Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.

Suspension

Use this installation tool from Cogent to be sure that your Cogent Drop-in Dynamic Cartridges are installed correctly. A strong magnet in the end holds the cartridge firmly while you lower it into your fork leg. Then slide the spring over the tool until it holds the DDC down, then gently remove the tool. That simple. Never again question if it is properly seated on the damper rod.

Works equally well for removal when you need to change your fork oil. Also works great with Race Tech Emulators.

$44.95

These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. These units have been given the seal of approval by the ProCycle staff for both performance and ease of installation. No disassembly of your forks, no drilling of damper rods. Just change the oil over to 5w and install the DDCs under the springs and hit the trails.

Add DDC Install/Removal Tool, Cogent Dynamics
$202.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Fork Boots, 69 Series

DR650 '96 - '22

An excellent replacement for the stock fork boots. These are great for protection from dirt, rocks and other contaminants. These boots utilize the latest advances in material technology to adapt to fork and styling demands. These high quality fork boots are 1/4 the price of the OEM factory replacements.

Choose black, blue, red or yellow.

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Fork Brace, Eagle MFG

DR650 '96 - '22

Fork brace precision machined from aluminum barstock. Drilled and tapped for optional lower fender attachment.

Hard anodized black for corrosion protection. Fits OEM forks.  Split design allows for installing in minutes without having to remove the forks.

$119.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fork Brace, Warp 9 Racing

DR650 '96 - '22

A CNC machined fork brace to stiffen up the notoriously wimpy front end on the DR. Have more confidence in your front end on or off the pavement.

Split design means that installation takes minutes without having to remove the forks. Available in a black anodized finish.

$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fork Bushing Kit

DR650 '96 - '22

Kit includes all the fork bushings, o-rings, snap rings and washers this kit comes with what it needs to completely rebuild your front fork bushings

$27.95

You can adjust the preload on your rear shock quite easily, why not on the forks as well? These caps give you the ability to adjust the spring preload in your forks to match your load.

Caps are CNC machined beauties with a center blue anodized core.

$192.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fork Seal Driver

DR650 '96 - '22

Innovative design makes tool easier and more secure to use than old fashioned pin-aligned drivers

  • Knurled anodized aluminum locking ring
  • Perfectly weighted to drive seals
  • Carbon steel body halves
$48.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fork Seal Kit

DR650 '96 - '22

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.

 

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fork Seal Skins, Dirt Skins

DR650 '90 - '22

Helps protect vulnerable fork tube and seal from dust, dirt, and corrosive elements. Hook & loop (Velcro) fastening on back side makes installation or removal for cleaning a breeze.

Choose Color
$24.95

Included in this kit are fork springs, Cogent DDC (Drop in Damper Cartridge) performance cartridges and three bottles of 5w fork oil. Refresh those tired old forks and make them better than new. These DDCs from Cogent are easy to install. No taking the forks apart, no drilling of the damping rods, nothing. Just take them off, flip them over to drain the oil, add new 5w oil, drop in the DDCs and then add the springs and spacers and then install the caps. Preload spacer material is included with the .47 and .70 springs, additional spacers are not needed with the other kits.
This upgrade offers better control off-road as well as on. Less brake dive keeps the fork up in the middle of the stroke on-road and better control off-road whether it be rolling water bars or bouncing off the rocks.

Add DDC Install/Removal Tool, Cogent Dynamics
$329.95

This complete fork upgrade kit includes stiffer fork springs and Race Tech cartridge emulators, as well as a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.

You can select from various straight rate springs or even 'Progressive Suspension' springs to customize the package to your needs.

$329.95

Race Tech has developed these straight rate springs specifically for the heaviest loads.

  • Sold in pairs.
$149.95

Progressive Suspension springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. These springs are significantly stiffer than the wimpy stock springs. Spring rate spans the .45-.62 kg/mm range.

  • Sold in pairs

 

$129.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fork Springs, Straight Rate

DR650 '96 - '22

Lightweight, for reduced unsprung mass. Straight rate springs will give better control in the rough stuff.

