Featured Products

Back to Top
New! 072018

Antigravity Battery-RS Series


Antigravity Battery

Antigravity Batteries introduce the ground-breaking "RE-START (RS)" line of batteries. These are the first batteries with built-in jump starting! They intelligently monitor their status, and just before going completely dead, puts itself to sleep with just enough energy to get your vehicle started again. Simply press the RE-START button located on the battery, then start your bike and ride away! Click on the 'Go to product listing' button to order yours.

New! 051817

Moto Caddy Document Holder


Moto Caddy Document Holder

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go.

ProCycle Tool Tube


Our new Tool Tube mounts in place of the little stock tool carrier. The tube is made from 3 1/2" O.D. ABS pipe. It's held by 2 strong powdercoated steel straps. Both ends are sealed with waterproof expanding plugs. This is the ideal way to carry those items you always want to have with you on every ride. Tube is approx 13" long. Long enough to carry your Tire Iron Wrenches. If security is a concern we have locking end caps for your Tool Tube.

Clutch Kits


There are three ways to order this kit: 1 - Just the Clutch Factory Friction Plates. 2 - Clutch Factory Friction Plates and Vesrah H-D Springs. 3 - The whole kit and caboodle: Clutch Factory Plates, Vesrah H-D Springs and OEM stock steel plates.

Engine

Back to Top

$34.95

Hi-Flo Oil Filter Value 5-Pack

XT225 all

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

Select Plug


Updated! 032718

Spark Plug

XT225 All
Spark Plug
Spark Plug
E3 Spark Plug

Keep your motor running right with a fresh plug. The standard NGK D8EA is a good plug and will work for a long time.

NGK Iridium plugs are made with higher quality materials and will last longer than standard plugs, meaning you won't have to replace them as often.

The E3 plugs have an almost circular electrode supported on three sides that creates a flame more toward the piston and the bulk of the air/fuel mixture giving it faster flame growth and a larger flame kernel providing better throttle response. The multiple sharp edges to the circular sharp edge of the center electrode prevent the 'arc welding' type of material depletion of other electrode plugs giving this plug an extremely long life.


$14.95

Oil Change O-Ring Kit

XT225 All

Here are the O-Rings you need when you perform an oil change. The largest one and the smallest one go inside the oil filter housing cover. The second largest one goes on your oil drain plug. The second smallest one goes on your oil fill plug. Replacing these O-Rings regularly will help keep your engine from seeping oil.


$14.95

Valve Cover O-Ring Kit

XT225 All

Time to adjust your valves? Here are the O-Rings that fit in your Valve Covers on your T-Dub. Keep the oil inside your motor and grime out! This kit includes both O-Rings. Click on these links for feeler gauges and a special wrench to aid in adjusting your valves.


$6.95

Exhaust Gasket

XT225 All

Reduce exhaust leaks with this new OEM exhaust gasket. This gasket goes between the header pipe and the cylinder head.

Select Kit


Clutch Factory Kits

XT225 All
  • Friction plates by Factory
  • Genuine Yamaha drive plates
  • Vesrah HD springs

$10.95

Clutch Cover Gasket

XT225 All (Made in USA)

Gasket for the engine case cover over the clutch. Doing any clutch work, you probably want to replace this gasket so you don't have any leaks when you are all done with the project.


$12.95

Ignition Cover Gasket

XT225 All

Fresh gasket for the ignition side cover.


$7.95

Top-Dead Center O-Ring Kit

XT225 All

Adjusting your valves or setting your cam chain tension? Here are the O-Rings that fit in the TDC sight plug and the crankshaft nut access plug.


$12.95

Feeler Gauge Kit

XT225 All

A set of feeler gauges so you can adjust the valves on your little Yamaha. Yamaha says that when the bike is cold, the Intake should be between .002" and .004" and the Exhaust should be between .006" and .007".

This set includes one gauge with a .004" on one end and a .005" on the other for your intake side and another with a .006" and .008" for the exhaust side.

$17.95

Valve Adjustment Wrench Set


  • Heat treated and chrome plated for durability
  • Include 10mm wrench with 3mm square adjuster
  • Fit motorcycles and ATVs with screw-type adjusters

    Included Items:
    (1) 10mm chrome steel socket wrench
    (1) 3mm square tappet adjuster

This part is out of stock until end of October! Sorry for the inconvenience. If you order now, we will ship your tool the moment it arrives.

$10.95

Valve Adjustment Tool

(Made in USA)

Use this tool to turn the 'square top' tappet screws. It makes valve adjustments much easier.


$13.95

Valve Adjustment Wrench

XT225 All

A 'wrench style' tool to turn the 'square top' tappet screws. The wrench does great job of holding the adjuster screw still while tightening the locknut. Slim and flat, this tool is easy to carry in a tool pack.


$15.95

Muffler Gasket

XT225 All

Reduce exhaust leaks with this new OEM muffler gasket. This gasket goes between the rear tail/muffler pipe and the header pipe.


$10.95

Vesrah HD Clutch Springs

XT225 All

Vesrah Heavy-Duty clutch springs for the mighty XT! Need new plates too, click here to see our clutch packages.


$34.95

Top End Gasket Set

XT225 All (Made in USA)

Top End Gasket Set is designed for a piston replacement job and includes:

  • Head Gasket
  • Base Gasket
  • Intake Gasket
  • Exhaust Gasket

$53.95

Complete Gasket Set

XT225 All (Made in USA)

Complete Gasket Set includes all the gaskets necessary to rebuild the entire engine and transmission, including valve seals.


$76.95

Complete Gasket Set with Oil Seals

XT225 All (Made in USA)

This gasket set is the same as the Complete Gasket Set above but includes all the necessary oil seals as well.

Fuel Systems

Back to Top

$39.95

ProCycle Jet Kit

XT225 All

Tune your stock carburetor for better power and response, easier starting and quicker warm up. Mikuni main and pilot jets.

  • Main Jets: 127.5, 130, 132.5 &135
  • Pilot Jets: 42.5 & 45
  • 5 Shim washers for raising the needle

info

Choose Quantity:

5/16" Fuel Filter


This filter is meant for 5/16" fuel lines. Only 1/2" thick once the fuel lines are in place, it is small enough to fit just about anywhere.

90 Degree Bend

Straight


Small Fuel Filters-90 Degree or Straight

XT225 All
 

The small size and right angle hose barbs make it easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1 5/8" long.

Now you can order in convenient three-packs. Change your fuel filter before you are stranded with a plugged one.

Back in STOCK! Straight Fuel Filters are available again! Order yours today!

Need some clamps to secure your line and filter? Click here for the proper sized clamps.

$14.95

Uni Air Filter

XT225 All

A quality foam Air Filter to replace the stock one. Uses the same guide and frame as the stock unit. It requires foam filter oil to properly trap dirt particles. Click here to check out the Evolution Air Filter Oil kit from No Toil.

$12.95

No Toil Air Filter


No Toil air filter to replace the stock unit. Fits the stock airbox using the standard guide and frame. It requires foam filter oil to properly trap dirt particles. Click here to check out the Evolution Air Filter Oil kit from No Toil.

Choose Kit:

Evolution Air Filter Oil


This advanced filter oil kit by No Toil is alcohol free, completely biodegradable and compatible with all foam filters.

  • Both kits include air filter cleaner and oil
  • Air filter rim grease improves the seal around the edges of the filter
  • Offers superior protection
  • Waterproof yet easy to clean

$74.95

K&N Air Filter

XT225 All
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Designed to fit inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike

$14.95

K&N Filter Care Kit

For K&N filters only

A six step maintenance system designed to recharge any K&N air filter

  • Completely restores airflow efficiency
  • Kit includes filter oil, and filter cleaner

$6.95

New! 010518

Mikuni Pocket Tuner


Mikuni Pocket Tuner

A handy pocket size slide calculator from Mikuni to help you calculate jetting changes due to temperature and elevation changes. Will work for single and multiple cylinder machines whether 2 or 4 stroke. Also includes a guide for determining rich or lean conditions.

Select Size

$39.95

Carb Repair Kit


Complete kit to rebuild OEM carburetors.


$17.95

Choke Knob

XT225 All

Replace your choke cable with this much simpler knob mounted directly on the carburetor.


$32.95

Remote Choke

XT225 All

Hate the handlebar mounted choke lever? Tough to reach the choke knob with the Clarke tank?

We now have a cable operated choke knob that mounts to the left side engine case.

Select Line Size/Color



Premium Fuel Line

Sold in 30" lengths

30" of new fuel line in the size and color you desire. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, direct sunlight, hardening and cracking.

Click here for a fuel filter for your 5/16" line or click here for filters for your 1/4" line.

You can also click here to order a set of 8 fuel line clamps to secure your line to your inlets and filters. Sized to fit your particular line.

