ProCycle currently has reduced staffing due to our state governor’s orders. Orders will be processed as efficiently as possible. Your patience is appreciated.

Jet Kit Installtion Instructions

Submitted by Lora Baughn on Thu, 03/14/2019 - 16:13
DRZ125 Jet Kit Installtion Instructions
File

 

 DRZ125 Jet Kit Installation Instructions

(See available PDF for printable version)

Parts Supplied

  • 20 & 22.5 Pilot Jets, 107.5 & 110 Main Jets and Needle Clip on 2nd groove with washer on top of clip.

Installation Instructions

  • If your DRZ is stock, start with a 20 Pilot Jet and a 105 Main Jet. Use the new Needle with the Clip on the 2nd groove with washer on top of Clip.
  • If you have an aftermarket pipe, begin with a 20 Pilot Jet and a 107.5 Main Jet. Use the new Needle with the Clip on the 3rd groove with the washer on top of the Clip.
  • For a richer top end, install the 110 Main Jet.
  • The above recommendations are a good starting point for jetting only. Use the jet combination that makes your bike run the best!