  • Sold in pairs.
  • .47 springs are 24% stiffer than stock and will be a great choice for most lighter weight riders
  • .52 springs are 39% stiffer than stock and will be a better choice for medium weight riders
  • .58 springs are 56% stiffer than stock and will be a good choice for medium weight riders, or slightly more aggressive
  • .63 springs are 66% stiffer than stock and will be a good choice for heavier riders, or aggressive riders
  • .70 springs are 84% stiffer than stock and will be a good choice for large riders, loaded adventure bikes, very aggressive or two-up riders
Choose Spring Rate
$139.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fork Tool

DR650 '96 - '22

Keeps the damper rod from turning so you can remove the bottom fork bolt. Perfect when replacing fork seals or installing cartridge emulators. It's a good addition to any tool box as it will fit many other bikes.

$29.95

Stock suspension suffers from poor compression damping and limp rebound damping. The Race Tech Gold Valve allows you to tune both compression and rebound valving for vastly improved performance.

  • Bolt-on shock valving for serious suspension performance
  • Improves control, traction, plushness and bottoming resistance
  • Improved, long-wearing, low-friction sealing design decreases fade
  • Includes complete instructions
$179.95

Race Tech Cartridge Emulators make damper rod forks perform like well-tuned cartridge forks. Emulators are tunable valves that sit inside your forks on top of the damper rods and are held in place by the fork springs. Simple to install and completely tunable for all conditions and rider preferences.
 

$169.95

Patented inertia activated damping for damper rod front forks. This is the only product on the market designed to respond differently to the wheel moving up vs if the chassis is trying to move down. They give the best of worlds- a more stable chassis and a faster wheel response over bumps. This product will transform your front suspension.

The Intiminator sits on top of your stock damper rod, forcing the oil through high quality deflected discs found in top of the line shock absorbers. When the front tire hits a bump the inertia of that bump opens the valve instantly allowing for a faster response.

Installation is easy. Drain the fork oil, remove the spring, drop in the Intiminator, refill with 5W fork oil, then reinstall the spring.

$199.95

Cogent Dynamics starts with a CNC machined aluminum body that has a hard ceramic coating applied for durability. Each shock is assembled and tested on the Cogent Dynamics suspension dyno before being packed up and shipped. Like its bigger brother the Mojave Pro Series, this will make an incredible difference in the handling of your DR.

Select the spring you want installed based on the load you plan to carry. For riders (and gear) less than 250 pounds we recommend the 7.6 kg/mm spring. If you regularly have more than 250 pounds the bike, you might want to use the 8.15 kg/mm spring. If you have any questions at all about this, please call.

This shock package includes the CNC machined Bling Ring Preload Adjuster Collar and Preload Bearing that will make preload adjustments easy.

You may choose to add the Hydraulic Preload Adjuster to make it the easiest of all. All you do is twist the knob. Includes mounting bracket for knob unit. (Some CA carb compliant models may need slight modification for mounting the preload adjuster.)

Low shock also available. This option will lower your seat height 1" without the need for lowering links. All other features of this shock are the same as the stock height.

Please allow 2-3 weeks for delivery on hydraulic preload adjuster shocks.

Choose Spring Rate
Add Remote Preload Adjuster
$747.95

The Pro-Series shock includes an attached reservoir with adjustable compression damping. Cogent Dynamics starts with a CNC machined aluminum body that has a hard ceramic coating applied for durability. Each shock is assembled and tested on the Cogent Dynamics suspension dyno before being packed up and shipped. This shock is an amazing improvement over the stock unit.

Comes standard with the CNC machined Bling Ring Preload Adjuster Collar and a thrust bearing between the adjuster ring and the spring making preload adjustments easy.

The optional add-on Hydraulic Preload Adjuster makes it even easier to adjust the preload. Just twist the knob. Includes mounting bracket for knob unit. (See image below.)  (Some CA carb compliant models may need slight modification for mounting the preload adjuster.)