$5.95

Fuel Line Clamps


Ordering new fuel line? How about a set of zinc plated clamps to go with that new line. These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

$7.95

5/16" to 1/4" Fuel Line Reducer

(Made in USA)
5/16" to 1/4" Fuel Line Reducer

Hose reducer to go from 5/16" line down to 1/4" line. Could be used to go up from same sizes should you need to also. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provides a secure fit.

Choose Quantity:

5/16" Fuel Filter


This filter is meant for 5/16" fuel lines. Only 1/2" thick once the fuel lines are in place, it is small enough to fit just about anywhere.

Need some clamps to secure your line and filter? Click here for the proper sized clamps.

90 Degree Bend

Straight


1/4" Fuel Filters - 90 Degree or Straight


The small size and right angle hose barbs make it easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Back in STOCK! Straight Fuel Filters are available again! Order yours today!

Need some clamps to secure your line and filter? Click here for the proper sized clamps.

Exhaust Systems

Back to Top




$518.95

Big Gun Evo Complete System

XT225 All (Made in USA)

This hard anodized aluminum muffler has a TIG welded reinforced bracket and comes with a 304 stainless steel head pipe. To compliment this sleek system, the stainless steel tip is powder coated red.

  • Lighter than stock exhaust
  • Massive horsepower and torque gains
  • Removable screen-type USFS approved spark arrestor
  • 1-year limited manufacturer's warranty

Tune your stock carburetor with our ProCycle Jet kit for better power and response, easier starting and quicker warm up. Mikuni main and pilot jets.





$324.95

Pro Circuit T-4


The T-4 Slip-On has an impressive design, polished aluminum canister, stainless steel mid pipe and end-cap and ultra-responsive performance. The T-4 Slip-On was developed to increase the horsepower and torque throughout the power curve. This silencer is designed to be used with OEM stock head pipes. This system comes with a removable USFS approved spark arrestor

Tune your stock carburetor with our ProCycle Jet kit for better power and response, easier starting and quicker warm up. Mikuni main and pilot jets.

Choose Color:

Cycle Performance Exhaust Wrap

(Made in USA)
Cycle Performance Exhaust Wrap

Set your bike apart with a custom exhaust look.. Withstands direct heat up to 2000°F

  • 2"x25' wrap available in black or natural
  • 4ea stainless steel tie wraps

$31.95

Universal Stainless Repack Kit


Universal Stainless Repack Kit

Re-pack your silencer with this pro-quality, three layer packing system and restore the power you have blown out.

Kit includes:

  • 60"x20"x1⁄4" glass mat.
  • 7"x20" stainless wool
  • 8"x20" stainless mesh
  • Twelve 3⁄16" rivets
Choose Length:

Muffler Packing Pillows

(Made in USA)
Muffler Packing Pillows

The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal and easy to install. Pillow can be trimmed to length to fit different mufflers. Comes with cap stuffer to fill packable end caps.





$264.95

DG Performance V2 Slip-on

XT225 All (Made in USA)

The V2 Series Slip-On muffler features an aluminum body, TIG welded components, stainless steel inlet tube and a great new look. This Lightweight Slip-On weighs approximately 5.5 lbs.

The DG Performance systems offer increased throttle response, power and torque. Standard sound level is approximately 98 db. Equipped with a US Forestry approved spark arrestor.

Tune your stock carburetor with our ProCycle Jet kit for better power and response, easier starting and quicker warm up. Mikuni main and pilot jets.

Select Model

DG Quiet Insert


The 1" Quiet Insert will shush up the sound level of the DG pipe from about 99db down to about 96db. Definitely takes the sharp edge off the bark.

$32.95

Stainless Steel Heat Shield


Stainless Steel Heat Shield

This universal heat shield provides great looks at a great price.

  • Fits all 1-1/2" - 2-1/8" Pipes
  • Measures 7-1/4" x 3"

$33.95

Pipe Armor


Pipe Armor Pipe Armor

Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.

Drivetrain

Back to Top
Select Size


$15.00

Countershaft Sprockets

XT225 All
  • Stock gearing uses a 15 tooth sprocket
  • Use a 13 tooth sprocket for REALLY low off-road gearing
  • Use a 14 tooth sprocket for off-road performance
  • A 16 tooth sprocket will give you lower RPM at highway or street speeds

$5.95

DID 428 Clip Type Master Link

Non O-ring

High quality replacement master link for the DID 428 non-oring chain

Choose Package:


Scottoiler Auto Chain Oiling System


This is a vacuum operated automatic chain oiling system to keep your driveline adequately lubricated at all times.

When properly adjusted the oil will last thousands of miles between refills. The Scottoiler kit includes one 250ml bottler of oil which is good for 10000 miles of riding.

$12.95

360° Chain Brush


This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance of the chain, the sprockets and the engine. This brush will fit any 400 or 500 series chains.

$13.95

The Grunge Brush


Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes
Select Size


$38.95

Rear Sprockets

XT225 All

Stock gearing uses a 45 tooth rear sprocket

The 50 tooth rear sprocket will give you much lower gearing for off-road use. You will need a longer chain for this rear sprocket, please order the 130 link chain below. That may need to be shortened to fit correctly.


$34.95

DID 428 130L Chain

Non O-ring

High Quality DID chain. You'll need to cut to fit your sprocket combination. Includes Clip-Type master link.

$19.95

Master Link Pliers


Master Link Pliers

Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.

$16.95

Chain Breaker Tool


Chain Breaker Tool

Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.

! Note! The head of the pivot pin you are going to remove must be ground or filed down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!

$8.95

Renthal Chain Lube

All Chains

Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.

The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.

$8.95

Motul Chain Paste

All Chains

A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes.

Suspension

Back to Top

$175.95

Cogent Dynamics DDC's

XT225 All (Made in USA)

These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. No disassembly of your forks, no drilling of damper rods. Just change the oil to 5w and install the DDCs under the springs and hit the trails.

Stiffer fork springs are required to realize the full benefits of the DDCs. .42 kg/mm springs are the springs recommended for just about anybody out there. Please call if you have any further questions.

The DDCs are not recommended for use with progressive springs.

Click here for the DDC Install/Removal Tool which makes installation that much easier.


$155.95

Race Tech Fork Cartridge Emulators

XT225 All
Race Tech cartridge emulators

Emulators make damping rod forks perform like well-tuned cartridge forks. Emulators are tunable valves that sit inside your forks on top of the damping rods and are held in place by the fork springs. Simple to install and completely tunable for all conditions and rider preferences.

$154.95

.48 kg/mm Fork Springs

XT225 All (Made in USA)

These springs are custom wound specifically for the XT225. 30% stiffer than the .36 kg/mm stock springs, these will make your front perform significantly better. Combine them with the Cogent DDC's and you will be very happy with the results. Sold as pairs.

$39.95

New! 022015

Cogent DDC Install/Removal Tool

(Made in USA)

Use this installation tool from Cogent to be sure that your DDCs are installed correctly. A strong magnet in the end holds the DDC firmly while you lower it into your fork leg. Then slide the spring over the tool until it holds the DDC down, then gently remove the tool. That simple. Never again question if it is properly seated on the damper rod.

Works equally well for removal when you need to change your fork oil. Also works great with Race Tech Emulators.

Select Spring Rate


$679.95

Cogent Dynamics 'Modoc' Shock

XT225 All (Made in USA)

The Modoc is an excellent replacement for the stock shock. With adjustable rebound damping and preload, you can tailor the performance to match your riding style.

Select the spring you want installed based on the load you plan to carry. For most riders, the 7.1 kg/mm spring will suit you perfectly. Weigh more than 250 lbs, or are loaded to the max, think about the 8.1 kg/mm spring. Please call with any questions.

Special Order allow 2-3 weeks for delivery

$40.95

Steering Head Bearings

XT225 All

Tapered roller bearings provide decreased maintenance, less wear, smoother operation and longer life. This set of high quality replacement steering stem bearings include:

  • Upper and lower tapered bearings
  • Upper and lower bearing races
  • Upper and lower seals

$49.95

Swingarm Bearing Kit

XT225 All

Complete kit to replace the bearings and seals in the XT225 swingarm pivot.

$34.95

New! 032618

Linkage Bearing Grease Tool


DRC Link Lube Injector

Makes installation of your linkage bearings much easier. Also simplifies maintenance of those bearings.

  • Linkage bearing grease tool
  • Allows placing bearing needles on bearing race while greasing linkage bearings
  • Will thoroughly apply adequate grease on your suspension linkage bearings

$29.95

Fork Seal/Dust Seal Kit

XT225 All

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.


$19.95

Fork Seal Skins

XT225 All

Helps protect vulnerable fork tube and seal from dust, dirt, and corrosive elements. These are sewn into a tube and require that you drop your fork tubes down out of the triple clamp for installation. Can still be slid up for easy cleaning.

