Featured Products

Back to Top
New! 112917

ProCycle Tri-Fold Hat


ProCycle Tri-Fold Hat

Everybody hates to take their helmet off and have a terrible case of helmet hair. Maybe you just want to protect your head from the bright sun of the day. Whatever the case, our new ProCycle branded hat from MotoSkiveez easily and quickly folds up into a small compact unit that fits into a pocket or tank bag. Whenever you stop, whip it out, give it a shake and put it on, all in less than 10 seconds. Then you don't have to worry about scaring small children with goblin like hair!

ProCycle Tri-Fold Hat
New! 051817

Seat Concepts Foam & Cover Kit

(Made in USA)
Seat Concepts Foam/Cover Kit

Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points - all making for a more comfortable time in the saddle.

New! 122917

JNS LED Headlight


JNS LED Headlight

BE SEEN and see better! One of the biggest advantages of LED lights is being seen by other vehicles. Sure, the nighttime vision is GREAT but not having that car pull out in front of you is even better. Change that front light out to something that gets you seen and lets you see better!

New! 112917

Moto Caddy Document Holder

(Made in USA)

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go.

Moto Caddy Document Holder

Engine

Back to Top

$29.95

Hi-Flo Oil Filter Value 10-Pack

DR200/SE '86-Current

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

$11.95

Magnetic Drain Plug

DR200SE '96-Current

Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine.

Select Kit


O-Ring Kits

DR200SE '96-Current

Fresh O-rings insure a tight seal and no oil leaks.

Oil change kit includes O-rings for: Filler cap·Filter cover·Strainer cap·Filter seal.

Valve inspection kit includes O-rings for: Valve inspection caps·Timing inspection cap·Timing plug cap.

$19.95

Valve Stem Seals

DR200SE '96-Current

A set of four high quality valve stem seals.

Select Gaskets






Engine Gaskets

DR200SE '96-Current

Genuine Suzuki replacement gaskets.

Complete gasket kit includes all gaskets and oil seals necessary for rebuilding your engine.

$43.95

EBC Clutch Kit

DR200 All
A full set of EBC friction plates. Order a gasket from the listing above.

$18.95

EBC Clutch Holding Tool

DR200/SE '86-Current
clutch tool

Need to remove your clutch assembly to get at that dreaded neutral safety switch? This holder is the quickest and easiest tool out there to get a grip on that hard to handle hub. Laser cut to the exact pattern that EBC makes their clutch plates from, it makes loosening and re-tightening the clutch nut easy. All of that and no worries about doing any damage to your expensive clutch hub.

$2.95

NGK Spark Plug

DR200/SE '86-Current

When you require the best, count on The World Leader in spark plug technology NGK Spark Plugs. Stock D8EA plug to replace your worn one.

$5.95

Drain Plug Washers


A 10-pack of drain plug sealing washers. Replace your sealing washer at every oil change to prevent an oil leak.

$17.95

New! 120216

Valve Adjustment Wrench Set


  • Heat treated and chrome plated for durability
  • Includes 10mm socket with straight slot adjuster
  • Fit motorcycles and ATVs with straight slot screw-type adjusters and 10mm lock nuts

$7.95

Feeler Gauge


Stock intake and exhaust clearance range is .003" - .005". This gauge reads .004" - .005" getting you right in the sweet spot.

$139.95

Barnett Clutch Kit

DR200SE '96-Current (Made in USA)

Since 1948, Barnett clutch plates and springs have been made from the finest materials available.

  • 6 Kevlar friction plates
  • 5 Steel drive plates
  • Clutch springs
  • Clutch cover gasket

$75.95

Suzuki Service Manual

DR200SE '96-Current

Genuine Suzuki Factory Service Manual for the DR200

Fuel Systems

Back to Top

$74.95

Dynojet Jet Kit

DR200SE '96-Current (Made in USA)
  • Moose Racing Dynojet jet kits provide a simple and affordable solution to carburetor tuning problems
  • Kits increase power and smoothness throughout the rev range while maintaining optimum fuel economy
  • Made in the USA
Select Line Size/Color


Premium Fuel Line

Sold in 30" lengths
Premium Fuel Line

30" of new fuel line in the size and color you desire. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, direct sunlight, hardening and cracking.

Click here for a fuel filter for your 5/16" line or click here for filters for your 1/4" line.

You can also click here to order a set of 8 fuel line clamps to secure your line to your inlets and filters. Sized to fit your particular line.

$5.95

Fuel Line Clamps


Ordering new fuel line? How about a set of zinc plated clamps to go with that new line. These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

$7.95

5/16" to 1/4" Fuel Line Reducer

(Made in USA)
5/16" to 1/4" Fuel Line Reducer

Hose reducer to go from 5/16" line down to 1/4" line. Could be used to go up from same sizes should you need to also. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provides a secure fit.

$6.95

New! 010518

Mikuni Pocket Tuner


Mikuni Pocket Tuner

A handy pocket size slide calculator from Mikuni to help you calculate jetting changes due to temperature and elevation changes. Will work for single and multiple cylinder machines whether 2 or 4 stroke. Also includes a guide for determining rich or lean conditions.

$7.95

Star Tron Fuel Stabilizer


Stabilizes gas for short and long term periods of inactivity (up to two years) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. 8 oz bottle treats 48 gallons of fuel.

  • Cures and prevents ethanol fuel problems
  • Helps prevent phase separation
  • Makes engines start easily, run smooth

$30.95

Twin Air Filter

DR200SE '96-Current

Twin Air's high quality materials and superior construction deliver unbeatable performance and protection. The hands-down choice of more World and National Champions than all other filters combined.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.

$12.95

Filtered Air Vents

Sold in 6 packs

More air flow allows you to add more fuel to your intake mixture, increasing performance.

Choose Quantity:

5/16" Fuel Filter


5/16" Fuel Filter

This filter is meant for 5/16" fuel lines. Only 1/2" thick once the fuel lines are in place, it is small enough to fit just about anywhere.

Need some clamps to secure your line and filter? Click here for the proper sized clamps.

90 Degree Bend

Straight

1/4" Fuel Filters - 90 Degree or Straight


1/4" Fuel Filters - 90 Degree or Straight 1/4" Fuel Filters - 90 Degree or Straight

The small size and right angle hose barbs make it easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Need some clamps to secure your line and filter? Click here for the proper sized clamps.

$42.95

Carburetor Repair Kit

DR200SE '96-Current
  • Complete kit from Moose Racing to rebuild the OEM carburetor
  • Each kit contains all necessary gaskets, O-rings, float valve and jets
  • Supplied to Moose Racing by the same supplier the OEMs use

Drivetrain

Back to Top

Front $17

Rear $30.95

JT Steel Sprockets

DR200/SE '86-Current

JT Sprockets is the world's leading manufacturer of aftermarket sprockets, constantly raising the industry's standards for quality and service. JT Sprockets are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.

Select Type:

520 Master Links


Always carry a spare master link when out on the trail.


! Master links are not interchangeable. Be sure to match the manufacturer and series of the chain.

$8.95

Motul Chain Paste


A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes.

$8.95

Renthal Chain Lube


Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.

The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.

$16.95

Chain Breaker Tool


Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.

