Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.

Search Products

Flywheel Puller

TTR125 '00 - '23

Universal 3 bolt flywheel puller

$48.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Top Rack, Nomadic

XR650L '93 - '23

Simple, lightweight rack made from rugged 1/8" 5052 Aluminum, with a rigid 5-point mounting system.

Low profile allows for easy seat removal.

Features:

  • 12" long by 10" wide
  • Integrated turn signal mounts
  • 16 strap slots for securing cargo
  • RotoPax mounting kit compatible
  • All hardware and instructions included

Note: Placement of this top rack does require removal of the stock tool bag.

 

Add Container Mount
Add Rotopax Containers
$89.95

An OEM type replacement for the mighty XRL from the folks at Fuel Star. Single inlet that threads directly onto the stock fuel tank. Also works on the adapters that come on some aftermarket large capacity plastic tanks (like IMS).

Kit comes with a new Petcock, O-Ring, Fuel Line and Fuel Line Clamps! Everything you need for a complete fuel connection replacement.

$59.95

Genuine KEIHIN replacement parts for your FCR41 pumper carb. Ensure your beast is getting fed when it needs it!

  Not for the stock carburetor. Fits FCR41 conversions only.

$42.95

The OEM vent foam filter can deteriorate after only a couple of years. When it does it can allow enough dirt into the engine to do significant damage. Replace your filter now with a washable cotton & steel screen filter.

 This filter needs to be oiled like any other foam air filter to work properly.  Its only for bikes with the stock BST40 carburetor!

$18.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shift Lever, Folding

XR650L '93 - '23

Replacement shift lever with folding tip for use with OEM footpegs.

$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Speedometer Cable

XR650L '93 - '23

A quality replacement speedometer cable

$15.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Throttle Cable Set

XR650L '93 - '23

A quality set of replacement throttle cables from Motion Pro.

Add Cable Lubricant
$36.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Rotor, Rear EBC

XR650L '93 - '23

Carbon steel brake rotor. Makes it easier to swap over your spare rear wheel.

$109.95

Protect your master cylinder from damage

  • Fabricated from mild steel
  • Powder coated flat black
  • Easy installation, all hardware included
$43.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Master Cylinder Guard, Rear

CRF250L '13 - '16 CRF250L Rally '17 - '23
  • Protect the exposed rear brake master cylinder from damage
  • Fabricated from mild steel and expanded metal
  • Powder coated flat black
  • Easy installation with all required hardware provided
$44.95

Bolt on horsepower! Stage 1: single-cam motor. Excellent midrange and top-end power increase. Uses stock valve springs and rockers.

$149.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

XR650L '93 - '23 XR600 '88 - '19

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Each individual seat model has been specially designed to increase comfort without compromising rideability. The more aggressive the bike, the more aggressive the seat-kit.

  • Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.
  • Choose standard height or one inch lower than stock.
Choose Seat & Cover
Add Kit
$179.95

This kit is not just a bulb, but an entirely new LED specific headlight! A specially designed adjustable steel mounting bracket replaces the stock unit. Included is a wiring harness and all the required hardware to make this installation quick and easy and entirely plug and play. No cutting, no drilling, no wiring modifications are necessary. The headlight features separate low and high beam projectors in a custom headlight shell designed specifically for this LED bulb.

Now available with a Black headlight housing!

This kit is available with either a chrome or black chrome reflector in the headlight

Check out the images below for stock vs. LED patterns and brightness images. (Images are of a DR/DRZ unit, but the light unit is the same as that on the XRL.)

Choose Color
$119.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Stator, High Output 260 Watt

XR650L '93 - '23

A new high output stator for the XR650L. 25% more output than the stock unit. Approximately 50 additional watts. Now you can have enough power to run those driving lights and/or heated riding gear!

Dielectric Grease
$129.95

The EVO-R Muffler from Big Gun features a hard-anodized, oval-shaped aluminum muffler with a red powder-coated stainless steel end that has a removable screen-type USFS approved spark arrestor. It has a TIG welded reinforced bracket and is a thin design allowing for maximum clearance and great weight savings.

