Spring time is in full swing here at ProCycle. With these busy days please be sure to let us know if your order is time sensitive. We try to do as much as we can to accommodate your upcoming trip.
| Front Tire: | Rear Tire: | Spark Plug: | |||
|---|---|---|---|---|---|
| 120/90-10 | 130/90-10 | CR8EH-9 |
Deltran quick-connect plug with LCD voltmeter display. Plug this into your Battery Tender, or any SAE cable, for an LCD display of the battery voltage. Three LED lights indicate the state of charge as well.
So you say you want more light for your dual sport? Give this 7"DOT legal Rally light a try and light it up like a freight train! HIGH/LOW operation and SAE/DOT/E4 approved.
This light does not have the large Cyclops logos shown on one of the images.
Optional 10.0 Lumen LED High/Low Upgrade and now the Phoenix LED complete headlight for the ultimate DOT headlight
The stock lamp that comes with this rally light is great, but you can get well over double the brightness with the LED upgrade at a substantially lower power draw. Note if your bike is ac powered at the headlight you will need the rectifier for the LED option.. AKA carbureted KTM's CRFX and XR400/650.. others may apply.
Each 10 watt Solstice Solo produces 900 lumens, which is roughly equal to a 50 watt halogen bulb. These are one of the brightest LED off road lamps on the market. The rugged and compact 2” x 2” square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with other Solstice Solo pods. Includes stainless steel mounting bracket and waterproof connection. Choose narrow, medium, wide or elliptical light beam pattern. Our favorite is the Elliptical pattern which is wide and flat, putting most of the light where you need it the most.
Sold each.
A game changer in compact auxiliary lights. High output, compact and lightweight!
The New Cyclops Aurora 2 inch lights rated at 4000 lumens for the a set. Using an authentic top binned Cree XHP50 emitter these lights pack a punch!
Available with or without the daytime Running light option (DRL) which can also be a front blinker. (you may need a led flasher to do that)
Like all Cyclops lights we only use the Best Real Cree emitters. R113, R10 TUV and Emark certified IP68 rated.
Includes a full relayed wire harness designed for a Motorcycle. No need to use a switch if running the DRL version, also no need for a switch if using the skene dimmer or want the lights on in high beam and off in low beam. The factory switch will work for these applications. Unless you have a LED factory headlight in a R1200gs,850Gs or KTM1290 these bikes will require our Raider canbus controller.
Look at these quality features!
The little light that can! Don't be fooled by the mini size, big light comes out of this bad boy.
New design for 2021 featuring more durable, positive push button switch, metal handle bar mounts and options to allow this light to work for many applications. Switch, cords, strain reliefs and optics for optimal water resistance, ruggedness and performance.
It uses a go pro type mount with an aluminum platform to mount almost anywhere. Also included is a handle bar mount (mount on center of bars). No plastic parts on the light head.
Choose the optional SS platform to mount the light above the bars per two of the identified photos. (Fits all stock 7/8 and 1 1/8 bars. Not for flexbars)
Included is a rubber covered handle bar mounted switch with 2 power level settings 50% and full on.
Combo beam pattern, spot and wide beam in one light.
Compatible with Go Pro mounts, Perfect for modern EFI bikes.
Now a lifetime warrantied LED light set at a budget friendly price.. and Not made in China.
The new Cyclops Pegasus led light set comes complete with a high quality relayed wire harness and a potent combo light beam pattern.
We are able to offer this fantastic light at a great price due to a one piece optic and sealed beam construction, eliminating extra parts and creating a very durable and high performance light.
These lights in white feature 7 watt emitters (28 watts per light) with two 10 degree and two 25 degree optics, Good for 500 plus ft of lighting (white).
The amber version is a Cree 3 watt emitters (12 watts per light).
This combo beam pattern offers good forward lighting and extremely good conspicuity.
The light set is available in white 5600K or a extremely bright Amber, perfect to allow those autos to see you. Lightweight and robust at 2.75 inches with a single stud mounting, they fit just about anywhere you would like to mount your lights.
Specs:
The Mojave Series LED Racing Lights have been designed to survive and operate in extreme conditions. lights feature a heavy duty housing that can withstand hard impacts and a lens that is twice as thick as traditional lights. The light includes three different replaceable lens (Flood, Spot, and Combo).
