Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.

Frame

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Center Stand, SW-Motech

T7 Ténéré 700 '20 - '22

The SW-MOTECH center stand for your Yamaha Tenere 700 increases the versatility of your machine for more secure parking on various terrain while enhancing ease of maintenance. Robust steel construction provides sturdy support for the motorcycle and is powder coated black for enhanced durability and corrosion resistance. This high quality center stand is designed and engineered in Germany for seamless integration with the factory original components and easy operation utilizing a built in foot lever which increases leverage and decreases lifting effort.

 

Features:

  • Robust steel construction
  • Attractive powder coated black finish adds corrosion resistance & durability
  • Improves parking stability and versatility on various surfaces
  • Significantly reduces the risk of a tip over when used on softer terrain vs side stand
  • Integrates perfectly with the factory original components
  • Easy to use German design uses leverage to make lifting a cinch
  • Foot lever increases leverage to aid in lifting technique
  • Does not require cutting, drilling or any other permanent modifications
  • Allows on the road maintenance without a paddock stand
  • Eases chain and tire maintenance
  • Double retention spring ensures safe operation even if one spring fails
$245.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Centerstand, SW-Motech

V-Strom (DL650) '04 - '11

The must-have accessory for adventure-touring. Greatly eases basic chain maintenance, tire changes, parking, and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and side stand components - retain all existing features without sacrificing lean angle or clearances.

All hardware needed to mount the centerstand included. Typically installs using basic hand tools. No welding, cutting, or drilling of existing frame or body parts required. Tough black powdercoated finish with some gray fittings or hardware as applicable. A double-retention spring is included as a safety feature to prevent the centerstand from contacting pavement if one of the two springs should fail during a ride. Designed to work with OEM components -- we cannot assure fit with aftermarket exhausts or other accessories.

  • Ground clearance & cornering clearance problems
  • Difficulty in lifting the lowered bike onto the centerstand
Thumbnail

 Special order item – please allow extra time for delivery.

Choose Year and Model
$245.95

Centerstand, SW-Motech

Africa Twin (CRF1000L) '16 - '22

The SW-Motech Centerstand is something that should be an OEM item. Essential for flat tire repairs, tire changes, chain maintenance, oil changes, loading/unloading luggage and many other day-to-day maintenance operations.

Integration with OEM exhaust and sidestand is exceptional. The extended foot lever maximizes leverage making for easy elevation of your Twin. There are no penalties in clearance for these benefits. Tubular steel construction with a heavy-duty black powder coat provides for a stable foundation for supporting your motorcycle. No sacrifices were made to the performance or clearance of the Twin.

Installation is a simple bolt-on procedure; no drilling, cutting, welding or relocating other components for fitment. Package includes all necessary mounting hardware and detailed instructions.

Please Note that the Centerstand works perfectly with the Skid Plate Extension.

Add Skid Plate Extension
$245.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Centerstand, SW-Motech

DR650 '96 - '22

Greatly eases basic chain maintenance, tire changes, parking, cleaning, etc. All necessary hardware is included. Installs using basic hand tools. Tough black powder coated finish.

For riders who wish to run the centerstand and the lowered footpegs we recommend installing a Warp 9 brake pedal. The Warp 9 pedal is arched to give the necessary clearance under the pedal.

Add Brake Pedal
$150.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Centerstand, SW-Motech Gen 2

KLR650 '08 - '18

The SW-Motech centerstand has been improved with a long foot lever to help get your beast up on this stand. Whether it be fixing a flat on the trail or just lubing your chain in the garage, nothing like a centerstand. Bound to pay for itself in saved time very shortly.

$214.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pad, Replacement Puig

CB500X '13 - '22

These are replacement rubber inserts for the Puig Enduro footpegs. Sold as a pair.

$13.63
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Peg Adapters, Puig

CB500X '13 - '22

These footpeg heads are bike model specific and are required to install Puig footpegs to your bike. 

  • Allow for custom positioning of your new Puig footpegs
  • Sturdy construction
$34.22
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Peg Cleats, Fastway

KLR650 '87 - '18 DR650 '96 - '22

Replacement Cleats for use with Fastway Pegs.

Choose Style
$27.95

Inexpensive way of getting the factory look.  Adds 1/2" of width to any standard foot peg. These will give you a much more stable platform when standing on the pegs.