Choose Color:

$24.95

New! 111017

Fork Boots

Sold in pairs
Fork Boots

Are your stock fork boots cracked and letting grime into your fork seals? Just want to change the color of your stock boots? Here are a set of aftermarket fork boots for your TW.

Choose black, red, royal blue, yellow, or light blue.

 

fork boot red fork boot royal blue fork boot yellow fork boot light blue

Lighting & Electrical

Back to Top
Choose Package:


Micro-Start Portable Jump Start and Power Supply


A device that you can keep in your fanny-pack, backpack or even pocket that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices.

  • XP-1 is 6" x 2 7/8" x1" 14oz.
  • XP-3 is 5" x 2 7/8" x 1" 12oz.
  • Holds a charge for up to a year.

Review by Dirt Wheels Magazine

XP-1:
  • 200 Amp- 400 Peak Amp
  • 12000 mah Capacity
  • 19V Output Port for Laptops
  • 12V Standard Output Port
  • 5V 2A USB Port
  • Detachable Mini Jumper Clamps
  • 3 power ports: 19v for lap tops, 12v standard output, and a USB 5v output for USB powered devices
  • A Universal Cable with 8 different detachable tips to fit all the different brands of Laptop charging ports (Apple, Acer, Dell, HP, Asus, and more)
  • A Universal Cable for 12v standard plug accessories such as Mobile DVD players and heated gear. (8amp max)
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-1)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-1)
  • Nylon zippered carrying case
XP-3:
  • 200 Amp- 400 Peak Amp
  • 8000mah
  • 5V 2a USB Port
  • Micro-Start XP-3 Unit
  • Detachable Mini Jumper Clamps
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-3)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-3)
  • Nylon zippered carrying case

$49.95

Digital Voltmeter and Bracket


A digital voltmeter that can be mounted almost anywhere thanks to our multi-position stainless steel bracket. This will tell you how your charging system is doing and whether or not you need to turn off the laptop and in-flight movie system for awhile. Completely waterproof and comes with connectors, wires and thorough instructions. We consider this a 'must have' device for riders who use heated riding gear, heated grips, additional lighting, GPS, etc.

Digital Voltmeter and Bracket Digital Voltmeter and Bracket
Choose Package:

LCD Digital Voltmeter-Quick Disconnect


LCD Digital Voltmeter-Quick Disconnect

Deltran quick-disconnect plug with LCD voltmeter display. Plug this into your Battery Tender, or any SAE cable, to see a LCD display of the battery voltage. Three LED lights indicate the state of charge as well. Easily unplug it whenever you need to get the charger hooked back up.

Choose Package:


12V LED Flashlight/Charging System Indicator


This great little 6-LED flashlight goes right into your SAE battery charging socket for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. All with a 40 inch cord so you can see in those out of the way places when you need to.

Don't have a cable from your battery? Well, select the package and we will include a cable that goes from your battery to a SAE type connector to plug in your light or charge your battery when at home. This is a fused circuit to protect your battery.

$59.95

Brake Light Modulator

XT225 All (Made in USA)
Brake Light Safety Pulser

Grab the attention of rear-enders! This device will pulse your brake light automatically to get their attention. There are over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device.

Features:

  • Independently programmable flash speed, flash duration, and pre-delay.
  • Works for LED or Standard Bulb Tail Lights.
  • All Solid State design.
  • Meets or exceeds OEM load rating specifications.
  • Designed for DC electrical systems (most are).
  • Over 1000 possible flash pattern combinations.
  • Simple programming setup with your brake lever.
  • Extremely compact unit size; 20mm x 20mm x 12mm.

$24.95

Stock Taillight Lens


Direct Yamaha replacement for your stock unit. Crack or break yours in a fall? This is what you need to make your baby look like new.

$18.95

New! 111517

LED Taillight/Brake Light 1157 Bulb


LED Taillight/Brake Light 1157 Bulb

A LED Taillight/Brake Light bulb uses considerably less energy than a standard filament type bulb. LED brake light will draw approximately 1 watt while a filament type draws in excess of 15 watts. This means less power draw and additional power for accessories.

$29.95

New! 050118

LED License Plate Frame

(Made in USA)
License Plate Frame w/LED Lights

This black motorcycle license plate frame includes six white full-spectrum HID type LED bulbs on a 6-inch strip for bright illumination of your license plate. The LED motorcycle license plate frame is made with a sturdy cast aluminum and powder coated in a black finish that won't easily come off or get scratched. You can see the six LED's in the upper edge of the frame in the image above.

Outside frame dimensions are 7.25 in. wide by 4.2 in. tall for a license plate that is 7.1 in. x 4.1 in. The center to center mounting hole distance is 5.7 in. All mounting hardware is included.

$109.95

SignalMinder


click to enlarge

The signalMinder unit is designed as a plug-in replacement for many Japanese bikes. This unit will automatically cancel your turn signal if you forget to shut it off.

  • Cancels signal at 10, 20 or 30 second intervals
  • Allows you to use turn signals as running lights
  • 4-way hazard option
  • Brake flash option

SM-3 unit is designed as a plug-in replacement for most Honda and some newer European bikes. signalMinder uses a computer chip to cancel the turn signals. There are three selectable time outs: 10, 20, 30 seconds.

RUNNING LIGHT OPTION: By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your bike.

Special Note! For 2009 and up Kawasaki models that have onboard computer diagnostics, or if you have Alarm system that activates turn signals, please select SN-4D harness shown below.

Using the DIP Switch #1, you can keep them off and still have the dual-channel system. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function.

BRAKE FLASH OPTION: will flash the turn signal lamps every time you apply brakes. A short 2 second flash pattern begins with quick flashes then slows down to stay on solid.

BRAKE OVERRIDE OPTION suspends the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing.

Optional Add on:

$79.95

New! 11082017

Tuff Lites Flexible LED Turn Signals

Sold in pairs
>Tuff Lites Flexible LED Turn Signals

They're back at last! The new folks at Extreme Dual Sport are now making the Tuff Lites again. The unique feature is a metal spring in the Tuff Lite stalk to allow it to bend a long way in any direction without breaking.

  • Flexible stalk, 180 degree deflection with no fatigue
  • Ultra tough housing and lens
  • All weather

LED turn signals require an LED flasher. Diode kit is required for bikes with a single turn signal indicator on the dash. More Info

Optional Add on:

$29.95

"Crash Advantage" LED Turn Signals

Sold in pairs
"Crash Advantage" LED Turn Signals

These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long!

LED turn signals require an LED flasher. Diode kit is required for bikes with a single turn signal indicator on the dash.

$29.90

Mini Turn Signals

4 Pack
Mini Turn Signals

These signals have short rubberized flexible stems and bright mini halogen bulbs.


$19.95

LED 12V Turn Signal Flasher


Works with LED type turn signals. For DC (battery) systems only.


$21.95

LED Turn Signal Resistor Kit


Allows LED type turn signals (and low wattage flush mounts) to flash using a standard flasher unit. Connectors included. One kit works with 4 signals. 


$12.95

LED Signal Diode Kit


This Diode Kit is only necessary if you have a single indicator for your turn signals. One dash light for both left and right signals (such as on the DR650).

This kit allows power to flow in just one direction from the LED signals to the indicator light regardless of which direction you are signalling.

$14.95

ThumbDogs


ThumbDogs

These simple add-ons stretch and grip to the finger of your favorite glove using Grrprr technology. Users can operate a phone or any touch screen device and never have to remove their nice warm gloves.

A special conductive material enables you to interact with capacitive touch screens quickly and easily. There are two ThumbDogs to each package so you can double digit type just like you would in the real world. You can also put one on your index finger to operate your GPS.

$34.95

Noise Isolating Earbuds/Speakers


click to enlarge

These lightweight earbuds function like any other set of earbuds, but make a better and more comfortable seal. This helps put music, phone, GPS, intercom, etc. from the built-in speakers, to where it matters most. The unique earplug design ensures that wind and engine noise is blocked and more sound from your device is channeled straight to your ear. The ComforTwist™ Foam Plugs have a Noise Reduction Rating (NRR) of 23db. The ComforTiered™ Silicone Plugs have a NRR of 26 db. Their low profile allows them to easily fit under your helmet. Total length of wire is 54", enough to reach just about anywhere you need.

This new version includes an IsoTalk™ Noise Isolating Mic with a Quickdraw™ Easy Access Control. Complete instructions for all aspects of the unit are included with each set.

If you would like just standard high-quality NoNoise Ear Plugs, click here.

Optional Add On

$124.95

New

Antigravity Battery-RS Series


Antigravity Battery
Antigravity Battery

Antigravity Batteries introduce the ground-breaking "RE-START (RS)" line of batteries. These are the first batteries with built-in jump starting! They intelligently monitor their status, and just before going completely dead, puts itself to sleep with just enough energy to get your vehicle started again. Simply press the RE-START button located on the battery, then start your bike and ride away!

