra leverage
• Torx T45 fits late model KTM and Husqvarna bikes, 8” long for extra leverage
• Vinyl coated handles to protect rim edge and give a non slip grip
• Makes routine sprocket bolt maintenance a quick and easy job

A high quality master link press tool from Wirth Machine used for the removal and installation of master links using a press fit link plate.

Fits 520, 525, and 530 pitch chain.

Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.

Thin wall bi-hex sockets designed to access narrow spark plug holes.

• Use with 3/8" drive ratchet or wrench
• Choose the one that fits your spark plug size:  14mm, 16mm, 18mm, or 21mm.

Special tool to remove the flywheel from the end of the crankshaft.

• Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened
• Knurled knob on adjuster drivers ensure a precise and secure grip
• Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw

Set includes:

• (1) 10mm steel socket wrench
• (1) 3mm square tappet adjuster

Originally designed to give you a place to attach tie-downs to the triple clamp of a dirt bike but, there are many other uses, such as bungee attachment points or in the bed of a truck or trailer, behind passenger peg bolts on a street bike or anywhere you can put a bolt.

• Constructed of stainless steel and is break-rated at 2,000 lbs. Far exceeds all other tie-down hooks or carabiners on the market
• Attach tie-downs almost anywhere there is an 8mm bolt
• Eye is large enough to accept the large size 3/8 in. coated tie-down hooks as well as carabiners
• Packaged in pairs

Corbin has replaced the stock two-piece seat with a single seat model to provide more structural support. Corbin has created two models, one to maintain the stock seat height, and one to provide an easier ground reach like the stock seat in a lower position. By designing each seat specifically, they were able to keep excellent ergonomics. Corbin's saddles are designed to work with the optional Honda saddlebags. Mounts to the motorcycle similar to stock and secures with the Honda key lock system. All brackets are included and pre-mounted on the seat so it's ready for immediate installation.

Passenger seating area is designed with a neutralized platform to resist sliding forward in the saddle. Dished shaping provides an excellent contact patch and maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest as shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike. Please note, the Corbin backrests may not work in the saddle if you are using the Honda trunk.

Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.

The design shown includes Black Grabber seating with Asphalt vinyl contrasting sides and nose with a tasteful color coordinated welt. Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.

Canyon Dual Sport saddle is designed specifically to provide long range comfort for your Tenere 700. We also offer a Bench style saddle that provides more freedom of movement for you that leans towards off-road riding.

Their high density Comfort Cell foam allows a sleek profile, while providing a firm supportive ride that lasts. Rider seating is ergonomically shaped to fit the curve of your body and provide better weight distribution. This also helps to eliminate the centralized pressure felt from the stock seat. In the nose area, they sculpt the saddle narrow to allow for good ground reach. Canyon Dual Sport has a seat height between the Yamaha Rally seat and Yamaha Low seat.

Passenger seating area is designed with a neutralized platform to curb sliding forward in the saddle. Dished shaping provides an excellent contact patch while maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike.

For an added luxurious touch, this saddle is available with the option of electric seat heaters. With the flip of a conveniently located switch built into the left side of the saddle, both the rider and passenger seating platforms will heat up and maintain temperature automatically. Simple to install with just a pigtail wiring to your bike's fusebox. All other components are built into the saddle and come preinstalled.

The design shown above includes Black Carbon-Fiber leather seating with Matte Black vinyl contrasting sides and a tasteful color coordinated Smoke Gray welt.

The default cover choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

With this seat having so little foam to be able to make it a low, there is a sacrifice in comfort. The T700 comfort low seat provides you with 7/8" of drop compared to the OEM seat for increased reach to the ground.

Available as a Foam & Cover Kit and an option for an OEM Rear Cover, replacement cover to match the Kit.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

The T700 Comfort Tall seat provides you with 1.25" of height compared to the OEM seat for increased reach to the ground.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Available as a Foam & Cover Kit and an option for an OEM Rear Cover replacement cover to match the Kit.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

The T700 comfort sport-touring seat provides you with an increased level of comfort and support to aid with those long days on the bike.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Available as a Foam & Cover Kit with rear cover only or rear foam & cover kit. 

The genuine factory shop service and repair manual. This is the reference manual Yamaha dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your T7.

This product has been designed to fit the Yamaha T7 Ténéré

This kit will give you 80mm of adjustment over the stock screen.

In the raised position, the difference in ride comfort is remarkable. Wind noise reduction is very noticeable and airflow underneath your screen reduced the vacuum effect, creating smoother airflow and reducing turbulence.

In the lowered position, the screen sits at the same height as stock.

To adjust the screen, loosen the thumb nuts, slide into position and re-tighten the thumb nuts, no tools required.

This Waterproof First Aid Kit is the perfect size for your "Don't leave home without it" list.