Sold in pairs.

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Peg Low Mounts, JNS Engineering

DR350SE '94 - '99 DR350S '90 - '93 DR350 '90 - '99

These low peg mounts will drop your foot pegs 1.0″ and 0.5″ shift to the rear for a much more comfortable riding position, especially for taller riders.

Unlike relocation plates, these mounts do not hang dangerously below the frame.

You can mount stock or aftermarket pegs and they are compatible with the kick starter.

$119.95

Low peg mounts from JNS Engineering. Your choice of a straight 1.5" drop or get that drop and a 1" rearward offset. You can use your stock pegs or click on one of the optional pegs that are made to fit the stock DR650 mounts.

These heavy duty steel mounts are pressed, welded and then powdercoated black for protection. Includes mounting bolts.

Note: These mounts are compatible with the SW Motech Center Stand by adding a 1/8" spacer behind the mounts.

Choose Option
$84.95

These mounts provide a 1.0″ drop and 1.0″ shift to the rear which lowers your center of gravity and puts you in a better position of control especially when standing.

They are precision fabricated in Oregon and come with a lifetime warranty. The icing on the cake, they are 0.5 pounds lighter than the factory peg mounts.

$69.95

These low peg mounts will drop your footpegs 1.5" and move them to the rear 1" for a much more comfortable riding position, especially for taller riders. Unlike relocation plates, these mounts do not hang dangerously below the frame. You can mount stock or aftermarket pegs and they are compatible with all skid plates, crash bars, and center stands.

New 10.9 high strength mounting bolts are included. Once installed the foot controls will need adjustment and the brake switch spring will need to be slightly modified.

All JNS products come with a lifetime warranty against defects in materials and workmanship.

$84.95

Low peg mounts for the DR From Wirtz Wire. These are different than our other mounts for several reasons. First, these are designed around the stock pegs. All of the pegs in this section will fit these mounts. Another difference is that these mounts are offered in a low mount as well as a low and rearward mount. These are 'wire EDM' machined from solid 1018 steel bar stock, and are not welded anywhere. They are powder coated black for a great look. Both mounts move the pegs down 2" while the low and rear mounts also move the pegs back 1.3".

Kit comes with new mounts, longer bolts and a longer brake switch spring that will be needed. Pegs are optional, your stock pegs will work.

The upper image shows the low and rearward mounts while the one below that is of the just low mounts. If you look at the two images below that, you will see that these are the low and rearward pegs for both sides of the bike.

Choose Type
$139.95

Made from 1/8" thick stainless steel with dual folded edges for additional strength, these brackets will relocate your passenger pegs down 4" and move them back 1.5". This will give your passenger additional legroom making two-up riding much more comfortable.

All hardware is included for a quick and easy installation.

$69.95

Not your average rubber insert! These rubber covers go over the top of your MK3 or MK4 Pivot Pegz so that the aggressive teeth are only exposed when you need them in muddy conditions.

  • Unique, innovative design
  • Wide flat platform
  • Openings allow mud/dirt to pass through
  • Easy and quick to get on/off
  • Good grip
  • Reduced vibration
  • Extra comfort

Important to verify which style Pivot Pegz you have before ordering.

Choose Peg Style
$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Peg Toppers, SW-Motech

Africa Twin (CRF1000L) '16 - '22

Like most machines, the OEM pegs on the Africa Twin are for the birds. They are small and provide a minimalist platform to control the motorcycle and they are uncomfortable if you stand on them for very long. You can install new, larger pegs or you can bolt on these beautiful aluminum extenders on top of the stock units. You can see the stock peg inside the topper in the upper image.

If you stand for very long these pegs will pay for themselves quickly. CNC machined with slightly rounded edges on the teeth so they won't eat up the soles of your boots, then anodized black, these are pretty and functional. 2.32" x 3.38" is nearly double the contact area of the stock pegs. Mounting hardware and detailed instructions are included, making installation a snap.

$122.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Adjustable SW-Motech

Africa Twin (CRF1000L) '16 - '22

The cleated surface of the SW Motech On-Road Off-Road convertible foot pegs for the Africa Twin will help keep your feet planted while tackling tough terrain in tricky wet and muddy conditions. Easily removable rubber pads dampen road vibration and prolong the life of your favorite boots on those long road sections between trails.