These are an extremely lightweight (2.5 lbs.) and high-powered Lithium-Ion replacement battery for motorcycles. These batteries offer the first Battery Management System (BMS) found on a powersport battery and includes low-voltage cut-off, over discharge, over-charge, and thermal protections with real time lithium-ion cell balancing.

Product Size is just 8.4"L x 5"W x 2.2"H. If you need spacers, select the optional Foam Kit to pad the battery in the battery box.

FEATURES
  • LONGER LIFE: Up to twice the lifecycle of lead/acid, and other lithium batteries due to the Battery Management System.
  • HI POWER: Up to 2 times the Cranking Amps of similar sized lead/acid batteries. Better starting and higher voltage at start-up.
  • ULTRA LIGHTWEIGHT: Up to 70% lighter than equivalent lead/acid battery.
  • FOUR TERMINALS: New 4 terminal design allows easy installation in any vehicle. Fits right or left hand Negative or Positive connections.
  • LOW SELF-DISCHARGE: This battery does not self-discharge like most batteries. They can hold a charge up to a year provided there are no "Parasitic Drains" (accessories that draw power when bike is off).
  • DURABILITY: Our lithium batteries are shock and vibration resistant making them perfect for ADV riding, racing, any application that requires a durable battery.
  • MOUNTING: You can mount this battery in any orientation as there are no liquids to spill or drain out.
  • ENVIRONMENTALLY SAFER BATTERY: No acid or heavy metals such as lead, cadmium, or mercury.
  • PRODUCT WEIGHT: 2.5 lbs.
  • PRODUCT SIZE: 8.4 x 5.0 x 2.2 in.
  • CRANKING AMPS: 150
  • AMP HOURS (Pb Eq): 7
Select Battery


Shorai Power Lithium-Iron Battery

XT225 All
  • No more dead batteries. Holds charge for one year without maintenance
  • Two to four times the life of lead-acid batteries
  • Carbon Fiber Composite case
  • Faster cranking for better starts
  • Environmentally friendly, just discharge and dispose
  • Ultra light and compact - You could easily carry a spare!

LFX09 measures 4.5" x 3.5" x 2.25", weighs 1 lb 4 oz and is rated at 135 cranking amps.
LFX14 measures 4.5" x 3.5" x 2.25", weighs 1 lb 10 oz and is rated at 210 cranking amps.
For reference, the stock YTX7L-BS weighs 5.1 lbs and is rated at 100 cranking amps.

Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box.



$76.95

Shorai Charger


You can charge your Shorai battery with a regular battery charger but if you want the very best for it, this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term long term maintenance storage.

Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.

For Shorai Lithium Iron batteries only

Choose Optimate:



Optimate Battery Maintainers/Chargers


Optimate Battery Maintainers/Chargers

Optimate 1 Global Charger-Maintainer

This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid filler cap / wet cell, sealed AGM (MF) or GEL battery without overcharging. Ideal for vehicles that are seldom or seasonally used, or in storage. Global Three-step charging program ensures effective charging of the battery and is totally safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or battery disconnected. Dust proof case with wall mounts, with 6ft AC supply lead and 6 ft. charge lead ending in SAE connector. Velcro strap slot to hang the charger on handlebar. Weatherproof battery lead & OptiMate battery clip set included.

********************************

Optimate Battery Maintainers/Chargers

Optimate 2 Maintainer

OptiMate 2 senses the battery condition, recharges and then keeps the battery 100% ready. The OptiMate maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Totally safe for vehicle electronics. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. Works with standard filler caps, and sealed maintenance-free units. Includes permanent ringlet connector with weatherproof cap and battery clips. Comes with global input (100-240V).

********************************

Optimate Battery Maintainers/Chargers

Optimate 3 Optimizer

Recovers sulphated batteries and then tests after charging. The maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Diagnoses, recovers, charges, tests and optimally maintains, automatically. Comes with global input (100-240V). For batteries forgotten over the winter, OptiMate 3 will recover them from deep discharge and optimally recharge them. Batteries status can be checked at a glance. OptiMate 3 will then maintain the battery at full charge safely for months at a time and increase life by up to 400%. Works with standard AGM, and gel batteries. Do not use with Lithium batteries.

********************************

Optimate Battery Maintainers/Chargers

Optimate Lithium

OptiMate™ lithium, the first OptiMate to protect your LiFePO4 battery unlike any other charger. Will protect your investment and keep your Lithium Iron Phosphate (LiFePO4/LFP) battery performing as advertised for a very long time. With 5 Amps of charge current available, OptiMate lithium's unique multi-step ampmatic™ program recharges and balances cells within the battery quickly and efficiently. Optimate lithium's maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge. Tests and displays battery condition before charging. Voltage retention test is conducted for 30 minutes during which no charge current is delivered, and provides results indicating the battery's general state of health. The 12-hour MAINTENANCE CHARGE CYCLE consists of 30-minute float charge periods at a voltage of 13.6V followed by and alternating with a 30-minute "rest" (no charge current) periods. Includes permanent ringlet connector with weatherproof cap and a set of battery clips.

$44.95

New! 031518

Battery Tender Jr. Selectable


Battery Tender Jr Selectable

The Battery Tender® Junior Selectable is a trickle charger with a brain. It will keep your Lead Acid, AGM or Lithium battery fully charged so that it is ready to go when you are. It's fully automatic, small and lightweight-great for small spaces.

This smart charge has battery chemistry selection and will automatically select the battery type and then complete a 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode) with a max output of 12v @ 800mA. Then it will automatically switch to float/maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. It also has a solid state two color LED that indicates state of charge.

Put the clamps on the wrong terminals and reverse polarity protection takes over. No sparks - no problems. A 12 foot output cord, a 5 year warranty and the fact that it meets CA and OR appliance energy efficiency standards for battery charging systems make this a great little unit.


$64.95

3800 Lumen LED Headlight Bulb


New and improved. Brighter (3800 Lumens), better low/high beam contrast, smaller, lower Kelvin color temperature (5500K), replaceable drivers and easier to install. All of these features and the most reliable LED bulb currently available. It only draws 20 watts.

This bulb fits H4 bases only, has Cree XML2 emitters and is fan cooled for extreme conditions. Further features include vibration proof and water-resistance, even complete submersion.


$16.95

Heavy Duty 12V H4 Bulb


This is a standard H4 bulb that has an 90 watt low beam and a 100 watt high beam. This is an easy lighting upgrade that should not over tax a stock charging system.

Select Beam Type


$119.95

VisionX Solstice 10 Watt LED Light


Each 10 watt Solstice Solo produces 900 lumens. Roughly equal to a 50 watt halogen bulb. These are the brightest LED off road lamps on the market. The rugged and compact 2” x 2” square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod. Includes stainless steel mounting bracket and waterproof connection. The Elliptical pattern is wide and flat. Sold each.

Choose Kit:

Trail Tech Equinox 60mm LED Light


Trail Tech Equinox 60mm LED Light
Trail Tech Equinox 60mm LED Light

Trail Tech's 60mm LEDs are perfect for any riding adventure, no matter the conditions. Throwing out over 1,000 lumens brightness at only 10 watts, it is one of the most efficient lights on the market.

Three power modes allow performance at any circumstance, from Hi mode for lighting up the night to Low mode for daytime driving light.

The anodized billet aluminum housing is durable and promotes better heat management. Aluminum reflector with vacuum metal deposition creates the most accurate spot beam.

! This light is being discontinued. Only 1 left in Stock

Choose Mount:

RAM Light Mounts

For LED Auxiliary Lights
RAM Light Mounts

The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. We have 2 types to choose from. The Equinox mount fits Trail Tech Equinox lights or any other light with a 10mm or 3/8" mounting stud. The Solstice mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

Sold individually.

RAM Light Mounts RAM Light Mounts RAM Light Mounts
Optional Charging Cable:


$34.95

Weatherproof USB Charging System


click to enlarge

This compact, easy to mount, all weather USB Power Port is the answer for powering and charging your USB devices including cell phones, smart phones, most GPS units, MP3 players and some digital cameras.

Power port connects from battery to handlebars using included universal mount.

Select the correct charging cable for your application by clicking on "More Information".

click to enlarge click to enlarge
  • 18" power port and charging cables
  • Input Voltage: 12V ± 4.0V
  • Output Voltage: 5V ±.25V
  • Output Current: 1A Max
  • 3BR Powersports Universal Mounting System
  • Powers Garmin GPS as well as most cell phones and any other device that charges using 1A or less of USB power

Red Band USB Smart phone Quick-Charge Cables (Micro style connector)looks like standard USB data cables but have the built-in ability to signal Smart phones such as Android or Windows to charge at full rate when plugged into any "dumb" charger such as car chargers, wall adapters or 3BR Powersports TAPP series of all-weather USB power ports. Charging at full rate can reduce the charging time by as much as two hours and will easily keep up with power hungry applications such as GPS or video.

