Engine

Back to Top

$33.95

Hi-Flo Oil Filter Value 10-Pack

CRF250L

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

You pay $3.40 per filter with our value 10-pack!

$11.95

Magnetic Drain Plug

CRF250L

Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine.

$5.95

Drain Plug Washers


A 10-pack of drain plug sealing washers. Replace your sealing washer at every oil change to prevent an oil leak.

$39.95

Billet Block Off Plate

CRF250L

The most accurate way to tune your bike on the Dyno, the Driven Racing Engine Block-Off Plate is a trouble-free way to eliminate unwanted air leaks.

  • Made from 6061 T-8 billet aluminum
  • Easily removes excess weight from your motorcycle
  • Comes complete with detailed instructions and an airbox cap

$118.95

Complete Gasket Kit

CRF250L

Includes all necessary top quality gaskets, and seals for engine rebuilds.

  • Meet or exceed OEM specifications
  • Highest quality materials
  • Rubber coated spring steel head gasket, and soft steel base gasket

$83.95

Top End Gasket Kit

CRF250L

Includes all necessary top quality gaskets for top end rebuilds.

  • Meet or exceed OEM specifications
  • Highest quality materials
  • Rubber coated spring steel head gasket, and soft steel base gasket
  • Includes valve cover gasket

Select Parts




Engine Gaskets

CRF250L
Engine Gaskets

Individual gaskets for servicing your bike.

$127.95

Radiator Hose Kit

CRF250L
Radiator Hose Kit

Manufactured by Samco Sport UK - the world leader in silicone hose, with over 20 years experience

  • Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
  • Used by leading MX/Enduro and Off-road teams
  • Kit contains hoses and necessary clamps

$44.95

Thermostat

CRF250L
Thermostat

Genuine Honda replacement thermostat

$58.95

Oil Filter Cover

CRF250L
Oil Filter Cover
  • CNC machined aluminum oil filter covers
  • Made of A7009-T6 aluminum with a beautiful anodized finish
  • Lighter than stock oil filter covers

$16.95

NGK Iridium Spark Plug

CRF250L
NGK Iridium Spark Plug

Laser Iridium spark plugs provide superior ignition and long service life. Smallest tip diameter ensures slow wear rate providing stable idle, superior anti-fouling, improved fuel efficiency and lower emissions.

$18.95

Barnett HD Clutch Springs

CRF250L
Barnett HD Clutch Springs

Since 1948, Barnett clutch springs have been made from the finest materials available. Heavy duty Barnett clutch springs are pre-set, shot-peened, and heat treated for performance and durability.

$105.95

OEM Clutch Kit

CRF250L
OEM Clutch Kit

Includes genuine Honda friction plates, drive plates, and clutch springs.

$75.95

ProCycle Clutch Kit

CRF250L
ProCycle Clutch Kit

Our kit includes 5 EBC friction plates which eliminates the judder spring assembly by replacing it with a 5th friction plate.

HD clutch springs by Barnett are included it this kit which will significantly decrease wear under hard conditions.

$79.95

HotCams Shim Kit

CRF250L
HotCams Shim Kit

We all know how important valve train maintenance is on this high rev 4-stroke machines. Shims are a must to keep the valves adjusted.

Kit includes: three 7.48mm OD valve shims of each size from 1.20 to 3.50mm in .05 increments.

$69.95

Honda Service Manual

CRF250L
Honda Service Manual

Genuine Honda Factory Service Manual specifically for your CRF250L

$29.95

Evans Waterless Coolant


Evans Waterless Coolant

Evans Waterless Coolant (EWC) can be used for all water cooled motorcycles to eliminate overheating. With a boiling point in excess of 375° F, it will not vaporize, thus eliminating overheating, boil-over and after-boil. At the other end of the spectrum, EWC freezes below -40° F.

EWC also delivers more power by eliminating pre-ignition and detonation caused by overheating improving combustion efficiency. It also generates very low vapor pressures which reduces strain on cooling system components. EWC comes in 1/2 gal. containers.

Installation requires just a bit more than dumping the old fluid and adding the EWC. Please click on the 'Instructions' button below to see those directions.

Evans Waterless Coolant Installation Instructions

When converting an engine from a water-based coolant to Evans Waterless Coolant (EWC), great care should be given during the installation (conversion) process to insure that all of the old water-based coolant is removed before installing new EWC.

There are a number of methods to use depending on the machine layout and ones mechanical abilities. If you are not comfortable with removing your thermostat and working on the entire cooling system, it is acceptable to drain your system as best as possible, and follow the instructions below.

  • Begin with a cold engine.
  • All of the old antifreeze must be removed from the cooling system. Conventional antifreeze contains water and water contaminates. DO NOT flush with water. (If the system is badly corroded or contaminated with non-coolant products [i.e. rust, oil, dirt, etc.], you may flush with water and use a chemical cooling system cleaner. More care will be needed to ensure that all the water is then fully removed.)
  • Drain cooling system including expansion tank according to the owner's manual.
  • If possible, remove a low hose connection, typically at the coolant pump, and blow air in through the radiator or system-fill opening to push out all the old antifreeze. A high-volume air source is preferred over high pressure air. If compressed air is used to help remove the old coolant and water, be aware that it can damage cooling system components. The use of high volume, low pressure air is preferred because it is safer, and in most cases, more effective.
  • Close up drains, attach any hoses that were removed, and fill system fully with EWC. Run engine until thermostat opens and fluid is circulated thoroughly. Allow engine to cool to relieve any possible water vapor pressure.
  • Drain system and blow out as well as you can again.
  • Close up drains, attach hoses, and fill system with EWC. Fill expansion tank to cold line. Check fluid level after initial operation.

Dispose of drained fluid responsibly. Treat EWC the same as antifreeze for disposal purposes.

EWC expands 7% at operating temperature, about the same as antifreeze. If there is no expansion tank on the system, the radiator will purge a small amount upon warm up. Once cooled, this is now the system's operating level.

EWC is a blend of glycols and so it is compatible with the chemicals in antifreeze so that if you must add water to your system in the case of an emergency, the mixture will perform the same as antifreeze and no worse.

$19.95

Hi Pressure Radiator Cap


Hi Pressure Radiator Cap

The higher pressure in the radiator raises the coolant boiling point and increases protection from coolant loss due to overheating.

23 PSI - 1.6 Bar

Fuel Systems

Back to Top

$329.95

FMF EFI Programmer

CRF250L
FMF EFI Programmer
  • Pre-programmed with best settings to compliment FMF exhausts
  • Stand alone programming capability if needed - no laptop or extra device needed
  • OEM. type connectors for plug-n-play capability
  • Detailed yet easy to understand installation and tuning instructions included

$225.00

EJK EFI Programmer

CRF250L
EJK EFI Programmer

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

$224.95

JD EFI Programmer

CRF250L
JD EFI Programmer

Dyno and field tested, the Power Surge 6X will allow correction for humidity, temperature, air pressure, along with race fuels and motor modifications. The tuner adjusts in a matter of seconds in 6 zones, including an accelerator pump feature for more throttle snap response. The tuner can add or subtract fuel from the injection system. Conditions like rich or lean running, and stalling from flame-out at low revs can be corrected.

$14.95

K&N Filter Care Kit

For K&N filters only
K&N Filter Care Kit

A six step maintenance system designed to recharge any K&N air filter

  • Completely restores airflow efficiency
  • Kit includes filter oil, and filter cleaner

$73.95

K&N Air Filter

CRF250L
K&N Air Filter
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Easily fits inside the factory air box
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike

$16.95

Honda Replacement Air Filter

CRF250L
Honda Replacement Air Filter

Genuine Honda replacement air filter.

$12.95

Filtered Air Vents

Sold in 6 packs
Filtered Air Vents

For use with an EFI programmer. More air flow allows you to add more fuel to your intake mixture, increasing performance.

$7.95

Star Tron Fuel Stabilizer


Star Tron Fuel Stabilizer

Stabilizes gas for short and long term periods of inactivity (up to two years) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. 8 oz bottle treats 48 gallons of fuel.

  • Cures and prevents ethanol fuel problems
  • Helps prevent phase separation
  • Makes engines start easily, run smooth

Drivetrain

Back to Top

Front $11.95 - $14.95

Rear $30.95 - $33.95


JT 520 Steel Sprockets

CRF250L
JT 520 Steel Sprockets

JT Sprockets is the world's leading manufacturer of aftermarket sprockets, constantly raising the industry's standards for quality and service. JT Sprockets are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.

! 40T sprockets are custom made to order. Allow 2-3 weeks for delivery. No returns on 40T sprockets.

Select Type:

520 Master Links


520 Master Links

Always carry a spare master link when out on the trail.


Important! Master links are not interchangeable. Be sure to get the manufacturer and series off your current chain.

