Spring time is in full swing here at ProCycle. With these busy days please be sure to let us know if your order is time sensitive. We try to do as much as we can to accommodate your upcoming trip.
B&B Engineering Bash Plate for the CRF250L is made from 5083 4mm aluminum plate. Chosen because of its suitability for welding and extreme abrasion and impact resistance, this plate will protect the valuable center cases and deflect items away from the side cases as well. This plate is supplied with the necessary stainless clamps and bolts where necessary as well as foam or rubber where required.
The little WRs have decent shocks but it can surely be improved with a Rear Shock Gold Valve from Race Tech. This will improve the damping in both directions and make the clickers more responsive to adjustments.
- Bolt-on shock valving for riders serious about suspension performance
- Improves control, traction, plushness and bottoming resistance
- Improved, long-wearing, low-friction sealing design decreases fade
- Includes complete instructions
- Increased air flow over the stock air filter
- Designed to increase horsepower and throttle response
- Designed to fit inside the factory air box
- Larger surface area over foam filters which offers longer service intervals in dusty conditions
- Four layers of premium cotton gauze provides outstanding filtration
- Washable & re-usable, never wears out
- One filter will last the lifetime of your bike
The OEM foam secondary filter can deteriorate rather quickly. Once that happens, it can allow enough dirt into the engine to do significant damage. Replace your filter now with a high-quality foam filter from industry leader Twin Air.
This filter needs to be oiled like any air filter to work properly.
Only for bikes with the stock BST40 carburetor!
Billet aluminum lowering links. Lowers the rear suspension approximately 1 inch.
- Sold in pairs
Bel-Ray Waterproof Grease is the legendary high-performance, multi-purpose grease. Superior water resistance, even in salt water, will ensure continued sealing and protection. Perfect for wheel bearings, headsets, shock linkages, swing arm pivots and other motorcycle, ATV, snowmobile and marine chassis lubrication points. Due to its aluminum complex formula, it won't melt or run out. Enhanced mechanical stability and special anti-wear additives protect and lubricate bearings for improved performance. Sold in a 16 oz. tub.
Maxima brand may be substituted due to availability.
Greatly eases basic chain maintenance, tire changes, parking, cleaning, etc. All necessary hardware is included. Installs using basic hand tools. Tough black powder coated finish.
For riders who wish to run the centerstand and the lowered footpegs we recommend installing a Warp 9 brake pedal. The Warp 9 pedal is arched to give the necessary clearance under the pedal.
Need to remove your clutch assembly to get at that dreaded neutral safety switch? This holder is the quickest and easiest tool out there to get a grip on that hard to handle hub. Laser cut to the exact pattern that EBC makes their clutch plates from, it makes loosening and re-tightening the clutch nut easy. All of that and no worries about doing any damage to your expensive clutch hub.
The genuine Eagle Manufacturing balancer lever kit. All top quality components.
- KLR650s have been known to have problems with the stock idle lever (doohickey) needed to keep tension on the balancer chain - failure of this part can destroy the engine
- The Eagle Manufacturing idle-shaft lever and spring replaces the "weak" stock unit
- One-piece design lever is Machined from 17-4PH hardened, stainless steel to be incredibly strong
- Includes stainless doohickey, and the torsion spring with drill bit. (No longer includes extension springs. The torsion spring is far superior.)
With a Haynes manual, you can do it yourself…from simple maintenance to basic repairs. Haynes writes every book based on a complete teardown of the motorcycle. Haynes books have clear instructions and plenty of photographs that show each step.
- Step-by-step procedures
- Easy-to-follow photos
- Complete troubleshooting section
- Valuable short cuts
- Color spark plug diagnosis
Complete coverage for your Yamaha Trail Bikes covering PW, RT, TT-R and XT225/350 models for 1981 thru 2000.
This accessory for the Edge-2 tail light will NOT work with the stock tail light. This is a drop-in replacement for the stock circuit/LED board in the Edge and Edge-2 with a new circuit/LED board that has programmable integrated turn signals, safety brake pulsing and brighter LED's than the stock Edge-2 unit.
Even though this product provides integrated turn signals, that functionatility does not have to be used. The product can also be used with external signals, and provides patterns to sync with the blink rate of external signals. Here are just some of the options available with this unit.