$55.95

EK SRO6 520 O-Ring Chain

DR200/SE '86-Current

The SRO series chains offer a value-priced O-ring chain that will not compromise on quality or durability. Features include lightening holes, high-tech heat-treated steel alloys and all the exact same quality and craftsmanship that EK puts into their entire product line

$109.95

New! 100115

DID Pro VX-Ring 520 Chain

DR200/SE '86-Current

X-Ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-Rings and other makers' modified O-Rings have squashed points that increase friction. The twisting action of the X-Ring disperses the pressure and minimizes power loss.

The DID Chain comes in a 120 link length. You will have to shorten it to 112 links to fir the DR200.

$19.95

Master Link Pliers


Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.

$13.95

The Grunge Brush


Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes

$12.95

360° Chain Brush


This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance of the chain, the sprockets and the engine. This brush will fit any 400 or 500 series chains.

Suspension

Back to Top

$19.95

Fork Seal Skins

Sold in pairs
Fork Seal Skins

Here's an alternative to standard rubber fork boots. Seal Skins also help protect vulnerable fork tube and seal from dust, dirt, and corrosive elements. These are made of neoprene and sewn into a tube. They do require that you drop your fork tubes down out of the triple clamp for installation. They can still be slid up for easy cleaning.

Choose Color:

$24.95

New! 111017

Fork Boots

Sold in pairs
Fork Boots

Are your stock fork boots cracked and letting grime into your fork seals? Just want to change the color of your stock boots? Here are a set of aftermarket fork boots for your TW.

Choose black, red, royal blue, yellow, or light blue.

 

fork boot red fork boot royal blue fork boot yellow fork boot light blue

$34.99

Race Tech's Motorcycle Suspension Bible


Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.

The three forces of suspension, testing procedures, even the black arts of chassis geometry: Thede explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.

$27.95

Fork Seal Kit

DR200/SE '86-Current

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.

$19.95

Fork Oil Level Gauge


Having the proper fork oil level is imperative to the handling of your bike. Setting the correct fork oil level is a snap with this fully adjustable gauge. The adjustable aluminum level plate can be set from 0 to 295mm. The oil reservoir has single milliliter markings up to 60ml.

Being able to accurately tune your forks by adjusting the oil level can make them better resist brake dive or bottoming. Oil level should be thought of as a fine tuning method to make your choice of spring rate work perfectly for your bike.

$13.95

Maxima Fork Oil


Maxima Fork Oil

Two 16oz bottles of Maxima fork oil that will refill your tubes after any fork job. This is a high-quality fork oil and what we use on our projects here at ProCycle.

$34.95

New! 032618

Linkage Bearing Grease Tool


DRC Link Lube Injector

Makes installation of your linkage bearings much easier. Also simplifies maintenance of those bearings.

  • Linkage bearing grease tool
  • Allows placing bearing needles on bearing race while greasing linkage bearings
  • Will thoroughly apply adequate grease on your suspension linkage bearings

Exhaust

Back to Top

$319.95

FMF Q4 Slip-On Muffler

DR200/SE '09-Current(Made in USA)

The FMF Q4 has always been in a league of its' own and the latest Q4 HEX is the most significant upgrade to date. You don't need to settle for a plugged up moto muffler hampered by an insert when you can have a compliant muffler engineered for performance.

  • Power gains throughout the entire rpm range
  • Pounds lighter than stock
  • Spark arrestor included

$32.95

Stainless Steel Heat Shield


This universal heat shield provides great looks at a great price.

  • Fits all 1-1/2" - 2-1/8" Pipes
  • Measures 7-1/4" x 3"

$34.95

FMF Heat Shield

(Made in USA)

Have you lost your stock heat shield, or need one on an aftermarket head pipe? FMF makes this nice unit that includes clamps, heat shield with the FMF logo and button head screws to hold it on.

Choose Color:

Cycle Performance Exhaust Wrap

(Made in USA)
Cycle Performance Exhaust Wrap

Set your bike apart with a custom exhaust look.. Withstands direct heat up to 2000°F

  • 2"x25' wrap available in black or natural
  • 4ea stainless steel tie wraps

$17.95

Muffler Joint Gasket

DR200/SE '86-Current

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but the all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.

$9.95

Exhaust Gasket

DR200/SE '86-Current

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.

$33.95

Pipe Armor


Pipe Armor Pipe Armor

Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.

$31.95

Universal Stainless Repack Kit

(Made in USA)

Re-pack your silencer with this pro-quality, three layer packing system and restore the power you have blown out.

Kit includes:

  • 60"x20"x1⁄4" glass mat.
  • 7"x20" stainless wool
  • 8"x20" stainless mesh
  • Twelve 3⁄16" rivets
Choose Length:

Muffler Packing Pillows

(Made in USA)
Muffler Packing Pillows

The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal and easy to install. Pillow can be trimmed to length to fit different mufflers. Comes with cap stuffer to fill packable end caps.

Lighting & Electrical

Back to Top

$139.95

Vapor Speedometer / Tachometer

DR200SE '01-Current

Vapor's large digital tachometer bar graph is easy to read and understand. This digital gauge has many useful features including speed, RPM, engine temperature, adjustable distance, stopwatch and odometer. Vapor also features two LED indicators for customizable shift indicators and engine temperature warning.

Includes mounting hardware, speed sensor, magnet kit & temperature sensor.

$54.95

Trail Tech Vapor Indicator Dashboard


Hitting the streets? The Indicator Dashboard gives you what you need to get your dash street legal, from high beam, turn signals, oil, and beyond. With eight different indicators included, customize your dashboard your own way. Attaches to Trail Tech Vapor/Striker and installs easily on the triple clamp of most motorcycles.

Includes eight indicator lights for customization: low beam, high beam, turn arrow left, turn arrow right, turn arrow left and right (hazard), oil, Neutral, and Reverse.

$79.95

072417

Lil' Lightning Ultra Slim Jump Start Pack


Ultra Slim Jump Start Pack

This is small package that has a 12 Volt, 6000 mA-h grade A lithium cobalt oxide battery with 200 amp jump starting ability, enough power to start your motorcycle numerous times. Included in the kit are plug-in jumper cables, 5v USB, Micro USB, iPhone 4 and 5 adapters as well as 110v and 12v chargers all in a fire proof carrying case. The Ultra Slim also has a high-powered LED flashlight with SOS emergency flash mode. All of this in a package that weighs just 8 oz. and is 5 1/2" x 3" x 1/2".

Choose Package:


Micro-Start Portable Jump Start and Power Supply




A device that you can keep in your fanny-pack, backpack or even pocket that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices.

  • XP-1 is 6" x 2 7/8" x1" 14oz.
  • XP-3 is 5" x 2 7/8" x 1" 12oz.
  • Holds a charge for up to a year.