The header and mid-pipe are constructed from 304 stainless steel and when combined with the muffler provides startling improvements in horsepower and torque.

Choose Package
$679.95

Kit includes:

  • 155 Main Jet
  • 40 pilot jet
  • #35 leak jet
  • EMP needle

 Not for the stock carburetor Fits FCR-MX conversions Only.

Add Pocket Tuner Tool
$32.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Swingarm Bearing Kit

XR650L '93 - '23

Complete Pivot Works kit to replace the bearings and seals in the XR650L swingarm pivot.

Add Grease
$75.95

The complete fork upgrade kit - your choice of springs and Race Tech Gold Valves. Also includes a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.

You can select from various straight rate springs or even progressive springs to customize the package to your needs.

$349.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Chain Slider Components

XR650L '93 - '23

Chain sliders and guides tend to wear out over time due to chain friction. Replace worn out components with genuine Honda parts!

  • Click on image to enlarge
  • Select part
  • To add multiple components, add to cart one at a time.
Choose Component
$36.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shift Lever, Folding

CRF250L '13 - '23 CRF250L Rally '17 - '23

Forged aluminum, black anodized arm and Knurled CNC aluminum shift tip.

$28.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Chain Guide, B&B Off Road Engineering

XR650L '93 - '23 XR250R '96 - '04 XR400R '96 - '04 XR600 '85 - '00 XR650R '00 - '08

Super sturdy guide to keep your chain on the sprockets, where it belongs! You never know when a rock bash can cause your chain to derail causing all kinds of troubles.

$92.95

FCR-MX Carburetor Rebuild Kit

 Not for the stock BST DR650 carburetor, Fits FCR-MX conversions Only

Add Pocket Tuner Tool
$44.95
  • Designed to quickly and precisely remove outer bearing race from the steering head without the use of a hammer and punch
  • Puller design ensures bearing is pulled perfectly straight to eliminate possible damage to frame
  • Works on all tapered bearing races from 47 mm to 55 mm OD
  • Precision machined anodized aluminum cup will not damage seal surface
  • Brass bearing washers for easy use and long life
  • Hardened steel jaws engage securely on inner bearing lip
  • Lifetime limited warranty
$85.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Pad Set, EBC

XR400R '96 - '04 XR250R '96 - '04

EBC brake pad set front & rear.

  • Sintered Pads are best for regular riding. Long life, and good performance in all conditions
  • Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand
  • Race Sintered are designed for racing use
Choose Type
$69.95

A kit that includes an Axle Wrench combo for your bike with a 19mm for the front, and a 24mm for the rear. Just 7 1/2" long, it is long on leverage, but short enough to fit in even the smallest tool kit.

Also includes a pair of 'trail size' small tire irons.

$31.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wheel Axle Wrench, Moose

DR650 '96 - '23

The Moose Axle Wrench combo for your DR has a 19mm for the front, and a 24mm for the rear. Just 7 1/2" long, it is long on leverage but, short enough to fit in even the smallest tool kit.

$21.95

The race-bred RS-3 exhaust has proven to be extremely popular among rider looks for a combination of performance and value. It enhances performance dramatically, provides an enviable exhaust note and offers the unmistakable look and sound of Yoshimura. RS-3 mufflers feature a straight baffle that leads to a single turn-down machined aluminum end cap. Sleeve available in stainless steel with aluminum end cap.

Choose Year
$399.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Rotor Bolts

DR650 '96 - '23

A fresh set of brake rotor bolts. These bolts already have thread lock compound applied to the threads.

Stock OEM works with factory rotors and comes in a pack of 6.

For aftermarket rotors like Warp 9 or EBC front and rear sets are available. 

Front comes in pack of 6, and Rear comes in pack of 4.

Choose Rotor
$18.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Rotor, Front EBC

DR650 '96 - '23

Made with heat-treated carbon steel for longer wear life and reduced galling. Stock size, simple bolt-on procedure.

$105.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Lowering Links

SV650 '99 - '02

Yana Shiki Billet aluminum lowering links. Three-position links allow you to keep it in the stock position or lower the rear suspension 2 or 4 inches.