- FIVE user selectable turn signal patterns
- Automatic safety brake pulsing with Enable / Disable capability
- Superbright LED's; For excellent brightness, even in direct sunlight
- Built-in license plate light with 3 super bright white LED's
- Includes 34 inch pre-attached wiring harness with jacketing
- 3 year product replacement warranty
Make the installation as easy as possible with an Optional Circuit Board, Plug & Play Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go.
We all love our TWs, but the stock jetting leaves much to be desired! Here is a Jet Kit for your stock TK carburetor to improve your throttle response. Included in the Kit are a wide range of main jets to cover any setup, one Pilot Jet, one Jet Needle, and five Needle Shims. If you have added an exhaust system or ride at higher elevations, this is a great way to tune your TW for your needs.
Don't have a dyno tuning center nearby? Are you more of a do it yourself type? Are you constantly changing parts on your bike?
If you answer "yes" to any or all of the questions above, then our Auto Tune kit is for you. The Dynojet Auto Tune kit is an "add on" accessory that can be used with any of the Power Commander Vs
It connects to the PCV with a single cable and requires only a ground and +12 volt connection to be made to install. If your exhaust does not already have one, a "weld in" O2 sensor bung is included
Once installed, the Auto Tune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the Power Commander V and automatically corrects it while you ride. Each map that we offer has preset Air/Fuel ratio values included that we find to be the best overall settings. This lets you simply plug in the unit and let it do the work.
Rebuilding your engine? Here is a complete gasket kit for your TW200. Includes: Head Gasket, Base Gasket, Stud Gasket, Head Side Cover O-Ring, two Valve Cover O-Rings, Base O-Ring, Stud O-Ring, Rocker Shaft O-Ring, two Cam Chain Tensioner O-Rings, Intake Manifold O-Ring, two Valve Stem Seals, Exhaust Gasket, Left and Right Side Cover Gaskets, Pump Cover Gasket, TDC Plug O-Ring, Crankshaft Nut Plug O-Ring, and Oil Filler Plug O-Ring.
CNC laser cut from 1/8"5052 aluminum then black powder coated and the logo laser etched in place with the V-Strom 650 logo to really set it off. The laser etched logo will not wear off like a vinyl or screen printed graphic.
Heavier gauge aluminum than other aftermarket guards and better coverage than the stock guard. It also will not crack at the stress points. Uses the stock mounting screws.
- An on-bike GPS system with all the features you've come to expect from Trail Tech
- View, Organize, Edit and Share Entire Trail Systems in 3D
- Designed Specifically to Meet the Needs of Off-Road Riders
- 240x400 LCD display - Readable even in Intense Sunlight
- Crash Resistant, Off-Road Design
- Upload Routes from any GPS
- Customizable User Screens
- Accurate Tracks, Even in the Toughest Terrain
- Runs on Vehicle Power (or internal battery)
- Back-lit for Operation in the Dark
Stage 1 - Excellent mid-range and top-end power increase.
Uses stock valve springs and rockers.
- Exhaust Cam Lobe Duration at 1mm 258°
- Exhaust Cam Lobe Lift 8.800mm
- Exhaust Cam Valve Lash 0.200mm
- Intake Cam Lobe Lift 8.800mm
- Intake Cam Valve Lash 0.150mm
- Intake Lobe Duration at 1mm 258°
Does not incorporate compression release.
The GPR V5 stabilizer is designed to be "tucked" away under the bars and is still easily adjustable without raising the handle bars too high.
- Kit includes damper, bolt on post mount, below the bar mounting system, and complete instructions.
- Only raises bars about 1/2".
Will only work with Fat Bar style (1 1/8" clamp area) handlebars and stock triple clamp.
Our ProCycle top rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.
Our racks allow for easy installation of both soft and hard luggage.
- 5/8" steel tubing
- Computer precision bending
- Durable powder coat finish
- CNC cut brackets
- Top rack dimensions 15" wide 11" long
- Top rack has RotoPax and hard case mounting tabs
- All mounting hardware included.
Top rack only, side racks sold separate.
Wraps around your K&N filter to keep water and small particles out of the filter itself. K&N DryChargers are manufactured from a durable polyester material and are pre-treated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your K&N air filter. The DryCharger will also stop small dirt particles; yet add little restriction to the airflow of the filter. The DryCharger can be installed under the Foam Wrap.
Pre-filter only, K&N air filter sold separate.