Review by Dirt Wheels Magazine

XP-1:
  • 200 Amp- 400 Peak Amp
  • 12000 mah Capacity
  • 19V Output Port for Laptops
  • 12V Standard Output Port
  • 5V 2A USB Port
  • Detachable Mini Jumper Clamps
  • 3 power ports: 19v for lap tops, 12v standard output, and a USB 5v output for USB powered devices
  • A Universal Cable with 8 different detachable tips to fit all the different brands of Laptop charging ports (Apple, Acer, Dell, HP, Asus, and more)
  • A Universal Cable for 12v standard plug accessories such as Mobile DVD players and heated gear. (8amp max)
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-1)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-1)
  • Nylon zippered carrying case
XP-3:
  • 200 Amp- 400 Peak Amp
  • 8000mah
  • 5V 2a USB Port
  • Micro-Start XP-3 Unit
  • Detachable Mini Jumper Clamps
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-3)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-3)
  • Nylon zippered carrying case

$36.95

Battery Tender Jr. 12V Charger


  • Fully automatic two-stage lead-acid battery charger
  • Lightweight, compact size is ideal for those hard-to-reach spots
  • Trickle charger ensures batteries are maintained after charging and always ready to go
  • Ideal for all lead-acid, sealed maintenance-free and gel cell batteries (not recommended for lithium iron batteries such as the Shorai)
  • After full 14.4VDC charge is reached, converts to float charger and monitors battery at 13.2VDC; when voltage drops below 12.6VDC, charger resumes charging back to 14.4VDC
  • Two-color LED indicator (red light = charging; green light = storage)
  • Spark-proof
  • Reverse-polarity protected
  • 12' output cord and quick-connect harness
Choose Package:

Koso Mini 3 Temp/Clock/Volt Gauge


click to enlarge
click to enlarge

This Mini 3 meter was designed to help you monitor basic information before and during a ride. Check the condition of the battery before leaving and the voltage of your system during the ride. The ambient temperature function will give you a good reference about how to dress prior to and what is happening during your trip. Very handy to know if the temperature is near or below freezing. The large clock makes it easy to know if you are on schedule or not.

Dimensions: 2.4" W x 1.2" H x .5" D.

Available for the Mini 3 is a nicely crafted mounting plate that allows you to place your new gauge wherever you like.


$49.95

Digital Voltmeter and Bracket


A digital voltmeter that can be mounted almost anywhere thanks to our multi-position stainless steel bracket. This will tell you how your charging system is doing and whether or not you need to turn off the laptop and in-flight movie system for awhile. Completely waterproof and comes with connectors, wires and thorough instructions. We consider this a 'must have' device for riders who use heated riding gear, heated grips, additional lighting, etc.

imageimage

$59.95

Brake Light Safety Pulser

(Made in USA)
Brake Light Safety Pulser

Grab the attention of rear-enders! This device will pulse your brake light automatically to get their attention. There are over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device.

Features:

  • Independently programmable flash speed, flash duration, and pre-delay.
  • Works for LED or Standard Bulb Tail Lights.
  • All Solid State design.
  • Meets or exceeds OEM load rating specifications.
  • Designed for DC electrical systems (most are).
  • Over 1000 possible flash pattern combinations.
  • Simple programming setup with your brake lever.
  • Extremely compact unit size; 20mm x 20mm x 12mm.

$109.95

signalMinder


click to enlarge

The signalMinder unit is designed as a plug-in replacement for many Japanese bikes. This unit will automatically cancel your turn signal if you forget to shut it off.

  • Cancels signal at 10, 20 or 30 second intervals
  • Allows you to use turn signals as running lights
  • 4-way hazard option
  • Brake flash option

SM-3 unit is designed as a plug-in replacement for most Honda and some newer European bikes. signalMinder uses a computer chip to cancel the turn signals. There are three selectable time outs; 10, 20, 30 seconds.

RUNNING LIGHT OPTION: By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your bike.

Special Note! For 2009 and up Kawasaki models that have onboard computer diagnostics, or if you have Alarm system that activates turn signals, please select SN-4D harness shown below.

Using the DIP Switch #1, you can keep them off and still have the dual-channel system. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function.

BRAKE FLASH OPTION: will flash the turn signal lamps every time you apply brakes. A short 2 second flash pattern begins with quick flashes then slows down to stay on solid.

BRAKE OVERRIDE OPTION suspends the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing.


$29.90

Mini Turn Signals

4 Pack

These signals have short rubberized flexible stems and bright mini halogen bulbs.

$119.95

New

JNS LED Headlight

DR200/SE '15-Current
JNS LED Headlight

This kit is not just a bulb, but an entirely new LED specific headlight! A specially designed adjustable steel mounting bracket replaces the stock unit. Included is a wiring harness and all the required hardware to make this installation quick and easy and entirely plug and play. No cutting, no drilling, no wiring modifications are necessary. The headlight features separate low and high beam projectors in a custom headlight shell designed specifically for this LED bulb.

Check out the images below for stock vs. LED patterns and brightness images.

JNS LED Headlight  JNS LED Headlight  JNS LED Headlight  JNS LED Headlight

$64.95

3800 Lumen LED Headlight Bulb-H4


New and improved. Brighter (3800 Lumens), better low/high beam contrast, smaller, lower Kelvin color temperature (5500K), replaceable drivers and easier to install. All of these features and the most reliable LED bulb currently available. It only draws 20 watts.

This bulb fits H4 bases only, has Cree XML2 emitters and is fan cooled for extreme conditions. Further features include vibration proof and water-resistance, even complete submersion.

$16.95

Heavy Duty 12V H4 Bulb


Heavy Duty 12V H4 Bulb

This is a standard H4 bulb that has an 90 watt low beam and a 100 watt high beam. This is an easy lighting upgrade that should not over tax a stock charging system.

Choose Kit:


Trail Tech Equinox 60mm LED Light



Trail Tech's 60mm LEDs are perfect for any riding adventure, no matter the conditions. Throwing out over 1,000 lumens brightness at only 10 watts, it is one of the most efficient lights on the market.

Three power modes allow performance at any circumstance, from Hi mode for lighting up the night to Low mode for daytime driving light.

The anodized billet aluminum housing is durable and promotes better heat management. Aluminum reflector with vacuum metal deposition creates the most accurate spot beam.



$119.95

VisionX Solstice 10 Watt LED Light


Each 10 watt Solstice Solo produces 900 lumens. Roughly equal to a 50 watt halogen bulb. These are the brightest LED off road lamps on the market. The rugged and compact 2" x 2" square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod. Includes stainless steel mounting bracket and waterproof connection. The Elliptical pattern is wide and flat. Sold each.



RAM Light Mounts

For LED Auxiliary Lights

The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. We have 2 types to choose from. The Equinox mount fits Trail Tech Equinox lights or any other light with a 10mm or 3/8" mounting stud. The Solstice mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

Sold individually.

  

$14.95

ThumbDogs


ThumbDogs

These simple add-ons stretch and grip to the finger of your favorite glove using Grrprr technology. Users can operate a phone or any touch screen device and never have to remove their nice warm gloves.

A special conductive material enables you to interact with capacitive touch screens quickly and easily. There are two ThumbDogs to each package so you can double digit type just like you would in the real world. You can also put one on your index finger to operate your GPS.

$34.95

Noise Isolating Earbuds/Speakers


Noise Isolating Earbuds/Speakers

These lightweight ear buds function just like any other set of ear buds, but make a much better and more comfortable seal. This helps put the music (or phone, GPS, intercom, etc.) from the built-in speakers, where it matters most. The unique earplug design ensures that wind and engine noise is blocked and more sound from your audio device is channeled straight to your ear. They give you a 25dB sound reduction as an ear plug and allow you to listen to whatever device you can plug into. Save your hearing and hear your tunes.

The low profile allows them to easily fit under your helmet. Total length of wire is 44", enough to reach just about anywhere you need.

If you would like just standard high-quality NoNoise Ear Plugs, click here.

$99.95

New

Lithium Featherweight Firepower Battery


Lithium Featherweight Firepower Battery

Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals, it is non-explosive and non-combustible.

The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.

This is a 150 CCA (Cold Cranking Amp) battery.