Features:
Kit includes: 2x LED Aux lights with harness and switch, 2x Light mounting brackets and bolts, Switch mounting bracket
This kit will work with the 6.6 Gallon Acerbis fuel tank for the DR650. You must run the light brackets inwards in order for there to be proper clearance with the 6.6. Gallon tank.
Kit includes: 2" x 3" LED light pods. Harness with switch and mounting bracket. Left & Right mounting brackets. 4x lower triple clamp bolts
This kit includes 2 auxiliary light mount brackets. These brackets are designed to mount to most lower triple clamps. New longer bolts are supplied to accommodate the thickness of the bracket. These brackets are powder coated black for a sleek and long lasting finish. The brackets can be used to put the addition of new lights to the outside of your forks or swap the brackets and the lights can be mounted inward to give more clearance for bigger shrouds or fuel tanks.
The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. This mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.
This is for Mount Only. Sold individually.
10 Watt LED lights sold separately.
This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.
Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.
License plate light with 5 LEDs. Compact and easy to mount. Meets plate illumination requirements with super white light.
This is for the LED license plate light ONLY.
License plate bolt with bright white LED light. The simple way to light up your plate.
The Barkbuster LED Indicator Lights for Jet, Storm & VPS Plastic Handguards to increase your visibility and safety using 15 high intensity LEDs that mount directly to the plastic handguard shells. Super bright auxiliary signals will make your directional intentions clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.
Features:
What's in the box:
Please Note: Not compatible with the electrical system on the Honda Africa Twin CRF1000L
Clear lens, amber LED type lights. Short flexible stems. Very small, only 2 7/8" long. Requires a LED turn signal flasher to flash properly. 4 Pack
Eight ultra-bright amber LED lights in a sleek design. Flexible stem helps absorb the occasional hit. Available in 2 pack or 4 pack
Recommended to use resistor for proper turn signal flash rate.
Specifications
These signals have short rubberized flexible stems and bright mini halogen bulbs.
Ultra bright amber LED turnsignals offer nearly the same visibility in a much smaller package. 15 amber LEDs in every signal. Flexible rubber stalks. Requires a LED turn signal to flash properly.
Pack of Two
These Sequential Turn Signals are available in a 2 pack or 4 pack flexible stem with 7 LEDs on the front models and 14 LEDs on the rear model.
Matte Black, plastic body with smoke lens and 8mm mount bolt.
Specifications
These Sequential Turn Signals are available in a 2 pack or 4 pack short stem with 7 LEDs.
Matte Black, plastic body with smoke lens and 8mm mount bolt.
Specifications
You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.
The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.
Not for any DRZ400 or Royal Enfield Himalayan
This type of flasher is required for LED turn signals. For DC (battery) systems only. Includes 2 female connectors for universal fit.
Not compatible with any DRZ400
Works on AC and DC lighting systems
Not compatible with any DRZ400
Allows LED type turn signals (and low wattage flush mounts) to flash using a standard flasher unit. Connectors included. One kit works with 4 signals.
The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights.
Features:
This devices allows any two wire after market LED turn signal indicators to operate as running lights (always on), and will blink on / off when the turn signal switch is activated. It is highly recommended to use this product with the Fixed Rate Turn Signal Flasher. This device, as well as aftermarket turn signals, use much less current than stock turn signals, thus an increased flash rate will occur. Load resistors or a fixed rate turn signal flasher will get your flashers operating at the normal flash rate again.
Each package contains two separate adapter boxes, good for operating both turn signals, left and right of either the front OR rear of your motorcycle. You will need to purchase a 2nd kit if doing the Front AND Rear of the motorcycle.
This device is universal; designed to work for any motorcycle with a DC electrical system. Kit comes with bullet connectors to wire in manually. Works with any two wire non-sequential aftermarket LED turn signal indicators.
Fits Most Models
This Diode Kit is only necessary if you have a single dash indicator for your turn signals. One dash light for both left and right signals (such as on the DR650).
This kit allows power to flow in just one direction from the LED signals to the dash indicator light regardless of which direction you are signalling.
These turn signal relocation brackets from ProMoto Billet provide an easy way to move the stock turn signal lights, useful if you find them getting in the way of your luggage configuration.
These brackets may utilize an existing hole in some of the rack side brackets, though many applications will require drilling or fabricating in order to mount properly.
Replacement Halogen bulbs for mini style turn signals. Sold in a pack of 5 bulbs.
Roll-up pouch ideal for tucking away your lights when out on the trail.