$35.95

Axle Blocks

CRF250L
Axle Blocks
  • CNC machined anodized axle blocks
  • Made of A6061-T6 aluminum
  • Rotate using the forward and reverse positions, able to offset axle shaft 13mm in reverse position. (Mini size is 11mm)
  • Scales on both sides of axle block for easy adjusting

$51.95

Billet Aluminum Upper Chain Guard

CRF250L
Billet Aluminum Upper Chain Guard
  • Made of CNC machined A7009-T6 aluminum
  • Finished in anodized titanium-color

$8.95

Motul Chain Paste


Motul Chain PasteMotul Chain Paste

A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes.

$8.95

Renthal Chain Lube


Renthal Chain Lube

Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.

The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.

$16.95

Chain Breaker Tool


Chain Breaker Tool

Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.

Select Chain



$49.95

EK SRO6 520 O-Ring Chain

CRF250L

The SRO series chains offer a value-priced O-ring chain that will not compromise on quality or durability. Features include lightening holes, high-tech heat-treated steel alloys and all the exact same quality and craftsmanship that EK puts into their entire product line

Select the 106 link for stock gearing or 110 link if you are going with a larger rear sprocket. You may have to take a link or two out for the 45 tooth sprocket.

Select Chain



DID Pro VX-Ring 520 Chain

CRF250L
DID Pro VX-Ring 520 Chain

X-Ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-Rings and other makers' modified O-Rings have squashed points that increase friction. The twisting action of the X-Ring disperses the pressure and minimizes power loss.

Select the 106 link for stock gearing or 110 link if you are going with a larger rear sprocket. You may have to take a link or two out for the 45 tooth sprocket.

$49.95

Front Sprocket Cover

CRF250L
Front Sprocket Cover
  • CNC machined front sprocket cover
  • Designed to keep mud out of the front sprocket area
  • Made of A7009-T6 aluminum

$43.95

Moose Racing Billet Aluminum Chain Guard

(Made in USA)
Moose Racing Billet Aluminum Chain Guard

Aircraft aluminum withstands hard hits from logs and rocks. All mounting hardware and wear blocks included.

$45.95

Billet Aluminum Lower Chain Guard

CRF250L
Billet Aluminum Lower Chain Guard
  • Made of CNC machined A7009-T6 aluminum
  • Finished in anodized titanium-color
  • Simple bolt-on application

$19.95

Master Link Pliers


Master Link Pliers

Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.

$13.95

The Grunge Brush


The Grunge Brush

Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes

$12.95

360° Chain Brush


360° Chain Brush

This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance of the chain, the sprockets and the engine. This brush will fit any 400 or 500 series chains.

Suspension

Back to Top

$769.95

Race Tech G3-S Custom Series Shock

CRF250L (Made in USA)
Race Tech G3-S Custom Series Shock

Because the stock shock is non-rebuildable and offers insufficient adjustment, Race Tech has built a bolt on replacement shock to cure an under sprung and under-damped stock setup.

Race Tech's G3-S Custom Series Shocks are truly custom with spring rates and valving picked specific to each rider. Each shock is built to order featuring Gold Valves to guarantee a plush feel and great bottoming resistance while also providing more traction than any other setup on the market.

Please include your riding weight, skill level, and type of riding in the order comments.

$85.95

Pivot Works Shock Linkage Bearing Kit

CRF250L
Pivot Works Shock Linkage Bearing Kit

Replace those worn out shock link bearings and seals. One kits has all you need to get the job done right. Restores your linkage to new condition for better suspension control and smoother action.

$66.95

Pivot Works Swingarm Bearing Kit

CRF250L
Pivot Works Swingarm Bearing Kit

Replace those worn-out and high-priced stock Honda CRF swingarm bearings with the Pivot Works Swing Arm Bearing Kit. Completely restores steering and braking control and includes bearings, pins, collars and seals.

$135.95

Kouba Lowering Link

CRF250L
Kouba Lowering Link

Kouba lowering link will lower the rear 1.75". Comes with bearings and seals installed for a quick and easy installation. Instructions included.

$19.95

Fork Seal Skins


Fork Seal Skins

Helps protect vulnerable fork tube and seal from dust, dirt, and corrosive elements. Hook & loop (Velcro) fastening on back side makes installation or removal for cleaning a breeze.

$34.99

Race Tech's Motorcycle Suspension Bible


Race Tech's Motorcycle Suspension Bible

Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.

The three forces of suspension, testing procedures, even the black arts of chassis geometry: Thede explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.

$110.95

Race Tech Fork Spring Upgrade Kit

CRF250L (Made in USA)
Race Tech Fork Spring Upgrade Kit

In stock form, the forks, featuring a single spring design are under sprung for any rider over 100 pounds. With limited travel, adding a stiffer spring in the right leg only per the stock design was not a viable option.

Race Tech instead offers a Hi-Performance Spring Kit that adds a stiffer spring to the other fork. (The overall spring rate in the forks is the average spring rate between both legs.) This upgrade will make a drastic improvement in handling for most riders.

$165.95

Race Tech Gold Valve Fork Kit

CRF250L
Race Tech Gold Valve Fork Kit

Race Tech's original bolt-on fork valving system for cartridge forks. Triples the flow area by putting valving control on the shim stack instead of the overly restricted stock piston. Outstanding tunability, improved control, traction, plushness and bottoming resistance.

$71.95

Pivot Works Fork Rebuild Kit

CRF250L
Pivot Works Fork Rebuild Kit

Includes all components needed to rebuild you forks.

  • Inner and outer bushings
  • Oil and dust seals
  • All necessary o-rings

$27.95

Fork Seal Kit

CRF250L
Fork Seal Kit

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.

$44.95

Fork Seal Driver

CRF250L
Fork Seal Driver

Innovative design makes tool easier and more secure to use than old fashioned pin-aligned drivers. Image shows a standard fork, but rest assured this driver is for your 43mm upside down forks.

  • Knurled anodized aluminum locking ring
  • Perfectly weighted to drive seals
  • Carbon steel body halves

$19.95

Fork Oil Level Gauge


Fork Oil Level Gauge

Having the proper fork oil level is imperative to the handling of your bike. Setting the correct fork oil level is a snap with this fully adjustable gauge. The adjustable aluminum level plate can be set from 0 to 295mm. The oil reservoir has single milliliter markings up to 60ml.

Being able to accurately tune your forks by adjusting the oil level can make them better resist brake dive or bottoming. Oil level should be thought of as a fine tuning method to make your choice of spring rate work perfectly for your bike.

Exhaust

Back to Top

$385.95

FMF Q4 Hex Slip-On Muffler

CRF250L (Made in USA)
FMF Q4 Hex Slip-On Muffler

The FMF Q4 has always been in a league of its' own and the latest Q4 HEX is the most significant upgrade to date. You don't need to settle for a plugged up moto muffler hampered by an insert when you can have a compliant muffler engineered for performance.

  • Power gains throughout the entire rpm range
  • Pounds lighter than stock
  • Spark arrestor included

$197.95

FMF PowerBomb Headpipe

CRF250L (Made in USA)
FMF PowerBomb Headpipe

The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%!

$32.95

Stainless Steel Heat Shield


Stainless Steel Heat Shield

This universal heat shield provides great looks at a great price.

  • Fits all 1-1/2" - 2-1/8" Pipes
  • Measures 7-1/4" x 3"

$34.95

FMF Heat Shield

(Made in USA)

Have you lost your stock heat shield, or need one on an aftermarket head pipe? FMF makes this nice unit that includes clamps, heat shield with the FMF logo and button head screws to hold it on.

$31.95

Universal Stainless Repack Kit

(Made in USA)

Re-pack your silencer with this pro-quality, three layer packing system and restore the power you have blown out.

Kit includes:

  • 60"x20"x1⁄4" glass mat.
  • 7"x20" stainless wool
  • 8"x20" stainless mesh
  • Twelve 3⁄16" rivets

$384.95

Leo Vince Evo II Slip On

CRF250L

The Evo II has that distinct LeoVince performance sound and is designed to enhance your bike's performance throughout the entire RPM range. This is a premium designed exhaust and offers all the benefits of LeoVince engineering and design at a consumer friendly price point.

  • Weight savings with Stainless Steel Exhaust: 6.2lbs
  • Slip-ons boost horsepower across RPM range
  • Machine-specific tuning to work with stock fuel settings

$325.95

FMF Powercore 4.1 Muffler

CRF250L (Made in USA)

When designing the PowerCore4, FMF looked at their top of the line products to deliver race-inspired performance at an economical price. The end result is a quality muffler with improved torque, increased horsepower and rugged durability all at a price that won't break the bank

$272.95

FMF MegaBomb Headpipe

CRF250L (Made in USA)

The science behind the MegaBomb header may be our greatest engineering accomplishment to date. You can bolt on a Mega bomb with an existing FMF Racing slip on for as much as a 3hp boost, plus the Mega bomb actually reduces noise levels by as much as 1.5dB.

$37.95

Quiet Insert for Powercore 4

CRF250L (Made in USA)

The Quiet Insert will shush up the sound level of the Powercore 4 from about 99db down to about 96db.

