Stators, Lighting & High Output

Higher Output Stator that is part of their Hot Shot Series product line for your Yamaha TW200 Dual Sport with stator OE# 4WP-85510-10-00. Rick's has field tested to show a 26.3% increase in electrical power. 

This stator will bring the output from 175W up to 221W to support your added gear. Whether you have heated grips or you're running multiple aux lights, this unit will give you the power that you're looking for.

This high output stator will allow you to run brighter lights, heated gear, heated grips, etc. From ElectroSport

A new high output stator for the XR650L. 25% more output than the stock unit. Approximately 50 additional watts. Now you can have enough power to run those driving lights and/or heated riding gear!

New Hot Shot Suzuki Stator: aftermarket stator is made with heavy duty components and is a direct replacement for OE# 32101-32E01 or 32101-32E00. 

This stator will provide your bike with 20% more power to support your added gear. Whether you have heated grips or you're running multiple aux lights, this unit will give you the power that you're looking for.

• Separate circuits for lighting and ignition
• 95 Watt lighting output
• Fits under the stock flywheel with no modification
• Replaces the stock OEM stator

A HIGH output performance stator that replaces the OEM stator in the Honda XR400R and XR650R models.

ElectroSport designed this to have two sets of output windings: one is floated from ground and has two output leads, and the other is grounded on one side. Both windings also have different winding configurations to ensure optimum output.

Built on a modern stator core made of highly magnetically conductive material. They install the highest grade copper wire using their state-of-the-art computer controlled winding machines and they connect high quality lead wires that are both abrasion and heat resistant.

This stator comes with high grade rubber seals and connectors installed and as such is a plug in replacement.

Even if you don't need the extra lighting or charging output you can still use it as a straight replacement for the OEM stator and it is a very cost effective solution that way.

• Separate circuits for lighting and ignition
• Two output circuits (100w & 50w)
• Fits under the stock flywheel with no modification
• Replaces the stock OEM stator

Lighting stators allow you to power a headlight and other electrical accessories, even if your bike originally does not have a lighting stator. Lighting stators contain two separate circuits, one for ignition & one for lights, so installing one will not effect the way your engine runs.