$65.95

Yuasa 12V Maintenance Free Battery

DR200/SE '96-Current

Absorbed Glass Mat (AGM) Technology is an advanced battery design that eliminates water loss. Once it's filled with acid, you'll never need to fill it with water or check the acid level.

To remain factory-fresh, the AGM battery is shipped dry along with its own pack of high-gravity acid that's added at the time of installation.

Choose Battery:


Shorai Lithium-Iron Battery

DR200/SE '96-Current

Shorai batteries deliver more energy faster, with less weight and with less wear on the battery per start cycle than any other brand or technology available on the market today.

  • Up to 80 percent lighter than their lead acid equivalents
  • Improved starting performance
  • Does not sulfate while sitting
  • Three year warranty
LFX09L2-BS12
  • Weight 1.27 lbs
  • Amp hours 9
  • CC Amps 135
  • Dimensions: l= 4.45" w= 2.28" h= 3.5"

LFX14L2-BS12
  • Weight 1.46 lbs
  • Amp hours 14
  • CC Amps 210
  • Dimensions: l= 4.45" w= 2.28" h= 3.5"

Self-adhesive foam shims are included and insure a great fit to the battery box, as well as extra vibrational an thermal insulation.

Shorai Batteries require a charging system output of 13.1 Volts or higher at idle, and must not exceed 15.2 volts at maximum output. "Smart" lead-acid chargers with automatic cutoff may be used for periodic charging, but will NOT work as a tender/maintainer and should be disconnected immediately after charge has finished. Older lead chargers without automatic shut-off should never be used. Improper charging is dangerous and will void your warranty. A Shorai BMS Charger - with Store Mode - is highly recommended for anyone who rides less than twice a month. Alternatively, you may disconnect the negative cable from the battery for storage, and charge once per year in that case.


$76.95

Shorai Charger


You can charge your Shorai battery with a regular battery charger but if you want the very best for it, this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term long term maintenance storage.

Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.

For Shorai Lithium Iron batteries only

Choose Optimate:



Optimate Battery Maintainers/Chargers


Optimate Battery Maintainers/Chargers

Optimate 1 Global Charger-Maintainer

This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid filler cap / wet cell, sealed AGM (MF) or GEL battery without overcharging. Ideal for vehicles that are seldom or seasonally used, or in storage. Global Three-step charging program ensures effective charging of the battery and is totally safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or battery disconnected. Dust proof case with wall mounts, with 6ft AC supply lead and 6 ft. charge lead ending in SAE connector. Velcro strap slot to hang the charger on handlebar. Weatherproof battery lead & OptiMate battery clip set included.

********************************

Optimate Battery Maintainers/Chargers

Optimate 2 Maintainer

OptiMate 2 senses the battery condition, recharges and then keeps the battery 100% ready. The OptiMate maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Totally safe for vehicle electronics. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. Works with standard filler caps, and sealed maintenance-free units. Includes permanent ringlet connector with weatherproof cap and battery clips. Comes with global input (100-240V).

********************************

Optimate Battery Maintainers/Chargers

Optimate 3 Optimizer

Recovers sulphated batteries and then tests after charging. The maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Diagnoses, recovers, charges, tests and optimally maintains, automatically. Comes with global input (100-240V). For batteries forgotten over the winter, OptiMate 3 will recover them from deep discharge and optimally recharge them. Batteries status can be checked at a glance. OptiMate 3 will then maintain the battery at full charge safely for months at a time and increase life by up to 400%. Works with standard AGM, and gel batteries. Do not use with Lithium batteries.

********************************

Optimate Battery Maintainers/Chargers

Optimate Lithium

OptiMate™ lithium, the first OptiMate to protect your LiFePO4 battery unlike any other charger. Will protect your investment and keep your Lithium Iron Phosphate (LiFePO4/LFP) battery performing as advertised for a very long time. With 5 Amps of charge current available, OptiMate lithium's unique multi-step ampmatic™ program recharges and balances cells within the battery quickly and efficiently. Optimate lithium's maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge. Tests and displays battery condition before charging. Voltage retention test is conducted for 30 minutes during which no charge current is delivered, and provides results indicating the battery's general state of health. The 12-hour MAINTENANCE CHARGE CYCLE consists of 30-minute float charge periods at a voltage of 13.6V followed by and alternating with a 30-minute "rest" (no charge current) periods. Includes permanent ringlet connector with weatherproof cap and a set of battery clips.

Choose Package:


$16.95

LCD Digital Voltmeter-Quick Disconnect


Deltran quick-disconnect plug with LCD voltmeter display. Plug this into your Battery Tender, or any SAE cable, to see a LCD display of the battery voltage. Three LED lights indicate the state of charge as well. Easily unplug it whenever you need to get the charger hooked back up!

Choose Package:


12V LED Flashlight/Charging System Indicator


This great little 6-LED flashlight goes right into your SAE battery charging socket for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. All with a 40 inch cord so you can see in those out of the way places when you need to.

Don't have a cable from your battery? Well, select the package and we will include a cable that goes from your battery to a SAE type connector to plug in your light or charge your battery when at home. This is a fused circuit to protect your battery.


$18.95

LED Taillight/Brake Light Bulb (1157 Type)


A LED Taillight/Brake Light bulb uses considerably less energy than a standard filament type bulb. LED brake light will draw approximately 1 watt while a filament type draws in excess of 15 watts! This means less power draw from batteries on total loss systems and additional power for accessories on regular systems.

Optional Add on:

$79.95

New! 11082017

Tuff Lites Flexible LED Turn Signals

Sold in pairs
>Tuff Lites Flexible LED Turn Signals

They're back at last! The new folks at Extreme Dual Sport are now making the Tuff Lites again. The unique feature is a metal spring in the Tuff Lite stalk to allow it to bend a long way in any direction without breaking.

  • Flexible stalk, 180 degree deflection with no fatigue
  • Ultra tough housing and lens
  • All weather

LED turn signals require an LED flasher. Diode kit is required for bikes with a single turn signal indicator on the dash. More Info

Optional Add on:


$29.95

"Crash Advantage" LED Turn Signals

Sold in pairs

These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long!

LED turn signals require an LED flasher. Diode kit is required for bikes with a single turn signal indicator on the dash.

Select Mount Type:


$49.95

RAM Cell Phone Mount


click to enlarge

A complete kit to mount your phone (or other electronic device) to your motorcycle. The cradle expands from 2.25" to 3.25" wide and 4.75" to 6.25" tall. The width is adjustable but fixed while the upper portion of the cradle is spring loaded to keep your device secured in the roughest conditions.

Mirror mount style mounts between your mirror and perch. Simply remove your mirror, place the plate between your mirror and the perch and tighten it down.

The handlebar mount kit allows you to mount to either a 7/8" or 1-1/8" bar. Also includes hardware to mount to the back of a lever perch.

Include Power Port:


Select Charging Cable:


Weatherproof USB Charging System


click to enlarge

This compact, easy to mount, all weather USB Power Port is the answer for powering and charging your USB devices including cell phones, smart phones, most GPS units, MP3 players and some digital cameras.

Power port connects from battery to handlebars using included universal mount.