Choose Year
$38.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Kits

DR650 '96 - '23

Quality components at a great price.

  • Standard Kit: Includes SS braided lines and EBC sintered brake pads.
  • Standard Plus Kit: Includes SS braided lines, EBC sintered pads and an EBC Carbon Steel front rotor.
  • Super Plus Kit: Includes SS braided lines, EBC sintered pads and EBC carbon steel front and rear rotors.
  • Deluxe Kit: Includes SS braided lines, EBC sintered pads and an EBC 320mm SM front rotor kit.
  • Super Deluxe Kit: Includes SS braided lines, EBC sintered pads, an EBC 320mm SM front rotor kit and EBC rear rotor.
Choose Package
$159.95

 

Progressive springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. These springs are significantly stiffer than the wimpy stock springs.

They will make a big improvement in front fork action while still delivering a smooth ride. Made in the USA by 'Progressive Suspension'. Sold in pairs.

$96.95

Steel cargo rack from Moose Racing. It features a nice wide platform and a durable powder coat finish. 17" wide and 10" long.

$199.95

Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.
The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.

$9.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Carburetor Kit, TM36 Pumper

XR400R '96 - '04

Better throttle response. More power over a much wider range. Kit includes pre-jetted Mikuni TM36 Pumper carb and push/pull throttle cables. Everything is included to mount this carb to your bike. Well suited for stock to mildly modified motors.

Add Pocket Tuner Tool
$469.95

The complete fork upgrade kit - Race Tech springs and emulators. Also includes a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.

Choose Spring Type & Year
$339.95
  • Stage 1: Excellent mid-range and top-end power
  • Stage 2: More mid-range and top-end power, for big-bore & stroker applications
  • Stage 3: Recommended only for big-bore stroker applications only
Choose Stage
$219.95

Laminar Speed Shields are designed to provide lower wind pressure in the chest area to help reduce rider fatigue. Short enough to not be in the way when standing up on the pegs. Mounts directly to the stock headlight cowling with all hardware provided and no drilling required!

Choose Color
$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Kit, EBC

XR250R '86 - '95
  • Complete set of friction plates, steel plates, and springs
  • Heavy-duty springs help prevent clutch slip
  • Restores proper stack height, fixes clutch slip caused by wear and tear
Choose Year and Model
$84.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Rack, Pat Walsh Designs

DR650 '96 - '23

The Pat Walsh rack has been a favorite of DR riders around the world since it was first introduced in 2009. They've continued to improve it each year and the new design is their best yet.

  • Large 12"X10" surface area
  • Solid 4-Point frame mounting
  • Rugged 1/8" 5052 aluminum
  • Laser-cut and CNC bent for precision fit
  • Use with or without stock hand rail
  • Integrated turn signal mounts if you choose to remove stock grab rail
$119.95

Make the installation as easy as possible with this Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight Circuit Board Upgrade making the connection simple. Stock plug will go right into this unit and off you go. You will need a crimp tool or set of needle nose pliers to crimp connectors on.

$10.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

Foot Pegs, Lowered ProCycle

DR650 '96 - '23

Our complete foot peg assemblies. 1-3/4" lower than stock. No extra brackets that hang down below the frame. Easier on the knees. Wider platform Yamaha YZ style footpegs are stronger and give you firmer footing. Mount solid to the frame. No more 'droopy' feeling when standing on the stock pegs. Lowering your footpegs makes it easier to stand and less of a reach down to the bars when standing.

Now you can get our Low Pegs with MK4 Pivot Pegz or black Fastway ADV pegs (both Yamaha YZ pegs) installed!

Choose Type
$179.95

Quality steel sprockets and EK SR06 525 O-ring chain. Available in gear ratio choices from - 13/42 to 16/46. EK SR06 525 chains come in 120 link length and may have to be cut down to fit. They also come with rivet type master links. Clip type links are available below.

 13 and 14 Tooth sprockets require a smaller retainer

Add SS C/S Sprocket Retainer
$149.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Pad Set, EBC

KLX250S '06 - '07

Kit includes front and rear brake pads.