$7.95

Muffler Joint Gasket

CRF250L

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but the all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.

$4.95

Exhaust Gasket

CRF250L

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.

Lighting & Electrical

Back to Top
Select Model

$139.95

Vapor Speedometer / Tachometer

CRF250L

Vapor's large digital tachometer bar graph is easy to read and understand. This digital gauge has many useful features including speed, RPM, engine temperature, adjustable distance, stopwatch and odometer. Vapor also features two LED indicators for customizable shift indicators and engine temperature warning.

Includes mounting hardware, speed sensor, magnet kit & temperature sensor.

$54.95

Trail Tech Vapor Indicator Dashboard


Hitting the streets? The Indicator Dashboard gives you what you need to get your dash street legal, from high beam, turn signals, oil, and beyond. With eight different indicators included, customize your dashboard your own way. Attaches to Trail Tech Vapor/Striker and installs easily on the triple clamp of most motorcycles.

Includes eight indicator lights for customization: low beam, high beam, turn arrow left, turn arrow right, turn arrow left and right (hazard), oil, Neutral, and Reverse.

Choose Package:

Micro-Start Portable Jump Start and Power Supply




A device that you can keep in your fanny-pack, backpack or even pocket that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices.

  • XP-1 is 6" x 2 7/8" x1" 14oz.
  • XP-3 is 5" x 2 7/8" x 1" 12oz.
  • Holds a charge for up to a year.

Review by Dirt Wheels Magazine

XP-1:
  • 200 Amp- 400 Peak Amp
  • 12000 mah Capacity
  • 19V Output Port for Laptops
  • 12V Standard Output Port
  • 5V 2A USB Port
  • Detachable Mini Jumper Clamps
  • 3 power ports: 19v for lap tops, 12v standard output, and a USB 5v output for USB powered devices
  • A Universal Cable with 8 different detachable tips to fit all the different brands of Laptop charging ports (Apple, Acer, Dell, HP, Asus, and more)
  • A Universal Cable for 12v standard plug accessories such as Mobile DVD players and heated gear. (8amp max)
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-1)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-1)
  • Nylon zippered carrying case
XP-3:
  • 200 Amp- 400 Peak Amp
  • 8000mah
  • 5V 2a USB Port
  • Micro-Start XP-3 Unit
  • Detachable Mini Jumper Clamps
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-3)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-3)
  • Nylon zippered carrying case
Choose Package:

Koso Mini 3 Temp/Clock/Volt Gauge


click to enlarge
click to enlarge

This Mini 3 meter was designed to help you monitor basic information before and during a ride. Check the condition of the battery before leaving and the voltage of your system during the ride. The ambient temperature function will give you a good reference about how to dress prior to and what is happening during your trip. Very handy to know if the temperature is near or below freezing. The large clock makes it easy to know if you are on schedule or not.

Dimensions: 2.4" W x 1.2" H x .5" D.

Available for the Mini 3 is a nicely crafted mounting plate that allows you to place your new gauge wherever you like.

$29.95

New! 11616

Fixed Rate Turn Signal Flasher


You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.

The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.

Select Unit

New! 11616

Running Light Adapter


This devices allows any two wire after market LED turn signal indicators to operate as running lights (always on), and will blink on / off when the turn signal switch is activated. It is highly recommended to use this product with the Fixed Rate Turn Signal Flasher. Each package contains one dual adapter, good for operating both turn signals, left and right, with the appropriate kit. Please order the Front kit to turn the FRONT flashers into running lights and the REAR kit to turn the rear flashers into running lights.

Comes with factory connectors to make installation easier by plugging into the factory harness turn signal connectors. Works with any two wire aftermarket LED turn signal indicators.

$0.00

New! 111816

LED Signal Diode Kit


This Diode Kit is only necessary if you have a single indicator for your turn signals. One dash light for both left and right signals (such as on the DR650).

This kit allows power to flow in just one direction from the LED signals to the indicator light regardless of which direction you are signalling.

$37.95

Brake Light Modulator

(Made in USA)

This compact, solid state electronic module converts your ordinary brake light into an attention getting, visual alerting device.

Module causes three short flashes and then stays solid for 3.5 sec, then repeats the cycle for as long the brake is on.

! Not for integrated brake/turn units. Resistor Kit may be required if using an LED bulb.

$109.95

signalMinder


click to enlarge

The signalMinder unit is designed as a plug-in replacement for many Japanese bikes. This unit will automatically cancel your turn signal if you forget to shut it off.

  • Cancels signal at 10, 20 or 30 second intervals
  • Allows you to use turn signals as running lights
  • 4-way hazard option
  • Brake flash option

SM-3 unit is designed as a plug-in replacement for most Honda and some newer European bikes. signalMinder uses a computer chip to cancel the turn signals. There are three selectable time outs: 10, 20, 30 seconds.

RUNNING LIGHT OPTION: By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your bike.

Special Note! For 2009 and up Kawasaki models that have onboard computer diagnostics, or if you have Alarm system that activates turn signals, please select SN-4D harness shown below.


Using the DIP Switch #1, you can keep them off and still have the dual-channel system. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function.


BRAKE FLASH OPTION: will flash the turn signal lamps every time you apply brakes. A short 2 second flash pattern begins with quick flashes then slows down to stay on solid.


BRAKE OVERRIDE OPTION suspends the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing.

$36.95

Battery Tender Jr. 12V Charger


  • Fully automatic two-stage lead-acid battery charger
  • Lightweight, compact size is ideal for those hard-to-reach spots
  • Trickle charger ensures batteries are maintained after charging and always ready to go
  • Ideal for all lead-acid, sealed maintenance-free and gel cell batteries (not recommended for lithium iron batteries such as the Shorai)
  • After full 14.4VDC charge is reached, converts to float charger and monitors battery at 13.2VDC; when voltage drops below 12.6VDC, charger resumes charging back to 14.4VDC
  • Two-color LED indicator (red light = charging; green light = storage)
  • Spark-proof
  • Reverse-polarity protected
  • 12' output cord and quick-connect harness

$64.95

3800 Lumen LED Headlight Bulb-H4


New and improved. Brighter (3800 Lumens), better low/high beam contrast, smaller, lower Kelvin color temperature (5500K), replaceable drivers and easier to install. All of these features and the most reliable LED bulb currently available. It only draws 20 watts.

This bulb fits H4 bases only, has Cree XML2 emitters and is fan cooled for extreme conditions. Further features include vibration proof and water-resistance, even complete submersion.

Choose Kit:

Trail Tech Equinox 60mm LED Light



Trail Tech's 60mm LEDs are perfect for any riding adventure, no matter the conditions. Throwing out over 1,000 lumens brightness at only 10 watts, it is one of the most efficient lights on the market.

Three power modes allow performance at any circumstance, from Hi mode for lighting up the night to Low mode for daytime driving light.

The anodized billet aluminum housing is durable and promotes better heat management. Aluminum reflector with vacuum metal deposition creates the most accurate spot beam.

RAM Light Mounts

For LED Auxiliary Lights

The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. We have 2 types to choose from. The Equinox mount fits Trail Tech Equinox lights or any other light with a 10mm or 3/8" mounting stud. The Solstice mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

Sold individually.

  

$119.95

VisionX Solstice 10 Watt LED Light


Each 10 watt Solstice Solo produces 900 lumens. Roughly equal to a 50 watt halogen bulb. These are the brightest LED off road lamps on the market. The rugged and compact 2" x 2" square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod. Includes stainless steel mounting bracket and waterproof connection. The Elliptical pattern is wide and flat. Sold each.

$49.95

Digital Voltmeter and Bracket


A digital voltmeter that can be mounted almost anywhere thanks to our multi-position stainless steel bracket. This will tell you how your charging system is doing and whether or not you need to turn off the laptop and in-flight movie system for awhile. Completely waterproof and comes with connectors, wires and thorough instructions. We consider this a 'must have' device for riders who use heated riding gear, heated grips, additional lighting, etc.

image image

$73.95

MOTO LED EDGE2 Tail Light Kit

CRF250L
  • Comes with edge tail light, license plate and flasher brackets
  • Compact design for center of gravity for sport riding
  • Tail light bracket is made of steel for extreme durability
  • Special oval bolt hole allows to adjust up and down tail light position
  • Two different flasher holes for both OEM and 8mm flashers

$79.95

Speedo DRD

CRF250L (Made in USA)

The Speedo DRD is required to recalibrate your speedometer and odometer after changing either sprocket size or the rear tire size.

  • Smallest electronic speedometer/odometer calibration device in the world
  • Simple plug-in installation
  • Weather proof design to protect against the elements
Optional Add on:

$79.95

New! 110816

Tuff Lites Flexible LED Turn Signals

Sold in pairs (Made in USA)

They're back at last! The new folks at Extreme Dual Sport are now making the Tuff Lites again. The unique feature is a metal spring in the Tuff Lite stalk to allow it to bend a long way in any direction without breaking.