Many riders choose to convert over from the stock 525 to a 520 chain. Besides being lighter and less expensive, a 520 chain is more readily available as well as having more sprocket size options.
- Steel Sprockets
- EK SRO6 O-Ring Chain (clip type master link)
- Smaller 3 hole retainer
These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. These units have been given the seal of approval by the ProCycle staff for both performance and ease of installation. No disassembly of your forks, no drilling of damper rods. Just change the oil over to 5w and install the DDCs under the springs and hit the trails.
Here are the O-Rings you need when you perform an oil change. The largest one and the smallest one go inside the oil filter housing cover. The second largest one goes on your oil drain plug. The second smallest one goes on your oil fill plug. Replacing these O-Rings regularly will help keep your engine from seeping oil.
- Stock gearing uses a 15 tooth sprocket
- Use a 13 tooth sprocket for REALLY low off-road gearing
- Use a 14 tooth sprocket for off-road performance
- A 16 tooth sprocket will give you lower RPM at highway or street speeds
This luggage rack is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
Luggage plates will come with pre-drilled holes to suit rotopax mount. On request luggage plates can be pre-drilled to suit Givi top case mounting hardware.
DIMENSIONS
- Total Length: Approx 33cm
- Total Width: Approx 33cm closest to seat, approx 27cm at rear
B & B Off Roads Kawasaki KLR 650 master cylinder guard is made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All guards are supplied with all necessary mountings and stainless bolts. Made to cover and protects the rear brake master cylinder it looks great and is easy to install. Choose between polished or black polymer finish.
B&B Off Roads Yamaha WR450F bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
The Honda Maxi Luggage Rack and extension is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
DIMENSIONS
Maxi Plate:
Total Width Approx 45cm, Width of flat surface approx 40cm
Total Length Approx 33cm, Length of flat surface approx 33cm
Extension Plate :
Total Width: Extension Plate Approx 46cm
Will not fit adventure sports model. Please see other listing.
Protect vital engine parts and cases from rocks and debris.
- Clear anodized for corrosion protection and good looks
- Made from 3/16" 5052-H32 aluminum (some plates use .160" material)
- Smooth underside won't snag when crossing logs
- Oil drain hole on all required models
- Heat-treated chromoly steel clamps keep plates mounted securely
- All mounting hardware included
- Replacement clamps available
- Made in the U.S.A.
- Extremely versatile 4-liter rear Storage Pod is a great addition or alternative to the standard tank bag
- Cleverly designed removable tray with three large zippered storage compartments and a large map pocket
- Flatten or remove inner tray for one big storage compartment
- Dense thermo-molded pod has sturdy double zippers and is covered with a durable canvas outside with a soft inner shell
- Four web straps with coated hooks attach the Storage Pod to most bikes
- Height: 6” front, 4” back (15.2-11.4cm)
- Width: 12½” front, 9” back (31.8-22.9cm)
- Length: 13¾” (35.0cm)
FREECOM 4 brings new standards to riding in duo. With explosive sound, extra tough shell, and incredibly flat design, nothing comes close to FREECOM 4 abilities on the real road. No wonder it quickly became the world’s best selling rider-to passenger communicator.
Features:
- Universal Bluetooth connectivity.
- FM radio, full phone connectivity
- Charge while riding
- Automatic Volume Control, Mobile conferencing
- Music & Radio sharing, GPS, music streaming
- Natural Voice Operation,
- Connectivity with two Bluetooth mobile devices, Hybrid & Corded Mic, VOX, Parallel audio streaming (Android only)
- Cardo Connect App (iOS/Android)
- Intercom bike-to-bike range: Up to 1.2Km (0.8mi)
- Intercom overall range: Up to 3.6 (2.2mi)
- 40mm JBL interchangeable speakers
- Battery capacity: 850mha
- Bluetooth 4.1
- Battery operations: 13hrs/1 week talk-time/standby
- IP67 waterproof
- Give your bike peak braking performance with DP Brakes brake pads
- Pads have a quick break-in period so you get peak braking performance fast
- DP Brakes design and materials ensure consistent, hard stops and fade-free performance
- Pads give long pad life – sintered metal compounds outlast conventional organic or aramid fiber pads
- Made with DP Brakes' proven sintered metal pad material
- Gray-colored aluminum oxide-based ceramic material on backplate of pad keeps heat away from caliper piston and fluid in extreme conditions for fade-free performance
- Excellent initial bite and feel in both wet and dry conditions
- GG friction rated
- Quiet and non-abusive to most rotors; no brake dust or brake fade
Desire that aggressive look of a Grandprix Growler Exhaust System? Needing a little more mean to your lean bike? If so, you’ve come to the right place! HotBodies Racing has a great solution and a price that’s kind to your wallet. Our NEW MGP Growler inspired exhausts will scare the competition with its deep growl of power and performance while showing off HotBodies’ famous aerodynamic styling. This compact MGP Growler exhaust bolts on your ride with zero modifications, giving you the look of a polished Grandprix model.
