This Super Siphon has a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.
The DR200 is a small Dual-sport offering from Suzuki. The DR200 is powered by a 199cc, air/oil cooled single cylinder four stroke engine similar to the DR650. Helping drive this bike is a 5 speed transmission & multi-disk wet clutch. This bike has a wet weight of only 276lbs.
Chain Size: | Front Sprocket: | Rear Sprocket: | Front Tire: | Rear Tire: | Spark Plug: |
520x112 | 15T | 45T | 70/100-21 |
100/100-18 ('86-'88) 100/90-18 ('96-Cur) |
D8EA |
Tools
Made from precision-drawn, chrome-vanadium tool steel, the BikeMaster® 9-Piece Ball End Hex Wrench Set and Holder features a bead-blasted surface for a better grip and a corrosion-resistant coating. They have a ball end, allowing an angled reach and access to obscured bolts. It comes with a durable holder and manufacturer's lifetime warranty.
Comes with sizes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm
This Motion Pro tool pulls bearing out of those blind holes in engine cases etc. Set includes 30, 25, 20, 17, 15, 12, 10 and 8mm collets. 2 pound slide hammer. Crossbar type shaft allows easy collet removal. Necessary tool for most transmission rebuilds. Can be used for wheel bearing removal.
Combines wrench and bleeder valve into one convenient and compact tool
- Fits most 8 mm bleeder nipples
- Bleeds brake systems and hydraulic clutch systems
- Internal check valve for fast easy bleeding
- Anodized billet aluminum handle with chrome moly steel body
- Compact size for tight spaces
- High quality internal seal
- Multi position handle
Keep your cables lubed up and working freely, with Motion Pro's Cable Luber. This tool is used to inject lubricant into any cable housing. Clamps over housing and cable allowing an aerosol can with nozzle to be connected. Once the lubrication solution runs out the far end, the cable is lubricated.
A handy pocket size slide calculator from Mikuni to help you calculate jetting changes due to temperature and elevation changes. Will work for single and multiple cylinder machines whether 2 or 4 stroke. Also includes a guide for determining rich or lean conditions.
96 page 5th Edition Sudco Mikuni Carburetor Manual featuring the complete line of Mikuni RM, VM, HSR, HS, TM, TMX and BN Carburetors and Fuel Pumps with Parts Breakdown Diagrams, available Tuning Components, Tuning and Setup information of all Mikuni Carburetors & Fuel Pumps for Dirt, Street and Personal Watercraft applications.
Great resource for the do it your self rider to get the most out your carburetor.
- Accurately and quickly measures chain slack
- Two scales measure both chain slack and chain to swingarm clearance
- Setting chain slack properly dramatically improves chain life
- Lightweight compact design fits easily in your tool box or road kit
- Works on most street and dirt bike applications up to 75mm chain slack
- Made from engineered nylon with aluminum measuring scale
- Anodized laser-etched precision measuring scale
- Refer to your owner's manual for proper chain slack and procedure
- Patent pending
Can break or rivet chains from #35 to #530 like a pro.
kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.
kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.
NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.
Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.
The head of the pivot pin you are going to remove must be ground down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!
This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance and life of the chain, sprockets, and the engine. This brush will fit any 400 or 500 series chains.