Always keep your first aid kit handy and right where you left it. The Waterproof First Aid Kit easily mounts almost anywhere you need it with self-adhesive hook-and-loop mounts. Contents stored in a heavy-duty nylon bag, with waterproof zipper and special coating to ensure your supplies stay dry.

• Innovative multi-use tire tool set
• Breaks the bead on most street and off road motorcycle tires
• Integrated tire spoon for tire removal and installation
• Light weight and compact size is perfect for tool packs
• Ergonomic handles with crossguard to keep hand from riding forward
• Forged 7075-T6 aluminum construction for strength and durability
• Black anodized finish
• Patent pending

Available in 9.5" aluminum (ideal for travel) and 16" forged steel (useful in a home shop/garage)

• Made from 4mm 5083 Structural Plate
• Fully tig welded 
• Comes in polished or black PPA coating. 
• All hardware for mounting is included.
• Installation guide included

Note - Drilling of the rear guard is required for installation.

Open Trail Terminal Tender blocks allow you to add up to six different accessories on your battery.

Features:

• Fits any 12v powersports battery with square posts
• Three mounting options: side, front, and top
• Includes two blocks (+) and (-) and 8 button head bolts

Keep your smartphone, GPS and/or MP3 charged while enjoying your ride. Water- and weather-resistant, the Dual USB Port/Plug Charger offers you 5-Volt/2-Amp dual USB ports that have an inline fuse for protection. It comes with 38" of wire and 12" long battery quick connect rings. The mounting bracket that is included fits 7/8" and 1" bars.

Boyesen Pro Series dual-stage reeds combine a carbon-fiber top reed with a fiberglass bottom reed for unrivaled performance. The Pro Series Reeds are more responsive than our traditional Power Reeds. The carbon-fiber top reed has excellent response characteristics that provides even quicker acceleration, stronger throttle response, and more over-rev than our standard Power Reeds. The fiberglass bottom reed provides stability and longer reed life.

• Hardened metal rotor/disc locks resist cutting, sawing and chisel attacks
• Comes with carry pouch and a disc lock reminder cable
• Includes an extra mini flashlight key for three total keys
• Features a durable push button lock with high security anti-drill round key lock cores

Keep essentials close at hand with this useful piece of water repellent motorcycle luggage. This tank bag is rugged, reliable, and ready to go!

• Fits most sloped tanks
• The 4 point harness makes it easy to attach to your tank
• Easy to find yellow cord on main opening zipper sliders
• Designed in the USA and made with Wolfman legendary care and quality

The Blackhawk Motorcycle Tank Bag WP (Welded Product) is their largest tank bag, now manufactured using the latest in radio frequency welding technology. The water repellent Blackhawk is ready for the long haul. Contoured to fit most sloped tanks. The Blackhawk utilizes the same 4-point harness used on the 2020 Enduro Tank bag, making switching out bags a snap.

Other Features:

• Custom 840d Nylon TPU laminate, black outside bright yellow (Wolfman Colors) inside
• Removable clear pocket (Not for phone use as smartphones can overheat in direct sunlight)
• Removable waist belt pouch

Dimensions:

• Length: 11.25" /28.5cm
• Width: 8.5" /21.5cm
• Height: Front-7" /18cm-Rear- 4.75" /12cm
• Clear Pocket: 9.75”/24.7cm long X 4.75”/12cm wide

Limited Quantity Available

• Reduce the friction dragging down your drivetrain
• Polyurethane roller with 98A durometer hardness for long life
• Precision contact sealed bearings keep water and dirt away

• Six class 10.9 steel sprocket bolts with matching factory-style metal locking Fuji nuts
• Each sprocket bolt has medium-strength threadlock patches for a double lock
• Includes Allen key insert that adapts 8mm T-handle or socket to proper Allen key size for easy installation and removal
• PART #2401-0941 is made to match stock CRF sprocket hardware with 14mm nuts but will work with most Japanese models

If you are adapting a GSXR or Hayabusa muffler to your DR650 you will need a fresh gasket that seals between the muffler and the mid-pipe adapter. There are two sizes depending on which OEM muffler you are using. The 4-bolt mufflers use the 2-1/2" OD seal ring. The 3-bolt mufflers use the 2-3/4" OD seal ring.

This optically clear headlight guard is CNC cut for a perfect fit on your XT250 headlight lens. 

It is made of durable aircraft grade 3/16" thick cast acrylic which resists harsh rock impacts, trail scuffs, and incidental scratches. 

Velcro fasteners hold the guard firmly in place and allow for easy on & off should it need an occasional cleaning. Installation is a quick five minute job, positioning template included.

This optically clear headlight guard is CNC cut for a perfect fit. It is made of durable aircraft grade 3/16" thick cast acrylic which resists harsh rock impacts, trail scuffs, and incidental scratches. Velcro fasteners hold the guard firmly in place and allow for easy on & off should it need an occasional cleaning. Installation is a quick five minute job, positioning template included.