Seats
This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.
- Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
- Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
- Open mesh side panels allow heat to escape
- Easily inflates by mouth with no pump needed
- Mounting straps and Repair patch kit included
9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.
Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.
CRF450L '19 - '24 CRF450X '19 - '24
This seat is black 'carbon fiber' on top and 'asphalt' on the sides, with red welts, exactly as shown. Slight discrepancies with cover under seat, and slightly off center foam thickness, indicated in pictures. As is, no warranty.
Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.
Armor - Bike Protection
Replace the wimpy stock DRZ400 Skid Plate made from 4mm thick 5083 aluminium plate. Strong and great looking. Leave the stock wings in place and give yourself something that will really stop any damage between the frame rails. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.
The B & B Eng. DRZ400 Bash Plate is made from 4mm thick 5083 aluminium plate. Strong and great looking, this is the top of the line protection plate for the DRZ. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.
Clutch and Ignition covers made by B&B Eng. Formed from 2mm thick 5052 aluminum plate, selected because of its strength, corrosion resistance, excellent abrasion and impact protection. These will help protect your cases in the event of a bad fall.
These covers are attached to the engine cases with high quality heat resistance silicone adhesive
These covers will NOT fit early kick start only models that did not come standard with electric start. If you have added a kick starter to your bike that came with an electric start, covers will fit with no problem.
Protect your frame/paint from scuffs and scratches with frame guards. The DRZ 400 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.
Give your DRZ that factory prepped look and protect your frame.
These frame guards from industry leaders Works Connection are CNC cut and formed from aircraft grade 5052 aluminum. These not only protect your frame from scuff and rub marks from your boots, but also give you a flatter surface for better grip and control with your lower legs. All the necessary mounting hardware is included making these a very simple bolt-on installation.
One of the most advanced radiator protection systems available for the DRZ400. These guards feature maximum side and front impact protection by using a combination of CNC machined 6000 series aluminum and 5000 series alloy plate to create a complete system to protect your radiators from virtually every direction. Roost and debris protection is exceptional thanks to the angle fin design that leaves minimal exposure to the radiator core and veins.
Even with all of this protection, cooling airflow is still at its maximum with a front louvered panel built with fins designed to mimic the airflow characteristics of the OEM plastic fins. This panel can be removed easily facilitating cleaning of the radiator.
Three-piece modular construction eliminates the design limitations of one-piece designs. Integrated modular construction- Three piece modular construction allows for greater design flexibility eliminating the compromises inherent with one piece designs. Easy fitment no mods required- Radiator guards can be fitted in approx ½ hour using basic tools. Sold in pairs, but repair parts are available individually.
Can be fitted with 17L safari tank & Acerbis tank
Will not fit the "S" & "SM" model if thermo fan is fitted
Radiator guards from Devol Racing protect your radiators from damage due to trail side objects and roost bullets. They offer protection not just from frontal assaults but also from those tricky side attacks. Made from high-grade aluminum alloy for light weight and strength, these guards have an improved air-flow design that eliminates any overheating problem. A solid mounting to the frame make these stronger than most guards that just mount to the radiators themselves.
Devol Racing makes a super product that will keep you on the trail for a long time.
Made of military aircraft grade 3/16" cast acrylic, this guard will protect your lens from roost, rocks and branches. Optical clarity of the acrylic ensures brightness and projection of your headlight are minimally effected while all the while protecting your headlight from impact and abrasion.
Guards are held to the headlight lens with an industrial strength hook and loop system on each corner.
Don't cut the ball ends off of your levers! These billet spacers move your hand guards outward to allow clearance for the full length of the stock levers. Designed to fit steel or aluminum bars. Includes longer stainless steel mounting bolts.
Developed for the DR650 but may work on other models with long levers. (May require additional adjustment or modification on some models.)
Not compatible with Acerbis and Emgo hand guards
Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.
Images show a set of these hand guards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. The far right image shows the need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp must go over the front brake line while on the clutch side it goes under the cable.