Select the correct charging cable for your application by clicking on "More Information".

click to enlarge click to enlarge
  • 18" power port and charging cables
  • Input Voltage: 12V ± 4.0V
  • Output Voltage: 5V ±.25V
  • Output Current: 1A Max
  • 3BR Powersports Universal Mounting System
  • Powers Garmin GPS as well as most cell phones and any other device that charges using 1A or less of USB power

Red Band USB Smart phone Quick-Charge Cables (Micro style connector)looks like standard USB data cables but have the built-in ability to signal smart phones such as Android or Windows to charge at full rate when plugged into any "dumb" charger such as car chargers, wall adapters or 3BR Powersports TAPP series of all-weather USB power ports. Charging at full rate can reduce the charging time by as much as two hours and will easily keep up with power hungry applications such as GPS or video.

Red Band GPS Power cables (Mini style connector) enable Garmin Nuvi GPS to navigate when plugged into a generic USB power port. Garmin Nuvi uses the cable to determine which mode, navigate or data, the GPS should be operating in. Using a standard USB data cable to power a Garmin Nuvi will cause it to go into data mode for transferring maps, route/track data, pictures etc. The Garmin factory power cable is used to enable navigation mode. However, the Garmin power cable is unsatisfactory for powersports applications as it is not weatherproof, is way too long and is only supplied with a cigarette lighter-type of plug. The 3BR Powersports Red Band GPS power cable looks like a standard USB power cable with a USB Type A plug on the source end but it has internal circuitry to make it appear to the GPS as a Garmin power cable. The USB Type A plug allows powering the GPS from any generic USB port and allows use of 3BR Powersports power port cables for full all-weather protection.

Choose Package:

Optional Add On:

Panel Mount SAE Socket


OptiMATE Cable O-20
OptiMATE Cable O-20

The Optimate Cable O-20 is a SAE weatherproof bulkhead/panel mount power source. Main body fits a 1" dia. hole. With space in the dash area of the DR kind of limited, we offer an optional stainless steel bracket that will bolt to your handlebar clamp, making for a clean and easy installation. Overall length of the unit is 12" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors.

Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead for when you don't have something plugged in. Unit has a 3-year limited warranty.

Don't have a cable back to your battery? Then select the package that includes that as well.

Lower image shows the mount side with the optional Mounting Bracket installed.

Choose Package:

OptiMate Cable O-40


OptiMATE Cable O-40

The OptiMate Cable O-40 is a SAE to SAE weatherproof bulkhead/panel mount. Main body fits a 18mm (23/32") hole. Overall length of the unit is 40" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors.

Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead when you don't have something plugged in. Unit has a 3-year limited warranty.

Don't have a cable back to your battery? Then select the package that includes that as well.

Choose Package:


USB Device Charger


This mini USB device connects to a battery cable with a SAE connector just like the typical Battery Tender outlet and allows you to charge your iPad, iPod, iPhone, GPS unit, camera or Smart phone. Input is 12 Volts, output to the USB port is 2.1A maximum, perfect for your phone or low or other USB devices.

Body & Frame

Back to Top
Select Seat

$174.95

Seat Concepts Foam & Cover Kit

DR200/SE '89-'14 (Made in USA)

Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points. Each individual seat model was specially designed to increase comfort without compromising rideability.

Default foam density is 160-250lbs. Softer or firmer foam available on request for no extra fee

Please allow 1-2 weeks for delivery of Stardard Seat. Gripper Top/Carbon Fiber Sides and All Black Vinyl may take longer.

$112.95

AirHawk Seat Cushion


So you're not ready to dish out the money for a new seat but you can't stand to sit on the stocker for more than 50 miles. The Air Hawk might be the answer.

  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
Choose Tint:

$78.95

Dual Sport Windscreen


Dual Sport Windscreen Dual Sport Windscreen

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps. Will not fit 1 1/8" oversize handlebars. 14" tall 10" wide.

$99.95

Ricochet Offroad Skid Plate

DR200 All(Made in USA)
  • Made from 4mm thick aircraft aluminum
  • Oil drain hole for easy access
  • All mounting hardware included

$69.95

Sheepskin Seat Cover


This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

Wheels

Back to Top

$109.95

Warp 9 Spoke Torque Wrench



Professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.

Included tip sizes: 5.1, 5.6, 5.8, 6.3, 6.7, 6.9 and Spline drive.

$129.95

Wheel Balancing & Truing Stand


Always wanted to build or true your own wheels? Maybe just be able to balance your wheels after changing tires. This stand is perfect for both of those tasks.

  • Features a bubble level to balance wheels correctly the first time
  • Steel plate construction for durability and stability
  • Comes with shaft, cones and spacers to fit just about any wheel
Select

Wheel Bearing Kits

DR200 All

High quality sealed bearings by Moose Racing. Includes dust seals.

$8.95

Steel Wheel Weights-Silver


Steel wheel weights replace the old lead ones that are no longer legal in some states. Mount up new tires and make sure they are balanced for a smoother ride and longer tire life. This is a sheet of 60, 1/4 oz. weights with adhesive backing.

.

Tires

Back to Top
New! 022018

Check out the Tires page!


Link to Tires page

We've moved all our Tires and Tubes and to a single page to make it easier for you to find exactly what you want. Click here to go to that page and get those tires added to your order!

Tire tools and accesories are located at the bottom of the new Tires page. Click here for Tools and click here for Accessories.

Brakes

Back to Top

Select


EBC Sintered Brake Pads

DR200 All

Sintered Pads from EBC provide great performance in all conditions yet still give you long pad life. Front pads are double H rated for maximum breaking. Rear shoes offer maximum durability and excellent braking performance.

$24.95

Mini Bleeder




Combines wrench and bleeder valve into one convenient and compact tool

  • Fits most 8 mm bleeder nipples
  • Bleeds brake systems and hydraulic clutch systems
  • Internal check valve for fast easy bleeding
  • Anodized billet aluminum handle with chrome moly steel body
  • Compact size for tight spaces
  • High quality internal seal
  • Multi position handle

$26.95

Front Caliper Rebuild Kit

DR200 All

All the parts you need to freshen up your rear brake caliper. New piston seals, slide pin and boots. Fix that sticky or limp rear brake.

$34.95

Front Master Cylinder Rebuild Kit

DR200 All

All the parts you need to freshen up your front brake master cylinder. New piston, seals, return spring, boot and snap ring.

$7.95

Bel-Ray DOT 4 Brake Fluid


Bel-Ray's Super DOT 4 brake fluid is specially formulated to exceed all DOT 3 & DOT 4 specifications. What this means to you is exceptional resistance to vapor lock and maintaining consistent lever feel during hard brake use. This 12 ounce bottle is enough to finish just about any job.

  • Formulated for hydraulic brake systems
  • Mixes with all fluids meeting DOT 3 and DOT 4 specifications
  • Boiling point: dry 446°F, wet 311°F
  • For brake systems and hydraulic clutches, except systems using mineral base fluids

Controls

Back to Top
Select Bar

$41.95

Fly Handlebars


These handlebars are high quality at an affordable price. Several bikes here in the shop use these bars and we like them.

  • 7/8" mounting area, fits stock mounts
  • Manufactured from 6061 T-6 aircraft aluminum
  • Knurled center section and clutch end
  • Bar pad included
  • Reduces rider fatigue by absorbing impact, shock and vibration

  • Different bend dimensions (see diagram for help)
  • CR High - W = 802, H = 99, R = 65, S = 54, B = 13 degree
  • KX/RM - W = 805, H = 93, R = 50, S = 55, B = 14 degree
  • YZ/WR - W = 803, H = 92, R = 56, S = 57, B = 15 degree

$10.95

ProGrip 714 Rally Grips

Our Favorite Grips!

Replacing your handlebars? Time to replace those worn out grips? These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze.