  • Flexible stalk, 180 degree deflection with no fatigue
  • Ultra tough housing and lens
  • All weather

! LED turn signals require an LED flasher

! Bikes with single dash indicator require a diode kit

Isolater Install Guide
Optional Add on:

$29.95

"Crash Advantage" LED Turn Signals

Sold in pairs

These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long!

! LED turn signals require an LED flasher

! Bikes with single dash indicator require a diode kit

Led Isolator Install Guide

$29.90

Mini Turn Signals

4 Pack

These signals have short rubberized flexible stems and bright mini halogen bulbs.

$65.95

Yuasa 12V Maintenance Free Battery

CRF250L
Yuasa 12V Maintenance Free Battery

Absorbed Glass Mat (AGM) Technology is an advanced battery design that eliminates water loss. Once it's filled with acid, you'll never need to fill it with water or check the acid level.

To remain factory-fresh, the AGM battery is shipped dry along with its own pack of high-gravity acid that's added at the time of installation.

Choose Battery:

Shorai Lithium-Iron Battery

CRF250L

Shorai batteries deliver more energy faster, with less weight and with less wear on the battery per start cycle than any other brand or technology available on the market today.

  • Up to 80 percent lighter than their lead acid equivalents
  • Improved starting performance
  • Does not sulfate while sitting
  • Three year warranty
LFX09L2-BS12
  • Weight 1.27 lbs
  • Amp hours 9
  • CC Amps 135
  • Dimensions: l= 4.45" w= 2.28" h= 3.5"

LFX14L2-BS12
  • Weight 1.46 lbs
  • Amp hours 14
  • CC Amps 210
  • Dimensions: l= 4.45" w= 2.28" h= 3.5"

Self-adhesive foam shims are included and insure a great fit to the battery box, as well as extra vibrational an thermal insulation.

Shorai Batteries require a charging system output of 13.1 Volts or higher at idle, and must not exceed 15.2 volts at maximum output. "Smart" lead-acid chargers with automatic cutoff may be used for periodic charging, but will NOT work as a tender/maintainer and should be disconnected immediately after charge has finished. Older lead chargers without automatic shut-off should never be used. Improper charging is dangerous and will void your warranty. A Shorai BMS Charger - with Store Mode - is highly recommended for anyone who rides less than twice a month. Alternatively, you may disconnect the negative cable from the battery for storage, and charge once per year in that case.

Choose Optimate:



Optimate Battery Maintainers/Chargers


Optimate Battery Maintainers/Chargers

Optimate 1 Global Charger-Maintainer

This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid filler cap / wet cell, sealed AGM (MF) or GEL battery without overcharging. Ideal for vehicles that are seldom or seasonally used, or in storage. Global Three-step charging program ensures effective charging of the battery and is totally safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or battery disconnected. Dust proof case with wall mounts, with 6ft AC supply lead and 6 ft. charge lead ending in SAE connector. Velcro strap slot to hang the charger on handlebar. Weatherproof battery lead & OptiMate battery clip set included.

********************************

Optimate Battery Maintainers/Chargers

Optimate 2 Maintainer

OptiMate 2 senses the battery condition, recharges and then keeps the battery 100% ready. The OptiMate maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Totally safe for vehicle electronics. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. Works with standard filler caps, and sealed maintenance-free units. Includes permanent ringlet connector with weatherproof cap and battery clips. Comes with global input (100-240V).

********************************

Optimate Battery Maintainers/Chargers

Optimate 3 Optimizer

Recovers sulphated batteries and then tests after charging. The maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Diagnoses, recovers, charges, tests and optimally maintains, automatically. Comes with global input (100-240V). For batteries forgotten over the winter, OptiMate 3 will recover them from deep discharge and optimally recharge them. Batteries status can be checked at a glance. OptiMate 3 will then maintain the battery at full charge safely for months at a time and increase life by up to 400%. Works with standard AGM, and gel batteries. Do not use with Lithium batteries.

********************************

Optimate Battery Maintainers/Chargers

Optimate Lithium

OptiMate™ lithium, the first OptiMate to protect your LiFePO4 battery unlike any other charger. Will protect your investment and keep your Lithium Iron Phosphate (LiFePO4/LFP) battery performing as advertised for a very long time. With 5 Amps of charge current available, OptiMate lithium's unique multi-step ampmatic™ program recharges and balances cells within the battery quickly and efficiently. Optimate lithium's maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge. Tests and displays battery condition before charging. Voltage retention test is conducted for 30 minutes during which no charge current is delivered, and provides results indicating the battery's general state of health. The 12-hour MAINTENANCE CHARGE CYCLE consists of 30-minute float charge periods at a voltage of 13.6V followed by and alternating with a 30-minute "rest" (no charge current) periods. Includes permanent ringlet connector with weatherproof cap and a set of battery clips.


$76.95

Shorai Charger


You can charge your Shorai battery with a regular battery charger but if you want the very best for it, this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term long term maintenance storage.

Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.

For Shorai Lithium Iron batteries only

Select Mount Type:


$49.95

RAM Cell Phone Mount


click to enlarge

A complete kit to mount your phone (or other electronic device) to your motorcycle. The cradle expands from 2.25" to 3.25" wide and 4.75" to 6.25" tall. The width is adjustable but fixed while the upper portion of the cradle is spring loaded to keep your device secured in the roughest conditions.

Mirror mount style mounts between your mirror and perch. Simply remove your mirror, place the plate between your mirror and the perch and tighten it down.

The handlebar mount kit allows you to mount to either a 7/8" or 1-1/8" bar. Also includes hardware to mount to the back of a lever perch.

Include Power Port:


Select Charging Cable:


Weatherproof USB Charging System


click to enlarge

This compact, easy to mount, all weather USB Power Port is the answer for powering and charging your USB devices including cell phones, smart phones, most GPS units, MP3 players and some digital cameras.

Power port connects from battery to handlebars using included universal mount.

Select the correct charging cable for your application by clicking on "More Information".

click to enlarge click to enlarge
  • 18" power port and charging cables
  • Input Voltage: 12V ± 4.0V
  • Output Voltage: 5V ±.25V
  • Output Current: 1A Max
  • 3BR Powersports Universal Mounting System
  • Powers Garmin GPS as well as most cell phones and any other device that charges using 1A or less of USB power

Red Band USB Smart phone Quick-Charge Cables (Micro style connector)looks like standard USB data cables but have the built-in ability to signal smart phones such as Android or Windows to charge at full rate when plugged into any "dumb" charger such as car chargers, wall adapters or 3BR Powersports TAPP series of all-weather USB power ports. Charging at full rate can reduce the charging time by as much as two hours and will easily keep up with power hungry applications such as GPS or video.

Red Band GPS Power cables (Mini style connector) enable Garmin Nuvi GPS to navigate when plugged into a generic USB power port. Garmin Nuvi uses the cable to determine which mode, navigate or data, the GPS should be operating in. Using a standard USB data cable to power a Garmin Nuvi will cause it to go into data mode for transferring maps, route/track data, pictures etc. The Garmin factory power cable is used to enable navigation mode. However, the Garmin power cable is unsatisfactory for powersports applications as it is not weatherproof, is way too long and is only supplied with a cigarette lighter-type of plug. The 3BR Powersports Red Band GPS power cable looks like a standard USB power cable with a USB Type A plug on the source end but it has internal circuitry to make it appear to the GPS as a Garmin power cable. The USB Type A plug allows powering the GPS from any generic USB port and allows use of 3BR Powersports power port cables for full all-weather protection.



$14.95

USB Device Charger


This mini USB device connects to a battery cable with a SAE connector just like the typical Battery Tender outlet and allows you to charge your iPad, iPod, iPhone, GPS unit, camera or Smart phone. Input is 12 Volts, output to the USB port is 2.1A maximum, perfect for your phone or low or other USB devices.


$16.95

LCD Digital Voltmeter-Quick Disconnect


Deltran quick-disconnect plug with LCD voltmeter display. Plug this into your Battery Tender, or any SAE cable, to see a LCD display of the battery voltage. Three LED lights indicate the state of charge as well. Easily unplug it whenever you need to get the charger hooked back up!



12V LED Flashlight/Charging System Indicator


This great little 6-LED flashlight goes right into your Battery Tender type plug for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. All with a 40 inch cord so you can see in those out of the way places when you need to.

Don't have a cable from your battery? Well, select the package and we will include a cable that goes from your battery to a SAE type connector to plug in your light or charge your battery when at home. This is a fused circuit to protect your battery.


$18.95

LED Taillight/Brake Light Bulb (1157 Type)


A LED Taillight/Brake Light bulb uses considerably less energy than a standard filament type bulb. LED brake light will draw approximately 1 watt while a filament type draws in excess of 15 watts! This means less power draw from batteries on total loss systems and additional power for accessories on regular systems.