Note: This kit includes the handguards only. Deflectors sold separate, can be added by selecting color from drop down menu.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
- High-impact, composite injection-molded outer guard around an anodized aluminum inner guard
- Includes an indexed steel bar-end insert that mounts solidly and prevents Rally Pro handguards from slipping – even under the most demanding conditions
- Small integral spoiler incorporated into design
- X-Strong universal silver mount kit that fits 7/8” (22mm), Pro Taper 1 1/8"(28mm), Magura and Twin Wall aluminum handlebars included.
Some models with adjustable windscreens may need the windscreen rotated forward, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.
These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.
Works with 7/8" or 1-1/8" bars.
X-Factor guards may require you to cut your lever ends down, or use short levers.
The X-Factory Handguards from Acerbis feature a steel bar wrapped with an injection molded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering insurmountable protection from roost, debris, and extreme conditions.
A universal mount kit is included that allows for mounting on either 7/8" or 1 1/8" handlebars.
Will not fit XT250 with stock handlebars (oversize bars ok). Recommend Acerbis Rally Pro X-Strong to clear master cylinder.
- Designed to minimize handlebar vibration for Barkbuster Handguards that can’t accomodate OEM handlebar weights.
- Sleek aerodynamic look.
- Forged Steel with powder coat finish.
- Fit in conjunction with most Barkbusters backbones (except EGO).
- Fits externally to the VPS backbone.
- Available in black.
- Sold as a pair
Weight:
360 grams/pair or
180 grams/each
Fitment Notes: If you have a hardware kit listed below see special fitting notes as additional parts may be required
BHG-010 Requires two additional M6x40mm countersunk bolts
BHG-032 R1200GS/A requires two additional M8x55mm countersunk bolts
BHG-045 G650GS requires two additional M6x65mm countersunk bolts
BHG-050 Will not fit
BHG-051 Requires two additional M6x50mm countersunk bolts
BHG-059 Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit
BHG-075 Will not fit
BHG-079 Will not fit
Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Tough and weather shielding Storm handguards
- Aluminum backbones are compatible with all Barkbusters deflector guards
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right Storm plastic handguard deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Includes VPS left and right plastic deflectors
- Easy installation
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right VPS plastic deflectors
- VPS deflector fastening hardware
- Left and right adjustable position wind extension deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.
Select your desired color.
Must add the corresponding size mounts to fit your handlebar.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
Please Note: These handguards do not fit the Yamaha T7
You can keep your Cycra handguards even if you upgrade your handlebars to a different width.
Replacement mounts that keep your Cycra handguards fresh and tight.
CNC-machined from billet aluminum for the best fit and strength.
Please Note: These handguards do not fit the Yamaha T7
FUZION guard feature the ultimate in hand protection with a unique design and flexible yet durable material.
The expanded coverage area sweeps back toward your hand significantly increasing coverage making it perfect for cold, muddy or wet conditions.
The FUZION features a unique two position mount and is constructed of molded light-weight closed-cell AEPE foam, which is crush-proof, water proof and extremely durable.
The FUZION will work great for road of offroad riding, where wind deflection is important, and or bouncing off trees is a common occurrence.
Kit includes mounts. Optional replacement mounts available.
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.
Features:
- Fits most motorcycle handlebars
- Maximum cold weather protection
- Compatable with or without Barkbusters backbones
- Lined with waterproof membrane
- Windproof
- Full wrap design
- Allows full access of controls
- Does not block view of handlebar thumb controls
- Simple to install and remove
Whats in the box:
- Two BBZ cold weather handguards
- Mounting hardware
- Instructions
The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.
Features
- High strength and water resistant 1680d Ballistic Nylon construction
- Universal easy on/off Velcro snap strap attachment system
- Reflective Front Strip for High Visibility
- ¾ Open design provides full coverage of the hand while not impeding controls
- Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
Droppin’ into the weather? Combine Bushwackers Hand Guards with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls. Essential gear for motorcycles, snow bikes and snowmobiles.
- Cold/wet weather comfort
- Brush, mud and trail protection
- Strap on/off in seconds
- Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors
- Tough stretch polyurethane strap (can be used separately)
- Custom wind foil shapes
- No stitching or pieces to fail
- When not using Bushwackers Hand Guards, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others!
- Made in USA
REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.
Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic
Dimensions (flat): 13.5″ (length from end closest to bar clamp to end closest to bar end) x 16″ (widest part at end of bars) x 6″ (narrowest part nearest center of bar)
It may not surprise you that they are covered with HippoSkin™, their waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed cell foam insulation—both are designed to keep inclement weather away from your hands.
Sold in pairs.
Hand/brush guards are required for proper fitment and for safety reasons.
Hippo Hands go on and off in seconds and never require tools or hardware.
The Backcountry is 9" deep.
If you like to stand and ride, this is the model for you! But… these hand covers also fit to just about any bike. They are also a great option for cruisers with hand guards or lever guards.
They feature a durable, quilted interior and flexible, neoprene cuff which ensures a great fit on so many bikes. The Backcountry is their smallest, most easily adaptable hand cover.
The Backcountry features a front reflective panel for higher visibility in low light situations.
Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.
The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.
Minor installation marks, does not affect fitment or performance. Comes in original packaging with all hardware. Sold as is.
Available in White. Must add the corresponding size mounts to fit your handlebar.
Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.
Please Note: These handguards do not fit the Yamaha T7
Controls
Black in color
Upgrade your bike with a tapered 1-1/8" bar. Constructed of Aircraft grade 7065 T-6 aluminum that tapers to a standard 7/8" to accept stock controls.
- Lighter and stronger than regular bars
- No-crossbrace allows flex to reduce shock and rider fatigue
- Etched alignment marks for fast and accurate positioning
- Flex Series pad included
Comfortable Oversize (or Fat Bar) Handlebars.
- Black in color.
- Constructed of high-quality 7065-T6 aluminum
- Lighter and stronger than regular bars
- No-crossbrace allows flex to reduce shock and rider fatigue
- Oversize 1-1/8" diameter base reduces to 7/8" to allow standard-size controls/grips
- Etched alignment marks for fast and accurate positioning
- Flex Series pad included
- Works with stock controls and cables.
For bikes with factory 7/8" handlebars these will require the use of a 7/8 to 1-1/8 adapter (sold separate).
ProTaper's ADV handlebars give you a bar taller than most with extra space on the control portion of the bar. These bars provide an additional 20mm of space next to where your levers and throttle are located for your GPS, phone cradle, auxiliary switches, etc . They come in Adventure (which is taller than stock) and Adventure High (which is even taller).
These are oversize bars, which means they are are 1 1/8", not the smaller 7/8" diameter. Therefore some bikes will require a adapter and there are several available to select from.
Using the same manufacturing techniques and materials as ProTaper’s industry-changing 1⅛" motocross handlebar, the EVO Adventure is specifically designed to provide adventure/touring riders with the increased comfort and control they need. With over 8" of straight section in the control areas, mounting vital components is made easier than ever. With its premium 7000 series aluminum alloy construction and computer-profiled four millimeter-thick wall design, the EVO Adventure Handlebar is up to 25% lighter and 45% stronger than competing handlebars.
- 1⅛" tubing at the clamping area
- Exclusive 4 mm-thick 7000 series aluminum alloy for superior tensile and yield strengths
- Optimum balance between fatigue life, impact strength, and impact-absorbing flex
- High-tech shot peened, stress-relieved, and anodized finish for unmatched durability
- Independent lab tests show that the EVO Handlebar leads the market in fatigue life
- Epoxy inner coating resists corrosion
- Chemically applied cut lines and alignment grid are scratch- and peel-resistant
- Plastic bar end plugs keep the elements out and provide a stronger base for grip ends
- Weighs only 1.55-1.7 lbs. (720-780 grams), depending on bend
- 4.75" wide,
- Raises handlebars 2 inches and allows fore/aft position adjustment
- Provides dual pivot points for optimal bar positioning
- One piece design is made from solid aluminum for superior strength
- Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
Requires 7/8" factory bar clamps on bike
These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components.
These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.
Anti-Vibration Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (in these cases we recommend using standard pivoting risers).
This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.
Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.
Reduces vibration and cushions impact. Inner core compound perfects the bonding interface with bars. Anti-Rip Tip™ uses denser compound to increase life of grip. Designed to self-clean and shed mud away from outer surface. Tacky gel-like surface compound is perfect for offroad and MX.