  • Sintered Pads are best for regular riding. Long life, and good performance in all conditions
  • Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand
Choose Type
$55.95

Fastway offers a large ADV peg that is 4.75" long and 2.25" wide. With these pegs you can adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. These pegs come with two sets of F3 cleats (one standard, one long). You can order serrated or spiked cleats separately.

These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.

Add Foot Peg Cleats, Fastway
$274.95

Billet levers that are short enough to provide clearance for your hand guards. Warp 9 Flex Brake Levers are machined billet, anodized and hinged with a CNC machined master cylinder interface. Adjustable reach allows customization to the rider's hand size. Double hinge design allows lever to flex out of the way in most impact situations. These high quality levers are approximately 1/2" shorter than stock. Brake lever includes a nice billet clamp with nylon sleeve to allow the assembly to rotate on impact. These levers work with the stock brake light and clutch safety switches. Will not fit with the stock OEM wind deflectors.

 Will not engage the clutch switch on 2010 and later models

In stock with limited availability in Clutch Lever only, discontinued item.  "3-Finger" levers still available.

$39.95

We start with silver Excel or Sun rims, OEM hubs or your hubs shipped to us, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are then precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • New OEM hubs or your hubs shipped to us
  • Excel or Sun 3.5" x 17" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Please call us for a return authorization number before shipping your hubs.

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

 

Choose Year & Hub
$999.00
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Circuit Board, Plug & Play Connector Edge-2

DRZ400S '00 - '23 DRZ400SM '00 - '23

Make the Edge-2 Circuit Board installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. You will need a crimp tool or set of needle nose pliers to crimp connectors on.

$10.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Control Cables

DRZ400 '00 - '03 DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07

High quality replacement cables from Motion Pro.

Choose Cable
Add Cable Lubricant
Add Cable Luber
$21.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Lever Set, OEM Replacement

DR650 '90 - '09

A set of replacement brake and clutch levers. Standard length. Sold as a set.

Please notice that there is a difference in sets from 90-09 and from 10-current! Order the set for your model year DR.

Choose Year
$22.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Rack, Nomadic Adventure Rear

WR250R '08 - '18 WR250X '08 - '11

Wide Adventure rack for the WR. Precision laser cut from .25" 5052 aluminum then powder coated black with a shot peened look. This rack is 11" x 17.5" and has numerous tie points for straps or bungees to secure a load. It is pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.

$98.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Top Rack, Nomadic Dual Sport Rear

WR250R '08 - '18 WR250X '08 - '11

A small light-duty Dual Sport Rack for the WR. Precision laser cut from 3/16" 5052 aluminum. It is powder coated black with a shot-peened look.  This rack is 9" x 10.5" at widest points and has numerous tie points for straps or bungees. It's pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in about 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.

$58.95

Hydraulic Clutch Bleeder Kit includes 2oz of Magura Blood clutch fluid, 2 bleeder tools and fittings to properly bleed your hydraulic clutch. Great if you have air infiltration in the system or damaged it in some fashion.

$32.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Side Racks, Happy Trails SL

WR250R '08 - '18 WR250X '08 - '11

The Happy Trails SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags.

Features:

  • Thoroughly tested 4th generation side racks
  • Three point mounting system (includes mounting hardware)
  • Strong 5/8" round tubing for the arms and SL mounting loop
  • Racks add protection for the bike in the event of a tip-over
  • Each rack is fabricated by expert craftsmen
  • Racks finished with a black powder coat

 

$224.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Master Link, OEM Chain

DR650 '96 - '23

This is a RIVET style master link that fits the original OEM Suzuki chain. The original chain is marked DID 525 V8. If you need a master link for your stock chain, this is the one.
There is not a clip-style master link available.

$12.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Pad Set, EBC

DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07 DRZ400 '00 - '03

This will give you a complete SET (Front and Rear) of brake pads.