Body & Frame

Back to Top
Select Seat
Cover Options

$174.95

Seat Concepts Foam & Cover Kit

(Made in USA)
Seat Concepts Foam & Cover Kit

Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points. Each individual seat model was specially designed to increase comfort without compromising rideability.

Default foam density is 160-250lbs. Softer or firmer foam available on request for no extra fee

Please allow 1-2 weeks for delivery

Select Color:

$249.95

Acerbis 3.1 Gallon Tank

CRF250L
Acerbis 3.1 Gallon Tank

Acerbis fuel tanks were designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service.

Select Color:

$269.95

IMS 3.1 Gallon Tank

CRF250L

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek

$34.95

New! 032917

Fuel Tank Filter

Fits Acerbis, Clarke and IMS tanks
Fuel Tank Filter

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carb! Created by the filter experts at Twin Air, this filter fits IMS, Clarke and Acerbis gas tanks.

$69.95

Sheepskin Seat Cover


This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

$99.95

AirHawk Seat Cushion


So you're not ready to dish out the money for a new seat but you can't stand to sit on the stocker for more than 50 miles. The Air Hawk might be the answer.

  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included

$79.95

Moose Seat Warmer Kit


click to enlarge

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

Select Screen

$109.95

Bajaworx Rallye Windscreen

CRF250L (Made in USA)
 

Molded using a very durable, lightweight 1/8" thick polycarbonate - giving the windshield a high impact strength and making it shatter-resistant with a superior light transmission quality. Mounts quickly and easily onto the stock headlight cowling for a clean factory look. Drilling of the cowling is required, hardware is included. Removal for trail riding is also quick and easy.

Select Color:

$93.95

New! 030717

Laminar Speed Shield

CRF250L (Made in USA)

 

Laminar Speed Shields are designed to provide lower wind pressure in the chest area to help reduce rider fatigue. Short enough to not be in the way when standing up on the pegs. Mounts directly to the stock headlight cowling with all hardware provided and no drilling required!

$99.95

Ricochet Offroad Skid Plate

CRF250L (Made in USA)
Ricochet Offroad Skid Plate
  • Made from 4mm thick aircraft aluminum
  • Oil drain hole for easy access
  • All mounting hardware included

Select Items


R&G Racing Engine Protection

CRF250L
R&G Racing Engine Protection

Constructed of durable 3mm powder coated aluminum and easily installed utilizing existing mounts, the R&G Bash Plate (center plate) will protect the underside of your motorcycle from damage and debris. Add Case Guards (left and right plates) to your order for complete protection.

$210.95

R&G Racing Engine Protection Kit

CRF250L Both sides included
R&G Racing Engine Protection Kit

Developed on track and brought to the road. R&G engine case covers are made from 4mm polypropylene for strength, durability and looks that compliment

Select Items


R&G Racing Frame and Swingarm Sliders

CRF250L
R&G Racing Frame and Swingarm Sliders
R&G Racing Frame and Swingarm Sliders

Constructed of heavy-duty machined steel, aluminum, and high-density nylon, R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks

R&G "Cotton" Reel Swingarm Spools are oversize paddock stand bobbins that perform double duty as lifting points for hook style paddock stands as well as protection for the swingarm of your motorcycle in the event of crash or drop.

$105.95

Expedition Radiator Guards

CRF250L (Made in USA)
Expedition Radiator Guards
  • Easily installed steel mesh guard to protect your expensive radiator
  • Does not touch the radiator for added protection
  • Minimal air flow restriction
  • No modification required to install

$112.95

Complete Billet Bling Kit

CRF250L
Complete Billet Bling Kit
  • F/R Brake reservoir covers
  • Brake line clamp
  • Oil filler and timing inspection plugs
  • Axle blocks and air valve caps
  • Rim lock nuts and spacers

Wheels

Back to Top
Select Rims:



$1149.95

ProCycle Super Moto Wheels

CRF250L
ProCycle Super Moto Wheels

We start with Excel Takasago, or top of the line Sun rims, OEM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are then precision machined for a perfect match to your bike.

Our pro shop then laces and true's your wheels to perfection, giving you the highest quality set of custom wheels available.

  • New OEM hubs with bearings and seals installed
  • Excel or Sun 3.5" x 17" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add any set of SM tires to your order and we will mount and balance for free! Tubes and rim strips included.

Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

$109.95

Warp 9 Spoke Torque Wrench


Warp 9 Spoke Torque Wrench
Warp 9 Spoke Torque Wrench

Professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.

Included tip sizes: 5.1, 5.6, 5.8, 6.3, 6.7, 6.9 and Spline drive.

$129.95

Wheel Balancing & Truing Stand


Wheel Balancing & Truing Stand

Always wanted to build or true your own wheels? Maybe just be able to balance your wheels after changing tires. This stand is perfect for both of those tasks.

  • Features a bubble level to balance wheels correctly the first time
  • Steel plate construction for durability and stability
  • Comes with shaft, cones and spacers to fit just about any wheel
Select Rim Color:

Select Hub Color:




$919.95

Warp 9 Supermoto Wheels

CRF250L

Warp 9 Supermoto Wheels

Warp 9 Supermoto wheels are built with billet hubs, 7000 series aluminum rims and laced and trued with stainless steel spokes and nipples.

  • 3.5" x 17" front wheel with stock diameter rotor installed
  • 4.25" x 17" rear wheel with rotor and 40T sprocket installed
  • Multiple sprocket sizes available upon request

Add any set of SM tires to your order and we will mount and balance for free! Tubes and rim strips included.

Please allow 1-2 weeks for your custom wheels to be built

Select

Wheel Bearing Kits

CRF250L
Wheel Bearing Kits

High quality sealed bearings by Moose Racing. Includes dust seals.

$8.95

Steel Wheel Weights-Silver


Steel Wheel Weights-Silver

Steel wheel weights replace the old lead ones that are no longer legal in some states. Mount up new tires and make sure they are balanced for a smoother ride and longer tire life. This is a sheet of 60, 1/4 oz. weights with adhesive backing.

.

Tires

Back to Top

Select Size



Heidenau K60 & K60 Scout


Heidenau K60 & K60 Scout

Heidenau tires are made in Germany and despite their short history here in the US, they are quickly becoming synonymous with quality motorcycle tires for street, off road and adventure riding. The Heidenau tires we are most excited to offer are the K60 Scout which are a more aggressive Dual Sport / Off Road tire with a smart tread pattern that will out-perform the TKC80s on pavement and the K76 tire designed for light dual sport riding and confidence building on the street. In addition to offering outstanding tires for adventure riding, Heidenau tires fit the needs of all types of bikes, from Classic/Vintage motorcycles to scooters. Whether at high speeds, cornering, or in wet conditions, Heidenau motorcycle tires strive to fulfill the highest claims of quality

Select Size



Kenda K761


Kenda K761

Kenda's newest dual-sport tire designed for the 80% on-road, 20% off-road crowd.

  • DOT approved
  • Unique combination of street and off-road grip provides maximum performance
  • Strong and durable Nylon four-ply construction
  • The advanced compound design gives better stability, corning traction and braking control
  • Tube type tire H-rated for speeds up to 130 mph

Select Size






Rim Strips


Rim Strips

New tires and tubes deserve new rim strips! Choose the correct size for your machine and toss the old cracked and broken ones.

$36.95

Smart Caps


>Smart Caps

Ride-On offers riders a first-class Tire Pressure Monitoring System known as an LED Smart Cap. The Smart Cap TPMS is an LED tire pressure monitoring device for your bike. It is easy to install and automatically calibrates to the pressure of each individual tire. A blinking red light on the Smart Cap indicates a loss of 4 PSI or more. A yellow light indicates the battery is running low.

If you purchase a 2-pack motorcycle kit you will enjoy FREE Ride-On LED Smart Cap Roadside Assistance (for public roads only). You will find detailed information on this free service on Ride-On's website. Click here to read more from their website.

$17.95

Tirepro Digital Tire Gauge


Tirepro Digital Tire Gauge
  • Large display, readings are shown to 0.1 psi
  • Kpa and Kg-cm2 scales also provided
  • Reads up to 99 psi
  • Ergonomic shape fits nicely in your hand

$29.95

Tire Bead Breaker


Changing tubes or tires without the right tools can be a real chore. Don't fight your snug beads any longer, use this 27" long tool that opens to 7-3/4" to provide the leverage you need to easily break your tire bead. Constructed from heavy-duty steel with comfortable no-slip grips, this tool makes the job a snap.

Tire Bead Breaker

$59.95

"Tread Doctor" Knobby Cutting Tool


"Tread Doctor" Knobby Cutting Tool

Refresh your front or rear tire instead of throwing them out! Tread Doctor Lightweight heated tool lets you quickly cut new edges into your dull worn out knobby tires.

$8.95

Rim Protectors

Sold in pairs
Rim Protectors

Protect your wheels from scratches and dings caused by tire changing tools

Includes retrieval cord for easy use

$35.95

Mini-Morph Pump


Mini-Morph Pump

The Mini-Morph is actually a bicycle pump, but is probably the best compact pump we have found for adventure / dual-sport riding. It has a fold-out foot and handle as well as a 4 inch hose so you can set it on the ground to pump. At only 10" long, it is small enough to pack anywhere.