These heated grips from Koso have been tested by us and we can say they will keep your hands warm and give you the grip you need in off road conditions, thanks to the full diamond grip design.
- Clamp-on grips do not need adhesive
- External temperature controller with 5 heat levels
- For use with twist throttle; includes interchangeable throttle cams
- Requires 35W and draws 2.5 amps per pair; low voltage shut off
The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.
Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.
The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.
This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.
Specifications:
- Integrated thumb switch designed for easy installation and control.
- “Plug & Play” wiring connections to shorten the installation time.
- Wide temperature settings for various weather conditions.
- Low Battery Warning protection to ensure the motorcycle has enough power to start.
- 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
- Ergonomically designed
- Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
- Full diamond pattern for an unparalleled feel in both wet and dry conditions
- Inner diameter optimized to keep grips secure in any conditions
- 115mm overall length; fit 7/8" bars and throttle sleeves
Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.
The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.
Ease the pressure on your wrist during those long highway drones out to where the fun begins. ProCycle has developed this kit that includes a Vista-Cruise throttle lock, a specially modified alloy throttle tube and an anchor plate that attaches to your throttle housing. Just flip the thumb lever down to apply enough friction to hold the throttle in place. Use the supplied longer screw to attach the anchor plate to your lower throttle housing bolt hole. Also included is a tension adjustment tool that you can keep on your key ring. Keep the applied tension lightly adjusted so it's easy to roll the throttle off.
Fits bikes with dual cable throttle housings.
Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.
To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.
These tips are for the Warp 9 Shift Levers only. These are held to the cast Warp 9 lever with a pin and e-clip making them easy to change out. Includes new pin and e-clip in case you lose yours.
You can also order just a new pin hardware kit which comes with new pin and clip.
The Warp 9 shift lever is black anodized and the Warp 9 logo is laser etched into the finish. The black anodized knurled aluminum tip is folding and returns via a stainless-steel return spring. Includes the pinch bolt as well.
The tip is replaceable in the event of damage.
Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.
- Aluminum extension with Japanese 10mm x 1.25 male and female threads
- Works with standard Ball Stud Base to offer clearance in some applications
- Torque spec: 5 Nm
- Sold in pairs
One folding mirror. Includes handlebar mount. Can be used on left or right side.
Sold individually.
Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.
Sold individually.
Enduro Mirror 4"
Ideal for dualsport use, where you want a low profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.
Mirror mounts to any 10mm perch.
Kit Includes:
- 1 Enduro Round Mirror
- 1 3" Arm
- 1 Ball Stud
All Yamaha's will need a mirror adapter if you have the stock perch.
This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.
Sold individually. If a set is needed, order two.
All Yamaha's will need a mirror adapter if you have the stock perch.
PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.
The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.
Sold individually. If you need a set, please order 2.
All Yamaha's will need a mirror adapter if you have the stock perch.
Keep your cables lubed up and working freely, with Motion Pro's Cable Luber. This tool is used to inject lubricant into any cable housing. Clamps over housing and cable allowing an aerosol can with nozzle to be connected. Once the lubrication solution runs out the far end, the cable is lubricated.
Competition levers by Moose Racing incorporate a cast aluminum lever with silicone grip inserts and anti-friction bronze bushings
- Levers are approximately 1" shorter than stock
- Sold as a set
These levers will only fit the DIRT ONLY model! If you have a license plate, DO NOT ORDER!
Electrical
This is an adhesive-backed foam kit, for the installation of small batteries into larger battery tray areas. Keep in mind that all Antigravity Small Case Batteries DO come with adhesive-backed foam in the box. This kit is for when you need extra foam or are doing installation in another vehicle.
Features
- Hi Density adhesive backed foam
- Help reduce vibration
- Easily cuts with scissors or razor knife
- 3 pieces of 6″ x 3″ x 0.5″ adhesive-backed foam
This is the Restart-Remote for Antigravity RE-START (RS) Powersport Batteries with jump-starting built-in. You no longer need to access the battery to press its Re-Start button in the event you over-discharged the battery. Simply plug this accessory into your Battery’s Charging Cable to remotely awaken the RE-START Battery! No need to remove the seat or a fairing to get to the Battery.