Select Controller

BikeMaster Heated Grips


Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

$19.95

Go Cruise Cruise Control


The Go Cruise cruise control goes over the throttle grip and rests on the brake lever to hold your throttle open allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

$10.95

"Crampbuster" Cruise Assist

(Made in USA)

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but rather a simple clip-on device which allows you to relax your grip while riding.

Choose Bar Size:

$39.95

Warp 9 Handlebar Mounts

(Made in USA)
Warp 9 Handlebar Mounts

Handlebar mounts that replace your stock clamps. These raise your handlebars 1 inch. Choose 7/8" for standard handlebars or 1-1/8" to allow installation your choice of oversize handlebars.

Select Bar Size


$59.95

Powermadd 2" Handlebar Riser


  • 4.75" wide, requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimum bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" or 1 1/8" bars
Choose Color

$94.95

Rox Pro-Offset Elite Block Risers

(Made in USA)
Rox Pro-Offset Elite Block Risers Silver
Rox Pro-Offset Elite Block Risers Black

This unique design from Rox allows you to move your bars either closer or further away 1" depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Select Guards


$129.95

Cycra ProBend Handguards


Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select Color:

$139.95

Acerbis X-Factor Hand guards


New from Acerbis, these hand guards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest we have ever seen.

Works with 7/8" or 1-1/8" bars.


$21.95

Moose Molded Foam Handguards



Riding in the harsh conditions of winter? Good, we are too. These foam hand guards are great. You get the extra protection in bad weather to help keep your hands warm and dry. These just about double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain at bay.

Choose Size:


Doubletake Mirrors

Sold Separately
Enduro Mirror

ADV Mirror

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4" diameter

Ideal for dualsport use, where you want the absolute minimum profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter.

Choose Size:

$47.95

PSR Dualsport Mirrors

Sold Separately
PSR Dualsport Mirrors round PSR Dualsport Mirrors oval

PSR dualsport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter, both on our Dual-Sport page.

Sold each. If you need a set, please order 2.


$22.95

Folding Dualsport Mirror

Sold separately

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price of the KTM part. Fits either left or right side.


$49.95

Bar-End Mirrors

Sold in pairs

Bar end mounted mirrors moves the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards..

$32.95

Mirror Extenders

(Made in USA)

Can't see past your shoulders? These 2.5 inch long mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.

  • 10mm Threads
  • Sold in pairs
Mirror Extenders

$39.95

Steering Head Bearing Kit

DR200/SE '96-Current

Tapered roller bearings provide decreased maintenance, less wear, smoother operation and longer life. This set of high quality replacement steering stem bearings include:

  • Upper and lower tapered bearings
  • Upper and lower bearing races
  • Upper and lower seals

Replacement Levers

DR200/SE '96-Current
Replacement Levers

Order up your new levers here! If you keep breaking levers, you might want to think about a set of handguards to protect them in case of a fall.

19.95

Clutch Cable

DR200/SE '96-Current
click to enlarge

Motion Pro replacement clutch cable.

19.95

Throttle Cable

DR200/SE '96-Current
click to enlarge

OEM throttle cable.

$9.95

Cable Luber


Keep your cables lubed up and working freely. This tool is used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the far end, the cable is lubricated.

$19.95

New! 031017

Motion Pro Cable Luber V3


Motion Pro Cable Luber V3

A new type of cable luber from the tool people at Motion Pro. Designed to seal completely around the cable housing and stop all those messy leaks. Because the unit is closed and sealed before pumping the lube down the cable, your cable gets more lube! A lubed cable is a happy cable!

Keeps things clean and simple. No more lube running down your arm. Works on most cables with a 4mm to 8mm OD housing.

$20.95

Dri Slide Cable Lubricant


Goes on wet but evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, and prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.

Luggage Racks

Back to Top
Select Size/Color:

ROK Straps

The ultimate stretch strap

These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hooks - tie down straps.

ROK Straps are a must have for any dual sport or adventure rider!



ROK Straps are a two-piece strap that has a quick-release buckle in the middle and loops on each end.
One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks
that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around
your frame, rack or other secure point and then back through the loop in the end making for a very secure
mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap
until your load is firmly held in place.

Nomadic Rack


  • CNC laser cut from light weight 1/8" 5052 Aluminum
  • Easy installation, no modifications required
  • Large 12" x 9" surface area
  • Sleek low profile, and lightweight!
  • Rigid 4 point mounting system
  • RotoPax 1 gal or 1.5 gal compatible

Packages available include just the Nomadic Rack, or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container. Select package from dropdown and click 'Add To Order'.

Luggage

Back to Top

Saddlebags & Hard Cases


Choose from a huge selection of sidebags and hard cases from top brands.

  • Wolfman Luggage
  • Nelson-Rigg
  • Giant Loop
  • Moose Racing

Tank Bags


Tank bags provide easy access to personal items and come in a variety sizes, styles, and colors.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop

Duffel Bags


Select from an assortment of sizes, designs, and brands.

  • Wolfman Dry Bags and Rolie's
  • Saddlemen Destination Pack
  • Givi waterproof bags
  • Firstgear Torrent bags

Top Cases


Top cases by Moose Racing allow easy access and transportation of items for long rides or daily commuting.

  • Expedition Aluminum Top Cases are a perfect match for the Expedition Side Cases. Available in 25 or 38 liter sizes
  • Expedition Hard Top Cases are perfect for daily commuting and errands around town. Available in 28 or 47 liter sizes

Fender Bags


No larger image

Fender bags are perfect for carrying tools and tubes on any adventure.

  • Wolfman 1.25 Liter front fender bag
  • Moose Racing removable rear bag
  • Wolfman 3.5 Liter tool bag
  • Chase Harper rear fender pack

Accessories


Luggage accessories to complete your luggage set.

  • RotoPax fuel and water containers
  • ROK Straps
  • Universal Mounting Kits
  • Much more!

Helmets & Apparel

Back to Top

Dual Sport Helmets


We have put together a great list of dual sport helmets for any budget.

  • Arai XD-4 Dual Sport features great quality and looks
  • Shoei Hornet X2 for serious dual sport enthusiasts
  • Bell MX-9 Adventure new for 2015 is everything you want at a great price
  • AFX 41-DS Dual Sport features an inner flip down sun shield
  • Fly Trekker gives great quality and price

Rain Gear


Stay dry with quality rain gear by Frogg Toggs. Frogg toggs is committed to providing the best in affordable, innovative rainwear technology. ToadSkinz technology is a newly developed hybrid fabric that was engineered by the frogg toggs research team. This unique new material has the look and feel of a traditional polyester rain suit but with a non-woven inner layer that provides guaranteed waterproof and windproof performance in a lightweight garment with great breathability.

Gloves


Choose from a great selection of Firstgear dual sport gloves.

  • Ultra Mesh Gloves
  • Kilimanjaro Gloves
  • Kathmandu Gloves
  • Cold Weather Gloves
  • Many More!

Accessories


We have put some common sense dual sport items on our accessories section and will be adding stuff as we find it.

  • Hydration packs by Thor and Moose Racing
  • Backpacks from American Kargo and Moose Racing
  • Neck warmers and High-Vis vests

Dual Sport Apparel


Choose from top of the line jackets, pants and our every own ProCycle T-shirts

  • Kathmandu jacket and pants
  • Urge overkill Jacket
  • Adventure Mesh jacket
  • Firstgear Thermosuit
  • Kilimanjaro jacket
  • And more!