Select Size



Shinko 705


Shinko 705

From Shinko Tire USA, the 705 Series are DOT approved dual sport tires designed for 75% street and 25% trail riding. An aggressive tread pattern provides excellent wet and dry weather adhesion and the compound resists tearing while riding off road.

Select Size



Dunlop 606 DOT Knobby


Dunlop 606 DOT Knobby

Dunlop designed the D606 tire to be street-legal but with an emphasis on aggressive off-road riding and great durability. A full-depth tread pattern designed for rigorous off-road use yields excellent traction on everything from hard-packed fire roads to soft single-track trails. At the same time, the D606's tread compound is engineered for good highway durability and grip.

Select Size



Pirelli MT21 Rallycross


Pirelli MT21 Rallycross

This street-legal knobby from Pirelli has good stability and cornering precision thanks to the carcass stiffness. The tread pattern optimized for use on dirt and gravel roads, cross-country racing and desert tours. It has lasting off-road performance and knob tearing resistance due to the special off-road compound.

Select Size




Heavy Duty Tubes


Heavy Duty Tubes
  • Heavy-duty tubes made specifically for off-road and or motocross
  • German made, these are the sturdiest, highest quality tubes on the market
  • 3mm thick natural rubber construction helps resist pinch flats and is easier to patch than butyl rubber
  • Straight metal valve stem

Select Size


Supermoto Tubes


Supermoto Tubes

Designed for bikes that use tubes with radial tires, like supermoto and retro bikes with spoked wheels. Straight metal valve stem. Fronts fit 120/70 and 120/60. Rears fit 150/60, 150/70 and 160/60.

$44.95

MotoPressor Pocket Pump


MotoPressor Pocket Pump

The MotoPressor is a compact pump unit that weighs only 1.5 pounds and fits in the palm of your hand. MotoPressor very cleverly omitted the plastic housing you find on other pumps. This makes it smaller and easier to carry with you. Included is a 25 inch long inflator hose, with a hands-free lock-down delivery valve. You also get a SAE power cord that attaches to your battery and stays there. The Pocket Pump has an 8.5 foot cord to give your air supply plenty of reach. All this packs into a heavy duty neoprene pouch.

MotoPressor will pump the front or rear tire of your motorcycle from flat to approximately 30 psi in 2 minutes and is capable of pumping to over 100 psi. Use it to inflate tires, top off your air shocks, air forks, inflate air beds or anything else.

If you will use the MotoPressor on a CANbus BMW please click on the More Information button.

! Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery and bypasses the motorcycle's electrical CANbus system. The CANbus monitors and limits the amperage of the accessory outlet. When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working. It is not the fault of the Motopressor.

If you have a CANbus equipped bike and you are not SURE about using the accessory outlet, use the alligator clips to get power from your battery or better still connect the supplied SAE terminal connectors to your battery and get power from there.

$33.95

Mini Air Compressor


Mini Air Compressor

Portable 12v compressor is perfect for any tool kit. This unit weighs in at only 14oz and measures just 4"x2"x6".

Features a built in LED light and 0-120 psi gauge

• Comes with everything shown

$10.95

8-1/2 inch Tire Irons


8-1/2 inch Tire Irons

Here is a set of 'trail size' tire irons. At 8-1/2 inches long they are small enough to fit in a fender bag with your spare tube.

$17.95

Warp 9 Valve Stem Puller Tool


Warp 9 Valve Stem Puller Tool
Warp 9 Valve Stem Puller Tool

This ultra-cool little tool is used to pull the valve stem through the hole on motorcycle rims saving your finger tips when changing tires, fixing flats or any time the tube has to come out of the rim. It threads inside the valve stem making it easier to pull through the rim hole. You can use it as a valve stem puller, valve core removal tool or a tire deflator.

Handle is CNC machined and has a threaded hole in each end, one to hold and protect the threaded end of the tool and one for a spare valve core (not included). Anodized blue for good looks and corrosion resistance.

Slime


Slime

Slime Tube Sealant is formulated and tested for use in all tube tires. Once installed, Slime remains liquid and will not harden or dry out. Slime is guaranteed for 2 years.

As the Slime treated tube rotates, centrifugal force pushes the sealant to the tread area creating a layer of protection, repairing punctures as they occur and treating existing punctures. Slime is not intended for use in tubes losing pressure from sidewall punctures, bead leaks, damaged rims or faulty valves. Slime for tube type tires is not recommended for use in tubeless tires.

  • Prevents and repairs punctures up to1/8".
  • Remains liquid inside the tire, coating the tread area as the tire rotates.
  • Non-toxic, non-hazardous, non-flammable, non-aerosol and water soluble.
  • Tubes treated with Slime can be patched with a conventional vulcanized patch using a bit of patience and care.

Brakes

Back to Top

Select


EBC Sintered Brake Pads

CRF250L
EBC Sintered Brake Pads

Sintered Pads from EBC provide great performance in all conditions yet still give you long pad life. Front pads are double H rated for maximum breaking. Rear pads offer maximum durability and excellent braking performance.

Select


Galfer HH Sintered Brake Pads

CRF250L

Based on Advanced Ceramics, this compound is designed to deliver excellent performance in all aggressive scenarios. It offers very fast heat recovery for more consistent braking which, in turn, gives the rider more "feel" and control. These pads are very easy on rotors since they do not have the same levels of metallics in them as many O.E.M. and after-market brands.

Select


Galfer Steel Braided Brake Lines

CRF250L
Galfer Steel Braided Brake Lines

Steel braided lines have a Teflon tube as a core wrapped with a stainless steel wire braided exterior which doesn't allow the brake lines to stretch under pressure like stock rubber lines do.

The benefit is a firmer brake lever with better feel because the energy that was going into stretching the stock lines now goes straight to the brakes.

Select


EBC Contour Brake Rotors

CRF250L
EBC Contour Brake Rotors

Contour rotors are ultra lightweight OE replacement rotors made with tough and durable stainless steel. Heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last.

Select


EBC CX Extreme Brake Rotors

CRF250L
EBC CX Extreme Brake Rotors

The latest and greatest in motocross brake rotors featuring ultra lightweight radically profiled contours for great looks, great self cleaning and brake performance. Made with tough and durable heat treated stainless steel. Heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes at less than Manufacturer prices that will perform and last.

$44.95

Master Cylinder Guard

CRF250L (Made in USA)
Master Cylinder Guard
  • Protect the exposed rear brake master cylinder from damage
  • Fabricated from mild steel and expanded metal
  • Powder coated flat black
  • Easy installation with all required hardware provided

Controls

Back to Top
Select Bar

$41.95

Fly Handlebars


Fly Handlebars

These handlebars are high quality at an affordable price. Several bikes here in the shop use these bars and we like them.

  • 7/8" mounting area, fits stock mounts
  • Manufactured from 6061 T-6 aircraft aluminum
  • Knurled center section and clutch end
  • Bar pad included
  • Reduces rider fatigue by absorbing impact, shock and vibration

  • Different bend dimensions (see diagram for help)
  • CR High - W = 802, H = 99, R = 65, S = 54, B = 13 degree
  • KX/RM - W = 805, H = 93, R = 50, S = 55, B = 14 degree
  • YZ/WR - W = 803, H = 92, R = 56, S = 57, B = 15 degree

$10.95

ProGrip 714 Rally Grips

Our Favorite Grips!
ProGrip 714 Rally Grips

Replacing your handlebars? Time to replace those worn out grips? These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze.

Select Controller

BikeMaster Heated Grips


BikeMaster Heated Grips

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

$10.95

"Crampbuster" Cruise Assist

(Made in USA)
"Crampbuster" Cruise Assist

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but rather a simple clip-on device which allows you to relax your grip while riding.

Select Bar Size

$59.95

Powermadd 2" Handlebar Riser


Powermadd 2" Handlebar Riser
  • 4.75" wide, requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimum bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" or 1 1/8" bars
Select Bar Size & Color:

$109.95

Cycra ProBend Handguards


Cycra ProBend Handguards

Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select Color:

$139.95

Acerbis X-Factor Hand guards


Acerbis X-Factor Hand guards

New from Acerbis, these hand guards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest we have ever seen.

Works with 7/8" or 1-1/8" bars.

$21.95

Moose Molded Foam Handguards



Moose Molded Foam Handguards

Riding in the harsh conditions of winter? Good, we are too. These foam hand guards are great. You get the extra protection in bad weather to help keep your hands warm and dry. These just about double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain at bay.

Choose Size:

Doubletake Mirrors

Sold Separately
Enduro Mirror
Doubletake Mirrors
ADV Mirror
Doubletake Mirrors

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4" diameter

Ideal for dualsport use, where you want the absolute minimum profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter.