- Compatible with Antigravity RE-START Powersport Batteries
- Plugs into SAE Tip of your existing battery charging cable
- Comes with protective zipper case
- Remote requires 9v battery (not included)
- Not compatible with Automotive Batteries
Antigravity Batteries introduce the ground-breaking "RE-START (RS)" line of batteries. These are the first batteries with built-in jump starting! They intelligently monitor their status, and just before going completely dead, puts itself to sleep with just enough energy to get your vehicle started again. Simply press the RE-START button located on the battery, then start your bike and ride away!
These are an extremely lightweight (2.3 lbs.) and high-powered Lithium-Ion replacement battery for motorcycles. These batteries offer the first Battery Management System (BMS) found on a powersport battery and includes low-voltage cut-off, over discharge, over-charge, and thermal protections with real time lithium-ion cell balancing. Highly recommend using a lithium charger to maintain the life of the battery.
3 Year warranty
Product Size is just 5.9"L x 3.5"W x 3.74"H. If you need spacers, select the optional Foam Kit to pad the battery in the battery box.
Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals, it is non-explosive and non-combustible.
The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.
- Capable of holding a charge for up to one year without maintenance
- Two to four times the life of lead-acid batteries
- Carbon Fiber Composite case
- Stronger cranking for better starts
- Environmentally friendly, just discharge and dispose
- Ultra light and compact
LFX09 measures 4.5" x 3.5" x 2.25", weighs 1 lb 4 oz and is rated at 135 cranking amps.
LFX14 measures 4.5" x 3.5" x 2.25", weighs 1 lb 10 oz and is rated at 210 cranking amps.
Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box.
Voyager is the original Trail Tech off-road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.
Trail Tech provides a one year warranty and unlimited free phone and email support.
- GPS enabled, active compass, elevation readings, distance and the ability to record ride data to SD card
- Speedometer and tachometer readings in real time, shows current and total ride time and battery voltage
- The 400x240 WQVGA LCD map screen is monochrome, displaying maps in black and white.
- Plan routes on the web, then import to Voyager as gray routes ready to ride.
- As a new track is recording, a black line appears indicating where you have been.
- Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.
- At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.
- 12V DC power required, make sure your vehicle has a battery.
Voyager Pro, The Connected Rider’s GPS. Trail Tech offers a variety of model specific and universal kits for complete vehicle integration. All kits include mounting hardware, tach sensor, and power connection. Temperature and wheel sensors vary by kit, see kit contents for details. Adventure Begins Here!
Trail Tech provides a one year warranty and unlimited free phone and email support.
- Trail Tech Voyager Pro, the Connected Rider’s GPS. A premium off-road GPS with 4 inch color touchscreen anti-glare display, sealed and rated IP67 for anti dust/water intrusion
- The map screen is enabled with base maps, topography lines, hill shading, and some trails. Record or load GPX trails and riding areas, and transfer to a PC using the MicroSD card. Voyager Pro comes loaded with North American maps, but other map regions can be downloaded for free.
- Amongst the major features is Buddy Tracking. Buddy Tracking uses localized radio signals and can support up to 20 riders in a single group. View members of your ride group on the map screen in real time, increase your following distances, and use the buddy beacon to summon your buddies. Cell reception is not required.
- Buddy tracking displays the current location of up to 20 members of your ride group on the map screen
- Voyager Pro is Bluetooth enabled for intercom, phone and media controls. Play songs from your phone or MicroSD card using a Bluetooth headset, speaker, or intercom. Two phones and two headsets can be connected at the same time.
- The 4 inch glove friendly color touchscreen TFT display is visible in all conditions, including direct sunlight. Sealed and rated IP67 for anti-dust and water intrusion, it is built to withstand the harshest elements that come with extreme riding conditions. The mounting dock hard mounts to the dashboard, can be locked, and allows for quick removal of Voyager Pro from the machine. The dock utilizes the AMPs hole pattern, and is compatible with the full line of RAM brand mounts or Trail Tech mounting hardware.
- Voyager Pro integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride data such as engine temperature, RPM, battery voltage, speed/distance and more.
