Phones are OPEN
Toll-Free: 1-800-496-5516
Hours: Mon-Fri, 9:30am - 5:00pm PST


Back to Top


New! 102814

ProCycle Rev Box

CRF/XR 80/100 UP TO 2014

ProCycle Rev Box increases the rev limit to 10,000 RPM. In addition, this unit offers a re-mapped timing curve which yields a noticeable increase to horsepower and torque over the stock CDI

This CDI box is a direct plug in replacement CDI. Simply locate and remove the stock CDI, and plug the unit directly into the wiring harness, no modification needed. Suitable for stock and modified machines


BBR Big Bore Kit 120cc, with Camshaft

CRF/XR100R '81-up

Complete big bore kit. Bolt it on and ride!

  • Includes a pre-bored, big-finned aluminum cylinder for improved cooling
  • Cylinder, rings, piston pin, & clips
  • BBR exclusive performance camshaft
  • Heavy-duty valve springs
  • Rockers with tappet adjusters
  • Gasket kit


BBR Rev Box

CRF/XR 80/100 '93-up

Eliminates the 9800 rpm rev limiter and provides a hotter advance curve.

Not available at this time


HotCams Performance Camshaft

XR80/100 '85-up

Excellent midrange and top-end increase. Uses stock valve springs and rockers.

Fuel Systems

Back to Top
Choose Type:

Small Fuel Filters - 90 Degree or straight

click to enlarge fuel filterclick
The small size and right angle hose barbs make it easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1 5/8" long.


K&N Air Filter

XR/CRF 80/100 '85-up
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Designed to fit inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike


Back to Top
Choose Tooth Count:


Front Sprocket

(Made in USA) CRF/XR 100 '85-up

Machined from impact and wear resistant chromoly steel. Heat treated, then finished with a nickel coating for corrosion resistance.


BBR Chain Guide

XR/CRF 80/100 '85-up

Fully wraps the chain to guide it onto the rear sprocket. Stainless steel hardware, anodized aluminum plate, and plastic buffer for low friction. Saves expensive engine cases.

Choose Tooth Count:


Rear Sprocket

(Made in USA) CRF/XR 100 '85-up

Black hard anodized alloy sprocket. Machined sprockets made from 7075 T651 aluminum reduces distortion and provides optimal thickness, to extend sprocket and chain life.


BBR Heavy Duty Clutch Springs

XR/CRF 100 '93-up

Heavy duty springs help prevent clutch slip in high-performance motors.

  • Custom wound from chrome-silicon wire
  • Preset for long life
  • Higher spring seat pressure to resist clutch slip


Back to Top


BBR Fork Springs

XR/CRF 100 '85-up

Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids.

  • 30% stiffer than stock
  • Preset and stress relieved for long life
  • Custom wound from aircraft quality spring steel


BBR Shock Spring

XR/CRF 100 '85-up

Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids. Fits stock shock.

  • 30% stiffer than stock
  • Preset and stress relieved for long life
  • Custom wound from aircraft quality spring steel
  • Powder coated finish


Back to Top


BBR Quiet Core

Replace your BBR standard exhaust screen with this to reduce the sound level of your bike.

  • Fits all BBR exhaust systems with removable spark arrester screen
  • Easy 2 minute installation by removing the 3 end-cap bolts
  • Reduces sound output with minimal increase in back pressure
  • Makes your neighbor happy without ruining your bike's power delivery


Back to Top
Choose Type:


ProCycle Supermoto / Flattrack 17" Wheel Set

Complete set of supermoto wheels. We custom build our wheels to fit your bike!

Unlike other supermoto wheels that use aftermarket hubs, our supermoto wheels are built on OEM hubs for maximum compatibility with your bike!
Stock hubs allow you to use the rotors and sprockets built for your bike instead of expensive and difficult to obtain parts for aftermarket hubs.

Our Supermoto wheels are carefully laced and trued to provide you with a solid, high-quality wheel.
We use high quality Excel rims and Buchanan's heavy gauge spokes and heavy-duty nipples. All bearings and seals come pre-installed.

  • New OEM hubs
  • Excel 2.5"x17" front & rear rim, clear-anodized aluminum
  • Buchanan's stainless steel heavy gauge spokes
  • Buchanan's heavy-duty zinc-plated nipples
  • Bearings and seals pre-installed
  • Upgrade to Sun Rims and get 2.75"x17" front and rear rims

Notice! All our wheels are custom built to order, please allow 2-3 weeks for delivery. Once ordered, custom wheels, rims or spokes cannot be cancelled or returned..

Choose Rims:

Excel Rim & Spoke Sets

Silver Excel rims are lighter and much stronger than the stock steel rims.
Choose either:

  • Stock 19"/16" MX
  • 2.5x17" supermoto/flattrack
  • Allow 2 weeks lead time on these custom rims/spokes


Warp 9 Valve Stem Puller Tool

This ultra-cool little tool is used to pull the valve stem through the hole on motorcycle rims saving your finger tips when changing tires, fixing flats or any time the tube has to come out of the rim. It threads inside the valve stem making it easier to pull through the rim hole. You can use it as a valve stem puller, valve core removal tool or a tire deflator.

Handle is CNC machined and has a threaded hole in each end, one to hold and protect the threaded end of the tool and one for a spare valve core (not included). Anodized blue for good looks and corrosion resistance.


Back to Top
Choose Type:

EBC Brake Shoes

XR/CRF 100 '85-up
  • Sintered Pads are best for regular riding. Long life, and good performance in all conditions
  • Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand
  • Race Sintered are designed for racing use

Other Parts

Back to Top


BBR Billet Gas Cap

CRF/XR 80/100 '01-up
  • Billet machined aluminum gas cap with gold anodized breather
  • Large grip area for easy spin on/off


Clymer Repair & Service Manual

'75 - '91 XR75, XR80, XR100, XL75, XL80, XL100S


BBR Aluminum Frame Cradle

CRF/XR 80/100 '85-up
  • Protects engine from rocks, logs, and other obstacles
  • Prevents frame stretching
  • Black anodized lightweight & strong aluminum
  • Bolts on in minutes
  • All hardware included
  • Prevent the costly replacement or repair of a frame!


Lighting Stator

CRF/XR 80/100 '92-up
  • Separate circuits for lighting and ignition
  • 95 Watt lighting output
  • Fits under the stock flywheel with no modification
  • Replaces the stock OEM stator
Didn't find what you are looking for?
We have millions of parts and accessories not listed on our site available from our vendors.

Our credit card processing is done on secure servers by Authorize.Net. We can also handle your order by phone, email, or postal mail if you are not comfortable entering your card information online or wish to pay with a check or money order. If you wish to pay with PayPal click on the PayPal logo below for instructions.

Visa, Discover, Mastercard,  PayPal

Copyright ProCycle, Inc.

1815 Main St #F
SpringfieldOR 97477