Installing new turn signals or brake lights and need to find the 'HOT' wire, or are you just trying to find out if a specific wire has power going to it? Either way, this test light can help you locate shorts, open, and voltage on 12-24 volt DC circuits.
Inexpensive way of getting the factory look. Adds 1/2" of width to any standard foot peg. These will give you a much more stable platform when standing on the pegs.
Sold in pairs.
Not your average rubber insert! These rubber covers go over the top of your MK3 or MK4 Pivot Pegz so that the aggressive teeth are only exposed when you need them in muddy conditions.
Important to verify which style Pivot Pegz you have before ordering.
Services two Pivot Pegz and fits MK2, MK3 and MK4 Pivot Pegz
Kit Contents:
Premium drive belts offer longer life than standard ones. A worn drive belt can affect your scooter's top speed.
Always carry a spare master link when out on the trail.
Master links are not interchangeable. Be sure to check the manufacturer and series on your chain.
These do not fit the TW200 or XT250. Only for 520 os 525 chains, Please verify chain size.
Designed for quick and accurate alignment, this tool clamps squarely to the rear sprocket so the alignment rod can indicate sprocket alignment with the chain.
Can break or rivet chains from #35 to #530 like a pro.
kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.
kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.
NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.
Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.
The head of the pivot pin you are going to remove must be ground down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!
Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.
Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.
This Motion Pro press tool is a must have when installing and removing Clip-Style master links (520, 525 & 530 sizes).
Easily presses on and off master link plates, works on 520, 525 & 530 Clip-Style master links.
Maximum master link width 24.8mm.
Will not damage master links, hardened steel pins for reliable use.
Light weight billet aluminum construction.
A high quality master link press tool from Wirth Machine used for the removal and installation of master links using a press fit link plate.
Fits 520, 525, and 530 pitch chain.
ULTIMATE SPROCKET WRENCH KIT
This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.
Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.
Ruckus brake shoes front or rear.
This brake bleeder makes bleeding your brakes a one man job.
The unique check valve allows fluid and air to escape while preventing air from re-entering the system.
Combines wrench and bleeder valve into one convenient and compact tool
Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.
The three forces of suspension, testing procedures, even the black arts of chassis geometry: Thede explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.
Showa removed the schrader valve on many newer rear shocks. Now you need a needle to recharge your shock with nitrogen after a rebuild. Race Tech built this unit just for that job.
The features of this tool include 300 psi capacity, bleeder valve and T-handle plunger pin chuck. Swivel chuck has a 12" flexible hose. Comes complete with instructions, carrying box and Schrader valve extension (required on some Showa shocks). Nitrogen bottles available at any welding supply house.
Makes installation of your linkage bearings much easier. Also simplifies maintenance of those bearings.
This Quiet Insert comes stock in all new FMF Q4 mufflers. If you lost yours, this is the replacement you need.
It will fit Q4, Q4 Hex, Powercore and Powercore Hex mufflers.
It will reduce the sound rating of the Power Core models, from about 99db down to about 96db.
Please choose the correct Insert for your muffler. If you are unsure of the year that your muffler was manufactured you can easily identify visually which insert you will need.
| Pre '21 | Installs using one small screw |
| '21-Cur | Installs using a spiral retaining ring |
Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.
If your aftermarket exhaust is missing heat shield mounting points for this is the easy fix you’ve been waiting for. Includes one stainless steel mounting bracket with M6 threaded nut, and one stainless steel hose clamp.
Fits exhaust approximately 1.1inch-2inch diameter. Trimming may be required for smaller diameter exhausts.
The Chilly Exhaust Heat Shield is the most effective heat shield on the market. The innovative three piece design consists of a top shield attached to 2 rails with rivets and spacers. This reduces the contact area and slows down heat transfer. They have incorporated a patented, insulated reflective blanket on the underside of the shield to reduce radiant heat transfer. The included stainless steel clamp makes it simple to install.
We highly recommend a heat shield if you run soft luggage without hard racks.
FEATURES:
DIMENSIONS:
Have you lost your stock heat shield, or need one on an aftermarket head pipe? FMF makes this nice unit that includes clamps, heat shield with the FMF logo and button head screws to hold it on. We recommend Anti-Seize on all exhaust fasteners.
Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.
This universal heat shield provides a great look at a great price.
The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal, and is easy to install.
Re-pack your silencer with this pro-quality, three layer packing system and restore lost power and sound control.
Kit includes:
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.