Select the spring you want installed based on the load you plan to carry. For riders (and gear) less than 250 pounds we recommend the 7.6 kg/mm spring. If you regularly have more than 250 pounds on the bike, you might want to use the 8.15 kg/mm spring.

Low shock also available. This option will lower your seat height 1" without the need for lowering links. All other features of this shock are the same as the stock height.

Custom built to order: Please allow 2-3 weeks for delivery

Choose Spring Rate
Add Remote Preload Adjuster
$1,106.95

Designed and built for Dual-Sport and Adventure bikes, the Nitron Adventure Series R1, R2 and R3 shocks offer exceptional road and trail performance. Using billet aluminum components, a large heavy-duty 16mm piston rod and a high-flow capacity 46mm piston, this shock flows much more oil for a more consistent, fade-free performance than most other shocks.

Click on the More Info link below to see the technical details of all three Nitron Adventure shocks.

Nitron shocks are custom built for your specific weight, if you have a passenger or luggage add that weight as well. Lastly your riding conditions; do you ride mainly paved roads, dirt roads, trails? Please provide a percentage of each you ride. This information is essential to the building of the shock. Enter this in the comments section of the shopping cart when you check out, or feel free to call and place your order over the phone.

Because Nitron shocks are custom built, please allow 2-3 weeks for delivery.

Choose Shock
Add Nitron Hydraulic Preload Adjuster
$750.00

The same inertia valve technology as used in the Ricor Intiminators is now available in a complete replacement rear shock. Intiminator technology gives the shock the ability to respond to load travel vs road surface changes differently. This is the only product on the market that is smart enough to know if the wheel is trying to move up or if the chassis is trying to move down, giving you the best of worlds- a more stable chassis and a faster wheel response over bumps.  Gives you a smooth controlled ride and easy installation.

This shock will transform your rear suspension.

 

Choose Option
$569.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shock Linkage Bearing Kit

DR650 '96 - '22

Complete kit to replace the bearings and seals in the DR650 shock linkage. Includes the lower shock bearing.

Add Grease
Add Shock Linkage Bearing Grease Tool
$78.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shock Seal Head Kit

DR650 '96 - '22

For a top notch rebuild or re-valve of your rear shock use this high quality replacement seal head.

  • Complete assembly, ready to install into the shock body
  • Has air bleed holes to help remove air from the oil reservoir during installation
  • Double-lip oil seal design keeps out dirt and keeps friction low
  • Kits include aluminum body, dust seal, bushing, oil seal, O-ring, internal guide bushing/washer, snap ring, and top-out bumper
$37.95

 The perfect option for the DIY'er.

The Cogent Dynamics Shock Shaft Assembly is ready for installation. The Cogent shock shaft also features an external rebound damping adjustment. Just what you need to have the ultimate in rear suspension control.

  • Requires use of your current oem spring, or you can add a spring to your purchase below.
  • Requires 5wt shock oil
$451.99

Replace the internal components in your shock with a completely updated design with adjustments for both compression and rebound damping.

The new shaft assembly has improved valving for both compression and rebound, a thicker, stronger shaft, new seal head and bottoming bumper. Comes as a complete assembly ready to go into your shock body. You can add choice of rear spring (required).

Add a bottle of 3w Shock Oil to your order so you can start your project right away.

Add Shock Oil
$499.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shock Shaft Bumper

DR650 '96 - '22

Heavy duty shock bumper. The stock bumper is prone to disintegrating with age. If you are re-valving your shock it's a good idea to be sure the bumper is in good shape.
 

$24.95

The complete shock upgrade kit - a shock spring of your choice, Race Tech Gold Valve kit, detailed instructions and a bottle of quality shock oil to complete the job. Everything you need to transform your mushy stock shock into suspension that really works.