- At 5.6 x 3.5 inches, Voyager Pro still fits on dirt bike dashboards, but is big enough to use on adventure bikes and UTVs. Voyager Pro’s mapping abilities and buddy tracking make it the premium choice for off-road riders.
Optimate 1 Global Charger-Maintainer
This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid (STD, AGM, GEL) and 12.8V/13.2V Lithium (LFP) batteries without overcharging. Ideal for vehicles that are seldom or seasonally used, or kept in storage. Global Three-step charging program ensures effective charging of the battery and is safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or if battery is disconnected. Dust proof case with wall mounts and 6ft AC supply lead and 6 ft charge lead ending in SAE connector. Weatherproof battery lead & OptiMate battery clip set included.
Charges and maintains all 12 volt lead acid, gel and lithium iron phosphate (LiFePO4)/lithium ion polymer powersport batteries
Features:
- CONSTANT CURRENT CHARGE - If the battery voltage is over 10 volts, the charger will deliver a 2 amp charge until the battery reaches 14.2 volts.
- MAINTENANCE CHARGE - When the battery reaches 14.2 volts, the charger will automatically convert to maintenance mode. The charger will revert to charge mode when the voltage drops below a specified voltage.
- LOW VOLTAGE RECOVERY - If battery voltage is below 8 volts, the charger will apply a .2 amp charge to recover the battery, once the battery reaches 8 volts, the charger will apply a .5 amp charge, at 10 volts a full 2 amp charge is applied until the battery is fully charged.
- AUTOMATIC VERIFICATION STAGE - Charger automatically stops charging if the battery does not reach at least 10 volts after 2 hours of charging.
- SAFETY - Power is not passed thru the charging leads unless they are connected to a battery.
- LED indicator light shows charging status.
- Includes heavy duty clamps and fused ring terminal SAE adapter.
The Battery Tender Junior Selectable is a trickle charger with a brain. It will keep your Lead Acid, AGM or Lithium battery fully charged so that it is ready to go when you are. It's fully automatic, compact, and lightweight.
This smart charger has battery chemistry selection and will automatically sense and select the battery type, then complete a 4-step charging program, (Initialization, Bulk Charge, Absorption Mode, Float Mode) with a max output of 800mA. It will automatically switch to float/maintenance voltage after fully charging the battery. If the battery voltage drops too low, full charging output resumes. It also has a two color LED that indicates state of charge.
Reverse hookup is mitigated with reverse polarity protection.
Includes a 12 foot output cord, a 5 year warranty and the fact that it meets CA and OR appliance energy efficiency standards for battery charging systems make this a great little unit.
You can charge your Shorai battery with a regular battery charger but, if you want the very best for it this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term maintenance storage.
Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.
For Shorai Lithium Iron batteries only
A portable device that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices via USB cable.
- XP-1 is 6" x 2 7/8" x1" 14oz.
- XP-3 is 5" x 2 7/8" x 1" 12oz.
- Holds a charge for up to 1 year.
GET JumpStarter Mini, the second-generation, multifunctional jump starter. Now lighter and smaller, it's ready to help you restart any motorcycle or scooter when the battery is low. You can also use the powerful built-in LED flashlight or charge your use it as a power bank to charge your electronic devices. JumpStarter Mini comes together with a hard, water-resistant case perfect for carrying it anywhere and protecting it on your journeys.
- Light and compact multifunctional mini starter
- Allows restart of motorcycles and scooters when they are out of battery
- Can also be used as a Power Bank for electric devices thanks to the USB output port
- USB 5V2.4A output allows connection to tablets, smartphones, MP3 etc.
- Has built-in LED flashlight
- Easy to use; provides special protection against overvoltage and inversion of power supply polarity
- Start current: 200A, peak current: 400A, operating temperature range of -20°C to 60°C
- Includes JumpStarter, Smart Cable, 3-in1 USB cable and user instructions
- Measures 155 mm x 79 mm x 16 mm
If you are looking to swap out your stock CDI box, the Big Gun Rev Box is an affordable alternative to highly-priced OEM replacement boxes. It increases the overall RPM limit over the stock box and advances the timing curve and is a direct plug-in replacement.
You must cut the green wire on the 8-prong plug going into CDI box.