ProCycle side panel guards to keep your saddlebags from fouling the side covers. Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.
Add Moose 20L Saddlebags for a very economical luggage solution.
Add Wolfman Rocky Mountain Expedition Saddlebags for a premium luggage solution.
- High Temperature UV Resistant Plastic
- 8mm Hole for Mounting Aftermarket Turn signals or Bolt with Block-off ability
- Stainless steel hardware included
- Sold in pairs (two mounting plates per set [for one left and one right side])
- You need to order TWO kits if doing the Front AND Rear of motorcycle
This bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
The simplest piece they make, in a 3, 4, 6, 9, 12 or 15 foot length. This is the runner they use on the bag snake and the side bag haulers.
This piece can be added into any luggage hauling scheme you can dream up.
SPECIFICATIONS:
Construction is a simple piece of 1" Nylon webbing with a loop sewn into one end.
They use the 4 foot length in the side bag hauler kits and the 6 foot length in the bag snake kits.
- The Core Manual TorqDrive clutch delivers unprecedented performance, tuning and durability
- TorqDrive provides more disks in less space, allowing up to four additional friction disks over stock
- More frictions = more torque capacity, thus unlocking the full power of your engine without the need to add stiffer pressure plate springs
- Provides more consistent clutch lever feel and behavior
- Can be set up to maintain a stock, or lighter than stock, lever pull depending on engine tuning
- Rekluse sleeves eliminate basket wear and notching
- Proven in racing at the highest levels
- Made in the U.S.A.
The Rally windscreen from Parabellum is the perfect protection from wind and debris without sacrificing technical off-road capabilities. This is an upright rally type windscreen that looks aggressive and performs well under all types of riding. Designed primarily for the off-road / dualsport enthusiast, this shield keeps pressure off the rider's chest while commuting from home to adventure and back.
This shield mounts simply to the stock headlight shroud using minimal hardware to keep weight down. The Rally Windshield measures 12.5 inches tall, 11.5 inches wide at the bottom, and 8.5 inches wide at the top. Made from 1/8 inch acrylic and offered in clear or tint.
The GP-1 Dual Sport Tire from IRC is designed to provide the best possible handling and control for both on and off the pavement. Special knobs penetrate loose surfaces for excellent traction, braking and cornering off the road yet won't wear off as fast as a full knobby when used on the street. Features include:
- Innovative knob design offers excellent off-road bite
- Won't be shredded on the highway like full knobbies
- DOT approved, 4-ply tire 90% on road, 10% offroad
- All GP-1's are Tube type tires and P rated (max speed of 94 mph)
NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.
Akrapovic has spared no expense with this titanium body and end cap with stainless steel mid pipe slip-on muffler. If you want the best in quality for your Tenere 700, look no further than this muffler. Complete with everything that you need to install and a removable sound insert for a more quite commute.
*NEW OFFERING
The Dynojet Auto Tune kit is an "add on" accessory that can be used with any of our Power Commander V’s. It connects to the PCV with a single cable and requires only a ground and +12 volt connection to be made to install. If your exhaust does not already have one, a "weld in" O2 sensor bung is included.
Once installed, the Auto Tune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the Power Commander V and automatically corrects it while you ride. Each map that we offer has preset Air/Fuel ratio values included that we find to be the best overall settings. This lets you simply plug in the unit and let it do the work.
POD-300 Digital Display
Simply connect the included CAN cable and you’re ready to go; there’s no need to tap power or deal with other messy connections.