Two mounting heights (15 mm apart) allow you to tailor the riding position you desire for maximum comfort and control. A large 86mm x 56mm footrest contact area (cleated or rubber) make them comfortable whether sitting or standing. Designed to excel on dirt as well as asphalt, these pegs will give you the edge or the comfort you need on your next adventure.

$144.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Adventure Fastway

950 Adventure '03 - '06 990 Adventure '07 - '13

This is the ultimate adventure bike platform, it measures 2.25" wide, 4.75" long.

Patented adjustable collars make it easy to run them in the 'standard' or 'low boy' positions on most bikes.

Gain more room for bulky boots, or for longer legs. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. Kamber bolts lets you adjust the 'tilt' of your pegs to increase comfort, or to give better squeeze on your bike.

$274.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Fastway

WR250R '08 - '18 WR250X '08 - '11

Finally, the ultimate Adventure peg, from the folks at Fastway - Pro Moto Billet. This peg is big enough to stand on all day with no fatigue, it measures 2.25" front to back and is 4.75" wide.

In addition to the big size, you can also adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. You can further customize them with 3 styles of patented adjustable threaded cleats. Take your traction from comfortable to gnarly. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. You can also order serrated (F5 - bottom left image) or spiked (F6 - bottom right image) cleats separately.

These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.

Choose Color
Add Foot Peg Cleats, Fastway
$274.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Fastway

T7 Ténéré 700 '21 - '22

This is the ultimate adventure bike platform, it measures 2.25" wide, 4.75" long.

Patented adjustable collars make it easy to run them in the stock or lowered positions on most bikes.

Gain more room for bulky boots, or for longer legs. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. Kamber bolts lets you adjust the 'tilt' of your pegs to increase comfort, or to give better squeeze on your bike.

Kit includes required fit kit.

Thumbnail

  Temporarily out of stock, No current available ETA.  Ordering now will reserve yours.

$274.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Fastway

KLR650 '87 - '18

The ultimate Adventure peg, from the folks at Fastway - Pro Moto Billet. This peg is big enough to stand on all day with no fatigue, it measures 2.25" front to back and is 4.75" wide.

In addition to the big size, you can also adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. You can further customize them with 3 styles of patented adjustable threaded cleats. Take your traction from comfortable to gnarly. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long.

These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.

Mounting these pegs to your KLR takes just a bit of work.

Please see link to the instructions below. These apply to the ADV and Evolution AIR Peg as well as the Evolution II pegs referred to in the instructions.

Add Foot Peg Cleats, Fastway
$274.95

Fastway offers a large ADV peg that is 4.75" long and 2.25" wide. With these pegs you can adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. These pegs come with two sets of F3 cleats (one standard, one long). You can order serrated or spiked cleats separately.

These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.

Add Foot Peg Cleats, Fastway
$274.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Warp 9 Racing

950 Adventure '03 - '06 990 Adventure '07 - '13

New from Warp 9, top of the line Adventure Pegs. a full 5" long and 2.5" wide will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a singletrack trail.

  • Ceracote coated Chromoly steel pivot for the ultimate in strength
  • Replaceable 7075 T6 Aluminum Platform
  • Permanent Stainless Teeth provide the ultimate in non-slip traction
  • Built-in bottle opener in the bottom!
$199.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Warp 9 Racing

DR650 '96 - '20 DR350S '90 - '99 DR350 '90 - '99 DR350SE '94 - '99

New from Warp 9. These top of the line Adventure pegs are 5" long and 2.5" wide. They will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a singletrack trail.

  • Ceracote coated Chromoly steel pivot for the ultimate in strength
  • Replaceable 7075 T6 Aluminum Platform
  • Permanent Stainless Teeth provide the ultimate in non-slip traction
  • Built-in bottle opener in the bottom!

*Does not fit 2021 DR650

Choose Color
$199.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Warp 9 Racing

DRZ400 '00 - '03 DRZ400S '00 - '17 DRZ400SM '05 - '17 DRZ400E '00 - '07

New from Warp 9, top of the line Adventure Pegs. a full 5" long and 2.5" wide will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a single track trail.

    Ceracote coated Chromoly steel pivot for the ultimate in strength
    Replaceable 7075 T6 Aluminum Platform
    Permanent Stainless Teeth provide the ultimate in non-slip traction
    Built-in bottle opener in the bottom!