Red Band GPS Power cables (Mini style connector) enable Garmin Nuvi GPS to navigate when plugged into a generic USB power port. Garmin Nuvi uses the cable to determine which mode, navigate or data, the GPS should be operating in. Using a standard USB data cable to power a Garmin Nuvi will cause it to go into data mode for transferring maps, route/track data, pictures etc. The Garmin factory power cable is used to enable navigation mode. However, the Garmin power cable is unsatisfactory for powersports applications as it is not weatherproof, is way too long and is only supplied with a cigarette lighter-type of plug. The 3BR Powersports Red Band GPS power cable looks like a standard USB power cable with a USB Type A plug on the source end but it has internal circuitry to make it appear to the GPS as a Garmin power cable. The USB Type A plug allows powering the GPS from any generic USB port and allows use of 3BR Powersports power port cables for full all-weather protection.

Choose Package:

Optional Add On:

Panel Mount SAE Socket


OptiMATE Cable O-20
OptiMATE Cable O-20

The Optimate Cable O-20 is a SAE weatherproof bulkhead/panel mount power source. Main body fits a 1" dia. hole. With space in the dash area of the DR kind of limited, we offer an optional stainless steel bracket that will bolt to your handlebar clamp, making for a clean and easy installation. Overall length of the unit is 12" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors.

Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead for when you don't have something plugged in. Unit has a 3-year limited warranty.

Don't have a cable back to your battery? Then select the package that includes that as well.

Lower image shows the mount side with the optional Mounting Bracket installed.

Choose Package:


USB Device Charger


This mini USB device connects to a battery cable with a SAE connector just like the typical Battery Tender outlet and allows you to charge your iPad, iPod, iPhone, GPS unit, camera or Smart phone. Input is 12 Volts, output to the USB port is 2.1A maximum, perfect for your phone or low or other USB devices.

Body & Frame

Back to Top
Choose Tint:

$78.95

Dual Sport Windscreen


Dual Sport Windscreen Dual Sport Windscreen

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps. Will not fit 1 1/8" oversize handlebars. 14" tall 10" wide.

Optional Add on:

$174.95

Seat Concepts Foam & Cover Kit

XT225 All (Made in USA)

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality and comfort at an affordable price.

Click here to check out the new seat warmer.

! Seat orders ship Parcel Post (6-10 business days) within the US.  Why?

Select Top Texture


Select Side Texture


$365.95

Corbin Seat - Dualsport Riding Comfort

XT225 All (Made in USA)

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Corbin seats are built to order. Lead time on building a seat is 2-3 weeks.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides. You can view all of the available materials and colors on Corbin's Website.

! Ships Parcel Post (6-10 business days) within the US.  Why?


$79.95

Moose Seat Warmer Kit


click to enlarge

9" by 9" carbon fiber seat warmer that goes between your cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.


$69.95

Sheepskin Seat Cover


This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.


$112.95

AirHawk Seat Cushion


So you're not ready to dish out $300 for a new seat but you can't stand to sit on the stocker for more than 50 miles. The Air Hawk might be the answer.

  • Air filled Airhawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included

 

 
Select Color

$239.95

Clarke 4.1 Gallon Fuel Tank

XT225 All (Made in USA)

The new 4.1 gallon fuel tank from Clarke. Carries almost 2 more gallons than the stock tank. Available in Reflex Blue, Black, Silver, White or Natural

! Ships Parcel Post (6-10 business days) within the US.  Why?

! NOTE: Clarke tanks do not come with a vent hose or vent cap. If you do not have one, click here to order one.

  
Choose Tank Type:

$34.95

Fuel Tank Filter

Fits Acerbis and IMS tanks
Fuel Tank Filter

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carb! Created by the filter experts at Twin Air, this filter fits IMS and Acerbis gas tanks.

This unit does NOT fit the Clarke Tanks.

Select Color

$11.95

Fuel Tank Vent Cap


If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.

Not for stock fuel tanks

Select Kit:



ProCycle Tool Tube

XT225 All (Made in USA)

Our Tool Tube mounts in place of the little stock tool carrier. The tube is made from 3 1/2" O.D. ABS pipe. It's held by 2 strong powdercoated steel straps. Both ends are sealed with waterproof expanding plugs. This is the ideal way to carry those items you always want to have with you on every ride. Tube is approx 13" long. Long enough to carry your Tire Iron Wrenches.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end. Or you can order just the Locking End Cap and lock if you already have a Tool Tube.

  

$57.95

Headlight Guard

XT225 All (Made in USA)

Fabricated from mild steel tubing and expanded metal, then powdercoated black, this guard will protect the headlight from flying rocks and possible crash damage. Easy installation with all required hardware provided.


$89.95

Skid Plate

XT225 All (Made in USA)l
  • Made from strong and lightweight 4mm thick aircraft aluminum
  • Protects vital engine parts from rocks and debris
  • Custom fit to your specific bike model
  • Oil drain hole for easy access
  • All mounting hardware included
Choose Color:



$28.95

Supermoto Front Fender


Supermoto Front Fender

Universal design. Vents in the back improve airflow to motor. Smaller front reduces 'wind steer' and improves high speed stability.

! Front fender orders ship Parcel Post (6-10 business days) within the US.  Why?

Choose Color:



$22.95 - $35.95

Off-Road Front Fender


Off-Road Front Fender

Universal off-road front fender.

! Front fender orders ship Parcel Post (6-10 business days) within the US.  Why?

Wheels

Back to Top
Select Rims



Select Tires






$1199.00

asdfasdfasdfasdfasdfasdf

Supermoto Wheels

XT225 All
   

Our wheels are custom built to fit your bike. They are carefully laced and trued to provide you with a solid, high-quality wheel. We use high-quality Excel or Sun rims and Buchanan's heavy gauge stainless steel spokes and heavy-duty nipples. All bearings and seals come pre-installed. All the wheels we build allow the use of stock brakes, rotors and sprockets.

Call and ask about our tire package. Get tires with your rims and we will mount and balance them for free as well as include new tubes. When you get them all you have to do is swap over the rear sprocket, front disc and you are ready to ride.

  • New OEM hubs with bearings and seals
  • Excel 2.5"x17" front rim, clear-anodized aluminum
  • Excel 3.5"x17" rear rim, clear-anodized aluminum
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
  • Laced and trued

We'll also gladly build wheels on your own hubs. Custom wheels can be built with many other rim sizes. Call if you have any questions.

!All rims are custom drilled to order, please allow 2-3 weeks for delivery. Once ordered, custom wheels, rims or spokes cannot be cancelled or returned.


$14.95

Rear Wheel Bearing Kit

XT225 All

Moose Racing rear wheel bearing and seal kit. All bearings are sealed on both sides.


$10.95

Front Wheel Bearing Kit

XT225 All

Moose Racing front wheel bearing and seal kit. All bearings are sealed on both sides.

Select Rim & Spoke Kit

Color Upgrades


sdfasdfasdfasdfasdfasdfasdf

Rims & Spokes

XT225 All

We can supply stock size rims and spokes for your mighty XT in case your wheels self-destruct! (Hubs not included)

Rims are custom drilled and spokes are made to order so allow approximately 2 weeks to ship.

Call if you would like us to add hubs to your package. We can also do a stronger cross 3 pattern for additional strength if you like.

Want us to build them for you? Send us your hubs and add $80 per wheel to the price and we will lace and true our rims to your stock hubs.

We use high quality Excel or Sun rims and Buchanan's heavy gauge stainless steel spokes and heavy-duty nipples.

! All rims are custom drilled to order, please allow 2-3 weeks for delivery. Once ordered, custom wheels, rims or spokes cannot be cancelled or returned.

$109.95

Warp 9 Spoke Torque Wrench



A professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.

Included tip sizes: 5.1, 5.6, 5.8, 6.3, 6.7, 6.9 and Spline drive.

Tires

Back to Top
New! 022018

Check out the Tires page!


Link to Tires page

We've moved all our Tires and Tubes and to a single page to make it easier for you to find exactly what you want. Click here to go to that page and get those tires added to your order!

Tire tools and accesories are located at the bottom of the new Tires page. Click here for Tools and click here for Accessories.

Brakes

Back to Top

$58.95

New! 081115

Galfer Braided Front Brake Line


Steel braided lines have a Teflon tube as a core wrapped with a stainless steel wire braided exterior which doesn't allow the brake lines to stretch under pressure like stock rubber lines do.

The benefit is a firmer brake lever with better feel because the energy that was going into stretching the stock lines now goes straight to the brakes.

Select Year


EBC Front Disc Brake Pads

XT225 All

Premium quality EBC Front brake pads


$20.95

EBC Rear Brake Shoes

XT225 All

Premium quality EBC Rear brake shoes.