  •     Sintered Pads are best for regular riding -long life, and good performance in all conditions
  •     Sport Carbon pads are made for fast riding in dry conditions - not recommended for mud, water, or sand
  •     Race Sintered are designed for racing use
  •     Includes front and rear brake pads
Choose Type
Add Brake Fluid
Add Brake Bleeder, Mini
$55.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foot Pegs, Adventure Fastway

WR250R '08 - '18 WR250X '08 - '11

Finally, the ultimate Adventure peg, from the folks at Fastway - Pro Moto Billet. This peg is big enough to stand on all day with no fatigue, it measures 2.25" front to back and is 4.75" wide.

In addition to the big size, you can also adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. You can further customize them with 3 styles of patented adjustable threaded cleats. Take your traction from comfortable to gnarly. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. You can also order serrated (F5 - bottom left image) or spiked (F6 - bottom right image) cleats separately.

These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.

Choose Color
Add Foot Peg Cleats, Fastway
$274.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shock Linkage Bearing Kit

KLX250S '06 - '14

Complete high quality kit to replace the bearings and seals in the KLX250S shock linkage. Includes the lower shock bearing.

Add Grease
Add Lubricant
$79.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Master Cylinder Rebuild Kit, Rear Brake

WR250R '08 - '18 WR250X '08 - '11

All the parts you need to freshen up your rear brake master cylinder. New piston, seals, return spring, boot and snap ring.

Add Brake Fluid
Add Brake Bleeder, Mini
$25.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Caliper Rebuild Kit, Rear

WR250R '08 - '18 WR250X '08 - '11

All the parts you need to freshen up your rear brake caliper. New piston seals, slide pin and boots. Fix that sticky or limp rear brake.

Add Brake Fluid
Add Brake Bleeder, Mini
$24.95

Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.

  Note! The head of the pivot pin you are going to remove must be ground down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!

$16.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Muffler, Slip-on DG Performance V2

DRZ400S '00 - '23 DRZ400SM '05 - '23

The V2 Series Slip-On muffler features an aluminum body, TIG welded components, stainless steel inlet tube and a great new look. This Lightweight Slip-On weighs approximately 5.5 lbs.

The DG Performance systems offer increased throttle response, power and torque. Standard sound level is approximately 98 db. Equipped with a US Forestry approved spark arrestor.

Choose Model
Add Exhaust Gaskets
$364.95

Exhaust Gasket

DRZ400 '00 - '03 DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07

The headpipe gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head, thereby making them a single use part. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.

The muffler joint gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers (Q4 or PowerCore 4) do not require a joint gasket but the all other aftermarket mufflers as well as the stock muffler do require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.

Choose Gasket
$14.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Muffler, Slip-On LeoVince X-3 Enduro

DRZ400S '01 - '08 DRZ400SM '05 - '08

No repacking required! The Leo Vince X3 Enduro is made with TIG welded stainless steel internals and aluminum outer shell. It features a semi-direct chamber design that is maintenance free. It's quiet too! Our own in-house testing showed a 84dB sound level using the USFS J1287 testing procedure. 84dB is louder than stock but significantly quieter than any other aftermarket muffler. It includes a certified Spark-Arrestor.

 

 This muffler works on OEM header only!

$433.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gold Valves - Forks, Race Tech

DRZ400S '02 - '23 DRZ400E '00 - '07
  • Race Tech's original bolt-on fork valving system for front cartridge forks
  • Triple the flow area of pistons
  • Put valving control on the shim stack
  • Outstanding tunability; improved control, traction, plushness and bottoming resistance
  • Complete instructions, Gold Valve pistons, valving charts, valving shims
  • Technical Edge Fork Maintenance and Gold Valve Installation video all included
$179.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Carburetor Repair Kit

DRZ400S '00 - '23 DRZ400SM '05 - '23

Repair kit comes with everything you need to get your carb back in shape.

Add Pocket Tuner Tool
$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Filter, Twin Air

DRZ400 '00 - '03 DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07

Twin Air Filter's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.

The air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air-the #1 filter system proven on motocross tracks around the world.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.