Thumbnail

 NOTE: These pegs DO NOT fit the '18 model!

Select Color
$199.95

Warp 9's  top of the line Adventure Pegs. a full 4" long and 2.5" wide will give your feet the perfect perch whether you are cruising down the highway or standing up.

  • Ceracote coated Chromoly steel pivot for the ultimate in strength
  • Replaceable 7075 T6 Aluminum Platform
  • Permanent Stainless Teeth provide the ultimate in non-slip traction
  • Built-in bottle opener in the bottom
$199.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Aluminum ZETA

CRF250L '12 - '20 CR125 '02 - '07 CR250 '02 - '07 CRF150R '07 - '22 CRF250R '04 - '22 CRF450R '02 - '22 CRF250X '04 - '17 CRF450X '05 - '19 CRF250L Rally '17 - '20 Africa Twin (CRF1000L) '18 - '19 CRF250R '19 - '19 CRF450R '17 - '22 CRF300L '21 - '22 CRF300L Rally '21 - '22

Replace those narrow heavy OEM foot pegs with the ZETA Racing aluminum foot pegs.  When you are on your dirt bike a stable platform when riding is important.  The aluminum foot pegs offer a wider platform and the spikes offer more traction for your foot preventing you from slipping.  Over all it offers more control on your bike.  Made from CNC machined A2014 forged aluminum and stainless pins.

Choose Color
$104.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Chromoly Wide

WR250R '08 - '18 WR250X '08 - '11

Light weight and strong. These DRC foot pegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.

$54.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Chromoly Wide

TTR125 '00 - '22 DR650 '96 - '22 DR350S '90 - '93 DR350SE '94 - '99 DR350 '90 - '99 XT250 '13 - '22 KLX125 '10 - '16

Light weight and strong. These DRC foot pegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.

$59.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Enduro Puig

CB500X '13 - '22

The Puig Enduro footpegs are designed to for comfort and thanks to the removable rubber pad, they also provide exceptional grip when traversing rugged terrain.  These footpegs are wider and more robust than the factory footpegs.

  • Width 2 3/8" x length 3 3/4"
  • Hard anodized aluminum
Add Required Adapters
$119.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Evolution Air Fastway

WR250R '08 - '18 WR250X '08 - '11

The new Fastway Evolution AIR footpegs are now the ultimate pegs in the Universe.

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

You can also order serrated or spiked cleats separately. See images.

These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.

Choose Color
Add Foot Peg Cleats, Fastway
$199.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Evolution Air Fastway

950 Adventure '03 - '06 990 Adventure '07 - '13

The new Fastway Evolution AIR foot pegs are now the ultimate pegs in the Universe.

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way.

Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

$199.95

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

You can also order serrated or spiked cleats separately.

These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.

Add Foot Peg Cleats, Fastway
$199.95

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.

Mounting these pegs to your KLR takes just a bit of work. Please see link to instructions below to see what you will need to do. These instructions apply to the ADV and Evolution AIR Peg as well as the Evolution II pegs listed on the instructions.

$199.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Evolution Air Fastway

Africa Twin (CRF1000L) '16 - '22

Pegs that are designed for real adventure, providing a level of comfort not seen with other pegs. 2.25" by 3.5" makes for a platform that you can stand on for long periods with no worries. All necessary parts included for a direct bolt-on application.

Available in a beautiful anodized black or clear aluminum for durability and protection from the elements.

Choose Color
$199.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

Foot Pegs, Lowered ProCycle

DR650 '96 - '22

Our complete foot peg assemblies. 1-3/4" lower than stock. No extra brackets that hang down below the frame. Easier on the knees. Wider platform Yamaha YZ style footpegs are stronger and give you firmer footing. Mount solid to the frame. No more 'droopy' feeling when standing on the stock pegs. Lowering your footpegs makes it easier to stand and less of a reach down to the bars when standing.

Now you can get our Low Pegs with MK4 Pivot Pegz or black Fastway ADV pegs (both Yamaha YZ pegs) installed!

Choose Type
$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, MK3 Pivot Pegz

KLR650 '87 - '18

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 3 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 3 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!