$24.95

Mini Bleeder




Combines wrench and bleeder valve into one convenient and compact tool

  • Fits most 8 mm bleeder nipples
  • Bleeds brake systems and hydraulic clutch systems
  • Internal check valve for fast easy bleeding
  • Anodized billet aluminum handle with chrome moly steel body
  • Compact size for tight spaces
  • High quality internal seal
  • Multi position handle

$7.95

Bel-Ray DOT 4 Brake Fluid


Bel-Ray's Super DOT 4 brake fluid is specially formulated to exceed all DOT 3 & DOT 4 specifications. What this means to you is exceptional resistance to vapor lock and maintaining consistent lever feel during hard brake use. This 12 ounce bottle is enough to finish just about any job.

  • Formulated for hydraulic brake systems
  • Mixes with all fluids meeting DOT 3 and DOT 4 specifications
  • Boiling point: dry 446°F, wet 311°F
  • For brake systems and hydraulic clutches, except systems using mineral base fluids

Controls

Back to Top

$19.95

Go Cruise Cruise Control


The Go Cruise cruise control goes over the throttle grip and rests on the brake lever to hold your throttle open allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

$10.95

"Crampbuster" Cruise Assist

(Made in USA)

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but rather a simple clip-on device which allows you to relax your grip while riding.

Select Size


$59.95

Powermadd 2" Handlebar Riser

XT225 All
  • 4.75" wide, requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimum bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" or 1-1/8" bars
Choose Color

$94.95

Rox Pro-Offset Elite Block Risers

(Made in USA)
Rox Pro-Offset Elite Block Risers Silver
Rox Pro-Offset Elite Block Risers Black

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.


$54.95

Billet Quick Throttle Tube

XT225 All

Opens your throttle 15% faster. No more 'double handfuls' to get it wide open. Removable end cap for bikes with hand guards.


$10.95

ProGrip 714 Rally Grips

Our Favorite Grips!

Replacing your handlebars? Time to replace those worn out grips? These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze.

Select Controller

BikeMaster Heated Grips


Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Select Cable & Year


Control Cables

XT225 All

Replace your worn or broken cables with fresh ones! Throttle, Clutch or Speedo, they are all here!

Images are not of actual parts.

  

$9.95

Cable Luber


Keep your cables lubed up and working freely. This tool is used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the far end, the cable is lubricated.

$19.95

New! 031017

Motion Pro Cable Luber V3


Motion Pro Cable Luber V3

A new type of cable luber from the tool people at Motion Pro. Designed to seal completely around the cable housing and stop all those messy leaks. Because the unit is closed and sealed before pumping the lube down the cable, your cable gets more lube! A lubed cable is a happy cable!

Keeps things clean and simple. No more lube running down your arm. Works on most cables with a 4mm to 8mm OD housing.

$20.95

Dri Slide Cable Lubricant


Goes on wet but evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, and prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.


$21.95

Moose Molded Foam Handguards



Riding in the harsh conditions of winter? Good, we are too. These foam hand guards are great. You get the extra protection in bad weather to help keep your hands warm and dry. These just about double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain at bay.

Select Lever & Year


Clutch & Brake Levers

XT225 All

Order up your new levers here! Clutch or brake from 1992 to 2007, they are here. If you keep breaking levers, you might want to think about a set of handguards to protect them in case of a fall. Click here to see those.

$29.95

Footpeg Extensions

XT225 All

Weld-on footpeg extensions to make footpegs 1/2" wider and longer. These will give you a much more stable platform when standing on the pegs. These footpeg extensions measure 1-9/16" x 3". Sold in pairs.

Select Kit



Oversize Handlebar Kit

Gun metal gray
Oversize Handlebar
Rise Insert

Upgrade your bike with Aero 1-1/8" bars. Constructed of Aircraft grade 7075 taper walled aluminum that tapers to a standard 7/8" to accept stock controls.

  • Bead blasted surface for added strength
  • Laser accurate steering
  • Dissipates shock and reduces rider fatigue
Select Bend & Color


$41.95

Fly Handlebars

XT225 All
Fly Handlebars

These handlebars are high quality at an affordable price. Several bikes here in the shop use these bars and we like them.

  • 7/8" mounting area, fits stock mounts
  • Manufactured from 6061 T-6 aircraft aluminum
  • Knurled center section and clutch end
  • Bar pad included
  • Reduces rider fatigue by absorbing impact, shock and vibration

  • OEM  W=787, H=76, R=50, S=72, B=18 deg.
  • CR High W=802, H=99, R=65, S=54, B=13 deg.
  • KX/RM W=805, H=93, R=50, S=55, B=14 deg.
  • YZ/WR W=803, H=92, R=56, S=57, B=15 deg.
Choose Size:


Doubletake Mirrors

Sold Separately
Enduro Mirror

ADV Mirror

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4" diameter

Ideal for dualsport use, where you want the absolute minimum profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter.

Choose Size:

$47.95

PSR Dualsport Mirrors

Sold Separately
PSR Dualsport Mirrors round PSR Dualsport Mirrors oval

PSR dualsport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter, both on our Dual-Sport page.

Sold each. If you need a set, please order 2.


$22.95

Folding Dualsport Mirror

XT225 All

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price of the KTM part. Sorry, right-hand thread only.

Need the Yamaha Mirror Adapter below for the right side!


$9.95

Yamaha Mirror Adaptor

XT225 All

This adaptor will give you more mirror choices. The TW200 requires a mirror with reverse threads on the right (throttle) side of the handlebars. This adaptor allows you to mount a mirror with standard 10mm threads on the right side of your handlebar. This opens up many options for your mirrors, choose any 10mm mirror for your XT!

$49.95

Bar-End Mirrors

Sold in Pairs
Bar-End Mirrors

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

Select Size & Color


$59.95 - $67.95

Handguard kit

XT225 All

Alloy handguards with inner mounts that are contoured to allow space for the clutch cable and brake hose.

Images below show a set of these handguards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. Looking good! If you look at the far right image, you will see that you need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp needs to go over the front brake line while on the clutch side it goes under the cable.

  
Choose Color:





$24.95

Handguard Deflectors

XT225 All

Fits Moose and other aluminum handguards

  • Aerodynamic and stylish design
  • Protect hands from brush and water as well as cold wind
  • Simple installation
  • Sold in pairs
  • These look great on the little XT!
Select Color:

$139.95

Acerbis X-Factor Hand guards


Acerbis X-Factor Hand guard

New from Acerbis, these hand guards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest we have ever seen.

Works with 7/8" or 1-1/8" bars.

Luggage Racks

Back to Top

$179.95

New! 020615

Pro Moto Billet Rack

XT225 All (Made in USA)

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem. See bottom image.

$85.00

Rear Rack

XT225 All (Made in USA)

Nomadic Racks makes this beautiful rack for the XT225. 3 piece unit that is CNC laser cut from 1/8" 5052 plate aluminum with a semi-gloss industrial black powder coat applied. Final surface space is 9 x 14 with a weight just under 2 pounds.

With all the hardware included and excellent instructions, mounting this rack to the 4 mounting points is usually no more than a 15 minute affair and no modifications are required to your XT.

There are numerous strap and bungee holds making for a very versatile little unit. It is also totally compatible with RotoPax mounting kits (see below) and Givi top cases. Bottom right image shows a RotoPax mount, this is not included.

$129.95

Borrego Cargo Rack

XT225 All (Made in USA)

This is the famous Borrego rack by TCI products. Just 5.6 pounds, it mounts under the rear grab rails and does NOT require you to relocate the stock turn signals.

The rack is 17" wide and 10" long. Welded mild steel tubing that is powdercoated metallic silver to match any XT.

! Allow 1 extra week to get from manufacturer.

$199.00

Happy Trails SL Side Racks

XT225 All (Made in USA)

The Happy Trails SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags.

Features:

  • Thoroughly tested 4th generation side racks
  • Three point mounting system (includes mounting hardware)
  • Strong 5/8" round tubing for the arms and SL mounting loop
  • Racks add protection for the bike in the event of a tip-over
  • Each rack is fabricated by expert craftsmen
  • Racks finished with a black powder coat

Go to our Luggage Page and pick out any set of qualifying side bags or cases and get $20.00 off side racks!

Select Size/Color:

ROK Straps

The ultimate stretch strap

These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hooks - tie down straps.

ROK Straps are a must have for any dual sport or adventure rider!



ROK Straps are a two-piece strap that has a quick-release buckle in the middle and loops on each end.
One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks
that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around
your frame, rack or other secure point and then back through the loop in the end making for a very secure
mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap
until your load is firmly held in place.

Luggage

Back to Top

Saddlebags & Hard Cases


Choose from a huge selection of sidebags and hard cases from top brands.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop
  • Moose Racing

Tank Bags


Tank bags provide easy access to personal items and come in a variety sizes, styles, and colors.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop

Duffel Bags


Select from an assortment of sizes, designs, and brands.