- PBR = press, break, rivet
- Innovative design will press, break and rivet 520, 525 and 530 chains with one convenient tool (not for use on 428 chains)
- Versatile design will remove chain pins, press master-link plates and rivet hollow nose and soft nose (quad stake) master link pins on O-Ring and non O-Ring type chains
- Easy-to-use design allows you to change tool functions by simply moving the position of the anvil block
- Indexing letters on movable anvil and body ensures correct tool configuration; simply line up the letter on the anvil to the letter on the body to get the configuration you need
- All components conveniently store on tool when not in use
- All steel construction with heat-treated components for strength and durability
- May be supported in a vise or held with included handle
- Great for the professional technician or DIY mechanic
- Compact and light enough to carry in a tool bag for trail-side repairs
- Patent Pending
Features:
- Versatile, light and super compact chain tool for adventure touring and long distance trail riding
- 6061 billet aluminum body, complete tool weighs only 230 grams (8 oz)
- Will break 520, 525, and most 530 chains and master links (maximum link width of 20 mm)
- Included steel press plate for removing and installing clip style press-on master link plates
- Innovative dovetail closure provides ease of use and superior strength
- Hardened steel thread insert on body provides strength and durability
- Includes durable cloth pouch for easy transport on your adventure
- Requires use of a 12 mm and 14 mm wrenches (not included)
- Does not rivet master links.
- We recommend using the Motion Pro PBR Chain Tool if you have a rivet style master link
This bright and compact 6-LED flashlight plugs right into your SAE battery charging socket for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. It features a 40 inch cord so you can see in those out of the way places when you need to.
This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.
Need to remove your clutch assembly to get at that dreaded neutral safety switch? This holder is the quickest and easiest tool out there to get a grip on that hard to handle hub. Laser cut to the exact pattern that EBC makes their clutch plates from, it makes loosening and re-tightening the clutch nut easy. All of that and no worries about doing any damage to your expensive clutch hub.
Originally developed for premixing 2 stroke fuel, the Ratio Rite is a must have for EVERY shop.
Calibrations also include oz., c.c.’s and pints on the opposite side for transmission oil, fork oil, engine oil, etc.
Total capacity: 24oz
Includes storage lid
- No figuring
- No guessing
- No mistakes
- Use this tool to check and adjust the oil level on conventional and single chamber cartridge forks
- Adjustable ring will measure oil levels from 0 to 300 mm in 5 mm increments
- Syringe has a capacity of 60 ml
- New plunger head design features two fluorocarbon elastomer X-Ring seals that provide superior sealing and chemical resistance
- Billet aluminum plunger knob with durable black anodized finish
- New plunger head design allows easy cleaning and replacement of seals
Features:
- Two tools in one. One end is used to loosen stuck hose, the other end assists in pulling the hose off the fitting
- Reduces the possibility of damage to hoses and related components
- Lock nut at base of each tip allows 360 degree adjustment or removal of one tip for use in tight spaces
- Compact aluminum handle provides solid grip and excellent control
- High-quality steel tips with durable black oxide coating
The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws and are easy to strip if you are using a regular Phillips screwdriver.
Here is a little kit that will make removing and replacing JIS screws much easier. Includes 2 each of JIS No. 1, No. 2 and No. 3 bits.
These will work in other bit holders and have a mild magnetic tip.
The GCAG handles are comfortable to pull so whoever is helping will pull harder, and they are soft against your fender so you won't have any annoying bouncing, noise, or graphics damage.
GCAG dirt bike lift strap handles are constructed of 1" thin nylon webbing with flat stainless steel tri-glides for attachment. The grip section is built with 1" climb-spec tubular nylon webbing and a comfort grip handle.
Features:
- Quick tool-less install
- Stainless steel hardware (no metal contacts your fork tubes)
- Comfort Grip Handle
- Fits any bike
Maintain your chain or sprocket, even change your rear tire or wheel while out on the road without the need for a center stand, with the BikeMaster Liftstick. Handy and convenient to carry. Perfect for street, dual sport and trail use. Liftstick includes non-slip rubber boots, which protect your motorcycle's swingarm from any scratches while claws at the base provide traction and stability during use.
- Made of heavy-duty steel with a powder-coated finish.
- Available in black or red.
- Extends from 12.5" - 18"
Light up your work area with this LED Flexible Light with Magnetic Base.
- Ultra thin, flexible, bendable and foldable
- Wrap it around, loop it over, set it down or use the magnets to hold it up
- Silicone construction body
Ever had to turn back on the trail because of downed limbs? Or have you ever been moto camping and needed some wood for a fire?
