Frame

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Centerstand, SW-Motech

DR650 '96 - '21
Add Brake Pedal
$150.95

Greatly eases basic chain maintenance, tire changes, parking, cleaning, etc. All necessary hardware is included. Installs using basic hand tools. Tough black powder coated finish.

For riders who wish to run the centerstand and the lowered footpegs we recommend installing a Warp 9 brake pedal. The Warp 9 pedal is arched to give the necessary clearance under the pedal.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Peg Cleats, Fastway

DR650 '96 - '21
Choose Style
$24.95

Replacement Cleats for use with Fastway Pegs.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Peg Low Mounts, JNS Engineering

DR650 '96 - '21
Choose Option
$84.95

Low peg mounts from JNS Engineering. Your choice of a straight 1.5" drop or get that drop and a 1" rearward offset. You can use your stock pegs or click on one of the optional pegs that are made to fit the stock DR650 mounts.

These heavy duty steel mounts are pressed, welded and then powdercoated black for protection. Includes mounting bolts.

Note: These mounts are compatible with the SW Motech Center Stand by adding a 1/8" spacer behind the mounts.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Peg Low Mounts, Wirtz Wire

DR650 '96 - '21
Choose Type
$139.95

Low peg mounts for the DR From Wirtz Wire. These are different than our other mounts for several reasons. First, these are designed around the stock pegs. All of the pegs in this section will fit these mounts. Another difference is that these mounts are offered in a low mount as well as a low and rearward mount. These are 'wire EDM' machined from solid 1018 steel bar stock, and are not welded anywhere. They are powder coated black for a great look. Both mounts move the pegs down 2" while the low and rear mounts also move the pegs back 1.3".

Kit comes with new mounts, longer bolts and a longer brake switch spring that will be needed. Pegs are optional, your stock pegs will work.

The upper image shows the low and rearward mounts while the one below that is of the just low mounts. If you look at the two images below that, you will see that these are the low and rearward pegs for both sides of the bike.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Peg Passenger Relocation Brackets, JNS Engineering

DR650 '96 - '21
$69.95

Made from 1/8" thick stainless steel with dual folded edges for additional strength, these brackets will relocate your passenger pegs down 4" and move them back 1.5". This will give your passenger additional legroom making two-up riding much more comfortable.

All hardware is included for a quick and easy installation.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Fastway

DR650 '96 - '21
Add Foot Peg Cleats, Fastway
$274.95

Fastway offers a large ADV peg that is 4.75" long and 2.25" wide. With these pegs you can adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. These pegs come with two sets of F3 cleats (one standard, one long). You can order serrated or spiked cleats separately.

These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Warp 9 Racing

DR650 '96 - '21
Choose Color
$199.95

New from Warp 9. These top of the line Adventure pegs are 5" long and 2.5" wide. They will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a singletrack trail.

  • Ceracote coated Chromoly steel pivot for the ultimate in strength
  • Replaceable 7075 T6 Aluminum Platform
  • Permanent Stainless Teeth provide the ultimate in non-slip traction
  • Built-in bottle opener in the bottom!
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Chromoly Wide

DR650 '96 - '21
$59.95

Light weight and strong. These DRC foot pegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Evolution Air Fastway

DR650 '96 - '21
Add Foot Peg Cleats, Fastway
$199.95

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

You can also order serrated or spiked cleats separately.

These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Lowered ProCycle

DR650 '96 - '21
Choose Type
$159.95

Our complete foot peg assemblies. 1-3/4" lower than stock. No extra brackets that hang down below the frame. Easier on the knees. Wider platform Yamaha YZ style footpegs are stronger and give you firmer footing. Mount solid to the frame. No more 'droopy' feeling when standing on the stock pegs. Lowering your footpegs makes it easier to stand and less of a reach down to the bars when standing.

Now you can get our Low Pegs with MK4 Pivot Pegz or black Fastway ADV pegs (both Yamaha YZ pegs) installed!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, MK4 Pivot Pegz

DR650 '96 - '21
Add PivotPegz Toppers
$189.95

Pivot Pegz have set a new standard in footpeg performance and quality, and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

  • Mega wide 60mm platform
  • Widest and lightest pivoting pegs on the market
  • Open design = less mud packing
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Race proven design and durability

See below for extenders for these pegs to make them true ADV pegs!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Pro-Series IMS

DR650 '96 - '21
$95.95

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/2".

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar and Lowered Foot Pegs Kit

DR650 '96 - '21
Add Grip Glue
$269.95

This kit is for those of you looking for a bit more leg and arm room in the DR cockpit. Included are ProCycle Low Foot Pegs and our oversize bars.

  • ProCycle Low Pegs will drop your pegs by 1-3/4" and include wider MX style pegs that are much more comfortable when standing.
  • These are not only taller bars, but 1-1/8" at the clamp area for additional strength. They taper down to 7/8" on the ends so all the stock controls fit. Black in color.
  • 1 1/8" Warp 9 clamps that raise the handlebar 1".
  • A new billet aluminum throttle tube is included.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Side Stand Foot Pad, JNS Engineering

DR650 '96 - '21
Choose Type
$16.95

Your choice of an aluminum bolt-on foot pad or a steel weld-on unit. Each will make the footprint of the stock side stand considerably larger, preventing your DR from tipping over in soft terrain. The bolt-on unit is cut from aluminum and then powder coated black, it comes with stainless steel mounting hardware.

The bolt-on pad and does require use of a drill for installation. The weld-on pad will need to be welded to the stand and then the entire unit painted for corrosion protection. All JNS products come with a lifetime warranty against defects in materials and workmanship.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Side Stand Hardware Kit

DR650 '96 - '21
Choose Kit
$11.95

If you are replacing you side stand you will want to check the hardware. Over the years they can take a beating. You can order just a new Suzuki nut and bolt #4 and #5 in the picture. Or if the springs are lost or broke they are included in the full kit that includes #4, #5, #2, and #3.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Side Stand, Short

DR650 '96 - '21
$59.95

For the DR650 that has been lowered or converted with supermoto wheels. This stand is 1.5" (40mm) shorter than the stock unit.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Steering Head Bearing Kit

DR650 '96 - '21
Add Grease
$39.95

Tapered roller bearings provide decreased maintenance, less wear, smoother operation and longer life.

This set of high quality replacement steering stem bearings includes:

  • Upper and lower tapered bearings
  • Upper and lower bearing races
  • Upper and lower seals
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Tank Cushions & Hardware, Rear

DR650 '96 - '21
$19.95

Have your tank cushions worn out over the years? Have you lost one or more while working on your bike? We have new upper and lower tank cushion rubbers.

This kit also includes the original hardware (not pictured)