  • Wolfman Dry Bags and Rolie's
  • Saddlemen Destination Pack
  • Givi waterproof bags
  • Firstgear Torrent bags

Top Cases


Top cases by Moose Racing allow easy access and transportation of items for long rides or daily commuting.

  • Expedition Aluminum Top Cases are a perfect match for the Expedition Side Cases. Available in 25 or 38 liter sizes
  • Expedition Hard Top Cases are perfect for daily commuting and errands around town. Available in 28 or 47 liter sizes

Fender Bags


No larger image

Fender bags are perfect for carrying tools and tubes on any adventure.

  • Wolfman 1.25 Liter front fender bag
  • Moose Racing removable rear bag
  • Wolfman 3.5 Liter tool bag
  • Chase Harper rear fender pack

Accessories


Luggage accessories to complete your luggage set.

  • RotoPax fuel and water containers
  • ROK Straps
  • Universal Mounting Kits
  • Much more!

Helmets & Apparel

Back to Top

Dual Sport Helmets


We have put together a great list of dual sport helmets for any budget.

  • Arai XD-4 Dual Sport features great quality and looks
  • Shoei Hornet X2 for serious dual sport enthusiasts
  • Bell MX-9 Adventure new for 2015 is everything you want at a great price
  • AFX 41-DS Dual Sport features an inner flip down sun shield
  • Fly Trekker gives great quality and price

Rain Gear


Stay dry with quality rain gear by Frogg Toggs. Frogg toggs is committed to providing the best in affordable, innovative rainwear technology. ToadSkinz technology is a newly developed hybrid fabric that was engineered by the frogg toggs research team. This unique new material has the look and feel of a traditional polyester rain suit but with a non-woven inner layer that provides guaranteed waterproof and windproof performance in a lightweight garment with great breathability.

Gloves


Choose from a great selection of Firstgear dual sport gloves.

  • Ultra Mesh Gloves
  • Kilimanjaro Gloves
  • Kathmandu Gloves
  • Cold Weather Gloves
  • Many More!

Accessories


We have put some common sense dual sport items on our accessories section and will be adding stuff as we find it.

  • Hydration packs by Thor and Moose Racing
  • Backpacks from American Kargo and Moose Racing
  • Neck warmers and High-Vis vests

Dual Sport Apparel


Choose from top of the line jackets, pants and our every own ProCycle T-shirts

  • Kathmandu jacket and pants
  • Urge overkill Jacket
  • Adventure Mesh jacket
  • Firstgear Thermosuit
  • Kilimanjaro jacket
  • And more!

Heated Gear


Stay warm on those long winter rides with top of the line heated gear.

  • First Gear heated clothing features Nickel Alloy heating technology
  • Venture heated gear comes standard with harness and controller
  • Heat Pump Vest and battery powered gloves also available
  • Check out our Seat warmer and Heated grips

Footwear


Our favorite dual sport boots have been tested and approved by the ProCycle staff.

  • New! 100115 Forma Adventure Boots
  • Icon Raiden DKR Boots
  • Alpinestars Scout Boots
  • Gaerne Balance Oiled boots

Accessories

Back to Top

Maps and Navigation



Check out our Maps and Navigation page! Here is where you can find the latest and greatest in GPS units, fantastic printed maps and pretty much anything you need to get you from here to there and back. Or maybe from here to there and then on to someplace else! Just click here or on the gray button below.

  • Butler Maps
  • Benchmark Maps
  • Delorme Maps
  • Garmin GPS Units
New! 052316

ProCycle NAVIGATOR


Navigation doesn't get any simpler than this. Here is the ProCycle 'binary' Navigator. Don't know which way to turn? Flip the NAVIGATOR and follow your nose. It is guaranteed to lead you somewhere. Probably some place you have never been.

$19.95

New! 081517

BrakeFix Parking Brake


BrakeFix

Simply slap this baby over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock black portion down. Takes all of about 5 seconds. Viola! A locked front brake making parking safe and secure.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

$14.95

JIS Screwdriver Kit


The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws are very easy to strip if you are using a regular Phillips screwdriver.

Here is a little kit that will make removing and replacing JIS screws much easier. A small portable handle with its own collection of 4 various bits, along with 2 each JIS No. 1, No. 2 and No. 3 bits. These will work in any other bit holders you may have and have a slight magnetic end to hold a screw while you start it.


$12.95

Tow Strap


When you need the Buddy Tow, it's priceless! This is the only tow strap made expressly for motorcycles and ATVs. Tucked away in its carrying case attached to you handlebar or crossbar, the Buddy Tow is always ready when you need it.

This simple accessory - 12' of 1785 lb. test strength 1" webbing in a handy carry pouch should be a standard part of every rider's kit. Whether used to tie your bike down in a truck or ferry boat's car deck, tow a friend into the nearest gas supply or hold down a tent the Buddy Tow has endless uses.

Select Size & Color:


ROK Straps



These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hooks - tie down straps.

ROK Straps are a two-piece strap that has a quick-release buckle in the middle and loops on each end. One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around your frame, rack or other secure point and then back through the loop in the end making for a very secure mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap until your load is firmly held in place.

when you need to take your load off. Simply undo the buckle. When you put your load back on, click the buckle, give the strap a tug and away you go. Very simple and easy.

$119.95

Wolfman Enduro Tank Bag

(Made in USA)
Wolfman enduro dualsport tankbag tank bag

A 4-point quick release mounting system and no-skid/no-scratch pad keeps the Enduro Tank Bag in place during the most aggressive riding. The innovative design allows the bag to sit on the tank and not interfere with the gas cap or the vent hose.

The mounting harness is now the same for the Enduro Tank Bag, the Enduro Pocket and the Small Expedition Tank Bag. Easily swap between the bags as your needs change - without changing the harness. Capacity: 6 liters.

Refinements for 2017 include: An adjustable and removable interior clear divider pocket on a hook & loop system as well as a removable/adjustable bunji-cord across the top that provides a convenient spot for gloves and such while fueling. (Please don't ride with your gloves under the shock-cord or you may never see them again.) Lastly, a new under buckle tab design to keep your tank scratch-free!

139.95

Vapor Speedometer / Tachometer

XT225 All

Available in Black (Stealth model).

Features Include:

  • Current Speed
  • Maximum Speed
  • Selectable MPH/KPH Display
  • Real-Time RPM Bar Graph
  • Numeric RPM Readout
  • Dual Programmable Shift Lights
  • Up to 20,000 RPM
  • Ambient Temperature
  • Engine Temperature (sensor included)
  • Dual Programmable Temp Lights
  • Clock, Hour Meter, Stop Watch, Ride Time, Accumulated Ride Time
  • Adjustable Distance, Permanent Odometer, Selectable Mile/Kilometer Display
  • Includes power connection, accepts any power input - AC/DC, auto switch to internal power if external is removed, permanent memory guarantees data is never lost

Click here to read a 'Ride Review' on the Vapor

$54.95

Trail Tech Vapor Indicator Dashboard

XT225 All
Trail Tech Vapor Indicator Dashboard
  • Optional plastic dashboard with indicator lights protects the computer and places it in an optimum viewing position.
  • Included mounting bracket installs easily to triple clamp of most motorcycles.
  • Includes an assortment of indicator light lenses allowing customization to fit your needs.

Click here to read a 'Ride Review' on the Vapor & Indicator Dashboard by Jeff.

$36.95

Smart Caps


Ride-On offers riders a first-class Tire Pressure Monitoring System known as an LED Smart Cap.

A blinking red light on the Smart Cap indicates a loss of 4 PSI or more. Has a 3 year battery life.

If you purchase a 2-pack motorcycle pack you will enjoy FREE Ride-On LED Smart Cap Roadside Assistance (for public roads only). You will find detailed information on this FREE service on Ride-On's website. Click here to read more from their website.

$17.95

Updated! 041118

Warp 9 Valve Stem Puller Tool


Warp 9 Valve Stem Puller Tool
Warp 9 Valve Stem Puller Tool

Warp 9 got tired of their old design of the valve stem puller tool, so they made a few other revisions while they were at it (requiring 2 new patents!). Here is the list of the features of the new CNC machined tool.

  • Stainless Steel tip, won't break or bend like old brass tip
  • Ribbed head for positive grip and easy core removal
  • Core tip threads into handle to protect tip from damage
  • Includes spare valve core in handle for easy trail side repairs
  • Tapered handle ends to make tip removal easier with gloved hands and-non square edge doesn't damage tool bags
  • Knurled aluminum handle for additional grip

$35.95

Mini-Morph Pump


Mini-Morph Pump

The Mini-Morph is actually a bicycle pump, but is probably the best compact pump we have found for adventure / dual-sport riding. It has a fold-out foot and handle as well as a 4 inch hose so you can set it on the ground to pump. This thing is small enough to stow away in a until you need to add air after a flat or just pumping your pressures back up after some serious off-road action.