$22.95

Folding Dualsport Mirror

Sold separately
Folding Dualsport Mirror

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price of the KTM part. Fits either left or right side.

$49.95

Bar-End Mirrors

Sold in pairs
Bar-End Mirrors

Bar end mounted mirrors moves the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

$33.95

Steering Head Bearing Kit

CRF250L '13-'16
Steering Head Bearing Kit

Tapered roller bearings provide decreased maintenance, less wear, smoother operation and longer life. This set of high quality replacement steering stem bearings include:

  • Upper and lower tapered bearings
  • Upper and lower bearing races
  • Upper and lower seals

$44.95

Billet Aluminum Throttle Tube

CRF250L (Made in USA)
Billet Aluminum Throttle Tube
  • Machined and knurled 6061 billet aluminum
  • Removable end cap for easy handguard installation
  • Works with standard housing

OEM Replacement Levers

CRF250L
OEM Replacement Levers

Order up your new levers here! If you keep breaking levers, you might want to think about a set of handguards to protect them in case of a fall.

$26.95

Folding Shift Lever

CRF250L
Folding Shift Lever

Forged aluminum, black anodized arm and Knurled CNC aluminum shift tip.

12.95

Clutch Cable

CRF250L
Clutch Cable

OEM replacement clutch cable.

19.95

Throttle Cable Set

CRF250L
Throttle Cable Set

OEM throttle cable set.

Luggage Racks

Back to Top

$149.95

Pro Moto Billet Cargo Rack

(Made in USA) CRF250L
Pro Moto Billet Cargo Rack

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists

42" Long x 5/8" Wide 





60" Long x 1" Wide 




ROK Straps

The ultimate stretch strap
ROK Straps

These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hooks - tie down straps.

ROK Straps are a must have for any dual sport or adventure rider!



ROK Straps are a two-piece strap that has a quick-release buckle in the middle and loops on each end.
One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks
that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around
your frame, rack or other secure point and then back through the loop in the end making for a very secure
mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap
until your load is firmly held in place.

$14.95

Nomadic Racks RotoPax eXpander

(Made in USA)

This kit fits all Nomadic tubular type racks. (All flat stock racks are already RotoPax compatible)

The upper image shows the kit, which includes all the hardware and instructions required. The lower image is just an example of what the eXpander looks like mounted to one of their racks.

Nomadic Racks RotoPax eXpanderNomadic Racks RotoPax eXpander

Luggage

Back to Top

Saddlebags & Hard Cases


Saddlebags & Hard Cases

Choose from a huge selection of sidebags and hard cases from top brands.

  • Wolfman Luggage
  • Nelson-Rigg
  • Giant Loop
  • Moose Racing

Tank Bags


Tank Bags

Tank bags provide easy access to personal items and come in a variety sizes, styles, and colors.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop

Duffel Bags


Duffel Bags

Select from an assortment of sizes, designs, and brands.

  • Wolfman Dry Bags and Rolie's
  • Saddlemen Destination Pack
  • Givi waterproof bags
  • Firstgear Torrent bags

Top Cases


Top Cases

Top cases by Moose Racing allow easy access and transportation of items for long rides or daily commuting.

  • Expedition Aluminum Top Cases are a perfect match for the Expedition Side Cases. Available in 25 or 38 liter sizes
  • Expedition Hard Top Cases are perfect for daily commuting and errands around town. Available in 28 or 47 liter sizes

Fender Bags


Link to Fender Bags

Fender bags are perfect for carrying tools and tubes on any adventure.

  • Wolfman 1.25 Liter front fender bag
  • Moose Racing removable rear bag
  • Wolfman 3.5 Liter tool bag
  • Chase Harper rear fender pack

Accessories


Link to Luggage Accessories

Luggage accessories to complete your luggage set.

  • RotoPax fuel and water containers
  • ROK Straps
  • Universal Mounting Kits
  • Much more!

Helmets & Apparel

Back to Top

Dual Sport Helmets


We have put together a great list of dual sport helmets for any budget.

  • Arai XD-4 Dual Sport features great quality and looks
  • Shoei Hornet X2 for serious dual sport enthusiasts
  • Bell MX-9 Adventure new for 2015 is everything you want at a great price
  • AFX 41-DS Dual Sport features an inner flip down sun shield
  • Fly Trekker gives great quality and price

Rain Gear


Stay dry with quality rain gear by Frogg Toggs. Frogg toggs is committed to providing the best in affordable, innovative rainwear technology. ToadSkinz technology is a newly developed hybrid fabric that was engineered by the frogg toggs research team. This unique new material has the look and feel of a traditional polyester rain suit but with a non-woven inner layer that provides guaranteed waterproof and windproof performance in a lightweight garment with great breathability.

Gloves


Choose from a great selection of Firstgear dual sport gloves.

  • Ultra Mesh Gloves
  • Kilimanjaro Gloves
  • Kathmandu Gloves
  • Cold Weather Gloves
  • Many More!

Accessories


We have put some common sense dual sport items on our accessories section and will be adding stuff as we find it.

  • Hydration packs by Thor and Moose Racing
  • Backpacks from American Kargo and Moose Racing
  • Neck warmers and High-Vis vests

Dual Sport Apparel


Choose from top of the line jackets, pants and our every own ProCycle T-shirts

  • Kathmandu jacket and pants
  • Urge overkill Jacket
  • Adventure Mesh jacket
  • Firstgear Thermosuit
  • Kilimanjaro jacket
  • And more!

Heated Gear


Stay warm on those long winter rides with top of the line heated gear.

  • First Gear heated clothing features Nickel Alloy heating technology
  • Venture heated gear comes standard with harness and controller
  • Heat Pump Vest and battery powered gloves also available
  • Check out our Seat warmer and Heated grips

Footwear


Our favorite dual sport boots have been tested and approved by the ProCycle staff.

  • New! 100115 Forma Adventure Boots
  • Icon Raiden DKR Boots
  • Alpinestars Scout Boots
  • Gaerne Balance Oiled boots

Accessories & Tools

Back to Top

Maps and Navigation


Maps and Navigation

Check out our new Maps and Navigation page!

  • Butler Maps
  • Benchmark Maps
  • Delorme Maps
  • GPS Units

ProCycle NAVIGATOR


ProCycle NAVIGATOR

Navigation doesn't get any simpler than this. Here is the ProCycle 'binary' Navigator. Don't know which way to turn? Flip the NAVIGATOR and follow your nose. It is guaranteed to lead you somewhere. Probably some place you have never been.

$14.95

JIS Screwdriver Kit


JIS Screwdriver Kit

The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws are very easy to strip if you are using a regular Phillips screwdriver.

Here is a little kit that will make removing and replacing JIS screws much easier. A small portable handle with its own collection of 4 various bits, along with 2 each JIS No. 1, No. 2 and No. 3 bits. These will work in any other bit holders you may have and have a slight magnetic end to hold a screw while you start it.

$10.95

Super Siphon


Super Siphon

The Super Siphon makes it easy to transfer fuel from one bike to another; simply shake the hose to prime it and get fuel moving. With 5.5 feet of hose it is no problem to reach whatever needs a bit of your gas. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up and stuff it in your bag and you will be very happy when you need it one day.

$649.95 - $799.95

Garmin 390LM, 660LM and 665LM


Garmin 390LM, 660LM and 665LM
Garmin 390LM, 660LM and 665LM
Garmin 390LM, 660LM and 665LM
Garmin 390LM, 660LM and 665LM

Designed by riders for riders, the new Curvy Road routing leads you to the roads most fun on a motorcycle. This programming is standard on the Zumo 390LM. This unit is also equipped with a Tire Pressure Monitor System (valve caps purchased separately). It is bluetooth enabled so you can chat with your helmet on or just listen to the directions from your 390 so you can keep your eyes on the road where they should be.

Simply connect your Zumo with your cell phone and/or a bluetooth-enabled headset. Your Zumo unit will transmit voice prompts to your headset allowing you to hear the street names and navigation commands.

Each of these Zumo systems is designed with an on-board MP3 player so you can enjoy your music, podcasts, etc. Each Zumo also has a picture viewer so you can bring favorite photos along for the ride.

In addition to all these great features, each Zumo has a built-in trip computer with compass display. There's also a speed limit indicator so you know when to throttle down and avoid a ticket.

Another very handy tool is BaseCamp. This web based tool lets you create routes along specific roads and search for and save points of interest, restaurants and fuel stops. Upload your pre-planned trip to Zumo and follow along for a stress free ride. With BaseCamp you can combine track logs, waypoints, geotagged photos, YouTube videos and more into an adventure that you share online. Garmin Adventures is a free, interactive way to record and share your rides.

The Zumo 665LM has SiriusXM Satellite Radio, NavWeather and NavTraffic. Separate subscriptions required for these services.

Protected against water immersion for 30 minutes at a depth of 1 meter.

Click here to read the entire lifetime maps terms and conditions on the Garmin website.