Recommended rates:

  • Rider & gear up to 150 lb = Stock 6.5 spring
  • Rider & gear up to 200 lb = 7.5 spring
  • Rider & gear 200-275 lb = 8.3 spring
  • Rider & gear 275-350 lb = 8.6 spring
  • Rider & gear 350 lb & up = 9.6 spring
$319.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shock Spring, Performance

DR650 '96 - '22

The correct spring rate for your weight will give a smoother more controlled ride. No more bottoming and better traction and confidence off-road.

8.6 & 9.6 springs require an adapter which is included

Recommended rates:

  • Rider & gear up to 150 lb = Stock 6.5 spring
  • Rider & gear up to 200 lb = 7.5 spring
  • Rider & gear 200-275 lb = 8.3 spring
  • Rider & gear 275-350 lb = 8.6 spring
  • Rider & gear 350 lb & up = 9.6 spring
$139.95

This 'Bling Ring' replaces the two stock preload/lock rings. The ring is CNC machined aluminum with the additional thickness to provide superior support on the shock body.

The added needle bearing thrust washer will make preload adjustments much easier. The ring then spins much easier against the spring making adjustments quite a bit easier.

This part can easily be added to the Cogent or Race Tech Shock Shaft Assemblies, even after they are built.

To install the Bling Ring on a shock with a stock shaft it must either be disassembled or have the lower clevis removed.

 

$66.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shock Spring Thrust Bearing

DR650 '96 - '22

This thrust bearing is designed to sit between the shock spring and the preload adjusting nut on the shock. This bearing will eliminate spring binding during shock action and will make turning the preload collars much easier. The bearing kit includes two cupped washers, one thrust bearing and inner & outer o-rings to keep out water and dirt.

$54.95

Cogent Dynamics takes a stock DR650 shock, tears it down, cleans it up, adds a hard ceramic coating, then rebuilds it with a completely new custom shim stack that gives you excellent rear wheel control. This custom Cogent valve stack makes this shock behave much like its Shock Shaft brother above without the rebound adjustment.

Recommended spring rates:

  • Rider & gear up to 150 lb = Stock 6.5 spring
  • Rider & gear up to 200 lb = 7.5 spring
  • Rider & gear 200-275 lb = 8.3 spring
  • Rider & gear 275-350 lb = 8.6 spring
  • Rider & gear 350 lb & up = 9.6 spring

This shock includes the Bling Ring preload adjusting ring AND the Thrust Bearing! This replaces the two stock preload/lock rings. This ring is CNC machined aluminum with the additional thickness to provide superior support on the shock body.

 Please click on the link below for information on core charges and how to ship your shock to us. (If you select to add the core charge please include in the comments at checkout if store credit or refund is preferred) 

Add Shock Core Charge
$449.95

Don't want to buy a new shock? This rebuild makes the stock shock about 10 times better. We send shocks to Cogent Dynamics. They clean them up, hard anodize the bodies for better wear, and install new Shock Shaft Assemblies with rebound damping adjustment.

Any aftermarket spring for your stock shock will fit on this shock. If you are using the original spring, you will want to order a stiffer spring to go with your new shock. Our 7.5 kg/mm rear spring is 16% stiffer than the stock one and is perfect for the majority of riders. If you are a larger rider, or carry a lot of gear or a passenger (total weight exceeding 250 pounds) you will probably want the 8.3 kg/mm rear spring which is 28% stiffer than stock.

Low shock also available. This option will lower your seat height 1" without the need for lowering links. All other features of this shock are the same as the stock height.

! Please click on the link below for information on core charges and how to ship your shock to us. (If you select to add the core charge please include in the comments at checkout if store credit or refund is preferred) 

Choose Option
Add Shock Core Charge
$637.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Swingarm Bearing Kit

DR650 '96 - '22

Complete kit to replace the bearings and seals in the swingarm pivot.

Add Grease
Add Shock Linkage Bearing Grease Tool
$59.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Swingarm Pivot Caps

DR650 '96 - '22

Replacement OEM swingarm pivot covers.  Keep mud and dirt away from the swingarm bolt. Sold as a set of one left side and one right side cover.

$7.95