This is the tool for you then! We have tried this manual chainsaw and it makes quick work of hard woods like Oak.
The chain itself is 25 inches long with 8 inch nylon straps at each end. All together this saw weighs 1/4 of a pound. This will tuck away nicely into any tool pouch or saddle bag as it roll up into a tight round.
This Motion Pro press tool is a must have when installing and removing Clip-Style master links (520, 525 & 530 sizes).
Easily presses on and off master link plates, works on 520, 525 & 530 Clip-Style master links.
Maximum master link width 24.8mm.
Will not damage master links, hardened steel pins for reliable use.
Light weight billet aluminum construction.
Use this tool to check for air leaks in two-stroke engines. It includes air pressure gauge, pump-up bulb and most fittings and adapters for single and twin-cylinder two-stroke motorcycle engines. Packed in a convenient carrying case with instructions.
Features:
- 2-ended design combines brush and pick with a curved spade to help vehicle clean off mud and debris
- Curved spade for the big stuff
- Brush head to clean controls and radiator
- Pointed tip for foot pegs and hard to reach places
- Includes a hanging hole for easy storage in the garage
- Ergonomic handle is made from durable ABS plastic
- Patented design
Nitro Tape is a self-fusing silicone tape that's easy to remove with no residue.
It is waterproof, stretches up to 300%, has a temperature range from -65° to 500°F and insulates 8,000 volts per layer.
It resists UV, salt and corrosive chemicals.
20 mil thick, 1" by 10' long.
If you've split a radiator hose, this can help. A 'must have' for all tool kits.
The features of this tool include 300 psi capacity, bleeder valve and T-handle plunger pin chuck. Swivel chuck has a 12" flexible hose. Comes complete with instructions, carrying box and Schrader valve extension (required on some Showa shocks). Nitrogen bottles available at any welding supply house.
- Integrated shutoff valve allows precise amount of liquid to be dispensed
- Graduation marks for cubic centimeters, fluid ounces and premix ratio
- 1000 cc (34 oz) capacity
- Easy to understand premix ratio graduations for 32:1, 40:1, 50:1, and 60:1 for 1 to 3 gallons
- Adjustable ball-pivot spout allows easy, spill-free filling
- Top cover keeps dust and dirt out when not in use
- Magnet allows funnel to be stored conveniently on the side of your tool box
- Large molded handle for secure grip
- Reduced neck keeps funnel from dripping residue when funnel is laid on its side
Makes installation of your linkage bearings much easier. Also simplifies maintenance of those bearings.
- Allows placing bearing needles on bearing race while greasing linkage bearings
The Snap Jack is an easy to use, portable, sturdy jack for chain lubricating, adjustment and chain drive maintenance. Also, simplifies cleaning. It can lift the rear tire up to 1/2" to allow the tire to spin freely. Includes front brake locking strap and handy carrying bag.
A professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.
Includes Tips 5.1, 5.6, 5.8, 6.1, 6.3, 6.5, 6.7, 6.8, 6.9 and Spline drive.
Convenient professional grade spoke wrench, a great addition to any tool pouch.
- Knurled nonslip aluminum handle
- Includes 6.8mm tip
- Quick release ball detent tips allows for quick changes to other optional sizes
Recommended for use with Warp 9 wheels. Please measure nipple size to ensure proper fit.
ULTIMATE SPROCKET WRENCH KIT
- 12” long wrench gives you more torque to get those thread locked sprocket bolts off easily
- Double ended 12mm & 13mm to fit all modern motocross, Enduro and dual sport bikes
- Dog leg wrench design allows wrench to easily clear rim edge and wide tires
- 8mm allen fits most Japanese bikes 8” long for extra leverage
- Torx T45 fits late model KTM and Husqvarna bikes, 8” long for extra leverage
- Vinyl coated handles to protect rim edge and give a non slip grip
- Makes routine sprocket bolt maintenance a quick and easy job
The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws are very easy to strip if you are using a regular Phillips screwdriver.