  • Mega wide 60mm platform
  • Widest and lightest pivoting pegs on the market
  • Open design = less mud packing
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Race proven design and durability
Add PivotPegz Toppers
$165.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, MK4 60mm Pivot Pegz

Himalayan 411 '18 - '22

New MK4 Pivot Pegz

World's #1 high performance pivoting foot pegs.

Used by tens of thousands of riders worldwide.

Features:

  • Extra-wide 60mm platform
  • Heavy duty, long life springs
  • Unique multi-directional grip pattern
  • High grip tooth pattern
  • Outstanding build quality
  • Aerospace grade stainless steel
  • Double heat treated and electro-polished
  • Lifetime warranty
  • Made in Australia

Benefits:

  • Enhanced bike feel
  • Better bike control
  • Smoother body weight transfer
  • Reduced body jarring
  • Better balance and traction
  • Reduced fatigue
  • Easier gear shifts and rear brake access
  • Extended boot life
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, MK4 Pivot Pegz

T7 Ténéré 700 '21 - '22

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty. Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever! 

  • Wider, lighter, stronger design
  • Widest (mm) and lightest pivoting pegs on the market
  • Upgraded heavy duty, long life springs
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Expanded motorcycle fitment range
  • Overhaul kit includes: 2 pivot bushings, 2 pivot tension springs, 2 lock nuts, 2 washers, 6 o-rings, 2 split pins and instructions
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, MK4 Pivot Pegz

DR650 '96 - '22

Pivot Pegz have set a new standard in footpeg performance and quality, and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

  • Mega wide 60mm platform
  • Widest and lightest pivoting pegs on the market
  • Open design = less mud packing
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Race proven design and durability

See below for extenders for these pegs to make them true ADV pegs!

Add PivotPegz Toppers
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, MK4 Pivot Pegz

CRF250L '13 - '20 CRF250L Rally '17 - '20 CRF300L '21 - '22 CRF300L Rally '21 - '22

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

  • Mega wide 60mm platform x 100mm long, overall approx length from center of footpeg pin to end of peg is 115mm
  • Widest and lightest pivoting pegs on the market
  • Open design = less mud packing
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Race proven design and durability
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, MK4 Pivot Pegz

DRZ400 '00 - '03 DRZ400SM '05 - '18 DRZ400E '00 - '07 DRZ400S '00 - '18

Pivot Pegz have set a new standard in foot peg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best foot pegs in the world and they really do perform as good as they look. There's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

    Mega wide 60mm platform
    Widest and lightest pivoting pegs on the market
    Open design = less mud packing
    Unique multi-directional grip pattern
    Outstanding build quality
    Race proven design and durability

Add PivotPegz Toppers
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, MK4 Pivot Pegz

950 Adventure '03 - '06 990 Adventure '07 - '13

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

    Wide 60mm platform
    Widest and lightest pivoting pegs on the market
    Open design = less mud packing
    Unique multi-directional grip pattern
    Outstanding build quality
    Race proven design and durability

 

Choose Option
Add PivotPegz Toppers
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, MK4 Pivot Pegz

WR250R '08 - '18 WR250X '08 - '11

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

  • Mega wide 60mm platform
  • Widest and lightest pivoting pegs on the market
  • Open design = less mud packing
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Race proven design and durability
Add PivotPegz Toppers
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, MK4 Pivot Pegz

XR650L '93 - '22

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty. Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!

  • Wider, lighter, stronger design
  • Widest (mm) and lightest pivoting pegs on the market
  • Upgraded heavy duty, long life springs
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Lifetime Warranty*
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, MK4 Pivot Pegz

Africa Twin (CRF1000L) '16 - '22

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

  • Mega wide 60mm platform
  • Widest and lightest pivoting pegs on the market
  • Open design = less mud packing
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Race proven design and durability

 

Add PivotPegz Toppers
$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Oversize SW-Motech

V-Strom (DL650) '04 - '16 V-Strom (DL1000) '14 - '16

These pegs from SW Motech are a very cost effective way of getting a much larger footpeg than stock under your feet (2" by 3"). The removable and replaceable rubber cover is a another great feature. It helps isolate vibrations through your feet on those long highway jaunts but you can remove it in a few minutes when you get into slippery conditions that require better traction. Last but not least, you can change position a full 15mm. Two mount holes where the peg bolts to the mount allow that much adjustability. Entire peg mounts right up to your stock frame foot peg mount, no modifications necessary.