Replacement Exhaust Pipe Retention Spring
Set your bike apart with a custom exhaust look. Withstands direct heat up to 2000°F.
Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.
Depending on your application and preferences, more than one heat shield may be useful.
Dimensions: 2"x3'
Precision cut from heavy gauge material.
Extremely durable design.
Push/Pull design for hard to reach places.
Soft but durable PVC coated handle.
CycleRacks are made out of Schedule 40 11/16 black steel pipe, bent in a press, and welded together in a jig. All of their racks have the same platform, 18" wide by 12" deep. Includes lower mount hardware.
All of their products are 100% made in the USA. If the rack is ever broken for any reason, CycleRacks will replace it for free, you just pay the shipping.
The universal E-series adapter plate is designed to add a Givi Monokey topcase to most existing flat rear luggage racks. All necessary mounting hardware and installation diagram for attachment to generic tubular-steel flat rear luggage racks is included. This is a universal plate so making it work on your tail rack might need a little self engineering.
Typically installs quickly using simple hand tools. Mounts standard Givi Monokey topcases (ie E45 Elegant, E460 Delux, E52 Maxia), or the flat, stable surface can be used as a solid toprack when the topcase is not needed. Not for use with GIVI Monolock topcases. Made of durable molded nylon with a rugged black finish.
What's in the Box:
The Hardcore Soft Rack has been specifically designed for smaller bikes that have very little support in the back for luggage.
The loops on the base and the side straps provide attachment points for our strap kits to secure bags across the back and down the sides of your motorcycle.
We have incorporated two carbon fiber support bars to increase rear carrying capacity.
NOTE: Aluminum support bars have been upgraded to carbon fiber, there is no longer tire iron functionality.
Construction Features:
THE LUGGAGE RIGGING POSSIBILITIES ARE ENDLESS!
This kit will set you up with the full Green Chile Adventure Gear treatment. You will be able to haul up to four bags of your choice. One system that can be rigged for day trips and easily scaled up for an expedition or extended trip.
No expensive bags required. Any bag becomes motorcycle luggage.
Don't have a rack on your bike? No problem! The flexible soft rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and you're ready to get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style contact points.
Contruction Features:
This Kit Includes:
TIRED OF LOOKING FOR A GOOD PLACE TO ATTACH TIE DOWNS AND STRAPS?
The Green Chile Adventure Gear Uprising Soft Rack is all about adding mount points to your bike. It adds over 60 mount points to the rear and sides of your bike and its quick and easy to install and adjust. The Uprising Soft Rack can be used with or without GCAG accessories, but when you add the soft rack as the base of your luggage system and combine a few other GCAG accessories you will have the world's first customizable and modular luggage system. You will not find a more versatile system anywhere else.
Don't have a rack on your bike? No problem! The flexible Soft Rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style mount points.
The GCAG Uprising Soft Rack is the flagship Green Chile innovation. This unique product is compatible with just about any motorcycle and soft luggage combination that you'd care to throw at it. Adventure bikes, dirt bikes, and crusiers...the Soft Rack does it all.
Specifications:
(patent pending)
Giant Loop’s Tail Rack bolts to plastic rear fender, creating solid anchor points for Giant Loop gear. Includes full stainless steel mounting hardware kit. Quick, easy installation. Fits virtually every dirt, dualsport and enduro bike.
The Scramble Rack is optimized for carrying luggage on the sides. The side straps provide plenty of mount points and the spacing is MOLLE compatible. The top mounting surface on the Scramble Rack is minimal and designed for small packs.
There are two versions of this rack.
CONSTRUCTION FEATURES:
THINGS YOU SHOULD KNOW:
Patent Pending
Giant Loop’s award-winning Pannier Mounts offer greater adjustability and are the ultimate quick-release, lockable solution for soft luggage and gear. These mounts are ultra light and tough, with quick release, quick-mount, lockable black anodized aluminum plates secure Giant Loop’s Round The World or MotoTrekk Panniers.
GL Pannier Mounts can also be used with Rotopax gas/water cans for easy installation on many popular side luggage rack systems. Sold as a set of two, with four matching keys. Stainless steel hardware is included for GL Round The World Panniers installation.
Add the optional GSA Adapter Kit for BMW GS Adventure original equipment luggage racks and other racks with “step” around exhaust. NOTE: Will NOT fit BMW 800GSA factory side luggage racks.