This is a high quality Motion Pro T-handle driver with #1, #2, and #3 JIS bits made from S2 tool steel. There is bit in each end of the driver held in place magnetically. These are 1/4" hex drive heads so you can use all common driver bits as well. The narrow drive head profile easily fits into tight locations. Main shaft is 8.5" long and is chrome plated for protection.
Thread Chasers are designed to clean and re-cut damaged aluminum threads.
This kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.
Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.
Uses 8mm or 10mm hex sockets, a Must for all tool kits.
A compact and lightweight solution to eliminate the SNAP for a safer tow. If you have ever towed a motorcycle you are familiar with the snap that comes with a traditional tow strap. GCAG made the Dynatow with a section that gives 32 inches of stretch so both riders have an easier tow.
The 26 foot total length gives you enough room to maneuver around obstacles and allows the freedom to choose better lines if you are towing in the gnar.
You can also use this as a recovery strap. You can girth hitch the loop end to the bike and throw the other end to a friend to pull. The dynamic properties of the Dynatow will help assist the pull. All of this functionality fits in a flat pouch about the size of sandwich and only weighs 12.8 oz. Throw it in your bag and be prepared.
Specifications:
- 1" Nylon Webbing - UV resistant and heavy duty.
- Tough Tensioners - The elastics are woven inside tubular nylon webbing for protection and strength.
- Hi-Viz Color - The bright green color will make this easy to see.
- Sewn Loop - The towing rider can choose to use a loop around the peg or wrap it. The loop also gives options to girth hitch if needed.
- 1000D Cordura Storage Pouch- protects the strap against abrasion while stored and keeps it compact.
- Multi Use - All good adventure gear is multi-use. Here's a few ideas.
- Ridge line for a tarp.
- Clothes line while camping.
- Recovery strap for a friend to pull on.
- Compact and Lightweight
- Dimensions - 8 in x 6 in x 1 in
- Weight - 12.8 oz
- 1,000 LB Working Load - They made it strong just like all of their products.
Please consider the following before use: Practice before you need to use this product. Always inspect your Dynatow strap before use and NEVER use a worn strap. They recommend a proper training class to learn safe methods for towing a motorcycle.
The Giant Loop Tow Strap is a multi-functional tool that helps get you or your riding friends out of sticky situations.
This Cordura® Ballistic tow strap, designed with sewn loops on each end, can be girth hitched around a tree, bumper, rock, etc.; or used with footpeg-to-footpeg or other motorcycle (and snowmobile, ATV, snow bike) towing techniques. Constructed in the USA from ultra-durable custom woven Cordura® Ballistic webbing, which folds up into a compact integrated cover made with 22 oz. vinyl-coated polyester, or what they like to call “truckers tarp.”
Doubles as a quick deploying, super-strong ridge line for pitching a shelter tarp.
- DIMENSIONS: Measures 14’-9″ L (450 cm), with 6″ (15 cm) loops sewn into each end. 10″ L x 2″ W x 2″ D (25 cm L x 5 cm W x 5 cm D) (packed)
- WEIGHT: 5 oz. (141 g.)
Color may vary based on manufacturer availability, quality will not be compromised.
A must for getting your wheels straight, concentric and true. For use with a truing and balancing stand.
Dial Indicator Features:
- Revolution counter.
- Graduation: .001"
- .100" revolution
- Dial reading: 0-100
Magnetic Base Features:
- 130 lbs. of pull.
- With fine adjust.
- Base: 2-5/8" x 2"
- Overall Height: 9"
- Permanent magnetic type ON/OFF switch makes it easy to rest on iron or steel.
Kit Includes:
- Dial indicator.
- Magnetic base with fine adjust.
- Supplied in plastic storage case.