- Real time fuel adjustments
- Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, speed, pressure, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
- Weather resistant for use in all conditions
- Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
- High contrast display, viewable in direct sunlight
- 3 Programmable light alarms
THE MOST ADVANCED RADIATOR PROTECTION SYSTEM AVAILABLE FEATURES
1. Maximum side and front impact protection-Using a combination of CNC machined 6000 series 3 dimensional aluminium extrusion and 5000 series alloy plate we have created a system to protect your rads from virtually every direction
2. Maximum roost and debris protection- Due to the angle fin design there is very little of the radiator core and veins that are directly exposed to roost, debris and trail side sticks
3. Maximum airflow -B & B’s unique aluminium front louver panel constructed from high strength extrusion allows 3 dimensional fins to be incorporated into the design to mimic the airflow characteristics of the genuine plastic fins
4. Removable finned louver panel- Front panel only requires 2 bolts to be loosened to allow for easy removal for cleaning
5. Integrated modular construction- Three piece modular construction allows for greater design flexibility eliminating the compromises inherent with one piece designs
6. Easy fitment no mods required- Guards can be fitted in approx ½ hour using basic tools
7. All parts available individually- If you damage any part of the radiator guards, B&B's design allows you to purchase only what you require.
- An on-bike GPS system with all the features you've come to expect from Trail Tech
- View, organize, edit and share entire trail systems in 3D
- Designed specifically to meet the needs of off-road riders
- 240x400 LCD display - Readable even in intense sunlight
- Crash resistant, off-road design
- Upload routes from any GPS
- Customizable user screens
- Accurate tracks, even in the toughest terrain
- Runs on vehicle power or internal battery
- Back-lit for operation in the dark
Tired of paying too much for OEM paper filters? Drive in wet/rainy weather? Get an K&N filter for your ruckus! K&N filters are reusable, waterproof, and will save you money over the life of your scooter.
- Fits in the stock air box with no modifications needed.
- One filter will last the lifetime of your scooter with proper maintenance
- Increased air flow over the stock air filter
- Four layers of premium cotton gauze provides outstanding filtration
- Washable & re-usable, never wears out
- K&N filters are waterproof. Perfect for wet weather riding where a stock paper filter would get destroyed.
The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.
- Uses long-life muffler packing for increased packing life
- Forest Service approved spark arrester
Delayed stock from manufacturer, please ask for availability.
Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.
Kouba lowering link will lower the rear 1.75". Comes with bearings and seals installed for a quick and easy installation. Instructions included. WILL NOT FIT THE CRF250L RALLY OR CRF300L.
This is the ultimate radiator guard for the CRF250L. Protects your radiator from both front and side impacts.
A rear mounting bracket provides that extra support. Constructed from 1/8" aluminum, the kit includes all necessary mounting hardware for a very simple installation.
The Edge-2 Tail Light and License Plate Holder is a simple bolt-on replacement for the stock unit. Included is an aluminum mount for the light and license plate that is model specific. The light unit uses 16 high-intensity red LED's for tail / stop light function. 3 white LED's are used for license plate illumination.
Included is a set of turn signal brackets that bolt to the mount. These are designed for a smaller LED type signal with a 8mm mounting stud. Or consider the Edge-2 Upgrade Circuit Board as this converts your brake light into a functioning turn signal as well!
Use this tool to check for air leaks in two-stroke engines. It includes air pressure gauge, pump-up bulb and most fittings and adapters for single and twin-cylinder two-stroke motorcycle engines. Packed in a convenient carrying case with instructions.
For use with Quad Lock® mounts and accessories sold separately. If your phone is not listed, contact us for other model cases available or select the Universal Adaptor.
SECURE MOUNTING
Featuring a Patented Dual-Stage Lock that’s quick and easy to attach / detach, but secure enough to lift up to 80 kg / 176 lbs (yes, they've tested). It’s all in the technique, not in the force.
PROTECTIVE / IMPACT RESISTANT
We would never suggest throwing your device off a double story building, that’s just silly. But with a tough, polycarbonate core and impact absorbing TPU edge-to-edge outer shell, you can be confident that your device will be protected in your everyday activities.
SLEEK DESIGN
The slim profile and soft touch material make it perfect for everyday use. Simplicity is key in all of our design, no showboating here.
And yes, it’s compatible with wireless charging.
- Secure Quad Lock® interface
- Composite construction (TPU / PC)
- Microfibre lining
- Impact absorbing shell
- Compatible with wireless charging
Please Note:
Due to the wrap-around nature of their cases, some glass screen protectors are not compatible
- Microfibre lining (excluding the iPhone 5/5s/SE Cases)
B & B Off Roads Honda CRF300L bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.