For mounting Hard Cases to various brands of side racks such as SW motech EVO quick lock, Moose or any racks with a rectangular design constructed with 5/8" to 3/4" material
Cycle Racks Bag Supports can used for many different Cycle Racks and can be used on either the front or rear rack.
When they developed these, they wanted a functional, yet "Easy On- Easy Off application. The pig tail hook goes up, over and underneath the bar of the rack, they can also be used upside down on the rear rack as side boards. To install them, wing them out, slide them in place and then wing them back down. Simply reverse the process to remove them.
Rok-Straps are supplied to secure them in place. They are pre-drilled to accept the pattern of the Roto-Pax Pack Mount (sold separately) so you can carry fuel or attach them to your own bags.
They are sold together in a set of one right support and one left support.
COLOR: Black
Keep essential items easily accessible with the OBR ADV Gear Sherpa Tail Bag. The OBR ADV Gear Sherpa Tail Bag attaches to your motorcycles rear rack via an optional strap free base panel or by a series of adjustable buckle straps. A padded spacious main compartment is perfect for carrying those items you wish to keep close such as tools, cameras, documentation, rain jacket, etc. A smaller mesh lid pocket sits above the main pocket for storage of smaller items.
Features
The low-profile Klamath Tail Rack Pack keeps gear organized and easily accessible — like a tank bag for the tail end of the motorcycle. The 4-liter soft luggage case features a zipper-less nested clamshell design inspired by classic motorcycle rally racing packs.
The Klamath attaches securely to virtually any motorcycle tail rack, many dirt bike rear fenders, and Giant Loop’s Siskiyou Panniers or MoJavi Saddlebags. Now even faster and easier to install and remove, with two included 25″ Pronghorn Straps.
This is a great tail bag for anyone looking for a mix of a saddle bag & tail bag. If you have a Cycle Racks rear top rack on a TW200, it lays nicely across giving you plenty of storage.
Lite:
This Trekker Top Case is manufactured from glass fiber reinforce polymers ensures high structural rigidity. An anodized aluminum cover is then placed over that to resist weathering. 52 liters in size, there is enough room for 2 helmets. Attaches to your favorite rack with a Monokey fixing system. Available in Aluminum or Matte Black.
The Revelstoke is Giant Loop’s crossover roll-top dry bag that works on multiple vehicle types due to its versatile small rectangular shape that mounts to virtually any motorcycle, snowmobile, snowbike, UTV, or ATV for quick and easy access to gear.
With its 100% waterproof, mudproof, dustproof, and snowproof design, the Revelstoke delivers 16 liters of storage in a slim, trim profile. Ideal for carrying trail essentials such as extra layers, emergency supplies, snacks, tools, and other small items.
A collection of waterproof bags made by industry giant Givi. There are five different bags available, a 30, 20, 40 and 80 liter waterproof roll top bags and then a 20 liter back pack with padded straps and padded back.
Waterproof Cargo bag, 80 lt. Aimed at road Enduro bikes and Touring bikes
Materials: • Heavy-Duty Tarpaulin/PVC • IP 66 water resistance: resistant to heavy rain, temporary immersion and extreme conditions Other characteristics: • Reflective print for greater visibility • Waterproof roll-up closure system • Additional internal zipped pocket • Adjustable EVA-padded shoulder strap • Air vent valve • Elastic straps for universal mounting
Rigg Gear has created a couple of great roll top bags. These bags are 100% waterproof, made from 24 oz. Tarpaulin PVC and then electronically heat welds the seams. A roll closure with self-fastening webbing and quick release buckles keeps the top closed and sealed. The Tarpaulin is UV coated so clean-up is quick and easy. Each of these bags has a lifetime warranty!
Once topped off, you can fasten it to your bags, racks or whatever by four custom aluminum G-Hooks and webbing straps that are included with each bag. Each bag has a Tri-max 1680D ballistic nylon panel sewn on a side to be used on the bottom for wear resistance. This also serves as a comfort panel when the bag is used as a backpack.
*Each bag has sewn in loops that allow attachment of a set of shoulder straps so these bags can double as a backpack. Perfect for a day hike.
Each of the bag sizes is available in Black or Yellow. Main compartment measurement is 18" Long by 8" Dia. for the 15L and 19" Long and 10.5" Dia. for the 30L bag.
(NOTE: The 15L bag does NOT include the straps, can be purchased separately.)