The pegs are made out of stainless steel and attach to a CNC machined aluminum bracket that goes into your stock mounts on your DL. These can replace your worn out stock pegs, give you a rubber peg when needed and a serrated edge when needed and look great doing it, what more could you ask for?

Thumbnail

  Special order item – please allow 2-3 weeks for delivery. Once ordered, cannot be cancelled or returned.

$121.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Oversized MX Warp 9 Racing

CRF250L '12 - '20 CRF250L Rally '17 - '20 CRF450L '19 - '22 CRF300L '21 - '22 CRF300L Rally '21 - '22

Aftermarket foot pegs from our friends at Warp 9. Made from light weight T-6 aluminum and stainless steel teeth. These have an extra wide platform as well as the Exclusive "X" bridge that adds 2 center teeth for added grip

 

$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Pro-Series IMS

CR125 '02 - '07 CR250 '02 - '07 CRF250R '04 - '22 CRF450R '02 - '22 CRF250L '13 - '22 CRF250L Rally '17 - '22 CRF450L '19 - '22 CRF450X '05 - '17

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

Choose Fitment
$105.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Super Stock IMS

XR650L '93 - '22 XR250R '96 - '04 XR400R '96 - '04

Wider foot pegs for sure-footed comfort. Cast stainless steel.

$89.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Super Stock IMS

TW200 '87 - '22

Bottom image shows the Super Stock peg next to the stock bird perch.

  • Wider than stock for sure-footed comfort
  • Cast from Stainless Steel - not welded
  • Serrated for positive footing, but points are rounded for safety
$89.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Super Stock IMS

DR650 '96 - '22 DR350S '90 - '93 DR350SE '94 - '99 DR350 '90 - '99

Wider foot pegs for sure-footed comfort. Cast stainless steel.

$89.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Foot Pegs, Wide DRC

CRF250L '13 - '22 CRF250L Rally '17 - '22 CRF250R '04 - '22 CRF250X '04 - '22 CRF450R '02 - '22 CRF450X '02 - '22 CRF150R '07 - '22 CR125 '02 - '07 CR250 '02 - '07

Made from chromium molybdenum steel for extreme durability. Available in 50mm and 57mm. Black powder coating finish.

Choose Width
$54.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Foot Pegs, Wide ProCycle

TW200 '87 - '22

This kit combines common wide platform Yamaha YZ/WR foot pegs with brackets that are custom made to fit the TW200. If you are tired of standing on the stock skinny footpegs, get yourself a set of these fat boys and have pegs that match the tires on your T-Dub! For ultimate comfort, order the Pivot Pegz kit!

Simply unbolt your stock brackets and bolt these in their place. The bracket on the right side (brake lever side) is shorter than stock to correct the offset in the stock pegs. On kickstart models, the stroke of the kickstart lever is shortened slightly. Should you ever need to replace the pegs in the future, simply order pegs for the Yamaha YZ or WR 250/450.

Choose Pegs
$289.95

This kit is for those of you looking for a bit more leg and arm room in the DR cockpit. Included are ProCycle Low Foot Pegs and our oversize bars.

  • ProCycle Low Pegs will drop your pegs by 1-3/4" and include wider MX style pegs that are much more comfortable when standing.
  • These are not only taller bars, but 1-1/8" at the clamp area for additional strength. They taper down to 7/8" on the ends so all the stock controls fit. Black in color.
  • 1 1/8" Warp 9 clamps that raise the handlebar 1".
  • A new billet aluminum throttle tube is included.
Add Grip Glue
$289.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Side Stand, Adjustable

KLR650 '09 - '18

A billet aluminum side-stand from PSR. This is the side-stand you want when you are using lowering-links.

Has many height settings from stock to 2" lower, a must have when lowering your bike.  Available in anodized black.

$139.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Side Stand Adjustable, PSR

CB500X '13 - '18
  • CNC-machined for a perfect fitment
  • Features adjustable settings to complement the lowering links
$139.95

Your choice of an aluminum bolt-on foot pad or a steel weld-on unit. Each will make the footprint of the stock side stand considerably larger, preventing your DR from tipping over in soft terrain. The bolt-on unit is cut from aluminum and then powder coated black, it comes with stainless steel mounting hardware.

