Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.

Dualsport Kits

Model

Choose mechanical or hydraulic brake switches for your dual-sport conversion

10x1.25 thread. Low profile pressure switch for those applications with limited space above the brake banjo bolt. Kit includes a special replacement banjo bolt. Choose 10x1.25 thread pitch for most Japanese models. Choose 10x1.00 thread pitch for European bikes with Brembo brakes or Japanese bikes with Tokiko brakes.

Select Switch type
$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Light / Taillight, CRF-X LED

CRF250X '04 - '22 CRF450X '05 - '22

This LED taillight replaces the factory taillight in Honda CRF450X and CRF250X rear fenders. Features a taillight and a brake light for a clean looking dual sport conversion. Wiring instructions included.

$19.95

Taillight, brake light, & license plate holder (no plate light). Attaches to the underside of MX style rear fenders. Small and good looking!

$34.95

Taillight, brake light, & license plate light. Attaches to the top side of enduro style (XR, KDX, etc) rear fenders. Dimensions: 2 3/4" x 4 3/4" x 2 1/2" tall. Wiring instructions included.

$29.95

Taillight, brakelight, turnsignals, license plate light & license plate mount. Taillight is DOT approved, turn signals are not. Attaches to the underside of MX Style rear fenders. Turnsignals are embedded in the taillight housing. Wiring instructions included.
*Flushmount signals may require resistors to flash correctly

$89.95

Taillight & brake light. Attaches to the top side of enduro style (XR, KDX, etc) rear fenders. Dimensions: 2 3/8" x 4 3/4" x 1 3/4" tall. This light is a popular replacement for the gigantic stock XR650L taillight. Functions as taillight and brake light. Fits perfectly into the taillight pocket on the XR650L. Please note that this no longer has a window for a license plate light.

$14.95

Operates turn signals, horn, headlight high/low/running/off, kill button. Blue LED high beam indicator. Includes wire pigtail with male & female 9-pin plug connectors. 1.75 inches wide. Wiring key included.

$89.95

Only 1 3/16" wide. Operates turn signals, horn, headlight high/low/off. Blue LED high beam indicator. Horn button can be used as a kill button instead. Includes 20" wire pigtail. Wiring key included.

$49.95
  • Nylon surrounding, removable polypropylene number plate, polycarbonate reflector, cast aluminum headlight body, clear polycarbonate lens cover and tempered glass lens
  • Spotlight uses 55W halogen bulb; floodlight uses 55W halogen and 5W incandescent bulbs
  • DOT and SAE compliant
$149.95

Has both high and low beams. Attaches to the upper fork tubes with rubber straps. DOT and CE approved.

Choose Color
$89.95
  • Features an innovative design; made of polypropylene
  • 10 bright white LED bulbs ensure visibility at night and high illumination while using low power consumption
  • LEDs can be used as turn signals and will not heat up after prolonged use
  • 12V 35/35W H4 bulb with LEDs; total wattage is 50
  • Universal fitment with anti-vibration rubber straps
  • Position of mounting points allow ample room for brake line/cable
  • Universal mounting strap included
  • DOT-ECE-SAE-TÜV compliant
Choose Color
$149.95

Headlight is DOT approved. Has both high and low beams. Attaches to the upper fork tubes with rubber straps. Turn signals are embedded in the headlight housing.

Thumbnail

 Integrated turn signals may require resistors to flash correctly.

Select Product
Add Resistor Kit
$89.95

Headlight high/low/off. Kill button can also be re-purposed to operate a horn.

$27.95

Small 2 3/4" diameter motorcycle horn. Works on 12v DC. Sound will be diminished when running on AC.

$9.95

Installs on any bike. Key operated power & kill switch. Turns on power (Lights, etc) when key is turned to 'ON'. Disables ignition system and turns off power when key is turned to 'OFF'. Two separate pairs of wires for kill switch and bike power. Includes stainless steel mounting bracket perfect for handlebar clamp.

$36.95

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

$29.95

License plate bolt with bright white LED light. The simple way to light up your plate.

Choose Qty
$12.95

License plate light with 3 LEDs. Very compact and easy to mount. Meets plate illumination requirements with super white light.

This is for the LED license plate light ONLY.

$17.95

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4"

Ideal for dualsport use, where you want a low profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures.

Thumbnail

Sold individually.

Choose Style
$50.95

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.

Sold individually. If a set is needed, order two.

Thumbnail

 Out of stock - Projected ETA 7/30/2021

$22.95

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

$18.95

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

$8.95

PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.

Thumbnail

Sold individually. If you need a set, please order 2.

Choose Mirror Shape
$47.95

Just two inches in diameter, this is the smallest mirror available. Perfect for bikes meeting legal requirements for street legal rules. Simply zip-tie the mirror to your handlebars out of the way of brush and protected from crashes.

Thumbnail

Sold individually.

$24.95

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side and includes handlebar mount.

$29.95

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

$49.95
  • Mini Speedometer is only 2 inches diameter.
  • Works with Japanese speedometer or odometer cables.
  • Mounts to handlebar bolt or use the bar clamp supplied.
  • Illuminated dial for night riding.
  • Smaller, lighter and more accurate than the stock unit.
$49.95

You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.

The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.

Thumbnail

  Not for any DRZ400

$29.95

These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long.

  • Sold in pairs
  • Requires LED flasher unit
  • Bikes with a single dash indicator require a diode kit

 

Add LED Flasher
Add Diode Kit
Add Turn Signal Minder
$29.95

These signals have short rubberized flexible stems and bright mini halogen bulbs.

Choose Pack
Add Replacement Bulbs
$29.95