No Toil Care Kit
$34.95

Jet Kit, JD Jetting

DRZ400 '00 - '03 DRZ400S '00 - '23 DRZ400SM '05 - '23

This kit is for the 36mm BSR Mikuni CV carburetor and includes 2 Needles that have been developed by JD Jetting and manufactured for them to their exacting specifications. These two needles allow a wide range of tuning possibilities and provide correct fuel delivery at any throttle position.

4 allen type screws for the top of the carburetor are also enclosed should you strip out the stock screws during your tuning process. Complete instructions with photos, jetting suggestions for different set-ups and situations, 5 Main Jets, a Pilot Jet and a drill bit complete the package.

Choose Option
Add Pocket Tuner Tool
$84.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Carburetor Kit, FCR39

DRZ400 '00 - '03 DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07

This kit replaces the stock carburetor with a true pumper carb. This will bring out the beast in the DRZ.

Kit includes a brand-new carburetor, throttle cables and a new throttle assembly (which is required for the new pull-push cable system).

Add Pocket Tuner Tool
$889.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Case Saver, Heavy Duty B&B Off Road Engineering

DRZ400 '00 - '03 DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07

B&B Heavy-Duty Front Sprocket Case Saver.

The 6mm aluminum base will protect your engine cases should your chain ever break. On top of that is a 4mm thick custom carved plate to keep your pants and other things out of the chain as well. Works with both the 14 and 15 tooth sprockets. A great investment.

$88.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Radiator Hose Kit

DRZ400S '00 - '23 DRZ400SM '05 - '23
  • High-temperature silicone guaranteed to 356° F
  • Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
  • Single molded, Y-piece hoses eliminate the need to reuse OEM 3-way fitting which reduces weight and eliminates leak points
  • Three layers of reinforcement fabric offer high burst pressures and provided better debris/crash resistance
  • UV stable colors don't fade with heat or sun and are color matched to OEM brands
$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Case Covers, B&B Off Road Engineering

DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07

Clutch and Ignition covers made by B&B Eng. Formed from 2mm thick 5052 aluminum plate, selected because of its strength, corrosion resistance, excellent abrasion and impact protection. These will help protect your cases in the event of a bad fall.

These covers are attached to the engine cases with high quality heat resistance silicone adhesive

 These covers will NOT fit early kick start only models that did not come standard with electric start. If you have added a kick starter to your bike that came with an electric start, covers will fit with no problem.

Choose Cover
Add High-Temp Silicone
$103.95

Made from laser-cut, medical-grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area over many paper filters, catching debris down to 35 microns. The FLO filter pleat seam is welded and able to withstand up to 600 deg. F. Filter maintains consistent flow under all conditions including extreme heat, the presence of water and cold start-ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine.

This cleanable oil filter should be the last one you ever purchase.

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Adventure Seat, Moose

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '23 DRZ400SM '05 - '23

Complete replacement seat.

You must choose between the stock seat height or a low seat height (about 1 inch lower).

  • Rugged micro-fiber suede top cover provides rider comfort and confidence
  • Side gripper panes keep you aboard during aggressive maneuvering
  • Smooth marine-grade vinyl with debossed Moose Racing logo
  • Comes with strap kit that enables you to confidently secure cargo to the pillion section of your seat
Choose Height
$366.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Dual-Sport Riding Comfort, Corbin Seat

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '23 DRZ400SM '05 - '23

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.

 Corbin seats are built to order. Lead time on building a seat is 2-3 weeks.

 

Choose Top Texture
Choose Side Texture
$445.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Skid Plate, B&B Off Road Engineering

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '23 DRZ400SM '05 - '23

Replace the wimpy stock DRZ400 Skid Plate made from 4mm thick 5083 aluminium plate. Strong and great looking. Leave the stock wings in place and give yourself something that will really stop any damage between the frame rails. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.

Choose Finish
$123.95

The stock tail light, blinker and license plate bracket is rather large and cumbersome, to put it politely. The B&B Off Road Engineering unit is simple and tidy and gives you a LED tail and brake light unit, a LED license plate light and turn signal mounts as well.

Installation is easy - remove the stock unit and bolt the new unit in the same location. Off with the old and on with the new in minutes. All necessary hardware included.