Heated Gear


Stay warm on those long winter rides with top of the line heated gear.

  • First Gear heated clothing features Nickel Alloy heating technology
  • Venture heated gear comes standard with harness and controller
  • Heat Pump Vest and battery powered gloves also available
  • Check out our Seat warmer and Heated grips

Footwear


Our favorite dual sport boots have been tested and approved by the ProCycle staff.

  •  Forma Adventure Boots
  • Icon Raiden DKR Boots
  • Alpinestars Scout Boots
  • Gaerne Balance Oiled boots

Accessories & Tools

Back to Top

Maps and Navigation



Check out our Maps and Navigation page! Here is where you can find the latest and greatest in GPS units, fantastic printed maps and pretty much anything you need to get you from here to there and back. Or maybe from here to there and then on to someplace else! Just click here or on the gray button below.

  • Butler Maps
  • Benchmark Maps
  • Delorme Maps
  • Garmin GPS Units

ProCycle NAVIGATOR


Navigation doesn't get any simpler than this. Here is the ProCycle 'binary' Navigator. Don't know which way to turn? Flip the NAVIGATOR and follow your nose. It is guaranteed to lead you somewhere. Probably some place you have never been.

$14.95

JIS Screwdriver Kit


The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws are very easy to strip if you are using a regular Phillips screwdriver.

Here is a little kit that will make removing and replacing JIS screws much easier. A small portable handle with its own collection of 4 various bits, along with 2 each JIS No. 1, No. 2 and No. 3 bits. These will work in any other bit holders you may have and have a slight magnetic end to hold a screw while you start it.

$19.95

Stash Box Locking License Plate Storage



The Stash Box is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, lockable, vehicle styling is unaffected, and easy accessibility.

  • Sized to work with all standard size license plates as well as the current Wisconsin and Ohio plates
  • External Dimensions: 7" x 4" x 1" plus 1" on the width for the lock
  • Made from molded polypropylene
  • Includes all mounting hardware, retention pouch for paper documents, foam insert, lock and two keys

$19.99

New! 051717

Moto Caddy Document Holder

(Made in USA)
Moto Caddy Document Holder
Moto Caddy Document Holder

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go. The Moto Caddy is really two containers in one - the longer side is 4 inches long, good for your paperwork, while the other end has a 1 inch depth, perfect for some emergency coins!

$14.95

 

Super Siphon


Super Siphon

This is a new and improved Super Siphon with a longer and larger hose (1/2" x 6´) makes it even easier to transfer fuel from one bike to another! Simply shake the hose to prime it and get fuel moving. With 6 feet of hose it is no problem to reach whatever needs a bit of your gas. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up and stuff it in your bag and you will be very happy when you need it. And need it you will one day.

$49.95

Snapjack V2 Portable Jack


Version 2 now available. Updated with a new locking pin, wider foot and larger foot pad (and an extra!). The Snapjack is an easy to use, portable, sturdy jack for chain lubricating, cleaning or emergency flat repair. It can lift either rear tire up to 1/2" to allow the removal for flat repair. Includes front brake locking strap and handy carrying bag.


$20.95

Dri Slide Cable Lubricant


Goes on wet but evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, and prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.


$12.95

Feeler Gauges


Dual marked feeler gauges. 32 blades  from .03mm/.001" to 1mm/.040"

Select Kit

Tool Kits


Ready to go tool kits. Just toss it in your bag and hit the road or trail.

Standard Tool Kit (top) includes: Combo wrenches (10mm and 12mm) 8" adjustable wrench, 6-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 13/16"), cable ties, mechanic's wire, WD-40, tire pressure gauge and shop towel all enclosed in a heavyweight nylon shell with YKK zippers. Dimensions: 4" L by 9" W by 1-1/2" H.

Deluxe Tool Kit (middle) includes: Combo wrenches (10mm, 12mm and 14mm) 8" adjustable wrench, 6-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 13/16"), spark plug gap gauge, locking pliers, flashlight, electrical tape, cable ties, mechanic's wire, WD-40, tire pressure gauge and shop towel all enclosed in a heavyweight nylon shell with YKK zippers. Dimensions: 6" L by 9" W by 1-1/2" H.

Fanny Pack Tool Kit (bottom) includes: Combo wrenches (10mm and 12mm), 8" adjustable wrench, T-Handle PackWrench (8mm, 10mm and 12mm), Hex Key Set (4mm, 5mm and 6mm), 4-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 13/16"), locking pliers, needle nose pliers, 22mm Axle Hex Adapter, electrical tape, cable ties, mechanic's wire, 2 tire levers, tire pressure gauge and shop towel. All of these tools are in a 5040-denier nylon fanny pack designed to handle heavy abuse on the trails. Dimensions: 7" L by 10" W by 1-1/2" H.


$12.95

Anti-Seize


A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.

$36.95

Smart Caps


Ride-On offers riders a first-class Tire Pressure Monitoring System known as an LED Smart Cap.

A blinking red light on the Smart Cap indicates a loss of 4 PSI or more. Has a 3 year battery life.

If you purchase a 2-pack motorcycle pack you will enjoy FREE Ride-On LED Smart Cap Roadside Assistance (for public roads only). You will find detailed information on this FREE service on Ride-On's website. Click here to read more from their website.


$17.95

Warp 9 Valve Stem Puller Tool



This ultra-cool little tool is used to pull the valve stem through the hole on motorcycle rims saving your finger tips when changing tires, fixing flats or any time the tube has to come out of the rim. It threads inside the valve stem making it easier to pull through the rim hole. You can use it as a valve stem puller, valve core removal tool or a tire deflator.

Handle is CNC machined and has a threaded hole in each end, one to hold and protect the threaded end of the tool and one for a spare valve core (not included). Anodized blue for good looks and corrosion resistance.


$29.95

Tire Bead Breaker


Changing tubes or tires without the right tools can be a real chore. Don't fight your snug beads any longer, use this 27" long tool that opens to 7-3/4" to provide the leverage you need to easily break your tire bead. Constructed from heavy-duty steel with comfortable no-slip grips, this tool makes the job a snap.

$59.95

"Tread Doctor" Knobby Cutting Tool


Refresh your front or rear tire instead of throwing them out! Tread Doctor Lightweight heated tool lets you quickly cut new edges into your dull worn out knobby tires.


$35.95

Mini-Morph Pump


The Mini-Morph is actually a bicycle pump, but is probably the best compact pump we have found for adventure / dual-sport riding. It has a fold-out foot and handle as well as a 4 inch hose so you can set it on the ground to pump! This thing is small enough to stow away in any bag and go totally unnoticed until you need to add air after a flat or just pumping your pressures back up after some serious off-road action.

 

 

$8.95

Motul C5 Chain Paste


A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes. Chain Paste is easy to carry with you on those long trips.

  

$16.95

Chain Breaker Tool


Here is a tool to help you remove a few links from a chain that is too long to fit your bike. A great tool to have in your tool box.

! Note! The head of the pivot pin you are going to remove must be ground or filed down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!


$28.99

Trimax Rotor⁄Disk Lock


This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.

Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.


$12.95

Moto Wash

1 Liter

Moto Wash is a powerful cleaner and degreaser made by Motul. Safe on all paint, metallic components and plastics. Leaves a corrosion resistant film.