The bolt-on pad and does require use of a drill for installation. The weld-on pad will need to be welded to the stand and then the entire unit painted for corrosion protection. All JNS products come with a lifetime warranty against defects in materials and workmanship.

 

Choose Type
$16.95

Double the size of your side stand footprint and half the chances of your KLR tipping over when parked on soft terrain. This laser cut, TIG welded 0.190" thick slice of aluminum bolts to your machine with just the addition of a hole in the stock side stand pad. Just takes minutes to mount. All JNS products come with a lifetime warranty against defects in materials and workmanship.

Choose Year
$26.95

Double the size of your side stand footprint and half the chances of your XR650L tipping over when parked on soft terrain. This laser cut, TIG welded 0.190" thick slice of aluminum bolts to your machine with just the addition of a hole in the stock side stand pad. Just takes minutes to mount! All hardware provided, and all JNS products come with a lifetime warranty against defects in materials and workmanship!

$33.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Side Stand Hardware Kit

DR650 '96 - '22

If you are replacing you side stand you will want to check the hardware. Over the years they can take a beating. You can order just a new Suzuki nut and bolt #4 and #5 in the picture. Or if the springs are lost or broke they are included in the full kit that includes #4, #5, #2, and #3.

Choose Kit
$11.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Side Stand, Short

DR650 '96 - '22

For the DR650 that has been lowered or converted with supermoto wheels. This stand is 1.5" (40mm) shorter than the stock unit.

$87.95

Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and sidestand components -- retain all existing features without sacrificing lean angle or clearances.

$59.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Steering Head Bearing Kit

DR200 '96 - '22 KLX250S '08 - '14

Tapered roller bearings provide decreased maintenance, less wear, smoother operation and longer life.

This set of high quality replacement steering stem bearings includes:

  • Upper and lower tapered bearings
  • Upper and lower bearing races
  • Upper and lower seals
Choose Model and Year
Add Grease
$39.95

The easy way to remove your steering bearings without damaging them. Remove all tapered bearing races from 47mm to 52mm OD. Tool uses a precision machined anodized aluminum cup that will not damage the seal surface while hardened steel jaws securely engage the inner lip and pulls the race out perfectly straight causing no damage to the race or frame. Motion Pro includes a limited lifetime warranty.

Thumbnail

Temporarily out of stock, no current available ETA.  Ordering now will reserve yours.

$64.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Steering Stem Bearing Kit

XT250 '08 - '22
  • Comes with upper and lower bearings with races and lower seal
  • All kits come with tapered roller bearings
  • A performance upgrade for stock bikes that use loose ball bearings
$30.95
  • Designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings (where ball-type bearings are used by the OEM)
  • Designed as a replacement taper bearing seat (where taper bearings are original equipment)
  • Kits come complete with both upper and lower taper bearing cups and cones and seals (both top and bottom seals are included in most kits)
  • Tapered roller bearings decrease maintenance along with less wear and longer life
$36.95

These support arms are constructed of 1/4" steel flat stock to offer additional support for the notoriously soft XR650L sub-frame. Bolt-on strength. No cutting, drilling or welding required to install these arms. Designed to increase the strength of the rear sub-frame of the Honda XR650L for use with side cases and top cases.

Thumbnail

These support arms are designed to work with the STOCK OEM HONDA EXHAUST ONLY. This part will not work with the FMF Q4 exhaust system or Supertrapp Racing Series Exhaust without modifications.

$48.95

A very popular modification. Eliminates the weaker 2 bolt setup in favor of one bolt all the way through for the upper subframe attach point. No more worry about keeping the bolts tight, or the original bolts breaking. Select your kit in the options area. If you have the SW Motech or Tusk crash guards you want this kit for sure.

Choose Type
$24.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Swingarm Bearing Kit

TW200 '87 - '22

High Quality Replacement Swingarm Bearings and Seals for your TW200.

Add Grease
$48.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Swingarm Bearing Kit

CRF150R '07 - '18
  • Rebuild kit bearings are made using 52100 bearing steel
  • Kits include all the bearings, seals, shafts, and spacers required for a complete rebuild
$54.95

Have your tank cushions worn out over the years? Have you lost one or more while working on your bike? We have new upper and lower tank cushion rubbers.

This kit also includes the original hardware (not pictured)

$19.95