Choose Option
$145.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Kickstart Kit

DRZ400 '00 - '03 DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07

Add a backup kick start system to your electric start DRZ400. Complete with everything you need to add the kick starter to your bike.

This kit will fit all DRZ400s but the manual decompression lever can only be installed on the 2006 to Current DRZ400 E models.

$249.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Skid Plate, Carbon Fiber E-Line

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '16 DRZ400SM '05 - '16

The use of Kevlar gives this composite a longer fatigue life and greater tensile strength than aluminum. Composite plates will bounce back from hard hits and look great long after aluminum plates give up.

$189.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Camshaft, Performance HotCams

DRZ400 '00 - '23 DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '23

As the leader in innovation, design and development of aftermarket high-performance camshafts, Hot Cams is certain to provide the added boost that enthusiasts are looking for.

Designed, dyno proven and made in the USA, Hot Cams performance camshafts are one of the most economical, reliable and easy to install ways to add a 5-10% power gain to your bike.

Stage 1: These cams provide better low RPM torque, pulling power, and throttle response.

Stage 2: These cams will provide improved full throttle torque and horsepower starting at 4000 RPM and up.

Choose Stage
Add Cam Chain, Wiseco
Add Camshaft Installation Tool Kit
$349.95

This new unit from JNS will protect your cases from the damage caused by a thrown chain, and will also keep your pants, boots or foot safe from your countershaft sprocket. The case saver portion is laser cut from .25" aluminum and then has the .19" aluminum countershaft sprocket cover welded to it and the entire unit is powder coated black. All the mounting hardware is stainless steel with machined aluminum spacers also included.

All JNS products come with a lifetime warranty against defects in materials and workmanship.

$79.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Side Panel Set

DRZ400S '00 - '23 DRZ400SM '05 - '23 DRZ400E '00 - '07 DRZ400 '00 - '03

Quality parts from Acerbis. Replace those big white ones with black ones for a custom look, or you can just replace your trashed white ones with crisp clean new ones for that great stock look.

Choose Color
Add Heat Shield
$40.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cush Hub Bearing & Seal Set

DR650 '96 - '23 DR350S '90 - '93 DR350SE '94 - '95

The cush hub (sprocket carrier) bearing leads a tough life. This is especially true if your cush rubbers get old and soft. They can allow the chain to pull the cush hub sideways putting a twisting load on the bearing. If there's any question about the condition of your bearing replace it now with this double sealed bearing and quality seal.

$14.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Radiator Guard, Moose Racing

WR250R '06 - '18 WR250X '06 - '11

Moose Racing's Heavy-Duty, 4mm thick 5052 aluminum, to protect expensive and fragile radiators from side impacts and twisting.

  • Includes all necessary mounting hardware and instructions
  • Not compatible with over-sized gas tanks
$57.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Gas Tank, IMS 4.7 Gallon

WR250R '06 - '18 WR250X '06 - '11

IMS Products 'Adventure Tank' for the Yamaha WR250R/X. They call this an Adventure tank because it maximizes your capacity preparing you for those extended trips without the need to stop and fill up. This tank has a 2.75 gallon advantage over the stock fuel tank and it handles it well.

IMS made this tank to replace the stock radiator shrouds and keep the fuel down low for a lower center of gravity, improving the handling and stability of the bike. They also have installed a lift pump to allow the stock fuel pump to stay in the standard position while efficiently utilizing the entire capacity of the tank. It is available in Natural, Black, Blue, Red and White.

$411.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Shoes

TW200 '87 - '91

Replace those worn out brake pads or shoes with quality EBC replacements.

  • EBC brake shoes are radius ground, and edge trimmed
Choose Year
$21.95

You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.

The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.

  Not for any DRZ400 or Royal Enfield Himalayan

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Speedo, DRD

CRF250L '13 - '23 CRF250L Rally '17 - '23

The Speedo DRD corrects and fixes the speed signal after it was altered by something else, such as sprocket changes or tires size changes or transmission changes.