Always wanted to build or true your own wheels? Maybe just be able to balance your wheels after changing tires. This stand is perfect for both of those tasks.
- Features a bubble level to balance wheels correctly the first time
- Steel plate construction for durability and stability
- Comes with shaft, cones and spacers to fit just about any wheel
- Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened
- Knurled knob on adjuster drivers ensure a precise and secure grip
- Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw
- Includes 10mm socket with straight slot adjuster
- Fit motorcycles and ATVs with straight slot screw-type adjusters and 10mm lock nuts
Simplify self recovery with this quick deploy Z-Drag kit. It can sap your energy trying to get your bike unstuck. It can also fall in a way that makes it very difficult to pick up. The Z-Drag is a common rig to give you a mechanical advantage for reduced pull. The combination of roller cams provides a 4:1 pulling ratio for self recovery and a 5:1 ratio when you have help. A laminated instruction card is included in the bag.
Quick Deploy | No knowledge of rigging and knot work required. Our Z-Drag comes out of the bag rigged and ready to use. |
Color Coded | For simple operation. |
Locking Carabiners | Two climbing rated, locking carabiners for secure attachment. |
Lightweight | Approx. 3 pounds and small enough to pack on a motorcycle. |
Strong | Even though its small, it still has a 1000 pound working load. |
Versatile | With a 74' mainline you will always have enough length to get creative in a tough situation. |
Multi-Function Bag | The bag features MOLLE compatible webbing on the outside for external attachment. The bag can also be utilized as a dead man anchor. |
Storage | Comes in a 1000D Cordura storage bag. |
Recovery | Can be used for solo recovery or with help from friends. |
Trail Repairs | Can easily be used to hoist your bike from an overhead support for repairs and maintenance while traveling. |
Clearing Trails | Move fallen trees out or other obstacles out of the way. |
Camping | Can be used to hoist a bear bag, act as a ridge line for stringing a tarp, etc. |
Chemicals
Time to freshen up your forks? Three pack or single 16oz bottles of Maxima fork oil that will refill your tubes after any fork job. This is a high-quality fork oil and what we use on our projects here at ProCycle.
For most situations you will use 10w Fork Oil. Some custom applications will use the 5w or 15w oil. Order the 5w oil if you have Ricor Intiminators or Cogent DDCs.
This advanced filter oil & cleaner kit by No Toil is alcohol free, completely biodegradable and compatible with all foam filters.
- Offers superior protection
- Waterproof yet easy to clean
- High-performance cleaner and degreaser specifically formulated to remove oil, lubricants, grease, grime and other deposits
- Formulated to clean K&N Filtercharger air filter elements
- Dissolves dirt buildup and old filter oil; washes away with water
- Biodegradable; safe on paint, plastic, cast aluminum and rubber
- 355 ML / 12 U.S. FL OZ. Spray Bottle, Instructions included
- Made in the U.S.A.
- Do not use on polished or anodized aluminum.
Muc-Off Air Filter Cleaner is a state of the art, professional strength bio-degradeable cleaner that's designed to clean and care for foam filters. Its unique combination of active ingredients is formulated to rip through dirt and oil in seconds, without damaging the foam or glue.
- Specifically designed to be ultra- safe on surfaces
- Helps to extend life of foam and glues
- Suitable for all bikes foam air filters
Dust/waterproof synthetic/petroleum blend for foam-type air filter elements. Super-tacky polymer and co-polymer additives hold onto virtually all fine particles.
- 4-12% increased airflow over competitive products
- Will not plug or migrate off of filters
- Resists washout from carburetor fogging
- Dyed dark blue to ensure even coverage
- Made in the U.S.A.
Limited to ground domestic shipping only.
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.
These brake fluids are motorcycle approved DOT 4 brake fluid, and is specially formulated to exceed all DOT 3 & DOT 4 specifications. What this means to you is exceptional resistance to vapor lock and maintaining consistent lever feel during extreme brake use.