$19.95

New! 081517

BrakeFix Parking Brake


BrakeFix

Simply slap this baby over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock black portion down. Takes all of about 5 seconds. Viola! A locked front brake making parking safe and secure.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

$34.95

Noise Isolating Earbuds


click to enlarge

These lightweight ear buds function just like any other set of ear buds, yet make a much better, and more comfortable seal, which helps put the music (or phone, GPS, intercom, etc) where it matters most. The unique earplug design ensures that wind and engine noise is blocked and more sound from your audio device is channeled straight to your ear. They give you a 25dB sound reduction. Save your hearing and hear your tunes.

The low profile allows them to easily fit under your helmet, giving you ear plugs as well as speakers. Total length of wire is 44", enough to reach just about anywhere you need.

$26.95

Helmet Lok



Small and compact enough to fit in your pocket, jacket or on our belt loop, HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point.

Don't be weighed down carrying your helmet around anymore. Just use the simple to operate, carabineer-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy the security and freedom of HelmetLok.

$49.95

Tie-Down Handlebar Clamps



These clever tie-down clamps give you an instant anchor point for tie-down straps using your hand grips.

  • Oval opening for single or double tie-down hooks
  • Clamps securely to any 7/8" handle bar grips
  • Machined from forged aluminum
  • Sold in pairs

$19.95

Deluxe Folding Saw


A must have when blazing new or old trails!

  • Soft rubber handle
  • Thumb latch release for safety
  • 8" blade, 9" folded length
  • Steel frame

$6.95

Cycle Wipes


Cycle Wipes are pre-moistened and pre-folded towelettes made with a special non-woven "Dirt-Grabbing Mesh Fabric," which is a fancy way to say that they are soft, gentle, durable, and a lot safer than that old rag or paper towel.

Their formula contains no harmful ammonia and is specifically formulated for helmet face shields.


$9.95

Cable Luber


Keep your cables lubed up and working freely. This tool is used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the far end, the cable is lubricated.

$19.95

New! 031017

Motion Pro Cable Luber V3


Motion Pro Cable Luber V3

A new type of cable luber from the tool people at Motion Pro. Designed to seal completely around the cable housing and stop all those messy leaks. Because the unit is closed and sealed before pumping the lube down the cable, your cable gets more lube! A lubed cable is a happy cable!

Keeps things clean and simple. No more lube running down your arm. Works on most cables with a 4mm to 8mm OD housing.


$25.95

Clutch Holding Tool


clutch tool

Clutch holding tool

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. From Motion Pro

$14.95

ThumbDogs


click to enlarge

These simple add-ons stretch and grip to the finger of your favorite glove using Grrprr technology. Users can operate a phone or any touch screen device and never have to remove their nice warm gloves.

A special conductive material enables you to interact with capacitive touch screens quickly and easily. There are two ThumbDogs to each package so you can double digit type just like you would in the real world. You can also put one on your index finger to operate your GPS.

$44.95

MotoPressor Pocket Pump


The MotoPressor is a compact pump unit that weighs only 1.5 pounds and fits in the palm of your hand. MotoPressor very cleverly omitted the plastic housing you find on other pumps. This makes it smaller and easier to carry with you. Included is a 25 inch long inflator hose, with a hands-free lock-down delivery valve. You also get a SAE power cord that attaches to your battery and stays there. The Pocket Pump has an 8.5 foot cord to give your air supply plenty of reach. All this packs into a heavy duty neoprene pouch.

MotoPressor will pump the front or rear tire of your motorcycle from flat to approximately 30 psi in 2 minutes and is capable of pumping to over 100 psi. Use it to inflate tires, top off your air shocks, air forks, inflate air beds or anything else.

If you will use the MotoPressor on a CANbus BMW please click on the More Information button.

! Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery and bypasses the motorcycle's electrical CANbus system. The CANbus monitors and limits the amperage of the accessory outlet. When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working. It is not the fault of the Motopressor.

If you have a CANbus equipped bike and you are not SURE about using the accessory outlet, use the alligator clips to get power from your battery or better still connect the supplied SAE terminal connectors to your battery and get power from there.


$33.95

Mini Air Compressor


Portable 12v compressor is perfect for any tool kit. This unit weighs in at only 14oz and measures just 4"x2"x6".

Features a built in LED light and 0-120 psi gauge

• Comes with everything shown


$17.95

Tirepro Digital Tire Gauge


  • Large display, readings are shown to 0.1 psi
  • Kpa and Kg-cm2 scales also provided
  • Reads up to 99 psi
  • Ergonomic shape fits nicely in your hand

$8.95

Rim Protectors


Protect your wheels from scratches and dings caused by tire changing tools

Includes retrieval cord for easy use


$13.95

The Grunge Brush


Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes

$19.95

Master Link Pliers


Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.


$38.95

WPS safety pliers


6" wire twisting pliers with return spring mechanism for easy, safety wire twisting

•  Comes with 25' of .032 stainless steel wire


$5.95

Motul M4 Hands Clean


A handy addition to the tool box or in your traveling pack. This is amazing stuff! Rub a little bit of the paste onto your dirty hands and it lifts the dirt right off. A little more rubbing turns it into dry flakes that brush away. M4 Hands Clean is not messy or greasy.


$12.95

Tow Strap


When you need the Buddy Tow, it's priceless! This is the only tow strap made expressly for motorcycles and ATVs. Tucked away in its carrying case attached to you handlebar or crossbar, the Buddy Tow is always ready when you need it.

This simple accessory - 12' of 1785 lb. test strength 1" webbing in a handy carry pouch should be a standard part of every rider's kit. Whether used to tie your bike down in a truck or ferry boat's car deck, tow a friend into the nearest gas supply or hold down a tent the Buddy Tow has endless uses.


$19.95

Waterproof First Aid Kit


 

Kwik Tek waterproof first aid kit is the perfect size for your "Don't leave home without it" list.

$99.95

Rigid Halo LED Flashlight


This is not just a flashlight, but a tool - seriously. With 800 lumens using just 10W, it can go for almost 3 hours using a single rechargeable AA battery. 1000' of visibility means that this could be used as a signaling device in an emergency and in fact has a setting that emits SOS strobe in Morse Code. There are 5 different settings:

  • High mode – 800 lumens
  • Medium mode – 500 lumens
  • Low mode – 200 lumens
  • Strobe light
  • SOS Strobe in Morse Code

Package includes black anodized flashlight, AA rechargeable battery and charger. With a beam like this, a SOS strode, you can't live without this. Good for rides, camping, just about anywhere.

$9.95

Tiedown Strap Rings

(Made in USA)
  • Constructed of stainless steel and is break-rated at 2,000 lbs. Far exceeds all other tie-down hooks or carabineers on the market
  • Attach tie-downs almost anywhere there is an 8mm bolt
  • Originally designed to give you a place to attach tie-downs to the triple clamp of a dirt bike but there are many other uses, such as bungee attachment points or in the bed of a truck or trailer, behind passenger peg bolts on a street bike or anywhere you can put a bolt.
  • Eye is large enough to accept the large size 3/8 in. coated tie-down hooks as well as carabineers
  • Packaged in pairs

$17.95

Wizards Mystic Spray Wax


  • Synthetic spray wax technology
  • Outstanding gloss, clarity, depth, and slickness
  • Use on any hard surface including plastics, rubber, glass, chrome, paint, and fiberglass
  • Fills minor scratches and cob-webbing
Didn't find what you are looking for?
We have millions of parts and accessories not listed on our site available from our vendors.