Mini-Morph Pump Mini-Morph Pump

$49.95

Digital Voltmeter and Bracket


Digital Voltmeter and Bracket

A digital voltmeter that can be mounted almost anywhere thanks to our multi-position stainless steel bracket. This will tell you how your charging system is doing and whether or not you need to turn off the laptop and in-flight movie system for awhile. Completely waterproof and comes with connectors, wires and thorough instructions. We consider this a 'must have' device for riders who use heated riding gear, heated grips, additional lighting, etc.

Digital Voltmeter and Bracket Digital Voltmeter and Bracket

$8.95

Motul C5 Chain Paste


A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes. Chain Paste is easy to carry with you on those long trips.

Motul C5 Chain Paste Motul C5 Chain PasteMotul C5 Chain Paste

$5.95

Motul M4 Hands Clean


Motul M4 Hands Clean

A handy addition to the tool box or in your traveling pack. This is amazing stuff! Rub a little bit of the paste onto your dirty hands and it lifts the dirt right off. A little more rubbing turns it into dry flakes that brush away. M4 Hands Clean is not messy or greasy.

$0.00

Tiedown Strap Rings

(Made in USA)
  • Constructed of stainless steel and is break-rated at 2,000 lbs. Far exceeds all other tie-down hooks or carabineers on the market
  • Attach tie-downs almost anywhere there is an 8mm bolt
  • Originally designed to give you a place to attach tie-downs to the triple clamp of a dirt bike but there are many other uses, such as bungee attachment points or in the bed of a truck or trailer, behind passenger peg bolts on a street bike or anywhere you can put a bolt.
  • Eye is large enough to accept the large size 3/8 in. coated tie-down hooks as well as carabineers
  • Packaged in pairs

$19.95

New! 031017

Motion Pro Cable Luber V3


Motion Pro Cable Luber V3

A new type of cable luber from the tool people at Motion Pro. Designed to seal completely around the cable housing and stop all those messy leaks. Because the unit is closed and sealed before pumping the lube down the cable, your cable gets more lube! A lubed cable is a happy cable!

Keeps things clean and simple. No more lube running down your arm. Works on most cables with a 4mm to 8mm OD housing.

$20.95

Dri Slide Cable Lubricant


Goes on wet but evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, and prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.

$19.95

Stash Box Locking License Plate Storage



The Stash Box is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, lockable, vehicle styling is unaffected, and easy accessibility.

  • Sized to work with all standard size license plates as well as the current Wisconsin and Ohio plates
  • External Dimensions: 7" x 4" x 1" plus 1" on the width for the lock
  • Made from molded polypropylene
  • Includes all mounting hardware, retention pouch for paper documents, foam insert, lock and two keys

$19.99

New! 051717

Moto Caddy Document Holder

(Made in USA)
Moto Caddy Document Holder
Moto Caddy Document Holder

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go. The Moto Caddy is really two containers in one - the longer side is 4 inches long, good for your paperwork, while the other end has a 1 inch depth, perfect for some emergency coins!

$14.95

Super Siphon


Super Siphon

This is a new and improved Super Siphon with a longer and larger hose (1/2" x 6´) makes it even easier to transfer fuel from one bike to another! Simply shake the hose to prime it and get fuel moving. With 6 feet of hose it is no problem to reach whatever needs a bit of your gas. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up and stuff it in your bag and you will be very happy when you need it. And need it you will one day.

$49.95

Snapjack Portable Jack


The Snapjack is an easy to use, portable, sturdy jack for chain lubricating, adjustment and chain drive maintenance. Also simplifies cleaning. It can lift the rear tire up to 1/2" to allow the tire to spin freely. Includes front brake locking strap and handy carrying bag.

$19.95

Deluxe Folding Saw


A must have when blazing new or old trails!

  • Soft rubber handle
  • Thumb latch release for safety
  • 8" blade, 9" folded length
  • Steel frame

$37.95

Haynes Repair Manual


With a Haynes manual, you can do it yourself…from simple maintenance to basic repairs. Haynes writes every book based on a complete teardown of the motorcycle. Haynes books have clear instructions and plenty of photographs that show each step.

  • Step-by-step procedures
  • Easy-to-follow photos
  • Complete troubleshooting section
  • Valuable short cuts
  • Color spark plug diagnosis

Complete coverage for your Yamaha Trail Bikes covering PW, RT, TT-R and XT225/350 models for 1981 thru 2000.


$6.95

Cycle Wipes


Cycle Wipes are pre-moistened and pre-folded towelettes made with a special non-woven "Dirt-Grabbing Mesh Fabric," which is a fancy way to say that they are soft, gentle, durable, and a lot safer than that old rag or paper towel.

Their formula contains no harmful ammonia and is specifically formulated for helmet face shields.


$26.95

HelmetLok


HelmetLok
HelmetLok

New HelmetLok is coated to protect your helmet and bike. Small and compact enough to fit in your pocket, jacket or on your belt loop. HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point. A 'T' Extension is included if you need additional space between the lock and your helmet.

Don't be weighed down carrying your helmet around anymore. Just use the simple to operate, carabineer-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy security and freedom with a HelmetLok.

Click here to add the GearLok Cable to secure your helemt and jacket together!


$47.90

Tire Iron Wrenches

XT225 All

Don't hit the trails without these tire irons. Each 10 inch forged steel tire iron has a hex wrench on one end. A 22mm and a 19mm that will remove both axles. Rounded spoon end minimizes pinched tubes and scarred rims.

$44.95

MotoPressor Pocket Pump


The MotoPressor is a compact pump unit that weighs only 1.5 pounds and fits in the palm of your hand. MotoPressor very cleverly omitted the plastic housing you find on other pumps. This makes it smaller and easier to carry with you. Included is a 25 inch long inflator hose, with a hands-free lock-down delivery valve. You also get a SAE power cord that attaches to your battery and stays there. The Pocket Pump has an 8.5 foot cord to give your air supply plenty of reach. All this packs into a heavy duty neoprene pouch.

MotoPressor will pump the front or rear tire of your motorcycle from flat to approximately 30 psi in 2 minutes and is capable of pumping to over 100 psi. Use it to inflate tires, top off your air shocks, air forks, inflate air beds or anything else.

If you will use the MotoPressor on a CANbus BMW please click on the More Information button.

! Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery and bypasses the motorcycle's electrical CANbus system. The CANbus monitors and limits the amperage of the accessory outlet. When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working. It is not the fault of the Motopressor.

If you have a CANbus equipped bike and you are not SURE about using the accessory outlet, use the alligator clips to get power from your battery or better still connect the supplied SAE terminal connectors to your battery and get power from there.

$33.95

Mini Air Compressor


Portable 12v compressor is perfect for any tool kit. This unit weighs in at only 14oz and measures just 4"x2"x6"

Features a built in LED light and 0-120 psi gauge

• Comes with everything shown

$17.95

Tirepro Digital Tire Gauge


  • Large display, readings are shown to 0.1 psi
  • Kpa and Kg-cm2 scales also provided
  • Reads up to 99 psi
  • Ergonomic shape fits nicely in your hand
Select Kit


Tool Kits



Here are two tool kits that are ready to go. All of the tools are here, just toss it in your bag and hit the road or trail.

Deluxe Tool Kit (top) includes: Combo wrenches (10mm, 12mm and 14mm) 8" adjustable wrench, 6-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 13/16"), spark plug gap gauge, locking pliers, flashlight, electrical tape, cable ties, mechanic's wire, WD-40, tire pressure gauge and shop towel all enclosed in a heavyweight nylon shell with YKK zippers. Dimensions: 6" L by 9" W by 1-1/2" H.

Fanny Pack Tool Kit (bottom) includes: Combo wrenches (10mm and 12mm), 8" adjustable wrench, T-Handle PackWrench (8mm, 10mm and 12mm), Hex Key Set (4mm, 5mm and 6mm), 4-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 13/16"), locking pliers, needlenose pliers, 22mm Axle Hex Adapter, electrical tape, cable ties, mechanic's wire, 2 tire levers, tire pressure gauge and shop towel. All of these tools are in a 5040-denier nylon fanny pack designed to handle heavy abuse on the trails. Dimensions: 7" L by 10" W by 1-1/2" H.

$28.95

Trimax Rotor⁄Disk Lock


This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.

Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.

$9.95

Cable Luber


Keep your cables lubed up and working freely. This tool is used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the far end, the cable is lubricated.

$13.95

Electrical Circuit Tester


Circuit Tester

Installing new turn signals or brake lights and need to find the 'hot' wire? Or are you just trying to find out if a specific wire has power going to it? Either way this test light can help you locate shorts, open and voltage on 12-24 volt DC circuits.

Didn't find what you are looking for?
We have millions of parts and accessories not listed on our site available from our vendors.