- Formulated for hydraulic brake systems
- Mixes with all fluids meeting DOT 3 and DOT 4 specifications
- Boiling point: dry 446°F, wet 311°F
- For brake systems and hydraulic clutches, except systems using mineral base fluids
- 355ml bottle
Don’t Ride without the Slide
BugSlide is a complete waterless detailer that cleans, shines and degreases while removing bugs and other surface contaminants with ease. BugSlide leaves a protective, microscopic finish that continuously repels dust, dirt, water and fingerprints. Never wax again! The release agent in BugSlide makes clean up quick and easy. BugSlide contains a UV filter for added protection and dries crystal clear with no yellowing, no build-up and no powdery residue.
Safe to use on all types of vehicles.
- Safe to use multiple surfaces including Lexan, glass, fiberglass, plexiglass, chrome, stainless steel, aluminum, leather, vinyl and any non-porous surfaces.
- Free of wax, petroleum, silicone, Teflon or harsh chemicals.
- Leaves a protective, microscopic finish that continually repels dust, dirt, water and fingerprints.
- Contains a UV filter for added protection, dries crystal clear with no yellowing, no buildup or powdery residue.
- Proudly made in USA.
Goes on wet but solvent evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.
- Designed to resist fling-off (even in high speed applications)
- Protective coating dries white to ensure complete coverage
- Will not attract dirt, sand, or grit
- Wear and corrosion protection for long chain and sprocket life
- For chain applications, including ‘O’, ‘X’, and ‘Z’ ring units and roller chains
- 5.9 oz (175ml) Aerosol
Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.
The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.
This is a vacuum operated automatic chain oiling system to keep your driveline adequately lubricated at all times.
When properly adjusted the oil will last thousands of miles between refills. The Scottoiler kit includes one 250ml bottler of oil which is good for 10000 miles of riding.
- Revolutionary Parafilm™ formula; spray it on and let it dry
- Doesn't fling off
- Sprays on wet, dries to waxy film and seals the lubricant to your chain
- Non-gooey finish keeps dirt, sand and grit from sticking to freshly lubed chains
- Translates into longer chain life and reduced sprocket wear
- 5.5 oz net wt Aerosol
- Spray on chain and let dry
- Provides a coated layer of oil & waxy film that prevents dirt and debris from sticking to the chain
- Safe to use on all X, Z and O-ring chains
- Protective layer of lubricative film extends the life of your chain and sprockets
- Can be used on Off-road and Street applications
- 10 oz net wt Aerosol
- Engineered to keep your chain clean and lubricated under the harshest conditions
- The triple action formula cleans, lubricates and protects your chain - no matter if it's a standard or O-ring chain
- Engineered to adhere to your chain, on or off-road, and lasts long during those epic adventures
- The biodegradable solvent carrier helps clean chain and aids delivery of oil to micro-pores in chain
- Biodegradable oil penetrates and adheres to metal for an efficient, long-lasting lubricant
- Biodegradable wax seals in oil and keeps dirt off of your chain
- Biodegradable and non-toxic
- Available in 12-ounce (EU: 354,88 ml) aerosol cans
BananaSlip anti-fling PTFE Chain Wax is perfect for motorcycle and motorsport chains that will experience prolonged cycles and high impact environmental conditions. Our unique formulation penetrates deep into the links of the chain before drying externally to leave a protective layer against water and dirt. By producing an ultra-long lasting wax, BananaSlip keeps the joints of the chain well lubricated and reduces frictional losses between the chain and the sprocket up to twice as long as traditional chain oils. As a result, BananaSlip Chain Wax not only lubricates and protects but also enhances performance and the life of moving components.