Do more with less with the 2020 Rolie Bags WP (Welded Product) from Wolfman Motorcycle Luggage. This 100% waterproof, roll-top bag uses waterproof fabric, durable straps and buckles, and laser-cut slots to allow for a variety of mounting options.
The 2020 Wolfman Rolie Bags offer superior protection against the elements utilizing the latest in Radio Frequency Welding (RF Welding) technology and custom 840d TPU fabric. With standard straps and additional mounting slots laser cut into the body, Rolies allow you to personalize your kit. Use as a compressible Rack or Seat Bag. Same bag, Multi-function.
Versatile - same bag, many uses:
Only available in SMALL
Small Capacity: 6 liters/366 cu in
Weight: .68 lb/.31kg
The perfect dry trail pack from Moose. Constructed of heavy-duty waterproof tarpaulin with heat-welded seams. Heavy-duty ITW quick-release buckles and YKK water-resistant zippered external pockets make for a versitle bag.
The roll-down top creates a truly waterproof seal for the main compartment. Dual compression straps provide a secure closure and can be used to store gear externally as well. Coated tarpaulin material makes cleaning a breeze. Available in three great sizes - 25, 40 and 60 liters.
If you like these bags, you might like the matching ADV1 Backpack.
Ultra lightweight polyester (with PU coating) waterproof material, sealed seams, and heavy-duty ITW quick-release buckles make these a great bag for temporary packing or organizing items in larger bags and staying dry regardless of what they are packed in.
Available in a single 25 liter bag or a set of three bags that include a 2 liter, 5 liter and 10 liter bag.
If you use Rolie Bags or Rocky Mountain Expedition Saddle Bags, these Stuff-It stuff sacks will make it easier to pack and keep your gear organized.
Stuff-It stuff sacks are sized specifically for each size of Rolie Bag or saddle bag, built just slightly undersized so they’ll slide in and out with ease. You can also mix sizes for more packing options.
HiViz colors make them easy to see and see inside. Draw cord closure. The Stuff-It for Rocky Mtn/EXP Saddle Bags has handles for ease of removal, and can double as a ultralight tote bag.
Rolie Bags and Rocky Mountain Saddle Bags sold separately
All Stuff-Its are sold in pairs.
Fits Small Rolie Bag WP - HiViz Orange
Introducing Armadillo Bag®, flexible, collapsible, lightweight, expedition-ready utility bladders for the safe transport and storage of liquid hydrocarbon products and other powersports and automotive fluids, available in 1-, 2-, 3- and 5-gallon sizes. Includes pour spout.
Features:
Armadillo Bags are not portable fuel containers as described by ASTM, EPA, ARB or other state and federal agencies. Armadillo Bags are NOT intended for fuel storage or transport in the USA.
| Rolled Empty diameter | 2.5 inches (6.35 cm) |
| Weighs | 0.75 pounds (12 oz) |
| Flat Filled dimensions | L x W x H: 16.5" x 10" x 3" (41.91cm x 25.4cm x 7.62cm) |
Fits perfectly under the stock seat. Made from 1000-denier Cordura. Cordura is water-resistant and dries quickly. Mounts to seat frame with 4 hook & loop velcro straps. Includes a shoulder strap for easy carrying.
100% Waterproof! Saddlebag Dry Pods update Giant Loop’s Great Basin Saddlebag and Coyote Saddlebag, replacing the Great Basin Dry Pods and Coyote Dry Pods.
Keep gear organized and dry with this set of 3 roll-top inner liner Saddlebag Dry Pods, featuring RF welded seams and air purge valves that make it easy to compress gear by squeezing air out of the sealed Dry Pods. Specifically designed to fit inside every version of both the Great Basin Saddlebag and Coyote Saddlebag – as well as the new Great Basin Saddlebag Roll Top and Coyote Saddlebag Roll Top – Giant Loop’s Saddlebag Dry Pods also can be used anywhere you need high-quality, lightweight dry storage.
Includes two side Pods and one double-ended center Pod. Backed by a Limited Lifetime Warranty against defects.
The Chilly Exhaust Heat Shield is the most effective heat shield on the market. The innovative three piece design consists of a top shield attached to 2 rails with rivets and spacers. This reduces the contact area and slows down heat transfer. They have incorporated a patented, insulated reflective blanket on the underside of the shield to reduce radiant heat transfer. The included stainless steel clamp makes it simple to install.
We highly recommend a heat shield if you run soft luggage without hard racks.
FEATURES:
DIMENSIONS:
Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.