$20.95

Dri Slide Cable Lubricant


Dri Slide Cable Lubricant

Goes on wet but evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, and prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.

$12.95

Feeler Gauges


Feeler Gauges

Dual marked feeler gauges. 32 blades  from .03mm/.001" to 1mm/.040"

Select Kit

Tool Kits


Tool Kits

Ready to go tool kits. Just toss it in your bag and hit the road or trail.

Standard Tool Kit (top) includes: Combo wrenches (10mm and 12mm) 8" adjustable wrench, 6-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 13/16"), cable ties, mechanic's wire, WD-40, tire pressure gauge and shop towel all enclosed in a heavyweight nylon shell with YKK zippers. Dimensions: 4" L by 9" W by 1-1/2" H.

Deluxe Tool Kit (middle) includes: Combo wrenches (10mm, 12mm and 14mm) 8" adjustable wrench, 6-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 13/16"), spark plug gap gauge, locking pliers, flashlight, electrical tape, cable ties, mechanic's wire, WD-40, tire pressure gauge and shop towel all enclosed in a heavyweight nylon shell with YKK zippers. Dimensions: 6" L by 9" W by 1-1/2" H.

Fanny Pack Tool Kit (bottom) includes: Combo wrenches (10mm and 12mm), 8" adjustable wrench, T-Handle PackWrench (8mm, 10mm and 12mm), Hex Key Set (4mm, 5mm and 6mm), 4-in-1 screwdriver, 2-in-1 spark plug socket (5/8" x 13/16"), locking pliers, needle nose pliers, 22mm Axle Hex Adapter, electrical tape, cable ties, mechanic's wire, 2 tire levers, tire pressure gauge and shop towel. All of these tools are in a 5040-denier nylon fanny pack designed to handle heavy abuse on the trails. Dimensions: 7" L by 10" W by 1-1/2" H.

$12.95

Anti-Seize


Anti-Seize

A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.

$17.95

Warp 9 Valve Stem Puller Tool


Warp 9 Valve Stem Puller Tool
Warp 9 Valve Stem Puller Tool

This ultra-cool little tool is used to pull the valve stem through the hole on motorcycle rims saving your finger tips when changing tires, fixing flats or any time the tube has to come out of the rim. It threads inside the valve stem making it easier to pull through the rim hole. You can use it as a valve stem puller, valve core removal tool or a tire deflator.

Handle is CNC machined and has a threaded hole in each end, one to hold and protect the threaded end of the tool and one for a spare valve core (not included). Anodized blue for good looks and corrosion resistance.

$29.95

Tire Bead Breaker


Changing tubes or tires without the right tools can be a real chore. Don't fight your snug beads any longer, use this 27" long tool that opens to 7-3/4" to provide the leverage you need to easily break your tire bead. Constructed from heavy-duty steel with comfortable no-slip grips, this tool makes the job a snap.

Tire Bead Breaker

$59.95

"Tread Doctor" Knobby Cutting Tool


"Tread Doctor" Knobby Cutting Tool

Refresh your front or rear tire instead of throwing them out! Tread Doctor Lightweight heated tool lets you quickly cut new edges into your dull worn out knobby tires.

$35.95

Mini-Morph Pump


Mini-Morph Pump

The Mini-Morph is actually a bicycle pump, but is probably the best compact pump we have found for adventure / dual-sport riding. It has a fold-out foot and handle as well as a 4 inch hose so you can set it on the ground to pump! This thing is small enough to stow away in any bag and go totally unnoticed until you need to add air after a flat or just pumping your pressures back up after some serious off-road action.

 

Mini-Morph Pump Mini-Morph Pump

$8.95

Motul C5 Chain Paste


A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes. Chain Paste is easy to carry with you on those long trips.

Motul C5 Chain Paste Motul C5 Chain Paste Motul C5 Chain Paste

$16.95

Chain Breaker Tool


Chain Breaker Tool

Here is a tool to help you remove a few links from a chain that is too long to fit your bike. A great tool to have in your tool box.

$28.99

Trimax Rotor⁄Disk Lock


Trimax Rotor⁄Disk Lock

This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.

Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.

$12.95

Moto Wash

1 Liter
Moto Wash

Moto Wash is a powerful cleaner and degreaser made by Motul. Safe on all paint, metallic components and plastics. Leaves a corrosion resistant film.

$49.95

Tie-Down Handlebar Clamps


Tie-Down Handlebar Clamps
Tie-Down Handlebar Clamps

These clever tie-down clamps give you an instant anchor point for tie-down straps using your hand grips.

  • Oval opening for single or double tie-down hooks
  • Clamps securely to any 7/8" handle bar grips
  • Machined from forged aluminum
  • Sold in pairs

$19.95

Deluxe Folding Saw


Deluxe Folding Saw

A must have when blazing new or old trails!

  • Soft rubber handle
  • Thumb latch release for safety
  • 8" blade, 9" folded length
  • Steel frame

$6.95

Cycle Wipes


Cycle Wipes

Cycle Wipes are pre-moistened and pre-folded towelettes made with a special non-woven "Dirt-Grabbing Mesh Fabric," which is a fancy way to say that they are soft, gentle, durable, and a lot safer than that old rag or paper towel.

Their formula contains no harmful ammonia and is specifically formulated for helmet face shields.

$9.95

Cable Luber


Cable Luber

Keep your cables lubed up and working freely. This tool is used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the far end, the cable is lubricated.

$25.95

Clutch Holding Tool


clutch tool

Clutch holding tool

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. From Motion Pro

$14.95

ThumbDogs


ThumbDogs

These simple add-ons stretch and grip to the finger of your favorite glove using Grrprr technology. Users can operate a phone or any touch screen device and never have to remove their nice warm gloves.

A special conductive material enables you to interact with capacitive touch screens quickly and easily. There are two ThumbDogs to each package so you can double digit type just like you would in the real world. You can also put one on your index finger to operate your GPS.

$33.95

Mini Air Compressor


Mini Air Compressor

Portable 12v compressor is perfect for any tool kit. This unit weighs in at only 14oz and measures just 4"x2"x6".

Features a built in LED light and 0-120 psi gauge

• Comes with everything shown

$17.95

Tirepro Digital Tire Gauge


Tirepro Digital Tire Gauge
  • Large display, readings are shown to 0.1 psi
  • Kpa and Kg-cm2 scales also provided
  • Reads up to 99 psi
  • Ergonomic shape fits nicely in your hand

$8.95

Rim Protectors


Rim Protectors

Protect your wheels from scratches and dings caused by tire changing tools

Includes retrieval cord for easy use

$13.95

The Grunge Brush


The Grunge Brush

Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes

$19.95

Master Link Pliers


Master Link Pliers

Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.

$38.95

WPS safety pliers


WPS safety pliers

6" wire twisting pliers with return spring mechanism for easy, safety wire twisting

•  Comes with 25' of .032 stainless steel wire

$5.95

Motul M4 Hands Clean


Motul M4 Hands Clean

A handy addition to the tool box or in your traveling pack. This is amazing stuff! Rub a little bit of the paste onto your dirty hands and it lifts the dirt right off. A little more rubbing turns it into dry flakes that brush away. M4 Hands Clean is not messy or greasy.

$12.95

Tow Strap


Tow Strap

When you need the Buddy Tow, it's priceless! This is the only tow strap made expressly for motorcycles and ATVs. Tucked away in its carrying case attached to you handlebar or crossbar, the Buddy Tow is always ready when you need it.

This simple accessory - 12' of 1785 lb. test strength 1" webbing in a handy carry pouch should be a standard part of every rider's kit. Whether used to tie your bike down in a truck or ferry boat's car deck, tow a friend into the nearest gas supply or hold down a tent the Buddy Tow has endless uses.

$19.95

Waterproof First Aid Kit


Waterproof First Aid Kit Waterproof First Aid Kit

Kwik Tek waterproof first aid kit is the perfect size for your "Don't leave home without it" list.

$17.95

Wizards Mystic Spray Wax


Wizards Mystic Spray Wax
  • Synthetic spray wax technology
  • Outstanding gloss, clarity, depth, and slickness
  • Use on any hard surface including plastics, rubber, glass, chrome, paint, and fiberglass
  • Fills minor scratches and cob-webbing

$99.95

Rigid Halo LED Flashlight


Rigid Halo LED Flashlight

This is not just a flashlight, but a tool - seriously. With 800 lumens using just 10W, it can go for almost 3 hours using a single rechargeable AA battery. 1000' of visibility means that this could be used as a signaling device in an emergency and in fact has a setting that emits SOS strobe in Morse Code. There are 5 different settings:

  • High mode – 800 lumens
  • Medium mode – 500 lumens
  • Low mode – 200 lumens
  • Strobe light
  • SOS Strobe in Morse Code

Package includes black anodized flashlight, AA rechargeable battery and charger. With a beam like this, a SOS strode, you can't live without this. Good for rides, camping, just about anywhere.

Didn't find what you are looking for?
We have millions of parts and accessories not listed on our site available from our vendors.