Features:
- Touring, Sports Touring
- Off-road riding
- Commuting & motorway
- Mixed riding style
- 16.9 oz (500ML) Aerosol
Evans Waterless Coolant (EWC) can be used for all water cooled motorcycles to eliminate overheating. With a boiling point in excess of 375° F, it will not vaporize, thus eliminating overheating, boil-over and after-boil. At the other end of the spectrum, EWC freezes below -40° F.
EWC also delivers more power by eliminating pre-ignition and detonation caused by overheating, thus improving combustion efficiency. It also generates very low vapor pressures which reduces strain on cooling system components. EWC comes in 1/2 gal. containers.
Installation requires specific procedures. Please refer to the instructions.
Dielectric Grease is an insulating silicone grease designed to insulate and protect electrical connections. Pack it into the back side of electrical connectors to protect them from moisture and corrosion. Do not put it directly on the connection surfaces.
- Protects electrical connections and wiring from salt, dirt and corrosion.
- Prevents voltage leaks around any electrical connection.
- Extends the life of bulb sockets.
- Suggested Applications: Marine and automotive electrical connections, spark plug boots, trailer hitches, battery terminals.
This is a weatherproof protectant for wiring and electrical connections. Goes on as a liquid and dries to a vinyl polymer that resists dirt, dust, chemicals and moisture, ensuring that connections stay intact. Brush-top applicator allows coverage without gaps and enables access to tight spaces that roll tape and shrink tubing can't get to.
Stabilizes gas for short and long term periods of inactivity (up to two years) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. 8 oz bottle treats 48 gallons of fuel.
- Cures and prevents ethanol fuel problems
- Helps prevent phase separation
- Makes engines start easily, run smooth
Permatex Gasket Remover will help you remove that stubborn gasket without having to scrape so much, possibly damaging surfaces. Prepares surfaces for new gaskets. Give it plenty of time to soak in.
- Motion Pro engineers and test riders found this formula to be the best grip glue available at any price
- Easy to apply and easy to remove from throttle tube and bars when you change grips
- High cured temperature resistance is compatible with grip heaters
- Set time is not so fast that you have to rush when installing grips, but fast enough so you can get riding right away
- Becomes tacky in 15 minutes at room temperature
- Outperforms rubber cement, acrylics and silicones because it bonds to more surfaces with greater strength and durability
- Also works great as general adhesive for anything that requires a flexible, waterproof bond that won't crack or become brittle.
- Excellent bonding to metal, plastic composites, rubber, leather, vinyl, glass and wood
- Exceptional flexibility, does not become brittle or hard
- Can bond items subject to vibration
- Abrasion resistance makes it great for bonding objects subject to wear
- Waterproof
- 20 gram tube (0.7 ounce) is enough for multiple applications
Filling and bleeding a Magura hydraulic clutch does not need to be a routine chore and should only need to be done when air infiltration within the system is suspected. Magura uses mineral oil, which does not absorb moisture from the environment, to lubricate the whole system.
Note: Magura hydraulic systems use ONLY mineral oil. Do not introduce DOT brake fluid of any kind into a hydraulic system designed to use mineral oil as this will cause corrosion to the internal seals and system failure may result. The only time anyone should ever need to replace the hydraulic fluid in a Magura system is following a hydraulic line exchange, a system upgrade, a crash which has damaged the system components or in a situation where a lack of fluid within the system has been diagnosed by poor lever feel.
If you do need to bleed your Magura hydraulic system, their custom made kit does indeed make that chore easier.
Removes splattered insects and organic residues (bird droppings) from wind screens, fairings, paint, metal, mirrors and motorcycle plastics. Like all the other Motul products that we like so much, Insect Remover is amazing. Spray it on and let it sit for a few minutes. It softens and dissolves bug remains much better than other cleaning products.
The best product for those surfaces that mate together without a gasket. Like center cases, cam covers and the like.
- Heat-resistant
- Tough, durable sealer utilizing silicone rubber as a primary component
- Ideal for applications where a long-lasting, faultless seal is absolutely critical
- 3.5 oz. tube