The Universal Kit does require some basic wiring to install. It's fairly easy, and only 4 wires; [positive, ground, signal-in, signal-out]. Universal Kit works for Cars, Trucks, & Motorcycles with digital odometers, and 3 wire speed sensors.

  • Smallest electronic speedometer/odometer calibration device in the world
  • Simple plug-in installation
  • Weather proof design to protect against the elements
Choose Option
$79.95

Savvy DR650 owners will remove the upper chain roller. You can use this stainless steel button head screw to plug the threaded hole. Suzuki did not make the upper roller mount strong enough. If you don't remove it yourself the chain will likely do it for you - along with a chunk of metal out of the frame.

$1.95

Clean up the backside of your TW200. This kit includes a bracket and a super bright LED Tail Light. The bracket mounts under your rear fender using your existing bolts and has slots in it to mount your license plate. The LED light unit features a set of LEDs that light up for your tail light and a brighter set that light up when you apply your brakes. The LED light unit also features a few white LEDs on the underside of it that light up your license plate to keep you legal.

$64.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Muffler, Slip-On FMF Q4 Hex

CRF250L '13 - '16
  • The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
  • Constructed from aircraft grade aluminum and high strength stainless steel
  • Sound output 96dB
  • 8 pounds lighter than the stock muffler
Choose Year
$399.95

Replace your lost or broken stock plastic chain guard with a JNS aluminum one. Laser cut, CNC formed, TIG welded, and powder coated a beautiful satin black. This is a direct replacement for the stock unit. All JNS products come with a lifetime warranty against defects in materials and workmanship.

  Please note that this unit is a bit wider than the stock one and will have to be trimmed if you are running a big fat SuperMoto wheel/tire.

$52.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Swingarm Bearing Kit

WR250R '08 - '18 WR250X '08 - '11

Complete Swingarm Bearing kit to replace the bearings and seals in the WR swingarm pivot.

$76.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shock Linkage Bearing Kit

WR250R '08 - '18 WR250X '08 - '11

Complete kit to replace the bearings and seals in the WR shock linkage. Includes the lower shock bearing.

$86.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Spark Plug Caps, NGK

DR650 '96 - '23

Direct replacement for old or broken stock spark plug caps, made by industry leader NGK. Spark plug caps contain a resistor that can burn out with age. Fresh caps ensure your motor gets a strong spark. Sold in pairs.
 

$11.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Front Countershaft Sprocket

TW200 '87 - '23

High quality sprockets by PBI

  • Stock size is 14 tooth
  • Add teeth for highway riding
  • Subtract teeth for low end gearing

  Counter shaft sprocket replacement requires the removal of the left side case cover. A new gasket may be required. This is also a great time to replace that leaking oil seal!

Select Tooth Count
Add Gasket
Add Countershaft Oil Seal Kit
$15.00

Don't want to buy a new shock? This rebuild makes the stock shock about 10 times better. We send shocks to Cogent Dynamics. They clean them up, hard anodize the bodies for better wear, and install new Shock Shaft Assemblies with rebound damping adjustment.

Any aftermarket spring for your stock shock will fit on this shock. If you are using the original spring, you will want to order a stiffer spring to go with your new shock. Our 7.5 kg/mm rear spring is 16% stiffer than the stock one and is perfect for the majority of riders. If you are a larger rider, or carry a lot of gear or a passenger (total weight exceeding 250 pounds) you will probably want the 8.3 kg/mm rear spring which is 28% stiffer than stock.

Low shock also available. This option will lower your seat height 1" without the need for lowering links. All other features of this shock are the same as the stock height.

! Please click on the link below for information on core charges and how to ship your shock to us. (If you select to add the core charge please include in the comments at checkout if store credit or refund is preferred) 

Choose Option
Add Shock Core Charge
$637.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Filter, Uni

KLX250S '94 - '23
  • Designed to fit in the factory air box exactly like original filter
  • The best selling replacement air filter for competition motorcycles and ATVs
  • Unique two stage design allows for easy and complete cleaning
  • Dual layer of foam, can be serviced separately
  • Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"
$28.95